Lucknow Development Authority Tender
If you're a registered bidder for etender UP and want to inquire about any e-tender UP government has posted, this is your stop. No need to enter every detail on the website of <a href="https://etender.up.nic.in">etender.up.nic.in</a> - BidAssist filters will help you find the exact UP etender you're looking for. Read to learn how to search & bid for etender UP.
Lucknow Development Authority - LDA Tender
Civil And Construction
Eprocure
Opening Date10 Jan 2024
Closing Date15 Jan 2024
Tender Amount₹ 6,73,95,072
Costs
EMD
₹ 13,47,900Document Cost
₹ 4,366Tender Fee
Refer Documents
Description
Scription for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user
Contact
Tender Id
2024_LDAUP_879428_1Bid Award Id
ViewTender No
84/E-NIVIDA/CE/2023-24_01Tender Authority
Lucknow Development Authority ViewPurchaser Address
-Website
http://http://www.ldalucknow.co.in/
GEM & Bid Advisory Services
Get portal registration, tender bidding, product/service listing or vendor/MSME certification services at a nominal cost
Documents
C G CITY ke Uttari Bhag me gol chaurahe se FOB ke Neeche food court, Parking wa kids zone viksit kiye jane ka karya.
C G CITY ke Uttari Bhag me gol chaurahe se FOB ke Neeche food court, Parking wa kids zone viksit kiye jane ka karya.
C G CITY ke Uttari Bhag me gol chaurahe se FOB ke Neeche food court, Parking wa kids zone viksit kiye jane ka karya.
BOQ Items
Providing and laying gang saw cut 50 mm thick sand stones of section 550×110×50 mm with existing pattern [taj/mandana choclate/mandana red in the ratio of 33% each] I required design [sinple geometrical abstract etc] and in patterns in combination with sand stone of different colours shades and finished surface texture etc.in liner portion of the floor all compiet as per architectural drawing laid over 20mm [average] thick base of cement mortar 1:3 [1 cement 3 coarse sand laid and jointed with white cement slurry @4.4 kg/sqm incluidng pointing with white cement slurry admixed with pigment to match the sand stone shade including rubbing curing and polishing etttc. complete as specified and as directed by the E/l. : LDA PSR
840
2206680
2627
Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in foundation and plinth in: Cement mortar 1:4 (1 cement : 4 coarse sand) PWD 6.1.1
36.8
247112
6715
Providing and laying at or near ground level factory made kerb stone of M-20 grade cement concrete in position to the required line, level and curvature, jointed with cement mortar 1:3 (1 cement: 3 coarse sand), including making joints with or without grooves (thickness of joints except at sharp curve shall not to more than 5mm), including making drainage opening wherever required complete etc. as per direction of Engineer-in-charge (length of finished kerb edging shall be measured for payment). (Precast C.C. kerb stone shall be approved by Engineer-in-charge).
42
361869
8615.93
PAVING
-
-
-
Earth work in excavation by mechanical means (Hydraulic excavator) / manual means over areas (exceeding 30cm in depth. 1.5 m in width as well as 10 sqm on plan) including disposal of excavated earth, lead upto 50m and lift upto 1.5m, disposed earth to be levelled and neatly dressed. All kinds of soil : PWD 2.6.1
70
11270
161
Cement Concrete with 40 mm gauge approved stone ballast, coarse sand and cement in proportions of 8:4:1 including supply of all materials, labours,tools & plants etc. required for poper completion of the work, Excluding GST : PWD 4.1.8
235
1433265
6099
Providing and laying matt finished vitrified tile of size 300x300x9.8mm having with water absorption less than 0.5% and conforming to IS: 15622 of approved make in all colours and shades in for outdoor floors such as footpath, court yard, multi modals location etc., laid on 20mm thick base of cement mortar 1:4 (1 cement : 4 coarse sand) in all shapes & patterns including grouting the joints with white cement mixed with matching pigments etc. complete as per direction of Engineer-in-Charge : PWD 16.69
2000
2282000
1141
Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in foundation and plinth in: Cement mortar 1:4 (1 cement : 4 coarse sand) : PWD 6.1.1
46
308890
6715
Providing and laying at or near ground level factory made kerb stone of M-20 grade cement concrete in position to the required line, level and curvature, jointed with cement mortar 1:3 (1 cement: 3 coarse sand), including making joints with or without grooves (thickness of joints except at sharp curve shall not to more than 5mm), including making drainage opening wherever required complete etc. as per direction of Engineer-in-charge (length of finished kerb edging shall be measured for payment). (Precast C.C. kerb stone shall be approved by Engineer-in-charge). P.S.R.
52.5
452336
8615.93
SURFACE PARKING
-
-
-
Earth work in excavation by mechanical means (Hydraulic excavator) / manual means over areas (exceeding 30cm in depth. 1.5 m in width as well as 10 sqm on plan) including disposal of excavated earth, lead upto 50m and lift upto 1.5m, disposed earth to be levelled and neatly dressed. All kinds of soil : PWD 2.6.1
21
3381
161
Cement Concrete with 40 mm gauge approved stone ballast, coarse sand and cement in proportions of 8:4:1 including supply of all materials, labours,tools & plants etc. required for poper completion of the work, Excluding GST : PWD 4.1.8
190.5
1161859
6099
Supplying & Laying of 80 mm thick Rubber Moulded M-30 Grade Interlocking Tile including sand bed and sand filling in joints etc all complete in direction of engineer in charge. Red / Grey Colour
1800
1764000
980
Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in foundation and plinth in: Cement mortar 1:4 (1 cement : 4 coarse sand) PWD 6.1.1
13.8
92667
6715
Providing and laying at or near ground level factory made kerb stone of M-20 grade cement concrete in position to the required line, level and curvature, jointed with cement mortar 1:3 (1 cement: 3 coarse sand), including making joints with or without grooves (thickness of joints except at sharp curve shall not to more than 5mm), including making drainage opening wherever required complete etc. as per direction of Engineer-in-charge (length of finished kerb edging shall be measured for payment). (Precast C.C. kerb stone shall be approved by Engineer-in-charge).
15.75
135700
8615.93
SHOPS For Vender
-
-
-
Providing & fixing of Food Kisok (Airport or Mall type) including alluminium/ S.S frame & with Partition, flooring with panelling & false Ceiling, ic. all required material & specification as per site including counter top & Plumbing, electrical work, inlcuding proper arragement of locking system etc complete with necessary T&P in direction of engineer in charge.
1450.45
7034677
4850
Providing & fixing of Table with both Seating front of food kiosk table as per drawing & Design etc all complete in direction of engineer in charge.
15
675000
45000
Providing & fixing of Centre Pole Umbrella Made in PVC coated Polyster fabric and frame made in stainless steel and powder coated base weight 150 Kg approx and base size 900x900 mm etc including all necessary T&P all complete in direction of engineer in charge .Model Single CENTER POLE UMBRELLA SINGLE VOLA ROUND 2.4 mtr x 2.4 mtr SINGLE POLE UMBRELLA Make Loomcraft/ Western outdoor/ Mccoy)
15
780000
52000
Providing & fixing of Tensile Fabric Canopy fixing in metal Space frame with R.C.C. Foundation with Required LED lighting and fittings as per design and approval of architect and work complete in direction of engineer in charge. (Make Loomcraft/ Western outdoor/ Mccoy)
111.88
1510323
13500
Seating
25
625000
25000
Umbrela
20
700000
35000
Tensil Fabric Canopy
110
1485000
13500
GAZEEBO
-
-
-
Clearing jungle including uprooting of rank vegetation ,grass, brush wood, trees and saplings of girth upto 30 cm measured at a height of 1 m above ground level and removal of rubbish upto a distance of 50 m outside the periphery of the area cleared. PWD 2.31
196
1176
6
Excavation of foundation in ordinary soil (loam clay or sand) including lift upto 1.50 meter and lead upto 30 meter and including filling, watering and ramming of excavated earth into the trenches or into the space between the building and sides of foundation trenches or into the plinth and removal and disposal of sur-plus earth as directed by the Engineer incharge up to a distance of 30 meters from the foundation trenches. PWD 2.6.1
81
13041
161
Providing and laying in position cement concrete of specified grade excluding the cost of centring and shuttering-all work up to plinth level. 1:4:8 (1 Cement :4 coarse sand :8 graded stone aggregate 40 mm nominal size) : PWD 4.1.8
8.12
49523
6099
Providing and laying in position machine batched and machine mixed design mix M-25 grade cement concrete for reinforced cement concrete work, using cement content as per approved design mix, including pumping of concrete to site of laying but Excluding the cost of centering, shuttering, finishing and reinforcement, including admixtures in recommended proportions as per IS: 9103 to accelerate, retard setting of concrete, improve workability without impairing strength and durability as per direction of Engineer-in-charge. (Note :- Cement content considered in this item is @ 330 kg/cum. Excess/less cement used as per design mix is payable/recoverable separately). All Work Above Plinth Level upto Floor V level PWD 5.37.2
36.2
297346
8214
Reinforcement for RCC work including straightening, cutting, bending, placing in position complete. - Thermo-Mechanically Treated bars. PSR
56.8
454400
8000
Providing and fixing M.S. angle 50x50x5 mm to act as nosing with lugs of M.S. flat 10x5 mm, 10 cm long, forked at end 60cm apart (minimum three lugs to be provided), including necessary welding and applying a priming coat of approved primer on exposed surface etc. complete A.R. DSR 11.35
172.8
15878
91.89
Structural steel work riveted, bolted or welded in built up sections, trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete. PWD 10.2
792
59400
75
Providing wood work in frames of / Railing / false ceiling, partitions etc. sawn and fixed in position with necessary stainless steel screws etc. Sal wood A.R. DSR 9.3.1
17.4
1348095
77476.77
Centering and shuttering including strutting, propping etc. and removal of form for : Foundations, footings, bases of columns, etc. for mass concrete PWD 5.9.1
165.6
27986
169
12 mm cement plaster of mix : 1:6 (1 cement: 6 coarse sand) PWD 13.4.2
123.84
21672
175
25 mm wooden planking, tongued and grooved in flooring, including fixing with iron screws complete with : Second class teak wood A.R. DSR 11.33.1
144
415249
2883.68
French spirit polishing : Two or more coats on new works including a coat of wood filler A.R. as per DSR 13.68.1
514.24
104390
203
PERGOLA
-
-
-
Excavation in foundation in ordinary soil (loam clay or sand) including lift up to 1.5 m and lead up to 30m. And including filling watering and ramming of excavated earth into the space between the building and the sides removal and disposal of surplus earth as directed by the engineer in charge up to a distance of 30m from the doundation trenches including all T&P phowarah and basket etc. complete. PWD 2.6.1
36.84
5931
161
Excavating, supplying and filling of local earth (including royalty) by mechanical transport upto a lead of 5km also including ramming and watering of the earth in layers not exceeding 20 cm in trenches, plinth, sides of foundation etc. complete. PWD 2.25A
59.52
6130
103
Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level : 1:4:8 (1 Cement : 4 coarse sand : 8 graded stone aggregate 40 mm nominal size) (PWD 4.1.8)
12.12
73919
6099
Providing and laying cement concrete in retaining walls, return walls, walls (any thickness) including attached pilasters, columns, piers, abutments, pillars, posts, struts, buttresses, string or lacing courses, parapets, coping, bed blocks, anchor blocks PWD 4.2.2
3.87
32538
8408
As in item above but for slabs (Using 1:1.5:3 Mix concrete) PWD 4.2.2
1.35
11350
8408
Diluting and injecting chemical emulsion for PRE-CONSTRUCTIONAL anti-termite treatment (excluding the cost of chemical emulsion) Treatment of soil under existing floors using chemical emulsion @ one litre per hole, 300 mm apart including drilling 12 mm diameter holes and plugging with cement mortar 1 :2 (1 cement : 2 Coarse sand) to match the existing floor: With Chlorpyriphos/Lindane E.C. 20% with 1% concentration : PWD 2.35.3)
46.23
10078
218
Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in foundation and plinth in: Cement mortar 1:6 (1 cement : 6 coarse sand) PWD 6.1.2
14.76
96220
6519
Providing beams including hoisting, fixing in position and applying wood preservative for the unexposed surfaces, etc. complete with : Sal wood beams PSR
1.62
125512
77476.77
Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete Thermo-Mechanically Treated bars of grade Fe-500D or more.
5.67
45360
8000
Providing and fixing Cast iron Pillar made of Hollow tubes, channels, plates etc., including welding, grinding, buffing, polishing and making curvature (wherever required) and fitting the same with necessary iron nuts and bolts complete, i/c fixing the Column with necessary accessories & iron dash fasteners, iron bolts etc., of required size, on the top of the floor with suitable arrangements, all complete as per approved design/ Drawing and etc all complete of direction of Engineer-in-charge, (DECORATIVE COLUMN ) For Pergola
5670
1701000
300
Providing & Fixing 50 mm Dia Strut. ( Providing and fixing bolts including nuts and washers complete) (PWD 10.20)
600
52200
87
Providing & Fixing Stainless Steel Rod 50mm Dia. etc all complete of direction of engineer in charge. (DSR 4001 +10% Fixing+10% C.P.)
