Uttar Pradesh Projects Corporation Limited Tender
If you're a registered bidder for etender UP and want to inquire about any e-tender UP government has posted, this is your stop. No need to enter every detail on the website of <a href="https://etender.up.nic.in">etender.up.nic.in</a> - BidAssist filters will help you find the exact UP etender you're looking for. Read to learn how to search & bid for etender UP.
Uttar Pradesh Projects Corporation Limited - UPPCL Tender
Civil And Construction
Building Construction
Eprocure
Opening Date22 May 2024
Closing Date29 May 2024
Tender Amount₹ 14,33,09,000
Costs
EMD
₹ 28,66,000Document Cost
₹ 17,700Tender Fee
Refer Documents
Description
Scription for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user
Contact
Tender Id
2024_UPPRC_925284_1Bid Award Id
ViewTender No
136/UPPCL/GM-1/2023-24/ETENDER Dated-11.03.2024Tender Authority
Uttar Pradesh Projects Corporation Limited ViewPurchaser Address
-Website
http://http://upprojects.org/
GEM & Bid Advisory Services
Get portal registration, tender bidding, product/service listing or vendor/MSME certification services at a nominal cost
BOQ Items
Excavating, supplying and filling of local earth (including royalty) by mechanical transport upto a lead of 5km also including ramming and watering of the earth in layers not exceeding 20 cm in trenches, plinth, sides of foundation etc. complete.
104.32
51026
489.13
Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level : 1:4:8 (1 Cement : 4 coarse sand : 8 graded stone aggregate 40 mm nominal size)
172.47
820350
4756.48
Supplying and filling in plinth with sand under floors, including watering, ramming, consolidating and dressing complete.
150.04
222495
1482.91
Treatment of soil under existing floors using chemical emulsion @ one litre per hole, 300 mm apart including drilling 12 mm diameter holes and plugging with cement mortar 1:2 (1 cement:2 coarse sand) to match the existing floor. With Chlorpyriphos/ Linadane E.C. 20% with 1% concentration.
908.47
196683
216.5
Providing and laying in position ready mixed or site batched design mix cement concrete for reinforced cement concrete work; using coarse aggregate and fine aggregate derived from natural sources, Portland Pozzolana / Ordinary Portland /Portland Slag cement, admixtures in recommended proportions as per IS: 9103 to accelerate / retard setting of concrete, to improve durability and workability without impairing strength; including pumping of concrete to site of laying, curing, carriage for all leads; but excluding the cost of centering, shuttering, finishing and reinforcement as per direction of the engineer-in-charge; for the following grades of concrete.Note: Extra cement up to 10% of the minimum specified cement content in design mix shall be payable separately. In case the cement content in design mix is more than 110% of the specified minimum cement content, the contractor shall have discretion to either re-design the mix or bear the cost of extra cement.Concrete of M25 grade with minimum cement content of 330 kg /cum
-
-
-
(a) Ground Floor
6
41310
6885.02
(b) First Floor
10.01
68919
6885.02
(c) Second Floor
5.37
36972
6885.02
(d) Third Floor
4.53
31189
6885.02
(e) Terrace Floor
0.36
2478
6885.02
As in item above but for slabs (Using M-25 Mix concrete).
-
-
-
(a) Ground Floor
130.45
898150
6885.02
(b) First Floor
128
881282
6885.02
(c) Second Floor
127.95
880938
6885.02
(d) Third Floor
111.18
765476
6885.02
(e) Terrace Floor
8.5
58522
6885.02
As in item above but for the lighter beams i.e. having spans upto 6 m.
-
-
-
(a) Ground Floor
119.92
825651
6885.02
(b) First Floor
50.63
348588
6885.02
(c) Second Floor
50.63
348588
6885.02
(d) Third Floor
76.62
527530
6885.02
(e) Terrace Floor
4.04
27815
6885.02
As in item above but in R.C.C. Raft foundation and footing with approved stone ballast.
695.22
4613959
6636.69
Boring with hydraulic piling rigs with power units, Providing and installing cast in situ single under reamed piles of specified diameter and length below pile cap in M-25 cement concrete, to carry a safe working load not less than specified, excluding the cost of steel reinforcement but including the cost of boring with bentonite solution and the length of the pile to be embedded in pile cap etc. all complete. (Length of pile for payment shall be measured upto to the bottom of pile cap) :400 mm dia piles 400 mm dia piles
4570
12117217
2651.47
As in item above but for the Column.
-
-
-
(a) Ground Floor
43.06
296468
6885.02
(b) First Floor
35.06
241388
6885.02
(c) Second Floor
35.06
241388
6885.02
(d) Third Floor
32.75
225484
6885.02
(e) Terrace Floor
3.63
24992
6885.02
Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in foundation and plinth in:Cement mortar 1:6 (1 cement : 6 coarse sand)
19.57
97469
4980.58
Painting on D.P.C. with two coats of airblown bitumen 85/50 or 85/25 @ 1.7 kg/sqm approx. including cost of fuel if any.
104.22
10635
102.05
Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in superstructure above plinth level up to floor V level in all shapes and sizes in :Cement mortar 1:6 (1 cement : 6 coarse sand)
-
-
-
(a) Ground Floor
211.15
1342540
6358.23
(b) First Floor
185.64
1180341
6358.23
(c) Second Floor
186.01
1182694
6358.23
(d) Third Floor
183.17
1164636
6358.23
(e) Terrace Floor
77.97
495751
6358.23
Half brick masonry with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in superstructure above plinth level up to floor V level.Cement mortar 1:4 (1 cement :4 coarse sand)
-
-
-
(a) Ground Floor
318.8
250159
784.69
(b) First Floor
434.03
340579
784.69
(c) Second Floor
412.76
323888
784.69
(d) Third Floor
428.84
336506
784.69
(e) Terrace Floor
4.16
3264
784.69
Mild steel or iron in plain work such as reinforced concrete or reinforced, brick work (when not included in anover all rates ) wrought to required shape as necessary including bending for proper completion of the work and including supply of steel its wastage bend hooks and authorised over lapping shall be measured upto floor two level.
-
-
-
(a) Ground Floor
1422.25
10710438
7530.63
(b) First Floor
279.22
2102702
7530.63
(c) Second Floor
274.64
2068212
7530.63
(d) Third Floor
295.56
2225753
7530.63
(e) Terrace Floor
22.64
170493
7530.63
15 mm cement plaster on rough side of single or half brick wall of mix : 1:4 (1 cement: 4 coarse sand).
141.12
40573
287.51
15 mm cement plaster on rough side of single or half brick wall of mix:1:6 (1 cement: 6 coarse sand)
-
-
-
(a) Ground Floor
1923.87
531084
276.05
(b) First Floor
1866.56
515263
276.05
(c) Second Floor
1868.18
515711
276.05
(d) Third Floor
1741.83
480832
276.05
(e) Terrace Floor
104.76
28919
276.05
12 mm cement plaster of mix :1:6 (1 cement: 6 coarse sand)
-
-
-
(a) Ground Floor
798.55
191612
239.95
(b) First Floor
809.67
194280
239.95
(c) Second Floor
764.69
183487
239.95
(d) Third Floor
957.76
229814
239.95
(e) Terrace Floor
679.01
162928
239.95
Add for plaster drip course/ groove in plastered surface or moulding to R.C.C. projections.
2968.31
162485
54.74
Kota stone slab flooring over 20 mm (average) thick base laid over and jointed with grey cement slurry mixed with pigment to match the shade of the slab, including rubbing and polishing complete with base of cement mortar 1 : 4 (1 cement : 4 coarse sand) :25 mm thick
-
-
-
(a) Ground Floor
549.48
747490
1360.36
(b) First Floor
279.78
380601
1360.36
(c) Second Floor
279.78
380601
1360.36
(d) Third Floor
279.78
380601
1360.36
(e) Terrace Floor
20.14
27397
1360.36
Kota stone slabs 20 mm thick in risers of steps, skirting, dado and pillars laid on 12 mm (average) thick cement mortar 1:3 (1 cement: 3 coarse sand) and jointed with grey cement slurry mixed with pigment to match the shade of the slabs, including rubbing and polishing complete.
-
-
-
(a) Ground Floor
30.95
50887
1644.17
(b) First Floor
30.01
49341
1644.17
(c) Second Floor
30.01
49341
1644.17
(d) Third Floor
30.01
49341
1644.17
(e) Terrace Floor
3.19
5244
1644.17
Providing and laying Ceramic glazed floor tiles of size 300x300 mm (thickness to be specified by the manufacturer) of 1st quality conforming to IS : 15622 of approved make in colours such as White, Ivory, Grey, Fume Red Brown, laid on 20 mm thick cement mortar 1:4 (1 Cement : 4 Coarse sand), Jointing with grey cement slurry @ 3.3 kg/sqm including pointing the joints with white cement and matching pigment etc., complete.
-
-
-
(a) Ground Floor
375.04
287153
765.66
(b) First Floor
281.32
215395
765.66
(c) Second Floor
281.32
215395
765.66
(d) Third Floor
281.32
215395
765.66
Providing and laying vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS: 15622, of approved make, in all colours and shades, laid on 20mm thick cement mortar 1:4 (1 cement : 4 coarse sand), jointing with grey cement slurry @ 3.3 kg/ sqm including grouting the joints with white cement and matching pigments etc., complete.Size of Tile 600x600 mm
-
-
-
(a) Ground Floor
450.49
488646
1084.7
(b) First Floor
463.98
503279
1084.7
(c) Second Floor
463.98
503279
1084.7
(d) Third Floor
319.36
346409
1084.7
Providing and laying Vitrified tiles in different sizes (thickness to be specified by manufacturer), with water absorption less than 0.08 % and conforming to I.S. 15622, of approved make, in all colours & shade, in skirting, riser of steps, over 12 mm thick bed of cement mortar 1:3 (1 cement: 3 coarse sand), jointing with grey cement slurry @ 3.3 kg/ sqm including grouting the joint with white cement & matching pigments etc. complete.Size of Tile 600x600 mm
-
-
-
(a) Ground Floor
65.94
74729
1133.29
(b) First Floor
65.79
74559
1133.29
(c) Second Floor
65.79
74559
1133.29
(d) Third Floor
58.49
66286
1133.29
Providing and fixing 18mm thick gang saw cut mirror polished premoulded and prepolished) machine cut for kitchen platforms, vanity counters, window sills , facias and similar locations of required size of approved shade, colour and texture laid over 20mm thick base cement mortar 1:4 (1 cement : 4 coarse sand) with joints treated with white cement, mixed with matching pigment, epoxy touch ups, including rubbing, curing, moulding and polishing to edges to give high gloss finish etc. complete at all levels. Granite of any colour and shade.
-
-
-
(a) Ground Floor
22.07
79152
3586.42
(b) First Floor
3.32
11906
3586.42
(c) Second Floor
3.32
11906
3586.42
(d) Third Floor
3.32
11906
3586.42
Making plinth protection 50mm thick of cement concrete 1:3:6 (1 cement : 3 coarse sand (zone-III) derived from natural sources : 6 graded stone aggregate 20 mm nominal size derived from natural sources) over 75mm thick bed of dry brick ballast 40 mm nominal size, well rammed and consolidated and grouted with fine sand, including necessary excavation, levelling & dressing & finishing the top smooth
131.4
68748
523.2
Providing and fixing ISI marked flush door shutters conforming to IS : 2202 (Part I) non-decorative type, core of block board construction with frame of 1st class hard wood and well matched commercial 3 ply veneering with vertical grains or cross bands and face veneers on both faces of shutters: (Both side laminated)
-
-
-
(a) 35 mm thick including ISI marked Stainless Steel butt hinges with necessary screws. Single leaf.
307.76
719604
2338.2
(b) Double leaf
31.5
76000
2412.7
Providing and fixing mild steel round holding down bolts with nuts and washer plates complete.
1017.6
69064
67.87
Steel work welded in built up sections/ framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required.In gratings, frames, guard bar, ladder, railings, brackets, gates and similar works
7082.78
853616
120.52
Z-Section steel windows (openable)
9443.7
845683
89.55
Angle iron door chaukhats 40*40*5
2577.99
234906
91.12
Providing and fixing wire gauge shutters using stainless steel grade 304 wire gauge with wire of dia 0.5 mm and average width of aperture 1.4 mm in both directions for doors, windows and clerestory windows with necessary screws : 35 mm thick shutters with ISI marked M.S. pressed butt hinges bright finished of required size. Second class teak wood
472.19
1656494
3508.11
Distempering (Two coat) with oil bound distemper of approved brand and manufacture & of required shade on undecorated wall surface to give an even shade over & including a priming coat with cement primer of approved brand & manufacture such as Berger,J&N, Shalimar, Asian paints after thoroughly brushing the surface free from mortar droppings & other foreign matters & also including preparing the surface even with plaster of paris or approved synthetic material & sand papered smooth including cost ofall materials. (For Internal wall surface)
-
-
-
(a) Ground Floor
1923.87
249391
129.63
(b) First Floor
1866.56
241962
129.63
(c) Second Floor
1868.18
242172
129.63
(d) Third Floor
1741.83
225793
129.63
(e) Terrace Floor
104.76
13580
129.63
Finishing walls with Premium Acrylic Smooth exterior paint with Silicone additives of required shade:New work (Two or more coats applied @ 1.43 ltr/10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/10 sqm)(Outer surface)
-
-
-
(a) Ground Floor
798.55
95402
119.47
(b) First Floor
809.67
96731
119.47
(c) Second Floor
764.69
91357
119.47
(d) Third Floor
957.76
114423
119.47
(e) Terrace Floor
679.01
81121
119.47
Distempering (Two coat) with oil bound distemper of approved brand and manufacture & of required shade on undecorated wall surface to give an even shade over & including a priming coat with cement primer of approved brand & manufacture such as Berger,J&N, Shalimar, Asian paints after thoroughly brushing the surface free from mortar droppings & other foreign matters & also including preparing the surface even with plaster of paris or approved synthetic material & sand papered smooth including cost ofall materials. +
-
-
-
(a) Ground Floor
944.23
122400
129.63
(b) First Floor
936.61
121412
129.63
(c) Second Floor
936.2
121359
129.63
(d) Third Floor
803.03
104096
129.63
(e) Terrace Floor
57.51
7455
129.63
Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete.
-
-
-
(a) Ground Floor
3666.65
399554
108.97
(b) First Floor
3612.85
393692
108.97
(c) Second Floor
3569.07
388921
108.97
(d) Third Floor
3502.61
381679
108.97
(e) Terrace Floor
841.28
91674
108.97
Providing and fixing aluminium hanging floor door stopper, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour and shade, with necessary screws etc. complete. Twin rubber stopper
173
8739
50.52
Providing and fixing aluminium sliding door bolts, ISI marked anodised (anodic coating not less than grade AC 10 as per IS : 1868), transparent or dyed to required colour or shade, with nuts and screws etc. complete : (a) 250mm x 16mm.
173
31479
181.96
Providing and fixing aluminium tower bolts, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868 ) transparent or dyed to required colour or shade, with necessary screws etc. complete :
-
-
-
(a) 250 mm x 10mm
173
13910
80.41
(b) 200 mm x 10mm
173
12044
69.62
Providing and fixing aluminium handles, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade, with necessary screws etc. complete : 125mm (For Doors)
346
16005
46.26
Providing and laying integral cement based water proofing treatment including preparation of surface as required for treatment of roofs, balconies, terraces etc consisting of following operations: a) Applying a slurry coat of neat cement using 2.75 kg/sqm of cement admixed with water proofing compound conforming to IS. 2645 and approved by Engineer-in-charge over the RCC slab including adjoining walls upto 300 mm height including cleaning the surface before treatment. b) Laying brick bats with mortar using broken bricks/brick bats 25 mm to 115 mm size with 50% of cement mortar 1:5 (1 cement : 5 coarse sand) admixed with water proofing compound conforming to IS : 2645 and approved by Engineer-in-charge over 20 mm thick layer of cement mortar of mix 1:5 (1 cement :5 coarse sand ) admixed with water proofing compound conforming to
872.71
1026542
1176.27
Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade.Two or more coats on new work over an under coat of suitable shade with ordinary paint of approved brand and manufacture : (M.S. works).
674.87
106615
157.98
Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade.Two or more coats on new work over an under coat of suitable shade with ordinary paint of approved brand and manufacture : (Wood works).
675.63
106736
157.98
Providing & fixing glass panes with putty and glazing clips in steel doors, windows, clerestory windows, all complete with : 4.0 mm thick glass panes
472.19
351021
743.39
Providing & laying of light cinder filling under floor of toilets & other sunken roofs.
82.44
195795
2375
Providing and laying water proofing treatment in sunken portion of WCs, bathroom etc., by applying cement slurry mixed with water proofing cement compound consisting of applying : (a) First layer of slurry of cement @ 0.488 kg/sqm mixed with water proofing cement compound @ 0.253 kg/ sqm. This layer will be allowed to air cure for 4 hours. (b) Second layer of slurry of cement @ 0.242 kg/sqm mixed with water proofing cement compound @ 0.126 kg/sqm. This layer will be allowed to air cure for 4 hours followed with water curing for 48 hours. The rate includes preparation of surface, treatment and sealing of all joints, corners, junctions of pipes and masonry with polymer mixed slurry.
330.71
142486
430.85
Providing and fixing stainless steel ( Grade 304) railing made of Hollow tubes, channels, plates etc., including welding, grinding, buffing, polishing and making curvature (wherever required) and fitting the same with necessary stainless steel nuts and bolts complete, i/c fixing the railing with necessary accessories & stainless steel dash fasteners , stainless steel bolts etc., of required size, on the top of the floor or the side of waist slab with suitable arrangement as per approval of Engineer-in-charge.
627.3
338315
539.32
Chequerred precast cement concrete tiles 22 mm thick in footpath & courtyard, jointed with neat cement slurry mixed with pigment to match the shade of tiles, including rubbing and cleaning etc. complete, on 20 mm thick bed of cement mortar 1:4 (1 cement: 4 coarse sand). Ordinary cement without any pigment
9.17
6763
737.6
Providing and fixing ISI marked flush door shutters conforming to IS : 2202 (Part I) decorative type, core of block board construction with frame of 1st class hard wood and well matched teak 3 ply veneering with vertical grains or cross bands and face veneers on both faces of shutters.25 mm thick (for cupboard) including ISI marked nickel plated bright finished M.S. Piano hinges IS : 3818 marked with necessary screws
330.37
650346
1968.54
Foundations, footings, bases of columns, etc. for mass concrete
474.58
129949
273.82
Columns, Pillars, Piers, Abutments, Posts and Struts
1871.07
1255918
671.23
Lintels, beams, plinth beams, girders, bressumers and
cantilevers with water proof ply 12 mm thick
4535.01
2666087
587.89
Suspended floors, roofs, landings, balconies and access
platform with water proof ply 12 mm thick
4129.63
2965404
718.08
INTERNAL W/S AND SANITATION
-
-
-
SUB HEAD - I - (SANITARY FIXTURES & INTERNAL PLUMBING)
-
-
-
Providing and fixing water closet squatting pan (Indian type W.C. pan ) with 100 mm sand cast Iron P or S trap, 10 litre low level white P.V.C. flushing cistern, including flush pipe, with manually controlled device (handle lever) conforming to IS : 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required: White Vitreous china Orissa pattern W.C. pan of size
580x440 mm with integral type foot rests
9
42528
4725.34
Providing and fixing white vitreous china pedestal type water closet (European type) with seat and lid, 10 litre low level white vitreous china flushing cistern & C.P. flush bend with fittings & C.I. brackets, 40 mm flush bend, overflow arrangement with specials of standard make and mosquito proof coupling of approved municipal design complete, including painting of fittings and brackets, cutting and making good the walls and floors wherever required W.C. pan with ISI marked white solid plastic seat and lid
19
106221
5590.61
Handicap toilet :-
-
-
-
Providing and fixing of WB 46 x 36 with one pair mounting brackets, EWC & Cistern complete with fittings & seat cover, one no. hinged rail 76 cm & 4 nos. of grab rails 60 cm.
