Yamuna Expressway Industrial Development Authority Tender
... More
If you're a registered bidder for etender UP and want to inquire about any e-tender UP government has posted, this is your stop. No need to enter every detail on the website of etender.up.nic.in - BidAssist filters will help you find the exact UP etender you're looking for. Read to learn how to search & bid for etender UP.
Yamuna Expressway Industrial Development Authority - YEIDA Tender
Eprocure
Opening Date12 Nov 2020
Closing Date27 Nov 2020
Tender AmountRefer Documents
Costs
EMD
₹ 13,69,000Document Cost
₹ 1,770Tender Fee
Refer Documents
Description
Scription for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user
Contact
Tender Id
2020_YEIDA_527993_5Bid Award Id
ViewTender No
YEA/GM(PROJECT)/2020/428 DT-02/11/2020Tender Authority
Yamuna Expressway Industrial Development Authority ViewPurchaser Address
-Website
http://etender.up.nic.in
GEM & Bid Advisory Services
Get portal registration, tender bidding, product/service listing or vendor/MSME certification services at a nominal cost
Documents
BOQ Items
... More
33kV HT PANELS
-
-
-
... More
Indoor type 6 panel board Vacuum circuit breaker (1 No. Incomer 1250 Amps+ 2 No. Outgoing 1250 Amp+ 2 No. Tie Feeder 1250 Amp+ 1 No. Bus Coupler 1250 Amp) 33 KV, 3 phase, 31.5 KA for 1 sec. HT switch gear with all necessary protection, metering and other accessories as required (A.R-96)
1
-
8997989
... More
Indoor type 2 panel board Bus PT, 33 KV, 3 phase, 31.5 KA for 1 sec with all necessary protection, metering and other accessories as required )A.R-97)
1
-
374751
... More
Supply, Installation, testing & commissioning of out door type 10 MVA with on load tap changer Power Transformer as per ISI specification including loading, unloading, local carriage & erection of the same on plinth & making all necessary connection etc. Complete in all respects as per specification(Make ABB/Crompton/Schinider) E-12.Cable termination box with disconnecting facility for 33 KV XLPE cable at 33 KV side.cable termination box with disconnecting facility for 11 KV XLPE cable at 11 KV side.
-
-
-
... More
On load tap changer+/- 7.5@2.5%,Bi directional roller,Conservator with drain valve,Earthing ferminals,Double diaphragm explosion vent,Radiator with top & bottom shut off valve,First filling of oil including make up fill,Silica gel breather with oil seal,Rating and diagram plate,Air Release plug,Buchholz relay with shut off valve,Winding temperature indicator (WTI),Oil temperature indicator (OTI),Megenatic oil level guage,Pressure relief device,Marshalling box.No load losses-8Kw, load losses 50KW,Toleronce as per I.S (A.R-15)
2
-
9355842
... More
11kV HT PANELS
-
-
-
... More
Indoor type 12 panel board Vacuum circuit breaker (2 No. Incomer 1250 Amps, 1 No. bus coupler 1250 Amps and 9 Nos.630Amp Outgoing) 11 KV, 3 phase, 25 KA for 1 sec. HT switch gear VCB breaker with all necessary protection, metering and other accessories as required. (A.R-96B)
1
-
7880279
... More
Indoor type 2 panel board Bus PT, 11 KV, 3 phase, 25 KA for 1 sec with all necessary protection, metering and other accessories as required (A.R-98)
1
-
271947
... More
DC BATTERY, CHARGER & DISTRIBUTION BOARD
-
-
-
... More
Supplying, assembling, installation, commissioning of Sealed maintenance free (SMF) 110V D.C., 200 AH batteries. The batteries shall rest on treated wooden planks fabricated from MS angle and free standing floor mounted rack with acid resistant finish and complete with series connecting electrical leads and charging of batteries. The batteries shall be accompanied with tester. This shall have incoming leads as well as outgoing leads and of suitable battery charger for 8 hrs charge of 200AH battery charger enclosed in sheet metal with fan on top and it should automatically charge the batteries With booster and trickle charge.
-
-
-
... More
Charger shall be complete with incoming & outgoing leads and D.C. Distribution board will have one set of 63 amps MCB as incomer and ten number of suitable rated MCB (as per coil rating of VCB) on outgoing side enclosed in metal sheet enclosure of 2mm thick and suitably painted. The unit will be complete with bus bars, accessories, links, terminal strip, clamps etc along with cables up to incoming & outgoing to VCB panels. (A.R-89)
1
-
268026
... More
HT CABLES & CABLE TERMINATIONS
-
-
-
... More
Supply, delivery, laying testing & commissioning of 33KV (E), XLPE cable having compacted circular staranded aluminium conductor, conductor screening of extruded semi conducting compound, cross linked polythylane (XLPE), insulation screening of the extruded semin conducting compound followed by copper tape, cores laid up, taped PVC inner sheath, single layer of steel strip armouring, overall PVC outer sheath conforming to IS: 7098 (Part-amendments) for following mentioned sizes.
-
-
-
... More
It should be operational at 33 KV, 50 Hz. AC system in ground at a depth of 1200 mm below ground level over a cushion of 75 mm thick sand alround and protected with bricks on sides and top on surface the cable run shall be fixed on M.S. clamps etc of suitable size or as directed by the E/I. Complete in all respect. The price are inclusive of all earth work such as digging, back filling, supply & spreading of good earth all around the cable, supply & providing cable identification markers. The installation should be complete in all respects and as per requirement of the job.
-
-
-
... More
(CCI (Bombay/Nashik), Fort Gloster (Calcutta / Baripara), Asian (Thane / Silvasha), Universal (Satna), Nicco (Calcutta), ICL (Rajpura), Diamond, Havells make
-
-
-
... More
33kV, 3C X 400 sq. mm. from 33kV HT Panel to 33/11kV Power transformer (A.R-4)
50
-
3112
... More
11kV, 3C X 300 sq. mm. (From 33/11 Power Transformer to 11 KV HT Panles) (A.R-3)
200
-
1950
... More
Supply, Delivery, Installation, Testing & Commissioning of 33KV, following type cable termination kit complete in all respects as required for proper completion of work. (make Raychem, CCI, Frontec)
-
-
-
... More
33kV, 3C X 400 sq. mm. XLPE insulated, Aluminum conductor E grade, strip armoured cable (A.R-10D)
2
-
33276
... More
11kV, 3C X 300 sq. mm. XLPE insulated, Aluminum conductor E grade, strip armoured cable (A.R-5D)
8
-
15140
... More
Supply, Installation, testing and commissioning of Outdoor REYCHEM RPG push on type termination kits suitable for following sizes of 33 & 11 kV, XLPE insulated Aluminum conductor E grade, strip/round wire armoured cable.