2250
626175
278.3
12 mm cement plaster of mix : 1:3 (1 cement: 3 coarse sand) finished with a floating coat of neat cement of mix PWD 13.9
68.91
16262
236
Providing and laying matt finished vitrified tile of size 300x300x9.8mm having with water absorption less than 0.5% and conforming to IS: 15622 of approved make in all colours and shades in for outdoor floors such as footpath, court yard, multi modals location etc., laid on 20mm thick base of cement mortar 1:4 (1 cement : 4 coarse sand) in all shapes & patterns including grouting the joints with white cement mixed with matching pigments etc. complete as per direction of Engineer-in-Charge PWD 16.69
56.25
64181
1141
Painting Steel work with Deluxe Multi Surface Paint to give an even shade. Two or more coat applied @ 0.90 ltr/10 sqm over an under coat of primer applied @ 0.80 ltr/ 10 sqm of approved brand and manufacture PWD 641+642
101.7
11390
112
French spirit polishing : Two or more coats on new works including a coat of wood filler
70.83
14378
203
Finishing walls with Premium Acrylic Smooth exterior paint with Silicone additives of required shade: New work (Two or more coats applied @ 1.43 ltr/10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/10 sqm) PWD 13.47.1
68.91
8475
123
GUARD ROOM/ CONTROL ROOM
-
-
-
Excavation in foundation in ordinary soil (loam clay or sand) including lift up to 1.5 m and lead up to 30m. And including filling watering and ramming of excavated earth into the space between the building and the sides removal and disposal of surplus earth as directed by the engineer in charge up to a distance of 30m from the doundation trenches including all T&P phowarah and basket etc. complete. : PWD 2.6.1
24.69
3975
161
Cement Concrete with 40 mm gauge approved Stone ballast ,Coarse sand and cement in proportions of 8:4:1 including supply of all materials, labours,tools & plants etc. required for poper completion of the work, Excluding GST : PWD 4.1.8
11.19
68247
6099
Providing and laying cement concrete in retaining walls, return walls, walls (any thickness) including attached pilasters, columns, piers, abutments, pillars, posts, struts, buttresses, string or lacing courses, parapets, coping, bed blocks, anchor blocks
-
-
-
Same as item no Above For lintel in 1:1.5:3 (1 cement : 1.5 Coarse sand :3 Grit) PWD 4.2.2
3.87
32538
8408
Same as item no Above For lighter beams in 1:1.5:3 (1 cement : 1.5 Coarse sand :3 Grit) PWD 4.2.2
4.5
37836
8408
Same as item no Above For slabs in 1:1.5:3 (1 cement : 1.5 Coarse sand :3 Grit) PWD 4.2.2
6.96
58519
8408
Centering and shuttering including strutting, propping etc. and removal of form for : Lintels, beams, plinth beams, girders, bressumers and cantilevers PWD 5.9.5
85.59
25762
301
Centering and shuttering including strutting, propping etc. and removal of form for Suspended floors, roofs, landings, balconies and access platform with water proof ply 12 mm thic PWD 5.9.20
58.65
27624
471
Reinforcement for RCC work including straightening, cutting, bending, placing in position complete. - Thermo-Mechanically Treated bars. L.D.A APPRO.
14.88
119040
8000
Structural steel work in single section, fixed with or without connecting plate,including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete PWD 10.1
225
15525
69
Providing and fixing M.S. grills of required pattern in frames of windows etc. with M.S. flats, square or round bars etc. including priming coat with approved steel primer all complete. Fixed to openings /wooden frames with rawl plugs screws etc A.R. DSR 9.48.2
180
22320
124
Diluting and injecting chemical emulsion for PRE-CONSTRUCTIONAL anti-termite treatment (excluding the cost of chemical emulsion) Treatment of soil under existing floors using chemical emulsion @ one litre per hole, 300 mm apart including drilling 12 mm diameter holes and plugging with cement mortar 1 :2 (1 cement : 2 Coarse sand) to match the existing floor: With Chlorpyriphos/Lindane E.C. 20% with 1% concentration PWD 2.35.3
47.04
10254
218
Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in foundation and plinth in: Cement mortar 1:6 (1 cement : 6 coarse sand) PWD 6.1.2
14.28
93091
6519
Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in superstructure above plinth level up to floor V level in all shapes and sizes in : Cement mortar 1:6 (1 cement : 6 coarse sand) PWD 6.4.2
26.58
193316
7273
Half brick masonry with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in foundations and plinth in : Cement mortar 1:3 (1 cement : 3 coarse sand) PWD 6.12.1
35.46
28793
812
Providing and laying damp-proof course 40mm thick with cement concrete 1:2:4 (1 cement : 2 coarse sand (zone-III): 4 graded stone aggregate 12.5mm nominal size) PWD 4.10
10.59
3399
321
Providing & applying a coat of residual petroleum bitumen of grade of VG-10 of approved quality using 1.7kg per square metre on damp proof course after cleaning the surface with brushes and finally with apiece of cloth lightly soaked in kerosene oil. PWD 4.13
10.59
910
86
Providing and fixing panelled and glazed shutters for doors, windows and clerestory windows, including ISI marked M.S. pressed butt hinges bright finished of required size with necessary screws, excluding panelling which will be paid for separately, all complete as per direction of Engineer-in-charge. Second class teak wood - 35 mm thick shutters. PWD 9.5.1.1
5.67
15989
2820
Providing wood work in frames of doors, windows, clerestory windows and other frames, wrought framed and fixed in position with hold fast lugs or with dash fasteners of required dia & length ( hold fast lugs or dash fastener shall be paid for separately). Second class Teak wood PWD 9.1.1
0.15
16550
110338
Providing & fixing glass panes with putty and glazing clips in steel / Wooden doors, windows, clerestory windows, all complete with : 5 mm thick glass panes PWD 10.30.2
7.92
7159
904
Providing and fixing ISI marked M.S. pressed butt hinges bright finished with necessary screws etc. complete :125x65x2.12 mm (PWD 9.55.1)
3
99
33
Providing and fixing ISI marked oxidised M.S. tower bolt black finish, (Barrel type) with necessary screws etc. complete 200x10 mm (PWD 9.63.2)
3
180
60
Providing and fixing ISI marked oxidised M.S. handles conforming to IS:4992 with necessary screws etc. complete 100 mm (PWD 9.66.2)
6
132
22
Providing and fixing Aluminium door stopper with necessary screws, etc. complete.
3
151
50.5
12 mm cement plaster of mix :1:6 (1 cement: 6 coarse sand) PWD 13.4.2
164.04
28707
175
12 mm cement plaster of mix :1:6 (1 cement: 6 coarse sand)
165.87
29027
175
Cement plaster 1:3 (1 cement: 3 coarse sand) finished with a floating coat of neat cement. 12 mm cement plaster PWD 13.9.2
58.65
13841
236
Add for plaster drip course/groove in plaster the all or in ceiling vertically or horizontally as required.
47.55
1426
30
Cement concrete flooring 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate) finished with a floating coat of neat cement, including cement slurry, but excluding the cost of nosing of steps etc. complete. 40 mm thick with 20 mm nominal size stone aggregate: PWD 11.3.1
47.52
20196
425
Providing and fixing 18 mm thick gang saw cut, mirror polished, premoulded and prepolished, machine cut for kitchen platforms, vanity counters, window sills , facias and similar locations of required size, approved shade, colour and texture laid over 20 mm thick base cement mortar 1:4 (1 cement : 4 coarse sand), joints treated with white cement, mixed with matching pigment, epoxy touch ups, including rubbing, curing, moulding and polishing to edges to give high gloss finish etc. complete at all levels. Granite of any colour and shade Area of slab over 0.50 sqm PWD 8.2.2.2
32.52
153949
4734
Finishing walls with textured exterior paint of required shade : New work (Two or more coats applied @ 3.28 ltr/10 sqm) over and including priming coat of exterior primer applied @ 2.20kg/10 sqm
164.04
28378
173
Painting Steel work with Deluxe Multi Surface Paint to give an even shade. Two or more coat applied @ 0.90 ltr/ 10 sqm over an under coat of primer applied @ 0.80 ltr/ 10 sqm of approved brand and manufacture PWD 641+642
21.39
2395
112
Wall painting with acrylic emulsion paint of approved brand and manufacture to give an even shade : Two or more coats on new work: PWD 13.60.1
238.11
25239
106
French spirit polishing: Two or more coats on works including a coat of wood filler.
11.34
2302
203
Providing and laying integral cement based water proofing treatment including preparation of surface as required for treatment of roofs, balconies, terraces etc. consisting of following operations: a) Applying a slurry coat of neat cement using 2.75 kg/sqm of cement admixed with water proofing compound conforming to IS. 2645 and approved by Engineer-in-charge over the RCC slab including adjoining walls upto 300 mm height including cleaning the surface before treatment. b) Laying brick bats with mortar using broken bricks/brick bats 25 mm to 115 mm size with 50% of cement mortar 1:5 (1 cement : 5 coarse sand) admixed with water proofing compound conforming to IS : 2645 and approved by Engineer-in-charge over 20 mm thick layer of cement mortar of mix 1:5 (1 cement :5 coarse sand ) admixed with water proofing compound conforming to IS : 2645 and approved by Engineer-in-charge to required slope and treating similarly the adjoining walls upto 300 mm height including rounding of junctions of walls and slabs c) After two days of proper curing applying a second coat of cement slurry using 2.75 kg/ sqm of cement admixed with water proofing compound conforming to IS : 2645 and approved by Engineer-in-charge. d) Finishing the surface with 20 mm thick jointless cement mortar of mix 1:4 (1 cement :4 coarse sand) admixed with water proofing compound conforming to IS : 2645 and approved by Engineer-in-charge including laying glass fibre cloth of approved quality in top layer of plaster and finally finishing the surface with trowel with neat cement slurry and making pattern of 300x300 mm square 3 mm deep. e) The whole terrace so finished shall be flooded with water for a minimum period of two weeks for curing and for final test. All above operations to be done in order and as directed and specified by the Engineer-in-Charge : With average thickness of 120 mm and minimum thickness at khurra as 65 mm (D.S.R. 22.7.1)
54.18
62469
1153
ELECTRICAL INSTALLATIONS
-
-
-
WIRING POINTS
-
-
-
Wiring point for light with 1.0 sq.mm FR P.V.C. insulated multistrand single core Copper Conductor cable in heavy gauge rigid steel conduit pipe partly concealed in wall & partly laid in slab along with the reinforcement before concreting complete with 14 S.W.G copper earth continuity wire & piano type switch etc. complete in all respects. UPPWD -2018 138 (B)
30
24300
810
Same as in item no. 1 but for fan. and light duty exhaust fan 140 (B)
3
2712
904
Same as in item no. 1 but for 5 amp plug point with piano type switch & socket etc.141 (B)
6
2532
422
Add for light / fan points with modular type switches in place of piano type switches: 187 (A)
3
132
44
Add for plug point with modular switch & socket in place of piano type switch & socket 187 ©
3
249
83
Supply & fixing of power plug with 20 amp 250 volts flush type modular switch and 5 pin 20 amp 250 volts flush type universal modular socket on concealed MS box including supply of all material, labour T&P etc. required for proper completion of work 1139 (A)
3
1875
625
MAINS & SUBMAINS
-
-
-
Supply & wiring of sub main with FR P.V.C. insulated 1100 volts grade single core copper conductor cable in heavy gauge rigid steel coduit partly concealed in wall and partly laid in slab along with the reinforcement before concreting complete with one no. 14 SWG copper earth continuity wire complete in all respects.
