Military Engineer Services Tender
If you're a registered bidder for etender UP and want to inquire about any e-tender UP government has posted, this is your stop. No need to enter every detail on the website of <a href="https://etender.up.nic.in">etender.up.nic.in</a> - BidAssist filters will help you find the exact UP etender you're looking for. Read to learn how to search & bid for etender UP.
Military Engineer Services - MES Tender
Civil And Construction
Road Construction
Building Construction
Eprocure
Opening Date10 May 2023
Closing Date7 Jun 2023
Tender Amount₹ 45,00,000
Costs
EMD
₹ 90,000Document Cost
₹ 500Tender Fee
Refer Documents
Summary
8261 Welcome Maint To Offrs Md Accn In New And Old Bwl Area Under Ge (east) Bareilly.
Description
Scription for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user
Contact
Tender Id
2023_MES_594374_1Bid Award Id
ViewTender No
8261/E8Tender Authority
Military Engineer Services ViewPurchaser Address
-Website
http://http://mes.gov.in/
GEM & Bid Advisory Services
Get portal registration, tender bidding, product/service listing or vendor/MSME certification services at a nominal cost
BOQ Items
Taking down shutter of any description exc. 1 sqm but n.exc 2 sqm each and removing from site complete all as specified and directed.
20
-
-
Taking down shutter and refixing with easing in same opening of any description exc. 1 sqm but n.exc 2 sqm each complete all as specified and directed.
5
-
-
Dismantling, floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises complete all as specified and directed.
780
-
-
Dismantling of stone slabs and tiles of any description or thickness in floors, aprons Laid, bedded and pointed in any mortar etc. complete all as specified and directed.
4
-
-
Demolition of cement concrete (un-reinforced) in ground floors and pavings not exceeding 15 cm thickness below or above ground level complete all as specified and directed by Engineer-in-Charge.
15
-
-
M&L 75 mm thick PCC 1:4:8, type D-2 (using 40mm graded stone aggregate) as in sub base floor / pavings complete all as specified and directed.
50
-
-
Demolition of brick work or stone/ boulder masonry, built in cement mortar or cement lime mortar including all quoins, arches, pillars etc but excluding ashlar facing dressed stone work and precast concrete articles complete all as specified and directed.
5
-
-
Demolition of concrete of any description and in any position not otherwise specifically provided for complete all as specified and directed.
10
-
-
Taking down eaves gutters and rainwater pipes (any size or pattern), including all fittings, heads, shoes, bends, swan-necks, etc., including cleaning or refixing or removal to Store (measured overall as fixed along the centre line over fittings and accessories complete all as specified and directed.
56
-
-
M&L providing non- skid glazed ceramic tiles coloured 7 - 8 mm thick (square/rectangular) area of each tile exceeding 0.06 sqm but n xc 0.11 sqm, in floor etc set and joited with neat cement slurry and pointed in coloured cement to match coloured tiles including 15 mm thick cement screed bed in CM 1:6 complete all as specified and as directed. Note : Engr-in-Charge will select sample from latest catalouge.
100
-
-
M&L providing non- skid glazed joint free ceramic tiles coloured 7-8 mm thick (square/rectangular) area of each tile exceeding 0.11 sqm but n exc 0.18 sqm, in dado/skirting etc including 10 mm thick rendering in CM mortar 1:4 set and joited with neat cement slurry and pointed in coloured cement including to match coloured tiles complete all as specified and as directed. Note : Engr-in-Charge will select sample from latest catalouge.
150
-
-
M & L Glazed ceramic coloured tiles in vertical surface 300 mm x 450mm x 7 mm thick set and jointed in neat cement slurry and pointed in white cement or coloured cement to match the surface incl 10 mm thick rendering in cement mortar 1:4 complete all as specified and directed. Note : Engr-in-Charge will select sample from latest catalouge.
200
-
-
M&L for Vitrified light shade coloured ceramic tiles 8-10 mm thick (square/ rectangular) polished area of each tile not exceeding 0.36 sqm in floors etc., set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tile over and incl 15mm thick screed bed in CM 1:6 complete complete all as specified and as directed. Note : Engr-in-Charge will select sample from latest catalouge.
305
-
-
M&L for Vitrified light shade colored ceramic tiles 8-10 mm thick (square/rectangular) polished area of each tile not exceeding 0.36 sqm in skirting/dado etc., set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tile over and incl 10mm thick rendering in CM 1:4 complete complete all as specified and as directed. Note : Engr-in-Charge will select sample from latest catalouge.
25
-
-
M&L for vitrified ceramic exterior heavy duty out door coloured tiles 12 mm thick (Square/rectangular) polished area of each tile size not exceeding 0.36 sqm on floor set and jointed in neat cement mortar and pointed in white or coloured cement to match over and incl 15mm thick rendering in CM 1:6 complete complete all as specified and as directed. Note : Engr-in-Charge will select sample from latest catalouge.
150
-
-
M&L for 40mm thick plain cement concrete 1:2:4, type B1 (using 20mm graded stone aggeregate) finished the surface even and smooth using extra cement as in floor complete all as specified and as directed.
10
-
-
M&L 15-18 mm thick Granite of any colour (tablee rubbed and polished) as in windows cill, in steps, jambs, pillars, window cills, cooking platforms and like in cement mortar (1:4) including form work, pointing in white cment (1:2) using marble dust with admixture of pigment to match with shade of granite with full round bull nosing edging complete all as specified as directed
40
-
-
M & L for 75mm thick PCC 1:3:6, type C-2 using 40 mm graded stone aggregate as in plinth protection laid in slope in 1:30 in alternative bays not exceeding 3 mtr in length. Exposed surfaces finished even and smooth without using extra cement including raking out joints between panel to panel and panel to wall and plugging the same with bitumen mastic using bitumen and sand mixture in 1:3 complete all as specified and directed.
200
-
-
M&L for brick work with fly ash bricks, straight or curved on plan exc. 6 m mean radius, built in CM (1:6) complete all as specified and directed.
5
-
-
M&L rendering 15 mm thick in CM 1:6 on brick masonary wall surfaces or on other than fair faces of brick masonry finished even and smooth witout using extra cement complete all as specified and directed.
150
-
-
M& L for rendering 15mm thick in cement mortar (1:4),finished even and smooth using extra cement to on brick masonary wall surfaces or on other than fair faces of brick masonary finished even and smooth without using extra cement complete all as specified and directed.
200
-
-
M&L rendering 5 mm thick in CM 1:3 as on concerete surface on ceilings finished even and smooth without using extra cement complete all as specified and directed.
35
-
-
Taking down carefully existing bitumen tarfelt including plastering upto 15mm thick cleaning the surface and make free of dirt, foreign particles, laitance followed by grinding all protrusions to make surface modulated and removing all foreign materials / Bitumenous primer completely , cleaning and washing the existing surface of roof/slab, terraces including flashings and junctions of parapets/Curb walls etc and as directed by Engineer-in-charge.
300
-
-
M&L for providing ement concrete 1:2:4 Type B0 (Using 12.5mm graded stone aggregate) as in bed plate/roof kerb/PCC padding and haunching etec all as specified and directed by Engr in Charge
7.5
-
-
M&L for rendering 10 mm thick in CM 1:3 on concrete surfaces mixed including water proofing compound @ 0.12 ltr per bag of cement or as per manufacturer instruction and finishing the surfaces even and smooth without using extra cement Complete all as specified and directed by Engineer-in-charge.
300
-
-
M&L providing cement slurry @ 3Kg per sqm on existing roof surface before laying PCC/ Plaster.
