Public Works Department Tender

Providing and laying of hot applied thermoplastic compound 2.5 mm thick including reflectorising glass beads @ 250 gms per sqm area, thickness of 2.5 mm is exclusive of surface applied glass beads as per IRC:35 .The finished surface to be level, uniform and free from streaks and holes

TRAFFIC SIGNS - SPEED LIMIT Providing and fixing of retro-reflectorised cautionary, mandatory and informatory sign (60cm circular) as per IRC:67 mad of high intensity grade sheeting vide clause 801.3, fixed cover aluminium shting, 1.5 mm thick supported on a mild steel angle iron post 75 mm x75 mm x6 mm firmly fixed to th ground by means of properly dsignd foundation with M-15 grade cment conc. 45 cm x 45 cm x 60 cm, 60 cm below ground lvel as per approved drawing Chap-26, Item No. 18(iii)

TRAFFIC SIGNS - JUNCTIONS BOARD Providing and fixing of retro-reflectorised cautionary, mandatory and informatory sign (90cm triangular) as per IRC:67 mad of high intensity grade sheeting vide clause 801.3, fixed cover aluminium shting, 1.5 mm thick supported on a mild steel angle iron post 75 mm x75 mm x6 mm firmly fixed to th ground by means of properly dsignd foundation with M-15 grade cment conc. 45 cm x 45 cm x 60 cm, 60 cm below ground lvel as per approved drawing

TRAFFIC SIGNS - SPEED TABLE Providing and fixing of retro-reflectorised cautionary, mandatory and informatory sign (90cm triangular) as per IRC:67 mad of high intensity grade sheeting vide clause 801.3, fixed cover aluminium shting, 1.5 mm thick supported on a mild steel angle iron post 75 mm x75 mm x6 mm firmly fixed to th ground by means of properly dsignd foundation with M-15 grade cment conc. 45 cm x 45 cm x 60 cm, 60 cm below ground lvel as per approved drawing

TRAFFIC SIGNS - HAZARD MARKER Providing and fixing of retro-reflectorised cautionary, mandatory and informatory sign (60x45cm) as per IRC:67 mad of high intensity grade sheeting vide clause 801.3, fixed cover aluminium shting, 1.5 mm thick supported on a mild steel angle iron post 75 mm x75 mm x6 mm firmly fixed to th ground by means of properly dsignd foundation with M-15 grade cment conc. 45 cm x 45 cm x 60 cm, 60 cm below ground lvel as per approved drawing

Providing and erecting a "W" metal beam crash barrier comprising of 3 mm thick corrugated sheet metal beam rail, 70 cm above road/ground level, fixed on ISMC series channel vertical post, 150 x 75 x 5 mm spaced 2 m centre to centre, 1.8 m high, 1.1 m below ground/road level, all steel parts and fitments to be galvanised by hot dip process, all fittings to conform to IS:1367 and IS:1364, metal beam rail to be fixed on the vertical post with a spacer of channel section 150 x 75 x 5 mm, 330 mm long complete as per clause 810

Aluminum backed flexible prismatic sheet Aluminum backed flexible prismatic sheeting shall be made of yellow coloured flexible prismatic sheeting with non metallic presmatic lens formed in a transparent, synthethic resin as rectro reflective elements. This flexible preismatic sheeting shall have black & yellow strips with aluminium backed flexible prismatic type-VI sheeting conforming to ASTM: D4956. specifications and standards of coefficient of retro reflectivity, flexibility and impact resistance applicable for reboundable devices. This flexible prismatic sheeting shall have screen printed arrow/slant line pattern in black colour in a continuous roll format width of object marker shall be 300mm. The rate shall include all materials, labour, T&P, transportation, installation and incidentals all complete as per direction of the Engineer-in-charge

TRAFFIC SIGNS (Accident prone area)- Providing and fixing of retro-reflectorised cautionary, mandatory and informatory sign (60x45cm) as per IRC:67 mad of high intensity grade sheeting vide clause 801.3, fixed cover aluminium shting, 1.5 mm thick supported on a mild steel angle iron post 75 mm x75 mm x6 mm firmly fixed to th ground by means of properly dsignd foundation with M-15 grade cment conc. 45 cm x 45 cm x 60 cm, 60 cm below ground lvel as per approved drawing

Suppy & Fixing of pavment Makers (Cat Eye) Type X-ASTMD-4956-04 Avery Dennison/3-M (USA Make) consisting of ASA plastic housing fitted with tightly aderent plotting compound. The housing shall contain prismatic two glass coverd prismatic reflective face to reflect light I/C all tax

Class-150 (Non Modular) brick work in 1:3 cement and Coarse sand mortar in foundation and plinth including supply of all materials, labour and T&P etc. required for proper completion of the work. But super structure

12mm Cement plaster with cement mortar in proportion of 1:3 cement & coarse sand of single coat for interior plastering upto floor two level including internal rounded angles chamfers, and rounded angles not exceeding 80mm in girth and finished even and smooth

Supply & Laying of I shaped precast Interlocking tiles of thickness 60 mm (Ordinary Grey) (Compressive strength not less then 30Mpa and weight 4.50kg) Including 25mm thick local sand base levelling and dressing of surface to required level and slope, filling joints with local sand all complete work

Earth work in cutting or in embankment in ordinary soil excavation to be in the form of a regular pits not exceeding 0.50m in depth and earth work in embankment to be in 20cm layers including ramming and dressing the surface to required levels and slopes and also including 1.5 m lift and 30m lead. The earth in form of cutting to be used as spoil banks within 50m distance as directed by the Engineer-in-Charge

Brick soling with straight over burnt brick laid flat and dry brick edging on both side including preparation of subgrade to required camber and including supply of bricks, filling joints with local earth spreading a blind coat of 1cm(3/8") depth of local earth P.I. 5 to 7 or sand over the entire surface and including labour & T&P etc. required for proper completion of work

Conditions:- SCHEDULE - “C” 1-   Bitumen V.G.-10 shall be issued from the central store CD-3, PWD, Mainpuri at Stock issue rate at the time of issuing the material from the store and the bitumen will be recovered from the contractor's bill at the stock issue rate or market rate whichever is maximum. 2- Emulsion if available shall be issued from the central store CD-3, PWD, Mainpuri at Stock issue rate at the time of issuing the material from the store. 3-     There shall be no claim of contractor, if the material is not issued by the department due to non-availability in store or any other reason. 4-     The unconsumed material issued in excess of bonafide consumption norms, shall have to be returned back to the store as mentioned above, failing which a recovery at the Penaltative rate, i.e., double the issue rate shall be made from the contractor’s bill. 5-     Contractor have to return empty bitumen drums / emulsion drums immediately, failing which a recovery at the punitive rate i.e., Rs. 3000 per drum shall be recovered from the contractor’s bill. 6-     The departmental road roller if spare, shall be made available to the contractor at site @ Rs. 2450 per day including POL charges, wages of driver and cleaner. If roller is kept idle due to non-availability of material or labour, recovery @ Rs. 2450 per day shall be made from contractor’s bill for idle period. 7- All material should be purchased from approved quarry