Mathura Vrindavan Development Authority Tender
If you're a registered bidder for etender UP and want to inquire about any e-tender UP government has posted, this is your stop. No need to enter every detail on the website of <a href="https://etender.up.nic.in">etender.up.nic.in</a> - BidAssist filters will help you find the exact UP etender you're looking for. Read to learn how to search & bid for etender UP.
Mathura Vrindavan Development Authority - MVDA Tender
Civil And Construction
Road Construction
Building Construction
Eprocure
Opening Date5 Mar 2024
Closing Date14 Mar 2024
Tender Amount₹ 6,95,60,000
Costs
EMD
₹ 36,78,000Document Cost
₹ 5,900Tender Fee
Refer Documents
Description
Scription for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user
Contact
Tender Id
2024_UPMVD_911678_1Bid Award Id
ViewTender No
36/MVDA/2023-24Tender Authority
Mathura Vrindavan Development Authority ViewPurchaser Address
-Website
http://https://mvda.in/
GEM & Bid Advisory Services
Get portal registration, tender bidding, product/service listing or vendor/MSME certification services at a nominal cost
BOQ Items
Diluting and injecting chemical emulsion for post-constructionai anti-termite treatment (excluding the cost of chemical emulsion) : Treatment of soil under existing floors using chemical emulsion @ one litre per hole, 300 mm apart including drilling 12 mm diameter holes and plugging with cement mortar 1 :2 (1 cement : 2 Coarse sand) to match the existing floor: With chlorpyriphos/lindane E.c. 20% with 1% concentration DSR-2023, Item No. 2.35.3
1040
234000
225
Diluting and injecting chemical emulsion for post-constructionai anti-termite treatment (excluding the cost of chemical emulsion) : Treatment of soil under existing floors using chemical emulsion @ one litre per hole, 300 mm apart including drilling 12 mm diameter holes and plugging with cement mortar 1 :2 (1 cement : 2 Coarse sand) to match the existing floor: With chlorpyriphos/lindane E.c. 20% with 1% concentration DSR-2023, Item No. 2.34.1
260
44200
170
Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations etc. in layers not exceeding 20cm in depth, consolidating each deposited layer by ramming and watering, lead up to 50 and for all lift. DSR-2023, Item No.2.25
150
21300
142
Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level : 1:4:8 (1 cement : 4 coarse sand (zone-iii) derived from natural sources : 8 graded stone aggregate 40 mm nominal size derived from natural sources) DSR-2023, Item No. 4.1.8
340
1686400
4960
Providing and laying in position ready mixed or site batched design mix cement concrete for reinforced cement concrete work; using coarse aggregate and fine aggregate derived from natural sources, portland pozzolana / ordinary portland /portland Slag cement, admixtures in recommended proportions as per iS: 9103 to accelerate / retard setting of concrete, to improve durability and workability without impairing strength; including pumping of concrete to site of laying, curing, carriage for all leads; but excluding the cost of centering, shuttering, finishing and reinforcement as per direction of the engineer-in-charge; for the following grades of concrete. Note: Extra cement up to 10% of the minimum specified cement content in design mix shall be payable separately. in case the cement content in design mix is more than 110% of the specified minimum cement content, the contractor shall have discretion to either re-design the mix or bear the cost of extra cement. concrete of m25 grade with minimum cement content of 330 kg /cum DSR-2023, Item No. 5.33.1.1 All works upto plinth level Up to Plinth Lvl.
654
4525680
6920
All works above plinth level upto floor V level concrete of m25 grade with minimum cement content of 330 kg /cum DSR-2023, Item No.5.33.2.1
580
4163820
7179
Reinforced cement concrete work in beams, suspended floors, roofs having slope up to 15° landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases above plinth level up to floor five level, excluding the cost of centering, shuttering, finishing and reinforcement with 1:1.5:3 (1 cement : 1.5 coarse sand(zone-III) derived from
natural sources : 3 graded stone aggregate 20 mm nominal size derived from natural sources). DSR-2023, Item No.5.3
13
108901
8377
Centering and shuttering including strutting, propping etc. and removal of form for Foundations, footings, bases of columns, etc. for mass concrete DSR 2023, Item No. 5.9.1
867
247095
285
Centering and shuttering including strutting, propping etc. and removal of form for Columns, Pillars, Piers, Abutments, Posts and Struts DSR 2023, Item No. 5.9.6
1932
1350468
699
Centering and shuttering including strutting, propping etc. and removal of form for Walls (any thickness) including attached pilasters, butteresses, plinth and string courses etc. DSR 2023, Item No. 5.9.2
456
279528
613
Centering and shuttering including strutting, propping etc. and removal of form for Lintels, beams, plinth beams, girders, bressumers and cantilevers. with water proof ply 12 mm thick DSR 2023, Item No. 5.9.2
929
569477
613
Centering and shuttering including strutting, propping etc. and removal of form for Shelves (cast in situ) DSR 2023, Item No. 5.9.4
30
20250
675
Centering and shuttering including strutting, propping etc. and removal of form for Weather shed, chajjas, corbels etc., including edges DSR 2023, Item No. 5.9.19
122
84424
692
Centering and shuttering including strutting, propping etc. and removal of form for Suspended floors, roofs, landings, balconies and access platform. with water proof ply 12 mm thick DSR 2023, Item No. 5.9.20
2077
1553596
748
Centering and shuttering including strutting, propping etc. and removal of form forEdges of slabs and breaks in floors and walls Under 20 cm wide DSR 2023, Item No. 5.9.16.1
636
96036
151
Steel reinforcement for r.c.c. work including straightening, cutting, bending, placing in position and binding all complete upto plinth level. thermo-mechanically treated bars of grade fe-500D or more. DSR-2023, Item No. No.5.22.6
1659
13026468
7852
Steel work welded in built up sections/ framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required. In gratings, frames, guard bar, ladder, railings, brackets, gates and similar works DSR-2023, Item No. 10.25.2
10880
1360000
125
Providing and fixing stainless steel ( Grade 304) railing made of Hollow tubes, channels, plates etc., including welding, grinding, buffing, polishing and making curvature (wherever required) and fitting the same with necessary stainless steel nuts and bolts complete, i/c fixing the railing with necessary accessories & stainless steel dash fasteners , stainless steel bolts etc., of required size, on the top of the floor or the side of waist slab with suitable arrangement as per approval of Engineer-in-charge, (for payment purpose only weight of stainless steel members shall be considered excluding fixing accessories such as nuts, bolts, fasteners etc.). DSR-2023, Item No. 10.28
446
250652
562
Providing and fixing pressed steel door frames conforming to IS: 4351, manufactured from commercial mild steel sheet of 1.60 mm thickness, including hinges, jamb, lock jamb, bead and if required angle threshold of mild steel angle of section 50x25 mm, or base ties of 1.60 mm, pressed mild steel welded or rigidly fixed together by mechanical means, including M.S. pressed butt hinges 2.5 mm thick with mortar guards, lock strike-plate and shock absorbers as specified and applying a coat of approved steel primer after pre-treatment of the surface as directed by Engineer-in-charge: Profile B Fixing with carbon steel galvanised dash fastener of required dia and size (to be paid for separately) DSR-2023, Item No. 10.14.1.2
465
192975
415
Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in foundation and plinth in: Cement mortar I:4 (l cement : 4 coarse sand) DSR-2023, Item No. No. 6.1.1
127
681482
5366
Brick work with common burnt clay F.P.S. (non modular) bricks of class deaignation 150 in superstructure above plinth level up to floor V level in all shapes and sizes in :Cement mortar 1:6 (l cement : 6 coarse sand) DSR-2023, Item No.6.4.2
886
5874180
6630
Half brick masonry with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in superstructure above plinth level up to floor V level. Cement mortar 1:4 (1 cement :4 coarse sand) DSR-2023, Item No. 6.13.2
733
599594
818
12 mm cement plaster of mix : 1:4 (1 cement: 4 coarse sand) DSR-2023, Item No.13.4.1
5696
1480960
260
15 mm cement plaster on rough side of single or half brick wall of mix: 1:4 (1 cement: 4 coarse sand) DSR-2023, Item No. 13.5.1
4804
1436396
299
6 mm cement plaster of mix : 1:3 (1 cement : 3 fine sand) DSR-2023, Item No.13.16.1
2092
456056
218
Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete. DSR-2023, Item No.13.80
10735
1213055
113
Providing and applying of Heritage GRIT FINISH, a surface texture paint after applying corresponding roller coat brush finish as heritage primer on pre plasterd surface to be smooth level without any undulations,color scheme as per approved sample in approved shade.Grit is a two component system of natural marble chips 25 kg and 5 kg of Bonding agent (100% pure Acryalic emulsion). The composition of texture paint consits of grit, made of natural marble chips,no pigment added matt finish.flame retardant resistance to fungal and algal attacks The first coat (primer )should be applied by brush or wool roller as base coat, diluted with sufficient water and the next coat a final coat to be applied with trowel and properly finished. The thickness of both coat should be 1.00 mm to 1.50 mm.Application to be carried out by company's Authorised Dealer Approved Rate for MVDA
