Military Engineer Services Tender
If you're a registered bidder for etender UP and want to inquire about any e-tender UP government has posted, this is your stop. No need to enter every detail on the website of <a href="https://etender.up.nic.in">etender.up.nic.in</a> - BidAssist filters will help you find the exact UP etender you're looking for. Read to learn how to search & bid for etender UP.
Military Engineer Services - MES Tender
Civil And Construction
Civil Works Others
Building Construction
Eprocure
Opening Date29 May 2023
Closing Date26 Jun 2023
Tender Amount₹ 36,00,000
Costs
EMD
₹ 72,000Document Cost
₹ 500Tender Fee
Refer Documents
Summary
8268 Certain Repair To Roofing Sheet, Ceiling, Sanitary Fittings, Plumbing Works Etc. Including Internal Electrification In Otm, Md Accn Of 6 Mtn Dou, Office Complex Of Ge (e) Bly Under Ge (e) Bareilly.
Description
Scription for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user
Contact
Tender Id
2023_MES_599240_1Bid Award Id
ViewTender No
8268/E8Tender Authority
Military Engineer Services ViewPurchaser Address
-Website
http://http://mes.gov.in/
GEM & Bid Advisory Services
Get portal registration, tender bidding, product/service listing or vendor/MSME certification services at a nominal cost
BOQ Items
... More
Taking down shutter of any description exc. 1 sqm but n.exc 2 sqm each and removing from site complete all as specified and as directed.
15
-
-
... More
S & F Solid PVC door frame of size 50 mm x 47 mm made out of 10 mm plain colour PVC sheet reinforced with MS square tube, supplying and fixing in opening as per specification & drawing complete all as specified and as directed.
94
-
-
... More
S & F Factory made solid panel PVC Moulded door shutter 28 to 30mm thick(stiles), with 2, 4, or 6 raised panel design 2mm thick Prelam PVC sheet on the front face and 2mm thick Plain colour PVC sheet on back face with particle Board core complete all as specified and as directed.
28
-
-
... More
S&F in repair 2nd class hardwood Plain, solid, straight chowkats and frames, wrought, framed rebated on the solid, rounded or chamfered, put together with glue pinned at joints, complete all as specifed as directed
0.93
-
-
... More
S&F for 35 mm thick factory made flush shutters, solid core construction, with block board core and plywood face panels, commercial type on both sides complete all as specified and as directed.
61
-
-
... More
S&F 35mm thick factory made glazed and skeleton door shutters open rebated of second class hard wood rail and styles(Hollock), prepared to receive glass/gauge etc without sash bars, edges of framing plain cham-fered or rounded, mitred and rebated sash bars, any numbers The size of rails & style as specified in SSR Part-I (2009) section 8 and as per IS-1003(Part-I) kiln seasoned as per IS-1141 and chemically pressure treated as per IS-401 complete all as specified and as directed.
(Note :- S & F Glass/gauge shall be measured and paid for separately)
61
-
-
... More
S&F in repairs for 18 mm thick block board laminated on one side of commercial quality exterior Grade -I fixed with screws as in cup board shutters/shelves/rear side etc including lipping/beading all over shutter complete all as specified and as directed.
80
-
-
... More
M & L for powder coated aluminium sliding window with anodized aluminium frame of 3 Track of size 92mmx32mmx 1.5mm thick, with sliding shutters (02 glass and 01 Wirecloth) with necessary channels (top rail, bottom rail and style of size 40mmx 18mm x1.10 mm thick) including glazing with tinted sheet glass panel 4.00mm thick and Aluminum alloy wirecloth 4mm nominal dia and avg width of aperture 1.4mm, fitted with necessary jointing cleats, glazing clips,locking device one for each shutter , rubber packing, aluminium beading, screws, rawl plugs including all necessary holes / drilling etc, complete all as specified as directed. Note : If mentioned section are not available in market, then immediate next higher section shall be provided by Contractor without any extra cost.
45
-
-
... More
M & L for providing Aluminiium shutter with Powder coated frame 88.9mmx 47.63mmx 1.60 mm thick fixed with heavy duty aluminium hinge of size 125mm and size of shutter with top rail, middle rail and bottom rail and style of size 85 mm x 44.5 mm x 1.56 mm thick with 200 mm size powder coated 2 nos with each leaf, Heavy duty powder coated aluminium tower bolt 150mm long 2 Nos per leaf, 3 nos Heavy duty aluminium powder coated of size 125mm with each leaf including 12 mm thick both side prelaminated particle board / 5.5 mm thick glass pane in the both panel with necessary joining cleats, rubber packing, aluminium beading, screws etc complete all as specified and as directed. Note : If mentioned section are not available in market, then immediate next higher section shall be provided by Contractor without any extra cost.
15
-
-
... More
S&F aluminium powder coated frame for louvers section of size 75x40x1.6mm including 4mm thick glass in louvors of 100 mm width with glazing cleat and revolving arrangement of standard section of aluminium including rubber packing, aluminium beading or gasket for for aluminium sections for fixing glass sheet and necessary fittings complete screws plugs, handle, tower bolt, stay hooks including fixed Aluminium wire cloth etc all as specified and directed.
Note : If mentioned section are not available in market, then immediate next higher section shall be provided by Contractor without any extra cost.
20
-
-
... More
S&F in rapair 4 lever brass mortise lock vertical type, size 100mm for aluminium door with 3 nos of keys complete all as specified and as directed.
20
-
-
... More
Dismantling of Existing Aluminium door/window upto 4 sqm each complete all as specified and as directed.
80
-
-
... More
S&F 150 mm aluminium anodised barrel tower bolts of extruded section, ISI marked complete all as specified and as directed.