-
-
-
2 x 4 sq. mm. In 20 mm dia conduit. : 221 (B)
75
16575
221
2 x 10 sq. mm. In 25 mm dia conduit. : 223 (B)
15
5640
376
DISTRIBUTION BOARDS & CIRCUIT BREAKERS
-
-
-
S/F of surface / flush mounting SPN Distribution board (Legrand Lexic) without MCB complete in all respects as directed at site by Engineer-in-charge. : 12 WAYS 1025A
3
5550
1850
Supply & fixing of 6/10/16/20/25/32 amp. SP MCB (10 KA) (Legrand Lexic) : 1002
15
3900
260
S/F of 40 Amp DP MCB (10 KA) (Legrand Lexic) : 1010
3
3540
1180
S/F of sheet steel enclosure for DP / TP / FP MCB with neutral link and earth terminal. 1033
3
1650
550
EARTHING
-
-
-
Supply & burrying of 600mm x 600mm x 6.0mm G.I. plate, vertically for earthing with its top at least 3 m below ground level complete 20mm dia. G.I.pipe and funnel for watering and one earthing lead of no. 8 SWG G.I. wire in 15 mm dia. GI pipe upto switch board (from apron to switch board the cost of GI pipe & GI wire will be extra) 300mm square C.I. box with hinged cover, masonary housing alternate layer of charcoal/coke and salt atleast 150mm thick alround etc. as per the direction of engineer in-charge complete in all respect . : 703
3
16140
5380
Supplying & Laying of one number 8 SWG G. I. wire in 15 mm. dia. G. I. pipe for earthing, laid in ground or in wall duly concealed including the cost of cement, sand, labour, T & P and other material required for proper completion of the work as directed at site. : 721
84
16800
200
CABLES
-
-
-
Supply and laying of ISI marked aluminium conductor PVC / XLPE insulated armoured, served, sheathed cable 1100 volts grade at 750 mm below ground level over a cushion of 75 mm thick sand around & protected with brick on sides & top on surface the cable run shall be fixed on M.S. clamps etc. of suitable size complete in all respect. The armouring of the cable shall be properly connected with the earth conductor by clamps etc. : 10 sqmm 2 core : 501
75
21900
292
Supply fixing of plam or pin type copper tin plated cable socket (lug) to the cable leads, insulating with tape and making connections etc. complete in all respects as per direction of Engineer-in-charge. : 10 sq.mm. : 504
9
180
20
Supply and fixing brass nickle plated compression glands for PVC insulated armoured, served, sheathed cable including rubber ring etc. complete in all respect. The armouring of the cable shall be properly connected with the earth conductor.: 10 sqmm 2 core : 503
6
480
80
Erection and testing of exhaust fan on the existing hole with suitable size of rag bolts nuts and washers etc complete in all respects. : 1120
3
585
195
Supply and fixing of 16 gauge MS drum duly painted including making hole in the wall for exhaust fan and finishing properly complete in all respect. : 1122
3
2430
810
Supply & fixing of recess/surface/ pendent mounting round10 to 15 watt LED Down lighter having powder coated die cast aluminium housing with heat silk, diffuser/ reflector and driver set complete in all respect. : 1402
3
4050
1350
Supply & fixing of LED tube light with batten suitable for upto 1x22 watt LED tube light fittings including tube on surface complete in all respect Cat- AAA : 1413
3
3570
1190
Supply & fixing of recess/ surface mounting round 24 watt to 32 watt LED down lighter having powder coated die cast alumnium housing with extended heat sink, diffuser / Reflector and driver set completed in all respect. 1404
3
10500
3500
Supply, laying, jointing, testing and commissioning of ISI marked (IS : 14930, part 2) H.D.P.E. (DWC) Double wall Corrugated pipe for cable laying having corrugation on outer wall and plain smooth surface at inner side including transportation upto the site, jointing, providing and fixing all fittings i.e. sockets, couplers, reducers, end caps etc including excavation in all kind of soil upto 1 meter depth of suitable width with back filling of soil into trenches to complete the works in all respects. (Make : Duraline / Jain / AKG) : 63 mm. ID / 78 mm OD AS PER MARKET RATES
43.65
3900
89.34
Supply of AC 230/250 volts, 50 HZ fresh air fans including providing nuts, bolts, mounting frame and other accessories etc. complete : (Make : Bajaj / Usha / newtek / Havells) : 300 mm sweep AS PER MARKET RATES
3
4050
1350
Supply of AC 230/250 volts, 50 HZ exhaust fans including providing nuts, bolts, mounting frame and other accessories etc. complete : (Make : Bajaj / Crompton / Havells) : 300 mm sweep 900 rpm AS PER MARKET RATES
3
5640
1880
CAFETERIA
-
-
-
Earth work in excavation by mechanical means (Hydraulic excavator)/manual means over areas (exceeding 30 cm in depth, 1.5 m in width as well as 10 sqm on plan) including getting out and disposal of excavated earth lead upto 50 m and lift upto 1.5 m, as directed by Engineer-in-charge. All kinds of soil : PWD 2.6.1
45.57
7336
161
Excavating, supplying and filling of local earth (including royalty) by mechanical transport upto a lead of 5km also including ramming and watering of the earth in layers not exceeding 20 cm in trenches, plinth, sides of foundation etc. complete. : PWD 2.25 A
3.89
400
103
Supplying and filling in plinth with sand under floors, including watering, ramming, consolidating and dressing complete. : PWD 2.27
12.04
10149
843
Diluting and injecting chemical emulsion for PRE-CONSTRUCTIONAL anti-termite treatment (excluding the cost of chemical emulsion) : Treatment of soil under existing floors using chemical emulsion @ one litre per hole, 300 mm apart including drilling 12 mm diameter holes and plugging with cement mortar 1 :2 (1 cement : 2 Coarse sand) to match the existing floor: With Chlorpyriphos/Lindane E.C. 20% with 1% concentration : PWD 2.35.3.1
81.9
17854
218
Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level : 1:4:8 (1 Cement : 4 coarse sand (zone-III) derived from natural sources : 8 graded stone aggregate 40 mm nominal size derived from natural sources) :PWD 4.1.8
11.85
72273
6099
Providing and laying in position ready mixed or site batched design mix cement concrete for reinforced cement concrete work; using coarse aggregate and fine aggregate derived from natural sources, Portland
Pozzolana / Ordinary Portland /Portland Slag cement, admixtures in recommended proportions as per IS: 9103 to accelerate / retard setting of concrete, to improve durability and workability without impairing
strength; including pumping of concrete to site of laying, curing, carriage for all leads; but excluding the cost of centering, shuttering, finishing and reinforcement as per direction of the engineer-in-charge; Concrete of M25 grade with minimum cement content of 330 kg /cum
-
-
-
All works upto plinth level : 5.33.1
7.59
74048
9756
All works above plinth level upto floor V level : 5.33.2
46.98
505880
10768
Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete. Thermo-Mechanically Treated bars of grade Fe-500D or more. PSR
73.3
586400
8000
Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in foundation and plinth in: Cement mortar 1:6 (1 cement : 6 coarse sand) : PWD 6.1.2
5.07
33051
6519
Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in superstructure above plinth level up to floor V level in all shapes and sizes in : Cement mortar 1:4 (1 cement : 4 coarse sand) : PWD 6.4.2
10.88
79130
7273
Half brick masonry with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in superstructure above plinth level up to floor V level. Cement mortar 1:3 (1 cement :3 coarse sand) : PWD 6.13.1
-
-
-
12 mm cement plaster of mix : 1:6 (1 cement: 6 coarse sand) PWD 13.4.2
329.61
57681
175
12 mm cement plaster of mix : 1:6 (1 cement: 6 coarse sand) PWD 13.5.2
150
30450
203
Providing wood work in frames of doors, windows, clerestory windows and other frames, wrought framed and fixed in position with hold fast lugs or with dash fasteners of required dia & length ( hold fast lugs or
dash fastener shall be paid for separately).Second class teak wood : PWD 9.1.1
0.2
22067
110338
Providing and fixing panelled and glazed shutters for doors, windows and clerestory windows, including ISI marked M.S. pressed butt hinges bright finished of required size with necessary screws, excluding panelling which will be paid for separately, all complete as per direction of Engineer-in-charge. Second class teak wood - 35 mm thick shutters. : PWD 9.5.1.1
2.52
7106
2820
Providing and fixing carbon steel galvanised ( minimum coating 5 micron) dash fastener of 10 mm dia double threaded 6.8 grade (yield strength 480 N/mm2), counter sunk head, comprising of 10 mm dia polyamide PA 6 grade sleeve, including drilling of hole in frame , concrete/ masonry, etc. as per direction of Engineer-in-charge. PWD 10.27
-
-
-
Frame anchor HRD-C 10x140 : 10.27.4
6
582
97
Frame anchor HRD-C 10x120 : 10.27.3
16
1392
87
Providing and fixing factory made uPVC white colour casement/casement cum fixed glazed windows comprising of uPVC multi-chambered frame, sash and mullion (where ever required) extruded profiles duly reinforced with 1.60 ± 0.2 mm thick galvanized mild steel section made from roll forming process of required length (shape & size according to uPVC profile), uPVC extruded glazing beads of appropriate dimension, EPDM. gasket, stainless steel (SS 304 grade) friction hinges, zinc alloy (white powder coated) casement handles, G.I fasteners 100 x 8 mm size for fixing frame to finished wall, plastic packers, plastic caps and necessary stainless steel screws etc. Profile of frame & sash shall be mitred cut and fusion welded at all corners, mullion (if required) shall be also fusion welded including drilling of holes for fixing hardware's and drainage of water etc.After fixing frame the gap between frame and adjacent finished wall shall be filled with weather proof silicon sealant over backer rod of required size and of approved quality, all complete as per approved drawing & direction of Engineer-in-Charge. (Single / double glass panes and silicon sealant shall be paid separately) Note: For uPVC frame, sash and mullion extruded profiles minus 5% tolerancein dimension i.e. in depth & width of profile shall be acceptable. Variation in profile dimension in higher side shall be accepted but no extra payment on this account shall be made.
-
-
-
Casement window single panel with S.S. friction hinges (400 x 19 x 1.9 mm) made of (big series)frame 67 x 60 mm & sash 67 x 80 mm both having wall thickness of 2.3 ± 0.2 mm and single glazing bead / double glazing bead of appropriate dimension. (Area of window above 0.75 sqm.)
3.78
30618
8100
Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete. : PWD 13.80
479.61
47481
99
Finishing with Deluxe Multi surface paint system for interiors and exteriors using Primer as per manufacturers specifications : Two or more coats applied on walls @ 1.25 ltr/10 sqm over and including one coat of Special primer applied @ 0.75 ltr /10 sqm :PWD 641+642
329.61
36916
112
Finishing walls with textured exterior paint of required shade : New work (Two or more coats applied @ 3.28 ltr/10 sqm) over and including priming coat of exterior primer applied @ 2.20kg/10 sqm : PWD 13.47.1
150
18450
123
Cement concrete flooring 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate) finished with a floating coat of neat cement, including cement slurry, but excluding the cost of nosing of steps etc. complete. 40 mm thick with 20 mm nominal size stone aggregate : PWD 11.3.1
36.81
15644
425
Providing and fixing 1st quality ceramic glazed floor tiles conforming to IS : 15622 (thickness to be specified by the manufacturer ) of approved make in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer-in-Charge in skirting, risers of steps and dados over 12 mm thick bed of cement Mortar 1:3 (1 cement: 3 coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm including pointing in white cement mixed with pigment of matching shade complete. PWD 11.37A
-
-
-
Providing and fixing Ist quality ceramic glazed wall tiles conforming to IS: 15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer-in-Charge, in skirting, risers of steps and dados, over 12 mm thick bed of cement mortar 1:3 (1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm, including pointing in white cement mixed with pigment of matching shade complete. : PWD 8.31
29.51
26411
895
Kota stone slab flooring over 20 mm (average) thick base laid over and jointed with grey cement slurry mixed with pigment to match the shade of the slab, including rubbing and polishing complete with base of cement mortar 1 : 4 (1 cement : 4 coarse sand) : 25 mm thick : PWD 11.26.1
4.8
7814
1628
Kota stone slabs 25 mm thick in risers of steps, skirting, dado and pillars laid on 12 mm (average) thick cement mortar 1:3 (1 cement: 3 coarse sand) and jointed with grey cement slurry mixed with pigment to match the shade of the slabs, including rubbing and polishing complete. :PWD 11.26.1
0.93
1514
1628
Providing and fixing 18 mm thick gang saw cut, mirror polished, premoulded and prepolished, machine cut for kitchen platforms, vanity counters, window sills, facias and similar locations of required size,
approved shade, colour and texture laid over 20 mm thick base cement mortar 1:4 (1 cement : 4 coarse sand), joints treated with white cement, mixed with matching pigment, epoxy touch ups, including rubbing, curing,
moulding and polishing to edges to give high gloss finish etc. complete at all levels. Granite of any colour and shade Area of slab over 0.50 sqm : PWD 8.2.2.2
126.77
600129
4734
Providing and laying in situ five course water proofing treatment with APP (Atactic Polypropylene) modified Polymeric memberane over roof consisting of first coat of bitumen primer @ 0.40 litre per sqm, 2nd & 4th courses of bonding material @ 1.20 kg/sqm, which shall
consist of blown type bitumen of grade 85/25 conforming to IS : 702, 3rd layer of roofing membrane APP modified Polymeric membrane 2.0 mm thick of 3.00 Kg/ sqm weight consisting of five layers prefabricated with centre core as 100 micron HMHDPE film sandwiched on both sides with polymeric mix and the polymeric mix
is protected on both side with 20 micron HMHDPE film. 5th, the top most layer shall be finished with brick tiles of class designation 10 grouted with cement mortar 1:3 (1 cement : 3 fine sand) mixed with 2% integral water proofing compound by weight of cement over a 12
mm layer of cement mortar 1:3 (1 cement : 3 fine sand) and finished neat (item of laying brick tiles shall be paid for separately). DSR 14.87
139.43
46373
332.59
Providing and fixing ISI marked M.S. pressed butt hinges bright finished with necessary screws etc. complete :125x65x2.12 mm : PWD 9.55.1
1
33
33
Providing and fixing ISI marked oxidised M.S. tower bolt black finish, (Barrel type) with necessary screws etc. complete PWD 9.63
-
-
-
(a) 250 mm x 10mm PWD 9.63.1
1
68
68
(a) 200 mm x 10mm PWD 9.63.2
1
60
60
Providing and fixing ISI marked oxidised M.S. handles conforming to IS:4992 with necessary screws etc. complete 100 mm PWD 9.66.2
2
44
22
Providing and fixing Aluminium door stopper with necessary screws, etc. complete. A.R.
1
50
50.5
Providing centering & shuttering including strutting, propping etc. & removal of form including all materials, labour and T & P etc. required for proper completion of work all complete PWD 5.9
-
-
-
Foundations, footings, bases of columns, etc. for mass concrete 5.9.1
15.49
2617
169
Columns, Pillars, Piers, Abutments, Posts and Struts 5.9.6
49.46
19289
390
Lintels, beams, plinth beams, girders, bressumers and cantilevers : 5.9.5
119.3
35909
301
Suspended floors, roofs, landings, balconies and access platform 5.9.3
162.41
59766
368
Supplying & Intallation of Tensile fabric canopy make serge ferrari/ mehlar including all necessary T&P etc all complete in direction of engineer in charge.