1780
861520
484
Stone work (machine cut edges) for wall lining etc. (veneer work) upto 10 metre height, backing filled with a grout of average 12 mm thick cement mortar 1:3 (1 cement : 3 coarse sand) including pointing in white cement mortar 1:2 (1 white cement : 2 stone dust) with an admixture of pigment matching the stone shade : (To be secured to the backing and the sides by means of cramps and pins which shall be paid for separately) : Red sand stone - exposed face fine dressed with rough backing. 30 mm thick DSR-2023, Item No.8.14.1.5
216
832896
3856
Design supply & installation of suspended Spider Glazing system designed to withstand the wind pressure as per IS 875 (Part-III). The Suspended System held with Spider Fittings of SS-316 Grade Steel of approved manufacturer with glass panel having 12 mm thick clear toughened glass held together with SS- 316 Grade Stainless steel Spider & bolt assembly with laminated
glass fins 21 mm thick. The Glass fins and glass panel assembly shall be connected to Slab/ beams by means of SS- 316 Grade stainless steel brackets & Anchor bolts and at the bottom using SS channel of 50x25x2mm using fastener & anchor bolts, non staining weather sealants of approved make, Teflon/ nylon bushes and separators to prevent bi-metallic contacts, all
complete to perform as per specification and approved drawings. The complete system to be designed to accommodate thermal expansion & seismic movements etc. The joints between glass panels (6 to 8 mm) and gaps at the perimeter & in U channel of the assembly to be filled with non staining weather sealant, so as to make the entire system fully water proof & dust proof. The rate shall include all design, Engineering and shop drawing including approval from structural designer, labour, T&P, scaffolding, other incidental charges including wastage, enabling temporary services all fitting fixers nut bolts, washer, Buffer plates, fastener, anchors, SS channel laminated glass etc. all complete. For the purpose of payment, actual elevation area of Glazing including thickness of joints and the portion of Glass panel inside the SS channel shall be measured.DSR-2023, Item No.25.8
164
1134552
6918
Providing and fixing stainless steel cramps of required size and shape for anchoring stone wall lining to the backing or securing adjacent stones in stone wall lining in cement mortar 1:2 (1 cement : 2 coarse sand), including making the necessary chases in stone and holes in walls wherever required. DSR-2023, Item No. 8.15
833
433160
520
Providing and fixing expansion hold fasteners on C.C. /R.C.C./Brick masonry surface backing including drilling necessary holes and the cost of bolt etc complete. Fastener with threaded dia 12 mm DSR 2021, Item No. 8.8.1.3
1404
61776
44
30 mm red sand stone sun-shade (chisel-dressed) supported on red sand stone brackets, fixed in walls with cement mortar 1:4 (1 cement : 4 coarse sand), including finishing complete. DSR 2021, Item No. 7.30
486
763992
1572
Providing and fixing stone jali 40 mm thick throughout in cement mortar 1:3 (1 cement : 3 coarse sand), including pointing in white cement mortar 1:2 (1 white cement : 2 stone dust) with an admixture of pigment, matching the stone shade, jali slab without any chamfers etc. Red sand stone DSR-2023, Item No. 7.33.1
28
304416
10872
Distempering with 1st quality acrylic distemper (ready mixed) having VOC content less than 50 gram/litre, of approved manufacturer and of required shade and colour all complete to achieve even shade and colour : New work (two or more coats) over and including water thinnable priming coat with cement primer having VOC content less than 50 gram/litre DSR-2023, Item No..13.41.1
8575
1157625
135
Painting with synthetic enamel paint of approved brand and manufacture to give an even shade : Two or more coats on new work DSR-2023, Item No.13.61.1
914
103282
113
Providing and laying vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS: 15622, of approved make, in all colours and shades, laid on 20mm thick cement mortar 1:4 (1 cement : 4 coarse sand), jointing with grey cement slurry @ 3.3 kg/ sqm including grouting the joints with white cement and matching pigments etc., complete. Size of Tile 600x600 mm DSR-2023, Item No.11.41.2
966
1092546
1131
40 mm thick rubbed stone flooring over 20 mm (average) thick base of cement mortar 1:5 (1 cement : 5 coarse sand) with joints 3 mm thick, side buttered with cement mortar 1:2 (1 cement : 2 stone dust) admixed with pigment to match theshade of stone and pointing with same mortar. . Red sand stone. DSR 2023, Item No. 11.30.1
266
318934
1199
Providing and laying Ceramic glazed floor tiles of size 300x300 mm (thickness to be specified by the manufacturer) of 1st quality conforming to IS : 15622 of approved make in colours such as White, Ivory, Grey, Fume Red Brown, laid on 20 mm thick cement mortar 1:4 (1 Cement : 4 Coarse sand), Jointing with grey cement slurry @ 3.3 kg/sqm including pointing the joints with white cement and matching pigment etc., complete. DSR-2023, Item No 11.37
84
67032
798
Providing and laying Vitrified tiles in floor in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS:15622, of approved brand & manufacturer, in all colours and shade, laid on 20 mm thick cement mortar 1:4 (1 cement: 4 coarse sand) jointing with grey cement slurry @3.3 kg/sqm includingngrouting the joints with white cement and matching pigments etc. The tiles must be cut with the zero chipping diamond cutter only . Laying of tiles will be done with the notch trowel, plier, wedge, clips of required thickness, leveling system and rubber mallet for placing the tiles gently and easily. Glazed Vitrified tiles Matt/Antiskid finish of size Size of Tile 600 x 600 mm DSR-2023, Item No.11.41A.3.1
457
487162
1066
Providing and fixing Ist quality ceramic glazed wall tiles conforming to IS: 15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundybottle green, black of any size as approved by Engineer-in-Charge, in skirting, risers of steps and dados, over 12 mm thick bed of cement mortar 1:3 (1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm, including pointing in white cement mixed with pigment of matching shade complete. DSR-2023, Item No .8.31
666
614718
923
Providing and laying Polished Granite stone flooring in required design and patterns, in linear as well as curvilinear portions of the building all complete as per the architectural drawings with 18 mm thick stone slab over 20 mm (average) thick base of cement mortar 1:4 (1 cement : 4 coarse sand) laid and jointed with cement slurry and pointing with white cement slurry admixed with pigment of matching shade including rubbing, curing and polishing etc. all complete as specified and as directed by the Engineer-in-Charge. Polished Granite stone slab of colour Black, Cherry/Ruby Red or equivalent DSR-2023, Item No 11.56.1
305
994910
3262
Stone tile work for wall lining upto 10 m height with special adhesive over 12 mm thick bed of cement mortar 1:3 (1 cement : 3 coarse sand), including pointing in white cement with and admixture of pigment to match the stone shade. 8mm thick (mirror polished and machine cut edge) Granite stone of any colour and shade DSR-2023, Item No 7.38.1.1
176
396528
2253
Providing and fixing 18 mm thick gang saw cut, mirror polished, premoulded and prepolished, machine cut for kitchen platforms, vanity counters, window sills, facias and similar locations of required size, approved shade, colour and texture laid over 20 mm thick base cement mortar 1:4 (1 cement : 4 coarse sand), joints treated with white cement, mixed with matching pigment, epoxy touch ups, including rubbing, curing, moulding and polishing of edges to give high gloss finish etc. complete at all levels. Granite stone slab of colour black, Cherry/Ruby red Area of slab upto 0.50 sqm DSR-2023, Item No 8.2.2.1
305
1202005
3941
Providing edge moulding to 18 mm thick marble stone counters, Vanities etc., including machine polishing to edge to give high gloss finish etc. complete as per design approved by Engineer-in-Charge. (Granite work) DSR 2023, Item No. 8.3.2
120
44640
372
Extra for providing opening of required size & shape for wash basin/ kitchen sink in kitchen platform, vanity counter and similar location in marble/ Granite/ stone work, including necessary holes for pillar taps etc. including moulding, rubbing and polishing of cut edges etc. complete. DSR 2023, Item No. 8.5
59
42008
712
Kota stone slab flooring over 20 mm (average) thick base laid over and jointed with grey cement slurry mixed with pigment to match the shade of the slab, including rubbing and polishing complete with base of cement mortar 1 : 4 (1 cement : 4 coarse sand) : 25 mm thick DSR-2023, Item No.11.26.1
84
119112
1418
Kota stone slabs 20 mm thick in risers of steps, skirting, dado and pillars laid on 12 mm (average) thick cement mortar 1:3 (1 cement: 3 coarse sand) and jointed with grey cement slurry mixed with pigment to match the shade of the slabs, including rubbing and polishing complete. DSR-2023, Item No.11.27