-
-
-
... More
33kV, 3C X 400 sq. mm. XLPE insulated, Aluminum conductor E grade, strip armoured cable from 33kV HT Panel to 33/11kV Power transformer (A.R-10D)
2
-
53879
... More
11kV, 3C X 300 sq. mm. XLPE insulated, Aluminum conductor E grade, strip armoured cable (A.R-6D)
4
-
22093
... More
CONTROL CABLE
-
-
-
... More
Supply, Installation, testing and commissioning of Control cables of following sizes to be laid buried in ground or laid on cable trays for transformers and VCB
-
-
-
... More
1.1kV GRADE STRANDED COPPER CONDUCTOR, PVC INSULATED WRAPPED PVC INNER & OUTER SHEATHED CABLE.
-
-
-
... More
CABLE 4CX2.5SQMM (A.R)
200
-
143
... More
CABLE 19CX1.5SQMM (A.R)
200
-
345
... More
Supply, Installation, testing and commissioning of Cable end terminations/Glands/lugs for 1.1kV grade stranded copper conductor, pvc insulated wrapped pvc inner & outer sheathed cable for transformers and VCB.
-
-
-
... More
CABLE 4CX2.5SQMM (A.R)
4
-
149
... More
CABLE 19CX1.5SQMM (A.R)
4
-
168
... More
DISTRIBUTION BOARDS
-
-
-
... More
Supplying and fixing following way prewired TP&N MCB distribution board of steel sheet for 415 volts on surface/ recess complete with loose wire box, terminal connectors for all incoming and outgoing circuits, duly prewired with suitable size FR PVC insulated copper conductor up to terminal blocks, tinned copper bus bar, neutral link, earth bar, din bar, detachable gland plate, interconnections, powder painted including earthing etc of DB's (FOR LIGHTING & SMALL POWER)
-
-
-
... More
Note- Each incoming and outgoing MCB's shall have Ics = 10 kA minimum
-
-
-
... More
12 Way TPN DB Incoming
1 No. 63A 4P MCB 3 Nos. 40A DP ELCB in each incomer (100 mA Sensitivity)
Outgoing
36 Nos 6/16A SP MCB's spread equally in each phase. (A.R)
2
-
37769
... More
POWER SOCKETS
-
-
-
... More
Supply, Installation, testing and commissioning of OF POWER SOCKETS,SWITCH COMPLETE WITH ACCESSORIES LIKE GI BOXES,SHEET STEEL ENCLOSURE ETC. AS REQUIRED.
-
-
-
... More
2 Nos. 6/16 Amps 5 pin socket controlled by separate 16 Amps modular type switch for each socket housed in GI box of suitable size (UPS socket for computer). (DSR 1.24.5 & 1.32 (2018)
2
-
677
... More
6/16 Amps 6 pin socket controlled by 16 Amps modular type switch housed in GI box of suitable size. (DSR 1.24.5 & 1.32 (2018)
33
-
677
... More
Flame proof/Retardent type 6/16 Amps 6 pin socket controlled by 16 Amps modular type switch housed in GI box of suitable size. (M.R.(MDS-LEGRAND)M.R.
3
-
1361
... More
Supplying and fixing 20 amps, 240 volts, SPN industrial type,socket outlet, with 2 pole and earth, metal enclosed plug top alongwith 20 amps “C” curve, SP, MCB, in sheet steel enclosure,on surface or in recess, with chained metal cover for the socket out let and complete with connections, testing and commissioning etc. as required. (DSR 2.18 (2018)
5
-
1244
... More
63 A TP metal clad industrial socket controlled by 63 A TP MCB housed in sheet steel enclosures (DSR 7.41 & 2.9.1(2018))
2
-
6383
... More
LIGHTING FIXTURES
-
-
-
... More
Supply, Installation, testing and commissioning of lighting fixtures shall include the supporting steel structures, clamps/connectors and all other accessories required for proper fixing of the lighting fittings.
-
-
-
... More
Supply of luminaires complete with accessories like lamps, ballasts, power factor improvement capacitors, starters etc as an integral part of luminaire. However, in case of Non-integral type luminaires rate shall include separate metal enclosed control gear box with terminal block suitable for loop-in, loop-out connection. Outdoor type fixtures shall be provided with outdoor type weather-proof box with IP 54 or better. All fixtures shall be wired with Electronic ballast.