1
38919
38919.6
Providing and fixing wash basin with C.I. brackets, 15 mm C.P. Brass pillar taps, 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever require: White Vitreous China Wash basin size 630x450 mm with a pair of 15 mm C.P. brass pillar taps.
28
51787
1849.56
Providing and fixing Stainless Steel AISI 304(18/8) kitchen sink as per IS : 13983 with C.I. brackets and stainless steel plug 40mm including painting of fittings and brackets, cutting and making good the walls wherrerever required. Kitchen sink with drain board Size 510x1040 mm bowl depth 250mm
2
9699
4849.77
Providing and fixing P.V.C. waste pipe for sink or wash basin including P.V.C. waste fittings complete. Semi rigid pipe 40 mm dia
2
162
81.48
Providing & fixing C.P. hand spray with lever control (health faucet) and flexible hose 1 m long connection with C.P. holder for hand spray complete in all respects. (Angle valve to be provide under item no. 18 and measure with that item.)
19
22466
1182.47
Providing and fixing 600 x 450mm beveled edge mirror of superior glass (of approved quality) complete with 6 mm thick hard board ground fixed to wooden cleats with C.P. brass screws and washers complete in all respect.
28
31437
1122.75
Providing and fixing uplasticised PVC connection pipe with brass unions : 30 cm length 15 mm nominal bore
163
9675
59.36
Providing and fixing brass stop cock of approved quality : 15 mm nominal bore
56
13812
246.66
PProviding and fixing PTMT liquid soap container 109 mm wide, 125 mm high and 112 mm distance from wall of standard shape with bracket of the same materials with snap fittings of approved quality and colour, weighing not less than 105 gms.
52
6112
117.55
Providing and fixing toilet paper holder. C.P. brass
19
10662
561.18
Providing and fixing C.P. brass long body bib cock of approved quality conforming to IS standards and weighing not less than 690 gms. 15 mm nominal bore
30
16736
557.87
Providing and fixing CP Brass Single lever telephonic wall mixer of quality & make as approved by Engineer in charge. (For bath) . 15 mm nominal bore
24
116313
4846.38
Providing and fixing C.P. brass shower rose with 15 or 20mm inlet 150 mm diameter
24
3726
155.26
Providing and fixing C.P. brass stop cock (concealed) of standard design and of approved make conforming to IS: 8931. 15 mm nominal bore
24
11235
468.14
Providing and fixing C.P. brass angle valve for basin mixer and geyser points of approved quality conforming to IS 8931 (including angle valve for WC flushing cistern, jet & kitchen sink) 15 mm nominal bore
80
32080
401
Providing and fixing brass bib cock of approved quality 15 mm nominal bore
52
12826
246.66
Providing and fixing 15mm dia C.P. brassTwo way bib cock with C.P brass threaded wall flange complete including cutting and making good the walls wherever required.(Standerd body)
1
3727
3727.8
Providing and fixing CP Brass 32mm/40mm size Bottle Trap of approved quality & make and as per the direction of Engineer-in-charge.
30
21676
722.55
RO Plant 250 LPH (Liter per hour)PLANT CAPACITY - 250 LPH
Treated Water Quality urbidity : 1NTU pH : 6.5-7.0 Chlorides : 10 ppm Sulphates : 5 ppm TDS : 150 ppm 500L STORAGE TANK AND DRINKING FOUNTAIN
1
265011
265011.05
Supply installation, testing and commissioning of water cooler Cooling Capacity150Ltrs. / Hrs.,Storage Capacity 40 Ltrs
8
376200
47025
SUB HEAD - II - (SOIL, WASTE, RAIN WATER AND VENT PIPES)
-
-
-
RAIN WATER DRAINAGE WORK
-
-
-
Providing and laying cement concrete 1:5:10(1 cement : 5 coarse sand : 10 graded stone aggregate 20mm nominal size) around P.V.C Soil and waste pipe including bed concrete as per standard design(embedded in the flooring / ground) 100 mm dia
300
202092
673.64
Providing and fixing on wall face unplasticised-Rigid PVC rain water pipes conforming to IS: 13592 Type A including jointing with seal ring conforming to IS: 5382 leaving 10mm gap for thermal expansion. 110 mm
450
118584
263.52
Providing and fixing on wall face unplasticised PVC moulded fittings/accessories for unplasticised Rigid PVC rain water pipes conforming to IS:13592 Type A including jointing with seal ring conforming to IS:5382 leaving 10mm gap for thermal expansion.
-
-
-
Coupler 110 mm
45
4278
95.07
Bend 87.5 degree 110 mm Bend
60
6298
104.98
Shoe (Plain) 110 mm Shoe
45
4142
92.06
Providing and fixing to the inlet mouth of rain water pipe cast iron grating 15 cm diameter and weighing not less than 440 grams.
20
763
38.19
Making khurras 45x45 cm with average minimum thickness of 5 cm cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate of 20 mm nominal size) over PVC sheet 1m x 1 m x 400 micron, finished with 12 mm cement plaster 1:3 (1 cement : 3 coarse sand) and a coat of neat cement,punning,rounding the edges and making and finishing the outlet complete.
20
4165
208.25
UPVC SOIL WASTE & VENT PIPES AND FITTINGS
-
-
-
Providing and fixing in floor and wall face Ringfit SWR PVC Conventional system for soil and waste water pipes conforming to Type B including jointing with seal ring. (i) Double socketed pipes. 110mm dia SWR P.V.C. pipe
445
361451
812.25
Providing & fixing UPVC Coupler 110 mm dia.
60
19722
328.7
Cutting holes up to 30x30 cm in walls including making good the same: With With common burnt clay F.P.S. (non modular) bricks
18
5238
291.03
Cutting holes up to 15x15 cm in R.C.C. floors androofs for passing drain pipe etc. and repairing the hole after insertion of drain pipe etc. with cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size), including finishing complete so as to make it leak proof
80
25248
315.61
Providing and fixing UPVC pipes complete with fittings and clamps, including cutting and making good walls etc. ( for wash basin & Urinal waste) 40 mm dia nominal bore
280
99750
356.25
Providing and fixing upvc hooper
280
54530
194.75
Providing and fixing M.S. holder bat clamps of approved design to C.I. or S.C.I. rain water pipes embedded in and including cement concrete blocks 10x10x10 cm of 1:2:4 mix (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) and cost of cutting holes and making good the walls etc. : 100mm dia pipe.
320
81075
253.36
Providing and fixing trap of self cleansing design with screwed down or hinged grating complete, including cost of cutting and making good the walls and floors : 110mm inlet & 110mm outlet.
30
32062
1068.75
Providing and fixin SWR PVC. 90° elbow with including fittings complete. 110mm
30
9234
307.8
Providing and fixing 45° elbow with including fittings complete. 110mm
30
9348
311.6
Providing and fixing SWR PVC T Band including fittings complete. 110x110x110mm
30
14620
487.35
Providing and fixing SWR PVC Y including fittings complete. 110x110x110mm
30
13965
465.5
Providing and fixing upvc vent Cowel. 110 mm
30
6270
209
Geyser capacity 25 L. Volume (L) 25 Rated Wattage 2 Kw Voltage / Frequency (V/Hz) 230V / 50Hz Temperature Range 25ºC to 75ºC Working Pressure(Mpa) 0.8 Inlet / Outlet Connection (Inch / mm) ½ " / 12.7mm Product Dimensions (WxDxH) 25Litres 560x370x390 mm
24
373144
15547.7
SUB HEAD - III - (WATER SUPPLY)
-
-
-
Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer in Charge.
-
-
-
15 mm dia nominal bore
450
156415
347.59
20 mm dia nominal bore
350
131383
375.38
Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes,having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer in Charge.
-
-
-
25 mm dia nominal bore
150
42057
280.38
32 mm dia nominal bore
125
45277
362.22
40 mm dia nominal bore
80
39267
490.84
Providing and fixing G.I. pipes complete with G.I. fittings and clamps, i/c cutting and making good the walls etc
-
-
-
15 mm dia nominal bore
100
25584
255.84
20 mm dia nominal bore
90
27481
305.35
25 mm dia nominal bore
250
96307
385.23
32 mm dia nominal bore
75
34930
465.74
40 mm dia nominal bore
90
51021
566.91
50 mm dia nominal bore
125
91501
732.01
Painting G.I. pipes and fittings with two coats of anti-corrosive bitumastic paint of approved quality :
-
-
-
15 mm dia nominal bore
100
1355
13.55
20 mm dia nominal bore
90
1461
16.24
25 mm dia nominal bore
250
5280
21.12
32 mm dia nominal bore
60
1522
25.38
40 mm dia nominal bore
90
2680
29.78
50 mm dia nominal bore
125
4452
35.62
Providing & fixing full way lever operated forged brass ball valve of brass body with forged brass hard chrome plated steel ball tested to a pressure not less than 10 Kg / sqcm with threaded / flanged joints complete with nuts, bolts, gaskets, washers etc.
-
-
-
20 mm dia.
24
11970
498.75
25 mm dia.
35
27198
777.1
32 mm dia.
8
10260
1282.5
40 mm dia.
4
7425
1856.3
Providing and fixing motorised butterfly valve with float type sensors suitable for 240 volts with working pressure rating of not less than 5 kg/cm2 with control panel and sensors to open valve when water level is low in tanks and to close when water level is high in water tanks including necessary cables, conduits, upto junction box etc. complete. 32 mm dia.
4
99370
24842.5
Providing ,fixing, testing and commissioning butterfly valve of PN 1.6 rating with bronze / gunmetal seat duly ISI marked complete with nuts ,bolts,washers ,gaskets conforming IS 13095 of following size as required. 50 mm dia.
10
26421
2642.18
Providing and placing on terrace (at all floor levels) polyethylene water storage tank, IS: 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank.
-
-
-
25000 litre (1 Nos) Domestic
25000
192250
7.69
25000 litre (1 Nos) Fire
25000
192250
7.69
INTERNAL ELECTRIFICATION AND POWER WIRING
-
-
-
SUBHEAD I- WIRING POINTS
-
-
-
Wiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in surface / recessed medium class PVC conduit, with piano type switch, phenolic laminated sheet, suitable size M.S. box and earthing the point with 1.5 sq.mm. FRLS PVC insulated copper conductor single core cable etc. as required. Group C
1034
1089381
1053.56
Wiring for group controlled (looped) light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in surface / recessed midium class PVC conduit, with modular switch, modular plate, suitable GI box and earthing the point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable etc. as required. Group C
1034
646849
625.58
Wiring for twin control light point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in surface / recessed medium class PVC conduit, 2 way modular switch, modular plate, suitable GI box and earthing the point with 1.5 sq.mm. FRLS PVC insulated copper conductor single core cable etc as required.
16
18221
1138.87
Wiring for light/ Power plug with 2X4 sq. mm FRLS PVC insuleted copper conductor single core cable in surface/ recessed medium class PVC conduit alongwith 1 Nos. 4 sq.mm FRLS PVC insulated copper conductor single core cable for loop earthing as required.
1034
251799
243.52
Wiring for circuit/ submain wiring alongwith earth wire with the following sizes of FRLS PVC insulated copper conductor, single core cable in surface/ recessed medium class PVC conduit as required
-
-
-
2 x 2.5 sq.mm. + 1 x 2.5 sq.mm. earth wire
2500
501275
200.51
2 x 6 sq.mm. + 1 x 6 sq.mm. earth wire
450
144031
320.07
2 x 10 sq.mm. + 1 x 6 sq.mm. earth wire
50
20779
415.59
4 x 6 sq.mm. + 2 x 6 sq.mm. earth wire
75
41231
549.75
4 x 10 sq.mm. + 2 x 6 sq.mm. earth wire
900
659475
732.75
4 x 16 sq.mm. + 2 x 6 sq.mm. earth wire
450
447853
995.23
Supplying and fixing of following sizes of medium class PVC conduit along with accessories in surface/recess including cutting the wall and making good the same in case of recessed conduit as required. 25 mm
450
47574
105.72
Supplying and fixing two module stepped type electronic fan regulator on the existing modular plate switch box including connections but excluding modular plate etc. as required.
142
38203
269.04
Supplying and fixing modular blanking plate on the existing modular plate & switch box excluding modular plate as required.
35
1020
29.17
Supplying and fixing following Modular base & cover plate on existing modular metal boxes etc. as required.
-
-
-
1 or 2 Module
30
2909
96.98
3 Module
60
6606
110.1
4 Module
20
2304
115.2
6 Module
50
6635
132.7
8 Module
20
3076
153.84
12 Module
25
4958
198.32
Supplying and fixing following modular switch / socket on existing modular plate and switch box including connections but excluding modular plate etc as required.
-
-
-
5/6 amps switch
410
30791
75.1
2 Way 5/6 amps switch
16
1726
107.91
15/16 amp switch
184
20928
113.74
3 pin 5/6 amp socket outlet
410
36469
88.95
6 pin 15/16 amp socket outlet
38
5457
143.63
Telephone socket outlet
2
215
107.91
TV antenna socket outlet
6
647
107.91
Supplying and fixing call bell/ buzzer suitable for single phase,
230 V, complete as required.
2
144
72.18
Supplying & fixing suitable size GI box wih modular plate and cover in front on surface or in recess including providing and fixing 25 A modular socket outlet and 25 A modular SP MCB, "C" curve including connections, painting etc. as required.
4
2120
530.06
Supplying and drawing telephone wire following pair 0.5 sqmm FR PVC insulated annealed copper conductor, unarmoured telephone cable in the existing surface/recessed steel/PVC conduit as required.
-
-
-
2 Pair
2500
69250
27.7
10 Pair
300
37050
123.5
Supplying and drawing of UTP 4 pair CAT 6 LAN Cable in the existing surface/ recessed Steel/ PVC conduit as required. 2 run of cable
150
10500
70
Installation, testing and commissioning of ceiling fan,including wiring the down rods of standard length (upto 30 cm) with 1.5sq. mm FRLS PVC insulated, copper conductor, single core cable, including providing and fixing phenolic laminated sheet cover on the fan box etc. as required.
142
28574
201.23
Installation of exhaust fan in the existing opening , including making good the damage, connection, testing commissioning etc. as required. Up to 450mm sweep
22
7218
328.1
Extra for fixing the louvers/ shutters complete with frame for a exhaust fan of all sizes.
22
3320
150.93
Supplying and drawing co-axial TV cable RG-6 grade, 0.7 mm solid copper conductor PE insulated, shielded with fine tinned copper braid and protected with PVC sheath in the existing surface/ recessed steel/ PVC conduit as required.
250
8567
34.27
SUBHEAD II-INSTALLATION OF LIGHT FIXTURES AND FANS
-
-
-
Supply, Installation, Testing and Commissioning of 1200 mm sweep, BEE 5 star rated, ceiling fan with Brush Less Direct Current (BLDC) Motor, class of insulation: B, 3 nos. blades, 30 cm long down rod, 2 nos. canopies, shackle kit, safety rope, copper winding, Power Factor not less than 0.9, Service Value (CMM/W) minimum 6.85, Air delivery minimum 215 CMM, 350 RPM (tolerance as per IS : 374- 2019), THD less than 10%, remote or electronic regulator unit for speed control and all remaining accessories including safety pin,nut bolts, washers, temperature rise=75 degree C (max.), insulation resistance more than 2 mega ohm, suitable for 230 V, 50 Hz, single phase AC Supply, earthing etc. complete as required. 1200 mm sweep ceiling fan
142
434647
3060.9
Installation ,Testing, Commissioning of wall bracket /ceiling fittings of all sizes and shapes containing upto two GLS/CFL/LED lamps per fitting, complete with all accessories including connections etc. as required.
870
75481
86.76
Supply of recess/Surface mounting round 12 watt, cut out Min 125mm, Height Min 40mm, LED Down Lighter having Powder coated die cast aluminium housing with heat sink, diffuser/ Reflector and driver set, suitable for 24Hr continuous Operation,complete in all respec.
140
197505
1410.75
Supply of LED Tube Light 40 watt Polycarbonate tube light complete including tube etc suitable for both wall & surface complete in all respects.
86
197060
2291.4
Supply of LED Tube Light 20 watt Polycarbonate tube light complete including tube etc suitable for both surface & surface complete in all respects.
426
466214
1094.4
Supply & Fixing wired decorative light on suitable for 18 Watt CFL with lamp complete in all respect.
189
164826
872.1
Suuply and fixing of 17 watt LED Mirror Light and complete in all respect.
29
25290
872.1
SUBHEAD III-DISTIBUTION BOARD
-
-
-
Supplying and fixing following way, horizontal type three pole and neutral, sheet steel, MCB distribution board, 415 V, on surface/ recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections, powder painted including earthing etc. as required. (But without MCB/RCCB/Isolator)
-
-
-
4 way Double door (4 + 12)
8
23862
2982.78
6 way Double door (4 + 18)
8
29012
3626.58
Supplying and fixing Cable End Box (Loose wire box)(IP 43) suitable for following triple pole and neutral, sheet steel, MCB distribution board, 415 V, on surface/ recess, complete with testing and commissioning etc. as required.
-
-
-
For 4 way, Double door TPN MCBDB
8
6299
787.44
For 6 way, Double door TPN MCBDB
8
6556
819.52
Supplying and fixing 5 amps to 32 amps rating, 240/415 volts, "C" curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required. Single pole
610
113862
186.66
Supplying and fixing 240/415 volts, "C" curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required.
-
-
-
63A 4P
8
24350
3043.8
40A 4P
8
24350
3043.8
Supplying and fixing single pole blanking plate in the existing MCB DB complete etc. as required.
56
530
9.48
SUBHEAD IV-EARTHING
-
-
-
Suplly and burring of safe Earthing Electrode T-39 Cu Copper Coated, Length 2000mm, outer pipe 76.3mm X 3.2 inner pipe 42.4mm X 2.6mm, terminal Dia 12mm, coating 80-100 micron filled with crystalline conductive mixture (CCM) having anti corrosive & conductive property with 50kgs activated soil (BFC) capable of reucing the soil resistivity with good mixture of retaining capacity along with 30cm square C.I. frame withhinged cover & mansonry housing.(From electrode terminal to switch board, cost of 25x3 copper strip will be extra) Make: As approved in U.P.P.W.D & C.P.R.I. all respects.
4
29275
7318.8
Providing and fixing 25 mm X 5 mm copper strip on surface or in recess for connections etc. as required.
4
3388
847.22
Providing and fixing 25 mm X 5 mm G.I. strip on surface or in recess for connections etc. as required.
80
14232
177.91
Providing and fixing 6 SWG dia G.I. wire on surface or in recess for loop earthing as required.
600
30618
51.03
SUBHEAD V-CABLES
-
-
-
Supplying and making end termination with brass compression gland and aluminium lugs for following size of PVC insulated and PVC sheathed / XLPE aluminium conductor cable of 1.1 kV grade as required.