22
37708
1714
Marble stone flooring with 18 mm thick marble stone, as per sample of marble approved by Engineer-in-charge, over 20 mm (average) thick base of cement mortar 1:4 (1 cement : 4 coarse sand) laid and jointed with grey cement slurry, including rubbing and polishing complete with : Makrana white second quality DSR-2023, Item No.11.23.1
130
353730
2721
Providing and fixing ISI marked flush door shutters conforming to IS : 2202 (Part I) decorativetype, core of block board construction with frame of 1st class hard wood and well matched teak 3 ply veneering with vertical grains or cross bands and face veneers on both faces of shutters. 35 mm thick including ISI marked Stainless Steel butt hinges with necessary screws DSR-2023, Item No. 9.20.1
145
366705
2529
Providing & Fixing decorative high pressure laminated sheet of plain / wood grain in gloss / matt/ suede finish with high density protective surface layer and reverse side of adhesive bonding quality conforming to IS : 2046 Type S, including cost of adhesive of approved quality. 1.0 mm thick DSR-2023, Item No. 9.127.2
290
189370
653
Providing and fixing factory made P.V.C. door frame of size 50x47 mm with a wall thickness of 5 mm, made out of extruded 5mm rigid PVC foam sheet, mitred at corners and joined with 2 Nos of 150 mm long brackets of 15x15 mm M.S. square tube, the vertical door frame profiles to be reinforced with 19x19 mm M.S. square tube of 19 gauge, EPDM rubber gasket weather seal to be provided through out the frame. The door frame to be fixed to the wall using M.S. screws of 65/100 mm size, complete as per manufacturer’s specification and direction of Engineer- in-Charge. DSR-2023, Item No. 9.119
20
7160
358
Providing and fixing factory made panel PVC door shutter consisting of frame made out of M.S. tubes of 19 gauge thickness and size of 19 mm x 19 mm for styles and 15x15 mm for top & bottom rails. M.S. frame shall have a coat of steel primers of approved make and manufacture. M.S. frame covered with 5 mm thick heat moulded PVC 'C' channel of size 30 mm thickness, 70 mm width out of which 50 mm shall be flat and 20 mm shall be tapered in 45 degree angle on both side forming styles and 5 mm thick, 95 mm wide PVC sheet out of which 75mm shall be flat and 20 mm shall be tapered in 45 degree on the inner side to form top and bottom rail and 115 mm wide PVC sheet out of which 75 mm shall be flat and 20 mm shall be tapered on both sides to form lock rail. Top, bottom and lock rails shall be provided both side of the panel. 10 mm (5 mm x 2 ) thick, 20 mm wide cross PVC sheet be provided as gap insert for top rail & bottom rail, paneling of 5 mm thick both side PVC sheet to be fitted in the M.S. frame welded/ sealed to the styles & rails with 7 mm (5 mm+2 mm) thick x 15 mm wide PVC sheet beading on inner side, and joined together with solvent cement adhesive. An additional 5 mm thick PVC strip of 20 mm width is to be stuck on the interior side of the 'C' Channel using PVC solvent adhesive etc. complete as per direction of Engineer-in-charge, manufacturer's specification & drawing. 30 mm thick plain PVC door shutters DSR-2023, Item No. 9.120
8
18536
2317
Providing and fixing bright finished brass 100 mm mortice latch and lock with 6 levers and a pair of lever handles of approved quality with necessary screws etc. complete.
DSR-2023, Item No. 9.76
87
54114
622
Providing and fixing aluminium handles, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade, with necessary screws etc. complete : 125 mm DSR-2023, Item No. 9.100.1
155
7440
48
Providing and fixing aluminium hanging floor door stopper, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour and shade, with necessary screws etc. complete. Twin rubber stopper DSR-2023, Item No. 9.101.2
91
4732
52
Providing and fixing aluminium tower bolts, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868 ) transparent or dyed to required colour or shade, with necessary screws etc. complete :250x10 mm DSR-2023, Item No. 9.97.2
91
7553
83
Providing and fixing factory made uPVC glazed/wire mesh windows/doors comprising of lead free uPVC multi-chambered frame, sash and mullion/coupler (where ever required) extruded profiles having DSR-2023, Item No 9.147A minimum wall thickness of 1.70 mm for Series R1 and R2 profiles and 2.10 mm for Series R3 and R4 profiles conforming to EN: 12608 in any shape, colour and design duly reinforced with galvanized mild steel section made of required shape & size as per CPWD Specification, uPVC extruded glazing beads, interlocks and Inline sash adaptor (where ever required) of appropriate dimension, EPDM gasket, hardware, SS 304 grade fasteners of minimum 8 mm dia with countersunk head, comprising of matching polyamide PA6 grade sleeve for fixing frame to finished wall as per IS 1367 : Part 1 to 14, plastic packers, plastic caps and necessary stainless steel screws etc. Profile of frame, sash & mullion (if required) shall be mitred cut and fusion welded/mechanically jointed duly sealed at all corners, including drilling of holes for fixing hardware and drainage of water etc. After fixing frame the gap between frame and adjacent finished wall shall be filled with weather proof silicon sealant over backer rod of approved size and quality, all complete as per approved drawing conforming to CPWD specification & direction of Engineer-in-Charge. Section of steel reinforcement and cross sections of uPVC profiles to be as per design approved by Engineer-in-Charge. Wire mesh / Glazing of plain/ toughened/ laminated/ double glass unit with / without high performance coatings as per design requirements and conforming to IS: 3548 & IS: 16231 shall be paid separately. Note:- Structural design proof checked from a Government Engineering Institute, to be provided by the manufacturer for : (i) Sites with basic wind speed 45 m/sec as per IS 875 – Part 3 (ii) Sites with structure height more than 20m for all wind speeds Two track two panels sliding window with Aluminium channel for roller track, wool pile, nylon rollers with SS 304 body. Using R3 series with frame (55mm & above) x (40mm & above) & sash (30mm & above) x (55mm & above) with zinc alloy (zamak) powder coated handle on every panel along with multi-point locking system (Height upto 1.8m). 9.147.A1.2
62
397234
6407
Three track three panels sliding window with two glazed & one wire mesh panels with Aluminium channel for roller track, wool pile, nylon rollers with SS 304 body. Using R3 series with frame (98mm & above) x (40mm & above) & both glazed and fly screen sash (30mm & above) x (55mm & above) with zinc alloy (zamak) powder coated handle on every glazed panel along with multi-point locking system. (Height upto 1.8m) 9.147.A4.2
85
672945
7917
Casement door double panel with French (False) Mullion with zinc alloy (zamak) 3D hinges, multi-point locking system with cylinder, zinc alloy (zamak) powder coated handles on both sides. Using R3 series with frame (55 mm & above) x (50mm & above) & sash (55 mm & above) x (85mm & above) & French (False) mullion (55 mm & above) x (60mm & above). (Height upto 2.5 metre). 9.147.F2.1
49
424683
8667
Fixed window / ventilator without mullion / transom. Using R1 series with frame (33mm & above ) x (35mm & above). (Height upto 0.90 metre) DSR 2023, Item No. 9.147.C1
15
90075
6005
Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with EPDM rubber / neoprene gasket etc. complete as per the architectural drawings and the directions of engineer-in-charge . (Cost of aluminium snap beading shall be paid in basic item): (Cost of aluminium snap beading shall be paid in basic item): DSR 2023, Item No. 21.3 With float glass panes of 5 mm thickness (weight not less than 12.50 kg/sqm)
140
153440
1096
With float glass panes of 8 mm thickness (weight not less than 20 kg/sqm) 21.3.3
49
60123
1227
Fly proof stainless steel grade 304 wire gauge with 0.5 mm dia. wire and 1.4mm wide aperture withmatching wood beading DSR 2023, Item No.9.7.8
19
24890
1310
Providing and fixing 12 mm thick frameless toughened glass door shutter of approved brand and manufacture, including providing and fixing top & bottom pivot & double acting hydraulic floor spring type fixing arrangement and making necessary holes etc. for fixing required door fittings, all complete as per direction of Engineer-in-charge (Door handle, lock and stopper etc.to be paid separately). DSR 2023, Item No.21.18
16
62032
3877
Providing and laying integral cement base water proofing treatment including preparation of surface as required for treatment of roofs, balconies, terraces etc. consisting of following operations: (a) Applying a slurry coat of neat cement using 2.75 kg/sqm ofcement admixed with water proofing compound conforming to IS 2645 and approved by Engineer-in-charge over the RCC slab adjoining wall upto 300 mm height including cleaning the surface before treatment. (b) Laying brick bats with mortar using broken brick bats 25mm to 115 mm size with 50% of cement mortar 1:5 (1 cement : 5 coarse sand) admixed with water proofing compound conforming to IS: 2645 and approved by Engineer-in-charge to required slope and treating similarly the adjoining heights upto 300mm height including rounding of junctions of walls and slabs. (c) After two days of propoer curing applying a second of cement slurry using 2.75 kg/sqm of cement admixed with water proofing compound conforming to IS 2645 and approved by Engineer-in-charge. (d) Finishing the surface with 20mm thick jointless cement mortar of mix 1:4 (1 cement : 4 coarse sand) admixed water proofing compound conforming to IS 2645 and approved by Engineer in charge including laying glass fibre cloth of approved quality in top layer of plaster and finally finishing the surface with trowel with neat cement slurry and making pattern of 300 x 300 mm square 3 mm deep. (e) The whole terrace so finished shall be flooded with water for a minimum period of two weeks for curing and for final test . All above operations to be done in order and as directed and specified by the Engineer-in-charge with average thickness of 120 mm and minimum thickness at khurra as 86mm