25
337500
13500
Providing and laying pressed clay tiles (as per approved pattern 20 mm nominal thickness of approved size) on roofs jointed with cement mortar 1:4 (1 cement : 4 coarse sand) mixed with 2% integral water proofing compound, laid over a bed of 20 mm thick cement mortar 1:4 (1 cement : 4 coarse sand) and finished neat complete. DSR 12.20
139.43
57394
411.64
French spirit polishing : Two or more coats on new works including a coat of wood filler
21
4263
203
ELECTRICAL WORKS
-
-
-
Wiring points for light with 1 sqmm.FR PVC insulated multistrand single core copper condutor cable in PVC conduit pipe partly concealed in the wall and partly laid in slab along with the reinforcement before concreting, complete with 1.5 sq. mm. FR PVC insulated multistrand copper earth contunity wire,piano type switch & ceiling rose/angle/batten holder on 3mm thick phenolic paminated backalite sheet etc.complete in all respects.as directed including matching colour wash. 138(C)
35
21350
610
Wiring points for Fan /Fresh air fan (light duty exhaust fan )with 1 sqmm.FR PVC insulated multistrand single core copper condutor cable in PVC conduit pipe partly concealed in the wall and partly laid in slab along with the reinforcement before concreting, complete with 1.5 sq. mm. FR PVC insulated multistrand copper earth contunity wire,piano type switch & ceiling rose on 3mm thick phenolic paminated backalite sheet etc.complete in all respects.as directed including matching colour wash. 140©
11
7381
671
Wiring points for Plug with 1 sqmm.FR PVC insulated multistrand single core copper condutor cable in PVC conduit pipe partly concealed in the wall and partly laid in slab along with the reinforcement before concreting, complete with 1.5 sq. mm. FR PVC insulated multistrand copper earth contunity wire,piano type switch & socket sheet etc.complete in all respects.as directed including matching colour wash. 141(C)
20
6540
327
Wiring points for Call bell with 1 sqmm.FR PVC insulated multistrand single core copper condutor cable in PVC conduit pipe partly concealed in the wall and partly laid in slab along with the reinforcement before concreting, complete with 1.5 sq. mm. FR PVC insulated multistrand copper earth contunity wire,piano type bell push or 2pin socket etc.complete in all respects.as directed including matching colour wash. 142(C)
1
572
572
Supply & fixing of buzzer on polished MDFEG/Teak ply board including making connections etc. complete in all respect. 1103
1
140
140
Supply & wiring of submains with 2 nos. 2.5 sq.mm & with 1 no. earth wire of 1.5 sq.mm FR PVC insulated 1100 V grade single core multistrand copper conductor cable in PVC conduit pipe partly concealed including supply of all material, labourand T&P etc. required for proper completion of the work as directed by Engineer I/C. 1307(C)
60
7260
121
Supply and wiring of submain with two number 4 sqmm . FR PVC insulated 1100 V grade multistranded single core copper conductor cable in 20mm dia heavy duty (2mm thick ) PVC conduit partly concealed in wall and partly laid in slab along with reinforcement befor concreting with one number 2.5 Sqmm FR PVC Multistand copper earth contunity wire including colour wash etc. complete in all respects. 221(C)
75
11175
149
Supply and wiring of submain 2 number 6 sqmm . FR PVC insulated 1100 V grade multistranded single core copper conductor cable in 20mm dia heavy duty (2mm thick ) PVC conduit partly concealed in wall and partly laid in slab along with reinforcement befor concreting with one number 4.0 Sqmm FR PVC Multistand copper earth contunity wire including colour wash etc. complete in all respects. 222(C)
85
17340
204
S/F of hexagonal fan box with hexagonal side of approx 80mm in length fabricated from 16SWG MS. Sheet incorporating 10mm dia, M.S. round bar duly bent for supporting fan hanger dully painted with red oxide and screwing arrangement with wiring conduit laid in the R.C.C roof before concreting along with supply of all materials,labour. T& Petc. required for proper completion of the work. 1149
9
1350
150
Supply and fixing of flush/surface mounting distribution boards with additional metal door without MCB complete in all respects. 6 Way TPN 1027(A)
1
4370
4370
Supply and fixing of 6 Amp to 32 Amp MCB(10KA)C Curve : 6 - 32 amps.Cat. A 1002
1
260
260
Supply and fixing of 40/63 Amp MCB(10KA)C Curve : 63 Amp. 4 Pole MCB C Curve-Cat. A 1020(A)
2
4580
2290
Supply and fixing of power plug with 15 Amp./250 Volt flush type universal switch and 5 pin 15 A/250 V flush type universal socket switch on concealed M.S. box including supply of all material, labour T&P etc. required for proper completion of work. 1139
3
1020
340
Supply and fixing of power plug with 20 Amp./250 Volt flush type universal switch and 5 pin 20 A/250 V flush type universal socket switch on concealed M.S. box including supply of all material, labour T&P etc. required for proper completion of work.1139(A)
4
2500
625
Supply & fixing of single wall bracket on matching M.D.F.E.G. board base etc. complete in all required. Cat. AA 412
5
8250
1650
Supply and Fixing of LED Tube Light with batten suitable for up to 1X22 watt LED tube light complete including tube etc. on surface complete in all respect. : 1 X 22 W: CAT-AAA (1413)
2
2380
1190
Supply and Fixing of LED Tube Light with batten suitable for up to 1X22 watt LED tube light complete including tube etc. on surface complete in all respect.: 2 X 22 W: CAT-AAA (1414)
1
1790
1790
Supply and fixing of recess/ Surface/ Pendent mounting round 10 to 15 Watt LED Down Lighter having Powder coated die cast aluminium housing with heat sink, diffuser/ Reflector and driver set complete in all respect .(Category AAA ) UP SOR-1402
6
8100
1350
Supply and fixing of recess mounting round 15 to 18 Watt LED Down Lighter having Powder coated die cast aluminium housing with heat sink, diffuser/ Reflector and driver set complete in all respect. UP SOR-1403
22
41140
1870
Supply & fixing of water tight oblong 10 watt LED bulkhead luminaire with driver set confirming to IP 65 and above protection complete in all respect. UP SOR-1417
2
2800
1400
Supply of Ceilling Fans with fan motor of A.C. Permanent insulation, capacitor rating conforming BEE 5 star rating and IS: 374/79 abd also comply with IS: 1709/1984 with latest amendment. The rate voltage 220/240 volts, 50Hz, 1-ph AC the fan assemble should consist of down rod blades, shackle canopies etc and with double ball bearing system. 1501
9
16200
1800
Supply fixing of electronic fan regulator (Modular) 120-280 V. ISI marked, on the existing switch board including making connetion, required material, labour T/P etc for proper completion of work to the satisfaction of Engineer in charge of work. 1203(C)
9
4653
517
Supply & erection ofA.C 230/250 Volts,50 Hz exhaust fans including providing m.S bolts,mounting frame and other acessories including connections etc.complete as required 300mm sweep as per directionof E/I Makebajaj,Cromption or Equivalent.
1
1880
1880
Supply & fixing of Sheet Steel Enclosure Surface/ Flush Mounting fitted With 20/32 Amp. 2Pin and earth metal clad scraping earth plug and socket complete in all respects as per direction and satisfaction of engineer-in-charge.-Cat. A (1031)
4
6480
1620
Supply and fixing of 63 A 415 V metal clad TPN CFS complete with HRC fuse etc. on angle iron frame complete in all respect . :353
2
11560
5780
Supply and burying of 600mm x 600 mmx6mm G.I. plate, vertically for earthing with its top atleast 3 mts. below ground level complete with 20mm G.I.pipe and funnel for watering and two earthing leads of No.8to10SWG G.I.wire in 15mm diaG.I. pipe upto switch board (from apron to switch board the cost of G.I. pipe and G.I. wire will be extra) 30cm. square C.I. frame with hinged cover, masonary housing, alternate layers/of charcoal/ coke and salt at least 150mm thick alround etc. complete in all respects. : 703
1
5380
5380
Supply & fixing of two number 8 SWG G.I. wire for earthing purpose as required complete in all respects. : 723
20
4200
210
Supply, installation, testing and commissioning of electrical pane, modular type, front accessible only, free floor standing confirming to Minimum IP:43 degree of protection. The panel sheet structure shall undergo seven tank pre-treatment process before painting. The sheet steel shall be all of 2.2mm thick CRCA sheet. All the openable compartments of the panel shall be completely shrouded and provided with padlocking arrangement on all compartments including bus bar and cable alley chambers. The panel height shall not exceed 2200mm and the maximum operating height for any switchgear shall not be more than 1700mm. The panel shall be provided with minimum 75mm base channel frame fabricated from ISMC sections. All bus bar links in the panel shall be solid bus bars with coloured PVC shrinkable sleeves, no wires will be acceptable. Continuous earth bus shall run alround the panel with earthing studs provided at minimum 2 places. The control wiring shall be carried out with minimum 1.5/2.5 sqmm copper wires and
-
-
-
adequate number of NO/NC, potential free contacts incorporated for remote operation of the starters. Proper sized cable termination gland plates shall be provided on cable alleys and knockouts for same shall be provided during fabrication stage itself. The panel shall be provided with a thermostatically controlled heating arrangement (200 W) to take care of high humidity conditions. A 5A socket service outlet (single phase) shall be provided in one of the compartments as ervice outlet in the panel. Panel shall be so designed at to have minimum 20% spare feeders/space. Panel shall undergo epoxy powder coated paint, colour as per IS:5 requirement. All cable terminations shall be from top. The complete panel shall be fuse less type, for control circuits 2A/6A MCB's to be used.
-
-
-
All bus bars shall be of aluminium, electrolytic grade only. Maximum design density shall not exceed 1 Amps/Sqmm. All bus bars shall be insulated with coloured heat shrinkable PVC sleeved. All bus bar supports shall be non hygroscopic DMC/SMC supports.
The panel shall be manufactured in conformance to requirements of local electrical inspector and it shall be contractors responsibility to get initial approval of drawings and also final approval of complete electrical works related to this section.
The minimum clearances between bus bars shall be as follows :
Phase to phase - minimum 20mm
Phase to neutral-minimum 15mm
63 AMP TNP-2 NOS. : OR outgoing as per site requirment. (801)
1
58260
58260
PLUMBING WORKS
-
-
-
SANITARY FIXTURES & ACCESSORIES
-
-
-
Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass pillar taps, 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever require
-
-
-
a) White Vitreous China Flat back wash basin size 550x 400 mm with single 15 mm C.P. brass pillar tappillar tap. PWD 17.7.4
10
24860
2486
Providing and fixing flexible P.V.C. waste pipe for sink or wash basin including PVC waste fittings complete. 32 mm dia (for wash basin)PWD 17.28.1.1
10
1100
110
Providing & Fixing 600 X 450 mm bevelled edge mirror of superior glass (of approved quality) complete with 6mm thick hard board ground fixed to wooden cleats with C.P. brass screws and washers complete.
10
10560
1056
WATER SUPPLY PIPES AND FITTINGS
-
-
-
Providing, fixing chlorinated polyvinyl Chloride (CPVC) pipes, having thermal stability for hot and cold water supply including all CPVC plain and brass threaded fittings including fixing the pipes with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer in charge.
-
-
-
Internal work exposed on wall
-
-
-
40mm nominal outer dia pipes (18.7.5)
25
10550
422
50mm nominal outer dia pipes (18.7.6)
20
16068
803.43
Providing, fixing chlorinated polyvinyl Chloride (CPVC) pipes, having thermal stability for hot and cold water supply including all CPVC plain and brass threaded fittings including fixing the pipes with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer in charge. Concealed work including cutting chase and making good the wall etc.
-
-
-
15mm nominal outer dia pipes. (18.8.1)
40
11360
284
20mm nominal outer dia pipes (18.8.2)
20
6380
319
25mm nominal outer dia pipes (18.8.3)
15
5640
376
32mm nominal outer dia pipes (18.8.4)
10
4770
477
Providing & fixing gun metal gate valve with C.I. wheel of approved quality (screwed end) : 40 mm nominal bore (18.17.3)
10
14480
1448
Providing & fixing gun metal gate valve with C.I. wheel of approved quality (screwed end) : 50 mm nominal bore. (18.17.4)
2
1522
761.18
Providing & fixing 15 mm nominal bore 45 cm long unplasticised PVC connection pipe with brass unions.
15
1107
73.84
Providing & fixing 15 mm nominal bore CP brass bib cock of approved quality conforming to IS 8931.
7
4109
587
Providing and fixing 15 mm nominal bore C.P brass long nose bib cock of approved quality conforming to IS standards and weighing not less than 810 gms. PWD 18.50.1
8
5176
647
Providing & fixing 15 mm nominal bore C.P. brass stop cock (concealed) of standard design and of approved make conforming to IS : 8931. PWD 18.52.1
8
5088
636
Providing & fixing 15 mm nominal bore C.P brass angle valve for basin mixer and geyser points of approved quality conforming to IS 8931. PWD 18.53.1
15
8625
575
Constructing brick masonry chamber 300 x 300 x 500 mm, inside with F.P.S. brick work in cement mortar 1: 4 (1 cement : 4 coarse sand) for Stop Cock, with C. I. surface box 100 x 100 x 75 mm (inside) with hinged cover fixed in cement concrete slab 1:2:4mix (1cement : 2 coarse sand:4 grade stone aggregate 20mm nominal size); necessary excavation, foundation concrete 1:5:10 (1 cement :5 fine sand: 10 graded stone aggregate 40mm nominal size) and inside plastering with cement mortar 1 : 3 (1 cement : 3 coarse sand ) 12 mm thick finished with a floating coat of neat cement complete as per standard design 18.32.1
10
13820
1382
Providing and fixing square mouth S. W. Gully trap grade `A' complete with C.I. grating brick masonry chamber with F.P.S bricks and water tight CI cover with frame of 300 x 300 mm size (inside) the weight of cover to be not less than 4.50 kg and frame to be not less than 2.70 kg as per standard design
-
-
-
150 x 100 mm. size P type
22
51546
2343
Providing and fixing PTMT towel ring trapezoidal shape 215 mm long, 200 mm wide with minimum distances of 37 mm from wall face with concealed fittings arrangement of approved quality and colour, weighing not less than 88 gms.
4.19
710
169.5
Providing and placing on terrace (at all floor levels) polyethylene water storage tank, IS : 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank.