-
-
-
... More
2x28W Surface mounted fixtures complete with choke, starter, T5 lamps etc.(Wipro catalogue no.WIF 20228/equivalent) (A.R)
48
-
1910
... More
2x28/36W Surface mounted flame proof type fixtures complete with choke, starter, T5 lamps etc.(Crompton Greaves-EXTL240/equivalent) (A.R)
2
-
24109
... More
2x18W surface type compact fluorescent fixtures complete with choke, starter, tube etc.(Wipro catalogue no.WVP 45218/equivalent) (A.R)
4
-
1843
... More
2x28W recessed mounted fixtures complete with choke, starter, T5 lamps etc.(Wipro catalogue no.WVF 58228/equivalent) (A.R)
10
-
3985
... More
2x28W outdoor type wall mounted fixtures complete with all accessories as required.(Philips HGS-120 or Equivalent) (A.R)
5
-
3064
... More
250W Metal halide flood light including 1 X 250W Metal halide lamp, control gear box etc. complete with all accessories.(Wipro- WFZ 42250 or Equivalent) (A.R)
2
-
9120
... More
CEILING / WALL BRACKETS/ EXHAUST FANS
-
-
-
... More
Supply, Installation, testing and commissioning of 1200mm dia sweep ceiling fan with standard down rod. (A.R)
9
-
1866
... More
Supply, Installation, testing and commissioning of Oscillating type wall fan 400mm dia. (A.R)
2
-
2147
... More
Supply, Installation, testing and commissioning of 300mm dia heavy duty 900 RPM exhaust fan complete with louvered shutters. (A.R)
10
-
2522
... More
POINT WIRING
-
-
-
... More
Supply, Installation, testing and commissioning of materials and wiring for light point, fan points with fan box, exhaust points, 6 Amps plug sockets etc. with 2 x 1.5 sq.mm FRLS PVC insulated, flexible multistranded copper conductor wires laid in PVC conduit in slabs, walls, above false ceiling along with 1 X 1.5 sq.mm FRLS PVC insulated, flexible multistranded copper continuous earth wire with all accessories, cutting chases in walls and making them good including providing 6 Amps modular type switches, sockets in boxes of suitable size
-
-
-
... More
(The box should be of adequate sizes to accommodate fan/ exhaust fan regulator wherever required) embedded in wall/ partition wall including circuit wiring with 2 x 1.5 sq.mm. FRLS PVC insulated flexible multistranded copper conductor along with one run of 1.5 sq.mm. FRLS PVC insulated flexible multistranded Copper earth continuity wire from respective MCB in DB to first point and making the electrical connection on either ends for the following points:
-
-
-
... More
Group-C
Note:-Telephone, computer wiring are not in the scope of electrical works. (DSR 1.10.3 (2018)
92
-
1000
... More
SUB-MAIN WIRING
-
-
-
... More
Supplying all the materials and wiring for sub mains and circuit wiring in concealed or open fashion in slabs, walls, above false ceiling, on walls or overhead trusses, terminating the conductors in respective panels, DBs, switch boxes with PVC conduit of suitable size FRLS PVC insulated, flexible multistranded conductors/earth continuity copper wires etc. as given.
-
-
-
... More
2 x 2.5 sq.mm copper wires along with one 2.5 Sqmm FRLS PVC insulated, flexible multistranded copper continuous earth wire (for computer terminals from UPS DBs) (DSR 1.14.2 (2018))
50
-
169
... More
2 x 4 sq.mm copper wires along with one 4 sq.mm FRLS PVC insulated, flexible multistranded copper continuous earth wire.(for 16 A sockets) (DSR 1.14.3 (2018))
300
-
202
... More
2 x 6 sq.mm copper wires along with one 6 sq.mm FRLS PVC insulated, flexible multistranded copper continuous earth wire.(for 20 A AC sockets) (DSR 1.14.4 (2018))
100
-
352
... More
4 x 16 sq.mm copper wires along with 2 x 16 sq.mm FRLS PVC insulated, flexible multistranded copper continuous earth wire.(for 63 A sockets) (DSR 1.14.11 (2018))
100
-
760
... More
EARTHING SYSTEM
-
-
-
... More
Supply, Installation, testing and commissioning of earthing system
-
-
-
... More
GI PLATE EARTHING FOR TRANSFORMERS BODY AND HT PANELS
-
-
-
... More
Supply, Installation, testing and commissioning of the necessary materials for 600x600x6 mm thick GI plate earth station with salt and charcoal layer all round including excavation of earth, back filling, dressing and making manhole at ground level along with CI manhole cover, funnel and GI pipe for water complete in all respects as per IS : 3043. (DSR 5.4 (2018))
8
-
6278
... More
CU PLATE EARTHING FOR TRANSFORMERS NEUTRALS
-
-
-
... More
Supply, Installation, testing and commissioning of the necessary materials for 600x600x3 mm thick CU plate earth station with salt and charcoal layer all round including excavation of earth, back filling, dressing and making manhole at ground level along with CI manhole cover, funnel and GI pipe for water complete in all respects as per IS : 3043. (DSR 5.6 (2018))
4
-
11912
... More
PIPE EARTHING FOR LIGHTNING ARRESTER LPDB,BUILDING EARTHING )
-
-
-
... More
Supply, Installation, testing and commissioning of GI pipe earth station with 40mm dia GI pipe of 3 mtr. long connected to 1 Mtr. long 20mm dia GI pipe with reducer and filled with alternative layers of salt and charcoal and providing manhole for watering with funnel, CI cover etc.complete in all respects as per IS-3043. (DSR 5.2 (2018))
16
-
5361
... More
ELECTRONIC EARTHING FOR INSTRUMENTATION SYSTEM
-
-
-
... More
Supplying the necessary materials for 600x600x6 mm thick GI plate earth station complete in all respects as per IS : 3043. (DSR 5.4 (2018))
4
-
5197
... More
Supply,fixing and terminating of following conductors with PVC sleeves and wires in trenches including providing sand cushioning, brick protection etc. or laying on surface with GI clamps, bolts and nuts etc.
-
-
-
... More
40 x 10 mm GI strip (A.R)
300
-
287
... More
32 x 6 mm Copper strip (DSR 6.13 (2016)
80
-
1078
... More
25 x 5 mm GI strip (DSR 5.9 (2018))
50
-
132
... More
25 x 5 mm braided copper tape (DSR 5.14 (2018)
75
-
1019
... More
25 x 6 mm GI strip (DSR 5.9 (2018)
50
-
132
... More
CABLE TRAYS
-
-
-
... More
Fabrication /Supply and Installation of Cable trays with accessories such as coupling plates, bends, tees, reducers, coupling nut-bolts etc. of following width. The cost of installation shall include connection, bolting, cutting, etc.The supporting steel for cable trays shall be painted type and Cable trays, accessories and covers shall be painted with one shop coat of red oxide zinc chromate primer and two site coats of aluminium alkyd paint.
-
-
-
... More
Ladder type trays– Prefabricated 2.5mm G.I.(Hot Dip Galvanised),75mm flange height
-
-
-
... More
600 mm width (A.R-90A)
200
-
678
... More
450 mm width (A.R-90B)
100
-
923
... More
Perforated type trays– Prefabricated 2.5mm G.I.(Hot Dip Galvanised),75mm flange height .