1106
1355956
1226
Providing and laying water proofing treatment to vertical and horizontal surfaces of depressed portions of W.C., kitchen and the like consisting of: (i) Ist course of applying cement slurry @ 4.4 kg/sqm mixed with water proofing compound conforming to IS 2645 in recommended proportions including rounding off junction of vertical and horizontal surface. (ii) IInd course of 20 mm cement plaster 1:3 (1 cement : 3 coarse sand) mixed with water proofing compound in recommended proportion including rounding off junction of vertical and horizontal surface. (iii) IIIrd course of applying blown or residual bitumen applied hot at 1.7 kg. per sqm of area. (iv) IVth course of 400 micron thick PVC sheet. (Overlaps at joints of PVC sheet should be 100
mm wide and pasted to each other with bitumen @ 1.7 kg/sqm). DSR 2023, Item No. 22.3
437
244720
560
Providing and applying integral crystalline slurry of hydrophilic in nature for waterproofing treatment to the RCC structures like retaining walls of the basement, water tanks, roof slabs, podiums, reservior, sewage & water treatment plant, tunnels / subway and bridge deck etc., prepared by mixing in the ratio of 5 : 2 (5 parts integral crystalline slurry : 2 parts water) for vertical surfaces and 3 : 1 (3 parts integral crystalline slurry : 1 part water) for horizontal surfaces and applying the same from negative (internal) side with the help of synthetic fiber brush. The material shall meet the requirements as specified in ACI-212-3R-2010 i.e by reducing permeability of concrete by more than 90% compared with control concrete as per DIN 1048 and resistant to 16 bar hydrostatic pressure on negative side. The crystalline slurry shall be capable of self-healing of cracks up to a width of 0.50mm. The work shall be carried out all complete as per specification and the direction of the engineer-in-charge. The product performance shall carry guarantee for 10 years against any leakage. DSR 2023, Item No. 22.23. For vertical surface two coats @ 0.70 kg per sqm per coat 22.23.1
138
47472
344
For horizontal surface one coat @1.10 kg per sqm. 22.23.2
485
128040
264
Providing gola 75x75 mm in cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 stone aggregate 10 mm and down gauge), including finishing with cement mortar 1:3 (1 cement : 3 fine sand) as per standard design : In 75x75 mm deep chase DSR-2023, Item No 12.21.1
383
85026
222
Making khurras 45x45 cm with average minimum thickness of 5 cm cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate of 20 mm nominal size) over P.V.C. sheet 1 m x 1 m x 400 micron, finished with 12 mm cement plaster 1:3 (1 cement : 3 coarse sand) and a coat of neat cement, rounding the edges, making and finishing the outlet complete. DSR-2023, Item No 12.22
17
3689
217
Providing and fixing on wall face unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion, (i) Single socketed pipes. 110 mm diameter DSR-2023, Item No 12.41.2
216
59184
274
Supply and fixing of Door lock MVDA Saction Rate (UPBTVP BUILDING)
18
10620
590
Supply and fixing of Aluminium Door handle 125mm MVDA Saction Rate (UPBTVP BUILDING)
40
2200
55
Providing and fixing looking mirror superior glass Tappered edge ( approved quality) 6 mm thick fixed on SS Spacers on Back Side complete in all respect as per direction of Engineer in- charge. MVDA Saction Rate (UPBTVP BUILDING) looking Mirror Size( 0.60 M x 0.75M) MVDA Saction Rate (UPBTVP BUILDING)
24
36000
1500
Supply and fixing of looking Mirror Size( 0.45 M x 0.60M) MVDA Saction Rate (UPBTVP BUILDING)
8
9600
1200
S/F 4mm thick Acrylic Transpairent sheet Incuding supply of necessary fifting complete in all respect as per direction of engineer incharge. MVDA Saction Rate (UPBTVP BUILDING)
40
146400
3660
S/F of SS Dispencer (Jaquar/ Plumber make) model no. CHR-35735 Complete in all respect as per direction of engineer incharge. MVDA Saction Rate (UPBTVP BUILDING)
20
34560
1728
S/F of Toilet Paper holder Jaquar/ Plumber model no. CHR-35753 Complete in all respect as per direction of engineer incharge.MVDA Saction Rate (UPBTVP BUILDING)
20
33660
1683
S/F Jet Spray G-lite make Complete in all respect as per direction of engineer incharge. MVDA Saction Rate (UPBTVP BUILDING)
24
8160
340
S/F Urinal Partition Somany make Complete in all respect as per direction of engineer incharge. MVDA Saction Rate (UPBTVP BUILDING)
24
182640
7610
S/F Towel Rod Jaquar make (600 mm)model no. CHR-1507 Complete in all respect as per direction of engineer incharge. MVDA Saction Rate (UPBTVP BUILDING)
16
27840
1740
S/F Towel Rod (450 mm) Plumber make model no. CHR-1111BNM Complete in all respect as per direction of engineer incharge. MVDA Saction Rate (UPBTVP BUILDING)
16
26944
1684
Provinding and fixing of Gun metal gate vale 25mm dia (DSR 18.17.1 -2018)MVDA Saction Rate (UPBTVP BUILDING)
20
8260
413
Supply and fixing of Extra for Difference between Granite cladding and flooring Rate(4407.80 - 3700) = 707.80 Say 707/-MVDA Saction Rate (UPBTVP BUILDING)
240
169680
707
S/F long body Kitchen bib cock Jaquar (600 mm)model no. CHR-347 Complete in all respect as per direction of engineer incharge. MVDA Saction Rate (UPBTVP BUILDING)
8
12792
1599
S/F of Fitting (Jaquar/ Plumber make) Complete in all respect as per direction of engineer incharge. Bottale trap
24
39720
1655
Supply and fixing of Hand Sawar model no. CHR-573 MVDA Saction Rate (UPBTVP BUILDING)
16
23456
1466
Supply and fixing of Basin mixture model no. CHR-15011 MVDA Saction Rate (UPBTVP BUILDING)
16
68224
4264
Supply and fixing of Pillar Cock model no.CHR-15001 MVDA Saction Rate (UPBTVP BUILDING)
16
30800
1925
Supply and fixing of Stop cock model no.CHR-35053 MVDA Saction Rate (UPBTVP BUILDING)
16
22720
1420
Supply and fixing of Bib cock model no. CHR-35037 MVDA Saction Rate (UPBTVP BUILDING)
16
31680
1980
Provind and laying Commissioning of 1H.P. submersable pump ISI Mark with Starter Complete in all respect as per direction of Engineer incharge. MVDA Saction Rate (UPBTVP BUILDING)
4
56000
14000
Providing and fixing of Teak wood doors shutter 85mm thick ornamental pannelled shutter with Carbing including Teak wood frame/ Chaukats size 75mm thick 245 mm width fixed in position with deshfasners of required dia and length and s/s hings of suitable size including 7 coat of melamin polish of both side complete in all respect as per direction of Engineer-in-charge including supplying all material labour T&P etc. required for proper completion . MVDA Saction Rate (UPBTVP BUILDING)
8
336000
42000
Providing and fixing brass Door fifting with lacured polish including labour T&P Complete in all Respect. MVDA Saction Rate (UPBTVP BUILDING) (a) Door bell
8
3176
397
As Above Item but big round- 4" MVDA Saction Rate (UPBTVP BUILDING)
16
12800
800
As Above Item but Supply and fixing of Small round 2" MVDA Saction Rate (UPBTVP BUILDING)
24
7488
312
As Above Item but Supply and fixing of Handle 900 mm MVDA Saction Rate (UPBTVP BUILDING)
8
61440
7680
As Above Item but Supply and fixing of Handle 600 mm MVDA Saction Rate (UPBTVP BUILDING)
8
52432
6554
As Above Item but Supply and fixing of Sliding rod 610 mm MVDA Saction Rate (UPBTVP BUILDING)
4
27640
6910
As Above Item but Supply and fixing of Aldrop 24 " MVDA Saction Rate (UPBTVP BUILDING)
4
4512
1128
As Above Item but Supply and fixing of Aldrop 18 " MVDA Saction Rate (UPBTVP BUILDING)
4
3460
865
As Above Item but Supply and fixing of Door Stoper MVDA Saction Rate (UPBTVP BUILDING)
16
6624
414
As Above Item but Supply and fixing of Ms Door Stoper MVDA Saction Rate (UPBTVP BUILDING)
8
4560
570
As Above Item but Supply and fixing of Ms Door lock MVDA Saction Rate (UPBTVP BUILDING)
8
18720
2340
Providing and fixing white vitreous china pedestal type water closet (European type W.C. pan) with seat and lid, 10 litre low level white P.V.C. flushing cistern, including flush pipe, with manually controlled device (handle lever), conforming to IS : 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required : W.C. pan with ISI marked white solid plastic seat and lid DSR-2023, Item No 17.2.1
19
90136
4744
Providing and fixing water closet squatting pan (Indian type W.C. pan ) with 100 mm sand cast Iron P or S trap, 10 litre low level white P.V.C. flushing cistern, including flush pipe, with manually controlled device (handle lever) conforming to IS : 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required: White Vitreous china Orissa pattern W.C. pan of size 580x440 mm with integral type foot rests DSR-2023, Item No 17.1.1
4
19708
4927
Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass pillar taps, 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever require: White Vitreous China Wash basin size 630x450 mm with a single 15 mm C.P.brass pillar tap DSR-2023, Item No 17.7.2
24
38904
1621
Providing and fixing P.V.C. waste pipe for sink or wash basin including P.V.C. waste fittings complete. Flexible pipe 40 mm dia DSR-2023, Item No 17.28.2.2
32
2784
87
Providing and fixing 100 mm sand cast Iron grating for gully trap.DSR-2023, Item No 17.29
54
2052
38
Providing and fixing PVC pipe conforming to IS make working pressure 6kg/sqcm including testing labour T&P and all complete fittings SOR -2023-24, Ch.23/30 140mm dia
280
154000
550
100mm dia
220
99000
450
Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings This includes jointing of pipes & fittings with one step CPVC solvent cement, trenching, refilling & testing of joints complete as per direction of Engineer in Charge. External work DSR-2023, Item No 18.9 a) 100 mm nominal dia Pipes
50
119100
2382
b) 150 mm nominal dia Pipes 18.9.10
40
198680
4967
Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings and fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer in Charge. Concealed work, including cutting chases and making good the walls etc. DSR-2023, Item No 18.8 20 mm dia (iner fitting)
330
129030
391
Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer in Charge. Internal work - Exposed on wall DSR-2023, Item No 18.7 32mm dia (outer fitting)18.7.4
220
82940
377
Providing and fixing gun metal gate valve with C.I. wheel of approved quality {screwed end):. 32mm dia DSR-2023, Item No 18.17.2 32mm dia
27
13554
502
Providing and fixing brass bib cock of approved quality : 15 mm nominal bore DSR-2023, Item No 18.15.1
39
10023
257
Providing and fixing C.P. brass long nose bib cock of approved quality conforming to IS standards and weighing not less than 810 gms. 15 mm nominal bore DSR-2023, Item No 18.50.1
39
23283
597
Providing and fixing brass stop cock of approved quality : 15 mm nominal bore DSR-2023, Item No 18.16.1
34
8738
257
Providing and fixing C.P. brass shower rose with 15 or 20 mm inlet : 100 mm diameter DSR-2023, Item No 18.22.1
21
2961
141
Constructing masonry Chamber 60x60x75 cm inside, in brick work in cement mortar 1:4 (1 cement : 4 coarse sand) for sluice valve, with C.I. surface box 100mm top diameter, 160 mm bottom diameter and 180 mm deep ( inside) with chained lid and RCC top slab 1:2:4 mix (1 cement : 2 coarse sand : 4 graded stone aggregate 20mm nominal size ) , i/c necessary excavation, foundation concrete 1:5:10 (1 cement : 5 fine sand : 10 graded stone aggregate 40 mm nominal size) and inside plastering with cement mortar 1:3 (1 cement : 3 coarse sand) 12 mm thick, finished with a floating coat of neat cement complete as per standard design : With common burnt clay F.P.S.(non modular) bricks of class designation 7.5 DSR-2023, Item No 18.33.1
29
229361
7909
Providing and fixing square-mouth S.W. gully trap class SP-1 complete with C.I. grating brick masonry chamber with water tight C.I. cover with frame of 300 x300 mm size (inside) the weight of cover to be not less than 4.50 kg and frame to be not less than 2.70 kg as per standard design: 100x100 mm size P type With common burnt clay F.P.S. (non modular) bricks of class designation 7.5 DSR-2023, Item No 19.4.1.1
28
55188
1971
Providing and placing on terrace (at all floor levels) polyethylene waterstorage tank, IS : 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank. DSR-2023, Item No 18.48
8000
64000
8
Providing and fixing 600x450 mm beveled edge mirror of superior glass (ofapproved quality) complete with 6 mm thick hard board ground fixed to wooden cleats with C.P. brass screws and washers complete. DSR-2023, Item No 17.31
24
28080
1170
Providing and fixing brass ferrule with C.I. mouth cover including boring and tapping the main : 15 mm nominal bore DSR-2023, Item No 18.20.1
14
3346
239
Providing and fixing Stainless Steel A ISI 304 (18/8) kitchen sink as per IS:13983 with C.I. brackets and stainless steel plug 40 mm, including painting of fittings and brackets, cutting and making good the walls wherever required : 610x460 mm bowl depth 200 mm DSR-2023, Item No 17.10.2.2
5
14100
2820
Providing and fixing C.P. brass angle valve for Basin mixer and geyser points of approved quality conforming to IS:8931 15mm nominal bore DSR-2023, Item No 18.53.1
21
8778
418
Providing and fixing white vitreous china flat back half stall urinal of size 580x380x350 mm with white PVC automatic flushing cistern, with fittings, standard size C.P. brass flush pipe, spreaders with unions and clamps (all in C.P. brass) with waste fitting as per IS : 2556, C.I. trap with outlet grating and other couplings in C.P. brass, including painting of fittings and cutting and making good the walls and floors wherever required : DSR-2023, Item No 17.5 Single half stall urinal with 5 litre P.V.C. automatic flushing cistern 17.5.1
9
79101
8789
Providing and fixing PTMT soap Dish Holder having length of 138mm, breadth 102mm, height of 75mm with concealed fitting arrangements, weighing not less than 106 gms. DSR-2023, Item No 18.65
24
1944
81
Add for plaster drip course/ groove in plastered surface or moulding to r.c.c. projections. DSR-2023, Item No.5.30
351
20007
57
Finishing walls with Acrylic Smooth exterior paint of required shade : New work (Two or more coat applied @ 1.67 ltr/10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/10 sqm) DSR-2023, Item No. 13.46.1
1112
128992
116
Excavating, supplying, stacking and filling of local earth (including royalty) by mechanical transport upto a lead of 5km also including ramming and watering of the earth in layers not exceeding 20 cm in foundation trenches, plinth, sides of foundation etc. complete for all lift. DSR-2023, Item No. 2.25(a)
158
80580
510
Filling with available fly ash and earth (excluding rock) in trenches or embankment in layers (each layer should not exceed 15 cm), with intermediate layer of compacted earth (Soil density of 98%) after every four layers of compacted depth of fly ash, sides & top layer of filling shall be done with earth having total minimum compacted thickness 30 cm or as decided by Engineer -in-charge, including compacting each layer by rolling/ ramming and watering, all complete as per drawing and direction of Engineer -in - charge. DSR-2023, Item No. 2.38
380
85120
224
Construction of granular sub-base by providing close graded Material conforming to specifications, mixing in a mechanical mix plant at OMC, carriage of mixed material by tippers to work site, for all leads & lifts, spreading in uniform layers of specified thickness with motor grader on prepared surface and compacting with vibratory power roller to achieve the desired density, complete as per specifications and directions of Engineer-in-Charge. With material conforming to Grade-I (size range 75 mm to 0.075 mm) having CBR Value-30 DSR-2023, Item No. 16.78.1
195
395265
2027
Providing and laying design mix cement concrete of M-30 grade, in roads/ taxi tracks/ runways, using cement content as per design mix, using coarse sand and graded stone aggregate of 40 mm nominal size in appropriate proportions as per approved & specified design criteria, providing dowel bars with sleeve/ tie bars wherever required, laying at site, spreading and compacting mechanically by using needle and surface vibrators, levelling to required slope/ camber, finishing with required texture, including steel form work with sturdy M.S. channel sections, curing, making provision for contraction/ expansion, construction & longitudinal joints (10 mm wide x 50 mm deep) by groove cutting machine, providing and filling joints with approved joint filler and sealants, complete all as per direction of Engineer-in-charge (Item of joint fillers, sealants, dowel bars with sleeve/ tie bars to be paid separately). Note:- Cement content considered in M-30 is @ 340 kg/cum. Excess/ less cement used as per design mix is payable/ recoverable separately. Cement concrete prepared with batch mixing machine DSR-2023, Item No.16.43.1
85
651610
7666
Extra for providing and mixing hardening compound of approved quality as per manufacturer's specification in cement concrete. DSR-2023, Item No.16.44
255
10200
40
Providing and fixing pre-moulded joint filler in expansion joints of RCC roads / CC pavements after making the joints dust free with high pressure air jet cleaners, all complete as per direction of the Engineer-in-Charge. (Pre-moulded joint fillers shall be made of bitumen hot sealing compound impregnated fibre board having impregnation more than 35%, conforming to IS:1838 for fibre board and IS: 1834 for hot sealing bitumen compound grade A.) DSR-2023, Item 16.45
21300
63900
3
Providing and laying at or near ground level factory made kerb stone of M-25 grade cement concrete in position to the required line, level and curvature, j ointed with cement mortar 1:3 (1 cement: 3 coarse sand), including making j oints with or without grooves (thickness of j oints except at sharp curve shall not to more than 5mm), including making drainage opening wherever required complete etc. as per direction of Engineer-in-charge (length of finished kerb edging shall be measured for payment). (Precast C.C. kerb stone shall be approved by Engineer-in-charge). DSR -
2021, Item No.
