Rural Engineering Department Tender
If you're a registered bidder for etender UP and want to inquire about any e-tender UP government has posted, this is your stop. No need to enter every detail on the website of <a href="https://etender.up.nic.in">etender.up.nic.in</a> - BidAssist filters will help you find the exact UP etender you're looking for. Read to learn how to search & bid for etender UP.
Rural Engineering Department Tender
Civil And Construction
Building Construction
Eprocure
Opening Date9 May 2023
Closing Date22 May 2023
Tender Amount₹ 1,27,39,000
Costs
EMD
₹ 2,56,000Document Cost
₹ 5,000Tender Fee
Refer Documents
Description
Scription for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user
Contact
Tender Id
2023_REDUP_800980_11Tender No
1027/SE RED DEVIPATAN CIRCLE/22-23 Dt 27-3-23Tender Authority
Rural Engineering Department ViewPurchaser Address
-Website
http://http://upred.gov.in/
GEM & Bid Advisory Services
Get portal registration, tender bidding, product/service listing or vendor/MSME certification services at a nominal cost
Documents
BOQ Items
Providing and injecting chemical emulsion for preconstruction antitermite treatment and creating and barrier under and around the columns pits,wall trenche basement excavation top surface if plinth filling junction of wall and floor,along the external permeter of binding expansion joints,surrounding of pipes and conduit etc.complete (plinth area of the building at ground floor only shall be as per I.S.6313 (part II 1981) Aldrine emulsiable concentrate or any other approved material such as Hepthachlor or Chlordane will be used.The rate of application of chemical emulsion shall be as follows:-
-
-
-
(1) Treatment for masonry and foundation 5 litres per sq.M.
-
-
-
(2) Back fill in immediate contact with foundation 7.50 litres per sq.M.
-
-
-
(3) Treatment of top surface of plinth filling 5 litres per sq.M.
-
-
-
(4) Treatment of soil along external perimeter of building 7.50 litres per sq.M.
-
-
-
(5) Treatment of soil under apron along external perimeter 5 litres per sq.M.
139.1
25038
180
Providing and laying in cement concrete 1:4:8 (1 cement :4 coarse sand : 8 graded stone ballast 40 mm nominal size) including supply of all materials,labour and T&P et.required for proper completion of the work and curring complete,also including cost of form work in foundation and floors as per SI No.281.
23.24
183596
7900
Earth filling in plinth including supplly of necessary quantity of earth and embankment to be in 200 mm layers including the ramming and dressing the surface to required levels directed by E/I including proper completion of the work including Royalty as per SI.No.253.
493.16
97497
197.7
Sand filling in plinth under floors including lead upto 50m and lift upto 1.50m including materials,labour and T&P for proper completion of the work as per SI No.255
13.11
10619
810
Cost cement concrete door sills chaukhats,boundary post,shalves and similar work with cement,approved coarse sand and 20mm (¾") gauge approved stone ballast in the proportion 1:2:4 excluding supply of reinforcement and its bending the same with 24BG binding wire including supply of all materials,labour and T & P etc.required for proper completion of the work as per SI No.282
3.45
33120
9600
RCC works with cement,approved coarse sand and 20mm (¾") gauge approved stone ballast in the proportion 1:1½:3 in lintels of doors and windows,sunshade and RCC projection excluding supply of reinforcement and its bending the same with 24BG binding wire including supply of all materials,labour and T & P etc.required for proper completion of the work as per SI No.283
22.2
227845
10263.3
RCC work with cement,approved coarse sand and 20 mm gauge approved stone ballast in the proportion of 1:1½:3 in RCC slab excluding the supply of reinforcement and its bending but including its bending,supply of all other materials,labour and T & P as per SI No.284(b)
65.49
698339
10663.3
RCC works with cement,approved coarse sand and 20mm (¾") gauge approved stone ballast in the proportion 1:1½:3 in lighter beams i.e.having span upto 6.00m excluding supply of reinforcement and its bending the same with 24BG binding wire including supply of all materials,labour and T & P etc.required for proper completion of the work as per SI No.285(b).
30.53
327077
10713.3
RCC works with cement,approved coarse sand and 20mm (¾") gauge approved stone ballast in the proportion 1:1½:3 in RCC raft foundation and footing excluding supply of reinforcement and its bending the same with 24BG binding wire including supply of all materials,labour and T & P etc.required for proper completion of the work as per SI No.287.
31.07
300238
9663.3
RCC works with cement,approved coarse sand and 20mm (¾") gauge approved stone ballast in the proportion 1:1½:3 in RCC columns excluding supply of reinforcement and its bending the same with 24BG binding wire including supply of all materials,labour and T & P etc.required for proper completion of the work as per SI No.289.
18.99
203193
10700
Boring,Providing and installing 300 mm dia cast in situ single under reamed piles of specified diameter and length below pile cap in cement concrete1:1½:3 (1cement:1½ approved coarse sand : 3 graded stone aggregate 20 mm nominal size)to carry a safe working load not less than specified,excluding the cost of steel reinforcement but including the cost of boring with bentonite solution and the length of the pile to be embedded in pile cap etc.all complete.(Length of pile for payment shall be measured upto to the bottom of pile) as per DSR No.20.3.1
468
1050426
2244.5
Extra over item No.20.3.1 for providing additional bulb in under reamed piles,under specified dia meter 300mm(Only the quantity of extra bulbs area to be paid) as per DSr.No.20.4.1
78
122257
1567.4
Class-150 brick work in 1:6 cement and coarse sand of 2.25 fineness modulous mortar in foundation and plinth including supply of all materials,labour and T&P etc.required for proper completion of the work as per SI.No.303
23.31
137529
5900
Class-150 brick work in 1:4 cement and coarse sand of 2.25 fineness modulous mortar in foundation and plinth including supply of all materials,labour and T&P etc.required for proper completion of the work as per SI.No.305(b)
1.17
7020
6000
M-150 class brick work in 1:6 cement and coarse sand 2.25 F.M. mortar in super structure including necessary cutting and moulding of bricks as required and also honey comb brick work as per SI No.303,309 & 310
35.66
221805
6220
1st floor
28.45
178728
6282.2
For 2nd floor
28.45
180515
6345
For 3rd floor
28.45
182321
6408.5
For 4th floor
5.73
37088
6472.6
M-150 class brick work in 1:4 cement and coarse sand 2.25 F.M.mortar in super structure including necessary cutting and moulding of bricks as required and also honey comb brick work as per SI No.305(b),309 & 310(a)
13.87
85439
6160
For 1st floor
7.4
46039
6221.6
For 2nd floor
7.4
46500
6283.82
For 3rd floor
7.4
46965
6346.66
For 4rth floor
7.56
48460
6410.13
Fabrication of iron work of small size and section such as holding down bolts,hold fast,tie rods,grating etc.(when not wrought to required from including supply of steel and its wastage including cost of bolts,nuts if required for and welding,grinding and making,holes as required for completion as per SI.No.502
4121.2
267878
65
Mild steel or iron in plain work such as reinforced concrete or reinforced brick work to required shape as necessary including bending for completion of work and including supply of Tor steel its wastage bend hooks and authorised overlapping shall be measured as per SI No.504
305.55
1879132
6150
Fixing of door,windows and ventilator frames in position in building including proper adjustment required for proper completion of the work
-
-
-
Doors
50
4020
80.4
Windows
48
3086
64.3
Ventilators
18
691
38.4
Supply and fixing of 35 mm thick single leaf Flush doors commercial quality conforming to I.S.2202 Part I (1983) including fixing of wooden cleats and stoppers and including fixing and adjustment of hinges,bolts locks,handles,springs fitting as per S.I.No.470(a).
