Yamuna Expressway Industrial Development Authority Tender

Supply & fixing of MS rod for earthing with 2.5 m long, solid, 20 mm dia hot dipped galvanised MS rod buried till the top reaches 1.7 mts. Below the GL complete with bolts & nuts & GI earth wire 7/14. Analysis of rates-44

Supply, delivery, laying testing & commissioning of 11KV (E), XLPE cable having compacted circular staranded aluminium conductor, conductor screening of extruded semi conducting compound, cross linked polythylane (XLPE), insulation screening of the extruded semi conducting compound followed by copper tape, cores laid up, taped PVC inner sheath, single layer of steel strip armouring, overall PVC outer sheath conforming to IS: 7098 (Part-amendments) for following mentioned sizes.

It should be operational at 11 KV, 50 Hz. AC system in ground at a depth of 1200 mm below ground level over a cushion of 75 mm thick sand alround and protected with bricks on sides and top on surface the cable run shall be fixed on M.S. clamps etc of suitable size or as directed by the E/I. Complete in all respect. The price are inclusive of all earth work such as digging, back filling, supply & spreading of good earth all around the cable, supply & providing cable identification markers. The installation should be complete in all respects and as per requirement of the job. (CCI (Bombay/Nashik), Fort Gloster (Calcutta / Baripara), Asian (Thane / Silvasha), Universal (Satna), Nicco (Calcutta), ICL (Rajpura), Diamond, Havells make Analysis of rate (a) 3CX150 Sqmm.

Supply, Delivery, Installation, Testing & Commissioning of 11 KV Out door type cable termination kit of 3 core cable for cable termination at the panel & transformer complete in all respects as required for proper completion of work. (650mm length) A.R-6 (make Raychem/C.C.I./Frontec) (a).3CX150/185 Sq.mm.

Supply, installation & erection of 9.00mtr. high galvanized octagonal pole with bottom 155 mm A/F, top 70mm A/F made up of 3mm thick HT plate along with 260mm x 260mm x 16mm base plate along with 1.50 mtr. long Double arm bracket made of 48.3 x 3.25mm thick G.I. pipe and foundation bolts on plinth size 1700mm x 450mm x 450mm (M-25 Grade) with M24-J type Anchor bolt of size 750mm long x 24mm dia and size of base plate 260mm x 260mm x 16mm with rubber gasket complete in all respect (As per drawing) (make Bajaj, Philips, Paruthi, Surya, BP Projects) (IS Code: 4759, IS 2633, IS 2629) Analysis of rate

Supply and fixing of 70W - 72W LED street light fitting on pole complete in all respect. (Make Philips, Crompton, Bajaj,) (IP66 protected, single piece LM6 high pressure aluminium die cast housing capable of delivering a nominal system lumen output of minimum 7000 lumens with a minimum system efficacy of 105 lumen/watt and a CRI greater than 70. The luminaire shall have a life class of 50,000 hours @ L70 for a design ambient of 35 Deg. C and driver efficiency of 85%. IP 66 and IK 05.PF 0.95 and THD10% and operating voltage range of 140-270V. Manufacturer name to be embossed on the luminaire, peanut lens with lens plate. Internal surge protection of 4 KV. Pressure die cast housing with toughened flat glass/polycarbonate cover Manufacturer must have in house Govt. approved NABL laboratory for testing LM79 parameters for the offered luminaire) Analysis of rate

Supply & laying of aluminium conductor, XLPE insulated, armoured served, sheathed cable 1100 V grade at a depth of 750mm below ground level over a cushion of 75mm thick sand alround and protected with burnt bricks on sides and on top. On surface the cable run shall be fixed on M.S. clamps etc. of suitable size or as directed by the E/I, complete in all respect. The armouring of the cable shall be properly connected with the earth conductor by clamps etc. [CCI (Mumbai/Nasik), Fort Gloster (Kolkata), Asian (Thane/Silvasa), Universal (Satna), Nicco (Kolkata/Baripara), ICL (Rajpura), Diamond, Havells make] & for small works upto value of cable for Rs. 25.0 Lacs Kalinga (Gold), Suraj, Delton, Grandly & Polycab make can be used) as per direction of Engineer-in-charge Analysis of rates-1

4 C x 16 Sqmm

3.5C x 70 Sqmm.