-
-
-
4 X 16 sq. mm (28mm)
8
1802
225.29
4 X 10 sq. mm (25mm)
8
1569
196.13
Laying and fixing of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 KV grade of following size on cable tray as required. Upto 35 sq. mm
600
19686
32.81
SUBHEAD VI -MISCELLANEOUS
-
-
-
Supply, Installation, Testing and Commissioning of 250mm size PVC exhaust fan suitable for 230V, 50 Hz AC including modifying and finishing for hole/opening for the size of fan, MS louver/ shutter complete with frame for Ex.fan including its connection with 3x1.5 sq mm FRLS copper conductor wire with PVC sleeve, loop earthing, making the good damage complete as required to do the job in all respect in accordance with laid specification or upto the satisfaction of engineer in charge.
22
62344
2833.85
S/f of 10 pair Telephone Tag Block for Floors and building with Krone connectors , with connection and punching of same
4
9781
2445.3
SUBHEAD VII-MAIN L. T. PANELS
-
-
-
LT PANEL
-
-
-
Design, Supply, installation, testing and commissioning of indoor/outdoor floor mounted/ wall mounted, IP43/IP65, IEC 61439/IS 8623, factory built, modular, sectionalised, compartmentalized, extendable type HT/LT cubicle panel of suitable size suitable for operation on 33/11/0.433/0.415 kV, 50 Hz AC 3 phase supply system fabricated from CRCA sheet steel of 2mm thick for frame work and covers, 3mm thick for gland plates with stiffeners wherever required, having vibration free structure chemically treated with seven tank process or better before painting for surface treatment and powder coated in approved shade, with suitable electrolytic grade high conductivity bus bars extensible, DMC/ SMC (whichever is superior) bus bar supports, with short circuit withstand capacity as mentioned ,bottom base channel of section not less than 100mmX 50mmX 5 mm thick, fabrication shall be done in transportable sections, entire panel shall have a common earth bar of required size at the rear with 2 Nos. earth stud, connections and interconnection with solid conductor wires / copper strips, neutral links, control wiring with 1.5 sqmm. & 2.5sqmm. PVC insulated FRLS copper conductor S/C cable for voltage & current respectively, including providing and fixing following switch gears as per SLD ,technical specifications etc.complete in all respect so as to fulfill all as required.
-
-
-
The minimum clearances between bus bars shall be as follows :
-
-
-
Phase to phase - minimum 20mm
-
-
-
Phase to neutral-minimum 15mm
-
-
-
Incoming :
-
-
-
1Nos 250 Amp. 4P MCCB of 36kA Breaking capacity
-
-
-
Metering :
-
-
-
1 Set of CT's one of 250/ 5Amp ratio for Multifunction Meter
-
-
-
1 Set of CT's one of 250/ 5Amp ratio 50/51/86/95
-
-
-
1 Nos. Set of Phase Indication Lamp.
-
-
-
1 Nos. of class-III Type SPD
-
-
-
Bus Bar :
-
-
-
400 Amp.TPN aluminimum bus bar of suitable length.50KA
-
-
-
Outgoing :
-
-
-
Phase indication lamps on each outgoing to be provided.
-
-
-
01 No.63 Amp 4P MCCB. (25 KA)
-
-
-
02 No.63 Amp 4P MCB. (10 KA)
-
-
-
10 No.40 Amp 4P MCB. (10 KA)
-
-
-
Panel described as above
1
272175
272175
SUBHEAD VIII-CABLE TRAY & RACEWAY
-
-
-
Supplying and installing following size of perforated Hot Dipped Galvanised Iron cable tray (Galvanisation thickness not less than 50 microns) with perforation not more than 17.5%, in convenient sections, joined with connectors, suspended from the ceiling with G.I. suspenders including G.I. bolts & nuts, etc. as required. 100 mm wide x 50 mm depth x 1.6 mm thickness.
50
24389
487.78
FIRE FIGHTING SYSTEM
-
-
-
SUBHEAD-I FIRE HYDRANT SYSTEM
-
-
-
Supplying, installation, testing and commissioning of electric driven terrace pump suitable for automatic operation and consisting of following, complete in all respects, as required: (Terrace Pump) (a)Horizontal type, multistage, centrifugal, split casing pump of cast iron body & bronze impeller with stainless steel shaft, mechanical confirming to IS : 1520 b) Suitable HP squirell cage induction motor TEFC type suitable for operation on 415 volts, 3 phase, 50 Hz, AC supply with IP55 class of protection for enclosure, horiziontal foot mounted type with Class-'F' insulation, conforming to IS-325. (c) M.S.fabricated common base plate, coupling, coupling guard, foundation bolts etc.as required. (d) Suitable cement concrete foundation duly plastered and with anti vibration pads. 450 lpm at 35 m Head
1
62851
62851.28
Providing and fixing in position the industrial type pressure gauges with gun metal / brass valves complete as required
2
1744
872.01
Air Release Valve, Gunmetal, having rubber ball with 1” (25mm) BSP Male threaded inlet
2
2597
1298.65
Supplying and fixing air vessel made of 250 mm dia, 8 mm thick MS sheet, 1200 mm in height with air release valve on top and flanged connection to riser, drain arrangement with 25 mm dia gun metal wheel valve with required accessories, pressure gauge and paintingwith synthetic enamel paint of approved shade as required.
2
26603
13301.84
Providing, laying, of 'C' class heavy duty MS pipe conforming to IS 3589/IS 1239 including Welding, fittings like elbows, tees, flanges, tapers, nuts bolts, gaskets etc. and fixing the pipe on the wall/ceiling with suitable clamp/support frame and painting with two or more coats of synthetic enamel paint of required shade complete as required : 100 mm dia
248
461991
1862.87
Supplying, fixing, testing and commissioning of butterfly valve of PN 1.6 rating with bronze/gunmetal seat duly ISI marked complete with nuts, bolts, washers, gaskets conforming to IS 13095 of following sizes as required : 100 mm dia
2
9721
4860.96
Providing, installation, testing and commissioning of non-return valve of following sizes confirming to IS: 5312 complete with rubber gasket, GI bolts, nuts, washers etc.as required : 100mm dia
2
16113
8056.64
Supplying and fixing orifice plate made out of 6 mm thick stainless steel (Grade 304) with orifice of required size to be fitted between flange & landing valve of external and internal hydrants to reduce pressure at the outlet to the level of 3.5 kg/cm2 complete as required.
2
1926
963.15
INTERNAL HYDRANT
-
-
-
Supplying and fixing first-aid Hose Reel with MS construction spray painted in post office red, conforming to IS 884 complete with the following as required. 20 mm nominal internal dia water hose thermoplastic (Textile reinforced) type -2 as per IS: 12585 20 mm nominal internal dia gun metal globe valve & nozzle.Drum and brackets for fixing the equipmets on wall. Connections from riser with 25 mm dia stop gun metal valve & M.S. Pipe and socket. 30 m
8
50600
6325.01
Supplying & fixing 63 mm dia gun metal short branch pipe with 20 mm nominal internal diameter size nozzle conforming to IS 903 suitable for instantaneous connection to interconnect hose pipe coupling as required : Gun metal
8
14092
1761.53
Fireman Axe-made of carbon steel with rubber insulated handle tested to 20,000 Volts as per IS:926 Make: NEWAGE
8
8253
1031.7
Fire shaft door fabricated out of M.S. sheet and frame, door size of 1200 (W) x 2100 (h) with 4 mm thick glass, suitable Rubber beading and Locking arrangement and complete door shall be powder coated with red color powder coating
8
102106
12763.25
Supplying and fixing of fire brigade connection of cast iron body with gun metal male instantaneous inlet couplings complete with cap and chain as reqd. for suitable dia MS pipe connection conforming to IS 904 as required : 2 way-100 mm dia M.S. Pipe
2
9831
4915.64
TOTAL SUB-
-
-
-
SUBHEAD-II : FIRE EXTINGUSHER
-
-
-
Providing, storing, handling, shifting, installation, testing and commissioning of halon free portable fire Extinguishers as described below: Co2 type Fire Extinguisher 4.5 Kgs. Capacity, made from brand new seamless cylinder, as per IS: 7285 and CCE approval, fitted with Discharge hose and horn and wheel type valve with initial Charge as per IS: 15683:2018 specification, bearing ISI Mark & EIL approved. Make: SAFEX Capacity 4.5KG
16
117450
7340.65
Providing and fixing of ABC Power type fire extinguishers consisting of welded M.S. cylindrical body, squeeze lever discharge valve fitted with pressure indicating gauge internal discharge tube 30 cm long high pressure discharge hose, discharge nozzle, suspension bracket. Conforming to IS: 15683 finished externally with red enamel paint fixed to wall with brackets complete with internal charge. Capacity 6KG
16
61590
3849.4
Providing and fixing Fire related signages printed on photoluminescent U1000 aluminium sheet of 1.0 mm (+-10%) containing Lumigen II as base chemical, covered under UV stablized coating and of appropriate size including fixing on wall, door, ceiling etc. with proper clamps, hangers, cleats, anchor fasteners etc. complete in all respects as directed by Engineer-in-charge.
16
9317
582.35
TOTAL SUB-
-
-
-
SUBHEAD-III : FIRE CONTROL PANELS
-
-
-
Supply installation, testing and commissioning of approved make DOL starter 7.5 hp, 3 phase, 50 Hz, 415V, i/c single phase preventer, incoming MCB 32A 4P, 10KA , in outdoor type enclosure, connections, as required as per specifications.
2
13427
6713.65
Copper Power Cables, Solid Copper Conductor upto 6 sq. mm & Balance Stranded Copper, XLPE Insulated, Cores Laid Up, PVC Innersheathed, Unarmoured/Armoured (Glavanised wire for cables up to 10x1.5 sq. mm, 8x2.5 sq. mm, 2x10 sq. mm, 3x10 sq. mm, 4x6 sq.
mm & balance all galvanised steel strip), Extruded PVC Type ST2 Outer Sheathed, 650/1100 V Grade as per IS 7098 4 Core X 10 sqmm. Aluminium Armoured
100
95760
957.6
Supplying and making end termination with brass double compression gland and aluminium lugs for following size of XLPE insulated and PVC sheathed / XLPE aluminium conductor cable of 1.1 KV grade as required. It should be complete as per specifications & directions of Engineer-in-charge. 4 Core X 10 sqmm. Aluminium Armoured
8
1569
196.13
Supplying and drawing following sizes of FRLS PVC insulated copper conductor, single core cable in the existing surface/ recessed steel/ PVC conduit as required
-
-
-
6 C x 2.5 Sqmm
50
9660
193.21
2 C x 2.5 Sqmm
50
3572
71.45
Supplying and fixing of following sizes of steel conduit along with accessories in surface/recess including painting in case of surface conduit, or cutting the wall and making good the same in case of recessed conduit as required.
-
-
-
25 mm Conduit
50
9333
186.66
32 mm Conduit
90
21392
237.69
Supplying and installing following size of perforated pre-painted M.S. cable trays with perforation not more than 17.5%, in convenient sections, joined with connectors, suspended from the ceiling with M.S. suspenders including bolts & nuts, painting suspenders etc as required. 150 mm width x 50mm depth x 1.6 mm thickness.
35
15413
440.38
Supplying and fixing of Self Glow Exit signage for stairs and exits size 100 x 300. Make :- Rcube Fire Protection Services Pvt. Ltd. /R.K. Engineers Services. CE Certified, ISO 13485:2016 & OHSAS 18001:2007 Approved..or eq
16
41800
2612.5
(B) GIRLS HOSTEL
-
-
-
Earth work in excavation by mechanical means (Hydraulic excavator) / manual means over areas (exceeding 30cm in depth. 1.5m in width as well as 10 Sqm on plan) including disposal of excavated earth, lead upto 50m and lift upto 1.5m, disposed earth to be levelled and neatly dressed.
352.28
43661
123.94
Filling available excavated earth (excluding rock) in trenches, plinth,sides of foundations etc. in layers not exceeding 20cm in depth, consolidating each deposited layer by ramming and watering, lead up to 50 m and lift upto 1.5 m.
246.6
33749
136.86
Excavating, supplying and filling of local earth (including royalty) by mechanical transport upto a lead of 5km also including ramming and watering of the earth in layers not exceeding 20 cm in trenches, plinth, sides of foundation etc. complete.
31.55
15432
489.13
Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level : 1:4:8 (1 Cement : 4 coarse sand : 8 graded stone aggregate 40 mm nominal size)
67.75
322251
4756.48
Supplying and filling in plinth with sand under floors, including watering, ramming, consolidating and dressing complete.
57.46
85208
1482.91
Treatment of soil under existing floors using chemical emulsion @ one litre per hole, 300 mm apart including drilling 12 mm diameter holes and plugging with cement mortar 1:2 (1 cement:2 coarse sand) to match the existing floor. With Chlorpyriphos/ Linadane E.C. 20% with 1% concentration.
405.25
87736
216.5
Providing and laying in position ready mixed or site batched design mix cement concrete for reinforced cement concrete work; using coarse aggregate and fine aggregate derived from natural sources, Portland Pozzolana / Ordinary Portland /Portland Slag cement, admixtures in recommended proportions as per IS: 9103 to accelerate / retard setting of concrete, to improve durability and workability without impairing strength; including pumping of concrete to site of laying, curing, carriage for all leads; but excluding the cost of centering, shuttering, finishing and reinforcement as per direction of the engineer-in-charge; for the following grades of concrete.Note: Extra cement up to 10% of the minimum specified cement content in design mix shall be payable separately. In case the cement content in design mix is more than 110% of the specified minimum cement content, the contractor shall have discretion to either re-design the mix or bear the cost of extra cement.Concrete of M25 grade with minimum cement content of 330 kg /cum
-
-
-
(a) Ground Floor
2.97
20448
6885.02
(b) First Floor
2.73
18796
6885.02
(c) Second Floor
2.68
18451
6885.02
(d) Third Floor
2.57
17694
6885.02
(e) Terrace Floor
0.14
963
6885.02
As in item above but for slabs (Using M-25 Mix concrete).
-
-
-
(a) Ground Floor
58.28
401258
6885.02
(b) First Floor
57.36
394924
6885.02
(c) Second Floor
57.41
395269
6885.02
(d) Third Floor
58.48
402635
6885.02
(e) Terrace Floor
3.24
22307
6885.02
As in item above but for the lighter beams i.e. having spans upto 6 m.
-
-
-
(a) Ground Floor
68.61
472381
6885.02
(b) First Floor
33.86
233126
6885.02
(c) Second Floor
33.86
233126
6885.02
(d) Third Floor
31.67
218048
6885.02
(e) Terrace Floor
2.34
16110
6885.02
As in item above but in R.C.C. Raft foundation and footing with approved stone ballast.
290.37
1927095
6636.69
Boring with hydraulic piling rigs with power units, Providing and installing cast in situ single under reamed piles of specified diameter and length below pile cap in M-25 cement concrete, to carry a safe working load not less than specified, excluding the cost of steel reinforcement but including the cost of boring with bentonite solution and the length of the pile to be embedded in pile cap etc. all complete. (Length of pile for payment shall be measured upto to the bottom of pile cap) :400 mm dia piles
2020
5355969
2651.47
As in item but for the Column.
-
-
-
(a) Ground Floor
24.57
169164
6885.02
(b) First Floor
20.2
139077
6885.02
(c) Second Floor
20.2
139077
6885.02
(d) Third Floor
20.2
139077
6885.02
(e) Terrace Floor
2.07
14251
6885.02
Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in foundation and plinth in:Cement mortar 1:6 (1 cement : 6 coarse sand)
23.84
118737
4980.58
Painting on D.P.C. with two coats of airblown bitumen 85/50 or 85/25 @ 1.7 kg/sqm approx. including cost of fuel if any.
54.5
5561
102.05
Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in superstructure above plinth level up to floor V level in all shapes and sizes in :Cement mortar 1:6 (1 cement : 6 coarse sand)
-
-
-
(a) Ground Floor
112.91
717907
6358.23
(b) First Floor
114.76
729670
6358.23
(c) Second Floor
115.41
733803
6358.23
(d) Third Floor
118.45
753132
6358.23
(e) Terrace Floor
47.29
300680
6358.23
Half brick masonry with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in superstructure above plinth level up to floor V level.Cement mortar 1:4 (1 cement :4 coarse sand)
-
-
-
(a) Ground Floor
438.58
344149
784.69
(b) First Floor
388.46
304820
784.69
(c) Second Floor
440.36
345546
784.69
(d) Third Floor
200.49
157322
784.69
Mild steel or iron in plain work such as reinforced concrete or reinforced, brick work (when not included in anover all rates ) wrought to required shape as necessary including bending for proper completion of the work and including supply of steel its wastage bend hooks and authorised over lapping shall be measured upto floor two level.
-
-
-
(a) Ground Floor
659.88
4969312
7530.63
(b) First Floor
151.45
1140513
7530.63
(c) Second Floor
151.44
1140438
7530.63
(d) Third Floor
148.79
1120482
7530.63
(e) Terrace Floor
11.56
87054
7530.63
15 mm cement plaster on rough side of single or half brick wall of mix : 1:4 (1 cement: 4 coarse sand).
70.08
20148
287.51
15 mm cement plaster on rough side of single or half brick wall of mix:1:6 (1 cement: 6 coarse sand)
-
-
-
(a) Ground Floor
854.88
235989
276.05
(b) First Floor
844.19
233038
276.05
(c) Second Floor
847.02
233819
276.05
(d) Third Floor
876.79
242037
276.05
(e) Terrace Floor
44.73
12347
276.05
12 mm cement plaster of mix :1:6 (1 cement: 6 coarse sand)
-
-
-
(a) Ground Floor
525.69
126139
239.95
(b) First Floor
466.15
111852
239.95
(c) Second Floor
447.5
107377
239.95
(d) Third Floor
461
110616
239.95
(e) Terrace Floor
424.18
101781
239.95
Add for plaster drip course/ groove in plastered surface or moulding to R.C.C. projections.
1457.37
79776
54.74
Kota stone slab flooring over 20 mm (average) thick base laid over and jointed with grey cement slurry mixed with pigment to match the shade of the slab, including rubbing and polishing complete with base of cement mortar 1 : 4 (1 cement : 4 coarse sand) :25 mm thick
-
-
-
(a) Ground Floor
224.64
305591
1360.36
(b) First Floor
142.23
193484
1360.36
(c) Second Floor
142.23
193484
1360.36
(d) Third Floor
134.68
183213
1360.36
(e) Terrace Floor
5.53
7522
1360.36
Kota stone slabs 20 mm thick in risers of steps, skirting, dado and pillars laid on 12 mm (average) thick cement mortar 1:3 (1 cement: 3 coarse sand) and jointed with grey cement slurry mixed with pigment to match the shade of the slabs, including rubbing and polishing complete.
-
-
-
(a) Ground Floor
14.93
24547
1644.17
(b) First Floor
13.29
21851
1644.17
(c) Second Floor
13.29
21851
1644.17
(d) Third Floor
14.6
24004
1644.17
(e) Terrace Floor
1
1644
1644.17
Providing and laying Ceramic glazed floor tiles of size 300x300 mm (thickness to be specified by the manufacturer) of 1st quality conforming to IS : 15622 of approved make in colours such as White, Ivory, Grey, Fume Red Brown, laid on 20 mm thick cement mortar 1:4 (1 Cement : 4 Coarse sand), Jointing with grey cement slurry @ 3.3 kg/sqm including pointing the joints with white cement and matching pigment etc., complete.