90.3
162540
1800
Providing and fixing ISI marked oxidised M.S.sliding bolt 16mm dia nuts and 300mm long with necessary screws etc.completenas per DSR-9.62.1
14
1958
139.9
Providing and fixing ISI marked oxidised M.S.sliding bolt 16mm dia nuts and 250mm long with necessary screws etc.completenas per DSR-9.62.2
40
5100
127.5
Providing and fixing ISI marked oxidised M.S.tower bolt 10mm dia nuts and 250mm long with necessary screws etc.completenas per DSR-9.63.1
108
5324
49.3
Providing and fixing ISI marked oxidised M.S.tower bolt 10mm dia nuts and 200mm long with necessary screws etc.completenas per DSR-9.63.2
108
4698
43.5
Providing and fixing ISI marked oxidised M.S.door handles 150 mm long conforming to IS:4992 with necessary screws etc.completenas per DSR-9.66.1
216
5853
27.1
Provding and fixing of glass strips 4 mm thick and 25 mm wide in joints of terrazo/cement concret floor as per DSR-11.13
567.69
19187
33.8
12 mm thick plaster cement and coarse sand of 2.25 finenss modulous mortar in 1:4 upto plinth including supply of all materials,labour and T&P etc.required for proper completion of the work as per SI.No.584.
13.65
3344
245
12 mm thick plaster cement and fine sand of 1.25 finenss modulous mortar over smooth surface in 1:6 including supply of all materials,labour and T&P etc.required for proper completion of the work as per SI No.586
1281.91
192286
150
15 mm thick plaster cement and fine sand of 1.25 finenss modulous mortar over rough surface in 1:6 including supply of all materials,labour and T&P etc.required for proper completion of the work as per DSR-13.2.2
946.5
168666
178.2
Engraving lines in the plaster of outer face wall vertically and horizontally to display th esurface as stone facing as directed by the E/I including all labour and T&P etc.required for proper completion of the work. Add for extra labour to all item of plaster as S.I.No 598
557.1
21169
38
2.50 cm(1") thick 1:2:4 plain cement concrete floor with cement approved coarse sand and 20 mm (¾") graded approved stone laid in panels finished with 3 mm (1/8") flooring coat of neat cement or cement and marble dust in 5:1 as specified over and without base including supply of all materials,labour and T&P etc.required for proper completion of the work as per SI No.601
58.25
18931
325
40 mm(1½") thick 1:2:4 plain cement concrete floor with cement approved coarse sand and 20 mm (¾") graded approved stone laid in panels finished with 3 mm (1/8") flooring coat of neat cement or cement and marble dust in 5:1 as specified over and without base including supply of all materials,labour and T&P etc.required for proper completion of the work as per SI No.605.
10.59
5295
500
Udaipur green marble stone flooring with 18 mm thick marble stone ,as per sample of marble approved by Engineer-in-charge, over 20 mm(average) thick base of cement mortar 1:4 (1cement : 4 coarse sand) laid and jointed with grey cement slurry,including rubbing and polishing complete as per DSR-11.23.5
15.67
30949
1975.1
Providing and laying 25 mm thick Kota stone slab flooring over 20 mm thick base of cement morter 1:4(1cement : 4 coarse sand) laid over and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete as per DSR-11.26.1
117.12
193985
1656.3
Providing and fixing 1st quality ceramic glazed wall tiles conforming to IS:15622 (thickness to be specified by the manufacture),of approved make,in all colours,shades except burgundy,bottle green,black of any size as approved by Engineer-in-chage,in skirting,risers of steps and dados,over 12 mm thick bed of cement mortar 1:3 (1cement : 3 coarse sand) and jointing with grey cement slurry @ 3.30kg per sqm,including pointing in white cement mixed with pigment of matching shade complete as per DSR-11.36/8.31
166.39
172563
1037.1
Providing and laying rectified Glazed Ceramic floor tiles of size 300x450mm or more (thickness to be specified by the manufacture),of 1st quality conforming to IS:15622 of approved makein all colours,shades exceptwhite,ivory,Grey,Fume red Brown laid on 20 mm thick cement mortar 1:4 (1cement : 4 coarse sand) including pointing the joints with white cement matching pigments etc. complete as per DSR-11.40
52.52
49500
942.5
Providing and laying vetrified floor tiles size of the 600mm x 600 mm with water absorption less than 0.08% and conforming to IS:15622,of approved make,in all colours and shades,laid on 20 mm thick cement mortar 1:4 (1 cement : 4 coarse sand) including grouting the joints with white cement and matching pigments etc.complet as per DSR.No.11.41.2
300.27
364677
1214.5
Providing and laying vetrified floor tiles size of the 600mm x 600 mm with water absorption less than 0.08% and conforming to IS:15622,of approved make,in all colours and shades in skirting, riser of steps, over 12 mm thick bed of cement mortar 1:3 (1 cement : 3 coarse sand) i jointing with grey cement slurry @ 3.3 kg/ sqm including grouting thejoint with white cement & matching pigments etc. complete as per DSR.No.11.46.2
57.52
69225
1203.5
Providing and fixing of 110 mm dia wall face unplasticised Rigid P.V.C. rain water pipes conforming to IS:13592 Type A,including jointing with seal ring conforming to IS:5382,leaving 10 mm gap for thermal expansion as per DSR-12.41.2
128
47065
367.7
Finishing walls with Premium Acrylic Smooth exterior paint with Silcone additives of required shade on new work (Two or more coats applied @ 1.43 ltr/10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/ 10 sqm) as per DSR.No.13.46.1.