1000
11000
11
Providing, fixing, jointing and testing in position of ISI marked UV stabilized UPVC pipes for soil, waste, and vent, Type-B as per IS : 13592 suitable for rubber ring joints, including all neccessary specials and fittings (confirming to IS:14735) i.e. bends, tees, junctions (with or without doors), reducers, WC connectors, couplers, expansion joints / bellows, cowels, clamps, rubber rings, clean outs etc. fixing at wall/ ceiling/ floor level supported by clamp & hangers etc. in concealed / inside duct / under floor & basement ceiling / external work etc. including chase cutting as required, excavation and back filling in all kind of soils, suspended from floor under false ceiling or embedding the pipes laid under floors / building in 75 mm. alround 1:2:4 cement concrete (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) including cost of shuttering for proper completion of the work, breaking and making good the walls and floors etc. after pipes have been duly laid and tested. The rubber ring shall confirm to IS:5382. (Make : Supreme / Finolex / Prince)
-
-
-
110 mm dia (Wall Thickness - 3.2 to 3.8 mm)
10.08
4435
440
75 mm dia (Wall Thickness - 3.2 to 3.8 mm)
15
4725
315
Providing, fixing, jointing and testing in position ISI marked (IS:4985) UPVC pipes of min 6 Kg/ Sqcm rating with fitting for waste pipe from fixtures to floor trap including reduces, enlarger, socket, couplers, bends, tees etc including fixing at wall/ ceiling level supported by clamp & hangers etc. cutting holes in wall/ floors/ slabs and making good the same with cement concrete 1:2:4 complete as required. (Make : Supreme / Finolex / Prince) : 50 mm dia.
10
1050
105
Providing & fixing UPVC Floor trap of self cleansing design with CP Jali complete in all respects. (Make : Supreme / Finolex / Prince) : P-Trap type Floor Trap 110 x 75 mm
20
9200
460
Extra for providing & fixing 125 mm dia C.P. grating in place of C.I. grating over floor traps.
7
560
80
Providing & fixing 50 mm. dia. G.I elbow (drain point) in the toilet floor including 50 mm dia. C.P. waste jali complete as required.
5
1425
285
KIDS PLAY APPARATUS
-
-
-
Supplying and Fixing of Four Seater Swing with sparrow outdoor playing equipment including necessary fittings, T&P etc all complete in direction of engineer in charge. (Make Arihant / Funplay/ Compain) FPSW 10
1
55810
55810
Supplying and Fixing of Standered Multi seater See Saw outdoor playing equipment including necessary fittings, T&P etc all complete in direction of engineer in charge. (Make Arihant / Funplay/ Compain) FPSS12
1
17578
17578
Supplying and Fixing of Turbo Tower outdoor playing equipment including necessary fittings, T&P etc all complete in direction of engineer in charge. (Make Arihant / Funplay/ Compain) FPCL35
1
43945
43945
Supplying and Fixing of Monkey Climber outdoor playing equipment including necessary fittings, T&P etc all complete in direction of engineer in charge. (Make Arihant / Funplay/ Compain) FPCL43
1
49438
49438
Supplying and Fixing of Balancing Bridge outdoor playing equipment including necessary fittings, T&P etc all complete in direction of engineer in charge. (Make Arihant / Funplay/ Compain)(Make Arihant / Funplay/ Compain) FPTH41
1
64270
64270
Supplying and Fixing of Four Seater Merry Go Round outdoor playing equipment including necessary fittings, T&P etc all complete in direction of engineer in charge. (Make Arihant / Funplay/ Compain) FPMR11
1
50756
50756
Supplying and Fixing of 7' Ht. FRP Wave Slide outdoor playing equipment including necessary fittings, T&P etc all complete in direction of engineer in charge. (Make Arihant / Funplay/ Compain) FPSD51
1
71960
71960
Supplying and Fixing of Frog Bin - FRP outdoor playing equipment including necessary fittings, T&P etc all complete in direction of engineer in charge. (Make Arihant / Funplay/ Compain) FPDB11
3
44493
14831
Supplying and Fixing of Duplex Multi Play Fun System - 06 outdoor playing equipment including necessary fittings, T&P etc all complete in direction of engineer in charge. (Make Arihant / Funplay/ Compain) FPDB11
1
1025017
1025017
Supplying and Fixing of Imperial Bench 4' outdoor playing equipment including necessary fittings, T&P etc all complete in direction of engineer in charge. (Make Arihant / Funplay/ Compain) FPGD11
3
59985
19995
TOILET BLOCK
-
-
-
Earth work in exacavation in trenches for foundations and for pipes cables etc. in ordinary soil mixed moorum, shingle, kanker(loam clay or sand) including lift upto 1.5 m and dressing of sides and ramming of bottom sand disposal of surplus excavated earth as directed by the Engineer i/c with in a lead of 50m. PWD 2.6.1
44.06
7093
161
Providing and laying in position cement concrete of specified grade excluding the cost of centring and shuttering-all work up to plinth level. 1:4:8 (1 Cement :4 coarse sand :8 graded stone aggregate 40 mm nominal size) (PWD 4.1.8)
10.66
65015
6099
Providing and laying cement concrete in retaining walls, return walls, walls (any thickness) including attached pilasters, columns, piers, abutments, pillars, posts, struts, buttresses, string or lacing courses, parapets, coping, bed blocks, anchor blocks 1:1.5:3 (1 cement : 1.5 Coarse sand :3 Grit) PWD 4.2.2
16.39
137807
8408
Centering and shuttering including strutting, propping etc. and removal of form for : Lintels, beams, plinth beams, girders, bressumers and cantilevers : PWD 5.9.5
52.34
15754
301
Centering and shuttering including strutting, propping etc. and removal of form for Foundations, footings, bases of columns, etc. for mass concrete : PWD 5.9.1
18.18
3072
169
Centering and shuttering including strutting, propping etc. and removal of form for : Columns, Pillars, Piers, Abutments, Posts and Struts : PWD 5.9.6
24.84
9687
390
Centering and shuttering including strutting, propping etc. and removal of form for Suspended floors, roofs, landings, balconies and access platform with water proof ply 12 mm thick : PWD 5.9.20
42.49
20012
471
Diluting and injecting chemical emulsion for PRE-CONSTRUCTIONAL anti-termite treatment (excluding the cost of chemical emulsion) Treatment of soil under existing floors using chemical emulsion @ one litre per hole, 300 mm apart including drilling 12 mm diameter holes and plugging with cement mortar 1 :2 (1 cement : 2 Coarse sand) to match the existing floor: With Chlorpyriphos/Lindane E.C. 20% with 1% concentration : PWD 2.35.3)
50.42
10991
218
Reinforcement for RCC work including straightening, cutting, bending, placing in position complete. - Thermo-Mechanically Treated bars. PSR
16.74
133920
8000
Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in foundation and plinth in: Cement mortar 1:6 (1 cement : 6 coarse sand): PWD 6.1.2
11.07
72165
6519
Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in superstructure above plinth level up to floor V level in all shapes and sizes in : Cement mortar 1:6 (1 cement : 6 coarse sand) :.(PWD 6.4.2 )
14.46
105167
7273
Half brick masonry with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in foundations and plinth in :
Cement mortar 1:3 (1 cement : 3 coarse sand) (PWD 6.12.1 )
23.14
18789
812
Providing and laying damp-proof course 40mm thick with cement concrete 1:2:4 (1 cement : 2 coarse sand (zone-III): 4 graded stone aggregate 12.5mm nominal size) : (PWD 4.10)
8.17
2622
321
Providing & applying a coat of residual petroleum bitumen of grade of VG-10 of approved quality using 1.7kg per square metre on damp proof course after cleaning the surface with brushes and finally with apiece of cloth lightly soaked in kerosene oil. : PWD 4.13
8.17
702
86
Providing wood work in frames of doors, windows, clerestory windows and other frames, wrought framed and fixed in position with hold fast lugs or with dash fasteners of required dia & length ( hold fast lugs or dash fastener shall be paid for separately). Second class Teak wood : (PWD 9.1.1)
0.1
11033
110338
Providing and fixing panelled and glazed shutters for doors, windows and clerestory windows, including ISI marked M.S. pressed butt hinges bright finished of required size with necessary screws, excluding panelling which will be paid for separately, all complete as per direction of Engineer-in-charge. Second class teak wood - 35 mm thick shutters.: (PWD 9.5.1.1 )
3.78
10659
2820
Providing & fixing glass panes with putty and glazing clips in steel / Wooden doors, windows, clerestory windows, all complete with : 5 mm thick glass panes: (PWD 10.30.2)
3.84
3471
904
Providing and fixing ISI marked M.S. pressed butt hinges bright finished with necessary screws etc. complete :125x65x2.12 mm :: (PWD 9.55.1)
8
264
33
Providing and fixing ISI marked oxidised M.S. tower bolt black finish, (Barrel type) with necessary screws etc. complete 200x10 mm : (PWD 9.63.2)
8
480
60
Providing and fixing ISI marked oxidised M.S. handles conforming to IS:4992 with necessary screws etc. complete 100 mm (PWD 9.66.2)
16
352
22
Providing and fixing Aluminium door stopper with necessary screws, etc. complete. (A.R.)
8
404
50.5
12 mm cement plaster of mix :1:6 (1 cement: 6 coarse sand) : PWD 13.4.2
255.12
44646
175
Cement plaster 1:3 (1 cement: 3 coarse sand) finished with a floating coat of neat cement. 12 mm cement plaster (PWD 13.9.1)
42.49
10027
236
Add for plaster Making grooves in Inner plastered surface. (A.R. DSR 5.30)
62.49
1874
30
Add for plaster drip course in moulding to R.C.C. projections. PWD 598 /2017
31.52
851
27
Cement concrete flooring 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate) finished with a floating coat of neat cement, including cement slurry, but excluding the cost of nosing of steps etc. complete. 40 mm thick with 20 mm nominal size stone aggregate (PWD 11.3.1)
27.3
11602
425
Providing and laying Ceramic glazed floor tiles of size 600x600 mm (thickness to be specified by the manufacturer), of 1st quality conforming to IS : 15622, of approved make, in all colours, shades, except White, Ivory, Grey, Fume Red Brown, laid on 20 mm thick bed of cement mortar 1:4 (1 Cement : 4 Coarse sand), jointing with grey cement slurry @ 3.3 kg/ sq.m including pointing the joints with white cement and matching pigments etc., complete. (PWD 11.38)
33.8
35828
1060
Providing and fixing 1st quality ceramic glazed Wall tiles conforming to IS : 15622 (thickness to be specified by the manufacturer ) of approved make in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer-in-Charge in skirting, risers of steps and dados over 12 mm thick bed of cement Mortar 1:3 (1 cement: 3 coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm including pointing in white cement mixed with pigment of matching shade complete. (PWD 8.31)
143.86
128754
895
French spirit polishing : Two or more coats on new works including a coat of wood filler : DSR 13.68
13.56
2752
203
Wall painting with acrylic emulsion paint of approved brand and manufacture to give an even shade : Two or more coats on new work (DSR 13.60.1)
297.61
31546
106
Finishing walls with textured exterior paint of required shade : New work (Two or more coats applied @ 3.28 ltr/10 sqm) over and including priming coat of exterior primer applied @ 2.20kg/10 sqm A.R
92.22
11343
123
Providing and laying integral cement based water proofing treatment including preparation of surface as required for treatment of roofs, balconies, terraces etc consisting of following operations: a) Applying a slurry coat of neat cement using 2.75 kg/sqm of cement admixed with water proofing compound conforming to IS. 2645 and approved by Engineer-in-charge over the RCC slab including adjoining walls upto 300 mm height including cleaning the surface before treatment. b) Laying brick bats with mortar using broken bricks/brick bats 25 mm to 115 mm size with 50% of cement mortar 1:5 (1 cement : 5 coarse sand) admixed with water proofing compound conforming to IS : 2645 and approved by Engineer-in-charge over 20 mm thick layer of cement mortar of mix 1:5 (1 cement :5 coarse sand ) admixed with water proofing compound conforming to IS : 2645 and approved by Engineer-in-charge to required slope and treating similarly the adjoining walls upto 300 mm height including rounding of junctions of walls and slabs two days of
-
-
-
c) After proper curing applying a second coat of cement slurry using 2.75 kg/ sqm of cement admixed jointless cement mortar of mix 1:4 (1 cement :4 coarse sand) admixed with water proofing compound conforming to IS : 2645 and approved by Engineer-in-charge including laying glass fibre cloth of approved quality in top layer of plaster and finally finishing the surface with trowel with neat cement slurry and making pattern of 300x300 mm square 3 mm deep. e) The whole terrace so finished shall be flooded with water for
a minimum period of two weeks for curing and for final test. All above operations to be done in order and as directed and specified by the Engineerin- Charge : With average thickness of 120 mm and minimum thickness at khurra as 65 mm. (DSR 22.7.1)
42.49
48990
1153
Providing and fixing factory made uPVC white colour casement/casement cum fixed glazed windows comprising of uPVC multi-chambered frame, sash and mullion (where ever required) extruded profiles duly reinforced with 1.60 ± 0.2 mm thick galvanized mild steel section made from roll forming process of required length (shape & size according to uPVC profile), uPVC extruded glazing beads of appropriate dimension, EPDM. gasket, stainless steel (SS 304 grade) friction hinges, zinc alloy (white powder coated) casement handles, G.I fasteners 100 x 8 mm size for fixing frame to finished wall, plastic packers, plastic caps and necessary stainless steel screws etc. Profile of frame & sash shall be mitred cut and fusion welded at all corners, mullion (if required) shall be also fusion welded including drilling of holes for fixing hardware's and drainage of water etc.After fixing frame the gap between frame and adjacent finished wall shall be filled with weather proof silicon sealant over backer rod of required size and of approved quality, all complete as per approved drawing & direction of Engineer-in-Charge. (Single / double glass panes and silicon sealant shall be paid separately) Note: For uPVC frame, sash and mullion extruded profiles minus 5% tolerancein dimension i.e. in depth & width of profile shall be acceptable. Variation in profile dimension in higher side shall be accepted but no extra payment on this account shall be made.
