Uttar Pradesh Housing And Development Board Tender

250 mm dia A.C. pipe Class-15

200 mm dia A.C. pipe Class-15

Supply, carting and laying of following dia pipe 6.00 Kg/Cm2 PVC (ISI Mark) pipe up tp 8 KM for within the muncipal limit and including all quality specials coupplings fittings to site of work lowering the same into treanchs and laying true to alignment & gradient, including testing of pipe line ( Excluding the cost of trenching but including cutting pipe for making up the length and making joints.

150 mm dia OD or 160 mm dia ID PVC Pipe

125 mm dia OD or 140 mm dia ID PVC Pipe

100 mm dia OD or 110 mm dia ID PVC Pipe

Supply of I.S.I. mark PVC specials for different type of pipes and Fixtures such as tee" bend, Sockets, Tail piece, Tapers, Flanges etc. (10% Cost of Item No-3)

Supply and fixing of following size ISI mark D/F or plain ended sluice valves/Scover valves Class-II confirming to I.S. 14846/2000 with cap including cartage, loading and unloading lowering them in already prepared trenches and flxing in position i/c supply of jointing material such as nutbolts, rubber insertion etc complete.and i/c all taxes etc complete.

For 100 mm dia

For 300 mm dia

Supply and fixing of 80mm size ISI mark D/F fire hydrants confirming to I.S. 14846/2000 with cap including cartage, loading and unloading lowering them in already prepared trenches and flxing in position i/c supply of jointing material such as nutbolts, rubber insertion etc complete.and i/c all taxes etc complete.

Supply and fixing of 80 mm size double action ISI mark D/F Air valves confirming to I.S. 14846/2000 with cap including cartage, loading and unloading lowering them in already prepared trenches and flxing in position i/c supply of jointing material such as nutbolts, rubber insertion etc complete.and i/c all taxes etc complete.

Providing all materials and construction of sluice value or scover values, fire Hydrant and air valve chamber as per attached drawing & design of U.P. Jal Nigam complete with excavation and removal of surplus earth to a distance 30 M. Laying 10 cm thick cement concrate 1:5:10 with one part of cement,Five part coarse sand of F.M. 2.2 to 3.6 and ten part of 40 mm graded stone ballast in foundation /floors base of the chamber and brick masonary in 1:5 cement and coarse sand of F.M. 1.50 to 2.20 Mortar and plaster in 1:3 cement and coarse sand of F.M/ 1.50 to 2.20 mortar, floor with 1:2:4 cement concrete, R.C.C cover in the proportion 1:1.5:3 cement, coarse sand of F.M. 2.20 to 3.60 and 20 mm graded stone grit with 35x35x5mm M/S. angle frame duly welded with 6 mm dia bars @ 10 cm i/c both ways which will be fixed or hinged with 3 Nos hinges (if reguired ) in 40x40x5 mm angle iron frame with 4 Nos hold fast of 35x5 mm M.S. flat of 10cm long and grouted with 10 cm thick R.C.C. of 1:1.5:3 over top of the chamber i/c cost of steel and fixng in position etc and also i/c supply of all material, labour, T&P etc complete in all respect as per direction of Engineer incharge. size of chamber will be as per drawing or as per direction A.E. incharge.

chamber size 0.90x0.90m (inner size)

chamber size 1.20x1.20 m (inner size)

Supply of C.I. specials for different type of pipes and Fixtures such as "Tee" bend, Sockets, Tail piece, Tappers, Flanges, C.I. 'D' joint etc. upto 300 mm dia

Supply of C.I. specials for different type of pipes and Fixtures such as "Tee" bend, Sockets, Tail piece, Tappers, Flanges, C.I. 'D' joint etc. above 300 mm dia