300
-
-
M&L for repairs to sunken floor slab with the following specifications:-
(a) Demolition of PCC and taking out old brick bat fillihng and roughening surfaces of old concrete floor and wall by picking, sweeping clean and washing down with water to remove dust etc. (b) PCC 1:2:4,type B-0, using 12.5mm graded stone aggregate averaging 50mm thick as in sunken floor,with proper slope towards GI spout. The dia of GI Spuot pipe shall be 50mm Medium grade. The minimum length of Spout shall be 500mm and if any spout comes above chajja than the length of the spout shall be more than Chajja projection. Ends of Spout shall be tippered and any cutting through brick/ RCC structure shall be done by the Contractor rates are deemed to be included of this aspects.
(c) providing 15mm thick cement plaster in cement mortar 1:3 mixed with water proofing compound @ 3% by weight of cement over bottom and vertical surfaces finishing the surface even and smooth with using extra cement. (d) Damp proof course on horizontal / Vertical surfaces with preparation & applying one coat of primer (33% dilution) and two coats of undiluted material @ 10.67 lts per 10 sqm of Make : smart care Damp proof of M/s asian paint or equivelent for water proofing compound.
(e) Graded Brick bats filling under sunken floor of required thickness as per site, (f) PCC 1:3:6,type C-1,using 20mm graded stone aggregate 75mm thick, over brick bats filling as in subbase. Note:- (i) For payment purpose only plan floor area shall be measured. (ii) After Coating of Water proofing compound ponding test shall be carried out by filling the sunken surface with water for 72 Hrs and get approved by Engr-in-Charge if any leakage/ seepage noticed the Contractor will re do the whole process without any extra payment.
20
-
-
M&L for cleaning the newly plastered surfaces throughly with wire brushes and providing water proofing treatment all as given here in after
(a) Bituminous primer @ 0.3lit per Sqm conforming to IS-3384-1986 (b) 3 mm thick APP polymer modified moply FP with minimum wt 3.0 Kg per square metre membrane (one layer) laid by torch application method.
(c ) Applying two coat of bituminous based aluminium paint @ 0.20 Kg in two coats (total in two coats) per square metre over membrane. Complete all as specified and directed by Engineer-in-charge.
(d) The overlaps of APP shall be SSR part 1 and APP shall be laid by expert/ skilled workers only, bitumen based aluminious paint applied by brushes only.
300
-
-
S & F in repair 2nd class hard wood Plain, solid, straight chowkats and frames, wrought, framed rebated on the solid, rounded or chamfered, put together with glue pinned at joints, complete all as specified as directed
0.25
-
-
S&F for Pressed steel frames Size 125mm x 60 mm for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc., complete all as specified and directed
18
-
-
S&F for 35 mm thick factory made flush shutters, solid core construction, with block board core and plywood face panels, commercial type on both sides complete all as specified and directed.
4
-
-
S&F for 40 mm thick factory made flush shutters, solid core construction, with block board core and plywood face panels, commercial type on both sides complete all as specified and directed.
4
-
-
Supply & fixing 30mm thick WPC factory made moulded door shutter consisting of solid core single leaf flush door of 25mm thickness, lipped with 15mm (5mmx3) thick x 30mm width on one stiles and top rails & 10mm (5mm x 2) thick x 30mm width on the other stiles & bottom rails, The inner panel laminated with 2mm thick termite proof, water proof and fire resistant moulded PVC sheet with 2,4,6 raised panel design in different plain and / or prelam colour on one side after routing the moulded design on flush door & 2mm plain and / prelam PVC sheet on other side using rubber based adhesive on flush door & solvent cement adhesive on the lipping etc.completed as per specified and directed.
14
-
-
S&F 35mm thick factory made glazed and skeleton door shutters open rebated of second class hard wood rail and styles (Hollock), prepared to receive glass/gauge etc without sash bars, edges of framing plain cham-fered or rounded, mitred and rebated sash bars, any numbers the size of rails & style as specified in SSR Part-I (2009) section 8 and as per IS-1003(Part-I) kiln seasoned as per IS-1141 and chemically pressure treated as per IS-401 complete all as specified and directed.
(Note :- S & F wire mess shall be measured and paid for separately)
35
-
-
M&L in repairs for machine pressed pre-cast concrete interlocking coloured paver block, Glossy finish and shape and size conforming to IS-15658-2006 of 80 mm thickness M-40 grade with grey cement and pigment laid dry over and including 50 mm thick stone dust or sand base and compacted using vibrator complete all as specified and directed.
50
-
-
S&F mild steel window grills box type framed work as in window guard bars, grills or forged into spikes, framed balusters, walkway railing and similar work including welding complete FE-290 grade E-165 all as specified and directed.
20
-
-
M&L in repairs for machine pressesd coloured glazed chequered cement concrete tiles 25mm thick Glossy finish with mixture of grey and white cement in equal proportions and no pigment set & jointed in neat cement slurry & pointed in coloured cement to match the shade of tiles over and including screed bed or bedding layer of mortar 20 mm thick, in cement mortar (1:6), complete all as specified and directed.
50
-
-
M&L Machine cut pre polished kota stone slab flooring 20-22 mm thick and size exc 0.16 sqm jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and treating the surface incl complete complete all as specified and directed
30
-
-
S&F Powder coated aluminium sliding windows frame with movable shutter ( sliding on minimum two PVC roller of best quality, for each shutter on three tracks with stainless steel mosquito proofing and glazing shutter and incl 5.50 mm thick glass & stainless steel wire messs fixed with neoprene rubber gasket with aluminium beading, clips,frame made with aluminium specified and directed as appended below:-
(i) Window frame :95x38mm X 1.15 mm thick for three tracks.
(ii) Top/bottom rail and style / rail of shutter : 15x37.5x1.15 mm thick and over.
(iv) stainless steel wire cloth 0.45mm nominal dia of wire and average width of aperature 1.40mm and fixed in aluminium window or alongwith F/Y section fixed with aluminium wire staples complete.
(v) Aluminium fittings such aluminium suitable handle with auto interlock cap with suitable size .
(vi) Making good of wall surfaces with silicon to match with existing surfaces complete all as specified and directed.
25
-
-
S&F Powder coated aluminium ventilators box type with louvers & wire mesh fixed with neoprene rubber gasket, aluminium beading, clips. Frame made with powder coated aluminium section of size as appended below (i) frame :45.2mm x35mm X 1.15 mm (ii) Aluminium beading - 0.7mm thick (iii) Glass louvers depth 6 inch. Blade Angle: 38 degrees and thickness of blade 2.02 mm with 106.25 mm spacing.
(iv) Aluminium neccessary fittings complete as required.
(v) Making good of wall surfaces with silicon to match with existing surfaces complete all as specified and directed.
3.96
-
-
M&L for modular cupboards (kitchen cabinet) made of 18 mm thick prelaminated PVC board exterior grade with one side decorative lamination glossy finish & other side plain white as in shelves, sides, back and doors including PVC lipping on all exposed edges of same texture & shade to match that of laminate, fitted with selected qualitypiano hinges / modular type stainless steel hydraulic concealed hinges Make: Hettich cat No ONSYS 4447i product code 928143200 /Kaff nickel plated SC hinge 100°code No KHSC-0/Godrej product code: 6933, Baan code LKYAHCHR4, fancy type 200 mm long stainless steel handles etc, complete all as specified and directed. Make pf pvc board- Rajshri/greenply/ centuryply
Note: (i) Area shall be measured flat on face of the cupboard.
(ii) Design & layout of cabinate and pattern / colour of laminate to be approved by GE.