16.69
34
250444
7366
Providing and laying factory made chamfered edge Cement Concrete paver blocks in footpath, parks, lawns, drive ways or light traffic parking etc, of required strength, thickness & size/ shape, made by table vibratory method using PU mould, laid in required colour & pattern over 50mm thick compacted bed of sand, compacting and proper embedding/laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with sand and cutting of paver blocks as per required size and pattern, finishing and sweeping extra sand. complete all as per direction of Engineer-inCharge. 80 mm thick C.C. paver block of M-35 grade with approved colour design and pattern. DSR-2023, Item No. 16.91.2
1530
1214820
794
Providing and laying in position specified grade of reinforced cement concrete, excluding the cost of centering, shuttering, finishing and reinforcement - All work up to plinth level : 1:1.5:3 (1 cement : 1.5 coarse sand (zone-iii) derived from natural sources : 3 graded stone aggregate 20 mm nominal size derived from natural sources)DSR-2023, Item No.5.1.2
55
362230
6586
Providing and placing in position 100 mm thick factory made machine batched & machine mixed PrecastRCC Rectangular Covers on drains of footpath of various sizes, of M-25 grade cement concrete for RCC work, including cost of centering, shuttering, reinforcement of 8 mm dia TMT bars of Fe 500 grade @ maximum 100mm c/c on both ways , neat cement punning on finished surface, properly encased on all edges with 1.6 mm thick , 100 mm wide MS sheet duly painted over priming coat , reinforcement to be welded at edges with MS sheet and providing 2 Nos. 12 mm dia bar for hooks etc i/c cost of cartage, all leads & lift, handling at site etc. all complete as per direction of Engineer-in-Charge. DSR-2023, Item No.16.93
26
58344
2244
Providing and laying S&S Centrifugally Cast (Spun) / Ductile Iron Pipes conforming to IS : 8329: DSR-2023, Item No.18.72 100 mm dia Ductile Iron Class K-9 pipes 18.72.15
30
29370
979
150 mm dia Ductile Iron Class K-9 pipes 18.72.16
40
53520
1338
Providing flanged joints to double flanged C.I./ D.I. pipes and specials, including testing of joints : DSR-2023, Item No.18.30 100 mm diameter pipe@ 5.0mc/c 18.30.2
9
2169
241
150 mm diameter pipe@ 5.0mc/c 18.30.4
11
3102
282
Providing and laying S&S C.I. standard specials such as tees, bends, collars, tapers, caps etc. (Heavy class) Up to 300 mm dia DSR-2023, Item No. 18.25.1
3
13875
4625
Providing and laying S&S C.I. Standard specials suitable for mechanical jointing as per IS : 13382 Up to 300 mm dia DSR-2023, Item No. 18.67.1
4
40088
10022
Constructing masonry Chamber 30x30x50 cm inside, in brick work in cement mortar 1:4 (1 cement :4 coarse sand) for stop cock, with C. I. surface box 100x100 x75 mm (inside) with hinged cover fixed in cement concrete slab 1:2:4 mix (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size), i/c necessary excavation, foundation concrete 1:5:10 ( 1 cement : 5 fine sand : 10 graded stone aggregate 40mm nominal size ) and inside plastering with cement mortar 1:3 (1 cement : 3 coarse sand) 12mm thick, finished with a floating coat of neat cement complete as per standard design :With common burnt clay F.P.S.(non modular) bricks of class designation 7.5 DSR-2023, Item No. 18.32.1
24
34800
1450
Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings This includes jointing of pipes & fittings with one step CPVC solvent cement, trenching, refilling & testing
of joints complete as per direction of Engineer in Charge. External work DSR-2023, Item No. 18.920mm nominal outer dia pipes 18.9.2
60
11940
199
25mm nominal outer dia pipes 18.9.3
70
18060
258
50mm nominal inner dia pipes 18.9.6
60
34680
578
40mm nominal inner dia pipes 18.9.5
30
12270
409
Providing and fixing brass ferrule with C.I. mouth cover including boring and tapping the main : DSR-2023, Item No.18.20 20mm nominal bore
6
1656
276
25mm nominal bore 18.20.3
6
2124
354
Providing and fixing gun metal gate valve with C.I. wheel of approved quality {screwed end): DSR-2023, Item No 18.17 25mm nomiinal bore 18.17.1
9
4077
453
50mm nomiinal bore 18.17.4
12
8964
747
40mm nomiinal bore 18.17.3
12
7212
601
Providing and fixing C.I. double acting air valve of approved quality with bolts, nuts, rubber insertions etc. complete (The tail pieces, tapers etc if required will be paid separately) : DSR-2023, Item No. 18.5950 mm dia
3
12555
4185
80 mm dia 18.59.2
3
15276
5092
Provideing and fixing C.I. Sluice Valves (with cap) complete with bolts, nuts, rubber insertions etc. (the tail pieces if required will be paid separtely): DSR-2023, Item No.18.31.1 100mm diameter Class II 18.31.1.2
6
21780
3630
150mm diameter Class II 18.31.3.2
3
15972
5324
Constructing masonry Chamber 60x60x75 cm, inside in brick work in cement mortar 1:4 (1 cement : 4 coarse sand) for fire hydrants, with C.I. surface box 350x350 mm top and 165 mm deep ( inside) with chained lid and RCC top slab 1:2:4 mix (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) , i/c necessary excavation, foundation concrete 1:5:10 (1 cement : 5 fine sand:10 graded stone aggregate 40 mm nominal size) and inside plastering with cement mortar 1:3 (1 cement : 3 coarse sand) 12 mm thick, finished with a floating coat of neat cement complete as per standard design : With common burnt clay F.P.S.(non modular) bricks of class designation 7.5 DSR-2023, Item No. 18.36.1
12
90468
7539
Constructing brick masonry circular type manhole 0.91 m internal dia at bottom and 0.56m dia at top in cement mortar 1:4 (1 cement : 4 coarse sand), inside cement plaster 12 mm thick with cement mortar 1:3 (1 cement : 3 coarse sand) finished with a floating coat of neat cement, foundation concrete 1:3:6 mix (1 cement : 3 coarse sand : 6 graded stone aggregate 40 mm nominal size), and making necessary channel in cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) finished with a floating coat of neat cement, all complete as per standard design : 0.91 m deep with S.F.R.C. cover and frame (heavy duty, HD-20 grade designation) 560 mm internal diameter conforming to I.S. 12592, total weight of cover and frame to be not less than 182 kg., fixed in cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) including centering, shuttering all complete. (Excavation, foot rests and 12mm thick cement plaster at the external surface shall be paid for separately) : With Sewer bricks conforming to IS : 4885 DSR-2023, Item No. 19.9.1.2
9
82566
9174
Extra depth for circular type manhole 0.91m internal dia (at bottom) beyond 0.91 m to 1.67 m With Sewer bricks conforming IS : 4885 DSR-2023, Item No. 19.10.2
3
16269
5423
Constructing brick masonry circular manhole 1.22 m internal dia at bottom and 0.56 m dia at top in cement mortar 1:4 (1 cement :4 coarse sand) inside cement plaster 12 mm thick with cement mortar 1:3 (1 cement : 3 coarse sand) finished with a floating coat of neat cement foundation concrete 1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 40 mm nominal size) and making necessary channel in cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) finished with a floating coat of neat cement, all complete as per standard design : 1.68 m deep with SFRC Cover and frame (heavy duty HD-20 grade designation) 560 mm internal diameter conforming to I.S. 12592, total weight of cover and frame to be not less than 182 kg. fixed in cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) including centering, shuttering all complete. (Excavation, foot rests and 12 mm thick cement plaster at the external surface shall be paid for separately) : With Sewer bricks conforming IS : 4885 DSR-2023, Item No. 19.11.1.2
6
106800
17800
Extra depth for circular type manhole 1.22 m internal dia (at bottom) beyond 1.68 m to 2.29 m : With Sewer bricks conforming IS : 4885 DSR-2023, Item No. 19.12.2
3
21132
7044
Providing orange colour safety foot rest of minimum 6 mm thick plastic encapsulated as per IS : 10910, on 12 mm dia steel bar conforming to IS: 1786, having minimum cross section as 23 mmx25 mm and over all minimum length 263 mm and width as 165 mm with minimum 112 mm space between protruded legs having 2 mm tread on top surface by ribbing or chequering besides necessary and adequate anchoring projections on tail length on 138 mm as per standard drawing and suitable to with stand the bend test and chemical resistance test as per specifications and having manufacture’s permanent identification mark to be visible even after fixing, including fixing in manholes with 30x20x15 cm cement concrete block 1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size) complete as per design. DSR-2023, Item No.19.16
66
26598
403
Providing and laying Non Pressure NP-3 class (Medium duty) R.C.C. pipes including collars/ spigot jointed with stiff mixture of cement mortar in the proportion of 1:2 (1 cement : 2 fine sand) including testing of joints etc. complete 450 mm dia RCC pipes. DSR-2023, Item No.19.35.1
60
116880
1948
Extra for every additional lift of 1.5 m or part thereof in excavation / banking excavated or stacked materials. All kinds of soil DSR-2023, Item No.2.26.1
264
24024
91
Supplying and filling in plinth with sand under floors, including watering, ramming, consolidating and dressing complete. DSR-2023, Item No.2.27