-
-
-
... More
300 mm width (DSR 4.1.4 (2018))
100
-
627
... More
150 mm width (DSR 4.1.2 (2018))
50
-
536
... More
100 mm width (DSR 4.1.1 (2018))
50
-
481
... More
Cable tray covers: Cable tray Covers shall be of GI sheet of 1.6 mm thick with clip fix clamps
-
-
-
... More
Cover for 150mm wide tray (A.R-91)
50
-
685
... More
Cover for 100mm wide tray (A.R-91)
50
-
588
... More
LIGHTNING PROTECTION SYSTEM
-
-
-
... More
Supplying, fixing & commissioning vertical air terminating fixtures with spikes mounted on 25mm dia GI pipe of atleast 2000mm length with base plate, bonding of earth strips etc. (DSR 6.2 (2018)
1
-
452
... More
Air Termination System
-
-
-
... More
Supply & laying of 20 x 3 mm GI Strip as ring conductor. (DSR 6.7 (2018)
250
-
105
... More
Down conductors
-
-
-
... More
Supply & laying of 20 x 3 mm GI Strip as ring conductor. (DSR 6.8 (2018)
50
-
165
... More
Testing Joints & earth termination system
-
-
-
... More
Providing test links with enclouser (DSR 6.12 (2018)
3
-
103
... More
Earth pits G.I. pipe earthing complete as per specifications. (Ordinary type) (DSR 5.2 (2018)
3
-
5361
... More
Iditification plate of earthing pit with associated work (A.R)
3
-
154
... More
MISCELLANEOUS ITEMS
-
-
-
... More
Earth work
-
-
-
... More
Earth work in excavation in all types of soils, sand and moorum, depth of excavation not exceeding 1.5 meter dressing of bottoms and sides, refilling ramming and disposal of surplus earth. (DSR-14.1 2018)
500
-
333
... More
Supplying, fixing, testing & commissioning heavy duty PVC pipe with all necessary conduit accessories etc. of the following sizes
-
-
-
... More
100mm dia conduit (A.R-94A)
20
-
367
... More
300mm dia conduit (A.R-94B)
20
-
3130
... More
Supply & Laying of double wall corrugated ( DWC) pipes of following dia hume pipe/HDPE Pipes for crossing the cables under the roads and paved areas & underground cable protection as per IS 14930 Part II. With necessary connecting socket/couplings, tees of some material at required depth up to 900 mm below road ground surface. backfilling of with light ramming is included in the scope.
-
-
-
... More
120mm dia dwc (A.R-57)
100
-
868
... More
Supply & Installation of following Items:-
-
-
-
... More
33 kV Danger Caution Boards (Danger Notice Plates) as per IS 2551 & IS 8923 (DSR 2.22 (2018))
2
-
246
... More
11 kV Danger Caution Boards (Danger Notice Plates) as per IS 2551 & IS 8923 (DSR 2.22 (2018))
2
-
246
... More
HV insulating mats confirming to IS 15652-2006. The mats should have been type tested by CPRI or another third party lab of equivalent stature. The mats shall be moisture proof, fire retardant and resistant to acids, alkalies & transformer oil. (A.R-95A)
2
-
6725
... More
First Aid box (A.R-95B)
1
-
422
... More
Shock treatment chart (A.R-95C)
1
-
552
... More
B.O.Q. (B) Building Part
-
-
-
... More
(Structural Part)
-
-
-
... More
EARTH WORK
-
-
-
... More
Earth work in rough excavation , banking excavated earth in layers not exceeding 20 cm in depth, breaking clods, watering rolling each layer with % tonne roller or wooden or steel rammers, and rolling every 3rd and top-most layer with power roller of minimum & tonnes and dressing up in embankments for roads, flood banks, marginal banks and guide banks or filling up ground depressions, lead up to 50 m and lift up to 1.5 m: All kinds of soil AR-YEA
1227.34
-
279.7
... More
Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundation etc. in layers not exceeding 20 cm in depth, consolidating each deposited layer by ramming and watering, lead up to 50 m and lift upto 1.5 m. AR-YEA
579.42
-
138.5
... More
Disposal of surplus excavated earth/mateiral within the plant area including spreading, levelling as directed at places indicated by Enginner incharge (Maximum lead 2.0 Km.) AR-YEA
647.92
-
79.2
... More
CONCRETE WORK:
-
-
-
... More
Providing and laying plain cement concrete mixed by volume in mechanical mixers with 40 mm and down aggregate as levelling course raft, foundation, floors , footings, and bed block etc. laid rough finished with wooden flats, including compacting, levelling , ramming , curing, shuttering etc. at all levels. complete as per drawing or as per direction of Engineer incharge 1:4:8 (1 cement : 4 coarse sand : 8 graded stone aggregate 40 mm nominal size ) DSR 2018 (Item 4.1.8) p-592
119.22
-
5789.6
... More
1:4:8 (1 Cement : 4 Cparse sand: 8Graded stpme aggregage 40mm nominal size) DSR 2018 (Item 4.1.8)
20
-
5789.6
... More
Providng and laying in position maching batched and machine mixed design mix M-25 grage cement concrete for reinforced cement concrete work. Using cement content as per approved desing mix, including pumping of concrete to site of layig but excluding the cost of centering, shuttering, finishing and reinforcement , including admixtures in recommended proportions as per IS: 9103 to accelerate, retard setting concrete, improve workability without imparing strength and durability as per direction of Engineer-in-charge.