1209.45
119735
99
Providing and applying white cement based putty of average thickness 1 mm of approved brand and manufacturer,over the plasterd wall surface even and smooth surface as per DSR-13.80.
2704.67
267762
99
Painting or Varnishing new iron work in small areas of new wood work with one coat of ready mixed priming paint and two coat of approved superior quality ready mixed enemel paint of varnish including sand papering,rubbing and cleading the surface and supply of all materials,labour and T&P required for proper completion of the work(the paint to be used should confirm to I.S.I.103-1950) as per SI No 641 & 642
291.64
32663
112
Wall painting with acrylic emulsion paint of approved brand and manufacture to give an even shade:Two or more coats on new work (1st quality (Royal,Silk) Asian/Berger) as per DSR.No.13.60.1
1639.54
173791
106
Providing and laying water proofing treatment in sunken portion of WCs,bathroom etc.,by applying cement slurry mixed with water proofing cement compound consisting of applying:(a) first layer of slurry of cement @ 0.488 kg/sqm mixed with water proofing cement compound @ 0.253 kg/sqm.This layer will be allowed to air cure for 4 hours.(b) Second layer of cement @ 0.242 kg/sqm mixed with water proofing cement compound @ 0.126 kg/sqm.This layer will be allowed to air cure for 4 hours followed with water curing for 48 hours.The rate includes preparation of surface,treatment and sealing of all joints,corners,junctions of pipes and masonary with polymer mixed slurry as per DSR-22.5
102.76
27200
264.7
Providing and laying of "brick coba" 12mm thick laid with M-150 class brick bat coba 7.50 cm thick with gap of 15 mm to each other over 20 mm thick base of cement morter 1:4 cement and coarse sand mixed with water proofing compond spreading cement slurry mixed with acrelic cement concrete water proofing compound filled gaps of coba & top of coba morter mixed with water proofing compound in 1:4 cement and coarse sand morter finished smooth & top mashed false square 30 cm x30 cm and side wall parapet shall be monolythic plaster wall up to 30 cm higher and junction and corner shall be rounded by brick ballast cement and coarse sand masonary coba with top finished plaster mixed with acetic water proofing compound @ 2.00% by weight & including supply of all materials,labour T & P etc.required for proper completion of the work.
148.46
155883
1050
Providing and laying of light cinder filling under floor of Toilets & other sunken roofs.
-
-
-
S/F of hexagonal fan box with hexagonal side of approx 80 mm in lenth fadricated from 16 SWG M.S.sheet incorporating 10 mm dia M.S.round bar duly bent for supporting fan hanger dully painted with red oxide and screwing arrangement with wiring conduit laid on the RCC roof before concreting along with supply of all materials,labour and T&P etc.for proper completion of work as per SI.No 1149.
32
4800
150
VIVECHNA ROOM
-
-
-
Clearing jungle including up rooting of trunk vegetation grass bush wood trees and sapling of girth upto 30cm.Measured at a height of 1meter above ground level and removal of rubbish upto a distance of 50m.outside the periphery of area cleared as per SI.No.259
110
660
6
Excavation in foundation in soil (loam,clay and sand) including lift upto 1.50m and lead 30m & including filling,watering and ramming of excavated earth into the trenches into the space between the building and the sides of foundation tenches or into the plinth and removal and disposal of surplus earth as per SI No.251
74.83
9353
125
Providing and injecting chemical emulsion for preconstruction antitermite treatment and creating and barrier under and around the columns pits,wall trenche basement excavation top surface if plinth filling junction of wall and floor,along the external permeter of binding expansion joints,surrounding of pipes and conduit etc.complete (plinth area of the building at ground floor only shall be as per I.S.6313 (part II 1981) Aldrine emulsiable concentrate or any other approved material such as Hepthachlor or Chlordane will be used.The rate of application of chemical emulsion shall be as follows:-
-
-
-
(1) Treatment for masonry and foundation 5 litres per sq.M.
-
-
-
(2) Back fill in immediate contact with foundation 7.50 litres per sq.M.
-
-
-
(3) Treatment of top surface of plinth filling 5 litres per sq.M.
-
-
-
(4) Treatment of soil along external perimeter of building 7.50 litres per sq.M.
-
-
-
(5) Treatment of soil under apron along external perimeter 5 litres per sq.M.
60.28
10850
180
Providing and laying in cement concrete 1:4:8 (1 cement :4 coarse sand : 8 graded stone ballast 40 mm nominal size) including supply of all materials,labour and T&P et.required for proper completion of the work and curring complete,also including cost of form work in foundation and floors as per SI No.281.
15.14
119606
7900
Earth filling in plinth including supplly of necessary quantity of earth and embankment to be in 200 mm layers including the ramming and dressing the surface to required levels directed by E/I including proper completion of the work including Royalty as per SI.No.253.
195.19
38589
197.7
Sand filling in plinth under floors including lead upto 50m and lift upto 1.50m including materials,labour and T&P for proper completion of the work as per SI No.255
7.99
6471
810
Cost cement concrete door sills chaukhats,boundary post,shalves and similar work with cement,approved coarse sand and 20mm (¾") gauge approved stone ballast in the proportion 1:2:4 excluding supply of reinforcement and its bending the same with 24BG binding wire including supply of all materials,labour and T & P etc.required for proper completion of the work as per SI No.282
0.5
4800
9600
RCC works with cement,approved coarse sand and 20mm (¾") gauge approved stone ballast in the proportion 1:1½:3 in lintels of doors and windows,sunshade and RCC projection excluding supply of reinforcement and its bending the same with 24BG binding wire including supply of all materials,labour and T & P etc.required for proper completion of the work as per SI No.283
5.76
59116
10263.3
RCC work with cement,approved coarse sand and 20 mm gauge approved stone ballast in the proportion of 1:1½:3 in RCC slab excluding the supply of reinforcement and its bending but including its bending,supply of all other materials,labour and T & P as per SI No.284(b)
8.5
90638
10663.3
RCC works with cement,approved coarse sand and 20mm (¾") gauge approved stone ballast in the proportion 1:1½:3 in lighter beams i.e.having span upto 6.00m excluding supply of reinforcement and its bending the same with 24BG binding wire including supply of all materials,labour and T & P etc.required for proper completion of the work as per SI No.285(b).
3.52
37710
10713.3
RCC works with cement,approved coarse sand and 20mm (¾") gauge approved stone ballast in the proportion 1:1½:3 in RCC raft foundation and footing excluding supply of reinforcement and its bending the same with 24BG binding wire including supply of all materials,labour and T & P etc.required for proper completion of the work as per SI No.287.