24
37104
1546
Boring/drilling bore well of required dia for casing/ strainer pipe, by suitable method prescribed in IS: 2800 (part I), including collecting samples from different strata, preparing and submitting strata chart/ bore log, including hire & running charges of all equipments, tools, plants & machineries required for the job, all complete as per direction of Engineer-in-charge, upto 90 metre depth below ground level. All types of soil 300 mm dia DSR-2023, Item No. 23.1.1.1
50
25750
515
Supplying, assembling, lowering and fixing in vertical position in bore well, unplasticized PVC medium well casing (CM) pipe of required dia, conforming to IS: 12818, including required hire and labour charges, fittings & accessories etc. all complete, for all depths, as per direction of Engineer -in-charge. 150 mm nominal size dia DSR-2023, Item No. 23.3.2
25
14425
577
Supplying, filling, spreading & leveling stone boulders of size range 5 cm to 20 cm, in recharge pit, in the required thickness, for all leads & lifts, all complete as per direction of Engineer-in-charge. DSR-2023, Item No. 23.5
10
10990
1099
Supplying, filling, spreading & leveling gravels of size range 5 mm to 10 mm, in the recharge pit, over the existing layer of boulders, in required thickness, for all leads & lifts, all complete as per direction of Engineer-in-charge. DSR-2023, Item No. 23.6
10
11200
1120
Gravel packing in tubewell construction in accordance with IS: 4097, including providing gravel fine/ medium/ coarse, in required grading & sizes as per actual requirement, all complete as per direction of Engineer-in-charge. DSR-2023, Item No. 23.7
10
11200
1120
Gravel packing in tubewell construction in accordance with IS: 4097, including providing gravel fine/ medium/ coarse, in required grading & sizes as per actual requirement, all complete as per direction of Engineer-in-charge. DSR-2023, Item No. 23.8
14
20636
1474
Providing and fixing suitable size threaded mild steel cap or spot welded plate to the top of bore well housing/ casing pipe, removable as per requirement, all complete for borewell of: 150 mm dia DSR-2023, Item No. 23.13.2
5
895
179
Making soak pit 2.5 m diameter 3.0 metre deep with 45 x 45 cm dry brick honey comb shaft with bricks and S.W. drain pipe 100 mm diameter, 1.8 m long complete as per standard design. With common burnt clay F.P.S. (non modular) bricks of class designation 7.5DSR-2023, Item No. No. 19.32.1
7
136906
19558
Wiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in surface / recessed medium class pvc conduit, with modular switch, modular plate, suitable GI box and earthing the point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable etc. as required.DSR-2022 -1.10.3 Group C Point wiring in PVC conduit, with modular type switch :-
170
189550
1115
Wiring for group controlled (looped) light point/fan point/exhaust fan point/ call bell point ( without independent switch etc.) with 1.5 sq. mm FRLS PVC insulated copper conductor single core cable in surface/ recessed PVC conduit, and earthing the point with 1.5 sq. mm FRLS PVC insulated copper conductor single core cable etc. as required. Group C DSR-2022-1.55.3 Twin Control Point wiring in PVC conduit, with modular type switch :-
110
71720
652
Wiring for light/ power plug with 2X4 sq. mm FRLS PVC insulated copper conductor single core cable in surface/ recessed medium class pvc conduit alongwith 1 No. 4 sq. mm FRLS PVC insulated copper conductor single core cable for loop earthing as required. DSR-2022- 1.12Circuit / Sub main wiring in PVC conduit :-
700
177100
253
Wiring for circuit/ submain wiring alongwith earth wire with the following sizes of FRLS PVC insulated copper conductor, single core cable in surface/ recessed medium class pvc conduit as required. 2 X 1.5 sq. mm + 1 X 1.5 sq. mm earth wire. DSR-2022-1.14.1
350
61950
177
2 X 2.5 sq. mm + 1 X 2.5 sq. mm earth wire. (DB to switch board) DSR-2022-1.14.2
375
78375
209
2 x 6 sq.mm. + 1 x 6 sq.mm. Earth wire DSR-2022-1.14.4
205
68265
333
2 x 10 sq.mm. + 1 x 6 sq.mm. Earth wire DSR-2022-1.14.5
115
49795
433
4 x 10 sq.mm. + 2 x 6 sq.mm. Earth wire DSR-2022-1.14.10
140
106960
764
4 x 16 sq.mm. + 2 x 6 sq.mm. Earth wire DSR-2022-1.14.11
100
103700
1037
Supply and fixing of suitable size GI box with modular plate and cover in front on surface or in recess including providing and fixing 3 pin 5/6 amps modular socket outlet and 5/6 amps. modular switch, connection etc. as required. S/F light plug point Modular type accessories :- DSR-2022- 1.31
55
19910
362
Supply and fixing of suitable size GI box with modular plate and cover in FRLSont on surface or in recess, including providing and fixing 6 pin 5/6 & 15/16 amps modular socket outlet and 15/16 amps. modular switch, connection etc. as required. S/F power plug point modular type accessories :- DSR-2022- 1.32
60
26700
445
Supply and fixing two module stepped type electronic fan regulator on the existing modular plate switch box including connections but excluding modular plate etc. as required. S/F modular type electronic fan regulator :- 2 Module DSR-2022- 1.25
61
17080
280
S/F modular type blanking plate Supplying and fixing following size/ modules, GI box alongwith modular base & cover plate for modular switches in recess etc. as required. 1 Or 2 Module (75mmX75mm) DSR-2022- 1.27.1
5
1130
226
3 Module (100mmX75mm) DSR-2022- 1.27.2
38
9424
248
4 Module (125mmX75mm) DSR-2022- 1.27.3
32
8320
260
6 Module (200mmX75mm) DSR-2022- 1.27.4
19
5795
305
8 Module (125mmX125mm) DSR-2022- 1.27.5
90
31050
345
Supplying and fixing of following ways surface/ recess mounting, vertical type, 415 V, TPN MCB distribution board of sheet steel, dust protected, duly powder painted, inclusive of 200 A tinned copper bus bar, common neutral link, earth bar, din bar for mounting MCBs (but without MCBs and incomer ) as required . (Note : Vertical type MCB TPDB is normally used where 3 phase outlets are required.) 12 way (4 + 36), Double Door DSR-2022- 2.5.3
4
39024
9756
Supplying and fixing following way, single pole and neutral, sheet steel, MCB distribution board, 240 V, on surface/ recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections, powder painted including earthing etc. as required. (But without MCB/RCCB/Isolator) 8 way , Double door DSR-2022- 2.3.2
7
13692
1956
12 way , Double door DSR-2022- 2.3.3
8
14080
1760
Supplying and fixing following way, horizontal type TP&N, sheet steel MCB distribution board, 415 V on surface /recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections, powder painted including earthing etc. as required (But without MCB / RCCB / Isolators). 8 way (4 + 24), Double door DSR-2022- 2.4.3
5
22680
4536
Supplying and fixing 5 A to 32 A rating, 240/415 V, 10 kA, "C" curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required. Single Pole DSR-2022- 2.10.1
35
6790
194
Double Pole DSR-2022- 2.10.3
14
6972
498
Supplying and fixing following rating, Single/ double/ three pole, 230/ 415 volts, MCB "C" curve in the existing MCB DB complete with connections, testing and commissioning etc. as required. 40 amps DP MCB Double Pole
7
8155
1165
TRIPLE POLE 63 amps MCB
4
7256
1814
FOUR POLE40 amps 4P MCB
1
2288
2288
63 amps 4P MCB
1
2288
2288
Supplying and fixing following rating, double pole, (single phase and neutral), 240 volts, residual current circuit breaker (RCCB), having a sensitivity current upto 30 mA in the existing MCB DB complete with connections, testing and commissioning etc. as required. 2 Pole 40A, 30mA DSR-2022- 2.14.2
22
44176
2008
2 Pole 63A, 30mA DSR-2022- 2.14.3
22
45518
2069
Providing and fixing following rating and breaking capacity and pole MCCB with thermomagnetic release and terminal spreaders in existing cubicle panel board including drilling holes in cubicle panel, making connections, etc. as required. 100 A, 16 KA,TPMCCB DSR-2022- 2.2.1
4
11328
2832
S/F MODULAR TYPE SWITCH / SOCKET :-Supplying and fixing following modular switch / socket on the existing modular plate & switch box including connections but excluding modular plate etc as required Telephone Socket outlet DSR-2022- 1.24.6
14
1568
112
TV Antenna socket outlet DSR-2022- 1.24.7
8
896
112
Supply and fixing of following sizes of medium class PVC conduit along with accessories in surface/recess including cutting the wall and making good the same in case of recessed conduit as required : 20 mm. DSR-2022- 1.21.1
190
18430
97
25 mm DSR-2022- 1.21.2
190
20900
110
32 mm DSR-2022- 1.21.3
130
18070
139
Supply and drawing following pair, 0.5 sq.mm. FRLS PVC insulated annealed copper conductor, unarmoured telephone cable in the existing surface / recessed steel/ PVC conduit as required.2 Pair DSR-2022- 1.18.2
190
5320
28
Supply and drawing co-axial TV cable RG-6 grade, 0.7 mm. Solid copper conductor PE insulated, shielded with fine tinned copper braid and protected with PVC sheath in the existing surface / recessed steel/ PVC conduit as required. DSR-2022- 1.19
200
7000
35
Supply and fixing recessed mounting LED down lighter, LED of 1 to 3 Watt each assembled on single MCPCB, having color temp upto 6500K & having 50000 burning hrs. life with minimum @ L 70, system lumen output should be minimum with efficacy100 lm/Watt.