50
-
-
S&F for 18 mm, prelaminated PVC board exterior grade with one side decorative lamination glossy finish & other side plain white as in shelves, sides, back and doors including PVC lipping on all exposed edges of same texture & shade to match that of laminate, fitted with piano hinges, wardrobe/ finch lock & PVC lipping on all exposed edges of same texture and shade, with complete all as specified. Make- Rajshri/greenply/ centuryply
Note: 1) Design & layout of wardrobe and pattern / colour of lamination to be approved by GE. 2) Frame to be fixed to walls, soffits & base of cupboard with fasterners
70
-
-
S&F for 12 mm thick prelaminated PVC board exterior grade with one side decorative lamination glossy finish & other side plain as in cupboard shelves & partitions including fixing to wall, soffits & base of cupboard by powder coated aluminium cleat (colour of powder coated to match colour / shade of laminate) also including PVC lipping on all exposed edges of same texture & shade to match the laminate complete all as specified Make- Rajshri/greenply/ centuryply
Note: 1) Design & layout of wardrobe and pattern / colour of lamination to be approved by GE.
110
-
-
S&F in repairs 40mm dia and 75mm long, extrruded fancy type SS handle for kitchen cup boards shutters, cabinets, crocery shelf drawers fixed with nuts, screw and washer of mild steel bright finished, complte all as specified.
25
-
-
M& L for repairing to existing rolling shutters of any size , replacing the bottom lock plate/bracket plates/crank handles/curtain / guide channel/hood cover/ lath section /pulling hooks/rollers/ of any other part of rolling shutters with new and including taking down and wellding of any part o rolling shutter (if required) at same place after making the shutter smooth functional with neccessary fittings required all as specified and directed..
5
-
-
S&F in repair 40mm dia cupboard Knobs fixed with necessary screws, nuts etc all as specified and directed
30
-
-
S & F in repair 300 mm long Aluminium, anodised, barrel tower bolts of extruded section and fixed
35
-
-
S & F in repair 150 mm thick Aluminium, anodised, barrel tower bolts of extruded section and fixed
35
-
-
S&F in repair 150mm size aluminium handles, cast type anodised completed all as specified and directed.
35
-
-
S&F in repair fancy type 200 mm size stainless steel handles, completed all as specified and directed.
80
-
-
S&F in repar 100 mm in size butt hinges medium weight stailess steel colled rolled complete all as specified and directed by Engineer-in-Charge.
30
-
-
S&F in repair 300mm size ordinary mild steel , rat tailed rod pattern spring including roller and roller plate welded to mild steel frame.fixed in repair complete all as spd & directed.
60
-
-
S&F in repair 300 mm long mild steel sliding door bolts plate type stone enamelled black with bright bolt not less than 16 mm dia with and including a minimum of 6 bolts and nuts, 04 Nos on bolt plate and 02 Nos on staple plate and fix complete all as specified and directed
30
-
-
S&F in repair 300 mm long Stainless steel sliding door bolts( without locking arrangements) not less than 16 mm dia with and including a minimum of 6 bolts and nuts, 04 Nos on bolt plate and 02 Nos on staple plate and fix with as welding complete all as specified and directed
20
-
-
S&F solid PVC door frames of size 50 mm x 47 mm made out of 5 mm plain colour PVC sheet reinforced with M.S. square tube, suppling & fixing in opening as per specification & drawing.
5
-
-
S&F factory made solid panel PVC door shutter 30 mm thick (Style) consisiting of frame made out of MS tubes for top & bottom rails M.S. frame shall be covered with heat moulded plain coloured PVC 'C' channel having a PVC sheet strip of 20 mm which stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rails & bottom rail on either side & as gap insert for top rail & bottom rail, panelling of plain colour PVC sheet to be fitted in the M.S. frame welded/sealed to the stiles and rails with suitable PVC sheet beading and jointed together with solvent cement suppling & fixing in the frame at site as per specification & drawing.
12
-
-
S&F 30 mm thick factory made both side Prelam PVC sheet used instead of Plain colour PVC sheet. Stile and rails feathered at edges consisting of frame made out of M.S. tubes for top & bottom rails, M.S. frame shall be covered with heat moulded palin colour PVC `C' channel heaving a Panelling of plain colour PVC sheet to be fitted in the M.S frame wedded/ sealed to the stiles, & rails with suitable PVC sheet beading, and joined together with solvent cement, suppling & fixing in the frame at site as per specification & drawing.
3
-
-
S&F mild steel window grills box type framed work as in window guard bars, grills or forged into spikes, framed balusters, walkway railing and similar work including welding complete FE-290 grade E-165 all as specified and directed.
80
-
-
S&F for steel windows/ventilators conforming to IS-1038 with side hung shutters including box type hinges with 2 Nos MS 100mm size tower bolt over MS flat iron for each openable leaf & Z section handle and steel peg stay complete without glazing bars, dovetailed or welded including one shop coat of Red Oxide Zinc chromate primer complete all as specified and directed.
(Note :- Wire cloth shall be measured and paid for separately).
5
-
-
S&F for steel windows conforming to IS-1038 with side hung shutters including box type hinges with 2 Nos MS 100mm size tower bolt over MS flat iron for each openable leaf & Z section handle and steel peg stay complete with glazing bars, dovetailed or welded including one shop coat of Red Oxide Zinc chromate primer complete all as specified and directed.
(Note :- Glass shall be measured and paid for separately).
5
-
-
S&F for steel ventilators fixed type, with glazing bars complete welded including one shop coat of Red Oxide Zinc chromate primer complete all as specified and directed.
(Note :- Glass shall be measured and paid for separately).
1
-
-
M&L in repair for 3mm thick sheet glass ordinary quality and glazing with oil putty in squares not exc. 0.5 Sqm in each pane including Hacking out old, broken glass (any thickness, size quality or description) from metal frames including punching or drilling out old glazing pins/spring clips complete all specified and as directed.
50
-
-
M&L for 3mm thick sheet glass ordinary quality and glazing with oil putty in squares not exc. 0.5 Sqm in each pane complete all specified and as directed.
5
-
-
S&F stainless steel wire cloth, 0.56 mm nominal dia of wire and average with of aperture 1.18 mm and fixed with stainless steel wire staples complete all as specified and directed.
6
-
-
S&F in repair stainless steel wire cloth, 0.56 mm nominal dia of wire and average with of aperture 1.18 mm and fixed with stainless steel wire staples in M S window / wooden shutter complete all as specified and directed
50
-
-
S&F rotational moulded polethylene water tank of 1000 ltrs capacity, ISI Marked (cylindrical vertical with closed top with suitable size of M S Tasla with suitable locking system) hoisted and fixed in position all as specified in SSR Part- I including dismantling of existing water tanks capacity n exc 1000 ltr complete all as specified and directed.
30
-
-
S&F rotational moulded polethylene water tank of 500 ltrs capacity, ISI Marked (cylindrical vertical with closed top with suitable size of M S Tasla with suitable locking system) hoisted and fixed in position all as specified in SSR Part- I including dismantling of existing water tanks capacity n exc 500 ltr complete all as specified and directed.
20
-
-
Disconnecting existing tanks exc 500 ltr & n exc 1000 ltr, setting aside (or lowering if required) for repairs, cleaning, including cleaning and removing all scale and dirt, etc. from tanks and form mouths of circulating pipes, etc. and hositing if required reconnecting and re-fixing in position. (Cleaning repairing etc. measured separately).