165
-
-
... More
S&F 150 mm extruded aluminium alloy handles , fabricated type, anodised, ISI marked complete all as specified and as directed.
110
-
-
... More
S&F 100 mm MS butt hinges medium weight cold rolled mild steel complete all as specified and as directed.
165
-
-
... More
S&F 300 mm long and Mild steel Chromium plated sliding door bolts, plate type, with bright bolt not less than 12mm dia with and including a minimum of 6 bolts and nuts, four on bolt plate and two on staple plate and fixed complete all as specified and as directed.
10
-
-
... More
S&F in repair 150 mm brass heavy duty tower bolts of extruded section, ISI marked complete all as specified and as directed.
10
-
-
... More
S&F in repair 150 mm brass heavy duty handles, fabricated type, anodised, ISI marked complete all as specified and as directed.
10
-
-
... More
S&F in repair 100 mm brass heavy duty butt hinges medium weight cold rolled mild steel complete all as specified and as directed.
15
-
-
... More
S&F in repair 300 mm long and brass heavy duty sliding door bolts, plate type, with bright bolt not less than 12mm dia with and including a minimum of 6 bolts and nuts, four on bolt plate and two on staple plate and fixed complete all as specified and as directed.
5
-
-
... More
S&F 40mm width of flaps Continuous (piano) hinges, mild steel, bright finish or electro galvanised complete all as specified and as directed.
40
-
-
... More
S&F for fancy type CB knobs of kitchen /drawer shutter as approved by Engr in charge etc complete all as specified and as directed.
20
-
-
... More
S&F for magnetic door lock for door shutters of CB and kitchen shutters of SS, ISI marked complete all as specified and as directed.
10
-
-
... More
S&F for fancy type handles 100 mm high of kitchen shutter /CB shutter as approved by Engr in charge etc compete all as specified.
10
-
-
... More
S&F for blind shutter hinge for door shutters of CB and kitchen shutters of SS, ISI marked complete all as specified and as directed.
5
-
-
... More
S&F for magnetic door lock for door shutters of CB and kitchen shutters of SS, ISI marked complete all as specified and as directed.
5
-
-
... More
S&F mild steel spring 250mm for door, ordinary rat tail rod pattern springs, including roller and roller plate including welding as required for steel frame compete all as specified as directed ( work shall be carried out in MD Qtrs/ OTM accns in different locations of AOR GE east Bareilly as per site requirements upto 4 storieyed building)
15
-
-
... More
S&F galvanised mild steel wire cloth 0.56 mm nominal dia of wire and average width of aperture 1.18 mm and fixed with tinned tracks or wooden beeding patti compete all as specified and as directed.
10
-
-
... More
M & L two coats of synthetic enamel paint over one coat of pink primer on wood or wooden based surface exc. 10cm width or girth including preparation of new or previously untreated surfaces complete all as specified and as directed.
126
-
-
... More
S&F for steel windows conforming to IS-1038 with side hung shutters including box type hinges with 2 Nos MS 100mm size tower bolt over MS flat iron for each openable leaf & Z section handle and steel peg stay complete with glazing bars, dovetailed or welded including one shop coat of Red Oxide Zinc chromate primer complete all as specified and as directed.
(Note :- Glass shall be measured and paid for separately).
20
-
-
... More
Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises complete all as specified and as directed.
825
-
-
... More
Demolition of cement concrete in ground floors and pavings n exc 15 cm thickness (below or above ground level) and removing the rubbish complete all as specified and as directed.
45
-
-
... More
M & L for 75mm thick Cement Concrete 1:4:8, type D2 (using 40 mm graded stone aggregate) as in sub base of floor complete all as specified and as directed.
400
-
-
... More
M & L for 25 mm thick Cement Concrete 1:2:4 type B 1 (using 20 mm graded stone aggregate) as in sub bases, sub floors complete all as specified and as directed.
300
-
-
... More
M&L for Vitrified Glazed ceramic coloured / double charged / ultra charged tiles 9-10 mm thick square / rectangular) polished area of each tile 800 mmx 800 mm / 600mmx1200 mm size approved by GE in floors etc. set and jointed in neat cement slurry and pointed in matching colour 5 mm thick epoxy filling in between tiling over and including 15mm thick screed bed in CM 1:6 complete complete all as specified and as directed. Note : Engr-in-Charge will select sample from latest catalouge.
250
-
-
... More
All as per Srl item No 38 here in before but in vertical surfaces size n exc 0.36 sqm such as dado/skirting including 10 mm thick rendering of cement mortar 1:4
25
-
-
... More
M&L for providing non- skid glazed ceramic tiles coloured 7-8 mm thick (square/rectangular) area of each tile exceeding 0.06 sqm but n exc 0.11 sqm, in floor etc set and joited with neat cement slurry and pointed in coloured cement to match coloured tiles including 15 mm thick cement screed bed in CM 1:6 complete all as specified and as directed. Note : Engr-in-Charge will select sample from latest catalouge.
200
-
-
... More
All as per Srl item No 40 here in before but in vertical size n exc 0.36 sqm such as dado/skirting including 10 mm thick rendering of cement mortar 1:4
20
-
-
... More
M&L Glazed ceramic coloured tiles (square/ rectangular) with border in vertical surface 300 mm x 450 mm / 300x600 x 7mm thick set and jointed in neat cement slurry and pointed in white cement or coloured cement to match the surface including 10 mm thick rendering in cement mortar 1:4 complete all as specified and directed. Note : Engr-in-Charge will select sample from latest catalouge.
90
-
-
... More
M&L for providing non- skid glazed ceramic tiles coloured 300 mm x 300mm x 7 mm thick in floors etc., laid over 15 mm thick screed bed of cement mortar 1;6 set and jointed in neat cement slurry and pointed in white or coloured cement to match complete all as specified and as directed.