-
-
-
(a) Ground Floor
132.02
101082
765.66
(b) First Floor
181.3
138814
765.66
(c) Second Floor
181.3
138814
765.66
(d) Third Floor
181.3
138814
765.66
Providing and laying vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS: 15622, of approved make, in all colours and shades, laid on 20mm thick cement mortar 1:4 (1 cement : 4 coarse sand), jointing with grey cement slurry @ 3.3 kg/ sqm including grouting the joints with white cement and matching pigments etc., complete.Size of Tile 600x600 mm
-
-
-
(a) Ground Floor
181.76
197155
1084.7
(b) First Floor
171.32
185830
1084.7
(c) Second Floor
171.32
185830
1084.7
(d) Third Floor
158.65
172087
1084.7
Providing and laying Vitrified tiles in different sizes (thickness to be specified by manufacturer), with water absorption less than 0.08 % and conforming to I.S. 15622, of approved make, in all colours & shade, in skirting, riser of steps, over 12 mm thick bed of cement mortar 1:3 (1 cement: 3 coarse sand), jointing with grey cement slurry @ 3.3 kg/ sqm including grouting the joint with white cement & matching pigments etc. complete.Size of Tile 600x600 mm
-
-
-
(a) Ground Floor
18.81
21317
1133.29
(b) First Floor
18.96
21487
1133.29
(c) Second Floor
18.96
21487
1133.29
(d) Third Floor
19.77
22405
1133.29
Providing and fixing 18mm thick gang saw cut mirror polished premoulded and prepolished) machine cut for kitchen platforms, vanity counters, window sills , facias and similar locations of required size of approved shade, colour and texture laid over 20mm thick base cement mortar 1:4 (1 cement : 4 coarse sand) with joints treated with white cement, mixed with matching pigment, epoxy touch ups, including rubbing, curing, moulding and polishing to edges to give high gloss finish etc. complete at all levels. Granite of any colour and shade.
-
-
-
(a) Ground Floor
13.02
46695
3586.42
(b) First Floor
3.79
13592
3586.42
(c) Second Floor
3.79
13592
3586.42
(d) Third Floor
3.79
13592
3586.42
Making plinth protection 50mm thick of cement concrete 1:3:6 (1 cement : 3 coarse sand (zone-III) derived from natural sources : 6 graded stone aggregate 20 mm nominal size derived from natural sources) over 75mm thick bed of dry brick ballast 40 mm nominal size, well rammed and consolidated and grouted with fine sand, including necessary excavation, levelling & dressing & finishing the top smooth
82.29
43054
523.2
Providing and fixing ISI marked flush door shutters conforming to IS : 2202 (Part I) non-decorative type, core of block board construction with frame of 1st class hard wood and well matched commercial 3 ply veneering with vertical grains or cross bands and face veneers on both faces of shutters: (Both side laminated)
-
-
-
(a) 35 mm thick including ISI marked Stainless Steel butt hinges with necessary screws. Single leaf.
158.27
370066
2338.2
(b) Double leaf
23.94
57760
2412.7
Providing and fixing mild steel round holding down bolts with nuts and washer plates complete.
524.4
35591
67.87
Steel work welded in built up sections/ framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required.In gratings, frames, guard bar, ladder, railings, brackets, gates and similar works
3026.03
364697
120.52
Z-Section steel windows (openable)
4034.7
361307
89.55
Angle iron door chaukhats 40*40*5
1484.55
135272
91.12
Providing & fixing fly proof wire gauze to windows, clerestory windows & doors with M.S. Flat 15x3 mm and nuts & bolts complete.
201.74
159677
791.5
Distempering (Two coat) with oil bound distemper of approved brand and manufacture & of required shade on undecorated wall surface to give an even shade over & including a priming coat with cement primer of approved brand & manufacture such as Berger,J&N, Shalimar, Asian paints after thoroughly brushing the surface free from mortar droppings & other foreign matters & also including preparing the surface even with plaster of paris or approved synthetic material & sand papered smooth including cost ofall materials. (For Internal wall surface)
-
-
-
(a) Ground Floor
854.88
110818
129.63
(b) First Floor
844.19
109432
129.63
(c) Second Floor
847.02
109799
129.63
(d) Third Floor
876.79
113658
129.63
(e) Terrace Floor
44.73
5798
129.63
Finishing walls with Premium Acrylic Smooth exterior paint with Silicone additives of required shade:New work (Two or more coats applied @ 1.43 ltr/10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/10 sqm)(Outer surface)
-
-
-
(a) Ground Floor
525.69
62804
119.47
(b) First Floor
466.15
55690
119.47
(c) Second Floor
447.5
53462
119.47
(d) Third Floor
461
55075
119.47
(e) Terrace Floor
424.18
50676
119.47
Distempering (Two coat) with oil bound distemper of approved brand and manufacture & of required shade on undecorated wall surface to give an even shade over & including a priming coat with cement primer of approved brand & manufacture such as Berger,J&N, Shalimar, Asian paints after thoroughly brushing the surface free from mortar droppings & other foreign matters & also including preparing the surface even with plaster of paris or approved synthetic material & sand papered smooth including cost ofall materials. +
-
-
-
(a) Ground Floor
403.43
52296
129.63
(b) First Floor
399.21
51749
129.63
(c) Second Floor
399.67
51809
129.63
(d) Third Floor
429.84
55720
129.63
(e) Terrace Floor
21.55
2793
129.63
Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete.
-
-
-
(a) Ground Floor
1784
194402
108.97
(b) First Floor
1709.54
186288
108.97
(c) Second Floor
1694.19
184615
108.97
(d) Third Floor
1767.63
192618
108.97
(e) Terrace Floor
490.46
53445
108.97
Providing and fixing aluminium hanging floor door stopper, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour and shade, with necessary screws etc. complete. Twin rubber stopper
97
4900
50.52
Providing and fixing aluminium sliding door bolts, ISI marked anodised (anodic coating not less than grade AC 10 as per IS : 1868), transparent or dyed to required colour or shade, with nuts and screws etc. complete : (a) 250mm x 16mm.
97
17650
181.96
Providing and fixing aluminium tower bolts, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868 ) transparent or dyed to required colour or shade, with necessary screws etc. complete :
-
-
-
(a) 250 mm x 10mm
97
7799
80.41
(a) 200 mm x 10mm
97
6753
69.62
Providing and fixing aluminium handles, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade, with necessary screws etc. complete : 125mm (For Doors)
194
8974
46.26
Providing and laying integral cement based water proofing treatment including preparation of surface as required for treatment of roofs, balconies, terraces etc consisting of following operations: a) Applying a slurry coat of neat cement using 2.75 kg/sqm of cement admixed with water proofing compound conforming to IS. 2645 and approved by Engineer-in-charge over the RCC slab including adjoining walls upto 300 mm height including cleaning the surface before treatment. b) Laying brick bats with mortar using broken bricks/brick bats 25 mm to 115 mm size with 50% of cement mortar 1:5 (1 cement : 5 coarse sand) admixed with water proofing compound conforming to IS : 2645 and approved by Engineer-in-charge over 20 mm thick layer of cement mortar of mix 1:5 (1 cement :5 coarse sand ) admixed with water proofing compound conforming to
399.4
469802
1176.27
Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade.Two or more coats on new work over an under coat of suitable shade with ordinary paint of approved brand and manufacture : (M.S. works).
347.35
54874
157.98
Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade.Two or more coats on new work over an under coat of suitable shade with ordinary paint of approved brand and manufacture : (Wood works).
485.37
76678
157.98
Providing & fixing glass panes with putty and glazing clips in steel doors, windows, clerestory windows, all complete with : 4.0 mm thick glass panes
201.74
149971
743.39
Providing & laying of light cinder filling under floor of toilets & other sunken roofs.
47.17
112028
2375
Providing and laying water proofing treatment in sunken portion of WCs, bathroom etc., by applying cement slurry mixed with water proofing cement compound consisting of applying : (a) First layer of slurry of cement @ 0.488 kg/sqm mixed with water proofing cement compound @ 0.253 kg/ sqm. This layer will be allowed to air cure for 4 hours. (b) Second layer of slurry of cement @ 0.242 kg/sqm mixed with water proofing cement compound @ 0.126 kg/sqm. This layer will be allowed to air cure for 4 hours followed with water curing for 48 hours. The rate includes preparation of surface, treatment and sealing of all joints, corners, junctions of pipes and masonry with polymer mixed slurry.
203.76
87790
430.85
Providing and fixing stainless steel ( Grade 304) railing made of Hollow tubes, channels, plates etc., including welding, grinding, buffing, polishing and making curvature (wherever required) and fitting the same with necessary stainless steel nuts and bolts complete, i/c fixing the railing with necessary accessories & stainless steel dash fasteners , stainless steel bolts etc., of required size, on the top of the floor or the side of waist slab with suitable arrangement as per approval of Engineer-in-charge.
562.14
303173
539.32
Chequerred precast cement concrete tiles 22 mm thick in footpath & courtyard, jointed with neat cement slurry mixed with pigment to match the shade of tiles, including rubbing and cleaning etc. complete, on 20 mm thick bed of cement mortar 1:4 (1 cement: 4 coarse sand). Ordinary cement without any pigment
8.64
6372
737.6
Providing and fixing ISI marked flush door shutters conforming to IS : 2202 (Part I) decorative type, core of block board construction with frame of 1st class hard wood and well matched teak 3 ply veneering with vertical grains or cross bands and face veneers on both faces of shutters.25 mm thick (for cupboard) including ISI marked nickel plated bright finished M.S. Piano hinges IS : 3818 marked with necessary screws
121.72
239610
1968.54
Foundations, footings, bases of columns, etc. for mass concrete
221.46
60640
273.82
Columns, Pillars, Piers, Abutments, Posts and Struts
1101.33
739245
671.23
Lintels, beams, plinth beams, girders, bressumers and cantilevers with water proof ply 12 mm thick
2102.8
1236215
587.89
Suspended floors, roofs, landings, balconies and access platform with water proof ply 12 mm thick
1903.58
1366922
718.08
INTERNAL W/S AND SANITATION
-
-
-
SUB HEAD - I - (SANITARY FIXTURES & INTERNAL PLUMBING)
-
-
-
Providing and fixing water closet squatting pan (Indian type W.C. pan ) with 100 mm sand cast Iron P or S trap, 10 litre low level white P.V.C. flushing cistern, including flush pipe, with manually controlled device (handle lever) conforming to IS : 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required: White Vitreous china Orissa pattern W.C. pan of size 580x440 mm with integral type foot rests
7
33077
4725.34
Providing and fixing white vitreous china pedestal type water closet (European type) with seat and lid, 10 litre low level white vitreous china flushing cistern & C.P. flush bend with fittings & C.I. brackets, 40 mm flush bend, overflow arrangement with specials of standard make and mosquito proof coupling of approved municipal design complete, including painting of fittings and brackets, cutting and making good the walls and floors wherever required W.C. pan with ISI marked white solid plastic seat and lid
9
50315
5590.61
Handicap toilet :-
-
-
-
Providing and fixing of WB 46 x 36 with one pair mounting brackets, EWC & Cistern complete with fittings & seat cover, one no. hinged rail 76 cm & 4 nos. of grab rails 60 cm.
1
38919
38919.6
Providing and fixing wash basin with C.I. brackets, 15 mm C.P. Brass pillar taps, 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever require: White Vitreous China Wash basin size 630x450 mm with a pair of 15 mm C.P. brass pillar taps.
22
40690
1849.56
Providing and fixing Stainless Steel AISI 304(18/8) kitchen sink as per IS : 13983 with C.I. brackets and stainless steel plug 40mm including painting of fittings and brackets, cutting and making good the walls wherrerever required. Kitchen sink with drain board Size 510x1040 mm bowl depth 250mm
1
4849
4849.77
Providing and fixing P.V.C. waste pipe for sink or wash basin including P.V.C. waste fittings complete. Semi rigid pipe 40 mm dia
1
81
81.48
Providing & fixing C.P. hand spray with lever control (health faucet) and flexible hose 1 m long connection with C.P. holder for hand spray complete in all respects. (Angle valve to be provide under item no. 18 and measure with that item.)
9
10642
1182.47
Providing and fixing 600 x 450mm beveled edge mirror of superior glass (of approved quality) complete with 6 mm thick hard board ground fixed to wooden cleats with C.P. brass screws and washers complete in all respect.
22
24700
1122.75
Providing and fixing uplasticised PVC connection pipe with brass unions : 30 cm length 15 mm nominal bore
65
3858
59.36
Providing and fixing brass stop cock of approved quality : 15 mm nominal bore
34
8386
246.66
PProviding and fixing PTMT liquid soap container 109 mm wide, 125 mm high and 112 mm distance from wall of standard shape with bracket of the same materials with snap fittings of approved quality and colour, weighing not less than 105 gms.
36
4231
117.55
Providing and fixing toilet paper holder. C.P. brass
9
5050
561.18
Providing and fixing C.P. brass long body bib cock of approved quality conforming to IS standards and weighing not less than 690 gms. 15 mm nominal bore
23
12831
557.87
Providing and fixing CP Brass Single lever telephonic wall mixer of quality & make as approved by Engineer in charge. (For bath) . 15 mm nominal bore
14
67849
4846.38
Providing and fixing C.P. brass shower rose with 15 or 20mm inlet 150 mm diameter
14
2173
155.26
Providing and fixing C.P. brass stop cock (concealed) of standard design and of approved make conforming to IS: 8931. 15 mm nominal bore
14
6553
468.14
Providing and fixing C.P. brass angle valve for basin mixer and geyser points of approved quality conforming to IS 8931 (including angle valve for WC flushing cistern, jet & kitchen sink) 15 mm nominal bore
53
21253
401
Providing and fixing brass bib cock of approved quality 15 mm nominal bore
24
5919
246.66
Providing and fixing 15mm dia C.P. brassTwo way bib cock with C.P brass threaded wall flange complete including cutting and making good the walls wherever required.(Standerd body)
1
3727
3727.8
Providing and fixing CP Brass 32mm/40mm size Bottle Trap of approved quality & make and as per the direction of Engineer-in-charge.
23
16618
722.55
RO Plant 250 LPH (Liter per hour) PLANT CAPACITY - 250 LPH
Treated Water Quality
Turbidity : 1NTU
pH : 6.5-7.0
Chlorides : 10 ppm
Sulphates : 5 ppm
TDS : 150 ppm 500L STORAGE TANK AND DRINKING FOUNTAIN
1
265011
265011.05
Supply installation, testing and commissioning of water cooler Cooling Capacity150Ltrs. / Hrs.,Storage Capacity 40 Ltrs
4
188100
47025
SUB HEAD - II - (SOIL, WASTE, RAIN WATER AND VENT PIPES)
-
-
-
RAIN WATER DRAINAGE WORK
-
-
-
Providing and laying cement concrete 1:5:10(1 cement : 5 coarse sand : 10 graded stone aggregate 20mm nominal size) around P.V.C Soil and waste pipe including bed concrete as per standard design(embedded in the flooring / ground) 100 mm dia
90
60627
673.64
Providing and fixing on wall face unplasticised-Rigid PVC rain water pipes conforming to IS: 13592 Type A including jointing with seal ring conforming to IS: 5382 leaving 10mm gap for thermal expansion. 110 mm
170
44798
263.52
Providing and fixing on wall face unplasticised PVC moulded fittings/accessories for unplasticised Rigid PVC rain water pipes conforming to IS:13592 Type A including jointing with seal ring conforming to IS:5382 leaving 10mm gap for thermal expansion.
-
-
-
Coupler 110 mm
35
3327
95.07
Bend 87.5 degree 110 mm Bend
45
4724
104.98
Shoe (Plain) 110 mm Shoe
25
2301
92.06
Providing and fixing to the inlet mouth of rain water pipe cast iron grating 15 cm diameter and weighing not less than 440 grams.
12
458
38.19
Making khurras 45x45 cm with average minimum thickness of 5 cm cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate of 20 mm nominal size) over PVC sheet 1m x 1 m x 400 micron, finished with 12 mm cement plaster 1:3 (1 cement : 3 coarse sand) and a coat of neat cement,punning,rounding the edges and making and finishing the outlet complete.
12
2499
208.25
UPVC SOIL WASTE & VENT PIPES AND FITTINGS
-
-
-
Providing and fixing in floor and wall face Ringfit SWR PVC Conventional system for soil and waste water pipes conforming to Type B including jointing with seal ring. (i) Double socketed pipes. 110mm dia SWR P.V.C. pipe
150
121837
812.25
Providing & fixing UPVC Coupler 110 mm dia.
40
13148
328.7
Cutting holes up to 30x30 cm in walls including making good the same: With With common burnt clay F.P.S. (non modular) bricks
12
3492
291.03
Cutting holes up to 15x15 cm in R.C.C. floors androofs for passing drain pipe etc. and repairing the hole after insertion of drain pipe etc. with cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size), including finishing complete so as to make it leak proof
54
17042
315.61
Providing and fixing UPVC pipes complete with fittings and clamps, including cutting and making good walls etc. (for wash basin & Urinal waste) 40 mm dia nominal bore
75
26718
356.25
Providing and fixing upvc hooper
90
17527
194.75
Providing and fixing M.S. holder bat clamps of approved design to C.I. or S.C.I. rain water pipes embedded in and including cement concrete blocks 10x10x10 cm of 1:2:4 mix (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) and cost of cutting holes and making good the walls etc. : 100mm dia pipe.
125
31670
253.36
Providing and fixing trap of self cleansing design with screwed down or hinged grating complete, including cost of cutting and making good the walls and floors : 110mm inlet & 110mm outlet.
18
19237
1068.75
Providing and fixin SWR PVC. 90° elbow with including fittings complete. 110mm
18
5540
307.8
Providing and fixing 45° elbow with including fittings complete. 110mm
18
5608
311.6
Providing and fixing SWR PVC T Band including fittings complete. 110x110x110mm
18
8772
487.35
Providing and fixing SWR PVC Y including fittings complete. 110x110x110mm
18
8379
465.5
Providing and fixing upvc vent Cowel. 110 mm
18
3762
209
Geyser capacity 25 L. Volume (L) 25 Rated Wattage 2 Kw Voltage / Frequency (V/Hz) 230V / 50Hz Temperature Range 25ºC to 75ºC Working Pressure(Mpa) 0.8 Inlet / Outlet Connection (Inch / mm) ½ " / 12.7mm Product Dimensions (WxDxH) 25Litres 560x370x390 mm
14
217667
15547.7
SUB HEAD - III - (WATER SUPPLY)
-
-
-
Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer in Charge.
-
-
-
15 mm dia nominal bore
200
69518
347.59
20 mm dia nominal bore
150
56307
375.38
Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes,having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer in Charge.
-
-
-
25 mm dia nominal bore
100
28038
280.38
32 mm dia nominal bore
75
27166
362.22
40 mm dia nominal bore
35
17179
490.84
Providing and fixing G.I. pipes complete with G.I. fittings and clamps, i/c cutting and making good the walls etc
-
-
-
15 mm dia nominal bore
100
25584
255.84
20 mm dia nominal bore
50
15267
305.35
25 mm dia nominal bore
125
48153
385.23
32 mm dia nominal bore
45
20958
465.74
40 mm dia nominal bore
50
28345
566.91
50 mm dia nominal bore
50
36600
732.01
Painting G.I. pipes and fittings with two coats of anti-corrosive bitumastic paint of approved quality :
-
-
-
15 mm dia nominal bore
100
1355
13.55
20 mm dia nominal bore
50
812
16.24
25 mm dia nominal bore
125
2640
21.12
32 mm dia nominal bore
60
1522
25.38
40 mm dia nominal bore
50
1489
29.78
50 mm dia nominal bore
50
1781
35.62
Providing & fixing full way lever operated forged brass ball valve of brass body with forged brass hard chrome plated steel ball tested to a pressure not less than 10 Kg / sqcm with threaded / flanged joints complete with nuts, bolts, gaskets, washers etc.
-
-
-
20 mm dia.
11
5486
498.75
25 mm dia.
24
18650
777.1
32 mm dia.
