Gorakhpur Development Authority Tender

PHASE INDICATOR ABB 03 Nos.

METER VAF ABB 01 No.

250A AUTOMATIC TRANSFER SWITCH FP ABB 01 No.

AMF RELAY WITH ON DELAY TIMER ABB 01 No.

LATCH RELAY & DG CHARGER

BUSBAR

250A FP COPPER BUSBAR ABB 01 Lot.

OUTGOING

100A MCCB FP 25KA WITH SPARDER & HANDLE ABB 05 No.

MISCELLANEOUS:-

Fingure suport & conical insulators, pvc copper wire, power wire & control wire, nut, bolt,washers,ferul numbers, cable ties, tie base cu lugs ,panel lock, i-hooks, pvc tape, color coated busbars sleevees, mcb chanel, pvc chanel, connector chanel, etc.

Supply and laying of aluminium conductor PVC insulated armoured served sheahed cables 1100 Volts grade at a depth of 750 mm below ground level over a cishion of 75mm.thick sand all around and protected with burnt bricks on sides and on top. On surface the cable run shall be fixed on M.S.clamps etc.of suitable size or as directed by the engineer-Incharge, complete in all respect. The armouring of the cable shall be properly connected with the earth conductor by clamps etc. SOR-2018/501 (J)

(M) 70 sq. mm 3-½ Core

(K) 35 sq. mm 3-½ Core

(J) 25 sq. mm 3-½ Core

(I) 16 sq. mm 4 Core

(B) 10 sq. mm 2 Core

S/F of brass/Nikil plated compression gland for PVC insulated and armered cable including rubber ring etc compelte and calbe shall be properly connected with earth as per direction of E/I. SOR-503/2018

(M) 70 sq. mm 3-½ Core

(K) 35 sq. mm 3-½ Core

(J) 25 sq. mm 3-½ Core

(I) 16 sq. mm 4 Core

(B) 10 sq. mm 2 Core

S/F of plain/pin type copper tin plated cable socket (Lugs) to the cable lead insulating with tape and making connection etc. complete in all respect. SOR-504/2018

(H) 70 sq. mm

(F) 35 sq. mm

(E) 25 sq. mm

(D) 16 sq. mm

(C) 10 sq. mm

S/F of cable marker stone diamenation (2'12'30') SOR NO-505/2018

Supply and burring of Safe Earthing Electrode T-19, (Hot Dip Galvanized), Length up to 3000mm, outer Dia 50mm inner Dia 25mm, terminal Dia 12mm, outer Gi Pipe of 16 swg and inner Gi Pipe 12 swg with Hot Dip Galvanization up to 100 micron filled with crystalline conductive mixture (CCM having anti corrosive & conductive property eith 50 Kgs activated soil (BFC) capable of reducing the soil resistivity with good mixture of retaining capacity and one earthing lead of 25mm x 3mm G.I strip, upto switch board (from apron to switch board, the cost of G.I.strip will be extra) along with 30 cm square C.I. frame with hinged cover & masonry housong. Make: As Approved in U.P. P.W.D., & C.P.R.I Certified.SOR-2018/ 725 (B)

S/L of following size HDPE (DWC) pipe ISI marked along with all accessories like socket, bend couplers etc. Conforming to IS 14930, Part II complete with fitting and cutting. jointing etc. direct in ground (75cm below G.L) including excavation and refilling the trench but excluding send cushioning and protective covering etc. complete as required up to the entire satisfaction of Engineer-in charge of the work make Duraling/Rex/Gemini/Tirupati or as per the approved make list of PWD. (Note: Sand cushioning and protective covering bricks cost is included i the cable item cost) DSR-2018, Item no-14.16.1

90/76mm OD/ID

120/103mm OD/ID

S/F of A.B.C. conductor for L.T. line on S.T. pole complete with tensioning binding etc. for proper completion of work. (3x120+1x90+1x16mmsqm) UPPCL RATE.

Supply and Erraction of factory fabricated & wired mental clad dust and vermin proof floor mounting M.S. Channel Base with bottom amd top cable entreis Electrical control panel with TPN MCCB's (Four Pole 36 KA with thermal magnatic release) Switches Complete and instrument chamber etc. comolete in all respects. The instrument chamber shall be separate and shall comprise of fluse type digital metering system for phase to phase voltage and single phase voltage, current and other parameters (KVA, P.F, KW etc) in each phase with touch type selector switches foe different reading, instrument fuses, current transformer etc. The panel board shall have suitale capacity electerolytic alumininum busbars as per IS8623 or above istulated with heat dhrink sleeving and mounted on non hygroscopic supports such as CMC/BMC suppoert with deteachable side covers and shall be suitable for extension on the sides. The MCCB's shall be complete with suitable cable end boxes, compression glands and indicating lamp on incoming etc. (SOR-811/2018)

Outgoning - 63 Amp. MCCB-2 Nos, Cat B. Pannel Cubicle Type

Supply and Erraction of factory fabricated & wired mental clad dust and vermin proof floor mounting M.S. Channel Base with bottom amd top cable entreis Electrical control panel with TPN MCCB's (Four Pole 36 KA with thermal magnatic release) Switches Complete and instrument chamber etc. comolete in all respects. The instrument chamber shall be separate and shall comprise of fluse type digital metering system for phase to phase voltage and single phase voltage, current and other parameters (KVA, P.F, KW etc) in each phase with touch type selector switches foe different reading, instrument fuses, current transformer etc. The panel board shall have suitale capacity electerolytic alumininum busbars as per IS8623 or above istulated with heat dhrink sleeving and mounted on non hygroscopic supports such as CMC/BMC suppoert with deteachable side covers and shall be suitable for extension on the sides. The MCCB's shall be complete with suitable cable end boxes, compression glands and indicating lamp on incoming etc.SOR-812/2018

Outgoning - 100 Amp. MCCB-2 Nos, Cat B. Pannel Cubicle Type

63 Amp. MCCB-2 Nos, Cat B. Pannel Cubicle Type Market Rate.