20
-
-
... More
M&L for 75mm thick PCC 1:1½:3, A1 (using 20mm graded stone aggregate) as in flooring complete all as specified and as directed.
7.5
-
-
... More
M&L Forming Contraction (Dummy) joints 65mm deep x 10mm wide, filled with sealing compound Gared A complete all as specified and as directed.
3
-
-
... More
M&L in repairs for machine pressed pre-cast concrete interlocking coloured paver block, Glossy finish and shape and size conforming to IS-15658-2006 of 100 mm thickness M-50 grade with grey cement and pigment laid dry over and including 50 mm thick stone dust or sand base and compacted using vibrator complete all as specified and directed.
200
-
-
... More
Demolition of reinforcement cement Concrete in slab, kitchen platform and other similar suspended work pavings n exc 15 cm thickness complete all as specified and directed.
1
-
-
... More
M&L for reinforced cement concrete type B1 (1;2;4) nominal mix using 20 mm graded broken stone aggregate as in slabs supported on walls, beams and columns in floors, roofs, landings, shelves and the like complete all as specified and directed.
1
-
-
... More
M&L for Formwork to sides and soffits of floor or roof beams, beam haunchings,girders, bressummers,lintels, cantilevers, shelves including supports, overhangs, etc. also splays between floors and beams, etc. complete all as specified and as directed.
15
-
-
... More
M&L for 10mm dia and over mild steel TMT bars, cut to length, bent to shape required including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.90mm dia or securing with clips, complete all as specified and directed.
80
-
-
... More
M&L for 18-20mm thick Granite (of any type) tiles machine cut, in skirting/ dado including 10 mm thick rendering of CM 1:4 and jointed with grey cement slurry, and pointed with white cement with admixture of pigment to match the shade of granite stone including grinding and polishing complete. Complete all as specified and as directed.
20
-
-
... More
Taking down cement plaster including racking out joints, hacking for key & scrubbing down with water etc complete all as specified and directed.
250
-
-
... More
M&L 15mm thick rendering in cement mortar 1:4 to brick masonry wall surfaces or on other than fair faces of brick wall surfaces finished fair & even without using extra cement for fixing tiles etc complete all as specified and directed
250
-
-
... More
M&L for repairs to sunken floor slab with the following specifications:-
(a) Demolition of PCC and taking out old brick bat fillihng and roughening surfaces of old concrete floor and wall by picking, sweeping clean and washing down with water to remove dust etc. (b) PCC 1:2:4,type B-0, using 12.5mm graded stone aggregate averaging 50mm thick as in sunken floor,with proper slope towards GI spout. The dia of GI Spuot pipe shall be 50mm Medium grade. The minimum length of Spout shall be 500mm and if any spout comes above chajja than the length of the spout shall be more than Chajja projection. Ends of Spout shall be tippered and any cutting through brick/ RCC structure shall be done by the Contractor rates are deemed to be included of this aspects.
(c) providing 15mm thick cement plaster in cement mortar 1:3 mixed with and including water proofing compound @ 3% by weight of cement over bottom and vertical surfaces finishing the surface even and smooth with using extra cement. (d) Damp proof course on horizontal / Vertical surfaces with preparation & applying one coat of primer (33% dilution) and two coats of undiluted material @ 10.67 lts per 10 sqm of Make : smart care Damp proof of M/s asian paint or equivelent for water proofing compound.
(e) Graded Brick bats filling under sunken floor of required thickness as per site, (f) PCC 1:3:6,type C-1,using 20mm graded stone aggregate 75mm thick, over brick bats filling as in subbase. Note:- (i) For payment purpose only plan floor area shall be measured. (ii) After Coating of Water proofing compound ponding test shall be carried out by filling the sunken surface with water for 72 Hrs and get approved by Engr-in-Charge if any leakage/ seepage noticed the Contractor will re do the whole process without any extra payment.
20
-
-
... More
Taking down carefully existing bitumen tarfelt including plastering upto 15mm thick cleaning the surface and make free of dirt, foreign particles, laitance followed by grinding all protrusions to make surface modulated and removing all foreign materials / Bitumenous primer completely, cleaning and washing the existing surface of roof/slab, terraces including flashings and junctions of parapets/Curb walls etc and as directed.
300
-
-
... More
M&L for providing ement concrete 1:2:4 Type B0 (Using 12.5mm graded stone aggregate) as in bed plate/roof kerb/PCC padding and haunching etec all as specified and directed by Engr in Charge
7.5
-
-
... More
M&L for rendering 10 mm thick in CM 1:3 on concrete surfaces mixed including water proofing compound @ 0.12 ltr per bag of cement or as per manufacturer instruction and finishing the surfaces even and smooth without using extra cement complete all as specified and directed.
300
-
-
... More
M&L providing cement slurry @ 3Kg per sqm on existing roof surface before laying PCC/ Plaster complete all as specified and directed.
300
-
-
... More
M&L for cleaning the newly plastered surfaces throughly with wire brushes and providing water proofing treatment all as given here in after
(a) Bituminous primer @ 0.3lit per Sqm conforming to IS-3384-1986 (b) 3 mm thick APP polymer modified moply FP with minimum wt 3.0 Kg per square metre membrane (one layer) laid by torch application method.
(c ) Applying two coat of bituminous based aluminium paint @ 0.20 Kg in two coats (total in two coats) per square metre over membrane. Complete all as specified and directed.
(d) The overlaps of APP shall be SSR part 1 and APP shall be laid by expert/ skilled workers only, bitumen based aluminious paint applied by brushes only.