4
5130
1282.5
40 mm dia.
2
3712
1856.3
Providing and fixing motorised butterfly valve with float type sensors suitable for 240 volts with working pressure rating of not less than 5 kg/cm2 with control panel and sensors to open valve when water level is low in tanks and to close when water level is high in water tanks including necessary cables, conduits, upto junction box etc. complete. 32 mm dia.
2
49685
24842.5
Providing ,fixing, testing and commissioning butterfly valve of PN 1.6 rating with bronze / gunmetal seat duly ISI marked complete with nuts ,bolts,washers ,gaskets conforming IS 13095 of following size as required. 50 mm dia.
5
13210
2642.18
Providing and placing on terrace (at all floor levels) polyethylene water storage tank, IS: 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank.
-
-
-
25000 litre (1 Nos) Domestic
25000
192250
7.69
25000 litre (1 Nos) Fire
25000
192250
7.69
INTERNAL ELECTRIFICATION AND POWER WIRING
-
-
-
SUBHEAD I- WIRING POINTS
-
-
-
Wiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in surface / recessed medium class PVC conduit, with piano type switch, phenolic laminated sheet, suitable size M.S. box and earthing the point with 1.5 sq.mm. FRLS PVC insulated copper conductor single core cable etc. as required. Group C
466
490958
1053.56
Wiring for group controlled (looped) light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in surface / recessed midium class PVC conduit, with modular switch, modular plate, suitable GI box and earthing the point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable etc. as required. Group C
466
291520
625.58
Wiring for twin control light point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in surface / recessed medium class PVC conduit, 2 way modular switch, modular plate, suitable GI box and earthing the point with 1.5 sq.mm. FRLS PVC insulated copper conductor single core cable etc as required.
16
18221
1138.87
Wiring for light/ Power plug with 2X4 sq. mm FRLS PVC insuleted copper conductor single core cable in surface/ recessed medium class PVC conduit alongwith 1 Nos. 4 sq.mm FRLS PVC insulated copper conductor single core cable for loop earthing as required.
466
113480
243.52
Wiring for circuit/ submain wiring alongwith earth wire with the following sizes of FRLS PVC insulated copper conductor, single core cable in surface/ recessed medium class PVC conduit as required
-
-
-
2 x 2.5 sq.mm. + 1 x 2.5 sq.mm. earth wire
1150
230586
200.51
2 x 6 sq.mm. + 1 x 6 sq.mm. earth wire
100
32007
320.07
2 x 10 sq.mm. + 1 x 6 sq.mm. earth wire
10
4155
415.59
4 x 6 sq.mm. + 2 x 6 sq.mm. earth wire
20
10995
549.75
4 x 10 sq.mm. + 2 x 6 sq.mm. earth wire
450
329737
732.75
4 x 16 sq.mm. + 2 x 6 sq.mm. earth wire
150
149284
995.23
Supplying and fixing of following sizes of medium class PVC conduit along with accessories in surface/recess including cutting the wall and making good the same in case of recessed conduit as required. 25 mm
150
15858
105.72
Supplying and fixing two module stepped type electronic fan regulator on the existing modular plate switch box including connections but excluding modular plate etc. as required.
59
15873
269.04
Supplying and fixing modular blanking plate on the existing modular plate & switch box excluding modular plate as required.
20
583
29.17
Supplying and fixing following Modular base & cover plate on existing modular metal boxes etc. as required.
-
-
-
1 or 2 Module
15
1454
96.98
3 Module
45
4954
110.1
4 Module
20
2304
115.2
6 Module
50
6635
132.7
8 Module
20
3076
153.84
12 Module
15
2974
198.32
Supplying and fixing following modular switch / socket on existing modular plate and switch box including connections but excluding modular plate etc as required.
-
-
-
5/6 amps switch
124
9312
75.1
2 Way 5/6 amps switch
16
1726
107.91
15/16 amp switch
44
5004
113.74
3 pin 5/6 amp socket outlet
124
11029
88.95
6 pin 15/16 amp socket outlet
38
5457
143.63
Telephone socket outlet
2
215
107.91
TV antenna socket outlet
6
647
107.91
Supplying and fixing call bell/ buzzer suitable for single phase,
230 V, complete as required.
2
144
72.18
Supplying & fixing suitable size GI box wih modular plate and cover in front on surface or in recess including providing and fixing 25 A modular socket outlet and 25 A modular SP MCB, "C" curve including connections, painting etc. as required.
4
2120
530.06
Supplying and drawing telephone wire following pair 0.5 sqmm FR PVC insulated annealed copper conductor, unarmoured telephone cable in the existing surface/recessed steel/PVC conduit as required.
-
-
-
2 Pair
1200
33240
27.7
10 Pair
100
12350
123.5
Supplying and drawing of UTP 4 pair CAT 6 LAN Cable in the existing surface/ recessed Steel/ PVC conduit as required.
-
-
-
2 run of cable
50
3500
70
Installation, testing and commissioning of ceiling fan,including wiring the down rods of standard length (upto 30 cm) with 1.5sq. mm FRLS PVC insulated, copper conductor, single core cable, including providing and fixing phenolic laminated sheet cover on the fan box etc. as required.
59
11872
201.23
Installation of exhaust fan in the existing opening , including making good the damage, connection, testing commissioning etc. as required. Up to 450mm sweep
20
6562
328.1
Extra for fixing the louvers/ shutters complete with frame for a exhaust fan of all sizes.
20
3018
150.93
Supplying and drawing co-axial TV cable RG-6 grade, 0.7 mm solid copper conductor PE insulated, shielded with fine tinned copper braid and protected with PVC sheath in the existing surface/ recessed steel/ PVC conduit as required.
100
3427
34.27
SUBHEAD II-INSTALLATION OF LIGHT FIXTURES AND FANS
-
-
-
Supply, Installation, Testing and Commissioning of 1200 mm sweep, BEE 5 star rated, ceiling fan with Brush Less Direct Current (BLDC) Motor, class of insulation: B, 3 nos. blades, 30 cm long down rod, 2 nos. canopies, shackle kit, safety rope, copper winding, Power Factor not less than 0.9, Service Value (CMM/W) minimum 6.85, Air delivery minimum 215 CMM, 350 RPM (tolerance as per IS : 374- 2019), THD less than 10%, remote or electronic regulator unit for speed control and all remaining accessories including safety pin,nut bolts, washers, temperature rise=75 degree C (max.), insulation resistance more than 2 mega ohm, suitable for 230 V, 50 Hz, single phase AC Supply, earthing etc. complete as required. 1200 mm sweep ceiling fan
59
180593
3060.9
Installation ,Testing, Commissioning of wall bracket /ceiling fittings of all sizes and shapes containing upto two GLS/CFL/LED lamps per fitting, complete with all accessories including connections etc. as required.
387
33576
86.76
Supply of recess/Surface mounting round 12 watt, cut out Min 125mm, Height Min 40mm, LED Down Lighter having Powder coated die cast aluminium housing with heat sink, diffuser/ Reflector and driver set, suitable for 24Hr continuous Operation,complete in all respec.
84
118503
1410.75
Supply of LED Tube Light 40 watt Polycarbonate tube light complete including tube etc suitable for both wall & surface complete in all respects.
34
77907
2291.4
Supply of LED Tube Light 20 watt Polycarbonate tube light complete including tube etc suitable for both surface & surface complete in all respects.
171
187142
1094.4
Supply & Fixing wired decorative light on suitable for 18 Watt CFL with lamp complete in all respect.
78
68023
872.1
Suuply and fixing of 17 watt LED Mirror Light and complete in all respect.
20
17442
872.1
SUBHEAD III-DISTIBUTION BOARD
-
-
-
Supplying and fixing following way, horizontal type three pole and neutral, sheet steel, MCB distribution board, 415 V, on surface/ recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections, powder painted including earthing etc. as required. (But without MCB/RCCB/Isolator)
-
-
-
4 way Double door (4 + 12)
4
11931
2982.78
6 way Double door (4 + 18)
4
14506
3626.58
Supplying and fixing Cable End Box (Loose wire box)(IP 43) suitable for following triple pole and neutral, sheet steel, MCB distribution board, 415 V, on surface/ recess, complete with testing and commissioning etc. as required.
-
-
-
For 4 way, Double door TPN MCBDB
4
3149
787.44
For 6 way, Double door TPN MCBDB
4
3278
819.52
Supplying and fixing 5 amps to 32 amps rating, 240/415 volts, "C" curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required. Single pole
184
34345
186.66
Supplying and fixing 240/415 volts, "C" curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required.
-
-
-
63A 4P
4
12175
3043.8
40A 4P
4
12175
3043.8
Supplying and fixing single pole blanking plate in the existing MCB DB complete etc. as required.
34
322
9.48
SUBHEAD IV-EARTHING
-
-
-
Suplly and burring of safe Earthing Electrode T-39 Cu Copper Coated, Length 2000mm, outer pipe 76.3mm X 3.2 inner pipe 42.4mm X 2.6mm, terminal Dia 12mm, coating 80-100 micron filled with crystalline conductive mixture (CCM) having anti corrosive & conductive property with 50kgs activated soil (BFC) capable of reucing the soil resistivity with good mixture of retaining capacity along with 30cm square C.I. frame withhinged cover & mansonry housing.(From electrode terminal to switch board, cost of 25x3 copper strip will be extra) Make: As approved in U.P.P.W.D & C.P.R.I. all respects.
4
29275
7318.8
Providing and fixing 25 mm X 5 mm copper strip on surface or in recess for connections etc. as required.
4
3388
847.22
Providing and fixing 25 mm X 5 mm G.I. strip on surface or in recess for connections etc. as required.
40
7116
177.91
Providing and fixing 6 SWG dia G.I. wire on surface or in recess for loop earthing as required.
250
12757
51.03
SUBHEAD V-CABLES
-
-
-
Supplying following 1.1kV grade, heavy duty XLPE insulated, FRLS type armoured /Unarmured cables suitable for 415V, 50Hz, AC system, with inner and outer PVC sheath, outer sheath provided with FRLS insulation, galvanised steel armouring (round or flat as mentioned) and with all components as mentioned in BOQ, specifications and schedule, complete as required.
-
-
-
16 sqmm 4 core
100
33725
337.25
10 sqmm 4 core
35
10939
312.55
Supplying and making end termination with brass compression gland and aluminium lugs for following size of PVC insulated and PVC sheathed / XLPE aluminium conductor cable of 1.1 kV grade as required.
-
-
-
4 X 16 sq. mm (28mm)
4
901
225.29
4 X 10 sq. mm (25mm)
4
784
196.13
Laying and fixing of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 KV grade of following size on cable tray as required. Upto 35 sq. mm
250
8202
32.81
SUBHEAD VI -MISCELLANEOUS
-
-
-
Supply, Installation, Testing and Commissioning of 250mm size PVC exhaust fan suitable for 230V, 50 Hz AC including modifying and finishing for hole/opening for the size of fan, MS louver/ shutter complete with frame for Ex.fan including its connection with 3x1.5 sq mm FRLS copper conductor wire with PVC sleeve, loop earthing, making the good damage complete as required to do the job in all respect in accordance with laid specification or upto the satisfaction of engineer in charge.
20
56677
2833.85
S/f of 10 pair Telephone Tag Block for Floors and building with Krone connectors , with connection and punching of same
4
9781
2445.3
SUBHEAD VII-MAIN L. T. PANELS
-
-
-
LT PANEL
-
-
-
Design, Supply, installation, testing and commissioning of indoor/outdoor floor mounted/ wall mounted, IP43/IP65, IEC 61439/IS 8623, factory built, modular, sectionalised, compartmentalized, extendable type HT/LT cubicle panel of suitable size suitable for operation on 33/11/0.433/0.415 kV, 50 Hz AC 3 phase supply system fabricated from CRCA sheet steel of 2mm thick for frame work and covers, 3mm thick for gland plates with stiffeners wherever required, having vibration free structure chemically treated with seven tank process or better before painting for surface treatment and powder coated in approved shade, with suitable electrolytic grade high conductivity bus bars extensible, DMC/ SMC (whichever is superior) bus bar supports, with short circuit withstand capacity as mentioned ,bottom base channel of section not less than 100mmX 50mmX 5 mm thick, fabrication shall be done in transportable sections, entire panel shall have a common earth bar of required size at the rear with 2 Nos. earth stud, connections and interconnection with solid conductor wires / copper strips, neutral links, control wiring with 1.5 sqmm. & 2.5sqmm. PVC insulated FRLS copper conductor S/C cable for voltage & current respectively, including providing and fixing following switch gears as per SLD ,technical specifications etc.complete in all respect so as to fulfill all as required.
-
-
-
LT Panel
-
-
-
The minimum clearances between bus bars shall be as follows :
-
-
-
Phase to phase - minimum 20mm
-
-
-
Phase to neutral-minimum 15mm
-
-
-
Incoming :
-
-
-
1Nos 250 Amp. 4P MCCB of 36kA Breaking capacity
-
-
-
Metering :
-
-
-
1 Set of CT's one of 250/ 5Amp ratio for Multifunction Meter
-
-
-
1 Set of CT's one of 250/ 5Amp ratio 50/51/86/95
-
-
-
1 Nos. Set of Phase Indication Lamp.
-
-
-
1 Nos. of class-III Type SPD
-
-
-
Bus Bar :
-
-
-
400 Amp.TPN aluminimum bus bar of suitable length.50KA
-
-
-
Outgoing :
-
-
-
Phase indication lamps on each outgoing to be provided.
-
-
-
01 No.63 Amp 4P MCCB. (25 KA)
-
-
-
02 No.63 Amp 4P MCB. (10 KA)
-
-
-
10 No.40 Amp 4P MCB. (10 KA)
-
-
-
Panel described as above
1
272175
272175
SUBHEAD VIII-CABLE TRAY & RACEWAY
-
-
-
Supplying and installing following size of perforated Hot Dipped Galvanised Iron cable tray (Galvanisation thickness not less than 50 microns) with perforation not more than 17.5%, in convenient sections, joined with connectors, suspended from the ceiling with G.I. suspenders including G.I. bolts & nuts, etc. as required. 100 mm wide x 50 mm depth x 1.6 mm thickness.
20
9755
487.78
FIRE FIGHTING SYSTEM
-
-
-
SUBHEAD-I FIRE HYDRANT SYSTEM
-
-
-
Supplying, installation, testing and commissioning of electric driven terrace pump suitable for automatic operation and consisting of following, complete in all respects, as required: (Terrace Pump) (a)Horizontal type, multistage, centrifugal, split casing pump of cast iron body & bronze impeller with stainless steel shaft, mechanical confirming to IS : 1520 b) Suitable HP squirell cage induction motor TEFC type suitable for operation on 415 volts, 3 phase, 50 Hz, AC supply with IP55 class of protection for enclosure, horiziontal foot mounted type with Class-'F' insulation, conforming to IS-325. (c) M.S.fabricated common base plate, coupling, coupling guard, foundation bolts etc.as required. (d) Suitable cement concrete foundation duly plastered and with anti vibration pads. 450 lpm at 35 m Head
1
62851
62851.28
Providing and fixing in position the industrial type pressure gauges with gun metal / brass valves complete as required
1
872
872.01
Air Release Valve, Gunmetal, having rubber ball with 1” (25mm) BSP Male threaded inlet
1
1298
1298.65
Supplying and fixing air vessel made of 250 mm dia, 8 mm thick MS sheet, 1200 mm in height with air release valve on top and flanged connection to riser, drain arrangement with 25 mm dia gun metal wheel valve with required accessories, pressure gauge and paintingwith synthetic enamel paint of approved shade as required.
1
13301
13301.84
Providing, laying, of 'C' class heavy duty MS pipe conforming to IS 3589/IS 1239 including Welding, fittings like elbows, tees, flanges, tapers, nuts bolts, gaskets etc. and fixing the pipe on the wall/ceiling with suitable clamp/support frame and painting with two or more coats of synthetic enamel paint of required shade complete as required : 100 mm dia
125
232858
1862.87
Supplying, fixing, testing and commissioning of butterfly valve of PN 1.6 rating with bronze/gunmetal seat duly ISI marked complete with nuts, bolts, washers, gaskets conforming to IS 13095 of following sizes as required : 100 mm dia
1
4860
4860.96
Providing, installation, testing and commissioning of non-return valve of following sizes confirming to IS: 5312 complete with rubber gasket, GI bolts, nuts, washers etc.as required : 100mm dia
1
8056
8056.64
Supplying and fixing orifice plate made out of 6 mm thick stainless steel (Grade 304) with orifice of required size to be fitted between flange & landing valve of external and internal hydrants to reduce pressure at the outlet to the level of 3.5 kg/cm2 complete as required.
2
1926
963.15
INTERNAL HYDRANT
-
-
-
Supplying and fixing first-aid Hose Reel with MS construction spray painted in post office red, conforming to IS 884 complete with the following as required. 20 mm nominal internal dia water hose thermoplastic (Textile reinforced) type -2 as per IS: 12585 20 mm nominal internal dia gun metal globe valve & nozzle.Drum and brackets for fixing the equipmets on wall. Connections from riser with 25 mm dia stop gun metal valve & M.S. Pipe and socket. 30 m
4
25300
6325.01
Supplying & fixing 63 mm dia gun metal short branch pipe with 20 mm nominal internal diameter size nozzle conforming to IS 903 suitable for instantaneous connection to interconnect hose pipe coupling as required : Gun metal
4
7046
1761.53
Fireman Axe-made of carbon steel with rubber insulated handle tested to 20,000 Volts as per IS:926 Make: NEWAGE
4
4126
1031.7
Fire shaft door fabricated out of M.S. sheet and frame, door size of 1200 (W) x 2100 (h) with 4 mm thick glass, suitable Rubber beading and Locking arrangement and complete door shall be powder coated with red color powder coating
4
51053
12763.25
Supplying and fixing of fire brigade connection of cast iron body with gun metal male instantaneous inlet couplings complete with cap and chain as reqd. for suitable dia MS pipe connection conforming to IS 904 as required : 2 way-100 mm dia M.S. Pipe
1
4915
4915.64
SUBHEAD-II : FIRE EXTINGUSHER
-
-
-
Providing, storing, handling, shifting, installation, testing and commissioning of halon free portable fire Extinguishers as described below: Co2 type Fire Extinguisher 4.5 Kgs. Capacity, made from brand new seamless cylinder, as per IS: 7285 and CCE approval, fitted with Discharge hose and horn and wheel type valve with initial Charge as per IS: 15683:2018 specification, bearing ISI Mark & EIL approved. Make: SAFEX Capacity 4.5KG
8
58725
7340.65
Providing and fixing of ABC Power type fire extinguishers consisting of welded M.S. cylindrical body, squeeze lever discharge valve fitted with pressure indicating gauge internal discharge tube 30 cm long high pressure discharge hose, discharge nozzle, suspension bracket. Conforming to IS: 15683 finished externally with red enamel paint fixed to wall with brackets complete with internal charge. Capacity 6KG
8
30795
3849.4
Providing and fixing Fire related signages printed on photoluminescent U1000 aluminium sheet of 1.0 mm (+-10%) containing Lumigen II as base chemical, covered under UV stablized coating and of appropriate size including fixing on wall, door, ceiling etc. with proper clamps, hangers, cleats, anchor fasteners etc. complete in all respects as directed by Engineer-in-charge.
8
4658
582.35
SUBHEAD-III : FIRE CONTROL PANELS
-
-
-
Supply installation, testing and commissioning of approved make DOL starter 7.5 hp, 3 phase, 50 Hz, 415V, i/c single phase preventer, incoming MCB 32A 4P, 10KA , in outdoor type enclosure, connections, as required as per specifications.