-
-
-
... More
Note Cement content considered in this item is @ 330kg/cum Excess or less cement used as per design mix is payable or recoverable separately. A) All work upto plinth level DSR 2018 (Item 5.33.1) P-592
407.12
-
7997.3
... More
B) From ± 00 level to All heights (Item 5.2.3) DSR 2018 (Item 5.33.2) P-592
334.84
-
9400.85
... More
Providing and laying damp proof course 40 mm thick with cement concrete 1:2:4 (1 cement: 2 coarse sand : 4 graded stone aggregate 12.5 mm nominal size). DSR 2018 (Item 4.10)
45
-
347.9
... More
REINFORCEMENT STEEL WORK/ STEEL EBMEEMENTS
-
-
-
... More
Steel reinforcement for R.C.C. Work including straightening, cutting, bending, placing in position and binding all complete upto plinth level, Cold twisted bars DSR 2018 (Item 5.22.3)
46000
-
83.5
... More
Steel reinforcement for R.C.C. Work including straightening, cutting, bending, placing in position and binding all complete upto plinth level, Cold twisted bars DSR 2018 (Item 5.22A.3)
55000
-
83.5
... More
Placing and fixing in RCC work/Masonry PCC work sleeves, frames, inserts, ancher plates, anchor bolts of any description and any size at all level including carriage from employer store, positioning, levelling and supporting as per drawing and specification excluding cost of materials and fabrication and taking proper care at the time of concrete and expose the surface of insert plates after removal of shuttering and painted with approved quality red-oxide primer bolts and sleeyes to be cleaned greased and covered with water tight material after concerting or removal of shutteirng etc as predirection of the Engineer-in-chargeDSR 2018/10.20/179 P-592
3938.76
-
128.45
... More
FORM WORK
-
-
-
... More
Centering and shuttering including ,strutting, propping etc. and removal of form for a) foundations, footing, bases of columns, etc DSR 2018 (Item 5.9.1) P-592
790.2
-
284.85
... More
b) Suspended floors, roofs, landings , balconies and acess platform DSR 2018 (Item 5.9.3.) P-592
3686.19
-
693.05
... More
STEEL WORK
-
-
-
... More
Structural steel work riveted, bolted or welded in built up sections, trusses and framed work, including , cutting , hosting , fixing in position and applying a priming coat of approved steel primer all complete DSR 2018 (Item 10.2) P-592
9399.44
-
101.75
... More
(Architectural Part)
-
-
-
... More
BRICKWORK/ CONCRETE BLOCK MASONRY
-
-
-
... More
Brick work with common burnt clay modular bricks of class designation 7.5 in foundation and plinth in a) Cement mortar 1:6 (1 cement : 6 coarse sand ) DSR 2018 (Item 6.1.2) P-111
101
-
6157.45
... More
b) In superstructure ± 00 level to any height DSR 2018 (Item 6.4.2) P-111
298
-
7590.45
... More
c) Half brick masonry with common burnt clay F.P.S (non modular ) bricks of class designation 7.5 in superstructure above plinth level up to floor V level cement mortar 1:4 (1 cement : 4 coarse sand )DSR 2018 (Item 6.13.2) P-112
34
-
932.1
... More
FINISHING WORK (Plaster)
-
-
-
... More
12mm cement plaster of mix: a) 1:6 (1 cement : 3 fine sand )DSR 2018 (Item 13.1.2) P-222
1440
-
254.25
... More
6 mm cement plaster of mix: a) 1:3 (1 cement : 3 fine sand ) DSR 2018 (Item 13.16.1) P-223
670.4
-
227.35
... More
18 mm cement plaster in two coats under layer 12 mm thick cement plaster 1:5 (1 cement : 5 coarse sand ) finished with a top layer 6 mm thick cement plaster 1:6 (1 cement : 6 fine sand ) DSR 2018 (Item 13.11) P-223
456
-
399.3
... More
WALL FINISHES
-
-
-
... More
White wasing with lime to give an even shade: New work (three or more coats ) DSR 2018 (Item 13.37.1) P-225
128.8
-
28.55
... More
Wall painting with acrylic emulsion paint of approved brand and manufacture to give and even shade : Two or more coats on new work DSR 2018 (Item 13.60.1) P-227
808.8
-
128.65
... More
Finishing walls with water proofing cement paint of required shade : New work (Two or more coats applied @ 3.84 kg/10sqm) DSR 2018 (Item 13.44.1) P-225
147.2
-
91.25
... More
Painting with acid proof paint of approved brand and manufacture of required colour to give an even shade : Two or more coats on new work DSR 2018 (Item 13.64.1) P-227
491.2
-
130.05
... More
WALL DADO
-
-
-
... More
Providing and fixing 1st quality ceramic glazed wall tiles conforming to IS 15622 (thickness to be specified by the manufacture), of approved make, in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer-in-charge , in skirting, risers of steps and dados, over 12 mm thick bed of cement mortar 1:3 ( 1 cement : 3 coarse sand ) and jointing with grey cement slurry @ 3.3 kg per sqm, including pointing in white cement mixed with pigment of matcing shade complete DSR 2018 (Item 11.36) P-191
158.4
-
1030
... More
WALL SKIRTING
-
-
-
... More
Cement plaster skirting upto 30 cm height, with cement mortar 1:3 (1 cement : 3 coarse sand), finished with a floating coat of neat cement . 18mm thick DSR 2018 (Item 11.6.1) P-186
123.7
-
521.15
... More
Providing and laying Virified tiles in different sizes (thickness to be specified by the manufacturer ), with water absorptin less than 0.08% and conforming to IS: 15622, of approved brand & manufacturer, in all colours and shade, in skirting , riser of steps, laid with cement based high polymer modified quick set tile adhesive (wate based ) conforming to IS: 15477 , in average 6 mm thickness, including grouting of joints (Payment for grouting of joints to be made separately) Size of Tile 500x500mm DSR 2018 (Item 11.47.1) P-192
189.9
-
1501.25
... More
Providing edge moulding to 18 mm thick marble stone counters, vanities etc., including chinepolishing to edge to give high gloss finish etc. complete as per design approved by Engineer-in-charge Grainte work DSR 2018 (Item 8.3.2) P-128
19.2
-
376.25
... More
Kota stone slabs 20 mm thick in risers of steps, skirting, dado and pillars laid on 12 mm (average) thick cement mortar 1:3 (1 cement : 3 coarse sand ) and jointed with grey cement slurry mixed with pigment to match the shade of the slabs, including rubbbing and polishing complete DSR 2018 (Item 11.27) P-190
32
-
1810.05
... More
FLOOR FINISH
-
-
-
... More
