Moradabad Development Authority Tender

12 mm thick plaster with (1:4) One part of cement and Four part of approved Corse sand includig supply of all material and completion of work. S.I No. 584/2022

Supply & Fixing 80 mm thick Grey color Precast cement concrete I-Shape interlocking paver block a with top layer of minimum 8mm thickness having plan dimension 200x(l60+120mm) of O.P. cement, Smooth high gloss finish, skid reditant. manufactured from rubber moulds through vibro-compression machanism. The compressive strength of concrere paver block shall not be less than 30MPA (M-30) and wight 5kg per no confirming to IS; 15658-2006 with a 4 cm thick layer of fine sand including cost of material,labour, T & P TAXES etc requried for proper completion of the work as directed by Enginner- in-charge. SI. No. ADDITIONAL ITEM - 5

Mild steel or iron work of small sizes and sections such as holding down bolts, hold fast tierods,gratings etc. ( when not included in an over all rates) wrought to required from including supply of steel and its wastage including cost of bolts, nuts if required for and welding, grinding and making holes as required completion of work fabrication of holes doors, chaukhats nosing. item no-503/2022

Finishing wall with two coat of water proof cement paint snowecem of approved make and quality of new work with three coat to give and even shade inculding priparing surface by the throughly cleaning and send preparing and supply of all material laber and t&p etc. required for proper completion of the work. SI.No.(660 + 661) 2022

Painting two coats over primiary coat on steel or other material surface with superior synthetic enamel paints of standard make brushing to give on even shade including supply all materials labour T&P etc. all com. Of work. S.I.No. 1(a)+2+4(iii)/2022

Cement Concrete with 2cm. guage approved stone ballast coarse sand and cement in proportion of 4:2:1 including supply of all materials, labour and T&P etc. required for proper completion of work. SI No-279(a)/2022

cleaning jungle including up rooting of rank vegetation grass, bush, wood, trees and sapling girth up to 30 ems Measured at the height of 1 M above ground level and removal of rubbish up to a distance of 50 M. Outside the periphery of area cleared. SI No-259/2022

Supply & Fixing of RCC Gardern bench with back rest consists of 2 Nos.L-shape base support in grey cement color (thickness:100 mm, Back height:1000 mm, front height:450 mm, Base width:620mm) and 5 Nos. reinforced concrete planks in approved/red colour or terrazzo finish of size 1500mm X 100mm X 50mm, and 1 No of reinforced concrete plank of size 1500mm X 200mm X 50mm, Overall Dimensions: Seating length of the Bench:1500 mm; Seating height of the Bench:450 mm; Total height of the Bench:1000 mm. All components should be reinforced suitably for long use and to prevent damage during handling, transportation, and erection. All parts are joined together with galvanized nuts & bolts of suitable size and all bolts are sealed after assembly. Bench top and back planks are treated with special anticorrosive, water proof coating so as to make surfaces glossy and water proof. All components should be manufactured by using M-30 grade of Concrete using vibrio compaction process complete in all respect. P.S. Rate