Ghaziabad Development Authority Tender

Supply & Fixing of Brass Bib cock 15mm dia (DSR material Rate Items No. 1339)

Supply & Fixing of Orrisa Type W.C Pan of size 580mm (DSR: Materials Rate items no. 1954)

Providing Corrugated G.S Sheet Roofing including vertical/Curved surface Fixed with polymer coated J or hooks, bolts and nuts 8mm Diameter with bitumens and G.I limple washers or with G.I Limpet washers filled with white lead, including a coat of approved steel primer and two coats of approved paint on overlapping of sheets complete (upto any pitch in horizontal/vertical or curved surfaces), Excluding the cost of purlines, refters and trusses and including cutting to size and shape wherever required 1.00mm thick with zinc coating not less than 275g,/m2(12.1)

provinding and fixing false celling at all heights including providing and fixing of frame work made of special sections, power pressed from M.S. Sheets and galvanized with zinc coating of 120 gms/sqm (both side inclusive) as per IS 277 and consisting of angle cleats of size 25 mm wide x 1.6 mm thick with flanges of 27 mm and 37 mm, at 1200mm dia hangers of 25x10.0.50 mm of required length with nuts & bolts of required size and other end of angle hanger fixed with intermediate G.1 channels 45x15x0.9 mm running at the spacing of 1200 mm centre to centre, to which the ceiling section0.5 mm thick bottom wedge of 80 mm with tapered flanges of 26 mm each having lips 10.5mm, at 450 mm centre to centre, shall be fixed in direction perpendicular to G.I. intermediate channel with connedting clips made out of 2.64mm dia x 230mm long G.I. wire at every junction. including fixing perimeter channels 0.5mm thick27 mm high having flanges of 20 mm and 30 mm long, the perimeter of ceiling fixed to wall/partition with the help of rawl plugs at 450mm centre, with 25 mm long dry wall screws @ 230mm interval, including fixing of gypsum board to ceilling section and perimeter channel with the help of finishing to a flush finish of lapered and square edges of the board with recommended jointing compound, jointing tapes, finishing with jointing compound in a3 layers covering upto 150 mm on both sidesof joint and two coats of primer suitable for board

Providing & Fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with EPDM rubber/neoprene gastet etc. compete as per the architectural drawings and the directions and the directions of engineer-in-charge. (Cost of aluminium snap beading shall be pais in basic item):(21.3)