Public Works Department Tender

Same as Item No 1 but for Plug point P.S.No.141( C )+187( C)

S/F of Power Plug with 20 A/250 Volt flush type modular Switch & 5 pin 20 A/250 Volt flush type universal modular socket switch on conclead M.S. box including supply of all mterial labour etc. P.S.No.1139(A)

Supply& Erracetionof factory fabricated& wired metal clad dust and vermin proof floor mounting,M.S. Channel Base with bottom and top cable entreis,Electrical control panel with TPN MCCB's (Four Pole 36 KA with thermal magnatic release)Switches Complete and instrument chamber etc.complete in all respects. The instrument chamber shall be separate and shall comprise of,flushtypedigitalmetering system for phase to phase voltage and singlephase voltage, current and other parameters(KVA,P.F,KW etc) in each phase with touch type selector switches for different readings, instrument fuses, current transformer etc. The panel board shall have suitable capacity electrolytic alumininum busbars as per IS8623 or above istulated with heat shrink sleeving and mounted on non hygroscopic supports such as CMC/BMC support with deteachable side covers and shall be suitable for extensionon the sides. The MCCB's shall be complete with suitable cable end boxes, compression glands and indicating lamp on incoming etc.The Job includes the grouting of the board as per directions of Engineer-in charge. All out goings of 100 Amp and above shall have an Ammeter. The panel board shall be fabricated with CRCA sheetwithaminimumthicknessof1.6mm/2mm.Cubicle type switch board shall be of cat A & B Only.Incomming 200Amp MCCB- 1No. & Outgoing 100Amp MCCB-1No CAT - (B) Pannel Cubicle Type P.S.No.812(a)ii

S/F of 200 Amp. 4 pole change over switch on 50 mm x 50 mm x 6 mm angle iron frame including the cost of labour t & p painting and other material required for proper completion of the work as per direction and satisfaction of Engineer in Charge.P.S.No.379

S/f of surface/flush mounting 4 way TPN DB with additional matel door without MCB Complete in all respect.P.S.No.1026 CAT A

S&F OF 63 Amp 4 pole MCB ( 10 KA ) P.S.No.1020 (A) CAT (A)

S&F surface/flushmounting 12 ways SPN distributionboard withadditional metal door without MCB complete in all respect, asdirected by Engineerin charge. P.S.No.1025(A) CAT (A)

S/f of 63 A.DP MCB (10 K ) P.S.No.1011CAT ( A )

S/f of 6 to 32A SP MCB(10kA)cbcurve P.S.No.1002 CAT ( A )

Supply and fixing of recess/Surface mounting round 15 Watt to 18 Watt , Cut out Min 150mm, Height Min 40mm,, LED Down Lighter having Powder coated die cast aluminium housing with heat sink, diffuser/ Reflector and driver set, suitable for 24Hr Continuous Operation, Compelete in all respect.1980-2200 system lumens, 110lm/W, PF0.95, THD 10% at full load, CRI80, with 5 year warranty P.S.No.1403 cat-AAA

Supply and fixing of water tight oblong 10 watt LED Bulkhead luminaire having die cast housing with driver set confirming to IP65 and above protection complete in all respect.CAT-AAA 1100 system lumens,110lm/W,PF0.95,WITH 5 years warrantee P.S.No.1417

Supply and fixing of LED Tube Light with Metal heavy duty Box type batten Light fitting 1x22 watt suitable for upto 1x 22 watt LED Polycarbonate tube light complete Including tube suitable for both surface & suspended complete in all respect 2420 system lumens 110 lm/w PF0.95, THD10%, CRI80, Sheet Thickness 0.8mm, Tube with aluminium heat with 5 year warranty P.S.No.1413 CAT-AAA

Supply and fixing of LED Street light Fitting with mandatory driver set having die cast aluminium body and lenses suitable for 75Watt. to 90 Watt and Confirming to IP66 protection having Company LOGO Engraved complete in all respect including Labour. 8250-9900 system lumens High Power LED with lenses, 110lm/W, PF0.95, THD 10% at full load, CRI70, , Potted driver Set (NotCircuitory) Phase to phase Protection at 440V & 300V auto cut and re-start feature, with 5 years warrantee P.S.No.1423CAT AAA