-
-
-
Casement window single panel with S.S. friction hinges (400 x 19 x 1.9 mm) made of (big series)frame 67 x 60 mm & sash 67 x 80 mm both having wall thickness of 2.3 ± 0.2 mm and single glazing bead / double glazing bead of appropriate dimension. (Area of window above 0.75 sqm.) (PWD 9.147.A.4 )
3.84
31104
8100
ELECTRICAL INSTALLATIONS
-
-
-
WIRING POINTS
-
-
-
Wiring point for light with 1.0 sq.mm FR P.V.C. insulated multistrand single core Copper Conductor cable in heavy gauge rigid steel conduit pipe partly concealed in wall & partly laid in slab along with the reinforcement before concreting complete with 14 S.W.G copper earth continuity wire & piano type switch etc. complete in all respects. 138 (B)
30
24300
810
Same as in item no. 1 but for fan. and light duty exhaust fan 140 (B)
2
1808
904
Same as in item no. 1 but for 5 amp plug point with piano type switch & socket etc. 141 (B)
2
844
422
Add for light / fan points with modular type switches in place of piano type switches 187 (A)
32
1408
44
Add for plug point with modular switch & socket in place of piano type switch & socket 187 ©
2
166
83
Supply & fixing of power plug with 20 amp 250 volts flush type modular switch and 5 pin 20 amp 250 volts flush type universal modular socket on concealed MS box including supply of all material, labour T&P etc. required for proper completion of work 1139 (A)
3
1875
625
MAINS & SUBMAINS
-
-
-
Supply & wiring of sub main with FR P.V.C. insulated 1100 volts grade single core copper conductor cable in heavy gauge rigid steel coduit partly concealed in wall and partly laid in slab along with the reinforcement before concreting complete with one no. 14 SWG copper earth continuity wire complete in all respects.
-
-
-
2 x 4 sq. mm. In 20 mm dia conduit. : 221 (B)
50
11050
221
2 x 10 sq. mm. In 25 mm dia conduit. :223 (B)
10
3760
376
DISTRIBUTION BOARDS & CIRCUIT BREAKERS
-
-
-
S/F of surface / flush mounting SPN Distribution board (Legrand Lexic) without MCB complete in all respects as directed at site by Engineer-in-charge. 12 WAYS : 1025A
1
1850
1850
Supply & fixing of 6/10/16/20/25/32 amp. SP MCB (10 KA) (Legrand Lexic) :1002
10
2600
260
S/F of 40 Amp DP MCB (10 KA) (Legrand Lexic) 1010
2
2360
1180
S/F of sheet steel enclosure for DP / TP / FP MCB with neutral link and earth terminal. 1033
1
550
550
EARTHING
-
-
-
Supply & burrying of 600mm x 600mm x 6.0mm G.I. plate, vertically for earthing with its top at least 3 m below ground level complete 20mm dia. G.I.pipe and funnel for watering and one earthing lead of no. 8 SWG G.I. wire in 15 mm dia. GI pipe upto switch board (from apron to switch board the cost of GI pipe & GI wire will be extra) 300mm square C.I. box with hinged cover, masonary housing alternate layer of charcoal/coke and salt atleast 150mm thick alround etc. as per the direction of engineer in-charge complete in all respect . 703
1
5380
5380
Supplying & Laying of one number 8 SWG G. I. wire in 15 mm. dia. G. I. pipe for earthing, laid in ground or in wall duly concealed including the cost of cement, sand, labour, T & P and other material required for proper completion of the work as directed at site. 721
28
5600
200
CABLES
-
-
-
Supply and laying of ISI marked aluminium conductor PVC / XLPE insulated armoured, served, sheathed cable 1100 volts grade at 750 mm below ground level over a cushion of 75 mm thick sand around & protected with brick on sides & top on surface the cable run shall be fixed on M.S. clamps etc. of suitable size complete in all respect. The armouring of the cable shall be properly connected with the earth conductor by clamps etc. 10 sqmm 2 core : 501
50
14600
292
Supply fixing of plam or pin type copper tin plated cable socket (lug) to the cable leads, insulating with tape and making connections etc. complete in all respects as per direction of Engineer-in-charge. 10 sq.mm. : 504
7
140
20
Supply and fixing brass nickle plated compression glands for PVC insulated armoured, served, sheathed cable including rubber ring etc. complete in all respect. The armouring of the cable shall be properly connected with the earth conductor. 10 sqmm 2 core : 503
2
160
80
Erection and testing of exhaust fan on the existing hole with suitable size of rag bolts nuts and washers etc complete in all respects. 1120
4
780
195
Supply and fixing of 16 gauge MS drum duly painted including making hole in the wall for exhaust fan and finishing properly complete in all respect. 1122
4
3240
810
Supply & fixing of recess/surface/ pendent mounting round10 to 15 watt LED Down lighter having powder coated die cast aluminium housing with heat silk, diffuser/ reflector and driver set complete in all respect. 1402
7
9450
1350
Supply & fixing of LED tube light with batten suitable for upto 1x22 watt LED tube light fittings including tube on surface complete in all respect Cat- AAA 1413
5
5950
1190
Supply & fixing of recess/ surface mounting round 24 watt to 32 wat tLED down lighter having powder coated die cast alumnium housing with extended heat sink, diffuser / Reflector and driver set completed in all respect. 1404
5
17500
3500
Supply, laying, jointing, testing and commissioning of ISI marked (IS : 14930, part 2) H.D.P.E. (DWC) Double wall Corrugated pipe for cable laying having corrugation on outer wall and plain smooth surface at inner side including transportation upto the site, jointing, providing and fixing all fittings i.e. sockets, couplers, reducers, end caps etc including excavation in all kind of soil upto 1 meter depth of suitable width with back filling of soil into trenches to complete the works in all respects. (Make : Duraline / Jain / AKG) 63 mm. ID / 78 mm OD
5
446
89.34
Supply of AC 230/250 volts, 50 HZ fresh air fans including providing nuts, bolts, mounting frame and other accessories etc. complete : (Make : Bajaj / Usha / newtek / Havells) 300 mm sweep
1
1350
1350
Supply of AC 230/250 volts, 50 HZ exhaust fans including providing nuts, bolts, mounting frame and other accessories etc. complete (Make : Bajaj / Crompton / Havells) 300 mm sweep 900 rpm
4
7520
1880
PLUMBING WORKS
-
-
-
SANITARY FIXTURES & ACCESSORIES
-
-
-
Providing and fixing white vitreous china pedestal type water closet (European type W.C. pan) with seat and lid, 10 litre low level white P.V.C. flushing cistern with manually controlled device (handle lever), conforming to IS : 7231, with all fittings and fixtures complete including cutting and making good the walls and floors wherever required : PWD 17.1.1
7
22225
3175
Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass pillar taps, 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever require (a) White Vitreous China Flat back wash basin size 550x 400 mm with single 15 mm C.P. brass pillar tappillar tap. PWD 17.7.4
8
19888
2486
Providing and fixing flexible P.V.C. waste pipe for sink or wash basin including PVC waste fittings complete. 32 mm dia (for wash basin) PWD 17.28.1.1
8
880
110
Providing & Fixing 600 X 450 mm bevelled edge mirror of superior glass (of approved quality) complete with 6mm thick hard board ground fixed to wooden cleats with C.P. brass screws and washers complete. PWD 17.31
8
8448
1056
Providing & fixing viterous china toilet paper holder. C.P. Brass PWD 17.34.1
5
2340
468
WATER SUPPLY PIPES AND FITTINGS
-
-
-
Providing, fixing chlorinated polyvinyl Chloride (CPVC) pipes, having thermal stability for hot and cold water supply including all CPVC plain and brass threaded fittings including fixing the pipes with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer in charge. : Internal work exposed on wall : 40mm nominal outer dia pipes : 18.7.5
25
10550
422
Providing, fixing chlorinated polyvinyl Chloride (CPVC) pipes, having thermal stability for hot and cold water supply including all CPVC plain and brass threaded fittings including fixing the pipes with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer in charge. : Internal work exposed on wall : 50mm nominal outer dia pipes : 18.7.6
20
10620
531
Providing, fixing chlorinated polyvinyl Chloride (CPVC) pipes, having thermal stability for hot and cold water supply including all CPVC plain and brass threaded fittings including fixing the pipes with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer in charge. Concealed work including cutting chase and making good the wall etc.
-
-
-
15mm nominal outer dia pipes: 18.8.1
40
11360
284
20mm nominal outer dia pipes : 18.8.2
20
6380
319
25mm nominal outer dia pipes : 18.8.3
15
5640
376
32mm nominal outer dia pipes : 18.8.4
10
4770
477
Providing & fixing gun metal gate valve with C.I. wheel of approved quality (screwed end) : 40 mm nominal bore: 18.17.3
3
4344
1448
Providing & fixing gun metal gate valve with C.I. wheel of approved quality (screwed end) : 50 mm nominal bore. 18.17.4
2
1458
729
Providing & fixing 15 mm nominal bore 45 cm long unplasticised PVC connection pipe with brass unions. : PWD 18.21.2.1
15
1057
70.5
Providing & fixing 15 mm nominal bore CP brass bib cock of approved quality conforming to IS 8931.: PWD 18.49.1
7
4109
587
Providing and fixing 15 mm nominal bore C.P brass long nose bib cock of approved quality conforming to IS standards and weighing not less than 810 gms. PWD 18.50.1
8
5176
647
Providing & fixing 15 mm nominal bore C.P. brass stop cock (concealed) of standard design and of approved make conforming to IS : 8931. : PWD 18.52.1
8
5088
636
Providing & fixing 15 mm nominal bore C.P brass angle valve for basin mixer and geyser points of approved quality conforming to IS 8931. : PWD 18.53.1
15
8625
575
Providing and fixing white vitreous china flat back or wall corner type lipped front urinal basin of 430x260x350 mm and 340x410x265 mm sizes respectively with automatic flushing cistern with standard flush pipe and C.P. brass spreaders with brass unions and G.I clamps complete, including painting of fittings and brackets, cutting and making good the walls and floors wherever required Range of four urinal basins with 10 litre white P.V.C. automatic flushing cistern: PWD 17.4.4
4
50040
12510
Constructing brick masonry chamber 300 x 300 x 500 mm, inside with F.P.S. brick work in cement mortar 1: 4 (1 cement : 4 coarse sand) for Stop Cock, with C. I. surface box 100 x 100 x 75 mm (inside) with hinged cover fixed in cement concrete slab 1:2:4mix (1cement : 2 coarse sand:4 grade stone aggregate 20mm nominal size); necessary excavation, foundation concrete 1:5:10 (1 cement :5 fine sand: 10 graded stone aggregate 40mm nominal size) and inside plastering with cement mortar 1 : 3 (1 cement : 3 coarse sand ) 12 mm thick finished with a floating coat of neat cement complete as per standard design: 18.32.1
3
4146
1382
Providing and fixing square mouth S. W. Gully trap grade `A' complete with C.I. grating brick masonry chamber with F.P.S bricks and water tight CI cover with frame of 300 x 300 mm size (inside) the weight of cover to be not less than 4.50 kg and frame to be not less than 2.70 kg as per standard design : 150 x 100 mm. size P type : PWD 19.4.2.1
2
4686
2343
Providing and fixing PTMT towel ring trapezoidal shape 215 mm long, 200 mm wide with minimum distances of 37 mm from wall face with concealed fittings arrangement of approved quality and colour, weighing not less than 88 gms.: 17.72
4
678
169.5
Providing and placing on terrace (at all floor levels) polyethylene water storage tank, IS : 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank.: PWD 18.48
1000
11000
11
Providing & fixing of white vitreous china urinal partition for half stall urinals. (Jaquar or equivalent)
3
2850
950
Providing, fixing, jointing and testing in position of ISI marked UV stabilized UPVC pipes for soil, waste, and vent, Type-B as per IS : 13592 suitable for rubber ring joints, including all neccessary specials and fittings (confirming to IS:14735) i.e. bends, tees, junctions (with or without doors), reducers, WC connectors, couplers, expansion joints / bellows, cowels, clamps, rubber rings, clean outs etc. fixing at wall/ ceiling/ floor level supported by clamp & hangers etc. in concealed / inside duct / under floor & basement ceiling / external work etc. including chase cutting as required, excavation and back filling in all kind of soils, suspended from floor under false ceiling or embedding the pipes laid under floors / building in 75 mm. alround 1:2:4 cement concrete (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) including cost of shuttering for proper completion of the work, breaking and making good the walls and floors etc. after pipes have been duly laid and tested. The rubber ring shall confirm to IS:5382. (Make : Supreme / Finolex / Prince)
-
-
-
110 mm dia (Wall Thickness - 3.2 to 3.8 mm)
10
4400
440
75 mm dia (Wall Thickness - 3.2 to 3.8 mm)
15
4725
315
Providing, fixing, jointing and testing in position ISI marked (IS:4985) UPVC pipes of min 6 Kg/ Sqcm rating with fitting for waste pipe from fixtures to floor trap including reduces, enlarger, socket, couplers, bends, tees etc including fixing at wall/ ceiling level supported by clamp & hangers etc. cutting holes in wall/ floors/ slabs and making good the same with cement concrete 1:2:4 complete as required. (Make : Supreme / Finolex / Prince): 50 mm dia.
10
1050
105
Providing & fixing UPVC Floor trap of self cleansing design with CP Jali complete in all respects. (Make : Supreme / Finolex / Prince) : P-Trap type Floor Trap 110 x 75 mm
10
4600
460
Extra for providing & fixing 125 mm dia C.P. grating in place of C.I. grating over floor traps.
10
800
80
Providing & fixing 50 mm. dia. G.I elbow (drain point) in the toilet floor including 50 mm dia. C.P. waste jali complete as required.