300
-
-
... More
M & L for cement concrete 1:3:6, type C2 (using 40 mm graded broken stone aggregate) 75 mm thick as in plinth protection and finish even and fair all as directed.
100
-
-
... More
M&L for Forming Construction joint 30mm deep x 10mm wide filled with sealing compound of Grade A complete all as specified and as directed.
8.1
-
-
... More
M&L in repairs for pre-painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm TCT thick of any colour approved by GE having tensile strength of 550Mpa as in roof covering / cladding to wall, fixed with 5 Nos. self tapping screws on each sheet /each support rubber lining and filling of gap with cement mortar in CM 1:4 with wall and sheet up to 6 mtr height complete all as specified and as directed.
450
-
-
... More
All as per Srl item No 62 here in before but in ridges of same profile and minimun girth 750mm
50
-
-
... More
S&F in repairs for 6 mm thick Fiber cement, (corrugated or semi corrugated) sheets in roofs, walls, fixed with L-type or J-type hook or cranked bolts complete all as specified and directed.
350
-
-
... More
S&F in repairs for 6mm thick Fiber cement two piece adjustable serreted ridge for corrugated, semi-corrugated etc sheets fixed with L-type or J-type hook or cranked bolts complete all as specified and directed.
117
-
-
... More
Dismantling wrought iron or mild steel work of any description not otherwise provided for complete all as specified and directed.
15
-
-
... More
S&F steel work in rolled section as approved, purlins, rafter, posts, gusset plates cleats, wind ties etc including special shape washers etc complete using ERW or induction butt welded tubes confirming to IS 116-1979 grade (medium grade) complete all as specified and directed.
1500
-
-
... More
S&F in repairs of 15mm dia Gun-metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe and fixed complete all as spd as directed
5
-
-
... More
S&F in repairs of 20mm dia Gun-metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe and fixed complete all as spd as directed
20
-
-
... More
S&F GI tube 15 mm dia medium grade with all fittings and fixed to wall, ceiling or laid in floors including taking down existing GI tubing 15 mm dia & connections complete all as specified and directed.
80
-
-
... More
S&F GI tube 20 mm dia medium grade with all fittings and fixed to wall, ceiling or laid in floors including taking down existing GI tubing 20 mm dia & connections complete all as specified and directed.
70
-
-
... More
S& F in repair for 20 mm dia CPVC pipe as on wall , floor , ceiling , concealed etc complete and as directed by Engr in charge with all fittings and fixtured, jonting solution of ISI mark including making grove in wall/ceiling and finished with cement mortor 1:4 with plumbing nails for securing pipes etc directed.
15
-
-
... More
S& F in repair for 25 mm dia CPVC pipe as on wall , floor , ceiling , concealed etc complete and as directed by Engr in charge with all fittings and fixtured, jonting solution of ISI mark including making grove in wall/ceiling and finished with cement mortor 1:4 with plumbing nails for securing pipes etc directed.
20
-
-
... More
S&F in repairs wash basin mixer cast copper alloy, chromium plated central hole without popup waste system with 450mm long copper pipe and brass nut including hot & cold water system complete all as directed.
5
-
-
... More
S&F in repairs wall mixer cast copper alloy, chromium plated 3 in 1 system with provision for both over head shower chromium plated, with wall flange, screwed down, for iron pipe or for brass ferrule including dismantling of 3 No.concealled stop cock & 2 No. bib cock for each mixer complete all as specified and as directed.
5
-
-
... More
S & F in Repair Pillar taps, cast copper alloy , with capstan heads, chromium plated, screwed down high pressure fancy type of 15 mm bore size with or without lettered Hot or Cold with long screwed shanks and flynuts , screwed for iron pipe and fixed Complete all as specified and as directed.
20
-
-
... More
S&F in Repair Cast copper alloy CP angle valve type stop cock suitable for 15mm bore pipe screwed at both ends or high pressure with Capstan head including dismanteling and making good the tiles if required of make complete all as specified and as directed.
60
-
-
... More
S&F in Repair bib taps of bore size 15mm, cast copper alloy, , chromium plated, fancy type, with crutch or butter fly handle screwed down, screwed for iron pipe or for brass ferrule including dismanteling and making good the tiles if required Complete all as specified and as directed.
50
-
-
... More
S & F in Repair brass cromium plated conceled stop cock of bore size 15 mm, in position conceled in walls/ceilings or floors complete duly making grooves filled with cement mortar in 1:4 finished to match with adjacent surfaces Including dismanteling and making good the tiles if required complete all as specified and as directed
5
-
-
... More
Supply and fixing in repairs 100 mm dia CP brass shower rose swivel type with extension CP rod 15mm dia and 300mm long with connecting rod suitable for 15mm bore pipe .Complete all as specified and directed.
10
-
-
... More
S&F in Repair PVC connection 15mm size with PTMT nuts, of length 600mm complete all as specified and as directed.
60
-
-
... More
S&F in repair Toilet paper holder chromium plated fixed with CP screws complete all as specified and as directed.
10
-
-
... More
S & F in Repair viterous china wash hand basin of size 550 x 400 mm, white colour flat back excluding taps, chain and plug and porcelean stopper but including brackets and CP waste fitting . complete all as specified and as directed.
4
-
-
... More
S & F in repairs vitreous china wash down water closet pedestal pattern (EWC) white excluding flushing cistern & Incl white seat cover closed pattern with flat bottom, and cover and mild steel chromium plated or aluminised hinging device and flush pipe.Complete all as specified and directed.
4
-
-
... More
S&F in repairs vitreous china squatting pan Orissa pattern size 580x440mm white with P or S trap front or back inlet and integral foot rests including connection to trap to flush pipe etc complete including for making good to floor etc Complete all as specified and as directed.