1.18
11402
9663.3
RCC works with cement,approved coarse sand and 20mm (¾") gauge approved stone ballast in the proportion 1:1½:3 in RCC columns excluding supply of reinforcement and its bending the same with 24BG binding wire including supply of all materials,labour and T & P etc.required for proper completion of the work as per SI No.289.
0.7
7490
10700
Class-150 brick work in 1:6 cement and coarse sand of 2.25 fineness modulous mortar in foundation and plinth including supply of all materials,labour and T&P etc.required for proper completion of the work as per SI.No.303
38.93
229687
5900
M-150 class brick work in 1:6 cement and coarse sand 2.25 F.M. mortar in super structure including necessary cutting and moulding of bricks as required and also honey comb brick work as per SI No.303,309 & 310
26.77
166509
6220
M-150 class brick work in 1:4 cement and coarse sand 2.25 F.M.mortar in super structure including necessary cutting and moulding of bricks as required and also honey comb brick work as per SI No.305(b),309 & 310(a)
7.57
46631
6160
Fabrication of iron work of small size and section such as holding down bolts,hold fast,tie rods,grating etc.(when not wrought to required from including supply of steel and its wastage including cost of bolts,nuts if required for and welding,grinding and making,holes as required for completion as per SI.No.502
666.45
43319
65
Mild steel or iron in plain work such as reinforced concrete or reinforced brick work to required shape as necessary including bending for completion of work and including supply of Tor steel its wastage bend hooks and authorised overlapping shall be measured as per SI No.504
21.56
132594
6150
Fixing of door,windows and ventilator frames in position in building including proper adjustment required for proper completion of the work
-
-
-
Doors
10
804
80.4
Windows
4
257
64.3
Ventilators
4
153
38.4
Supply and fixing of 35 mm thick single leaf Flush doors commercial quality conforming to I.S.2202 Part I (1983) including fixing of wooden cleats and stoppers and including fixing and adjustment of hinges,bolts locks,handles,springs fitting as per S.I.No.470(a).
17.01
30618
1800
Providing and fixing ISI marked oxidised M.S.sliding bolt 16mm dia nuts and 300mm long with necessary screws etc.completenas per DSR-9.62.1
4
559
139.9
Providing and fixing ISI marked oxidised M.S.sliding bolt 16mm dia nuts and 250mm long with necessary screws etc.completenas per DSR-9.62.2
6
765
127.5
Providing and fixing ISI marked oxidised M.S.tower bolt 10mm dia nuts and 250mm long with necessary screws etc.completenas per DSR-9.63.1
8
394
49.3
Providing and fixing ISI marked oxidised M.S.tower bolt 10mm dia nuts and 200mm long with necessary screws etc.completenas per DSR-9.63.2
12
522
43.5
Providing and fixing ISI marked oxidised M.S.door handles 150 mm long conforming to IS:4992 with necessary screws etc.completenas per DSR-9.66.1
20
542
27.1
Providing and fixing glass panes with putty and glazing clips in steeel doors,windows,clerestory windows all complete with 4 mm thick galss panes as DSR-10.30.1
7.11
5196
730.83
Provding and fixing of glass strips 4 mm thick and 25 mm wide in joints of terrazo/cement concret floor as per DSR-11.13
89.91
3038
33.8
12 mm thick plaster with cement and coarse sand in 1:3 with water proofing compound including supply of all materials,labour and T&P etc.required for proper completion of the work as per SI No.583.
67.95
15642
230.2
12 mm thick plaster cement and coarse sand of 2.25 finenss modulous mortar in 1:4 upto plinth including supply of all materials,labour and T&P etc.required for proper completion of the work as per SI.No.584.
21.29
5216
245
12 mm thick plaster cement and fine sand of 1.25 finenss modulous mortar over smooth surface in 1:6 including supply of all materials,labour and T&P etc.required for proper completion of the work as per SI No.586
190.93
28639
150
15 mm thick plaster cement and fine sand of 1.25 finenss modulous mortar over rough surface in 1:6 including supply of all materials,labour and T&P etc.required for proper completion of the work as per DSR-13.2.2
168.7
30062
178.2
Engraving lines in the plaster of outer face wall vertically and horizontally to display th esurface as stone facing as directed by the E/I including all labour and T&P etc.required for proper completion of the work. Add for extra labour to all item of plaster as S.I.No 598
89.91
3416
38
2.50 cm(1") thick 1:2:4 plain cement concrete floor with cement approved coarse sand and 20 mm (¾") graded approved stone laid in panels finished with 3 mm (1/8") flooring coat of neat cement or cement and marble dust in 5:1 as specified over and without base including supply of all materials,labour and T&P etc.required for proper completion of the work as per SI No.601
44.64
14508
325
Providing and laying 25 mm thick Kota stone slab flooring over 20 mm thick base of cement morter 1:4(1cement : 4 coarse sand) laid over and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete as per DSR-11.26.1
20.15
33374
1656.3
Providing and fixing 1st quality ceramic glazed wall tiles conforming to IS:15622 (thickness to be specified by the manufacture),of approved make,in all colours,shades except burgundy,bottle green,black of any size as approved by Engineer-in-chage,in skirting,risers of steps and dados,over 12 mm thick bed of cement mortar 1:3 (1cement : 3 coarse sand) and jointing with grey cement slurry @ 3.30kg per sqm,including pointing in white cement mixed with pigment of matching shade complete as per DSR-11.36/8.31
29.03
30107
1037.1
Providing and laying rectified Glazed Ceramic floor tiles of size 300x450mm or more (thickness to be specified by the manufacture),of 1st quality conforming to IS:15622 of approved makein all colours,shades exceptwhite,ivory,Grey,Fume red Brown laid on 20 mm thick cement mortar 1:4 (1cement : 4 coarse sand) including pointing the joints with white cement matching pigments etc. complete as per DSR-11.40
6.78
6390
942.5
Providing and laying vetrified floor tiles size of the 600mm x 600 mm with water absorption less than 0.08% and conforming to IS:15622,of approved make,in all colours and shades,laid on 20 mm thick cement mortar 1:4 (1 cement : 4 coarse sand) including grouting the joints with white cement and matching pigments etc.complet as per DSR.No.11.41.2
32.74
39762
1214.5
Providing and laying vetrified floor tiles size of the 600mm x 600 mm with water absorption less than 0.08% and conforming to IS:15622,of approved make,in all colours and shades in skirting, riser of steps, over 12 mm thick bed of cement mortar 1:3 (1 cement : 3 coarse sand) i jointing with grey cement slurry @ 3.3 kg/ sqm including grouting thejoint with white cement & matching pigments etc. complete as per DSR.No.11.46.2
7.9
9507
1203.5
Providing and fixing of 110 mm dia wall face unplasticised Rigid P.V.C. rain water pipes conforming to IS:13592 Type A,including jointing with seal ring conforming to IS:5382,leaving 10 mm gap for thermal expansion as per DSR-12.41.2
16
5883
367.7
Finishing walls with Premium Acrylic Smooth exterior paint with Silcone additives of required shade on new work (Two or more coats applied @ 1.43 ltr/10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/ 10 sqm) as per DSR.No.13.46.1.