5
1425
285
PLANTER
-
-
-
Earth work in excavation by mechanical means (Hydraulic excavator) / manual means over areas (exceeding 30cm in depth. 1.5 m in width as well as 10 sqm on plan) including disposal of excavated earth, lead upto 50m and lift upto 1.5m, disposed earth to be levelled and neatly dressed. All kinds of soil: PWD 2.6.1
55.2
8887
161
Cement Concrete with 40 mm gauge approved stone ballast, coarse sand and cement in proportions of 8:4:1 including supply of all materials, labours,tools & plants etc. required for poper completion of the work, Excluding GST : PWD 4.1.8
18.45
112526
6099
Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in foundation and plinth in: Cement mortar 1:4 (1 cement : 4 coarse sand): PWD 6.1.1
40.5
271957
6715
Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in superstructure above plinth level up to floor V level in all shapes and sizes in : Cement mortar 1:4 (1 cement : 4 coarse sand) PWD 6.4.1
1.65
12323
7469
Providing and laying cement concrete in retaining walls, return walls, walls (any thickness) including attached pilasters, columns, piers, abutments, pillars, posts, struts, buttresses, string or lacing courses, parapets, coping, bed blocks, anchor blocks, plain window sills, fillets, sunken floor etc., up to floor five level, excluding the cost of centering, shuttering and finishing: 1:1½:3 (1 cement : 1½ coarse sand (zone-III) derived from natural sources : 3 graded stone aggregate 20 mm nominal size derived from natural sources). PWD 4.2.2
51.75
435114
8408
Reinforcement for RCC work including straightening, cutting, bending, placing in position complete. - Thermo-Mechanically Treated bars. L.D.A.
60.9
487200
8000
Centering and shuttering including strutting, propping etc. and removal of form for Walls (any thickness) including attached pilasters, butteresses, plinth and string courses etc. : PWD 5.9.2
143.85
47182
328
Stone work (machine cut edges) for wall lining etc. (veneer work) upto 10 metre height, backing filled with a grout of average 12 mm thick cement mortar 1:3 (1 cement : 3 coarse sand) including pointing in white cement mortar 1:2 (1 white cement : 2 stone dust) with an admixture of pigment matching the stone shade : (To be secured to the backing and the sides by means of cramps and pins which shall be paid for separately) Red sand stone - Exposed face machine cut and table
rubbed with rough backing. 40 mm thick: PWD 8.14.2.4
207.9
684198
3291
P/F MS grills of required pattern in frames of windows Fixed to openings/wooden frames with rawl plugs screws etc AR. DSR 9.48.2
1733.4
214941
124
Painting Steel work with Deluxe Multi surface paint Two or more coats AR. DSR 13.48.3
144.45
16178
112
Providing and fixing of Terrakota Jali size 205x205x62.5 mm etc all complete in direction of engineer in charge.
144.45
664758
4602
Providing and fixing adjustable stainless steel cramps of approved quality, required shape and size, adjustable with stainless steel nuts, bolts and washer (total weight not less than 260 gms), for dry stone cladding fixed on frame work at suitable location, including making necessary recesses in stone slab, drilling required holes etc complete as per direction of the Engineer-in-charge. A.R. DSR 8.22
420
42168
100.4
EXTERNAL ELECTRIFICATION & LANDSCAPE LIGHTING
-
-
-
Supply & Fixing of’ 5mtr long Antique designed pole with cast aluminium/iron base with galvanized steel pipe and decorative top painted with primer then painted with dull finished polyurethane paint fitted with MCB and connector with decorative bracket single arm for mounting of 1nos drop down lantern with body made out of spun aluminium and fitted with poly carbonate diffuser in 110W with built in surge protector and lumn output110lmn/watt. Design as per Architect in charge.
40
2000000
50000
Supplying Testing & Installation of Led Flood Light Luminaire 50W Philips Make Model - BVP 140 Led 50 CW PSU WH/ Wipro/ Luster etc all complete of direction of engineer in charge.
30
150000
5000
Supplying Testing & Installation of Led Flood Light Luminaire 100WV Philips Make Model- BVP 142 Led 100 CW PSU WH / Wipro/ Luster etc all complete of direction of engineer in charge.
50
475000
9500
Supplying Testing & Installation of Garden Spike Light 12W WW Make Philips/ Wipro/ Luster etc all complete of direction of engineer in charge.
50
122500
2450
Supply and fixing of decorative 16 Watt LED bollard luminaire with driver set confirming to IP 65 protection complete in all respect.
50
750000
15000
Earthing with copper earth plate 600 mm X 600 mm X 3 mm thick including accessories, and providing masonry enclosure with cover plate having locking arrangement and watering pipe of 2.7 metre long etc. with charcoal/ coke and salt as required sor 2018 E &M
20
203400
10170
Supplying and laying 6 SWG G.I. wire at 0.50 metre below ground level for conductor earth electrode, including connection/ termination with GI thimble etc. as required. A.R. DSR 5.7 (E&M)
400
10720
26.8
Supplying and laying 25 mm X 3 mm copper strip at 0.50 metre below ground as strip earth electrode, including connection/ terminating with nut, bolt, spring, washer etc. as required. (Jointing shall be done by overlapping and with 2 sets of brass nut bolt & spring washer spaced at 50mm) SOR 711
700
357000
510
Supply and laying of aluminium conductor PVC insulated armoured served sheathed cables 1100 Volts grade at a depth of 750 mm below ground level over a cushion of 75 mm. thick sand all around and protected with burnt bricks on sides and on top. On surface the cable run shall be fixed on M.S. clamps etc. of suitable size or as directed by the Engineer-Incharge ,complete in all respect. The armouring of the cable shall be properly connected with the earth conductor by clamps etc. PWD 501
-
-
-
6.00 Sqmm 4 Core
1500
445500
297
25.00 Sqmm 3.5 Core
350
130550
373
70.00 Sqmm 3.5 Core
100
61300
613
Supply and erection of factory fabricated and wired metal clad dust and vermin proof floor mounting panel TPN switch board complete with the following HRC type heavy duty TPN fuse switches with fuses and instrument chamber etc. complete in all respects. The instrument chamber shall be separate and shall comprise of flush type ammeter, voltmerer, selector switches for ammeter and voltmeter, instrument fuses, current transormer etc. The board shall have suitable capacity electroytic alumininum busbars as per IS8623 istulate with heat shrink sleeving and mountend on non hygroscopic supports such as CMC/DMC support with deteachable side covers and shall be suitable for extension on the sides. PWD 802 C
-
-
-
The switches shall be complete with suitable cable end boxes, reverse entery boxes in case of pedestaal type, cable sockets, compression glands and indicating lamp on incoming etc. The job includes the grounting of the board as per direction of Engineer-in-Charge. All coutgoing switches of 100 Amp. and above will be provided with ampere metre current transformers and selector switches and instrument fuses etc. The switches board shall be fabricated with CRCA sheet with a minimum thickness of 1.6 mm/2 mm. Cubicle type switch board shall be of cat A B & B-II and pedestal type for Cat-B and C only Incoming
200 Amp. TPN-1 No Outgoing 100 Amp. TPN-1 No and 63 Amp. TPN-3 Nos. Cat. B. Cubicle Type
2
161800
80900
Supply and fixing following capacity of automatic street light cubicle control panel painted with anti corrosive alkali and acid proof paint consisting of time switch TSO 100 series with contactors, HRC fuses, isolating switch metering instrument & instrument box with CTs etc. in case of TPN, complete in all respect.40 A TPN PWD 807 f
2
58600
29300
Supplying and laying of following size DWC HDPE pipe ISI marked along with all accessories like socket, bend, couplers etc.conforming to IS 14930, Part II complete with fitting and cutting,jointing etc. in the existing trench, complete as required. 63 mm dia (OD-63 mm & ID-51 mm nominal) 14.15.1
1500
165106
110.07
Supplying and laying of following size DWC HDPE pipe ISI marked along with all accessories like socket, bend, couplers etc.conforming to IS 14930, Part II complete with fitting and cutting,jointing etc. in the existing trench, complete as required. 90 mm dia (OD-90 mm & ID-76 mm nominal) 14.15.2
25
3683
147.34
PLUMBING WORK FOR VENDING ZONE
-
-
-
Excavating trenches upto 1.5 meter depth in all kind of soil of required width for pipes. including excavation for sockets and dressing of sides ramming of bottoms including getting out the excavated soil & then returning the soil as required, in layers not exceeding 20 cm in depth including consolidating each deposited layer by ramming, watering, etc & disposing of surplus excavated soil as directed within a lead of 50m.
-
-
-
(i) Pipes etc not exceeding 80 mm dia.
300
27900
93
(ii) Pipes etc exceeding 80 mm but not exceeding 300 mm dia.
300
45600
152
Providing, fixing C.I. Sluice valve class - II (with cap) complete with bolts, nuts, rubber insertions etc (the tail pieces if required will be paid separately) : 100 mm. dia. 18.31.1.2
10
35000
3500
Providing and fixing C.I. Double acting air valve of approved quality with bolts, nuts, rubber insertions etc. complete (the tail pieces if required will be paid separately) : 50 mm diameter 18.59.1
20
85070
4253.5
Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings This includes jointing of pipes & fittings with one step CPVC solvent cement, trenching, refilling & testing of joints complete as per direction of Engineer in Charge.
-
-
-
75 mm nominal inner dia Pipes (18.9.8)
150
221250
1475
25mm nominal outer dia pipes (18.9.3)
50
10600
212
40mm nominal outer dia pipes( 18.9.5)
100
37100
371
62.50 mm nominal inner dia Pipes (18.9.7)
150
173700
1158
100 mm nominal inner dia Pipes (18.9.9)
150
311550
2077
Constructing masonry Chamber 30x30x50 cm inside, in brick work in cement mortar 1:4 (1 cement :4 coarse sand) for stop cock, with C. I. surface box 100x100 x75 mm (inside) with hinged cover fixed in cement concrete slab 1:2:4 mix (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size), i/c necessary excavation, foundation concrete 1:5:10 ( 1 cement : 5 fine sand : 10 graded stone aggregate 40mm nominal size ) and inside plastering with cement mortar 1:3 (1 cement : 3 coarse sand) 12mm thick, finished with a floating coat of neat cement complete as per standard design : With common burnt clay F.P.S.(non modular) bricks of class designation 7.5 A.R. 18.32.1
40
55280
1382
Constructing brick masonry chamber 600 x 600 x 750 mm inside with F.P.S. brick work in cement mortar 1:4 (1 cement : 4 coarse sand) for Sluice Valve, with C. I. surface box 100 mm top diameter, 160 mm bottom diameter and 180mm deep (inside) with chained lid and RCC top slab with 1 : 2 : 4 mix (1 cement : 2 coarse sand : 4 grade stone aggregate 20 mm nominal size); necessary excavation, foundation concrete 1:5:10 (1 cement : 5 fine sand: 10 graded stone aggregate 40 mm nominal size) and inside plastering with cement mortar 1 : 3 (1 cement : 3 coarse sand ) 12 mm thick finished with a floating coat of neat cement complete as per standard design
20
168100
8405
Supplying, fixing, testing and commissioning of butterfly valve of PN 1.6 rating with bronze/gunmetal seat duly ISI marked complete with nuts, bolts, washers, gaskets conforming to IS 13095 of following sizes as required : 80 mm dia DSR
(FIRE-2019) A.R.-11.4
20
71360
3568
Providing and fixing Stainless Steel A ISI 304 (18/8) kitchen sink as per IS:13983 with C.I. brackets and stainless steel plug 40 mm, including painting of fittings and brackets, cutting and making good the walls wherever required : Kitchen sink with drain board 510x1040 mm bowl depth 250 mm: PWD 17.10.1.1
20
91060
4553
Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass pillar taps, 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls
wherever require: White Vitreous China Wash basin size 630x450 mm with a pair of 15 mm C.P. brass pillar taps PWD 17.7.1
20
63660
3183
Providing and fixing C.P. brass long nose bib cock of approved quality conforming to IS standards and weighing not less than 810 gms. 15 mm nominal bore PWD 18.50.1
20
12940
647
Providing and placing on terrace (at all floor levels) polyethylene water storage tank, IS : 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow
pipes but without fittings and the base support for tank. PWD 18.48
10000
110000
11
Construction of Drain
-
-
-
Earth work in excavation in foundation in ordinary soil in trenches (loam,clay or sand) including lift upto 1.5m.lead upto 50 m. and dressing of sides and ramming of bottom and disposal of surplus earth as directed by Eng.incharge with in a distance of 50 m. PWD 2.6.1
308
49588
161
Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level : 1:4:8 (1 Cement : 4 coarse sand : 8 graded stone aggregate 40 mm nominal size) (PWD 4.1.8)
40
243960
6099
Providing and laying cement concrete in retaining walls, return walls, walls (any thickness) including attached pilasters, columns, piers, abutments, pillars, posts, struts, buttresses,string or lacing courses, parapets, coping, bed blocks, anchor blocks, plain window sills, fillets, sunken floor etc., up to floor five level, excluding the cost of centering, shuttering and finishing: 1:1½:3 (1 cement : 1½ coarse sand (zone-III) derived from natural sources : 3 graded stoneaggregate 20 mm nominal size derived from natural sources). PWD 4.2.2
104.21
876197
8408
Reinforcement for RCC work including straightening, cutting, bending, placing in position complete. - Thermo-Mechanically Treated bars.