4
-
-
... More
S&F in repairs Vitreous China bowl urinal flat back, size of 465 x 355 x 265 mm white (minimum), with grating and union for discharge pipe including fixing plugs , bedding urinal against wall in cement mortar (1:2) etc. including CP Waste fitting and PVC waste pipe completed all as specified and directed.
4
-
-
... More
S&F in repairs, PVC low level cistern 10 litres capacity, valve less, symphonic action type with float, handle including 32mm dia PVC flush pipe of polyethylene of low or high density & bracket etc complete all as specified and directed.
20
-
-
... More
S & F in repairs CP health faucet special (1.5 mtr tube) with hook for EWC complete all as specified and directed.
15
-
-
... More
S&F in Repair Brass chromium plated tubular towel rail 20mm dia 60cm long with and including flanges complete all as specified and as directed.
15
-
-
... More
S & F in repairs soap dish stainless steel as approved by GE complete all as specified and as directed.
25
-
-
... More
S & Fin repairs for PVC (SWR) pipes, bore of pipe in 110mm, single socketed, in any length, with rubber ring joints, laid in floors or fixed to walls Complete all as specified and as directed.
35
-
-
... More
S&F in repairs PVC (SWR) pipe single socketed in any length with rubber ring joints,laid in floors 75mm dia Complete all as specified and as directed.
40
-
-
... More
Supply and fixing in repairs Low density polyethylene pipes (LDPE) of pressure rating 6 kg/ cm2 of 40 mm dia bore for wash hand basin Complete all as specified and directed.
60
-
-
... More
S&F in repairs PVC(SWR) branch pieces, single (Single Y) equal or unequal or with parallel branches 75mm dia Complete all as specified and as directed.
5
-
-
... More
S & F in Repair for PVC (SWR) bends, any radius, bore of pipe in 75mm with cement solvent in position Complete all as specified and as directed.
10
-
-
... More
S & F in Repair for PVC (SWR) bends, any radius, bore of pipe in 110mm with cement solvent in position Complete all as specified and as directed.
10
-
-
... More
S&F rotational moulded polethylene water tank of 500 ltrs capacity, ISI Marked, white coloured (cylindrical vertical with closed top with suitable size of M S Tasla with suitable locking system) hoisted and fixed in position all as pacific SSR Part- I including dismantling of existing water tanks capacity n exc 500 ltr complete all as specified and directed.
10
-
-
... More
S&F rotational moulded polethylene water tank of 1000 ltrs capacity, ISI Marked, white coloured (cylindrical vertical with closed top with suitable size of M S Tasla with suitable locking system) hoisted and fixed in position all as pacific SSR Part- I including dismantling of existing water tanks capacity n exc 1000 ltr complete all as specified and directed.
7
-
-
... More
S&F in Repair Stainless Steel Plate Rack of size 31'' x 30'' x 10'' with using stainless steel sheet of 0.63mm thickness Fixed with Rawl plug and screw. complete all as specified and as directed.
5
-
-
... More
S&F in Repair stainless steel sinks with drainage board made of 1mm thick stainless steel sheet for kitchen or laboratory with plugs washers and waste pipe including fixing cantilever brackets and connecting union to pipe overall size not less than 915mm x 460mm and bowl size 410mm x 330mm x160mm.complete all as specified and as directed.
5
-
-
... More
S & F in Repair 600mm x 450mm bevelled edge mirror of selected quality glass, mounted on 6mm thick AC building board or commercial plywood and fixed to wooden plugs with chromium plated brass screws and cup washers complete all as specified and as directed.
10
-
-
... More
S & F in repair PVC floor trap with CP grating weight of grating not less than 35 grams joints to waste pipe in run lead joint dia of outlet 75 mm of floor, trap with deep water seal and of heavy weight coated with tar/black bitumen paint including making good with existing surface by provision of tiles and refilling of the dismantel mnaterials complete all as specified and directed.
11
-
-
... More
S&F in repairs of loosed window glasses not exceeding 1.50 Sqm with oil putty complete with making good complete all as specified and directed.
200
-
-
... More
Supply and fixing 3 mm thick figured glass ordinary quality and size in any type of frames and glazing with oil putt (or beading) in square exc. 0.5 Sqm each.with hacking out of old glasses Complete all as specified and directed.
50
-
-
... More
S & F for 3 mm thick sheet glass, ordinary quality and glazing with oil putty in square n. exc. 0.5 Sqm in each pane for steel/ aluminium windows with hacking out of old glasses compete all as specified as directed.
120
-
-
... More
Supply and fixing in repairs GI wire cloth power woven 0.56 mm nominal dia of wire and average width of aperture 1.40 mm and fixed with tinned tacks or galvanized wire staples for steel window and ventilator including providing MS beads and SS screws . Complete all as specified and directed.
100
-
-
... More
S & F in repairs GI wire cloth 0.56 mm nominal dia of wire and average width of aperture 1.40 mm and fixed with tinned tracks or wooden beeding patti.to gauge door shutters and wooden windows compete all as specified as directed.
100
-
-
... More
Supply and fixing in repairs Aluminium wire cloth power woven 0.45 mm nominal dia of wire and average width of aperture 1.40 mm and fixed with tinned tacks or galvanized wire staples for Aluminium window and ventilator complete all as specified and directed.
20
-
-
... More
M&L for welding in repairs exc. 2.5cm but n exc. 5cm in length, thickness of metal to welded exc 6mm but n exc 9mm for steel windows, ventilators door frames, door hinges, door springs etc compete all as specified as directed.
63
-
-
... More
S & F in repairs curtain rod of CP MS 25 mm dianot less than 1.5mm thickness with chromium plated projected bracket both side as per sample fixed in position by drilling holes in walls and fixed the brackers with rawl plug and steel screw compete all as specified as directed.