1
6713
6713.65
Copper Power Cables, Solid Copper Conductor upto 6 sq. mm & Balance Stranded Copper, XLPE Insulated, Cores Laid Up, PVC Innersheathed, Unarmoured/Armoured (Glavanised wire for cables up to 10x1.5 sq. mm, 8x2.5 sq. mm, 2x10 sq. mm, 3x10 sq. mm, 4x6 sq.
mm & balance all galvanised steel strip), Extruded PVC Type ST2 Outer Sheathed, 650/1100 V Grade as per IS 7098 4 Core X 10 sqmm. Aluminium Armoured
71
67989
957.6
Supplying and making end termination with brass double compression gland and aluminium lugs for following size of XLPE insulated and PVC sheathed / XLPE aluminium conductor cable of 1.1 KV grade as required. It should be complete as per specifications & directions of Engineer-in-charge. 4 Core X 10 sqmm. Aluminium Armoured
4
784
196.13
Supplying and drawing following sizes of FRLS PVC insulated copper conductor, single core cable in the existing surface/ recessed steel/ PVC conduit as required
-
-
-
6 C x 2.5 Sqmm
25
4830
193.21
2 C x 2.5 Sqmm
25
1786
71.45
Supplying and fixing of following sizes of steel conduit along with accessories in surface/recess including painting in case of surface conduit, or cutting the wall and making good the same in case of recessed conduit as required.
-
-
-
25 mm Conduit
25
4666
186.66
32 mm Conduit
45
10696
237.69
Supplying and installing following size of perforated pre-painted M.S. cable trays with perforation not more than 17.5%, in convenient sections, joined with connectors, suspended from the ceiling with M.S. suspenders including bolts & nuts, painting suspenders etc as required. 150 mm width x 50mm depth x 1.6 mm thickness.
20
8807
440.38
Supplying and fixing of Self Glow Exit signage for stairs and exits size 100 x 300. Make :- Rcube Fire Protection Services Pvt. Ltd. /R.K. Engineers Services. CE Certified, ISO 13485:2016 & OHSAS 18001:2007 Approved..or eq
16
41800
2612.5
(C) EXTERNAL ELECTRICAL (BOY'S HOSTEL)
-
-
-
SUBHEAD I-EARTHING AND LOOP EARTHING
-
-
-
Supply and burring of Safe Earthing Electrode T-19 (Hot Dip Galvanized), Length up to 2000mm, outer pipe 50mm, inner pipe 25, terminal Dia 12 mm, outer GI pipe of 16 swg and inner GI pipe of 12 swg with Hot Dip
Galvanization up to 100 micron filled with crystalline conductive mixture (CCM) having anti corrosive & conductive property with 50 kgs activated soil (BFC) capable of reducing the soil resistivity with good mixture of retaining capacity along with 30cm square C.I. frame with hinged cover & masonry husing.
2
6087
3043.8
Supply and burring of Safe Earthing Electrode T-39 AAlloy Coated, Length 3000mm, outer pipe 76.3mm x 3.2 inner pipe 42.4mm x 2.6mm, terminal Dia 12mm, coating 80-100 micron filled with crystalline conductive mixture (CCM) having anti corrosive & conductive property with 50 kgs activated soil (BFC) capable of reducing the soil resistivity with good mixture of retaining capacity along with 30 cm square C.I. frame with hinged cover & masonry housing.d.
2
19767
9883.8
Providing and fixing 25 mm X 5 mm G.I. strip on surface or in recess for connections etc. as required.
90
16011
177.91
Providing and fixing 6 SWG dia G.I. wire on surface or in recess for loop earthing as required.
450
22963
51.03
SUBHEAD II-EXTERNAL LIGHTING
-
-
-
Supply & fixing of 7 mtr GI Octagonal Pole of approved make (top dia 70mm, Bottom dia 130 mm and base plate 12 mm thik) having 3mm thikness with Single arm bracket (1 Mtr length) on RCC foundation including the cost of foundation, foundation bolts, excavation & back filling and Required T&P complete in all respect.
10
127908
12790.8
Supply and fixing of LED street light fitting having die cast aluminium body and diffuser with driver set suitable for 45 watt to 50 watt. Confirming to IP 66 and above protection complete in all respect.
10
47538
4753.8
Supply and fixing of 20 Amp DP MCB (10KA) (C curve) for poles
10
2137
213.75
Supply and fixing of Bakelite sheet 3 mm thick of suitable size & connector
10
2223
222.3
SUBHEAD III-CABLES
-
-
-
Supplying following 1.1kV grade, heavy duty XLPE insulated, FRLS type armoured /Unarmured cables suitable for 415V, 50Hz, AC system, with inner and outer PVC sheath, outer sheath provided with FRLS insulation, galvanised steel armouring (round or flat as mentioned) and with all components as mentioned in BOQ, specifications and schedule, complete as required.
-
-
-
4C x 16 sqmm aluminium conductor, 2XWY.
20
3591
179.55
4C x 10 sqmm aluminium conductor, 2XWY.
20
1615
80.75
2C x 16 sqmm aluminium conductor, 2XWY.
40
2850
71.25
2C x 10 sqmm aluminium conductor, A2XWY.
250
15437
61.75
2C x 6 sqmm aluminium conductor, A2XWY.
200
10450
52.25
Supplying following 1.1kV grade, XLPE insulated, FRLS type control cables,suitable for 415V, 50Hz, AC system, with inner and outer PVC sheath, outer sheath provided with FRLS insulation and with all components as mentioned in BOQ, specifications and schedule, complete as required.
-
-
-
2C X 2.5 sqmm copper conductor
4
273
68.4
4C X 2.5 sqmm copper conductor
4
410
102.6
6C X 2.5 sqmm copper conductor
4
532
133
Laying and fixing of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 KV grade of following size on cable tray as required. Upto 35 sq. mm (clamped with 1mm thick saddle)
542
23170
42.75
Supplying and making end termination with brass compression gland and copper lugs for following size of PVC insulated and PVC sheathed / XLPE aluminium conductor cable of 1.1 kV grade as required.
-
-
-
4 X 16 sq. mm (28mm)
4
901
225.29
4 X 10 sq. mm (25mm)
4
784
196.13
2 X 16 sq. mm (22mm)
4
746
186.65
2 X 10 sq. mm (19mm)
4
702
175.71
2 X 6 sq. mm (19mm)
8
1399
174.99
2C X 2.5 sqmm copper conductor (19mm)
4
319
79.8
4C X 2.5 sqmm copper conductor (19mm)
4
319
79.8
6C X 2.5 sqmm copper conductor (19mm)
4
319
79.8
SUBHEAD IV-CIVIL WORKS
-
-
-
Providing, laying and fixing following dia RCC pipe NP2 class (light duty) in ground complete with RCC collars, jointing with cement mortar 1:2 (1 cement : 2 fine sand) including trenching (75 cm deep) and refilling etc as required.
-
-
-
100 mm dia
15
7240
482.67
150 mm dia
90
47508
527.87
250 mm dia
30
21326
710.88
Making of following size of Cable Chamber made of 230 mm thick brick work in cement mortar (1 cement : 6 sand) with PCC 100 mm thick PCC base plastering of inner and outer surface with cement mortar including providing of Heavy Duty C.I Cover complete with digging, refilling and removal of surplus soil complete as required.
-
-
-
900 mm x 800 mm x 1000 mm deep
1
5780
5780.75
600 mm x 600 mm x 800 mm deep
5
22828
4565.7
SUBHEAD V-MAIN L. T. PANELS
-
-
-
SITC OF MAIN PANEL FEEDER PILLAR
-
-
-
Design, Supply, installation, testing and commissioning of indoor/outdoor floor mounted/ wall mounted, IP43/IP65, IEC 61439/IS 8623, factory built, modular, sectionalised, compartmentalized, extendable type HT/LT cubicle panel of suitable size suitable for operation on 33/11/0.433/0.415 kV, 50 Hz AC 3 phase supply system fabricated from CRCA sheet steel of 2mm thick for frame work and covers, 3mm thick for gland plates with stiffeners wherever required, having vibration free structure chemically treated with seven tank process or better before painting for surface treatment and powder coated in approved shade, with suitable electrolytic grade high conductivity bus bars extensible, DMC/ SMC (whichever is superior) bus bar supports, with short circuit withstand capacity as mentioned ,bottom base channel of section not less than 100mmX 50mmX 5 mm thick, fabrication shall be done in transportable sections, entire panel shall have a common earth bar of required size at the rear with 2 Nos. earth stud, connections and interconnection with solid conductor wires / copper strips, neutral links, control wiring with 1.5 sqmm. & 2.5sqmm. PVC insulated FRLS copper conductor S/C cable for voltage & current respectively, including providing and fixing following switch gears as per SLD ,technical specifications etc.complete in all respect so as to fulfill all as required.
-
-
-
FP Outdoor Type(IP 65)
-
-
-
Incoming :
-
-
-
One (1) No 400 Amp. 4P MCCB of 36KA Breaking capacity
-
-
-
Metering :
-
-
-
Multifunction Meter
-
-
-
One (1) Set of Phase Indication Lamp.
-
-
-
Bus Bar :
-
-
-
One (1) No. 500 Amp.TPN aluminimum bus bar of suitable length.
-
-
-
Outgoing :
-
-
-
Phase indication lamps on each outgoing to be provided.
-
-
-
32Amp SP MCB (10kA) - 3 Nos.
-
-
-
32Amp SP MCB (10kA) - 1 No. Spare
-
-
-
Panel described as above
1
40527
40527
(D) EXTERNAL PLUMBING (BOY'S HOSTEL)
-
-
-
SCHEDULE OF QUANTITIES FOR EXTERNAL SEWERAGE SYSTEM - I
-
-
-
Excavating trenches in all kind of soil of required width for pipes, cables etc. including excavation for sockets and dressing of sides, ramming of bottoms, depth upto 1.5 m. including getting out the excavated soil & then returning the soil as required, in layers not exceeding 20cm in depth including consolidating each deposited layer by ramming, watering, etc & disposig of surplus excavated soil as directed within a lead of 50m. Pipes 80mm to 300mm diameter.
175
26346
150.55
Providing, laying and joining glazed stone ware pipes grade 'A' with stiff mixture of cement mortar in the proportion of 1:1 (1 cement : 1 fine sand) including testing of joints etc. complete. 150mm diameter
150
72876
485.84
Providing & laying cement concrete 1:5:10 (1 cement :5 coarse sand :10 graded stone aggregate 40mm nominal size) alround S.W. Pipes including bed concrete as per standard design. 150mm diameter S.W. Pipe
25
20595
823.83
Constructing brick masonry manhole in cement mortar 1:4 (1 cement :4 coarse sand) RCC top slab with 1:2:4 mix (1 cement :2 coarse sand :4 graded stone aggregate 20mm nominal size), foundation concrete 1:4:8 mix (1 cement :4 coarse sand :8 graded stone aggregate 40mm nominal size) inside plastering 12mm thick with cement mortar 1:3 (1 cement :3 coarse sand) finished with floating coat fo neat cement and making channels in cement concrete 1:2:4 (1 cement :2 coarse sand :4 graded stone aggregate 20mm nminal size) finished with a floating coat of neat cement complete as per standard design Inside size 90x80cms and 45cms deep including CI cover with frame (light duty) 455x610mm internal diamensions total weight of cover and frame to be not less than 38 kg (weight of cover 23 kg and weight of frame 15kg). With FPS bricks of class designation 75
-
-
-
(i) For Sewer Line
10
89170
8917.03
Extra for depth of man hole size 90x80 cm
10
61623
6162.34
Providing orange colour safety foot rest of minimum 6mm thick plastic encapsulated as per IS : 10910 on 12mm dia steel bar conforming to IS: 1786 having minimum cross section as 23 mm x25mm and over all minimum length 263mm and width as 165mm with minimum 112mm space between protruded legs having 2mm tread on top surface by ribbing or chequering besides necessary and adequate anchoring projections on tail length on 138 mm as per standard drawing and suitable to with stand the bend test and chemical resistance test as per specifications and having manufactures's permanent identification mark to be visible even after fixing, including fixing in manholes with 30x20x15 cm cement concrete block 1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 20mm nominal size) complete as per design.
30
11598
386.62
EXTERNAL WATER SUPPLY SYSTEM -II
-
-
-
Excavating trenches in all kind of soil of required width for pipes, cables etc. including excavation for sockets and dressing of sides, ramming of bottoms, depth upto 1.5 m. including getting out the excavated soil & then returning the soil as required, in layers not exceeding 20cm in depth including consolidating each deposited layer by ramming, watering, etc & disposig of surplus excavated soil as directed within a lead of 50m. Pipes 80mm to 300mm diameter.
200
30110
150.55
Providing & fixing G.I. pipes complete with G.I. fittings including tenching and refilling etc. (external work)
-
-
-
a) 50mm nominal bore.
120
63860
532.17
b) 32mm nominal bore.
40
15090
377.26
c) 25mm nominal bore.
40
13064
326.61
Providing & fixing sand of grading zone V or coaser grade alround the G.I. Pipes in external work.
-
-
-
a) 50mm nominal bore.
65
7863
120.97
b) 32mm nominal bore.
75
8635
115.14
c) 25mm nominal bore.
75
8415
112.2
Providing and fixing gate valve (with cap complete with bolts, nuts, rubber insertion etc.
-
-
-
a) 50mm
2
1433
716.86
b) 32mm
2
963
481.52
c) 25mm
2
869
434.59
Constructing masonry Chamber 60x60x75 cm, inside with 75 class designation brick work in cement mortar 1:4 (1 cement :4 coarse sand ) for sluice valve, with C.I. surface box 100mm top diameter, 160mm bottom diameter and 180mm deep (inside) with chained lid and RCC top slab 1:2:4 mix (1 cement : 2 coarse sand : 4 graded stone aggregate 20mm nominal size) necessary excavation foundation concrete 1:5:10 (1 cement : 5 fine sand : 10 graded stone aggregate 40mm nominal size) and inside plastering with cement mortar 1:3 (1 cement : 3 coarse sand) 12 mm thick finished with a floating coat of neat cement complete as per standard design : With F.P.S. bricks
30
227540
7584.67
DRAINS -III
-
-
-
Constructing brick masonry open surface drain with bricks of class designation 75 in cement mortar 1:4 (1 cement : 4 fine sand) including earth excavation, 10cm thick bed concrete 1:5:10 (1 cement : 5 fine sand : 10 graded stone aggregate 40mm nominal size) and 25mm thick cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 12.5mm nominal size) for filling haunches including 12mm cement plaster 1:4 (1 cement : 4 coarse sand ) with a floating coat of neat cement inside the drain, its top and exposed side including disposal of surplus earth complete as per standard design: 30cm drain 45cm average depth
155
307416
1983.33
(E) RAIN WATER HARVESTING (BOY'S HOSTEL)
-
-
-
Earth work in excavation by mechanical means (Hydraulic excavatior)/manual means over areas(exceeding 30cm in depth. 1.5m in width as well as 10sqm on plan) including disposal of excavated earth, lead upto 50m and lift upto 1.5m, disposed earth to be levelled and neatly dressed.
-
-
-
In all kind of soil upto 1.5m depth
32.07
3974
123.94
In all kind of soil upto 1.5m to 3.0m. depth
32.07
6814
212.48
In all kind of soil upto 3.0m to 4.5m. depth
25.58
9964
389.56
Providing and laying in position cement concrete of specified grade excluding the ccost of centering and shuttering -All work up to plinth level: 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20mm nominal size).
1.6
8801
5501.17
Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in foundation and plinth in: Cement mortar 1:4 (1 cement : 4 coarse sand)
33.25
158152
4756.48
Reinforced cement concrete work inbeams, suspended floors, roofs having slope up to 15º landings, balconies, shelves, chajjas, intels, bands plain window sills, staircases and spiral stair cases up to floor five level excluding the cost of centering, shuttering, finishing and reinforcement with 1:2:4 (1 cement :2 coarse sand :4 graded stone aggregate 20mm nominal size)
2.14
14202
6636.69
Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete upto plinth level. Mild steel and Medium Tnsile steel bars.
168
12652
75.31
15 mm cement plaster on rough side of single or half brick wall mix 1:3 (1 cement : 3 coarse sand)
74.78
26451
353.73
Providing M.S. foot rests including fixing in manoholes with 20x20x10 cm cement concrete blocks 1:3:6 (1cement : 3 coarse sand : 6 graded stone aggregate 20mm nominal size) as per standard design: With 20x20mm square bar
24
9127
380.33
Providing and fixing in position precast RCC manhole cover and frame of required shape and approved quality. M.D. -10- Circular shape 500mm internal diameter
4
3275
818.77
Boring/drilling bore well of required dia for casing/ strainer pipe, by suitable method prescribed in IS: 2800 (part I), including collecting samples from different strata, preparing and submitting strata chart/bore log, including hire & running charges of all equipments, tools, plants & machineries required for the job, all complete as per direction of Engineer-incharge, upto 90 metre depth below ground level. Drilling of 300mm dia bore hole manually.
50
24709
494.19
Supplying, assembling, lowering and fixing in vertical position in bore well unplasticized PVC medium well screen (RMS) pipes with ribs, conforming to IS: 12818, including hire & labour charges, fittings & accessories etc. all complete, for all depths, as per direction of Engineer-in-charge. 150 mm nominal size dia
50
28190
563.81
Supplying, filling, spreading & leveling stone boulders of size range 5 cm to 20cm, in recharge pit, in the required thickness, for all leads & lifts, all complete as per direction of Engineer-in-charge.
7.07
7453
1054.22
Supplying, filling, spreading & leveling gravels of size range 5 mm to 10mm, in the recharge pit, over the existing layer of boulders, in required thickness, for all leads & lifts, all complete as per direction of Engineer-in-charge.
7.07
7593
1074.08
Supplying, filling, spreading & leveling coarase sand of size range 1.5 mm to 2mm in recharge pit, in required thickness over gravel layer, for all leads & lifts, all complete as per direction of Engineer-in-charge.
7.07
7593
1074.08
Gravel packing in tubewell construction in accordance with IS: 4097, including providing gravel fine/medium/coarse, in required grading & size as per actual requirement, all complete as per direction of Engineer-in-charge.
2
2827
1413.61
EXTERNAL PIPE NETWORK SYSTEM
-
-
-
Excavating trenches in all kind of soil of required width for pipes, cables etc. including excavation for sockets and dressing of sides, ramming of bottoms, depth upto 1.5 m. including getting out the excavated soil & then returning the soil as required, in layers not exceeding 20cm in depth including consolidating each deposited layer by ramming, watering, etc & disposig of surplus excavated soil as directed within a lead of 50m. Pipes 80mm to 300mm diameter.
200
49178
245.89
Providing, laying and joining glazed stone ware pipes grade 'A' with stiff mixture of cement mortar in the proportion of 1:1 (1 cement : 1 fine sand) including testing of joints etc. complete.
-
-
-
a) 150mm diameter S.W. Pipe
175
85022
485.84
b) 200mm diameter S.W. Pipe
25
16938
677.55
Providing & laying cement concrete 1:5:10 (1 cement :5 coarse sand :10 graded stone aggregate 40mm nominal size) upto haunches of S.W. Pipes including bed concrete as per standard design.