S/W of submain with 4 number 25 sqmm pvc insulated 1100volt grade single core copper conductor cable in 50mm dia pvc conduit concealed in wall ,with two number 16sqmm singal core copper conductor cable as earth continuity wire drawn in coundit including matching colour wash etc, complete in all respect. P.S.No.280( C )

S/W of submain with two number 10 sqmm PVC insulated 1100v grade multistrand single core copper conductor cable in 25mm dia PVC conduit in wall. P.S.No.218( C)

S/w of submain with two no 4 Sq mm FRLSH PVC insulated 1100 V grade multi stand single core copper conductor cable in 20 mm dia pvc conduit concealed with 2.5 sq mm one no FRPVC insulated multistrand single core cu. conductor cable as earth wire complete in all respect P.S.No.216 ( C )

S/w of submain with two no 2.5 Sq mm FRLSH PVC insulated 1100 V grade multi stand single core copper conductor cable in 20 mm dia pvc conduit concealed with 1.5 sq mm one no FRPVC insulated multistrand single core cu. conductor cable as earth wire complete in all respect P.S.No.1304 ( C )

Supply and laying of aluminium conductor PVC insulated armoured served shaethed cables 1100 Volts garde at a depth of 750 mm below ground level over a cushion of 75 mm thick sand all around and protected with burnet bricks on sides and on top. On surface the cable run shall be fixed on M.S, Clamps etc of suitable size or as directed by the Engineer -incharge,complete in all respect.The armouring of the cable shall be properly connected with the earth conductor by clamps etc (a)35 sq mm 3-1/2 core P.S.No.501(k)

Supply and fixing of brass nickle plated compression gland for PVC insulated & armoured served sheathed,underground cable including rubber ring etc. complete in all respect.The armouring of the cable shall be properly connected with the earth as per direction of Engineer -Incharge. (a) 35 sq mm 3-1/2 core P.S.No.503(k)

Supply and fixing of plain or pin type copper tin plated cable socket(lug) to the cable leads,insulating with tape and making connection etc . Complete in all respect as per direction of the Engineer -Incharge (a) 35 Sq mm P.S.No.504(f)

(b) 25 sqmm P.S.No.504( E)

S/B of safe earthing electrode T-19 Zn-Zinc Coated Length 300 mm , outer pipe 48.4mm X 3.2mm ,inner pipe 26.9mmX2.6, terminal dia 12mm coating 80-100 micron or as per ps. P.S.No.726 B

S&L of 25 mm X 3 mm G.I. Strip from earth electrod in the ground as required complete in all respect P.S.No.716

S&F of Electronic Fan Regulater(Modular)120-280 V ISI marked,on the existing switch board including making connection,required material,labour T&P etc.for proper completion of work to the satisfaction of Engineer in charge. P.S.No.1203 ( C )

S/F danger board fabricated from 10 gauge M.S.sheet as per I.E. Rules. P.S.No.1109

Add for Invertor Wiring in wiring Point for light/ Fan/ Plug with 1.5 mm Cu Wire P.S.No.189A

Supply and fixing hexagonal Round G.P.fan box approved make made up of 1.0 mm thick ISI Marked G.P.sheet spot welded Four to Eight holes for pipe entry of the box. Holes should be semi-shuttered type with 0.5 mm G.P. Sheet made upper & lower cover duly screwed. Fixing with wiring conduit laid in the R.C.C. roof before concreting alongwith supply of all material, labour, T&P etc. required for proper completion of the work. P.S.No.1149

Supply of Ceiling Fans with fan motor of A.C Permanent insulation, capacitor rating conforming BEE 5 Star rating and IS:374/79 and also comply with IS:1709/1984 with latest amendment. The rated voltage 220/240 volts, 50Hz,1-ph AC the fan assemble should consists of down rod blades, shackle canopies etc and with double ball bearing system P.S.No.1501

S/F of Fire Extinguisher ABC Type 6.00 kg capacity complete with initial charge and wall bracket along with supply of all materials and labour for proper completion of work. P.S.No.1131 A

S/F of 16 gauge m.s. drum with louvers for ex-fan complete in all respect P.S.No.1122A

S/f of 9 w Led bulb (As Per Quotation)

S/F of 300 mm Fresh Air Fan/ Exhaust Fan (As Per Quotation)

GST @ 12%