81.8
654400
8000
Centering and shuttering including strutting, propping etc. and removal of form work for :Retaining walls, return walls, walls (any thickness) including attached pilasters, buttresses, plinth and string courses fillets, kerbs and steps etc.(PWD 5.9.2)
720
236160
328
Providing and fixing factory made Thermodrain FRP Grating drain covers, having size upto 600x1001x30 mm, Gratings are with 0% filler & are self pigmented without any painting or coating. The 0% filler imparts higher flexural strength and doesn’t allow the gratings to crack due to its high cohesion. This enhances the life of the product by 50% under exposure to load, Sunlight or Rainfall and LOAD BEARING 10 tonne capacity all complete in direction of engineer in charge. (Make Thermodrain/ Aco Drain/ Zurn)PSR
27.6
289800
10500
Specialised drainage Work
-
-
-
Exacavation for depth below ground level for laying sewers, manholes, gully pits, chambers sump etc. in ordinary soil (earth sand , loam and clay including cutting of joints pits, trimming, dressing, levelling refilling of trenches in 20 cm layers watering and ramming the same including removal of surplus earthh or other dismatled material upto a distance of 50 mtr from the centre of trenches upto 1.50 mtr : LDA PSR
33.75
5433
161
Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level : 1:4:8 (1 Cement : 4 coarse sand : 8 graded stone aggregate 40 mm nominal size) : (PWD 4.1.8)
9
54891
6099
Providing and fixing ACO pre-fab polymer concrete Multiline V100 channels conforming to relevant EN 1433 standards. The Channel should have V-shaped profile, tounge and groove jointing arrangement, in-built galvanised steel edge rail, with in-built slope along the complete length of the channel, and polymer concrete channels to be made of zero water absorbtion, of density being 2.1 - 2.3gm/cm3, with surface roughness of aprox 25 µm complete including all necessary civil and finishing works as required as per site and the instructions of the engineer - in - charge for following sizes: Channel Size 1000/500 x 135 x 150-250 mm (L x W x H) Make: ACO/Muffle/ABT Drain/ULMA Marshal: LDA PSR
50
300000
6000
Providing and fixing of ACO Stainless Slot grating for Multiline V100 channel of size 1000x130x105(LxWxH)mm having clear opening of 8-10mm and confirming to Load Class C250 as per EN DIN 1433, to fit above channels, complete including all necessary civil and finishing works as required as per site and the instructions of the engineer - in - charge. Make: ACO/Muffle/ABT Drain/ULMA Marshal : LDA PSR
50
250000
5000
Providing and Fixing of Polymer Concrete Channel drainage system Multiline V 100 in the size of 1000mm X 135mm X 80mm (L X B X H) Channel according to the EN 1433 with Drainlock, with ductile iron edge rails, according to D400 load class as per EN 1433.Make: ACO/Muffle/ABT Drain/ULMA Marshal LDA PSR
50
300000
6000
Providing and fixing of ACO Stainless Sideline Slot grating for Multiline V100 channel of size 1000x130x105(LxWxH)mm having clear opening of 8-10mm and with continuous LED lightline along the drain with a long life of approximately 100,000 hours. The nominal voltage of the system is 28V DC, LED lightline should be complete with cable end and waterproof connection. The protection class should be IP 67th. The system should confirming to Load Class C250 as per EN DIN 1433, to fit above channels, complete including all necessary civil and finishing works as required as per site and the instructions of the engineer - in - charge. Make: ACO/Muffle/ABT Drain/ULMA Marshal
50
1316000
26320
Providing and fixing pre-fab polymer concrete channels conforming to relevant EN standards with V-shaped profile, tounge and groove jointing arrangement, polymer concrete channels to be made of zero water absorbtion, of density being 2.1 - 2.3gm/cm3, with surface roughness of aprox 25 µm, complete including all necessary civil and finishing works as required as per site and the instructions of the engineer - in - charge. Size: 1000/500 x 118 x 100 mm (L x W x H)
Make: ACO/Muffle/ABT Drain/ULMA Marshal
50
125000
2500
Providing and fixing Stainless Steel grating (SS Grade 304/1.4301) conforming to relevant EN standards to fit above channels, complete including all necessary civil and finishing works as required as per site and the instructions of the engineer - in - charge. Size: 1000/500 x 118 mm (L x W)
Make: ACO/Muffle/ABT Drain/ULMA Marshal
50
300000
6000
Construction & Installation of Submersible Pump (180 M. Depth)
2
1033220
516610
Irrigation System
1
305881
305881.38
M.S. RAILING
-
-
-
Providing and laying cement concrete in retaining walls, return walls, walls (any thickness) including attached pilasters, columns, piers, abutments, pillars, posts, struts, buttresses,string or lacing courses, parapets, coping, bed blocks, anchor blocks, plain window sills, fillets, sunken floor etc., up to floor five level, excluding the cost of centering, shuttering and finishing: 1:1½:3 (1 cement : 1½ coarse sand (zone-III) derived from natural sources : 3 graded stoneaggregate 20 mm nominal size derived from natural sources). PWD 4.2.2
10.58
88956
8408
Reinforcement for RCC work including straightening, cutting, bending, placing in position complete. - Thermo-Mechanically Treated bars.
9.97
79760
8000
40 mm thick rubbed stone flooring over 20 mm (average) thick base of cement mortar 1:5 (1 cement : 5 coarse sand) with joints 3 mm thick, side buttered with cement mortar 1:2 (1 cement : 2 stone dust) admixed with pigment to match the shade of stone and pointing with same mortar. Red sand stone A.R. DSR 11.30.1
138
144092
1044.15
Mild steel or iron work of heavey sizes such as trusses, builtup gates, door frames, recor racks, roof work, gates etc. wrought to required from including drilling holes, revetting. or welding, where necessary and also including supply of steel, bolts, nuts, etc. & their fixing reqiured for proper completion of the work. A.R. As per DSR 9.48.2
8000
992000
124
Painting Steel work with Deluxe Multi Surface Paint to give an even shade. Two or more coat applied @ 0.90 ltr/10 sqm over an under coat of primer applied @ 0.80 ltr/ 10 sqm of approved brand and manufacture PWD 641+642
420
47040
112
UPGRADATION OF BRIDGE
-
-
-
Providing and fixing 18 mm thick gang saw cut, mirror polished, premoulded and prepolished, machine cut for kitchen platforms, vanity counters, window sills, facias and similar locations of required size, approved shade, colour and texture laid over 20 mm thick base cement
mortar 1:4 (1 cement : 4 coarse sand), joints treated with white cement, mixed with matching pigment, epoxy touch ups, including rubbing, curing, moulding and polishing to edges to give high gloss finish etc. complete at all levels. PWD 8.2.2.2
200
946800
4734
Dismantling of existing plaster including disposal of refuse as directed by engineer in charge with a distance of 60 mtr PWD 706
3000
123000
41
Scraping of old white or colour wash including disposal of refuse as directed by the engineer in charge with in a distance of 60 mtr PWD 708
7000
87500
12.5
12 mm cement plaster of mix : 1:6 (1 cement: 6 coarse sand) PWD 13.4.2
3000
525000
175
Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete. PWD 13.80
10000
990000
99
Finishing walls with Premium Acrylic Smooth exterior paint with Silicone additives of required shade: New work (Two or more coats applied @ 1.43 ltr/10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/10 sqm) PWD 13.47.1
10000
1230000
123
Desiging & making of theamatic painting as per approval of architect in charge and works completio of direction of engineer in charge.
2000
1128500
564.25
HORTICULTURE AND LANDSCAPING
-
-
-
Providing and stacking of Wedelia trilobata, full of leaves in 15 cm size of Earthen Pot / Plastic Pot & as per direction of the officer-in-charge. DSR 6.31
100
1300
13
Providing and Displaying Carissa carandas (Karonda) 75 to 90 cm ht. in 40 cm Cement Pot as per direction of the officer-in-charge. DSR 7.79 Based
80
3120
39
Providing and Displaying ELEPHANT EAR PLANT (Colocasia) 75 to 90 cm ht. in 40 cm Cement Pot as per direction of the officer-in-charge. DSR 7.79 Based
50
1950
39
Providing and Displaying Lawsonia Inermis (Henna Tree) 75 to 90 cm ht. in 40 cm Cement Pot as per direction of the officer-in-charge. DSR 7.79 Based
60
2340
39
Providing and Displaying Manokamini (Murraya Panculata) 75 to 90 cm ht. in 40 cm Cement Pot as per direction of the officer-in-charge. DSR 7.79 Based
50
1950
39
Providing and Displaying Wild Grass as per direction of the officer-in-charge. DSR 7.79 Based
100
3900
39
Providing and Displaying GOLDEN BAMBOO (Phyllostachys aurea) 75 to 90 cm ht. in 40 cm Cement Pot as per direction of the officer-in-charge. DSR 7.79 Based
200
7800
39
Providing and Displaying Chrysopogon zizanioides (Vetiver GRASS) 75 to 90 cm ht. in 40 cm Cement Pot as per direction of the officer-in-charge. DSR 7.79 Based
100
3900
39
Providing and Displaying Canna Lily 75 to 90 cm ht. in 40 cm Cement Pot as per direction of the officer-in-charge. DSR 7.79 Based
50
1950
39
Providing and Displaying Pretty Bearded Iris 75 to 90 cm ht. in 40 cm Cement Pot as per direction of the officer-in-charge.
50
1950
39
Providing and Displaying Nepenthes Lady Luck 75 to 90 cm ht. in 40 cm Cement Pot as per direction of the officer-in-charge. DSR 7.79 Based
50
1950
39
Providing and Displaying Bougainvillea named variety, Sobhra, Thima, Marry palmar, Cherry Blossom etc. well developed with fresh & healthy bushy in full bloom 75 to 90 cm ht. in 40 cm Cement Pot as per direction of the officer-in-charge. DSR 5.12
50
13993
279.86
Providing and stacking of Bougainvillea (Variety Butiana, Lady Mary Baring, Mahara,Mohan,Scarlet Queen, Variegated, Glabra Formosa, Peruviana
Odissi, Paratha, Subhra,Thimma, Spectabilis L.N Birla, Refulgens) of height 30 cm. to 45 cm. with 2-3 branches in 20 cm size of Earthen pots / Plastic pots & as per direction of the officer-in-charge. DSR 9.4
50
1733
34.67
Providing and Displaying Bamboo Buddha valley with fresh & healthy 3 to 4 suckers having 75 to 90 cm ht. in 25 cm size Earthen Pot/ Plastic Pot as per direction of the officer-in-charge. DSR 5.7
50
19988
399.77
Providing and stacking of Michelia champa (Golden Champa) of height 90-105 cm. in earthen pots of size 25 cm as per direction of the officer-in-charge. DSR 7.55
50
3900
78
Providing and stacking of Ziziphus mauritiana Indian jujube (BER) of height 90-105 cm. in earthen pots of size 25 cm as per direction of the officer-in-charge.
95
7410
78
Providing and stacking of Citrus limon LEMON TREE of height 90-105 cm. in earthen pots of size 25 cm as per direction of the officer-in-charge.
100
7800
78
Providing and stacking of Morus alba SHAHTOOT of height 90-105 cm. in earthen pots of size 25 cm as per direction of the officer-in-charge.
100
7800
78
Providing and stacking of Eugenia jambolana (Jamun) of height 150-165 cm. in big poly bags of size 25 cm as per direction of the officer-in-charge.
50
3250
65
Providing and stacking of Azadirachta indica ( Neem ) of height 120-130cm in big polybag of size 25 cm as per direction of the officer-in-charge.
50
2817
56.34
Providing and stacking of Ficus Racemosa (Goolar) of height 150-165 cm. in Big HDPE Bag as per direction of the officer-in-charge.
50
3900
78
Providing and stacking of Ficus religiosa (Peepal) of height 150-165 cm. in big poly bags of size 30 cm as per direction of the officer-in-charge.
50
2817
56.34
Providing and stacking of Ficus Virens (Paakad) of height 150-165 cm. in big poly bags of size 30 cm as per direction of the officer-in-charge.
50
2817
56.34
Providing and stacking of Ficus bengalensis (Bargad) of height 120-135 cm. in big poly bags of size 25 cm as per direction of the officer-in-charge.
50
2817
56.34
Providing and stacking of Putranjiva roxburghii of height 90-105 cm. in big polybag of size 25 cm as per direction of the officer-in-charge.
100
3900
39
Trenching in ordinary soil up to required depth including removal and stacking of serviceable materials and then disposing of as directed and spreading earth & neatly levelling, breaking clods etc. and making the trenched area with designed mounds, paths and sitting spaces etc. to proper levels by filling with earth or earth mixed with manure and properly watering complete work in required topography as per drawing & specifications.
3000
93000
31
Supplying and stacking of good earth at site including royalty but including carriage 1km (earth measusred in stacks will be reduced by 20% for payment).
826.64
279817
338.5
Supplying and stacking at site dump manure from approved source,including carriage up to 1 km (manure measured in stacks will be reduced by8% for payment)
110.4
21362
193.5
Mixing earth and manure in specified proportion or as directed.
910.4
13109
14.4
Rough dressing the trenched ground including breaking the clods.
2500
1500
0.6
Fine dressing the ground
2500
3625
1.45
Spreading of mixed good earth and manure in specified proportions as above and in required thickness.
910.4
19300
21.2
Uprooting weeds from the trenched area after 10 to 15 days after flooding with water including disposal of uprooted vegetation.
5000
9750
1.95
Providing & laying Selection no. 1 grass turf with earth 50mm to 60mm thickness on existing ground prepared with proper level and ramming with required tools wooden and than rolling the surface with light roller make the surface smoothen and light watering the same, as per direction of officer in charge
5000
316000
63.2
Preparation of mounds of various size and shape by available excavated / supplied earth in layers not exceeding 20 cm in depth, breaking clods, watering of each layer, dressing etc., lead upto 50 meter and lift upto 1.5 m complete as per direction of Officer-in-charge.
500
6000
12
Excavating, supplying and filling of local earth by mechanical transport upto a lead of 15km also including ramming and watering of the earth in layers not exceeding 20 cm in trenches, plinth, sides of foundation etc. complete.
500
145000
290
Audio System For Indor
1
3319455
3319455.14
Audio System For Outdoor
1
2444915
2444915.64
Signages
1
350580
350580
Bench
20
300000
15000
Dustbin
30
375000
12500
Bollards
20
100000
5000
Evaluation Notes How It Works ?
Potential Partner
Select Your Requirements