-
-
-
a) 150mm diameter S.W. Pipe
175
90802
518.87
b) 200mm diameter S.W. Pipe
25
15248
609.92
Constructing brick masonry manhole with 75 class designation F.P.S. bricks in cement mortar 1:4 (1 cement : 4 coarse sand) RCC top slab with 1:2:4 mix (1 cement : 2 coarse sand: 4graded stone aggregate 20mm nominal size); foundation concrete 1:4:8 mix (1 cement :4 coarse sand: 8 graded stone aggregate 40mm nominal size) inside plasstering 12mm thick with cement mortar 1:3 (1 cement :3 coarse sand) finished with a floating coat of neat cement and making channels in cement concrete 1:2:4 (1 cement :2 coarse sand : 4 graded stone aggregate 20mm nominal size) finished with a floating coat of neat cement complete as per standard design. a) Inside size 60x60 cm & 90 cm deep including C.I. cover with frame (light duty) total wt. of cover & frame to be not less than 38 Kg (wt. of cover 23 Kg & wt. of frame 15 Kg.
25
156182
6247.29
(F) SEPTIC TANK & SOAK PIT-100 USERS (BOY'S HOSTEL)
-
-
-
Size :- Length = 7.50 M. Width = 2.65M Total Depth =3.00M
-
-
-
Earth work in excavation over areas including disposal of excavated earth, lead upto 50m, disposed earth to be levelled and neatly dressed.
-
-
-
In all kind of soil upto 1.5m depth
37.13
4601
123.94
In all kind of soil upto 1.5m to 3.0m. depth
39.61
8416
212.48
Providing and laying of cement concrete in base excluding the cost of centring and shuttering by 1:2:4 (1 cement : 2 coarse sand : 4 gradded stone aggregae 20mm nominal size)
2.48
13642
5501.17
Brick work with brick of class designation 150 in foundation and plinth in cement mortar (1 cement : 4 coarse sand)
18.48
95108
5146.56
Reinforced cement concrete work in slab with 1:1.5:3 (1 cement : 1.5 course sand : 3 graded stone aggregate 20mm normal size).
2.29
18397
8033.71
Reinforcement for R.C.C. work including, straightening, cutting bending binding and placing in position complete.
180
13460
74.78
Centring and shuttering including struting , proping etc and removal of form for slab.
22.92
14839
647.45
15mm cement plaster on rough side of mix 1:4 (1 cement : 4 course sand)
80.33
23095
287.51
Providing M.S. foot rest including fixing with 20x20x10 cm. cement concrete block 1:3:6 (1 cement : 3 coarse sand : 6 gradded aggregate of nominal size 20mm ) as per standard design with 20x20mm sq bars.
12
4563
380.33
Providing and fixing C.I. tee at the inlet and outlet of septic tank.
2
1179
589.95
Providing & fixing 75mm dia vent pipes.
1
729
729.5
Providing & fixing of 75mm dia cast iron terminal guard.
1
237
237.89
Providing and fixing in position precast RCC manhole cover and frame of required shape and approved quality.
-
-
-
M.D. -10- Circular shape 500mm internal diameter
2
1637
818.77
L.D. -2.5- Circular shape 450mm internal diameter
4
3266
816.71
Making soak pit 2.5 m diameter 3.0 metre deep with 45 x 45 cm dry brick honey comb shaft with bricks of class designation 75 and S.W. drain pipe 100 mm diameter, 1.8m long complete as per standard design. With F.P.S. bricks
1
18756
18756.33
(G) SEPTIC TANK & SOAK PIT-50 USERS (BOY'S HOSTEL)
-
-
-
Septic Tank(Size :- Length = 5.0 M. Width = 2.00M Total Depth =3.00M)
-
-
-
Earth work in excavation over areas including disposal of excavated earth, lead upto 50m, disposed earth to be levelled and neatly dressed.
-
-
-
In all kind of soil upto 1.5m depth
20.15
2497
123.94
In all kind of soil upto 1.5m to 3.0m. depth
21.49
4566
212.48
Providing and laying of cement concrete in base excluding the cost of centring and shuttering by 1:2:4 (1 cement : 2 coarse sand : 4 gradded stone aggregae 20 mm nominal size)
1.34
7371
5501.17
Brick work with brick of class designation 150 in foundation and plinth in cement mortar (1 cement : 4 coarse sand)
13.29
68397
5146.56
Reinforced cement concrete work in slab with 1:2:4 (1 cement : 2 course sand : 4 graded stone aggregate 20mm normal size).
1.22
9801
8033.71
Reinforcement for R.C.C. work including, straightening, cutting bending binding and placing in position complete.
95.6
7148
74.78
Centring and shuttering including struting , proping etc and removal of form for slab.
12.18
7885
647.45
12 mm cement plaster on rough side of single or half brick wall mix 1:3 (1 cement : 3 coarse sand)
57.79
16615
287.51
Providing M.S. foot rest including fixing with 20x20x10 cm. cement concrete block 1:3:6 (1 cement : 3 coarse sand : 6 gradded aggregate of nominal size 20mm ) as per standard design with 20x20mm sq bars.
12
4563
380.33
Providing and fixing C.I. tee at the inlet and outlet of septic tank.
2
1179
589.95
Providing & fixing 75mm dia vent pipes.
1
729
729.5
Providing & fixing of 75mm dia cast iron terminal guard.
1
237
237.89
Providing and fixing in position precast RCC manhole cover and frame of required shape and approved quality.
-
-
-
M.D. -10- Circular shape 500mm internal diameter
2
1637
818.77
M.D. -2.5- Circular shape 450mm internal diameter
4
3266
816.71
Making soak pit 2.5 m diameter 3.0 metre deep with 45 x 45 cm dry brick honey comb shaft with bricks of class designation 75 and S.W. drain pipe 100 mm diameter, 1.8m long complete as per standard design. With F.P.S. bricks
1
18756
18756.33
(H) EXTERNAL ELECTRICAL (GIRL'S HOSTEL)
-
-
-
SUBHEAD I-EARTHING AND LOOP EARTHING
-
-
-
Supply and burring of Safe Earthing Electrode T-19 (Hot Dip Galvanized), Length up to 2000mm, outer pipe 50mm, inner pipe 25, terminal Dia 12 mm, outer GI pipe of 16 swg and inner GI pipe of 12 swg with Hot Dip
Galvanization up to 100 micron filled with crystalline conductive mixture (CCM) having anti corrosive & conductive property with 50 kgs activated soil (BFC) capable of reducing the soil resistivity with good mixture of retaining capacity along with 30cm square C.I. frame with hinged cover & masonry husing.
2
6087
3043.8
Supply and burring of Safe Earthing Electrode T-39 AAlloy Coated, Length 3000mm, outer pipe 76.3mm x 3.2 inner pipe 42.4mm x 2.6mm, terminal Dia 12mm, coating 80-100 micron filled with crystalline conductive mixture (CCM) having anti corrosive & conductive property with 50 kgs activated soil (BFC) capable of reducing the soil resistivity with good mixture of retaining capacity along with 30 cm square C.I. frame with hinged cover & masonry housing.d.
2
19767
9883.8
Providing and fixing 25 mm X 5 mm G.I. strip on surface or in recess for connections etc. as required.
60
10674
177.91
Providing and fixing 6 SWG dia G.I. wire on surface or in recess for loop earthing as required.
250
12757
51.03
SUBHEAD II-EXTERNAL LIGHTING
-
-
-
Supply & fixing of 7 mtr GI Octagonal Pole of approved make (top dia 70mm, Bottom dia 130 mm and base plate 12 mm thik) having 3mm thikness with Single arm bracket (1 Mtr length) on RCC foundation including the cost of foundation, foundation bolts, excavation & back filling and Required T&P complete in all respect.
6
76744
12790.8
Supply and fixing of LED street light fitting having die cast aluminium body and diffuser with driver set suitable for 45 watt to 50 watt. Confirming to IP 66 and above protection complete in all respect.
6
28522
4753.8
Supply and fixing of 20 Amp DP MCB (10KA) (C curve) for poles
6
1282
213.75
Supply and fixing of Bakelite sheet 3 mm thick of suitable size & connector
6
1333
222.3
SUBHEAD III-CABLES
-
-
-
Supplying following 1.1kV grade, heavy duty XLPE insulated, FRLS type armoured /Unarmured cables suitable for 415V, 50Hz, AC system, with inner and outer PVC sheath, outer sheath provided with FRLS insulation, galvanised steel armouring (round or flat as mentioned) and with all components as mentioned in BOQ, specifications and schedule, complete as required.
-
-
-
4C x 16 sqmm aluminium conductor, 2XWY.
10
1795
179.55
4C x 10 sqmm aluminium conductor, 2XWY.
10
807
80.75
2C x 16 sqmm aluminium conductor, 2XWY.
20
1425
71.25
2C x 10 sqmm aluminium conductor, A2XWY.
125
7718
61.75
2C x 6 sqmm aluminium conductor, A2XWY.
150
7837
52.25
Supplying following 1.1kV grade, XLPE insulated, FRLS type control cables,suitable for 415V, 50Hz, AC system, with inner and outer PVC sheath, outer sheath provided with FRLS insulation and with all components as mentioned in BOQ, specifications and schedule, complete as required.
-
-
-
2C X 2.5 sqmm copper conductor
2
136
68.4
4C X 2.5 sqmm copper conductor
2
205
102.6
6C X 2.5 sqmm copper conductor
2
266
133
Laying and fixing of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 KV grade of following size on cable tray as required. Upto 35 sq. mm (clamped with 1mm thick saddle)
321
13722
42.75
Supplying and making end termination with brass compression gland and copper lugs for following size of PVC insulated and PVC sheathed / XLPE aluminium conductor cable of 1.1 kV grade as required.
-
-
-
4 X 16 sq. mm (28mm)
2
450
225.29
4 X 10 sq. mm (25mm)
2
392
196.13
2 X 16 sq. mm (22mm)
2
373
186.66
2 X 10 sq. mm (19mm)
4
702
175.71
2 X 6 sq. mm (19mm)
4
699
174.99
2C X 2.5 sqmm copper conductor (19mm)
2
159
79.8
4C X 2.5 sqmm copper conductor (19mm)
2
159
79.8
6C X 2.5 sqmm copper conductor (19mm)
2
159
79.8
SUBHEAD IV-CIVIL WORKS
-
-
-
Providing, laying and fixing following dia RCC pipe NP2 class (light duty) in ground complete with RCC collars, jointing with cement mortar 1:2 (1 cement : 2 fine sand) including trenching (75 cm deep) and refilling etc as required.
-
-
-
100 mm dia
5
1126
225.29
150 mm dia
60
31672
527.88
250 mm dia
15
10663
710.88
Making of following size of Cable Chamber made of 230 mm thick brick work in cement mortar (1 cement : 6 sand) with PCC 100 mm thick PCC base plastering of inner and outer surface with cement mortar including providing of Heavy Duty C.I Cover complete with digging, refilling and removal of surplus soil complete as required.
-
-
-
900 mm x 800 mm x 1000 mm deep
1
5780
5780.75
600 mm x 600 mm x 800 mm deep
5
22828
4565.7
SUBHEAD V-MAIN L. T. PANELS
-
-
-
SITC OF MAIN PANEL FEEDER PILLAR
-
-
-
Design, Supply, installation, testing and commissioning of indoor/outdoor floor mounted/ wall mounted, IP43/IP65, IEC 61439/IS 8623, factory built, modular, sectionalised, compartmentalized, extendable type HT/LT cubicle panel of suitable size suitable for operation on 33/11/0.433/0.415 kV, 50 Hz AC 3 phase supply system fabricated from CRCA sheet steel of 2mm thick for frame work and covers, 3mm thick for gland plates with stiffeners wherever required, having vibration free structure chemically treated with seven tank process or better before painting for surface treatment and powder coated in approved shade, with suitable electrolytic grade high conductivity bus bars extensible, DMC/ SMC (whichever is superior) bus bar supports, with short circuit withstand capacity as mentioned ,bottom base channel of section not less than 100mmX 50mmX 5 mm thick, fabrication shall be done in transportable sections, entire panel shall have a common earth bar of required size at the rear with 2 Nos. earth stud, connections and interconnection with solid conductor wires / copper strips, neutral links, control wiring with 1.5 sqmm. & 2.5sqmm. PVC insulated FRLS copper conductor S/C cable for voltage & current respectively, including providing and fixing following switch gears as per SLD ,technical specifications etc.complete in all respect so as to fulfill all as required.
-
-
-
FP Outdoor Type(IP 65)
-
-
-
Incoming :
-
-
-
One (1) No 400 Amp. 4P MCCB of 36KA Breaking capacity
-
-
-
Metering :
-
-
-
Multifunction Meter
-
-
-
One (1) Set of Phase Indication Lamp.
-
-
-
Bus Bar :
-
-
-
One (1) No. 500 Amp.TPN aluminimum bus bar of suitable length.
-
-
-
Outgoing :
-
-
-
Phase indication lamps on each outgoing to be provided.
-
-
-
32Amp SP MCB (10kA) - 3 Nos.
-
-
-
32Amp SP MCB (10kA) - 1 No. Spare
-
-
-
Panel described as above
1
40527
40527
(I) EXTERNAL PLUMBING (GIRL'S HOSTEL)
-
-
-
SCHEDULE OF QUANTITIES FOR EXTERNAL SEWERAGE SYSTEM - I
-
-
-
Excavating trenches in all kind of soil of required width for pipes, cables etc. including excavation for sockets and dressing of sides, ramming of bottoms, depth upto 1.5 m. including getting out the excavated soil & then returning the soil as required, in layers not exceeding 20cm in depth including consolidating each deposited layer by ramming, watering, etc & disposig of surplus excavated soil as directed within a lead of 50m. Pipes 80mm to 300mm diameter.
150
22582
150.55
Providing, laying and joining glazed stone ware pipes grade 'A' with stiff mixture of cement mortar in the proportion of 1:1 (1 cement : 1 fine sand) including testing of joints etc. complete. 150mm diameter
125
60730
485.84
Providing & laying cement concrete 1:5:10 (1 cement :5 coarse sand :10 graded stone aggregate 40mm nominal size) alround S.W. Pipes including bed concrete as per standard design. 150mm diameter S.W. Pipe
25
20595
823.83
Constructing brick masonry manhole in cement mortar 1:4 (1 cement :4 coarse sand) RCC top slab with 1:2:4 mix (1 cement :2 coarse sand :4 graded stone aggregate 20mm nominal size), foundation concrete 1:4:8 mix (1 cement :4 coarse sand :8 graded stone aggregate 40mm nominal size) inside plastering 12mm thick with cement mortar 1:3 (1 cement :3 coarse sand) finished with floating coat fo neat cement and making channels in cement concrete 1:2:4 (1 cement :2 coarse sand :4 graded stone aggregate 20mm nminal size) finished with a floating coat of neat cement complete as per standard design Inside size 90x80cms and 45cms deep including CI cover with frame (light duty) 455x610mm internal diamensions total weight of cover and frame to be not less than 38 kg (weight of cover 23 kg and weight of frame 15kg). With FPS bricks of class designation 75
-
-
-
(i) For Sewer Line
5
44585
8917.03
Extra for depth of man hole size 90x80 cm
5
30811
6162.34
Providing orange colour safety foot rest of minimum 6mm thick plastic encapsulated as per IS : 10910 on 12mm dia steel bar conforming to IS: 1786 having minimum cross section as 23 mm x25mm and over all minimum length 263mm and width as 165mm with minimum 112mm space between protruded legs having 2mm tread on top surface by ribbing or chequering besides necessary and adequate anchoring projections on tail length on 138 mm as per standard drawing and suitable to with stand the bend test and chemical resistance test as per specifications and having manufactures's permanent identification mark to be visible even after fixing, including fixing in manholes with 30x20x15 cm cement concrete block 1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 20mm nominal size) complete as per design.
20
7732
386.62
EXTERNAL WATER SUPPLY SYSTEM -II
-
-
-
Excavating trenches in all kind of soil of required width for pipes, cables etc. including excavation for sockets and dressing of sides, ramming of bottoms, depth upto 1.5 m. including getting out the excavated soil & then returning the soil as required, in layers not exceeding 20cm in depth including consolidating each deposited layer by ramming, watering, etc & disposig of surplus excavated soil as directed within a lead of 50m. Pipes 80mm to 300mm diameter.
150
22582
150.55
Providing & fixing G.I. pipes complete with G.I. fittings including tenching and refilling etc. (external work)
-
-
-
a) 50mm nominal bore.
90
47895
532.17
b) 32mm nominal bore.
30
11317
377.26
c) 25mm nominal bore.
30
9798
326.61
Providing & fixing sand of grading zone V or coaser grade alround the G.I. Pipes in external work.
-
-
-
a) 50mm nominal bore.
65
7863
120.97
b) 32mm nominal bore.
75
8635
115.14
c) 25mm nominal bore.
75
8415
112.2
Providing and fixing gate valve (with cap complete with bolts, nuts, rubber insertion etc.
-
-
-
a) 50mm
1
716
716.86
b) 32mm
1
481
481.52
c) 25mm
2
869
434.59
Constructing masonry Chamber 60x60x75 cm, inside with 75 class designation brick work in cement mortar 1:4 (1 cement :4 coarse sand ) for sluice valve, with C.I. surface box 100mm top diameter, 160mm bottom diameter and 180mm deep (inside) with chained lid and RCC top slab 1:2:4 mix (1 cement : 2 coarse sand : 4 graded stone aggregate 20mm nominal size) necessary excavation foundation concrete 1:5:10 (1 cement : 5 fine sand : 10 graded stone aggregate 40mm nominal size) and inside plastering with cement mortar 1:3 (1 cement : 3 coarse sand) 12 mm thick finished with a floating coat of neat cement complete as per standard design : With F.P.S. bricks
6
45508
7584.67
DRAINS -III
-
-
-
Constructing brick masonry open surface drain with bricks of class designation 75 in cement mortar 1:4 (1 cement : 4 fine sand) including earth excavation, 10cm thick bed concrete 1:5:10 (1 cement : 5 fine sand : 10 graded stone aggregate 40mm nominal size) and 25mm thick cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 12.5mm nominal size) for filling haunches including 12mm cement plaster 1:4 (1 cement : 4 coarse sand ) with a floating coat of neat cement inside the drain, its top and exposed side including disposal of surplus earth complete as per standard design: 30cm drain 45cm average depth
130
257832
1983.33
(J) RAIN WATER HARVESTING (GIRL'S HOSTEL)
-
-
-
Earth work in excavation by mechanical means (Hydraulic excavatior)/manual means over areas(exceeding 30cm in depth. 1.5m in width as well as 10sqm on plan) including disposal of excavated earth, lead upto 50m and lift upto 1.5m, disposed earth to be levelled and neatly dressed.
-
-
-
In all kind of soil upto 1.5m depth
16.03
1986
123.94
In all kind of soil upto 1.5m to 3.0m. depth
16.03
3406
212.48
In all kind of soil upto 3.0m to 4.5m. depth
12.79
3850
301.02
Providing and laying in position cement concrete of specified grade excluding the ccost of centering and shuttering -All work up to plinth level: 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20mm nominal size).
0.8
4400
5501.17
Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in foundation and plinth in: Cement mortar 1:4 (1 cement : 4 coarse sand)
16.63
79100
4756.48
Reinforced cement concrete work inbeams, suspended floors, roofs having slope up to 15º landings, balconies, shelves, chajjas, intels, bands plain window sills, staircases and spiral stair cases up to floor five level excluding the cost of centering, shuttering, finishing and reinforcement with 1:2:4 (1 cement :2 coarse sand :4 graded stone aggregate 20mm nominal size)
1.07
7101
6636.69
Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete upto plinth level. Mild steel and Medium Tnsile steel bars.
