Moradabad Development Authority Tender

Providing wall Putty on SURFACE with approved quality material of BERGER /J K/BIRLA OR Similar make 2 coats (chapter no 15 new item no 13 /sor 2020 Same Qty as above Item no.1 (PWD SOR S I no 13 Ch.15/2020)

Distempering two coats with oil bound distemper of approved brand and required shade on undecoated wall surface to give an even shade over and including a primer coat with cement primer of brand and manufacture such as British and similar Asian paints after thoroughly brushing the surface free from mortar droppings and and other foreign matter and also including preparing the surface even sand papered smooth including cost of all materials. (PWD SOR SI.No-649+650/2020)

Finishing walls with Acrylic Smooth exterior paint of required shade on new work (Two or more coat applied @ 1.67 ltr/10 sqm on existing cement surface including priming coat of exterior primer applied @ 2.20 kg/10 Sqm (DSR/13.64.1/2019)

Finishing walls with Acrylic Smooth exterior paint of required shade on old work (Two or more coat applied @ 1.67 ltr/10 sqm on existing cement surface DSR/13.111.1/2021

Painting Two coats over previously painted old surface on steel and other metal surface with superior synthetic enamel paint of standard make brushing to give an even shade and finished and including cleaning the surface all dust and other foreign matter sand papering and stripping including cost matter and scoured with wire brushed fine steel/wood scrappers sand papering and knotting including coat of all and supply of all materials, labour tools and plants etc. required for proper completion of the work for jali, window panel (PWD SOR S.I.No.-new item 3(iii)+4(iii)/2020)

P/L vitrified floor tiles (BELL/KAJARIA/SOMANI or other standard make) in different sizes (thickness to be specified by the manufacturer) with water absorptions less then 0.08 % and conforming to IS: 15622 of approved make in all colours and shades, laid on 20 mm thick cement mortar 1:4(1 cement, 4 coarse sand) including grouting the joints with white cement and matching pigments etc. complete. SOR new item. 4 page 39/2020

Floor polishing on masonry or concrete floors with wax polish of approved brand and manufacture. DSR 13.70/2019

Providing and fixing white vitreous china pedestal type water closet (European type) with seal and lid, 10 litre low level white vitreous china "Aching cistern & C l' flush bend with fittings & C.1 brackets, 40mm flush bend overflow arrangement with specials of standard make and mosquito proof coupling of approved municipal design complete including painting of fittings and brackets, cutting and making good the walls and floors; wherever required. DSR 17.3.1/2019

Providing and fixing 600X450 mm bevelled edge mirror of superior glass (of approved quality) complete with 6 mm thick hard ground fixed to wooden cleats with C.P. brass screws and washers complete. (PWD SOR SI.No-17.31 Ch-22)/2020

Providing and fixing C.P. brass long nose bib cock of approved quality conforming to IS standards and weighing not less than 690 gms. 15mm nominal bore. (DSR 18.51.1/2019)

Providing and fixing white vitreous china wash basin including making connection but excluding the cost of fittings, Flat back wash basin of size 630X450 mm. DSR no17.25.1/2019

P/F white vitreous china pedestal for wash basin completely recessed at the back for the reception of pipes and fittings (DSR 17.8/2019)

Providing and fixing toilet paper holder C.P. brass 17.34.1

Polishing on wood work with ready mixed wax polish of approved brand and manufacture (DSR 13.69.8/2019)

P/F soap dispenser of approved brand

P/F C.P. brass angle valve for basin mixer and geyser points of approved quality (DSR 18.53.1/2019)

P/F of 45 cm long PVC connection with nuts

Supply, erection, fixing and commissioning of 1200/1400 mm sweep energy efficient celling fan with fan regulator etc. complete in all respect as per site requirement.

S/F of LED tube light with batten suitable for up to 1X 22 watt LED tube light fittings including tube on surface complete in all respect. (UPPWD SOR 2018 For Electrical Works)

Providing and fixing stainless steel ( Grade 304) railing made of Hollow tubes, channels, plates etc., including welding, grinding, buffing, polishing and making curvature (wherever required) and fitting the same with necessary stainless steel nuts and bolts complete, i/c fixing the railing with necessary accessories & stainless steel dash fasteners , stainless steel bolts etc., of required size, on the top of the floor or the side of waist slab with suitable arrangement as per approval of Engineer-in-charge, (for payment purpose only weight of stainless steel members shall be considered excluding fixing accessories such as nuts, bolts, fasteners etc.). (DSR-2021)