206.16
20409
99
Providing and applying white cement based putty of average thickness 1 mm of approved brand and manufacturer,over the plasterd wall surface even and smooth surface as per DSR-13.80.
449.99
44549
99
Painting or Varnishing new iron work in small areas of new wood work with one coat of ready mixed priming paint and two coat of approved superior quality ready mixed enemel paint of varnish including sand papering,rubbing and cleading the surface and supply of all materials,labour and T&P required for proper completion of the work(the paint to be used should confirm to I.S.I.103-1950) as per SI No 641 & 642
74.68
8364
112
Wall painting with acrylic emulsion paint of approved brand and manufacture to give an even shade:Two or more coats on new work (1st quality (Royal,Silk) Asian/Berger) as per DSR.No.13.60.1
243.83
25845
106
Providing and laying of "brick coba" 12mm thick laid with M-150 class brick bat coba 7.50 cm thick with gap of 15 mm to each other over 20 mm thick base of cement morter 1:4 cement and coarse sand mixed with water proofing compond spreading cement slurry mixed with acrelic cement concrete water proofing compound filled gaps of coba & top of coba morter mixed with water proofing compound in 1:4 cement and coarse sand morter finished smooth & top mashed false square 30 cm x30 cm and side wall parapet shall be monolythic plaster wall up to 30 cm higher and junction and corner shall be rounded by brick ballast cement and coarse sand masonary coba with top finished plaster mixed with acetic water proofing compound @ 2.00% by weight & including supply of all materials,labour T & P etc.required for proper completion of the work.
55.65
58432
1050
S/F of hexagonal fan box with hexagonal side of approx 80 mm in lenth fadricated from 16 SWG M.S.sheet incorporating 10 mm dia M.S.round bar duly bent for supporting fan hanger dully painted with red oxide and screwing arrangement with wiring conduit laid on the RCC roof before concreting along with supply of all materials,labour and T&P etc.for proper completion of work as per SI.No 1149.
6
900
150
SEPTIC TANK
-
-
-
Excavation in foundation in soil (loam,clay and sand) including lift upto 1.50m and lead 30m & including filling,watering and ramming of excavated earth into the trenches into the space between the building and the sides of foundation tenches or into the plinth and removal and disposal of surplus earth as per SI No.251
70.22
8777
125
Add extra to above SI No.251 for every additional lift 1.50 m or every additional lead 50m as per SI No.254
21.08
421
20
Providing and laying in cement concrete 1:4:8 (1 cement :4 coarse sand : 8 graded stone ballast 40 mm nominal size) including supply of all materials,labour and T&P et.required for proper completion of the work and curring complete,also including cost of form work in foundation and floors as per SI No.281.
4.38
34602
7900
Providing and laying in cement concrete 4:2:1 of not less than stength of M-150 stone ballast(20mm nominal size)2 approved coarse sand:1 cement and curing complete including cost of form work in foundation and floors as per SI No.279(b).
0.78
7098
9100
Class-150 brick work in 1:6 cement and coarse sand of 2.25 fineness modulous mortar in foundation and plinth including supply of all materials,labour and T&P etc.required for proper completion of the work as per SI.No.303
5.04
29736
5900
Class-150 brick work in 1:4 cement and coarse sand of 2.25 fineness modulous mortar in foundation and plinth including supply of all materials,labour and T&P etc.required for proper completion of the work as per SI.No.305(b)
14.9
89400
6000
12 mm thick plaster with cement and coarse sand in 1:3 with water proofing compound including supply of all materials,labour and T&P etc.required for proper completion of the work as per SI No.583.
32.4
7458
230.2
RCC work with cement,approved coarse sand and 20 mm gauge approved stone ballast in the proportion of 1:1½:3 in RCC slab excluding the supply of reinforcement and its bending but including its bending,supply of all other materials,labour and T & P as per SI No.284(b)
1.84
19620
10663.3
Mild steel or iron in plain work such as reinforced concrete or reinforced brick work to required shape as necessary including bending for completion of work and including supply of Tor steel its wastage bend hooks and authorised overlapping shall be measured as per SI No.504
1.44
8856
6150
Supply and laying of 40 mm gauge over burnt brick ballast including all materials,labour and T&P etc.for proper completion of the work.
1.34
1956
1460
Providing M.S.foot rest including fixing with 20 x20x10 cm cement concrete block 1:3:6 (1 cement :3 coarse sand :6 graded stone aggregate 20 mm nominal size) as per standard design with 20x20 mm sq.bars.
8
2147
268.45
Providing and fixing 75 mm dia PVC waste and vent pipes as per DSR-17.35.2.1
3.6
2907
807.6
Supply and foxing of 450x450 mm rectanglar C.I.Cover without frame (light duty) the weight of the cover not less than 11.00 kg
4
4280
1070
WAER SUPPLY AND SANITARY WORKS
-
-
-
Making khurars 45x45 cm with average minimum thickness of 5 cm cement concret 1 :2:4 (1 cement :2 coarse sand : 4 graded stone aggregate of 20 mm nominal size) over P.V.C.sheet 1 mx1 mx400 micron,finished with 12 mm cement plaster 1:3 (1 cement :3 coarse sand) and a coat of neat cement,rounding the edges and making and finishing the outlet complet as per DSR-12.22
6
1397
232.9
Providing and fixing White Viterous china Orissa patern W.C.pan of size 580 x 440 mm with integral type foot rests with 100 mm sand cast Iron P or S trap,10 litre low level white P.V.C.flushing cistern,including flush pipe,with manually controlled device (handle lever) conformin to IS:7231,with all fittings and floors complete,including cutting and making good the walls and floors wherever required as per DSR.No.17.1.1
8
32644
4080.5
Providing and fixing White vitreous China flat back wash basin size 550x400 mm with single 15 mm C.P. brass pillar tap with C.I.brackets,15mm C.P.brass pillar taps.32mm C.P.brass waste of standard pattern,including painting of fitting and brackets,cutting and making good the walls wherever require.White Viterous China flat back wash basin size 550x400mm with single 15mm C.P.brass pillar tap as per DSR.No.17.7.4
8
20063
2507.9
Providing and fixing P.V.C.waste pipe 32 mm for sink or wash basin including P.V.C.waste fittings complete as per 17.28.1.1
8
440
55
Providing & fixing 100 mm dia C.P.grating in place of C.I.grating over floor trapes.