Providing and laying vitrified floor tiles in different sizes (thickness to be specified by the manufacturer ) with water absorption less than 0.08% and conforming to IS : 15622, of approved make , in all colours and shades, laid on 20 mm thick cement mortar 1:4 ( 1cement : 4 coarse sand ), including grouting the joints with white cement and matching pigments etc., complete. Size of Tile 1000x1000 mmDSR 2018 (Item 11.41.4) P-191
180
-
2499.25
... More
Supplying and laying approved quality and non-skid type vitrified tiles over 20mm thick bed of cement mortar 1:4 (1 cement : 4 coarse sand ) jointed with neat cement slurry mixed with pigment to match the sade of files including rubbing and polishing with all materials labour, tools, etc. complete as per schedule and specification and as directed by the PM. DSR 2018/11.37 P-191
49.5
-
926.9
... More
Providing and fixing 10 mm thick and acid and / or alkali resistant tiles of approved make and colour using acid and / or alkali resisting mortar bedding , and joints filled with acid and / or alkali resisting cement as per IS: 4457, complete as per the direction of Engineer-in-charge . Acid and alkali resistant tile DSR 2018 (Item 11.21.1.1.) P-189
413.1
-
1495
... More
Kota stone slabs 20 mm thick in risers of steps, skirting, dado and pillars laid on 12 mm (average) thick cement mortar 1:3 ( 1 cement : 3 coarse sand ) and jointed with grey cement slurry mixed with pigment to match the shade of the slabs, including rubbing and polishing complete DSR 2018 (Item 11.27) P-190
67.5
-
1810.05
... More
CEILING FINISH
-
-
-
... More
Wall painting with acrylic emulsion paint of approved brand and manufacture to give an even shade: Two or more coats on new work DSR 2018 (Item 13.60.1) P-227
156.8
-
128.65
... More
Distempering with oil bound washable distemper of approved brand and manufacture to give an even shade : New work (Two or more coats ) over and including priming coat with water thinnable cement primer DSR 2018 ( Item 13.41.1) P-225
309.6
-
153.45
... More
EXTERNAL FINISH
-
-
-
... More
Finishing walls with Acrylic Smooth exterior paint of required shade : Now work (Two or more coat applied @ 1.67 ltr/10sqm over and including priming coat of exterior primer applied @ 2.20kg /10 sqm) DSR 2018 (Item 13.46.1)
456
-
164.7
... More
PLINTH PROTECTION
-
-
-
... More
Making plinth protection 50 mm thick of cement concrete 1:3:6 ( 1 Cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size ) over 75 mm thick bed of dry brick ballast 40 mm nominal size, well rammed and consolidated and grouted with fine sand , including finishing the top smooth . DSR 2018 (Item 4.17 ) P-88
72
-
614.05
... More
TERRACING
-
-
-
... More
Providing and fixing Heat Resistant Terrace Tiles ( 300 mm x 300 mm) with SRI (Solar refractive index) 78, solar reflection 0.70 and initial emittance 0.75 on waterproof and sloped surface of terrace, laid on 20 mm thick cement sand mortar in the ration of 1:4 (1 cement : 4 coarse sand ) and grouting the joints with mix of white cement & marble powder in ration of 1:1 , including rubbing and polishing of the surface upto 3 cuts complete, including providing skirting upto 150 mm height along the parapet walls in the same manner. DSR 2018 (Item 12.55 ) P-214
383.25
-
1374.1
... More
Providing gola 75x75 mm in cement concrete 1:2:4 ( 1 cement : 2 coarse sand : 4 aggregate 10 mm and down gauge ) including finishing with cement mortar 1: 3 ( 1 cement : 3 fine sand ) as per standard design: In 75x75 mm deep chase DSR 2018 (Item 12.21.1) P-206
76.5
-
237.25
... More
DOOR SHUTTERS
-
-
-
... More
Providing and fixing ISI marked flush door shutters conforming to IS: 2202 (Part I) decorateive type, core of block board construction with frame 1st class hard wood and well matched teak 3 ply veneering with vertical grains or cross bands and face veneers on both faces of shutters, 35 mm thick including ISI marked Stainless steel butt hinges with necessary screws DSR 2018 9.20.1 (Item 9.20.1) P-150
55.8
-
3023.95
... More
DOOR FRAMES
-
-
-
... More
Providing and fixing pressed steel door frames conforming to IS: 4351, manufactured from commerical mild steel sheet of 1.60 mm thickness, including hinges, jamb, lock jamb, bead and if required angle threshold of mild steel angle of section 50x25 mm, or base ties of 1.60 mm pressed, mild steel welded or rigidly fied together by mechanical means , including M.S. pressed butt hinges 2.5 mm thick with mortar guards, lock strike-plate and shock absorbers as specified and applying a coat of approved steel primer after pre-treatment of the surface as directed by Engineer-in-charge: Fixing with adjustable lugs with split end tail to each jamb DSR 2018 (Item 10.14.2.1) P-179
212
-
444.35
... More
Supply and fixing rollinig shutters of approved make, made of required size M.S laths, interlocked together through their entiere length and jointed together at the end by end locks, mounted on specially designed pipe shaft with brackets, side guides and arrangements for inside and outside locing with push and-pull operation complete, including the cost of providing and fixing necessary 27.5 cm long wire manufactured from high tensile steel wire of adequate strength conforming to IS: 4454 - part-1 and MS. Springs top over of required thickness for rolling shutters. 80x1.25 mm M.S laths with 1.25 mm thick top cover DSR 2018 (Item 10.6.1) P-177
10
-
2944.1
... More
ALLUMINIUM WINDOWS DOORS
-
-
-
... More
Providing and fixing anodised and / or powder coated aluminium work for doors, windows Ventilatos and partitions with extruded built up standard tubular and other sections of approved make conforming to IS733 and IS 1285 anodised transparent or dyed to required shade according to IS: 1868 (Minimum anodic coating of grade AC 15 ), fixed with Rawl plugs or with fixing clips, or with expansion hold fasteners including necessary fillings upto glass junctions, at top, bottom and sides with required P V C /neoprine felt etc. Aluminium sections shall be smooth, rust free, strainght, mitred and jointed mechanically where ever required including cleat angle, stainless steel screws, Aluminum snap beading for glazing / panelling. C.P Brass/ stainless steel screws, hingers, Handles, Locks & tower bolt and all complete as per Architecural drawings and direction of Engineer-in-charge (Glazing and panelling to be paid for seprately ) DSR 2018/ 21.10 , P-373
