New Okhla Industrial Development Authority Tender
... More
If you're a registered bidder for etender UP and want to inquire about any e-tender UP government has posted, this is your stop. No need to enter every detail on the website of etender.up.nic.in - BidAssist filters will help you find the exact UP etender you're looking for. Read to learn how to search & bid for etender UP.
New Okhla Industrial Development Authority Tender
Civil And Construction
Civil Works Others
Eprocure
Opening Date24 Feb 2025
Closing Date9 Mar 2025
Tender Amount₹ 2,93,54,149
Technical
Technical
Financial
Bid Capacity
... View More
The bid capacity required in terms of financial capability (solvency) is Rs. 9,954,288.00. The experience criteria are based on the completion of similar works, with specific value conditions for one, two, or three similar completed works. These conditions are: - Three similar works: Each work ≥ Rs. 9,954,288.00
- Two similar works: Each work ≥ Rs. 14,931,432.00
- One similar work: ≥ Rs. 19,908,576.00 Additionally, there's a condition related to the performance guarantee/security deposit, calculated based on the percentage below the B.O.Q rate at which the contractor bids, using the formulas:
- 0.5% per one percent up to 10% below the rate
- 1% per one percent on the rate quoted beyond 10% below the rate Other requirements include an Average annual financial turnover on Construction works of at least 30% of the estimated cost during the last 3 consecutive financial years, and possession of specific equipment for road work. However, the specific bid capacity value in terms of financial capability beyond solvency and experience is not explicitly mentioned.
Technical Capacity
... View More
The required prior work experience for the bidder includes having successfully completed works during the last 7 years. The experience can be in the form of:
* Three similar completed works costing not less than 40% of the estimated cost put to tender, which is 9954288.00 (40% of 24885720.00)
* Two similar completed works costing not less than 60% of the estimated cost put to tender, which is 14931432.00 (60% of 24885720.00)
* One similar completed work of aggregate cost not less than 80% of the estimated cost put to tender, which is 19908576.00 (80% of 24885720.00) The similarity of works is limited to specific types of projects, including C/o Building work, C.C.Road, Footpath, Drain, Box Culvert, Central Verge, Painting works, Ordinary maintenance of road, Building, Boundary wall, Inter locking Tiles, Drain other Cemented work. Experience in Sewer & Jal is not accepted. Additionally, the average annual financial turnover on construction works should be at least 30% of the estimated cost during the immediate last 3 consecutive financial years. The estimated cost put to tender is 24885720.00.
Costs
EMD
₹ 5,88,000Document Cost
₹ 5,310Tender Fee
Refer Documents
Summary
Construction Of Parking Near Round About Sector-62, Noida.
Description
Scription for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user
Contact
Tender Id
2025_NOIDA_1010908_1Tender No
34/GM/SM(NTC)/2024-25Tender Authority
New Okhla Industrial Development Authority ViewPurchaser Address
-Website
http://https://www.noidaauthorityonline.in/
GEM & Bid Advisory Services
Get portal registration, tender bidding, product/service listing or vendor/MSME certification services at a nominal cost
BOQ Items
... More
Providing and laying design mix cement concrete of M-30 grade, in roads/ taxi tracks/ runways, using cement content as per design mix, using coarse sand and graded stone aggregate of 40 mm nominal size in appropriate proportions as per approved & specified design criteria, providing dowel bars with sleeve/ tie bars wherever required, laying at site, spreading and compacting mechanically by using needle and surface vibrators, levelling to required slope/ camber, finishing with required texture, including steel form work with sturdy M.S. channel sections, curing, making provision for contraction/
expansion, construction & longitudinal joints (10 mm wide x 50 mm deep) by groove cutting machine, providing and filling joints with approved joint filler and sealants, complete all as per direction of Engineer-in-charge (Item of joint fillers, sealants, dowel bars with sleeve/ tie bars to be paid separately). Note:- Cement content considered in M-30 is @ 340 kg/cum. Excess/ less cement used as per design mix is payable/ recoverable separately Cement concrete prepared with batch mixing machine
729.41
7996
5832588.48
... More
Earth work in excavation by mechanical means (Hydraulic excavator) / manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan), including dressing of sides and ramming of bottoms, lift upto 1.5 m, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m.
356.05
144
51602.33
... More
Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete upto plinth level.Thermo-Mechanically Treated bars of grade Fe-500D or more.