19
1452
76.46
Providing and fixing 600x450mm beveled edge mirror of superior glass (of approved quality) complete with 6mm thick hard board ground fixed to wooden cleats with C.P.brass screws and washers complete as per DSR-17.31
8
8637
1079.7
Providing and fixing 110 mm dia P.V.C pipe as per IS:1729 soil,waste and vent pipes:
80
19200
240
Providing and fixing 75 mm dia PVC waste and vent pipes as per DSR-17.35.2.1
80
64608
807.6
Providing and fixing 75 mm dia terminal guard as per DSR-17.56.1.1
8
2112
264
Providing and fixing trap of self cleaninsing design with screwed down or hinged grating with or without vent arm complete,including cost of cutting and making good walls and floors:
8
7365
920.7
Providing and fixing 850 x 20 mm C.P.brass towel rail complete with C.P.brass brackets fixed to wooden cleats with C.P.brass screw as per DSR-17.73.2
8
4400
550
Provding and fixing of 15 mm dia nominal bore G.I.pipes complete with G.I.fittings & clamps including cutting & making good the walls etc.Exposed on wall as per DSR.No.18.10.1
120
23774
198.12
Provding and fixing of 25 mm dia nominal bore G.I.pipes complete with G.I.fittings & clamps including cutting & making good the walls etc.Exposed on wall as per DSR.No.18.10.3
90
25353
281.7
Providing and fixing 15 mm dia nominal bore brass bib cock of approved quality as per DSR-18.15.1
8
2032
254
Providing and fixing 15 mm nominal bore brass stop cock of approved quality
8
2024
253
Providing and fixing gun metal gate valve 25 mm dia with wheel of approved quality
8
8160
1020
Provding and fixing of 15 mm dia nominal bore 450mm long uplasticised PVC connection pipe with brass unions as per 18.21.2.1
16
1200
75
Providing and fixing C.P.brass shower rose with 15 or 20 mm inlet 100 mm diameter as per DSR-18.22.1
8
3600
450
Providing and placing on terrace (at all floor levels) polyethylene water storage tank of approved brand and manufacture with cover and suitable locking arrangement and making necessary holes for inlet outlet and over flow pipes but without fittings and base support for tank
16000
144000
9
Providing and fixing CP brass long body 15 mm nominal bore dia bib cock of approved quality conforming to IS standards and weighting not less than 690gms.
8
4704
588
Providing and fixing CP brass angle valve 15 mm dia for basin mixer and gyser points of approved quality conforming to IS 8931.
16
7568
473
Providing & fixing 125 mm nominal dia circular type with 25 mm waste hole grating of approved quality and colour as per DSR-18.58.1.2
8
680
85
Providing,laying and jointing 100 mm dia glazed stoneware pipes class SP-1 with stiff mixure of cement mortar in the proportion of 1:1 (1 cement : fine sand) including testing of joints etc.complete.
60
16758
279.3
Providing and laying cement concrete 1:5:10(1 cement :5 fine sand:10 graded brick aggregate 40 mm nominal size) all -round 100 mm dia S.W.pipes including bed concrete as per standard design as per DSR-19.2.1
60
61605
1026.75
Constructing masonry manhole in cement mortar 1:4 (1 cement:4coarse sand) with with RCC top slab with 1:2:4 mix(1 cement:2 coarse sand:4 graded stone aggregate 20 mm nominal size),fondation concrete1:4:8 (1 cement :4 coarse sand :8 graded stone aggregate 40 mm nominal size) inside plastering12 mm thick with cement mortar 1:3 (1 cement :3 coares sand ) finished with a floating coat of neat cement and making channels in cement concrete 1:2:4 (1 cement:2 coarse sand:4 graded stone agggregate 20 mm nominal size) finished with a floating coat of neat cement complete as per standard design:
-
-
-
Inside size 750x750x750 mm dimensions
2
18510
9255.1
Constructing masonry manhole in cement mortar 1:4 (1 cement:4coarse sand) with with RCC top slab with 1:2:4 mix(1 cement:2 coarse sand:4 graded stone aggregate 20 mm nominal size),fondation concrete1:4:8 (1 cement :4 coarse sand :8 graded stone aggregate 40 mm nominal size) inside plastering12 mm thick with cement mortar 1:3 (1 cement :3 coares sand ) finished with a floating coat of neat cement and making channels in cement concrete 1:2:4 (1 cement:2 coarse sand:4 graded stone agggregate 20 mm nominal size) finished with a floating coat of neat cement complete as per standard design:
-
-
-
Inside size 900x900x900 mm dimensions
1
7496
7496.5
Constructing masonry manhole in cement mortar 1:4 (1 cement:4coarse sand) with with RCC top slab with 1:2:4 mix(1 cement:2 coarse sand:4 graded stone aggregate 20 mm nominal size),fondation concrete1:4:8 (1 cement :4 coarse sand :8 graded stone aggregate 40 mm nominal size) inside plastering12 mm thick with cement mortar 1:3 (1 cement :3 coares sand ) finished with a floating coat of neat cement and making channels in cement concrete 1:2:4 (1 cement:2 coarse sand:4 graded stone agggregate 20 mm nominal size) finished with a floating coat of neat cement complete as per standard design:
-
-
-
Inside size 600x600x600 mm dimensions
1
3938
3938.8
INERNAL ELECTRICAL WORKS
-
-
-
SUB HEAD I - INTERNAL WIRING
-
-
-
Wiring points for light with 1.5 sqmm.FR PVC insulated multistrand single core copper condutor cable in PVC conduit pipe partly concealed in wall and partly laid in slab along with the reinforcement before concreting, complete with 1.5 sqmm.FR PVC insulated multistrand copper conductor cable as earth continuity wire and piano type switch etc. complete in all respects as per SI.No.138(c).
109
66490
610
Wiring points for two ways light with 1.5 sqmm.FR PVC insulated multistrand single core copper condutor cable in PVC conduit pipe concealed in wall and partly laid in slab along with the reinforcement before concreting ,complete with 1.5 sqmm.FR PVC insulated multistrand copper conductor cable as earth continuity wire and piano type switch etc. complete in all respects as per SI.No.139(c).