80
-
-
S&F in repair service tank lid / cover of size 0.45 m dia and 0.20 m height made with 0.9mm thick GI sheet shaped into hollow semi sphere fixed to over head PVC service tank of 250 ltrs to 1000 ltrs capacity incl necessary nut, bolts washers and locking arrangement complete all as specified and directed.
200
-
-
S&F 20mm bore ball brass valve high pressure with polythene float and fly nut complete, screwed for iron pipe or for brass ferrule and fixed complete all as specified and directed.
30
-
-
S&F GI tube 15 mm dia medium grade with all fittings and fixed to wall, ceiling or laid in floors including taking down existing GI tubing 15 mm dia & connections complete all as specified and directed.
100
-
-
S&F GI tube 20 mm dia medium grade with all fittings and fixed to wall, ceiling or laid in floors including taking down existing GI tubing 20 mm dia & connections complete all as specified and directed.
50
-
-
S&F in repairs, vitreous China wash hand basin, white, flat back size 550 x 400mm including CP 15mm dia swan neck pillar tap , 450 mm long HDPE PVC connection, 750 mm long 32mm bore HDPE waste down pipe including Stainless steel brackets all s directed. "Model :of Hindware or equivalent of Parryware, Cera .
20
-
-
S&F in repairs vitreous chinaware coloured wash hand basin with pedestal of size 55X45X82cm complete including fancy CP pillar tap, CP Waste coupling ,waste pipe ,complete fixing arrangement and cutting for and pinning in walls & making good complete all as specifed and directed.
"Model :of Hindware or equivalent of Parryware, Cera .
3
-
-
S&F in Vitreous China counter top oval type coloured wash basin suitable size including swan neck pillar taps with bottle trap but including waste pipe fixing on counter with stainless steel brackets complete all as specified. Make hindware of Ripple star white cat No 91080, Parryware Cat No C0483, Cera Cat No FLS-WHT-0575 .
9
-
-
S&F in repair stainless steel of AE - SI 316 grade tubular towel ring including apair of CP brass bracket complete all as specified.
Model No ACN 1121N Jaquar, Parryware Model No T/6002A1, Cera Model No F5002105
80
-
-
S&F fancy type 15mm dia chromium plated fancy type wall mixer hot & cold with long swan for kitchen sink & WHB fixing and connection to pipes complete all as directed.
Model :ARI 39001B Aria of Jaquar, Hindware Model No F280010 SCP, Cera Model No F2013451
20
-
-
S&F in repairs Brass chromium plated wall mixer 2 in 1 , 15mm for mixing hot & cold water screwd down three joints to steel pipes or unions and plugging and screwed to walls complete all as specified and directed. Model : Cat No florenite 5273UPR of Jaquar or equivalent of Parryware, Cera or Hindware
10
-
-
S&F in repairs brass chromium plated wall mixer 3 in 1, 15mm for mixing hot & cold water screwd down three joints to steel pipes or unions and plugging and screwed to walls complete all as specified and as directed.
Model : Cat No FUS-29281 Fusion of Jaquar ,model of Hindware Cat No F390022, Parryware Cat No G0217A1
10
-
-
S&F in repair fancy type brass chromium plated toilet paper holder, complete all as specified."Model No CAN-1153N Jaquar or equivalent in Hindware, Parryware, Cera ".
30
-
-
S & F in repair fancy type 150mm size square brass CP shower rose all as specified. Model No F 7010507 of Cera or equivalent in Hindware, Parryware, Jaquar ".
35
-
-
S&F in repairs 15 mm dia bib tap fancy type chromium plated with flange quarter turn complete all as specified as directed.
Model :Parryware, Cera or equivalent in Hindware.
200
-
-
S&F in repairs 15 mm dia bib tap cast copper alloy with butterfly handle, screwed down for iron pipe or for brass ferrule and fixed complete all as specified as directed.
60
-
-
S&F in repair fancy type chromium plated brass two way Angle valve suitable for 15mm bore pipe complete all as specified and directed. Model: FUS 29041 Fusion of Jaquar or equivalent in Hindware, Parryware, Cera "
20
-
-
S&F in repairs 15mm bore PVC connections, with PTMT nuts of length 450mm complete all as specified and directed.
35
-
-
S&F in repair fancy type brass chromium plated soap dish of 160x160x90 mm , complete all as specified. Make Jaguar or equivalent
30
-
-
S & F in repairs ISI marked fancy type Pillar Tap of 15mm bore dia, cast copper alloy, with capstan heads, chromium plated, screwed down, high pressure, with long screwed shanks and fly nuts, screwed for iron pipe complete all as specified and as directed
25
-
-
S&F in repair fancy type chromium plated brass angle valve type suitable for 15mm bore pipe complete all as specified.Model : ARI -39053 of Jaquar or equivalent in Hindware, Parryware, Cera.
35
-
-
S&F chromium plated brass tubular towel rail 20 mm dia, D type for wash hand basin centre holed fixed to iron pipe complete all as specified and directed. Make Jaguar or equivalent
25
-
-
S & F in repair fancy type sheet glass shelf assembly consisting of 5.5mm thick sheet glass shelf 12 cm wide with CP bracket gaurd and railling 60 cm long complete all as specified. Model: ACN - 1171N of Jaquar or equivalent in Hindware, Parryware, Cera ".
40
-
-
S & F matt finished SS 125 mm hasp and staple including bolt to hinge plate and fixed with S S screws complete all as spd and directed
20
-
-
S&F for stainless steel matt finish Hat peg set of five tier with necessary fitting completed all as specified and directed
20
-
-
S&F in repair fancy type glass corner 300mm radius of 10mm thick toughned glass with CP railing fixed with screws fancy type complete all as specified . Model: ACN - 1173 of Jaquar or equivalent in Hindware, Parryware, Cera .
100
-
-
S&F in repairs of 20mm dia Gun-metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe and fixed
20
-
-
S&F in repair 15 mm dia fancy type stop cock , chromium plated with long shank and cup (conncelaed type)for iron pipe or for unions and fixed.
20
-
-
S&F in repair vitreous china squatting pan of orrissa pattern long pan size 580 x 440 mm white with "P"or "S" trap size 100 mm dia front or back inlet and integral foot rest any pattern (excluding flushing cistern and flush pipe) including provn of lime concrete bedding complete all as specified. Model: cat no 20076of Hindware, or equivalent Parryware, Cera.
10
-
-
S&F in repair vitreous China coloured European type WC with "P" or "S" trap 1st quality including connection to drain and fixing bolts and PVC sheet cover white complete all as specified.
Make Hindware / parryware or equivalent Model: ACN 20011 (P/S) Jaquar or equivalent in Hindware, Parryware, Cera
50
-
-
S&F in repairs, PVC low level flushing cistern 10 litres capacity, valve less, symphonic action type with float, handle including 32mm dia PVC flush pipe of polyethylene of low or high density & bracket etc complete all as specified and directed.
Model: Sleek fresh dual flush of Hindware or equivalent of Parryware, Cera or Jaquar"
60
-
-
S & F 15 mm dia CP health faucet with 1.0 Meter Long Flexible pipe and holder complete all as specified and directed Model :ALD 573 of Jaquar or equivalent in Hindware, Parryware, Cera
70
-
-
S&F in repair Grating doom 100mm dia of PTMT (Minimum weight 25gms) cement complete all as specified and directed
50
-
-
S&F in repair Grating doom 125 mm dia with waste hole of PTMT (Minimum weight 40gms) cement complete all as specified and directed
50
-
-
S&F in repair PVC (SWR) multifloor trap with grating including jointing with solvent cement floor trap 75 mm dia outlet plain with grating including jointing to waste pipe fixed in cement concrete 1:2:4, type B-1 complete all as specified and directed.