60
-
-
... More
M&L for drilling holes for pipes etc in cadappa/granite including RCC slab nexc 25mm dia and nexc 100mm depth
12
-
-
... More
M&L Double action floor spring hydraulically regulated made ISI marked make: Dorma up of minimum 1.25 mm thick aluminium alloy sheet foundation box, main body with stainless steel cover, governing pivot made of brass, other parts made of mild steel heavy duty and fixed all as specified and directed.
3
-
-
... More
Complete removal of existing treatment of wall and applying 2 coats of cement putty with primer in between 6 hrs interval, then applying 2 coats of Oli bound distemper any colour as approved by GE.
30
-
-
... More
M&L preparation new or previously untreated steel surfaces of any description over 10 cm width or girth and applying two coats of synthetic enamel paint over and including one coat of red oxide zinc chrome primer complete all as specified and directed.
50
-
-
... More
M&L for preparing newly plastered walls surfaces and applying two coats of oil bound distemper over 1mm thick wall care putty complete all as specified and directed.
100
-
-
... More
M&L for preparing newly plastered walls surfaces and applying two coats of cement base paint over a coat over one coat primer complete all as specified and directed.
100
-
-
... More
M&L for Complete removal of existing treatment of wall and applying 2 coats of cement putty with primer in between 6 hrs interval, then applying 2 coats of exterior emulsion (weather proof) any colour as approved by GE.
30
-
-
... More
M&L for preparing newly plastered surfaces and applying three coats of white wash on ceiling complete all as specified and directed.
50
-
-
... More
M&L for brick work with fly ash bricks, straight or curved on plan exc. 6 m mean radius, built in CM (1:6) complete all as spd as directed
20
-
-
... More
Demolition of brick work or stone/ boulder masonry, built in cement mortar or cement lime mortar including all quoins, arches, pillars etc but excluding ashlar facing dressed stone work and precast concrete articles complete all as specified and directed.
20
-
-
... More
Providing & fixing in repairs false ceiling at all heights with GRG (Glass Fiber Reinforced Gypsum) false ceiling tiles of Size 595x595 mm of approved texture, design and patterns having moisture content less than 2%, humidity resistance of 99%, NRC0.50 to 0.75 as per IS 8225:1987, Noncombustible as per BS 476 (part 4)-1970 and light reflectance of 85% (minimum) to be laid in true horizontal level suspended on inter-locking metal T-Grid of hot dipped galvanized iron section of 0.33mm thick (galvanized @ 120 grams per sqm including both sides) comprising of main-T runners of size 15x32 mm of length 3000 mm, cross - T of size 15x32 mm of length 1200 mm and secondary intermediate cross-T of size 15x32 mm of length 600mm to form grid module of size 600 x 600 mm, suspended from ceiling using galvanized mild steel items (galvanizing @ 80 grams per sqm) i.e. 50 mm long, 8 mm outer diameter M-6 dash fasteners, 6 mm dia fully threaded hanger rod up to 1000 mm length and L-shape level adjuster of size 85x25x2 mm. Galvanized iron perimeter wall angle of size 24x24x0.40 mm of length 3000 mm to be fixed on periphery wall / partition with the help of plastic rawl plugs at 450 mm center to center and 40 mm long dry wall wood screws. The work shall be carried out as per specifications, drawing and as per directions of the Engineer-in-Charge. With Fully perforated 10 mm Thick Square edged GRG false ceiling tiles.
400
-
-
... More
Supply and fixing in repair vitreous chinaware one piece EWC with built in twin Flushing fittings including close PP white seat cover of same make closed pattern with flat bottom, and cover and mild steel chromium plated or aluminised hinging device and flush pipe complete all as specified and directed.
4
-
-
... More
S&F in repairs Health Faucet with 8 mm dia one meter long flexible tube and wall hook chromium plated, screwed down, for iron pipe or for brass ferrule complete all as specified and directed.
4
-
-
... More
S & F in repair viterous china wash hand basin of required size and shape as approved color Counter top of oval /rectrangular shape of thin rim table top wash basin cafe having etc excluding taps, including brackets and CP waste fitting and 32 mm PVC waste pipe complete all as specified and as directed.
4
-
-
... More
S & F in repairs fancy type designed mirror with fancy type moulding of size 600 x 600 fixed on wall with SS studs at four corners etc completed and as directed.
Note:- pattern shall be approved by Engineer in charge
2
-
-
... More
Taking down carefully old U/S point wiring copper /Aluminum (light/ fan / sockets/ power) complete with switches, sockets, ceiling roses, lamp holders, brackets & other fitting & fixtures connected, and making good to disturbed surfaces as directed.
175
-
-
... More
Taking down electric meter and disconnecting, removing to store for keeping in safe custody for refixing etc Complete all as specified & as directed.
2
-
-
... More
Fixing only and connecting electric meter upto 25 Amp(Item received form ser No 127 here in before) complete all as specified and as directed.
2
-
-
... More
M&L for point wiring with FRLS PVC insulated, un-sheathed, multi stranded copper conductor cable of 1.5sqmm size, 1100 volts, drawn through & including concealed 20 mm rigid non metalic PVC conduit with all accessories fixed on wall/ceiling/truss including FRLS PVC insulated, unsheathed, multi stranded copper conductor cable of 1.5sqmm size as earth continuty conductor connected to common earth dolly including required numbers and size of sunk cast pressed steel terminal box made out of MS sheet 1.25 mm thick for mounting of fittings like switches, switch sockets, sockets, regulators etc with 3 mm thick hylum laminated sheet cover including cutting Chases pinning in, for concealed conduit wiring and making goods of disturbed surface not exc 15 cm girth complete all as specified and as directed for:-
NOTE: (a) Colour coding shall be followed as (i) Phase- Red (ii) Neutral - Black (iii) Earth - green (b) Electrical wiring above false ceiling shall be drawn through medium grade PVC conduit.