8
6328
791
Same as item No.(1) but for fan and light duty exhaust fan as per SI.No.140(c).
36
24156
671
Same as item No.(1) but for 5 amp plug point with piano type switch and socket etc as per SI.No.141(c).
42
13734
327
Same as item No.(1) but for Exhaust fan point using 1.5 sq.mm FR PVC insulated wireh as per SI.No.144(c).
12
10716
893
Add for light /fan points with modular type switch in place of piano type switch. as per SI.No.187(A)
145
6380
44
Add for two way light points with modular type switch in place of piano type switch as per SI.No.187(B).
8
1320
165
Add for plug points with modular type switch in place of piano type switch as per SI.No.187(C)
42
3486
83
Supply and wiring of submain 2 number 1.5 sqmm . FR PVC insulated 1100 V grade multistranded single core copper conductor cable in heavy duty 20mm dia PVC conduit partly concealed in wall and partly laid in slab along with one number 1.5 sqmm FR PVC insulated multistranded copper conductor cable as earth contunity wire etc. complete in all respects as per SI.No.1313(C)
575
60375
105
Supply and wiring of submain 2 number 2.5 sqmm . FR PVC insulated 1100 V grade multistranded single core copper conductor cable in heavy duty 20mm dia PVC conduit partly concealed in wall and partly laid in slab along with one number 1.5 sqmm FR PVC insulated multistranded copper conductor cable as earth contunity wire etc. complete in all respects as per SI.No.1307(c).
445
53845
121
Supply and wiring of submain 2 number 4 sqmm . FR PVC insulated 1100 V grade multistranded single core copper conductor cable in heavy duty 20mm dia PVC conduit partly concealed in wall and partly laid in slab along with one number 2.5 sqmm FR PVC insulated multistranded copper conductor cable as earth contunity wire etc. complete in all respects. as per SI.No.221(c).
347
51703
149
Supply and wiring of submain 4 number 16 sqmm . PVC insulated 1100 V grade single core copper conductor cable in heavy duty 40 mm dia PVC conduit concealed in wall along with two number 10 sqmm single core copper conductor cable as earth contunity wire etc. complete in all respects as per SI.No.274(c).
148
108040
730
SUB HEAD II - INSTALLATION OF LIGHT FIXTURES AND FANS
-
-
-
Erection and testing of ceiling fan and regulator for room height upto 3.5mts. including supply of 3mm thick G.I. down rod 19mm dia duly painted, complete in all respects as per SI.No.1116
36
5040
140
Erection and testing exhaust fan on the exhisting hole with suitable size of rag bolts nuts and washers etc. complete in all respects as per SI.No.1120..
12
2340
195
Supply and fixing of LED Tube light with batten suitable for up to 1 x 22 watt LED Tube light fitting including tube on surface complete in all respect. CAT-AAA as per SI.No.1413
36
42840
1190
Supply & fixing of 12 watt LED Bulb, 1-Star rating, suitable for Batten/ Angle holder including making connection. Complete in all respect.
73
10453
143.2
Supply and erection of BEE 5 star 1200 mm sweep ceiling fan with fan motor of A.C.Permanent insulation,capacitor rating conforming BEE 5 Star rating and IS:374/79mand also comply with IS:1709/1984 with latest amendment.The rated voltage 220/240 volts,50 Hz,1-ph AC the fan assemble should consists of down rod blades,shackle canopies etc and with double ball bearing system as per SI.No.1501(i).
36
64800
1800
Supply and erection of 300 mm sweep AC 230/250 Volts, 50 Hz exhaust fans including providing nuts, bolts, mounting frame and other accessories including connections etc. complete as required
12
17695
1474.6
SUB HEAD III - DISTIBUTION BOARD
-
-
-
Construction of recess 600x480x200 mm. size distribution board of all sizes including cutting of brick work providing lintel of suitable size & thickness plastering etc. with supply of all materials, labours, T & P etc. required for proper completion of work as per SI.No.1141(B).
12
7800
650
Supply and fixing of factory fabricated 600x480x200 mm. size M.S. box in existing sunk with Godrej type almirah cover with handle etc. fabricated from 18 SWG M.S. sheet duly painted with red oxide primer followed by two coats of synthetic enamel paint complete with necessary conduit entry and DP/TPN; fixing arrangement and provision for compartment for loose wires, openable housing on the top and hold fast etc. including supply of all material, labour and T & P etc. required for proper completion of the work as per SI.No.1147
12
20640
1720
Supply and fixing of 6 Way TPN flush/surface mounting distribution boards complete in all respects as per SI.No.1027(A) CAT B.
12
39000
3250
Supply and fixing of 5 - 32 amps. flush/surface mounting distribution boards complete in all respects as per SI.No.1002 CAT A.
86
22360
260
Supply fixing and making of 40 Amp. 4 Pole MCB connection of following FPMCBS complete in all respects as per direction and satisfaction of engineer-in-charge.
12
20640
1720
Supply and fixing of 80 to 100 Amp 4 pole MCCB (16 KA) Thermal magnetic release as per SI.No.1021(A).
6
37800
6300
Supply and fixing of power plug with 15A/250 V flush type switch and 3 Pin 15 A/250V flush type socket in suitable M.S. box of 175mmx100x50mm size Switch bakellite sheet cover 3mm thick fixed with brass machine screws and cup washer. as per SI.No.1139
44
14960
340
Supply & fixing of Sheet Steel Enclosure Surface/ Flush Mounting fitted With 20/32 Amp. 2Pin and earth metal clad scraping earth plug and socket complete in all respects as per direction and satisfaction of engineer-in-charge. as per SI.No.1031(A).
9
31050
3450
Supply and fixing Single Pole MCBS Blanking Plate complete in all respects as per SI.No.1034(b)
8
200
25
Supply & fixing of Sheet Steel Enclosure Surface/ Flush Mounting fitted With neutral link and earth terminal. complete in all respects as per direction and satisfaction of engineer-in-charge as per SI.No.1033 CAT A.
8
6800
850
SUB HEAD IV - EARTHING
-
-
-
Supply and burring of safe earthing electrode T-39 (Hot-Dip Galvanized), length up to 3000 mm, outer pipe 76 mm inner dia 38 mm terminal dia 12 mm , outer G.I. pipe of 16 SWG and inner G.I. pipe of 12 SWG with Hot Dip Galvanization up to 100 micron filled with crystalline conductive mixture (CCM) having anti corrosive & conductive property with 50 kgs activated soil (BFC) capable of reducing the soil resistivity with good mixture pf retaining capacity along with 30 cm square C.I. frame with hinged cover & masonary housing.(From electrode terminal to switch board, cost of 25x3 G.I. Strip will be extra) as per SI.No.725(d)
4
50800
12700
Supplying & Laying of 25mmx3mm G.I. Strip for earthing purpose as required complete in all respects as per SI.No.716.