10
-
-
S & F in repairs of ISI marked waste fittings 32mm dia of brass, chromium plated for glazed ware sink, basins etc. with long screwed shanks and fly nuts flange end bedded in red lead cement complete all as specified and directed
20
-
-
S & F in repair 32mm dia PVC waste pipe for sinks/ basin and complete, all as specified.
60
-
-
S&F in repairs Jet spray CP Brass with 1.5m tube completeall as specified and directed.
50
-
-
S&F in repair Brass chromium plated bottle traps for wash basins with inlet and outlet screwed for pipe or connections including necessary packing, unionand cap and fixed in repair for 32 mm bore
10
-
-
S&F in repair PVC (SWR) 75 mm bore pipes single socketed in any length with rubber ring joints fixed to wall and floor with necessary fitting complete all as specified and directed by Engr-in-charge.
28
-
-
S&F in repair PVC (SWR) 110mm bore pipes single socketed in any length with rubber ring joints fixed to wall and floor with necessary fittingcomplete all as specified and directed.
28
-
-
S&F PVC (SWR) 110mm bore bends any radius complete all as specified and directed.
10
-
-
S&F PVC (SWR) 75mm bore bends any radius complete all as specified and directed.
10
-
-
S&F PVC (SWR) 75 mm bore junction single (Single 'T') equal or unequal with access door complete all as specified and directed.
5
-
-
S&F PVC (SWR) 110 mm bore junction single (Single 'T') equal or unequal with access door complete all as specified and directed.
5
-
-
S&F in repair 600 x 450mm bevelled edge mirror 5.5mm to 6mm thick selected quality glass flaw less, firmly mounted on 6mm thick commercial ply wood backing and fixed to wooden plug with chromium plated brass screw and cup washer complete all as specified and directed.
26
-
-
S & F PTMT alloy toilet cabinet with mirror of overall size 350 x 450mm and fixed to wall complete all as specified and directed. (Cat Part No. 551 of Make Prayag or equivalent model)
30
-
-
S&F in repairs Stainless Steel plate rack of size 90x80x25cm made with 1.00 mm thick sheet including taking out existing wooden plat rack, complete all as specified.
20
-
-
S & F for 1 mm thick stainless steel kitchen sink size 590x460x230mm undermount, single bowl (bowl size 540x410x230 mm), incl waste pipe & SS coupling, washers etc. complete all necessary fittings all as specified and as directed.
Model : Cat No BA 711501- satin finish series Alma of Cera or equivalent of Parryware , Nirali , Pearls .
14
-
-
S&F steel work in tubular trusses including special shaped washer etc. complete using ERW or induction butt welded tubes confirming to IS 1161-1979 complete all as specified and directed
500
-
-
S&F Pre-coated galvalume aluminium zinc coating GI based corrugated steel sheet 0.50 mm thick of an colour having tensile strength of 550 mpa as in roof covering / cladding to wall, fixed with self tapping screws as specified.
120
-
-
S&F in repair stainless steel sink, 1.00mm thick for kitchen or laboratory, with plug, waste pipe, washers, including cantilever cast iron brackets, connecting union etc., overall size 495mm x 420mm with bowl size 410mm x 330mm x 160mm, complete all as specified and directed
14
-
-
S&F in repair 20 mm dia stainless steel 1.0 mm thick fancy type SS curtain rods with decorative design matching brackets as approved and knobs (lattu) or end bracket as required & other all neccesary fittings fitted with SS screws etc on each end complete all as specified and as directed.
400
-
-
M & L for Post construction anti termiteTreatment at points of contact of wood work by chemical emulsion (in oil or kerosene based solution) @ 0.5 litre/hole by drilling 6mm dia holes at a downward angle of 45 degree at 150mm centre to centre and sealing the same as specified and directed.
10
-
-
M & L for Post Construction anti termiteTreatment of soil under existing floors using emulsion @ one litre per hole, 300mm apart including drilling and plugging 12mm dia holes with cement mortar 1:2 (1 cement : 2 coarse sand) to match the existing floor soil complete as specified and directed.
10
-
-
M & L for cutting chases of hanging chajjas, pinning in, making good to facings where required and pointing in cement mortar 1:3 to ends or edges of sunshades, shelves, lintels, Chajja ( up to IInd floor) etc making good, cutting out exc 10cm and not exc 40cm girth in RCC chajjas in brick walls complete all as specified and as directed.
100
-
-
S&Fin repairs Rubber strip 15mm, 75mm wide and 1200mm long
40
-
-
S&F Hafele Stainless Steel Security Door chain Antique finish 150mm Your security partner for home
8
-
-
S&F Adjustable 200 Degrees Wide Angle Peephole Door Viewer Peep Sight Hole Home Security (Cooper)
8
-
-
S&F in repair floor door stopper brass body and tongue with hard drawn steel spring complete all as specified and directed.
70
-
-
S& F in repair door closer hydraulically regulated Aluminium (extruded section body), designation No 3, universal type, suitable for door shutters of 851 to 1000 mm in width and of weight between 61 to 80kg and fixed complete all as spd as directed
25
-
-
S & F in repairs for plastic seat cover (plastic water closet seat and cover) closed pattern with flat bottom and Mild Steel chromium plated or aluminized hinging device complete. all as specified.
70
-
-
M & L for preparation of old plastered surfaces of walls including rubbing down and stopping of distemper and painted surfaces and treating oil and greasing spots and applying Two coat of oil bound distemper over a coat of putty complete all as specified and directed
8000
-
-
M & L for preparation of old plastered surfaces of walls including rubbing down and stopping of distemper and painted surfaces and treating oil and greasing spots and applying one coat of oil bound distemper complete all as specified and directed
12000
-
-
M & L for preparation of old plastered surfaces of ceiling including rubbing down and stopping of distemper and painted surfaces and treating oil and greasing spots and applying one coat of oil bound distemper over a coat of putty complete all as specified and directed
1500
-
-
M & L for preparation of old plastered surfaces of ceiling including rubbing down and stopping of distemper and painted surfaces and treating oil and greasing spots and applying two coat of oil bound distemper complete all as specified and directed
750
-
-
M&L for complete removal of existing treatment on ceiling, etc including cleaning of any mortar drops, fungus efflorescent salts etc and preparation of old plastered surfaces and applying two coats of white wash complete all as specified and directed.
1000
-
-
M & L for preparing old plastered surfaces of wall incl removal of existing treatment and applying Two coat of white wash complete at any place /height such as room /stair case /common area etc all as specified and as directed
4450
-
-
M & L for preparation of old painted wood or wood based surface of any description, not otherwise described over 10cm width or girth and applying one coat of synthetic enamel paint complete all as specified and directed
2550
-
-
M & L for preparation of old painted steel and iron surfaces of any description, not other wise described, over 10cm width or girth and applying one coat of synthetic enamel paint complete all as specified and directed.
2500
-
-
M&L for preparation of new or previously untreated wooden or wood based surfaces of any description not otherwise described over 10 cm width or girth and applying two coat of synthetic enamel paint over and including one coat of pink primer complete all as specified and directed.
90.4
-
-
M & L for preparing new plastered surfaces of ceiling and applying two coat of oil bound distemper over a coat of wall care putty complete all as specified and as directed
35
-
-
M&L for preparing newly plastered surfaces and applying three coats of white wash on ceiling complete all as specified and directed.