-
-
-
... More
One light point / Fan point / Exhaust point / Bell point controlled by one 5A switch
30
-
-
... More
One 5A flush type socket point on same board board
25
-
-
... More
One 5A flush type switch socket point on independent board
20
-
-
... More
One light point controlled by two way switch.
2
-
-
... More
All as per Srl item No 129 here in before but One 3 pin socket outlet 15 Amp independent with cable of size 2.5 Sqmm for wiring and earth wire
20
-
-
... More
M&L for point wiring with FRLS PVC insulated, un-sheathed, multi stranded copper conductor cable of 1.5sqmm size, 1100volts, drawn through & exisiting rigid non metalic PVC conduit with all accessories fixed on wall/ceiling/truss including FRLS PVC insulated, unsheathed, multi stranded copper conductor cable of 1.5sqmm size as earth continuty conductor connected to common earth dolly including required numbers and size of sunk cast pressed steel terminal box made out of MS sheet 1.25 mm thick for mounting of fittings like switches with 3 mm thick hylum laminated sheet cover plate in any size fixed on wall for fixing the switches, switch sockets, sockets, regulators etc complete all as specified for:-
NOTE: (a) Colour coding shall be folowed as (i) Phase- Red (ii) Neutral - Black (iii) Earth - green (b) Electrical wiring above false ceiling shall be drawn through medium grade PVC conduit.
-
-
-
... More
One light point / Fan point / Exhaust point / Bell point controlled by one 5A switch
35
-
-
... More
One 5A flush type socket point on same board board
15
-
-
... More
One 5A flush type switch socket point on independent board
16
-
-
... More
One light point controlled by two way switch.
2
-
-
... More
All as per Srl item No.131 here in before but One 3 pin socket outlet 15 Amp independent with cable of size 2.5 Sqmm for wiring and earth wire
10
-
-
... More
S&F switch piano flush type single pole one way 5 Amps Complete all as specified & as directed.
70
-
-
... More
S&F in repairs Modular switch one way 6 Amp, one module,. Complete all as specified & as directed.
15
-
-
... More
S & F in replacement of switch, piano flush type, single pole, one way, 5/6 Amps complete all as specified and directed.
30
-
-
... More
Supply and fix switch sockets combination 5 pin 5 Amps flush type 240 Volts AC complete all as specified and directed.
16
-
-
... More
S&F in repairs Modular Switch one way 16 Amp, one module Complete all as specified & as directed.
10
-
-
... More
S & F in replacement of Bell push, 5/6 Amps, 240 volts SP complete all as specified and directed.
10
-
-
... More
S&F in repairs Modular Bell push 6 Amp one moduleComplete all as specified & as directed.
6
-
-
... More
S&F switch Socket combination 2 in 1, 3 pin 5 Amp flush type.Complete all as specified & as directed.
10
-
-
... More
S&F in repairs Modular Socket 6 Amp, 2 / 3 pin combined 2 module, Complete all as specified & as directed
30
-
-
... More
S&F switch socket combination 2 in 1, 3 pin 6 Amp and 16 Amps Complete all as specified & as directed
15
-
-
... More
S&F in repairs Modular socket 6A/16A, 2/3 pin combined 2 module. Complete all as specified & as directed.
5
-
-
... More
S & F in replacement of Bell, DINGDONG type, 6 Amps, 240 volts, SP complete all as directed.
4
-
-
... More
S&F Lamp holder (batten/angle ) PVC/Polycarbonate type with back plate for batten/angle fittings.Complete all as specified & as directed.
10
-
-
... More
S&F in repairs Lamp holder (batten/angle ) PVC/Polycarbonate type with back plate for batten/angle fittings.Complete all as specified & as directed.
10
-
-
... More
S & F in replacement of Ceiling rose, PVC/polycarbonate insulated body type, 3 terminal, 240 volts, 5 Amps complete all as specified and directed.
25
-
-
... More
S & F in repairs rechargeable Lamp LED 15 Watt 230 Volt complete all as specified and directed.
20
-
-
... More
S & F in repairs LED Tube light fittings 20 Watt (T-8 ), 4' complete with retrofit tube including connecting up with 3 core flexible copper conductor cable of suitable size Complete all as specified & as directed.
20
-
-
... More
S & F in repairs LED Tube light fittings 10 Watt (T-8 ), 2' complete with retrofit tube including connecting up with 3 core flexible copper conductor cable of suitable size Complete all as specified & as directed.
15
-
-
... More
S&F in repairs LED bulk head luminaire hexafit 10 watt LED environmental friendly, ultra modern, energy saving , surface mounted, decorative hexagonal bulk head back lit LED luminaries comprising of high brrightness LED complete all as specified & as directed.
5
-
-
... More
S & F in repairs surface mounted LED down lighter 15 W LED height 57 - 60 mm with white powder coated aluminium housing with integratged electronic diffuser complete all as specified & as directed.
3
-
-
... More
S &F in repairs Recess mounting LED ultra slim Ceiling light 2'X2', 35/36 Watt complete all as specified and directed.
2
-
-
... More
S &F in repairs surface mounting type LED ultra Ceiling light 2'X2', 28 Watt complete all as specified and directed.
Make: C&S/Havells/Bajaj/Phillips / Crompton as approved by GE.
2
-
-
... More
S &F in repairs surface mounting type LED ultra Ceiling light 1'X1', 18 Watt complete all as specified and directed.