40
3600
90
Supply & fixing of two number 8 SWG G.I. wire for earthing purpose as required complete in all respects as per SI.No.723.
40
8400
210
SUB HEAD V - L.T PANELS
-
-
-
Supply & Erracetion of factory fabricated & wired metal clad dust and vermin proof floor mounting, M.S. Channel base with bottom and top cable entreis Electrical control panel with TPN MCCB's ( Foue pole 36 KA with thermal magnatic release) switches complete and instrument chamber shall be seperate and shall comprise of flush type digital metering system for phase to phase voltage and single phase voltage, current and other parameters (KVA,P.F.,KW etc.) in each phase with touch type selector switches for different readings, instrument fuses, current transformer etc. The panel board shall have suitable capacity electrolytic aluminium busbars as per IS: 8623 or above insulated with heat shrink sleeving and mounted on non hygroscopic supports such as CMC/BMC supports with deteachable side covers and shall be suitable for extension on the sides. The MCCB's shall be complete with suitable cable and boxes, compression glands and indicating lamp on incoming etc as per SI.No.812 (C)
-
-
-
Incoming
-
-
-
200 Amp. MCCB-1 No.
-
-
-
Outgoing
-
-
-
Phase indication lamp on each outgoing to be provided
-
-
-
100 Amps MCCB -1No
-
-
-
63 Amps MCB -3No
-
-
-
63 Amps MCCB -1No Spare
1
138070
138070
SUB HEAD-VI UNDER GROUND CABLES
-
-
-
Supply and laying of aluminium conductor PVC insulated armoured served sheathed cables 1100 Volts grade at a depth 750 mm below ground level over a cushion of 75 mm thick sand all around and protected with burnt bricks on sides and top On surface the cable run shall be fixed on M.S. Clamps etc. of suitable size or as directed by Engineer-in-charge, complete in all respect. The armouring of the cable shall be properly connected with the earth conductor by clamps etc as per SI.No 501(a)
-
-
-
6 sq.mm 2 core
10
2760
276
As in above Item no.(1) but 35 sq.mm 3-1/2 core as per SI.No.501(k)
38
16036
422
As in above Item no.(1) but 95 sq.mm 3-1/2 core as per SI.No.501(n).
42
29400
700
Supply and fixing of brass nickle plated compression gland for PVC insulated & armoured served sheathed, underground cable including rubber ring etc. complete in all respect. The armouring of the cable shall be properly connecteced with the earth as per direction of Engineer-in-charge as per SI.No.503(a)
-
-
-
95 sq.mm 3-1/2 core
4
304
76
SSupply and fixing of plain or pin type copper tin plated cable socket ( lug ) to the cable leads, insulating with tape and making connection etc. complete in all respect as per direction of Engineer-in-charge as per SI.No.504(g)
4
192
48
As in above item no.( 4 ) but 95 sq.mm as per SI.No.504(i)
12
1056
88
C.C.ROAD
-
-
-
Excavation in foundation in soil (loam,clay and sand) including lift upto 1.50m and lead 30m & including filling,watering and ramming of excavated earth into the trenches into the space between the building and the sides of foundation tenches or into the plinth and removal and disposal of surplus earth as per SI No.251
9
1125
125
Earth filling in plinth including supplly of necessary quantity of earth and embankment to be in 200 mm layers including the ramming and dressing the surface to required levels directed by E/I including proper completion of the work including Royalty as per SI.No.253.
37.5
7413
197.7
Providing and laying in cement concrete 4:2:1 of not less than stength of M-150 stone ballast(20mm nominal size)2 approved coarse sand:1 cement and curing complete including cost of form work in foundation and floors as per SI No.279(b).
22.5
204750
9100
Providing and laying in cement concrete 1:4:8 (1 cement :4 coarse sand : 8 graded stone ballast 40 mm nominal size) including supply of all materials,labour and T&P et.required for proper completion of the work and curring complete,also including cost of form work in foundation and floors as per SI No.281.
17.25
136275
7900
Class-150 brick work in 1:4 cement and coarse sand of 2.25 fineness modulous mortar in foundation and plinth including supply of all materials,labour and T&P etc.required for proper completion of the work as per SI.No.305(b)
5.29
31740
6000
12 mm thick plaster cement and coarse sand of 2.25 finenss modulous mortar in 1:4 upto plinth including supply of all materials,labour and T&P etc.required for proper completion of the work as per SI.No.584.
23
3197
139
2.50 cm(1") thick 1:2:4 plain cement concrete floor with cement approved coarse sand and 20 mm (¾") graded approved stone laid in panels finished with 3 mm (1/8") flooring coat of neat cement or cement and marble dust in 5:1 as specified over and without base including supply of all materials,labour and T&P etc.required for proper completion of the work as per SI No.601
23
7475
325
Providing and laying of 125 micron thick Polythene sheet under C.C.Road as per direction of engineer in charge.
150
6000
40
Making Contraction joint / Expension Joints in C.C.Road with 0.80kg bitumen and 0.0025 cum coarse sand including supply of all materials,labour and T&P for proper completion of the work as per direction of engineer in charge.
48
1848
38.5
S/F of Informatory sign board 90x120 cm.size & 3.00 meter long made with angle iron 40x40x5 mm. 18 gauge MS sheet and braud with flat iron 35x5 including two coat painting with red oxide cartage upto stone complete with all laboursmaterial and T&P as per standard design and drawing supplied by department
1
5600
5600
FIRE FIGHTING SYSTEM(INTERNAL)
-
-
-
Supply and fixing of fire extinguisher, ABC Type 4.00 kg. capacity (ISI Marked IS : 15683 & TAC approved) complete with initial charge and wall bracket, along with supply of all materials and labour for proper completion of work. As PWD Electrical Shedule-2018, Sl-1131
8
62880
7860
Supply and fixing of Co₂ Type fire extinguisher 4.5 kg. capacity (ISI Marked IS : 2878 & TAC approved) complete with initial charge and wall bracket, along with supply of all materials and labour for proper completion of work. As PWD Electrical Shedule-2018, Sl-1132
24
287520
11980
Evaluation Notes How It Works ?
Potential Partner
Select Your Requirements