Bareilly Development Authority Tender
If you're a registered bidder for etender UP and want to inquire about any e-tender UP government has posted, this is your stop. No need to enter every detail on the website of <a href="https://etender.up.nic.in">etender.up.nic.in</a> - BidAssist filters will help you find the exact UP etender you're looking for. Read to learn how to search & bid for etender UP.
Bareilly Development Authority - BDA Tender
Civil And Construction
Building Construction
Eprocure
Opening Date26 Jul 2024
Closing DateCancelled
Tender Amount₹ 8,18,20,930
Costs
EMD
₹ 16,36,000Document Cost
₹ 15,000Tender Fee
Refer Documents
Description
Scription for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user
Contact
Tender Id
2024_BDAUP_941129_1Tender No
T-12/2024/6Tender Authority
Bareilly Development Authority ViewPurchaser Address
-Website
http://http://www.bdainfo.org/
GEM & Bid Advisory Services
Get portal registration, tender bidding, product/service listing or vendor/MSME certification services at a nominal cost
Documents
BOQ Items
Providing & laying cement concrete 1:4:8 (1 Cement : 4 coarse sand (zone-III) derived from natural sources : 8 graded stone aggregate 40 mm nominal size derived from natural sources)
D.S.R. Item No. 4.1.8 ( Rate: 6812.00x0.735x109/107)+1%=5151.41
321.2
1654632
5151.41
C.C. 1:2:4 (1 cement : 2 coarse sand (zone-III) derived from natural sources : 4 graded stone aggregate 20 mm nominal size derived from natural sources)
D.S.R. Item No. 4.1.3 ( Rate: 7878.50x0.735x109/107)+1%=5957.92
237.6
1415601
5957.92
Providing and laying in position ready mixed or site batched design mix cement concrete for reinforced cement concrete work; using coarse aggregate and fine aggregate derived from natural sources, Portland Pozzolana / Ordinary Portland /Portland Slag cement, admixtures in recommended proportions as per IS: 9103 to accelerate / retard setting of concrete, to improve durability and workability without impairing strength; including pumping of concrete to site of laying, curing, carriagefor all leads; but excluding the cost of centering, shuttering, finishing and reinforcement as per direction of the engineer-in-charge; for the following grades of concrete. Note: Extra cement up to 10% of the minimum specified cement content in design mix shall be payable separately. In case the cement content in design mix is more than 110% of the specified minimum cement content, the contractor shall have discretion to either re-design the mix or bear the cost of extra cement.
Concrete of M25 grade with minimum cement content of 350 kg /cum All works upto plinth level RCC as in fdns and footings of colums and plinth beam and bases of column. DSR Item No. 5.33.1.1 (Rate: 9504.75x0.735x109/107)+1%=7187.74
316.24
2273050
7187.74
Providing and laying in position ready mixed or site batched design mix cement concrete for reinforced cement concrete work; using coarse aggregate and fine aggregate derived from natural sources, Portland Pozzolana / Ordinary Portland /Portland Slag cement, admixtures in recommended proportions as per IS: 9103 to accelerate / retard setting of concrete, to improve durability and workability without impairing strength; including pumping of concrete to site of laying, curing, carriage for all leads; but excluding the cost of centering, shuttering, finishing and reinforcement as per direction of the engineer-in-charge; for the following grades of concrete.
Note: Extra cement up to 10% of the minimum specified cement content in design mix shall be payable separately. In case the cement content in design mix is more than 110% of the specified minimum cement content, the contractor shall have discretion to either re-design the mix or bear the cost of extra cement.
All works above plinth level upto floor V level Concrete of M25 grade with minimum cement content of 330 kg /cum (level 1 to lvl-5) D.S.R. Item No. 5.33.2.1 ( Rate: 9860.40x0.735x109/107)+1%=7456.69
514.97
3839971
7456.69
Providing and laying cement concrete in retaining walls, return walls, walls (any thickness) including attached pilasters, columns, piers, abutments, pillars, posts, struts, buttresses, string or lacing courses, parapets, coping, bed blocks, anchor blocks, plain window sills, fillets, sunken floor etc., up to floor five level, excluding the cost of centering, shuttering and finishing: 1:1½:3 (1 cement : 1½ coarse sand (zone-III) derived from natural sources : 3 graded stone aggregate 20 mm nominal
size derived from natural sources)..