194
-
3905.35
... More
SANITARY FIXTURES
-
-
-
... More
Providing and fixing water close squatting pan (Indian type W.C. pan) with 100 mm Sand Cast Iron P or S trap, 10 litre low level white P.V.C flushing cistern, including flush pipe, manually controlled device (handle lever) conforming to IS: 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required :White Vitreous china Orissa pattern W.C. pan of size 580x440 mm with integral type foot rests DSR 2018 (Item 17.1.1) P-287
2
-
5421.5
... More
Providing and fixing white vitreous china pedestal type water closet (European type) with seat arid lid 10 ltr. Low level white vitreous china flushing cistern & C.P. flush bend with fitting & C.I. brakets, 40m flush bend , overflow arrangement with specials of standard make and mosquito proof of approval municipal design complete including painding of fittings and brackets cutting and making good the walls and floors wherever required: W.C. pan with ISI marked white solid plastic seat and lid DSR 2018 (Item 17.3.1) P-287
6
-
6685
... More
Providing and fixing wash basin with C.I brackets, 15 mm C.P. brass pillar taps, 32 mm C.P brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever require: White Vitreous China Wash basin size 630x450 mm with a single 15 mm C.P brass pillar tap DSR 2018 (Item 17.7.2) P-288
8
-
2751.3
... More
Providing and fixing toilet paper holder: C.P. brass DSR 2018 (Item 17.34.1) P-291
8
-
538.75
... More
Providing and fixing white vitreous china flat back or wall corner type lipped front urinal basin of 430x260x350 mm and 340x410x265 mm sizes respectively with automatic flushing cistern with standard flush pipe and C.P brass spreaders with brass unions and G.I clamps complete, including painting of itting and bcakets, cutting and making good the walls and floors wherever required : DSR 2018 (Item 17.4.1) P-287
4
-
4982.25
... More
Providing and fixing C.P. brass long nose bid cock of approved quality conforming to IS standards and weighing not less than 810 gms 15 mm nominal bore DSR 2018 (Item 18.50.1) P-329
2
-
618.8
... More
Providing and fixing C.P brass angle valve for basin mixer and geyser points of approved quality conforming to IS:8931 DSR 2018 (Item 18.53.1) P-328
14
-
532
... More
Providing and placing on terrace ( at all floor levels) polyethylene water storage tank ISI : 12701 marked , with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank DSR 2018 (Item 18.48 ) P-327
3000
-
8.8
... More
Providing and fixing soil , waste and vent pipes :Centrifugally cast (Spun) iron socket & spigot (S&S) pipe as per IS: 3989 a) 100 mm dia DSR 2018 (Item 17.35.1.2) P-291
62
-
1092.2
... More
b) 75 mm dia DSR 2018 (Item 17.35.2.2) P-291
78.75
-
992.05
... More
Providing lead caulked joints to sand cast iron/centrifugally cast (spun) iron pipes and fitting of diameter. a) 100 mm dia DSR 2018 (Item 17.58.1.) P-296
40
-
481.45
... More
b) 75 mm DSR 2018 (Item 17.58.2) P-296
50
-
407.9
... More
Providing and fixing single equal plain junction of required degree with access door, insertion rubber washer 3 mm thick, bolts and nuts complete: . a) 100 x100x 100mm Sand cast iron S&S as per IS-3989 DSR 2018 (Item 17.43.1.2) P-293
8
-
722.55
... More
b) 75 X75X75 mm Sand cast iron S&S as per IS- 3989 DSR 2018 (Item 17.43.2.2) P-293
12
-
549.35
... More
Providing and fixing terminal guard: sand cast iron S&S as per IS-3989 a) 100 mm DSR 2018 (Item 17.56.1.2)
5
-
389.4
... More
b) 75 mm DSR 2018 (Item 17.56.2.2)
5
-
309.85
... More
Providing and fixing trap of self cleansing design with screwed or hinged grating with or without vent arm complete, including cost of cutting and making good the walls and floors: 100mm inlet and 75 mm outlet Sand cast Iron S&S as per IS-3989 DSR 2018 (Item 17.60.2.1) P-296
14
-
1579.45
... More
Providing and fixing M.S holder -bat clamps of approved design to Sand Cast Iron/ Cast Iron (Spun) pipe embedded in and including cement concrete blocks 10x10x10 cm of 1:2:4 mix ( 1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size ), including cost of cutting holes and making good the walls etc. a) for 100 mm dia pipe DSR 2018(Item 17.37.1) P-292
40
-
287.45
... More
b) For 75 mm dia pipe DSR DSR 20182016 (Item 17.37.2) P-292
50
-
283.4
... More
Slab with 1:2:4 mix (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size), foundation concrete 1:4:8 mix (1 cement : 4 coarse sand : 8 graded stone aggregate 40 mm nominal size), inside plastering 12 mm thick with cement mortar 1:3 (1 cement : 3 coarse sand ) finished with floating coat of neat cement and making channels in cement concrete 1:2:4 ( 1 cement : 2 coarse sand: 4 graded stone aggregate 20 mm nominal size ) finished with a floating coat of neat cement complete as per standard design: Inside size 90x80 cm and 45 cm deep including C.I cover with frame (light duty) 455x610 mm internal dimensions, total weight of cover and frame to be not less than 38 kg (weight of cover 23 kg and weight of frame 15 kg): With common burnt clay F.P.S( non modular ) bricks of class designation 7.5 DSR 2018 (Item 19.7.1) P-351
5
-
10905.05
... More
Providing and fixing Chlorinated polyvinyl Chloride (CPVC) pipes , having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings including fixing the pipe with clamps at 1.00 m spacing . This includes jointing of pipes & fitting with one step CPVC solvent cement and testing of joints complete as per direction of Engineer-in-charge . Internal work-Exposed on wall of joints complete as per direction of Engineer -in-charge internal work- Exposed on wall. a) 15mm nominal outer dia pipes DSR 2018 (Item 18.7.1) P-319
72
-
241.55
... More
b) 20mm nominal outer dia pipes DSR 2018 (Item 18.7.2) P-319
72
-
306.95
... More
c) 25 mm nominal outer dia pipes DSR 2018 (Item 18.7.3) P-319
90
-
369.2
... More
Providing and laying non-pressure NP2 class (light duty) R.C.C pipes with collars jointed with shift mixture of cement mortar in the proportion of 1:2 (1 cement : 2 fine sand ) including testing of joints etc, complete 150 mm dia R.C.C pipe DSR 2018 (Item 19.6.2) P-350