84
6326
75.31
15 mm cement plaster on rough side of single or half brick wall mix 1:3 (1 cement : 3 coarse sand)
37.39
13225
353.73
Providing M.S. foot rests including fixing in manoholes with 20x20x10 cm cement concrete blocks 1:3:6 (1cement : 3 coarse sand : 6 graded stone aggregate 20mm nominal size) as per standard design: With 20x20mm square bar
12
4563
380.33
Providing and fixing in position precast RCC manhole cover and frame of required shape and approved quality. M.D. -10- Circular shape 500mm internal diameter
2
1637
818.77
Boring/drilling bore well of required dia for casing/ strainer pipe, by suitable method prescribed in IS: 2800 (part I), including collecting samples from different strata, preparing and submitting strata chart/bore log, including hire & running charges of all equipments, tools, plants & machineries required for the job, all complete as per direction of Engineer-incharge, upto 90 metre depth below ground level. Drilling of 300mm dia bore hole manually.
25
12354
494.19
Supplying, assembling, lowering and fixing in vertical position in bore well unplasticized PVC medium well screen (RMS) pipes with ribs, conforming to IS: 12818, including hire & labour charges, fittings & accessories etc. all complete, for all depths, as per direction of Engineer-in-charge. 150 mm nominal size dia
25
14095
563.81
Supplying, filling, spreading & leveling stone boulders of size range 5 cm to 20cm, in recharge pit, in the required thickness, for all leads & lifts, all complete as per direction of Engineer-in-charge.
3.53
3721
1054.22
Supplying, filling, spreading & leveling gravels of size range 5 mm to 10mm, in the recharge pit, over the existing layer of boulders, in required thickness, for all leads & lifts, all complete as per direction of Engineer-in-charge.
3.53
3791
1074.08
Supplying, filling, spreading & leveling coarase sand of size range 1.5 mm to 2mm in recharge pit, in required thickness over gravel layer, for all leads & lifts, all complete as per direction of Engineer-in-charge.
3.53
3791
1074.08
Gravel packing in tubewell construction in accordance with IS: 4097, including providing gravel fine/medium/coarse, in required grading & size as per actual requirement, all complete as per direction of Engineer-in-charge.
1
1413
1413.61
EXTERNAL PIPE NETWORK SYSTEM
-
-
-
Excavating trenches in all kind of soil of required width for pipes, cables etc. including excavation for sockets and dressing of sides, ramming of bottoms, depth upto 1.5 m. including getting out the excavated soil & then returning the soil as required, in layers not exceeding 20cm in depth including consolidating each deposited layer by ramming, watering, etc & disposig of surplus excavated soil as directed within a lead of 50m. Pipes 80mm to 300mm diameter.
115
28277
245.89
Providing, laying and joining glazed stone ware pipes grade 'A' with stiff mixture of cement mortar in the proportion of 1:1 (1 cement : 1 fine sand) including testing of joints etc. complete.
-
-
-
a) 150mm diameter S.W. Pipe
100
48584
485.84
b) 200mm diameter S.W. Pipe
15
10163
677.55
Providing & laying cement concrete 1:5:10 (1 cement :5 coarse sand :10 graded stone aggregate 40mm nominal size) upto haunches of S.W. Pipes including bed concrete as per standard design.
-
-
-
a) 150mm diameter S.W. Pipe
115
59670
518.87
b) 200mm diameter S.W. Pipe
15
9148
609.92
Constructing brick masonry manhole with 75 class designation F.P.S. bricks in cement mortar 1:4 (1 cement : 4 coarse sand) RCC top slab with 1:2:4 mix (1 cement : 2 coarse sand: 4graded stone aggregate 20mm nominal size); foundation concrete 1:4:8 mix (1 cement :4 coarse sand: 8 graded stone aggregate 40mm nominal size) inside plasstering 12mm thick with cement mortar 1:3 (1 cement :3 coarse sand) finished with a floating coat of neat cement and making channels in cement concrete 1:2:4 (1 cement :2 coarse sand : 4 graded stone aggregate 20mm nominal size) finished with a floating coat of neat cement complete as per standard design. a) Inside size 60x60 cm & 90 cm deep including C.I. cover with frame (light duty) total wt. of cover & frame to be not less than 38 Kg (wt. of cover 23 Kg & wt. of frame 15 Kg.
15
93709
6247.29
(K) SEPTIC TANK & SOAK PIT-100 USERS (GIRL'S HOSTEL)
-
-
-
Size :- Length = 7.50 M. Width = 2.65M Total Depth =3.00M
-
-
-
Earth work in excavation over areas including disposal of excavated earth, lead upto 50m, disposed earth to be levelled and neatly dressed.
-
-
-
In all kind of soil upto 1.5m depth
37.13
4601
123.94
In all kind of soil upto 1.5m to 3.0m. depth
39.61
8416
212.48
Providing and laying of cement concrete in base excluding the cost of centring and shuttering by 1:2:4 (1 cement : 2 coarse sand : 4 gradded stone aggregae 20mm nominal size)
2.48
13642
5501.17
Brick work with brick of class designation 150 in foundation and plinth in cement mortar (1 cement : 4 coarse sand)
18.48
95108
5146.56
Reinforced cement concrete work in slab with 1:1.5:3 (1 cement : 1.5 course sand : 3 graded stone aggregate 20mm normal size).
2.29
18397
8033.71
Reinforcement for R.C.C. work including, straightening, cutting bending binding and placing in position complete.
180
13460
74.78
Centring and shuttering including struting , proping etc and removal of form for slab.
22.92
14839
647.45
15mm cement plaster on rough side of mix 1:4 (1 cement : 4 course sand)
80.33
23095
287.51
Providing M.S. foot rest including fixing with 20x20x10 cm. cement concrete block 1:3:6 (1 cement : 3 coarse sand : 6 gradded aggregate of nominal size 20mm ) as per standard design with 20x20mm sq bars.
12
4563
380.33
Providing and fixing C.I. tee at the inlet and outlet of septic tank.
2
1179
589.95
Providing & fixing 75mm dia vent pipes.
1
729
729.5
Providing & fixing of 75mm dia cast iron terminal guard.
1
237
237.89
Providing and fixing in position precast RCC manhole cover and frame of required shape and approved quality.
-
-
-
M.D. -10- Circular shape 500mm internal diameter
2
1637
818.77
L.D. -2.5- Circular shape 450mm internal diameter
4
3266
816.71
Making soak pit 2.5 m diameter 3.0 metre deep with 45 x 45 cm dry brick honey comb shaft with bricks of class designation 75 and S.W. drain pipe 100 mm diameter, 1.8m long complete as per standard design. With F.P.S. bricks
1
18756
18756.33
(L) BOUNDARY WALL FOR GIRL'S HOSTEL
-
-
-
Earth work in excavation by mechanical means (Hydraulic excavator) / manual means over areas (exceeding 30cm in depth. 1.5m in width as well as 10 Sqm on plan) including disposal of excavated earth, lead upto 50m and lift upto 1.5m, disposed earth to be levelled and neatly dressed.
74.1
9183
123.94
Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level :1:4:8 (1 Cement : 4 coarse sand : 8 graded stone aggregate 40 mm nominal size)
7.28
34627
4756.48
R.C.C. work in lighter beams i.e. having spans upto 6 m. (Using 1:1.5:3 Mix concrete) [UPTO PLINTH]
2.32
14653
6316.2
[ABOVE PLINTH]
3.1
24904
8033.71
As in item 6 above but in R.C.C. Raft foundation and footing with approved stone ballast. (Using 1:1.5:3 Mix concrete)
10.61
67014
6316.2
Boring, Providing and installing cast in situ single under reamed piles of specified diameter and length below pile cap in M-20 cement concrete, to carry a safe working load not less than specified, excluding the cost of steel reinforcement but including the cost of boring with bentonite solution and the length of the pile to be embedded in pile cap etc. all complete. (Length of pile for payment shall be measured upto to the bottom of pile cap) : 300 MM dia Pile
37.02
79243
2140.56
R.C.C. work in R.C.C. columns in 1:1.5:3 having strength not less than M-20.
6.52
49409
7578.07
Mild steel or iron in plain work such as reinforced concrete or reinforced, brick work (when not included in anover all rates ) wrought to required shape as necessary including bending for proper completion of the work and including supply of steel its wastage bend hooks and authorised over lapping shall be measured upto floor two level.
27.55
207468
7530.63
Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in foundation and plinth in:Cement mortar 1:6 (1 cement : 6 coarse sand)
12.77
63595
4980.09
Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in superstructure above plinth level up to floor V level in all shapes and sizes in :Cement mortar 1:6 (1 cement : 6 coarse sand)
2.32
14751
6358.23
Half brick masonry with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in superstructure above plinth level up to floor V level.Cement mortar 1:4 (1 cement :4 coarse sand)
100.98
79238
784.69
12 mm cement plaster in single coat on rough side of single or half brick wall for interior plastering up to floor two level including internal rounded angles not exceeding 80 mm in girth and finshed even and smooth. (1) 1 cement : 6 fine sand
311.19
74670
239.95
Finishing wall with water proof cement paint of approved make and quality on new wood with two coat to give an even shade including supply of all materials, labour, tools and plant etc. required for proper completion of the work.
311.19
25399
81.62
Centering and shuttering including strutting, propping etc. and removal of form for :
-
-
-
Foundations, footings, bases of columns, etc. for mass concrete
41.7
11418
273.82
Columns, Pillars, Piers, Abutments, Posts and Struts
113.41
76124
671.23
Lintels, beams, plinth beams, girders, bressumers and cantilevers with water proof ply 12 mm thick
78.09
45908
587.89
Steel work welded in built up sections/ framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required.In gratings, frames, guard bar, ladder, railings, brackets, gates and similar works
363.52
43811
120.52
Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade.Two or more coats on new work over an under coat of suitable shade with ordinary paint of approved brand and manufacture : (M.S. works).
30.29
4785
157.98
(M) BORING OF TUBEWELL
-
-
-
Transportation of mini drilling Rig machine with camp equipage to site.
1
4750
4750
Drilling of 350mm dia bore hole with lowering of tubewell assembly.
50
23750
475
Supply and fixing of 200mm dia plain rigid PVC casing pipe (10 Kg./sqcm pressure rating) and accessories.
30
17100
570
Supply and fixing of 150mm dia plain rigid PVC casing pipe (10 Kg./sqcm pressure rating) and accessories.
30
15675
522.5
Supply and fixing of 150mm dia plain rigid PVC slotted pipe and accessories.
30
17100
570
Supply and fixing of nylon jali around the slotted pipes complete as required.
1
2850
2850
Providing and packing of coarse sand/pea gravel around the pipe.
1.5
3420
2280
Supply of 100mm dia Johnson screen.
1.5
1282
855
Supply & Installation of 2 H.P. Solar Submersible Pump with control panel, support wire etc. complete.
1
285000
285000
Providing 3 core 2.5 sqmm PVC insulated copper conductor submersible cable. (from pump panel to submersible pump)
50
9500
190
Providing and fixing 100mm dia G.I. Pipe complete with fitting and clamps including cutting and making good the wall etc. (from submersible pump to ground level)
20
11400
570
Providing and fixing 100mm dia. brass gate valve with CI wheel of approved quality.
1
807
807.5
Supply and fixing of tube well accessories i.e. well cap, clips, clamps, etc. to complete the job in all respect.
1
2565
2565
Fixing, testing and commissioning for erection and lowering of submersible pump, 100mm dia GI column pipe, 3 core 2.5 sqmm submersible copper cable upto the control panel, supporting clamps, cable clips pressure gauge, connection line and all other accessories required for the proper completion of the work.
1
3800
3800
Testing and development of tube well.
1
3800
3800
(N) C.C. ROAD
-
-
-
Earth work in excavation by mechanical means (Hydraulic excavator)/manual means over areas (exceeding 30 cm in depth, 1.5 m in width as well as 10 sqm on plan) including getting out and disposal of excavated earth lead upto 50 m and for all lift, as directed by Engineer-incharge. All kinds of soil.
91.26
11310
123.94
Preparation and consolidation of sub grade with power road roller of 8 to 12 tonne capacity after excavating earth to an average of 22.5 cm. depth, dressing to camber and consolidating with road roller including making good the undulations etc. and re-rolling the sub grade and disposal of surplus earth lead upto 50 metres.
3391.8
518436
152.85
Providing and laying cement concrete 1:4:8 (1 cement :4 coarse sand :8 graded Stone aggregate 40 mm nominal size) including supply of all materials, labour T & P rtc required for proper completion of the work and curing complete also including cost of formwork in foundation & floors.
30.42
144692
4756.48
Supplying and stacking at site:
-
-
-
90 mm to 45 mm size stone aggregate.
339.18
496966
1465.2
63 mm to 45 mm size stone aggregate
254.38
290598
1142.38
Local Sand @ 25% of Item No. 3a
84.79
125735
1482.91
Stone screening 11.2 mm nominal size (Type B)
169.59
266171
1569.5
Laying, spreading and compacting stone aggregate of specified sizes to WBM specifications in uniform thickness, hand picking, rolling with 3 wheeled road/vibratory roller 8-10 tonne capacity in stages to proper grade and camber, applying and brooming requisite type of screening / binding material to fill up interstices of coarse aggregate, watering and compacting to the required density.
593.56
433910
731.03
Providing & laying of a separation membrane between the concrete slab & the sub-base of impermeable plastic sheet 125 microns thick laid flat without creases. Overlap of plastic sheet is necessary and should be 300mm. The separation membrane is to be stuck to the lower lvl. with patches of adhesives or concrete nails with washer.
3391.8
96666
28.5
Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level : 1:2:4 (1 cement : 2 coarse sand (zone-III) derived from natural sources : 4 graded stone aggregate 20 mm nominal size derived from natural sources).
488.49
2687266
5501.17
Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in foundation and plinth in: Cement mortar 1:6 (1 cement : 6 coarse sand)
141.96
706973
4980.09
Trimixing on surface
3391.8
1127773
332.5
Providing and laying in position bitumen hot sealing compound for expansion joints etc. Using grade 'A' sealing compound.
1695.9
10243
6.04
(O) INTERLOCKING
-
-
-
Earth work in excavation by mechanical means (Hydraulic excavator)/manual means over areas (exceeding 30 cm in depth, 1.5 m in width as well as 10 sqm on plan) including getting out and disposal of excavated earth lead upto 50 m and for all lift, as directed by Engineer-incharge. All kinds of soil.
31.24
3871
123.94
Preparation and consolidation of sub grade with power road roller of 8 to 12 tonne capacity after excavating earth to an average of 22.5 cm. depth, dressing to camber and consolidating with road roller including making good the undulations etc. and re-rolling the sub grade and disposal of surplus earth lead upto 50 metres.
633.86
96885
152.85
Providing and laying cement concrete 1:4:8 (1 cement :4 coarse sand :8 graded Stone aggregate 40 mm nominal size) including supply of all materials, labour T & P rtc required for proper completion of the work and curing complete also including cost of formwork in foundation & floors.
7.68
36529
4756.48
Supplying and stacking at site:
-
-
-
90 mm to 45 mm size stone aggregate.
63.39
92879
1465.2
63 mm to 45 mm size stone aggregate
47.54
54308
1142.38
Local Sand @ 25% of Item No. 3a
15.85
23504
1482.91
Stone screening 11.2 mm nominal size (Type B)
31.69
49737
1569.5
Laying, spreading and compacting stone aggregate of specified sizes to WBM specifications in uniform thickness, hand picking, rolling with 3 wheeled road/vibratory roller 8-10 tonne capacity in stages to proper grade and camber, applying and brooming requisite type of screening / binding material to fill up interstices of coarse aggregate, watering and compacting to the required density.
110.93
81093
731.03
Providing and laying factory made chamfered edge Cement Concrete paver blocks in footpath, parks, lawns, drive ways or light traffic parking etc, of required strength, thickness & size/ shape, made by table vibratory method using PU mould, laid in required colour & pattern over 50mm thick compacted bed of sand, compacting and proper embedding/laying of interlocking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with sand and cutting of paver blocks as per required size and pattern, finishing and sweeping extra sand. complete all as per direction of Engineer-in-Charge.80 mm thick C.C. paver block of M-35 grade with approved colour design and pattern.
633.86
483090
762.14
Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in foundation and plinth in: Cement mortar 1:6 (1 cement : 6 coarse sand)
7.85
39093
4980.09
(P) HORTICULTURE WORK
-
-
-
Supplying and stacking sludge at site including royalty and carriage up to 5 km (sludge measured in stacks will be reduced by 8% for payment).
78.75
21180
268.96
Carrigae of sludge upto 5 K.M.
78.75
13511
171.57
Supplying and stacking at site dump manure from approved source including carriage upto 1 km (manure measured in stacks will be reduced by 8% for payment) : Screened through sieve of I.S. designation 4.75 mm
26.25
7682
292.66
Carrigae of manure upto 5 K.M.
26.25
4503
171.57
Mixing earth and sludge or manure in the required proportion specified or directed by the Officer-in-charge.
105
3511
33.44
Spreading of sludge, dump manure or/and good earth in required thickness (cost of sludge dump manure or/and good earth to be paid separately).
105
5028
47.89
Digging holes in ordinary soil and refilling the same with the excavated earth mixed with manure or sludge in the ratio of 2:1 by volume (2 parts of stacked volume of earth after reduction by 20% : 1 part of stacked volume of manure after reduction by 8%), flooding with water, dressing, including removal of rubbish and surplus earth, if any with all leads and lifts ( cost of manure, sludge or extra good earth if needed to be paid for separately). Holes 0.9 m dia. and 0.90 m deep.
25
3273
130.92
Plantation of Trees, Shrubs, and Hedge at site i/c watering and removal of unserveiceable material’s as per direction of officer in charge (excluding cast of plant & water).Trees Plant
50
334
6.68
Providing and stacking of Bottle palm of ht. 210-240 cm bottom girth 30-35 cm well developed in big HDPE bags.
5
1601
320.2
Providing and stacking of Bottle palm of ht. 270-300 cm bottom girth 40-50 cm well developed in big HDPE bags as per direction of the officer-in-charge
7
3522
503.17
Providing and stacking of Foxtail palm of ht. 180-210 cm bottom girth 25- 30 cm well developed in big size HDPE bags as per direction of the officer-in-charge.
8
3513
439.13
Providing and stacking of Michelia champa (Golden Champa) of height 90- 105 cm. in earthen pots of size 25 cm as per direction of the officer-in-charge.
5
411
82.34
Grassing with selection No.1 grass including watering and maintenance of the lawn for 30 days or more till the grass forms a thick lawn, free from weeds and fit for mowing including supplying good earth, if needed (the good earth shall be paid for separately). With grass Turf.
525
6389
12.17
Providing and fixing M.S. flat iron tree guard 60 cm dia and 2 m high, above ground consisting 4 nos 25 x 6 mm, 2.25 m long and 8 nos 25 x 3 mm 2 m long verticals M.S. flats, riveted to 3 nos 25 x 6 mm M.S. flat iron rings in two halves, fixing together at site with required six numbers of 8 mm dia. and 30 mm long bolts, including painting two coats with synthetic enamel paint of approved brand and manufacture over a coat of primer. One name plate of 1 mm thick M.S. sheet of size 250x100 mm shall be welded to the treeguard near the middle height and lettered CPWD / PWD/ any other approved name. The tree guard shall be suitably fixed to the ground by embedding four legs of tree guard in pits of suitable dia and to a depth of 25 cm, refilling the pits with soil and ramming, complete in all respect as per satisfaction and direction of Officer-in-charge.
25
103677
4147.11
(Q) DEDUCT COST OF OLD BOY'S HOSTEL
-
-
-
GST as per Applicable
-
-
-
Evaluation Notes How It Works ?
Potential Partner
Select Your Requirements