Designing, fabricating, testing, installing and fixing in position Curtain Wall with Aluminium Composite Panel Cladding, with open grooves for linear as well as curvilinear portions of the building , for all heights and all levels etc. including: (a) Structural analysis & design and preparation of shop drawings for pressure equalisation or rain screen principle as required, proper drainage of water to make it watertight including checking of all the structural and functional design. (b) Providing, fabricating and supplying and fixing panels of aluminium composite panel cladding in pan shape in metalic colour of approved shades made out of 4mm thick aluminium composite panel material consisting of 3mm thick FR grade mineral core sandwiched between two Aluminium sheets (each 0.5mm thick). The aluminium composite panel cladding sheet shall be coil coated, with Kynar 500 based PVDF / Lumiflon based fluoropolymer resin coating of approved colour and shade on face # 1 and polymer (Service) coating on face # 2 as specified using stainless steel screws, nuts, bolts, washers, cleats, weather silicone sealant, backer rods etc. (c) The fastening brackets of Aluminium alloy 6005 T5 / MS with Hot Dip Galvanised with serrations and serrated washers to arrest the wind load movement, fasteners, SS 316 Pins and anchor bolts of approved make in SS 316, Nylon separators to prevent bi-metallic contacts all complete required to perform as per specification and drawing The item includes cost of all material & labour component, the cost of all mock ups at site, cost of all samples of the individual components for testing in an approved laboratory, field tests on the assembled working curtain wall with aluminium composite panel cladding, cleaning and protection of the curtain wall with aluminium composite panel cladding till the handing over of the building for occupation. Base frame work for ACP cladding is payable under the relevant aluminium items The Contractor shall provide curtain wall with aluminium composite panel cladding, having all the performance characteristics all complete , as per the Architectural drawings, as per item description, as specified, as per the approved shop drawings and as directed by the Engineer-in-Charge. However, for the purpose of payment, only the actual area on the external face of the curtain wall with Aluminum Composite Panel Cladding (including width of groove) shall be measured in sqm. up to two decimal places. Item no. 8.32 DSR-2021

Concrete with 4 cm Guage brick ballast fine sand of 1.25 F:M. and (cement in proportion of 12:6:1 in foundation and under floors including of all meterials, labour and T&P etc. required for Proper completion of work. As an item No.275 above but in proportion 8:4:1

M-150 brick work in one while lime and three surkhi mortar in foundation and plinth including supply of all meterials, labour and T&P etc required for proper completion of work. Same as above item but in 4 (one cement and coarse Sand) sand of 2.20 F.M. mortar) SI N0. 307 (a)

Class-150 brick work in 1:4 (1 cement : 4 coarse sand ) in super structureincluding supply of all material, labour, T&P etc. required for proper completion of work . (PWD S.I No. 307a +309+310) sor 2020

40 mm thick Cement concrete flooring 1:2:4 (1cement : 2coarse sand : 4graded stone aggregate of size 20 mm nominal size )laide in one layer, finished with floating coat of neat cement.including fixing of glass strips. (excluding cost of glass strips ). item no.279a/SOR 2020

R.C.C. Work with cement approved coarse sand and 2cm. gauge approved stone grit in proportion of 1:1.5:3 in lintels of doors, windows and sunshades excluding supply of reinforcement and its bending but including its fixing and binding the same with 24 B.W.G.G.I Binding wire and including necessary centenng and shuttering etc. and supply of all meterials, labour and T&P etc required for proper completion of work. Binding wire to be supplied by the contractor free of cost. lncludin making of drip coarse. SI No.289 SOR-2020

Mild steel or iron in plain work such as reinforced concrete or reinforced brick ,vc.vic (when not included in an over all rates) wrought to required shape as, lecessati including bending for proper completion of the work and including supply of all steel, SI No.504 SOR-2020

Mild steel of iren work in Heavy sizes such as trusses; builts up gates, door, frames, record recks roof work, gates etc. wrought to required form including drilling holes riveting or weliding whare necessary, and also inculiding supply of steel, bolts, S.I. No 503 SOR-2020

12 mm cement plaster 1:4 (Cement & Coarse sand) in single coat on fair side of single or half brick wall for interior plastering including internal rounded angles chamfers and/or rounded angles not exceeding 80mm in girth and finished even and smooth. no extra for mixing any additive. (PWD SI.No-584.) SOR-2020

Finishing with one coat of water proof cement Dart. sibieather coat of approved quality on previously old ea:e: surface with this paint to give an even shade including supply of all marerials, labour, Tools & plant etc reuired for completion of the work.

Painting first coat over priming coat (but excluding cost of priming coat) on wood or steel and other metal surface with superior synthetic enamel paint of standared make brushing to give an even shade and finished and including cleaning the surface all dirt dust and other foreign matter sand paparing and stripping including cost matter and scoured with wire brushes fine steel/ wood scrappers sand papering and knotting including coat of all and supply of all materials labour and T&P etc. required for proper completion of the work. New item No. 02+New item No.03(iii) Superior Quality