45
-
462.6
... More
Providing and laying cement concrete 1:5:10 ( 1 cement : 5 coarse sand : 10 graded stone aggregate 40 mm nominal size) all -round S.W. pipes including bed concrete as per standard design: 150 mm diameter S.W Pipe DSR 2018 (Item 19.2.2) P-349
8.15
-
999.15
... More
Providing and fixing C.P. brass bib cock of approved quality conforming to IS:8931 15 mm nominal bore DSR 2018 (Item 18.49.1) P-327
8
-
418.95
... More
Providing and fixing PTMT liquid soap container 109 mm wide, 125 mm high and 112 mm distance from wall of standard shape with bracket of the same materials with snap fittings of approved quality and colour weighing not less than 105 gms .DSR 2018 (Item 17.71) P-297
6
-
158.55
... More
Providing and fixing stainless Stee A ISI 304 ( 18/8) kitchen sink as per IS 13983 with C.I brackets and stainless steel plug 40 mm. including painting of fittings and brackets, cutting and making good the walls wherever required: 510x1040 mm bowl depth 178 mm DSR 2018 (Item 17.10.1.4) P-289
2
-
5182.7
... More
Providing and fixing PTMT towel rail complete with brackets fixed to wooden cleats with CP brass screws with concealed fitting arrangement of approved quality and colour. 600 mm long towel rail with total length of 645 mm , width 78 mm and effective hight of 88 mm weighing not less than 190 gms DSR 2018 (Item 17.73.2) P-297
6
-
595.5
... More
Providing and fixing 600x450 mm beveled edge mirror of superior glass ( of approved quality) complete with 6 mm thick hard board ground fixed to wooden cleats with C.P brass screws and washers complete DSR 2018 (Item 17.31) P-294
8
-
1283.05
... More
MISCELLANEOUS BUILDING WORKS
-
-
-
... More
Granite of any colour and shade Area of slab over 0.50 sqm DSR 2018 (Item 8.2.2.2) P-128
6.1
-
4007.05
... More
Providing and fixing G.I chain link fabric fencing of required width in mesh size 50x50 mm including strengthening with 2 mm dia wire or nuts, bolts and washers as required complete as per the direction of Engineer-in-charge . Made of G.I wire of dia 4 mm DSR 2018 (Item 16.70.1) P-274
67.64
-
797.2
... More
Steel work welded in built up sections/ framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required. In gratings , frames, guard bar, ladder, railings, brackets, gates and similar works DSR 2018 (Item 10.25.2) P-180
125
-
131
... More
WATER PROOFING WORK ON TERRACE
-
-
-
... More
Providing and laying integral cement based water proofing treatment including preparation of surface as required for treatment of roofs, balconies, terraces etc consisting of following operations: a) Applying a slurry coat of neat cement using 2.75 kg/ sqm of cement admixed with water proofing compound conforming to IS. 2645 and approved by Engineer-in-charge over the RCC slab including adjoining walls upto 300 mm height including cleaning the surface before treatment .
-
-
-
... More
b) Laying brick bats with mortar using broken bricks /brick bats 25 mm to 115 mm size with 50% of cement mortar 1:5 (1 cement : 5 coarse sand) admixed with water proofing compound conforming to IS: 2645 and approved aby Engineer-in -charge over 20 mm thick layer of cement mortar of mix 1:5 (1 cement : 5 coarse sand) admixed with water proofing compound conforming to IS: 2645 and approved by Engineer-in-charge to required slope and treating similarly the adjoining walls upto 300 mm height incluidng rounding of junctions of walls and slabs . C) After two days of proper curing applying a second coat of cement slurry using 2.75 kg/sqm of cement admixed with water proofing compound conforming to IS: 2645 and approved by Engineer-in-charge .
-
-
-
... More
d) Finishsing the surface with 20 mm thick jointless cement mortar of mix 1:4 (1 cement : 4 coarse sand ) admixed with water proofing compound conforming tc IS : 2545 and approved by Engineer-in-charge laying glass fibre cloth of approved quality in top layer of plaster and finally finishing the surface with trowel with near cement slurry and making pattern of 300x300 mm square 3 mm deep. e) The whole terrace so finished shall be flooded with water for minimum period of two weeks for curing and for final test . All above operations to be done and as directed and specified by the Engineer-in-charge : WIith average thickness of 120 mm and minimum thickness of khurra as 65 mm DSR 2016 /22.7.1 P-381
365.75
-
1398.5
... More
Providing and laying water proofing treatemnt ot vertical and horizontal surfaces of depressed portions of W.C. Kitchen and the like consisint of DSR 2018 (Item 22.3) P-379
-
-
-
... More
i) Ist course of applying cement slury @ 4.4 kg/ sqm mixed with water proofing compoun dconformng to IS: 2645 in recommended proportions including rounding off junction of vertical and horizontal surface
-
-
-
... More
ii) Iind course of 20 mm cement plaster 1:3 ( 1 cement : 3 coarse sand ) mixed with water proofing compound in recommended proportion including rounding off junction of vertical and horizontal
-
-
-
... More
iii) IIIrd course of applying blown or residual bitumen applied hot at 1.7 kg per sqm of area.
-
-
-
... More
iv) Ivth course of 400 micron thick PVC sheet . (Overlaps at joints of PVC sheet should be 100 mm wide and pasted to each other with bitumen @1.7 kg/sqm)
24
-
705.7
... More
SUNKEN AREA FILLING
-
-
-
... More
Provided and filling on Sunken areas with broken light weight concrete block bats of approximately six hundred kg per Cum dencity laid, consolidated, finished smooth with 50 mm to 60 mm thick PCC and including finishing and grouting the tope layer with water proof cement mortar of required thickness (mkt)
10.8
-
275
... More
ANTI TERMITE TREATMENT
-
-
-
... More
Diluting and injecting chemical emulsion for POST-CONSTRUCTIONAL anti-termite treatment (excluding the cost of chemical emulsion) : Along external wall where the apron is not provided using chemical emulsion @ 7.5 litres/sqm of the vertical surface of the substructure to a depth of 300 mm including excavation channel along the wall & rodding etc. complete : With Chlorpyriphos/ Lindane E.G. 20% with 1% concentration DSR 2018 (Item 2.35.1.1)
574
-
28.25
Evaluation Notes How It Works ?
Potential Partner
Select Your Requirements