LED driver PF 0.95, THD 20% & surge protection 4KV. The colour rendering index of LED light should be more than 70. Housing made of pressure die cast aluminium/CRCA powder coated frame with glare free diffused polycarbonate cover. Submission LM 79- 08/IS16106 (2012), IEC60598, IEC61347i/c connection wire, testing etc. to complete the job.
a) 12 Watt, color temp 3000-6500k as required.
35
42630
1218
18/20Watt, color temp 3000-6500k as required.
50
82650
1653
Supplying, fixing and testing of approved make LED bulkhead ABS body, PC diffuser including fixing on wall as required, with necessary material complete. 10W IP 55
22
30624
1392
Ultra bright LED Tubelight (single side connection) with very high efficacy =105 lm/W best suited for installation in existing tubelight luminaire with G13 lamp holders to give glare free light. Tube light LED 1 X 20/22Watt, Integral i/c batten aluminium body,
PC diffuser.
130
73450
565
40W Surface /Suspended and wall mounted LED batten, CRCA housing provided for efficient heat dissipation with polycarbonate diffuser & built-In electronic driver with THD10% & Lumen efficacy =115 lm/W
110
119570
1087
Supply and fixing as per specification polycarbonate batten holder/angle holder of approved make with necessary materials complete for 12 Watt250Volt LED LAMPProviding and erection of hot dipped galvanized octagonal poles in single section made from 3mm thick sheet having lockable weather proof flush door junction box, suitable size & type of foundation bolts 4 nos. 'J' type (EN8 grade) complete, erected in an approved manner on provided foundation.
40
26080
652
Erection of RCC/ PCC pole of following length in brick ballast and ramming the foundation, finishing with 150mm thick cement concrete (1:3:6) layer on top with including excavation and refilling etc as required. Above 4.5 metre and upto 6.5 metre DSR-2022- 11.1.1
5
21155
4231
Above 6.5 metre and upto 8.0 metre DSR-2022- 11.1.2
2
9392
4696
45W LED STREET light for 7.5 meter height pole
2
10788
5394
25W LED STREET light for 4.5 meter height
2
4472
2236
Providing and erection on existing foundation12.5 meter high mast lighting system suitable to install 6 No. 2 x 400 w M.H/S.V/LED flood light fitting and control gear with integral Power tool, weight 340 kg.
comprising of 2 section of hot dipped galvanized materials as per BSEN ISO 1461 thickness 3 mm, dia 100mm & 360mm for top and bottom respectively, stress fitting arrangement on site with 350mm overlap dynamic loading to withstand max wind pressure as per -IS 875 part III, parameters for structural & foundation design must be taken from wind tunnel test. Lightning protection of GI single spike 800mm at top and at base inside compartment with double internal lock with adequate size of MCB erected on PVC board complete with base plate of 25mm thick 520mm dia. and foundation bolts having 4 nos. bolts of 24mm dia, 750mm long (EN8 grade), Anchor plate 445 PCD, including accessories viz 1. Lantern carriage of 50 NB ERW class-B, MS pipe covered with PVC sleeve suitable to carry 250kg. Load and upto 6 fittings symmetrically.
2. Trailing copper cable 5x2.5 sq.mm, EPR insulated PCP sheathed.
3. Double drum/350kg winch having gear 53:1, oil bath (SAE90/140) arrangement.
4. 2 nos. stainless steel wire ropes 5mm dia (7/19) breaking load capacity 1450 kg.x 2.
5. Integral power tool 3-phase, 0.75 HP 2m/min
single speed.
6. Feeder pillar fabricated out of 14 SWG CRCA sheet and comprise of incoming MCB 32 A TPN switch, HRC fuses, single dial timer, suitable size of contactors for lighting and power tool, 2 nos. outgoing, reversing switch for motor.
7. Foundation drawing, test certificate and guarantee certificate shall be provided by manufacturer.
1
157349
157349
Supply, Installation, wiring, connection, testing and commissioning of 80W highbay light conforming to the technical specifications & drawings forming part of this document.
16
103360
6460
Supply, Installation, wiring, connection, testing and commissioning of 15W Tree light/Spike Light conforming to the technical specifications & drawings forming part of this document.
17
70992
4176
Supply insttalation , testing and commisioning of following size ceiling fan 3 balde confirming to IS : 374:2019 incuding wiring thedown roads of standed lenth ( upto 30 cm ) with 1.5 sqmm PR PVC, insulated copper wire suitable for 230V 50Hz single phase supply etc. compleyte as required. 1200mm (48 Degree) BLDC 5 star rating 32W ceiling fan
40
170360
4259
Supply and fixing circular/ hexagonal M.S. sheet ceiling fan box with clamp of internal dia 140mm, 73 mm height, 3mm thick rim top lid of 1.5mm thick M.S sheet lidss shall be screwed into M.S. box by means of 3mm round headed screws, clamps shall be made of 12 mm dia M.S bar bent to be shape as per standard drawing with over all length as 80 cm
40
12000
300
Supply and fixing of step type electronic fan regulator on existing modular plate switch box including connection but excluding modular plate etc as required.
40
14760
369
Installation, testing and commissioning of ceiling fan, including wiring the down rods of standard length (upto 30 cm) with 1.5 sq. mm FRLS PVC insulated, copper conductor, single core cable, including providing and fixing phenolic laminated sheet cover on the fan box etc. as required.
40
13560
339
Installation of exhaust up to 450mm sweep in the existing opening, including making the hole to suit the size of the above fan, making good the damage, connection, testing, commissioning etc. as required DSR-2022- 1.50.1
40
13680
342
Extra for fixing the louvers/ shutters complete with Frame for a exhaust fan of all sizes DSR-2022- 1.51
28
4396
157
Supplying, installing, testing and commissioning of 11/0.433 KV Substation equipment comprising of HT panel, bus trunking from transformer to LT panel, LT panels, Automatic power factor correction panel, active harmonic filters, TVSS (Transient Voltage Supression System), SPD (Surge Protection System), essential panel, earthing, required inter-connections, substation safety equipments including cabling from substation to the buildings fed by the substation. PAR-2023-6.2.1
132
864996
6553
SITC of LT switchgear panels suitable for 433 V, 3 phase, 4 wire, 50 Hz power distribution system. The panel shall be Indoor, free standing, floor mounting, sheet metal clad, cubicle, dead front, dust and vermin proof type compartmentalised design fabricated out of 14 SWG CRCA sheet steel, complete with colour coded, heat shrinkable PVC insulated, aluminium bus bars and separate earth bus bar of adequate cross section through out the length of the panel. The incoming and outgoing feeders shall be accommodated in a fully segregated, modular multitier arrangement with adequate size and distinct cable alley, bus bar alley/chamber. The panel shall be complete with name plate, earthing, numbering, danger plate etc. as per specifications and drawings as required The panel shall withstand the fault level of 35kA as per Single line Diagram. The Panel shall also be capable to communicate status like ON/OFF/ Trip through Modbus/Ethernel for major component like ACB, MCCB, MCB & Multifunation meters. The Main LT Panel shall use all draw out type breakers suitable for 415 V AC, 3 phase, 50 Hz, 3 phase 4 wire supply system. Air Circuit Breakers,microprocessor release for overload, short circuit, instantaneous & earth fault protection with Current & Voltage metering & should have capability to communicate. INCOMING: I Nos. 125 Amp FP MCCB 25KA. BUS BARS: I Nos. 150 Amp TPN busbars of COPPER as per SLD. OUTGOING: I Nos. 150 Amp TPN busbars of COPPER as per SLD. 4 Nos. 40 Amp FP MCB IO Ka. INSTRUMENTS: 1 sets of multifunction meter with parameter rent,voltage,KWH,KVAH,Power factor on incoming from transformers. Class Accuracy 0.5 with RS485 Port. 1 Sets of phase indicating lights (RYB) with protection fuses (one set for each incoming breaker). 1 Sets of phase indicating lights (RYB) with protection fuses (one set for each incoming breaker). I Sets auto trip indicating lamp . Note: All outgoings should have ammeter and RYB indications with backun MCB as indicated in single line diagrams. Short Circuit Breaking capacity should not less than 25KA: Approved Rate of Mukta Kashi
8
688560
86070
(SOLAR PHOTO VOLTAIC POWER GENERATOR SYSTEM) Supplying, installation, testing and commissioning of grid interactive roof top solar photo voltaic power generation system including space frame Plinth Area Rate (2023), Item No. 6.8.1
5
212905
42581
Evaluation Notes How It Works ?
Potential Partner
Select Your Requirements