4
-
-
... More
S& F in repairs round shape 10 watt 220 volts AC recessed type with high efficiency PMMA diffuser soft glare free light complete with drivers, holders, LED lamp suitable for roof ceiling including connecting up with three core flexible copper conductor cable of suitable size complete all as specified & as approved by GE.
10
-
-
... More
S&F in repairs stepped, (socket/switch type) electronic fan regulator 180 Watt, 240 Volts. flush type Complete all as specified & as directed.
30
-
-
... More
M & L in repairs sub main wiring with 2 run of FR PVC insulated & unsheathed multistranded copper conductor of nominal cross sectional area 4.0 sqmm alongwith one run of FR PVC insulated & unsheathed multistranded copper conductor of nominal cross sectional area 4.0 sqmm as earth continuity conductor drawn in & including PVC conduit all as directed.
40
-
-
... More
M & L in repairs sub main wiring with 2 run of FR PVC insulated & unsheathed multistranded copper conductor of nominal cross sectional area 4.0 sqmm alongwith one run of FRLS PVC insulated & unsheathed multistranded copper conductor of nominal cross sectional area 4.0 sqmm as earth continuity conductor drawn in & including PVC casing & capping complete all as specified and as directed.
80
-
-
... More
M & L in repairs for sub main wiring with 2 run of FR PVC insulated & unsheathed multistranded copper conductor of nominal cross sectional area 6.0 sqmm alongwith one run of FRLS PVC insulated & unsheathed multistranded copper conductor of nominal cross sectional area 6.0 sqmm as earth continuity conductor drawn through in & including PVC conduit complete all as specified and as directed.
40
-
-
... More
M & L in repairs for sub main wiring with 2 run of FR PVC insulated & unsheathed multistranded copper conductor of nominal cross sectional area 6.0 sqmm alongwith one run of FRLS PVC insulated & unsheathed multistranded copper conductor of nominal cross sectional area 6.0 sqmm as earth continuity conductor drawn through in & including PVC casing & capping complete all as specified and as directed.
50
-
-
... More
M & L in repairs sub main wiring with 2 run of FR PVC insulated & unsheathed multistranded copper conductor of nominal cross sectional area 4.0 sqmm alongwith one run of FRLS PVC insulated & unsheathed multistranded copper conductor of nominal cross sectional area 4.0 sqmm as earth continuity conductor drawn in existing conduit all as directed.
50
-
-
... More
M & L in repairs sub main wiring with 2 run of FR PVC insulated & unsheathed multistranded copper conductor of nominal cross sectional area 6.0 sqmm alongwith one run of FRLS PVC insulated & unsheathed multistranded copper conductor of nominal cross sectional area 6.0 sqmm as earth continuity conductor drawn in existing conduit all as directed.
60
-
-
... More
S&F in repairs single pole and neutral enclouser having IP -67 protection with a three pin & earth plug with socket complete and one SP, 20 A , 240 V, MCB complete all as specified and directed
8
-
-
... More
S&F in repairs sheet metal enclousers (DBS) when MCBs to be used 4 way, 240 Volts double door single pole & neutral with 200 Amps rated bus bar complete all as specified and as directed.
4
-
-
... More
S&F in repairs sheet metal enclousers (DBS) when MCBs to be used 8 way, 240 Volt, double door single pole & neutral with 200 Amps rated bus bar complete all as specified and as directed.
4
-
-
... More
S&F in repairs sheet metal enclousers (DBS) when MCBs to be used 12 way, 240 V, double door single pole & neutral with 200 Amps rated bus bar Complete all as specified & as directed.
1
-
-
... More
S&F in repairs sheet metal enclousers (DBS) when MCBs to be used 4 way, 415V, double door tripple pole & neutral with 200 Amps rated bus bar Complete all as specified & as directed.
4
-
-
... More
S&F in repairs MCB 415V, 10KA, TPN , 63Amps to 100Amp complete all as specified and directed.
15
-
-
... More
S&F in repairs MCCB 415V, 16KA, 4 Pole , 63-100 Amps to 100Amp complete all as specified and directed.
1
-
-
... More
S&F in repairs MCB single phase and neutral 16A-63A, 230V 10KA. B' curve type complete all as specified and directed.
10
-
-
... More
S&F in repairs MCB SP 6A-32A, 230V. 10KA. B' curve type complete all as specified and directed
10
-
-
... More
S & F in repairs Cable weather proof flat twin core with aluminium conductor multi stranded of size 10 sqmm, 1100Volts grade complete all as specified and directed.
50
-
-
... More
M&L for Earthing complete with using GI earth plate electrode 600x600x6.0 mm thick burried directly in ground (earth pit not less than 2.25 mtr deep below ground level ) with top edge of the plate not less than 1.5 mtr below normal ground level and earth plate surrounded with adequate quantity of charcoal dust mixed with salt to a packed thickness off 15 cm all around the plate with using 4 mm dia GI Wire as earth lead moulded and retreived to earth plate at one end and connected to main switch / control board at another end with and including 15 mm dia GI light grade from upper end of earth plate upto external face of the wall of the building including 20 mm dia bore GI pipe light grade as water pipe from chamber to upper edge of the plate GI funnel with wire mess fixed on water pipe and provison of PCC 1:2:4 type B-1 (Using 20 mm Dia graded stone aggregate) duly reinforced with mild steel round bar 6 mm dia @ 150 mm c/c both ways with 10 mm dia mild steel bars as in lifting handle with and including necessarry excavation and earth work including laying the pipe concealed in floor / wall allas per plate NO-3 of SSR Part-I complete all as specified and directed and testing on completiopn (Note:- If the desired resistance is not found earthing shall be done by the contractor at no extra cost to Govt).
2
-
-
Evaluation Notes How It Works ?
Potential Partner
Select Your Requirements