Kanpur Development Authority Tender

S/F of LED Street Light Fitting having die cast aluminium body and diffuser with driver set suitable for 75 to 90 watt. Confirming to IP 66 and above Protection complete in all respect.SI. No. 1423/2018. cat AAA

S/L of Arial bunch cable 1100 V grade XLPE insulated KESCo. approved make confirming to latest relevant specification on steel/PCC supports including binding jumpering sagging and cost of material labour T&P etc required for proper completion of work, approved make i.e. Havels, Grandlay,Finolex as per direction of E/I.

(a) (3Cx95+1x70+1x16) Sq.mm

S/L of following size cable "Al" conductor P.V.C. insulated armoured served sheathed cable 1100V grade at a depth of 750mm. Below ground level over a cushion of 75mm. Thick sand alround and protected with burnt bricks on side and top on surface the cable run shall be fixed on MS clamp of suitable size, approved make i.e. Havels, Polycab, Krishna, Gloster; Grandlay as direction of E/I. complete in all respects. 501/2018.

(a) 70 Sq.mm 3½ Core

(b) 25 Sq.mm 3½ Core

(c) 10 Sq.mm 4 Core

S/F of following size palm or pin type copper tin plated cable socket (Lug) to the cable lead insulating with tape and making connections complete in all respects as per direction of E/Inch.SI.No.504/SOR-18.

(a) 95 sq.mm

(b) 70 sq.mm

(C) 35 sq.mm

(d) 25 sq.mm

(e) 10 sq.mm

S/F of following size brass nickel plated compression gland for PVC insulated & armoured served sheathed, underground cable including rubber ring etc. complete in all respect. The armouring of the cable shall be properly connected with the earth as per direction of Engineer-in-charge. SI. No. 503/18.

(a) 70 Sq.mm X 3.5 Core

(b) 25 Sq.mm 3.5 core

(c) 10 Sq.mm 2 core

S/E of stay set at 3.5mtr away from the pole with galvanized 19mm dia 1.8 Mtr long stay rod 30cmx30cmx6.3mm anchor plate thimble stay clamp stay insulator 19mmx600mm double screw tightener 7/3.5 mm G.I. stay wire etc. in 1:3:6 C.C. in all respects. SI.No. 631/18.

S/L of following size G.I. ''B'' class pipe at a depth of 750mm below ground level as cable carrier as direction of E/Inch. A.R. /2018(File No. 15/18-19)

(a) 80 mm dia

Supply, Laying, jointing, testing & commissioning of ISI marked HDPE pipe (PE 80) 63mm dia as per IS 4984 including transportation upto the site jointing by butt welding, providing and fixing all fittings i.e. bends, tees, couples junction, tapers, reducers, adoptors end caps, flange with nut & bolts for fixing of appurtenances compete in all respect as per direction of Engineer-in-charge. (Supreme Make).

Making connection of each street light fitting by 2.5 sqmm 3b corer flexible copper cable from pole connection box to street light fitting etc all coplete as per direction of engineer-in- charge(Analyzed)

S/B of earth rod 20mm dia into 2.5mtr long including G.I. wire 7/16 SWG to connect earth rod to earth clamp on pole 3.00 mtr long steel conduit to carry earth wire along the pole. A.R./ 2018 (File No. 15/18-19)

S/B of 600mmx600mmx6mm G.I plate vertically for earthing with it top at least 3 mtr below G.L. complete with 20mm dia G.I. pipe and funnel for watering and 1 earthing lead of 1 No 8 to 10 SWG G.I. wire in 15mm dia G.I. pipe, plate up to switch board 30Cm C.I. frame with hinged cover masonry housing Alternate layers of charchole/coke and solt etc. as per direction of E/I. Complete in all respects. S.I.No-702/18

S/E of over head line with G.I. wire on 8 to 4 SWG on pole/service bracket including binding etc. complete in all respects SI.No. 628.

S/F of 6 Amp to 32 Amp. DPMCB (10KA) C curve complete in all respect as per direction of Engineer-in-charge. SI No. 1009/18. CAT-A.

Painting of the electric pole with 2 coats of AL’ paint over red oxide primer complete in all respects SI.No.634/18.

S/F of suspension type clamp made of AL alloy and shall be capable of holding Al alloy messenger wire of compacted dia. The eye hook shall be made of forged or mild steel the clamp shall be provided with black weather resistant plastic coating of at least 1mm thickness to prevent insulation of phase conductor from chafing due to rubbing against the clamp it shall provided sufficient flexibility to allow the movement of clamp at both, straight and angle location its hard ware shall have good finished and all ferrous fittings eye hook bolts nut and washer shall be galvanized with zinc and it also includes all the cost of material labour T&P etc required for proper completion of work.

S/F of dead end clamp made of high strength AL alloy and U-bar shall be made of hot dip galvanized steel and eye hook of forged steel or mild steel clamp shall be suitable messenger wire all ferrous fitting eye hook bolt, nut and washer shall be galvanized with zinc including the cost of material labour T&P etc required for proper completion of work. A.R /2018

S/F of distribution board box for three phase ten way connection made of MS sheet 450x300x200mm size complete with 03 nos kit kat 63 amp phase bus bar 25x5mm, natural bus bar 20x5mm copper flat clamps holes etc including the cost of material labour T&P etc for proper completion of work. A.R.

S/F of 40A TPN of outdoor type Automatic street light cubicle control panel painted with anti corrosive alkali and acid proof paint consisting of time switch TSO 100 series with contractors, HRC fuses, isolating switch metering instrument & instrument box with CTs etc, in case of TPN, complete in all respect as per direction of Engineer-in-charge. SI. No. 807/18 e(ii).

S/E of Outdoor type factory fabricated and wired metal clad dust and vermin proof floor mounted MS channel base with bottom & Top cable entries Electrical control pannel with TPN MCCB'S (four pole 36 KA with thermal magnetic release) switches complete & instrument chamber etc. The instrument chamber shall be separate and shall comprise of flush type digital metering system for phase to phase voltage & single phase voltage. current & other parameter (KVA PF KW, KWH etc) in each phase with touch type selector switches for different readings., instrument fuses, 4 Nos. C.T. etc. The panel board shall have suitable capacity electrolytic aluminium busbars as per IS8623 or above instulated with heat shrink sleeving and mounted on non hygroscopic support such as CMC//BMC support with detachable side covers and shall be suitable for extension on the side. The MCCB's shall be complete with suitable cable end boxes compression glands and indicating lamp on incoming etc.The job includes the grouting of the board as per direction of E/Inch all outgoing of 100 Amp and above shall have an a meter. The panel board shall be fabricated with CRCA sheet with minimum thickness of 1.6 mm/2 mm cubicle type switch board shall be of cat A & B only.

(a) Incomer

100 Amp. (36 KA) 4P 415V 50Hz MCCB's 1 No. MCCB's shall be with digital volt meter & Ammeter & LED phase indicators.

(b) Outgoing

32 Amp MCCB 3 Nos. Switch gear make L & T, Indoasian, Haveals

S/F of 63 Amp 415 V metal clad TPN rewire able type switch fuse unit on angle iron bracket/Pole complete in all respects as per direction of E/I. SI. No. 316/18. CAT-B.