Moradabad Development Authority Tender

M-150 brick work in 1:4(one part of cement and four part of coarse sand of 2.25M) Brick work in super structure in one brick including necessary cutting and moulding of bricks as required and also including honey comb brick work thickness of wall one brick thick. S.I- 307(A)+309+310/2022

M-150 brick work in 1:4(one part of cement and four part of coarse sand of 2.25M) Brick work in super structure in half brick including necessary cutting and moulding of bricks as required. S.I- 307(A)+309+310A/2022

Dismentling of old plaster i/c supply of all materials, labour, T&P etc.required for proper completion of the work SI NO 706/2022

12mm thick plaster in 1:4 cement and coarse sand mortar over brick work minimum thickness not to be less than 10mm including supply all materials labour t&P etc required for proper completion of work (S.I NO. 584/2022

Cement concrete with 4cm. gauge brick ballast, fine sand and cement in proportion of 12:6:1 in foundation and under floors including supply of all materials, labour, T&P etc. required for proper completion of the work.(Sl.No.273/2022/

Cement concrete with 2 cm. gauge approved stone grit, coarse sand and cement in proportion of 4:2:1 including supply of all materials, labour, T&P etc. required for proper completion of the work.(Sl.No.279A/2022/

Supply & Laying of 80 mm thick precast cement concrete paver block with a top layer of minimum 8mm thickness having plan dimension 200 10 x(160+120) of O P cement, smooth high gloss fnish, skid reditant, Manufactured from rubber moulds threw vibro-compressio SI.No- 5(1)/2022 Page no-50 (grey colour)

RCC work with cement approved coarse sand and 2cm (3/4")gauge approved stone ballast in the proportion 1:1.50:3 (1 cement aggregates) in slab including necessary centering & shuttering excluding supply of reinforcement and its bending the same with 24 BWG GI binding wire and necessary centering & shuttering excluding supply of reinforcement. 284A/2022

Mild steel or iron in plain work such as reinforced concrete or reinforced brick work (when not included in an overall rates) wrought to required shape as necessary including bending for proper completion of the work and including supply of all steel its wastage bend hooks and authorised overlapping shall be measured up to foor two level (PWD S.I No-504)/2022

Finishing walls with superior quality water proof cement paint/ snowcem of approved make and quality of new work with two coats to give eben shade including preparing surface by the thoroughly cleaning and sand preparing and supply of all mateials, labour, and T&P ETC.required for proper completion of the work. SOR NO 660+661/2022 Page NO 41

Supply & Fixing of RCC Gardern bench with back rest consists of 2 Nos.L-shape base support in grey cement color (thickness: 100 mm, Back height:1000 mm, front height:450 mm, Base width:620mm) and 5 Nos reinforced concrete planks in approved/red colour or terrazzo finish of size 1500mm X 100mm X 50mm, and 1 No of reinforced concrete plank of size 1500mm x 200mm x 50mm, Overall Dimensions: Seating length of the Bench: 1500 mm: Seating height of the Bench:450 mm; Total height of the Bench: 1000 mm. All components should be reinforced suitably for long use and to prevent damage during handling, transportation, and erection. All parts are joined together with galvanized nuts & bolts of suitable size and all bolts are sealed after assembly. Bench top and back planks are treated with special anticorrosive, water proof coating so as to make surfaces glossy and water proof. All components should be manufactured by using M-30 grade of Concrete using vibrio compaction process complete in all Trasnact PS

Mild steel of iron work for fabrication of grill and stair case railing etc. wrought to required form including drilling holes riveting or weliding whare necessary, and also inculiding supply of steel, bolts, S.I. No 502(C) 2022