25
-
-
M & L for preparation of new plastered surface of wall and applying two coats of oil bound distemper over a coat of wall care putty 1mm thick complete all as specified and as directed
150
-
-
Taking down carefully old U/S point wiring copper/Aluminum (light/ fan / sockets/ power) complete with switches, sockets, ceiling roses, lamp holders, brackets & other fitting & Fixtures connected, and making good to disturbed surfaces as directed.
217
-
-
Taking down ceiling/exhaust fan and disconnecting, removing to store for keeping in safe custody for BER or rehanging etc after some minor repair complete all as specified and directed
14
-
-
Taking down main switch / MCB/ DBS including MC BS etc of any size removing for taking credit (credit for above items should be made as per conditions separately ) and making good disturbed surfaces of wall, floors etc Complete all as specified & as directed.
95
-
-
Taking down submainwiring/service cable including earth wire and making good disturbed surfaces to match with the existing surfaces of walls incuding removing of site complete all as specified and directed.
310
-
-
M&L for point wiring with FRLS PVC insulated, un-sheathed, multi stranded copper conductor cable of 1.5sqmm size, 1100 volts, drawn through & including concealed 20 mm rigid non metalic PVC conduit with all accessories fixed on wall/ceiling/truss including FRLS PVC insulated, unsheathed, multi stranded copper conductor cable of 1.5sqmm size as earth continuty conductor connected to common earth dolly including required numbers and size of sunk cast pressed steel terminal box made out of MS sheet 1.25 mm thick for mounting of fittings like switches, switch sockets, sockets, regulators etc with 3 mm thick hylum laminated sheet cover including cutting Chases pinning in, for concealed conduit wiring and making goods of disturbed surface not exc 15 cm girth complete all as specified and as directed for:-
NOTE: (a) Colour coding shall be followed as (i) Phase- Red (ii) Neutral - Black (iii) Earth - green (b) Electrical wiring above false ceiling shall be drawn through medium grade PVC conduit.
-
-
-
One light point / Fan point / Exhaust point / Bell point controlled by one 5A switch
50
-
-
One 5A flush type socke out let t point on same board board
20
-
-
One 5A flush type switch socket point on independent board
20
-
-
All as per Srl item No 149 here in before but One 3 pin socket outlet 15 Amp independent with cable of size 2.5 Sqmm for wiring and earth wire
20
-
-
M&L for point wiring with FRLS PVC insulated, un-sheathed, multi stranded copper conductor cable of 1.5 Sqmm size, 1100 volts, drawn through and including non metalic rigid PVC casing and caping not less than 25mm with all accessories fixed on wall / ceiling / truss including FRLS PVC insulated, unsheathed, multi stranded copper conductor cable of 1.5 Sqmm size as earth continuty conductor connected to common earth dolly including required numbers and size of MS boxes / non metallic rigid PVC Terminal boxes with cover plate in any size fixed on wall for fixing the switches, switch sockets, sockets, regulators etc complete all as specified for:- NOTE: (a) Colour coding shall be followed as (i) Phase- Red (ii) Neutral - Black (iii) Earth - green (b) Electrical wiring above false ceiling shall be drawn through medium grade PVC conduit.
-
-
-
One light point / Fan point / Exhaust point / Bell point controlled by one 5A switch
40
-
-
One 5A flush type socket out let point on same board board
20
-
-
One 5A flush type switch socket point on independent board
20
-
-
One light point controlled by two way switch.
2
-
-
All as per Srl item No 151 here in before but One 3 pin socket outlet 15 Amp independent with cable of size 2.5 Sqmm for wiring and earth wire
25
-
-
S&F switch piano flush type single pole one way 5 Amps Complete all as specified & as directed.
130
-
-
S&F in repairs Modular switch one way 6 Amp, one module,. Complete all as specified & as directed.
40
-
-
S & F in replacement of switch, piano flush type, single pole, one way, 5/6 Amps complete all as specified and directed.
20
-
-
Supply and fix switch sockets combination 5 pin 5 Amps flush type 240 Volts AC complete all as specified and directed.
40
-
-
S&F in repairs Modular Switch one way 16 Amp, one module Complete all as specified & as directed.
30
-
-
S & F in replacement of Bell push, 5/6 Amps, 240 volts SP complete all as specified and directed.
15
-
-
S&F in repairs Modular Bell push 6 Amp one module complete all as specified & as directed.
15
-
-
S&F in switch Socket combination 2 in 1, 3 pin 5 Amp flush type.Complete all as specified & as directed. make- Havells, Anchor.
20
-
-
S&F in repairs Modular Socket 6 Amp, 2 / 3 pin combined 2 module, Complete all as specified & as directed
20
-
-
S&F switch socket combination 2 in 1, 3 pin 6 Amp and 16 Amps Complete all as specified & as directed
40
-
-
S&F in repairs Modular socket 6A/16A, 2/3 pin combined 2 module. Complete all as specified & as directed.
35
-
-
S & F in replacement of Bell, DINGDONG type, 6 Amps, 240 volts, SP complete all as directed.
6
-
-
S&F Lamp holder ( batten/angle ) PVC/Polycarbonate type with back plate for batten/angle fittings.Complete all as specified & as directed.
20
-
-
S&F in repairs Lamp holder ( batten/angle ) PVC/Polycarbonate type with back plate for batten/angle fittings.Complete all as specified & as directed.
10
-
-
S & F Ceiling rose, PVC/polycarbonate insulated body type, 3 terminal, 240 volts, 5 Amps complete all as specified and directed.
10
-
-
S & F in replacement of Ceiling rose, PVC/polycarbonate insulated body type, 3 terminal, 240 volts, 5 Amps complete all as specified and directed.
15
-
-
Fixing only old serviceable light fittings any type received from item no-1 above including electric connection & cleaning complete.
10
-
-
Fixing only old serviceable LED Tube light fittings 18/20 Watt, 4' complete received from item Nos.-1 above including cleaning & connecting up with 3 core flexible copper conductor cable of suitable size.
10
-
-
S & F in repairs Lamp LED 15 Watt 230 Volt complete all as specified and directed.
10
-
-
S & F in repairs Lamp LED 10 Watt 230 Volt complete all as specified and directed.
10
-
-
S & F rechargeable Lamp LED 15 W 230 Volt complete all as specified and directed.
10
-
-
S & F in repair LED retrofit tubes18/ 20 Watt, 4' Complete all as specified & as directed
10
-
-
S&F in repairs LED Tube light fittings 20 Watt ( T-8 ), 4' builtin electronic driver with THD10% and lumen efficacy =115Lm/W complete with retrofit tube including connecting up with 3 core flexible copper conductor cable of suitable size Complete all as specified & as directed.
40
-
-
S&F in repairs LED Tube light fittings 10 Watt ( T-8 ), 2' builtin electronic driver with THD10% and lumen efficacy =115Lm/W complete with retrofit tube including connecting up with 3 core flexible copper conductor cable of suitable size Complete all as specified & as directed.
30
-
-
S& F in repairs Noble LED strip light 6 watt IP 20 with LED Driver+ power cord cut-table after 3 LED 50000 burning hours (Amber) SM for POP complete all as specified and directed
2
-
-
S&F in repairs LED bulk head luminaire hexafit 10 watt LED environmental friendly, ultra modern, energy saving, surface mounted, decorative hexagonal bulk head back lit LED luminaries comprising of high brrightness LED complete all as specified & as directed.
Make: C&S/Havells/Bajaj/Phillips/ Crompton as approved by GE.