21608.86
82
1789429.7
... More
Providing and laying in position ready mixed M-25 grade concrete for reinforced cement concrete work, using cement content as per approved design mix, manufactured in fully automatic batching plant and transported to site of work in transit mixer for all leads, having continuous agitated mixer, manufactured as per mix design of specified grade for reinforced cement concrete work, including pumping of R.M.C. from transit mixer to site of laying , excluding the cost of centering, shuttering finishing and reinforcement, including cost of admixtures in recommended proportions as per IS : 9103 to accelerate/ retard setting of concrete, improve workability without impairing strength and durability as per direction of the Engineer-in-charge.(Note :- Cement content considered in this item is @ 330 kg/ cum.Excess/less cement used as per design mix is payable/recoverable separately).All works upto plinth level
241.16
7912
1908135.09
... More
Centering and shuttering including strutting, propping etc. and removal of form for :Foundations, footings, bases of columns, etc. for mass concrete
398.27
181
72341.76
... More
Centering and shuttering including strutting, propping etc. and removal of form for :Columns, Pillars, Piers, Abutments, Posts and Struts
230.4
426
98346.24
... More
Centering and shuttering including strutting, propping etc. and removal of form for :Lintels, beams, plinth beams, girders, bressumers and cantilevers
216
320
69260.4
... More
Centering and shuttering including strutting, propping etc. and removal of form for : Walls (any thickness) including attached pilasters, butteresses,plinth and string courses etc.
823.78
335
276419.38
... More
Providing and laying 60mm thick factory made cement concrete interlocking paver block of M -30 grade made by block making machine with strong vibratory compaction, of approved size, design & shape, laid in required colour and pattern over and including 50mm thick compacted bed of coarse sand, filling the joints with line sand etc. all complete as per the direction of Engineer-in-charge.
1185.9
701
831968.14
... More
Washed stone grit plaster on exterior walls height upto 10 metre above ground level, in two layers, under layer 12 mm cement plaster 1:4 (1 cement : 4 coarse sand ), furrowing the under layer with scratching tool, applying cement slurry on the under layer @ 2 Kg of cement per square metre, top layer 15 mm cement plaster 1:1/ 2:2 (1 cement: 1/2 coarse sand : 2 stone chipping 10 mm nominal size),
in panels with groove all around as per approved pattern, including scrubbing and washing the top layer with brushes and water to expose the stone chippings ,complete as per specification and direction of Engineer-in-charge (payment for providing grooves shall be made separately).
1066.9
556
593612.49
... More
Forming groove of uniform size in the top layer of washed stone gritb plaster as per approved pattern using wooden battens, nailed to the under layer, including removal of wooden battens, repair to the edges of panels and finishing the groove complete as per specifications and direction of the Engineer-in-charge :15 mm wide and 15 mm deep groove
2133.8
33
70436.74
... More
Steel work welded in built up sections/framed work i/c hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required In gratings, frames, guard bar, ladder, railings, brackets, gates and similar works.
3280.29
92
302901.98
... More
Providing and fixing G.I. chain link fabric fencing of required width in mesh size 50x50 mm including strengthening with 2 mm dia wire or nuts, bolts and washers as required complete as per the direction of Engineer-in-charge. Made of G.I. wire of dia 4 mm
132
609
80500.2
... More
Painting with synthetic enamel paint of approved brand and manufacture to give an even shade. Two or more coats on new work
522.84
77
40493.96
... More
Cleaning jungle including up rooting of rank, vegetations grass, push, wood trees and samplings of grith upto 30 cms. measured at a height of 1 M. above ground level and removal of rubbish up to a distance of 50M. out side the periphery of area cleared.
6364.48
3
19729.89
... More
Road Marking with Hot Applied Thermoplastic Compound with Reflectorising, Glass Beads on Bituminous Surface. Providing and laying of hot applied thermoplastic compound 2.5 mm thick including reflectorising glass beads @ 250 gms per Sqm area, thickness of 2.5 mm is exclusive of surface applied glass beads as per IRC:35. The finished surface to be level, uniform and free from streaks and holes, Rates are inclusive of all taxes, royalty etc. all T&P/ machine material and labour required for proper completion of work.
318.35
520
165542
... More
Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 100 in foundation and plinth in : Cement mortar 1:4 (1 cement : 4 coarse sand).
81.81
5295
433247.76
... More
Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 150 in superstructure above plinth level up to floor V level in all shapes and sizes in :Cement mortar 1:4 (1 cement : 4 coarse sand)
44.71
6276
280643.78
Evaluation Notes How It Works ?
Potential Partner
Select Your Requirements
Past BiddersThis list is curated from the bidders of the similar tenders in the past
- Bidder NameThis Information is for unsubscribed user This Information is for unsubscribed user
- Awarded Ratexx%
- Bidder NameThis Information is for unsubscribed user This Information is for unsubscribed user
- Awarded Ratexx%
- Bidder NameThis Information is for unsubscribed user This Information is for unsubscribed user
- Awarded Ratexx%