Rajya Krishi Utpadan Mandi Parishad Tender

M-150 Brick work in 1:6 cement & Sand in super structure including necessary cutting and moulding one brick wall for extra labour (S.I.No. 303+309+310)

M-150 Brick work in 1:4 one Cement and six coarse for supper structure for one brick thick wall. including supply of all material labour and T&P etc. required for proper completion of the work (S.I. No. 305 + 309+ 310)

Same as above item no above but Brick work in 1:3 and coasre sand mortar for half brick thick wall in super structure. including supply of all material labour and T&P etc. required for proper completion of the work (S.I. No. 308 + 309+ 310a)

R.C.C. work with cement approved coarse sand 2 cm. gauge approved stone ballast in proportion of 1:2:4 in lintel of doors and windows excluding its fixing and bending the same with 24 BWG GI Binding wire and including necessary centring and shuttering etc. and also including of the materials required for proper completion of the work binding wire to be supplied by contractor free of cost. (S.I. No. 283)

R.C.C. work with cement, approved coarse sand and 2 cm gauge approved stone grit in proportions of 1:2:4 in slab excluding supply of reinforcement and its bending, but including its fixing and binding wire and including necessary centering & shuttering etc. (S.I. No. 284)

Supply & Fixing of Rolling Shutters of approved make made of 80x125 mm cold rolled MS lath inter locked throughout their length and jointed together at the end by end locks end mounted on specially designed pipe shaft with brackets, side guides and arrangements for inside and outside locking with push & pull operation complete. (S.I. No. 520)

M.S. Iron work in steel Z section window exculuding galss panes shall be openable panenls and also including wastage fixing proper completion of the work, (SI No. 502 B)

Mild steel & Iron Work in heavy sizes such as trusses built up gates door trances records racks roof work gates etc. wrought to required from including drilling holes reveting or welding where necessary and also including supply of steel bolts nuts and wastages and their fixing required for completion of the work. (S.I. No. 503)

Mild steel or Iron work in plain work such as reinforced concrete or reinforced brick (when not including in over all rates wrought to required shape and also including supply of steel and wastages and over lapping and hooks required for completion of the work. (S.I. No. 504)

S/F of 32 mm. thick sitapur ply door including stopper, hings all complete. As per sanctioned rate HQ

Oxidized Iron Fiting on above door including all complete. As per sanctioned rate HQ

Filling of carted earth in trenches, plinth and sides of foundation etc. in lavers not exceeding 20cm. in depth consolidating each deposited layer by ramming & watering and dressing and including cartage of earth upto 5.00km and all taxes required for proper completion of the work. . (AOR)

Sand filling in plinth including supply of necessary quantity of sand from a distance not exceeding 8km from the site of work and including watering dressing etc. Rate to include cost of all materials, labour and T&P etc. required for proper completion of the work. (SI No. 255)

12 mm. Thick plaster with cement and coarse sand mortar in proporation of 1:4 minimum thickness not to be less than 10 mm. including supply of all materials labour T & P etc. required for proper completion of work.SI No(S.I. No.584)

12 mm. Thick plaster with cement and coarse sand mortar in proporation of 1:6 minimum thickness not to be less than 10 mm. including supply of all materials labour T & P etc. required for proper completion of work.SI No(S.I. No.586)

Providing and laying "Brick Coba" 12 mm thick laid with M-150 class brick bat coba 7.50 cm. thick with gap of 15 mm to each other, over 20 mm thick base of cement mortar 1:4 cement and coarse sand mixed with water profing compound spreading cement slurry mixed with aerlic cement concrete water proofing compound filled gaps of coba & top of coba mortar mexed with water proofing compound in 1:4 cement and coarse sand mortar finished smooth & top mashed false square 30 cm. x30 cm. and side wall parapet shall be mono tythic plaster eall upto 30 cm. higher and junction and corner shall be round by brick ballast cement and coarse sand masonary coba with top finished plaster mixed with acetic water proofing compound @ 2% by weight & including S/o all materials, labour T&P etc. complete for proper complection of work. Chap 11 S.I. No. new item No. 04 (as per Sanctioned Rate HQ).

4.00 Cm thick P.C.C.floor 1 : 2 : 4 with cement approved coars sand and 20 mm. graded approved stone led in pannels without base concrete including all material labour T. & P. completion of work. As per S.I. No. 605.

2.50 C.M thick Damp proof course with cement and approved, coarse sand 1:2 with and including water proofing as ordered, by E/I in the proportio as spefied by the manufacturer including supply of all material labour and T&P etc. required for proper completion of the work and including proper curing & shutterings as necessary. (S.I. No. 361) (as per sanctioned rate HQ)

Providing & fixing glass stips of 3.15 mm.(1/8") thickness in joints of floors & skirtings at the time of laying floors flush with leavel, including labour and T & P etc.complete. For 35 mm. depth. S.I.No.631.

Supply of 80 mm thick precast cement concrete and fly ash I-shape" interlocking paver blocks ISI mark confirming to IS: 15658-2006 with top layer of minium 8 mm thickness having plan dimension 200x(160+120 mm) of O.P cement, smooth high gloss finish, skid resistant, manufactured from, rubber moulds through vibro-compression mechanism. The compressive strength of concrete paver block shall not be less than 30 MPa (3-30) and weigt 4.5 kg per including cost of materials, with a blanket layer of 4.00 cm. thick fine sand, including labour, T&P etc, required for proper completion of the work. NS-1 Page 60

Painting & Varnishing or Iron Work on In small size or on new wood work with one coat of ready mixed priming paints and one coat of approved superior quality ready mixed paint of elder synthetic varnishing including supply of all materials L T&P etc. required for proper completion of the work. (S.I. No. 641+642)

White washing three coat including scrapping supply of all materials Labour T&P etc. SI No. 673.

Finnishing wall with two coat waterproof cement paint of approved quality of New treatedsurface with this paint to given an even shade including scrapping old coloue washetc. Required for proper complition of the work. As per SI No.660+661+NBO 13.07 page 20

Providing and mixing of water proofing compound (Impermo/mec) in cost cement concrete at plinth level bend (SI No. 599)

Providing and injecting chemical emulsion for treatment of soil under apron along external perimeter 5 liter per sqm as per sanctioned rate HQ)