10
-
-
S&F in repairs LED Ceiling light 9/10Watt THD10% round surface mounted die cast aluminium housing with frosted diffuser including LED lamp 12 Watt Complete all as specified & as directed. .Make: C&S/Havells/Bajaj/Phillips / Crompton as approved by GE.
40
-
-
S&F in repairs Recess mounting LED ultra slim Ceiling light 2'X2', 35/36 Watt THD10% complete all as specified and directed.
Make: C&S/Havells/Bajaj/Phillips / Crompton as approved by GE.
10
-
-
S &F in repairs surface mounting type LED ultra Ceiling light 1'X1', 18 Watt complete all as specified and directed.
Make: C&S/Havells/Bajaj/Phillips /Crompton as approved by GE.
10
-
-
S&F in repairs round shape 15 watt surface mounted LED down lighter with white powder coated alu housing with integrated electronic low THD10% 220 volts AC recessed type with high efficiency PMMA diffuser soft glare free light complete for roof ceiling including connecting up with three core flexible copper conductor cable of suitable size complete all as specified & as approved by GE.
30
-
-
S&F in repairs round shape 10 watt recessed mounted LED down lighter with white powder coated alu housing with integrated electrinic driver THD10% 220 volts AC recessed type with high efficiency PMMA diffuser soft glare free light complete for roof ceiling including connecting up with three core flexible copper conductor cable of suitable size complete all as specified & as approved by GE.
20
-
-
S&F in repairs LED Wall bracket type CITY-2 fitting 15 Watt complete.
Make: C&S/Havells/Bajaj/Phillips / Crompton or equivalent as approved by GE.
10
-
-
S&F in replacement new generation post top energy saving environment friendly, long aesthetically designed with symmetrical light distribution spun aluminium landscape luminaire with high power LEDs as light source of 20 Watt LED , clear cover light illumination for differnt applications suitable for pole dia 50 mm of complete all as specified and directed
3
-
-
S&F in repairs stepped, (socket/switch type) electronic fan regulator flush type Complete all as specified & as directed. 180 Watt, 240 Volts.
Make- Anchor/Bajaj or equivalent as approved by GE.
50
-
-
S&F in repairs stepped, (socket/switch type) modular fan regulator flush type Complete all as specified & as directed. 120 Watt, 240 Volts.
Make- Anchor/Bajaj or equivalent as approved by GE.
30
-
-
S&F in repairs stepped, (socket/switch type) electronic fan regulator flush type Complete all as specified & as directed. 180 Watt, 240 Volts.
Make- Anchor/Bajaj or equivalent as approved by GE.
100
-
-
Fixing only and connecting electric meter upto 25 Amp(Item received form ser No 146 here in before) complete all as specified and as directed.
1
-
-
M&L in repairs sub main wiring with 2 run of FRLS PVC insulated & unsheathed multistranded copper conductor of nominal cross sectional area 4.0 sqmm alongwith one run of FRLS PVC insulated & unsheathed multistranded copper conductor of nominal cross sectional area 4.0 sqmm as earth continuity conductor drawn in & including PVC conduit complete all as specified & directed.
100
-
-
M&L in repairs sub main wiring with 2 run of FRLS PVC insulated & unsheathed multistranded copper conductor of nominal cross sectional area 4.0 sqmm alongwith one run of FRLS PVC insulated & unsheathed multistranded copper conductor of nominal cross sectional area 4.0 sqmm as earth continuity conductor drawn in existing including PVC conduit complete all as specified & directed.
50
-
-
M&L in repairs for sub main wiring with 2 run of FRLS PVC insulated & unsheathed multistranded copper conductor of nominal cross sectional area 6.0 sqmm alongwith one run of FRLS PVC insulated & unsheathed multistranded copper conductor of nominal cross sectional area 6.0 sqmm as earth continuity conductor drawn through in existing PVC conduit complete all as specified and as directed.
50
-
-
M&L in repairs for sub main wiring with 2 run of FRLS PVC insulated & unsheathed multistranded copper conductor of nominal cross sectional area 6.0 sqmm alongwith one run of FRLS PVC insulated & unsheathed multistranded copper conductor of nominal cross sectional area 6.0 sqmm as earth continuity conductor drawn through in & including PVC conduit complete all as specified and as directed.
50
-
-
M&L in repairs for sub main wiring with 2 run of FRLS PVC insulated & unsheathed multistranded copper conductor of nominal cross sectional area 4.0 sqmm alongwith one run of FRLS PVC insulated & unsheathed multistranded copper conductor of nominal cross sectional area 4.0 sqmm as earth continuity conductor drawn through in & including PVC casing & capping complete all as specified and as directed.
60
-
-
S & F in repairs of PVC rectangular block for mounting switches, sockets, fan regulator etc. with 3mm thick plastic laminated sheet cover of size 250 X 200 X 50 mm deep complete. ISI marked.
20
-
-
S&F in repair of any size of sunk cast pressed steel terminal box made out of MS sheet 1.25 mm thick for mounting of fittings like switches, switch sockets, sockets, regulators etc suitable to accommodate to existing switching board
20
-
-
S & F in repairs of 2.8mm thick rectangular plastic laminated sheet cover of size 300 x 250 mm including cutting holes for mounting switches, sockets, fan regulators etc as pre requirement including fixing with sufficient no. of machine screws & washers complete all as specified
15
-
-
S&F in repairs single pole and neutral enclouser having IP -67 protection with a three pin & earth plug with socket complete and one SP, 20 A , 240 V MCB complete all as specified and directed
10
-
-
S&F in repairs single pole and neutral enclouser having IP -67 protection with a three pin & earth plug with socket complete and one SP, 32 A , 240 V MCB complete all as specified and directed
4
-
-
S&F in repairs sheet metal enclousers (DBS) when MCBs to be used 4 way, 240 Volts double door single pole & neutral with 200 Amps rated bus bar complete all as specified and as directed.
4
-
-
S&F in repairs sheet metal enclousers (DBS) when MCBs to be used 8 way, 240 Volt, double door single pole & neutral with 200 Amps rated bus bar complete all as specified and as directed.
4
-
-
S&F in repairs sheet metal enclousers (DBS) when MCBs to be used 12 way, 240 V, double door single pole & neutral with 200 Amps rated bus bar Complete all as specified & as directed.
2
-
-
S&F in repairs sheet metal enclousers (DBS) when MCBs to be used 4 way, 415V, double door tripple pole & neutral with 200 Amps rated bus bar Complete all as specified & as directed.
2
-
-
S&F sheet metal enclousers (DBS) when MCBs to be used VTPN 4 way double door with 200 Amps rated bus bar with MCCB incommer.
1
-
-
S&F in repairs MCB 415V, 10KA, TPN , 63Amps to 100Amp complete all as specified and directed.
6
-
-
S&F in repairs MCCB 415V, 16KA, 4 Pole , 63Amps to 100Amp complete all as specified and directed.
2
-
-
S&F in repairs MCB single phase and neutral 16A-63A, 230V 10KA. B' curve type complete all as specified and directed.
20
-
-
S&F in repairs MCB SP 6A-32A, 230V. 10KA. B' curve type complete all as specified and directed
40
-
-
Fixing only old serviceable MCB SP 6A-32A, 230V. 10KA Complete all as specified & as directed. ( MCB received from item No-3 here in before).
20
-
-
S & F in repairs Cable weather proof flat twin core with aluminium conductor multi stranded of size 6 sqmm, 1100Volts grade complete all as specified and directed.