S/F of copper conductor XLPE insulated, un-armoured cable .3C x 1.5 Sqmm AR

Supply & fixing of palm or pin type copper tin plated cable socket (lug) to the cable leads, making connections etc. complete in all respects as per direction of the Engineer-in-charge. (PS-504)

16 Sqmm.

70 Sqmm

Supply, fixing & installation of outdoor type panel fabricated with GI sheet Powder coated, Double door feeder pillar Box for street light automation of size 800 X 650 X 300mm duly hinged with locking arrangement fitted with one no. 3 pole 125 Amp. MCCB for Incomer with 150 Amps. TPN Alu. Bus Bar of size 25mm x 6mm. The suitable length feeder pillar shall consist of digital time switch DC operated 12V & 25A. The controller with SMPS should be in capability of Individual Phase operation in case of unavailability for any of phases. The Unit must covering neutral failure Protection.

The Contactor must be 1 no in 140 Amp. 3 pole Pre magnetic type Contactor of Subtech make. The outgoing of the panel having 2 nos 63 Amp. 3 Pole MCB with heavy duty power terminal for Outgoing & 1 no. 6 Amp. MCB for controlling, complete with internal copper wiring and all items to be fitted on channel inside the feeder pillar. The panel must complied with IEC60947 part-2, revised 2012 with IP 55 Standard for protection. This is to be installed on plinth/angle iron frame. .Analysis of rate

S/F of 600mm x 600mm x 6.0mm G.I. plate, vertically for earthing with its top at least 3 Mtr. below ground level complete with 20 mm dia G.I. pipe & funnel for watering & one earthing lead of one no. 8 to SWG GI wire in 15mm dia G.I. pipe upto switch board (from apron to switch board the cost of GI pipe and GI wire will be extra) 30cm square C.I. frame with hinged cover masonry housing alternate layers of char-coal/coke & salt atleast 150 mm thick all-around etc. as per direction of Engineer-in-charge complete in all respects. (PS-702)

Providing and fixing 6 SWG dia G.I. wire on surface or in recess for loop earthing as required. [DSR(E&M)-2016/5.16/P-28]

Supply and laying of 25mmx3mm G.I. strip from earth electrode directly in the ground as required complete in all respect. (PS-710)

S/L of 120mm dia DWC pipe for drawing of power cable across the road by drilling of 150mm dia at 1 mtr. below the road level thereby doing the work of providing DWC pipe by Manual trenchless method Analysis of rates-57

Numbering of poles with combination of yellow and black colour paint etc. complete in all respects as per direction of E/I at site. Analysis of rates-45

S/F of 11 KV TPMO set of ‘Relco’ make or equivalent with insulators and other accessories required for proper completion of work. Analysis of rate-39

S/F of 11 KV Drop-out type fuse set channel type of ‘Relco’ or equivalent make with insulators and other accessories required for proper completion of work. Analysis of rate-40

Supply, delivery, assembly, installation, testing and commissioning of Out door type distribution transformer. 11/0.433 KV, 3 Phase, Voltage ratio 11000/433-250 Volts, vector group Dyn 11. Air cooled with manually operated – 10% and +5% off load Tap changer and complete with standard fitting & accessories as given in the specification and also confirming to ISS : 2026 with firsh filling of the oil complete as required. (This includes oil testing for dielectric strength, flask over test and filtration of transformer oil to be conducted in the event of unsatisfactory results of oil testing. as per the directions of the Engineer-in-charge (Analysis of Rates) (a) 63KVA Aluminium wound