50
-
-
M&L for earthling complete with Galvanised steel earth plate electrode 600 mm x 600 mm x 6 mm thick buried directrly in ground (earth pit not less than 2.25 mtr deep blow GL with top edge of earth plate not less than 1.5 Mtr below normal ground level, earth plate surrounded from all sides by 15 cm thick packed layer of vharcoal dust and common salt filled in alternate layers and electrode connections by using Galvanised earth strip 32 x 6 connected by means of bolts, nuts, check nuts and washer of galvanized iron or steel, provision of 40 mm dia GI pipe light grade for protection of GL earth strip and 20 mm dia GI pipe medium grade for watering arrangement and PCC (1:3:6) type B1 chamber, MS funnel, wire mesh, 50 mm thick RCC 1:2:4 type B1 earth pit cover with 6 Nos, 8 mm dia high strength deformed steel TMT bars on both ways including necessary excavation in any type of soil, returning, filling in, removal of surplus soil to distance n exc 50 Mtr, Provision of charcoal and slat complete all as shown in electrical plate No 3 of schedule SSR Part-I.
Note : (i) Cost of GI earth strip and GI protection pipe upto 7.5 mtr length shall be deemed to be included in the rate quoted for this item.
(ii) The unit rate shall also includes for Wire mesh, funnel, excavation, returning filling, removing, PCC chamber pit RCC cover, test point etc.
4
-
-
Taking down Ceilings/Walls/AirCirculator and refixing the same after repairs/painting in original position including fixing of nut, bolt & split pin and provision of new three core flexible PVC insulated multistranded copper conductor cable 1.0 sqmm from ceiling rose to fan complete all as specified and directed by Engr-in-charge.(Note- Repair work/ painting and cable for connection shall be measured and paid separately )
40
-
-
All as per item no. 212 (here in before) but Exhaust fans of any sweep complete as specified or directed
20
-
-
M&L for dismantiling the ceiling fan of any sweep/wall mounted fan/Air circulator fan , cleaning the surfaces throughly and applying a spray coat of synthetic existing enamel paint over one coat of red oxide primer including rewriting MES no. on fan complete all as specified and directed by Engr-in-Charge.
40
-
-
All as per Srl item No 214 here in before but Exhaust fans of any sweep.
30
-
-
M&L for dismentiling the Stator & Rotor of ceiling fan of any sweep,taking out the burnt copper wire, cleaning the Stator & Rotor with CTC, rewinding the fan with existing gauge and same nos of turns with super enameled copper including varnishing, baking, replacement of sleeves etc and reassembling the fan & testing, complete all as specified and directed.
50
-
-
All as per Srl item No 216 here in before but Exhaust fan of any sweep sweep complete all as specified & directed.
40
-
-
All as per Srl item No 216 here in before but air circular fan of any sweep complete all as specified & directed.
50
-
-
All as per Srl item No 216 here in before but Wall mounted fans complete all as specified & directed.
50
-
-
Dismantiling the ceiling fan of any sweep, examine complete part thoroughly , oiling, greasingall parts and complete overhauling of fan including replacement of spares such as bearings, bushes, split pin, nuts, bollts, clamps, screws and reassembling complete fan and making fully functional coplete all as specified and directed by Engr-in-Charge. [Note:- Spares like Bearings, Bushes, Capacitor & others shall be measured and paid separetely.]
30
-
-
All as per Srl item No 220 here in before but Exhaust fans of any sweep complete all as specified & directed.
20
-
-
All as per Srl item No 220 here in before but Wall mounted fans complete all as specified & directed.
20
-
-
Supply & Fix in repairs metal bush made out of Gun metal/Brass suitable for ceiling fans/ Exhaust fans of anysweep.
25
-
-
Supply& fix in repairs ball bearings suitable for ceiling fan of any sweep complete all as specified & directed.
30
-
-
Supply & fix in repairs ball bearings suitable for Exhaust fan of any sweep complete all as specified & directed.
30
-
-
Supply & fix in repairs capacitor 2.5 Mfd for ceiling fan , 415 , 50Hz. Make- Universal/Tibcon or equivalent as approved by GE.
50
-
-
Supply & fix in repairs capacitor wall mounted fan 2.0 Mfd, 415V, 50Hz Make- Universal/Tibcon or equivalent as approved by GE.
30
-
-
Supply & fix in repairs capacitor 3.15/4.0 Mfd for exhaust fan , 415 V,50Hz Make- Universal/Tibocon or equivalent as approved by GE.
80
-
-
Supply & Fix in repairs fan hook clamps steel suitable for ceiling fan hanging complete all as specified & directed
25
-
-
Supply & fix in repairs rubber reel for ceiling fan hanging complete all as specified & directed
30
-
-
Supply & Fix in repairs fan down rod made of 15 mm bore GI pipe, 60 cm long complete all as specified & directed.
20
-
-
Supply & Fix in repairs Canopy PVC suitable for fixing on fan down rod with screws etc complete all as specified & directed
30
-
-
Supply & Fix in repairs PVC Fan blades complete with nuts & washers and complete all as specified & directed.
14
-
-
Supply & Fix fan hook steel with suitable nut bolts for fixing arrangement on GI Pipe for ceiling fan hanging complete all as specified & directed
40
-
-
Supply & Fix nut, bolt,washer and split pins suitable for fixing of fan clamps with down rod& hanging of ceiling fan complete all as specified & directed
40
-
-
Supply & Fix in replacement of burnt rotor assembly complete for 1200mm sweep ceiling fan all as specified and directed.
40
-
-
Supply &Fix in replacement of burnt stator assembly complete for 1200mm sweep ceiling fan all as specified and directed.
40
-
-
Supply & fix in repairs metalic Exhaust fan blade with MS frame for 300mm sweep Exhaust fan complete all as specified and directed.
25
-
-
Supply & fix in replacement of burnt motor kit for PVC Exhaust fan 250mm sweep complete all as specified and directed.
30
-
-
S&F in repair exhaust fan made out of sturdy engineering plastic complete with all louvers shutter voltage 230 V , 50 Hz RPM 1200 , copper winding accessories including electric connection with three core flexible PVC insulated copper conductor multistranded cable 1.0 sqmm complete all as specified and directed.
8
-
-
S&F in repair ceiling fan complete with three blades , down roads, accessories 230 V , 1200 mm sweep with all accessories including electric connection with three core flexible PVC insulated copper conductor multistranded cable 1.0 sqmm complete all as specified and directed.
6
-
-
S&F in repairs PVC insulated sheathed flexible multistranded copper conductor cable 3 core 1.0 sqmm, 1100 Volts grade complete all as specified and directed.
80
-
-
S&F in repairs GI bracket made out from GI pipe 25/32mm dia, 1.20 m long fixed on wall with and including nut, bolts and GI clamps of size 25x4mm as required & including painting etc complete.
8
-
-
S&F in repairs new generation LED building security light fitting 25 Watt 230 Volts AC out door type energy saving and envrionmental friendly long life LED street light made out of with high pressure die cast aluminium housing with high efficiency LED asc lighting source and lens embeded PC cover having bottom opening seperate driver component with IP 66 protection and impact resistance of IK08 including electric conection complete all as specified & directed.
8
-
-
S&F in repair modular cover plate with frame complete all as specified and directed of following sizes :-.
-
-
-
1 module
4
-
-
2 module
4
-
-
3 module
5
-
-
4 module
5
-
-
6 module
5
-
-
8 module
5
-
-
S&F in repair modular metal box complete all as specified and directed of following sizes :-.
-
-
-
1 module
4
-
-
2 module
4
-
-
3 module
5
-
-
4 module
5
-
-
6 module
5
-
-
8 module
5
-
-
Evaluation Notes How It Works ?
Potential Partner
Select Your Requirements