DSR Item No. 4.2.2 ( Rate: 10357.55x0.735x109/107)+1%=7832.65
20.64
161665
7832.65
Mild steel or iron in plain work such as reinforced concrete or reinforced brick work (when not included in an overall rates) wrought to required shape as necessary including bending for proper completion of the work and including supply of steel its wastage and over lapping and hooks and authorised overlapping shall be measured . D.S.R. Item No. 5.22.1 ( Rate: 107.10x0.735x109/107)+1%=80.99
105188.75
8519236
80.99
Centering and shuttering including strutting, propping etc. and removal of form for footings/PB, rough finished surface of conc. D.S.R. Item No. 5.9.1 ( Rate: 392.15x0.735x109/107)+1%=296.55
557.16
165225
296.55
Centering and shuttering including strutting, propping etc. and removal of form for columns, pillers, piesr, abutment , post and struts
D.S.R. Item No. 5.9.6 ( Rate: 961.30x0.735x109/107)+1%=726.96)
990.14
719792
726.96
Centering and shuttering including strutting, propping etc. and removal of form for lintels, beams, plinth beams, girders, bressumers and cantilevers
D.S.R. Item No. 5.9.5 ( Rate: 736.40x0.735x109/107)+1%=556.88)
1117.28
622190
556.88
Centering and shuttering including strutting, propping etc. and removal of form for suspended floors, roof , landings, balconies, acessess platform
D.S.R. Item No. 5.9.3 ( Rate: 927.25x0.735x109/107)+1%=701.21)
2587.4
1814310
701.21
Centering and shuttering including strutting, propping etc. and removal of form for Walls (any thickness) including attached pilasters, butteresses, plinth and string courses etc.
D.S.R. Item No. 5.9.2 ( Rate: 842.50x0.735x109/107)+1%=637.12)
227.23
144772
637.12
Brick work in foundation 1st class b/work in 1:4cement and couarse sand mortar in fdn and plinth incl. supply of all materials , labour and t& P required for proper completion of the work
D.S.R. Item No. 6.2.1 (Rate: 6504.90x0.735x109/107)+1%=4919.17)
131.14
645099
4919.17
Brick work in SUPER STRUCTURE in 23 cm thk wall with 1:4 cement and coarse sand incl. all materials labour annd t&p etc. for proper completion of work.
D.S.R. Item No. 6.4.1 ( Rate: 9344.35x0.735x109/107)+1%=7066.44)
425.85
3009243
7066.44
Class 150 Brick work in 1:3 cement and Coarse Sand of 1.25 finentss modulusbut in Parapet including necessary cutting and moulding of brick work as required and also including honey combed brick work in thickness of wall more than 12 cms.
D.S.R. Item No. 6.13.1 (Rate: 1150.50x0.735x109/107)+1%=870.04)
411.29
357838
870.04
12 mm thk plaster (1:4) with cement & Coarse Sand (Fair Face)
D.S.R. Item No. 13.4.1 (Rate: 357.35x0.735x109/107)+1%=270.24)
5199.67
1405158
270.24
15 mm cement plaster on rough side of single or half brick wall of mix: 1:4 (1 cement: 4 coarse sand)
D.S.R. 13.5.1 (Rate: 411.75x0.735x109/107)+1%=311.38)
2599.83
809535
311.38
Supplying and fixing rolling shutters of approved make, made of required size M.S. laths, interlocked together through their entire length and jointed together at the end by end locks, mounted on specially designed pipe shaft with brackets, side guides and arrangements for inside and outside locking with push and pull operation complete, including the cost of providing and fixing necessary 27.5 cm long wire springs
manufactured from high tensile steel wire of adequate strength
conforming to IS: 4454 - part 1 and M.S. top cover of required thickness for rolling shutters.
80x1.25 mm M.S. laths with 1.25 mm thick top cover
D.S.R. 10.6.1 (Rate: 3653.20x0.735x109/107)+1%=2762.64)
173.25
478627
2762.64
Providing and fixing ball bearing for rolling shutters.
D.S.R. Item No. 10.6.7 (Rate: 492.35x0.735x109/107)+1%=372.33)
66
24573
372.33
Providing and applying white cement based putty of average thickness 2 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete. DSR 13.80 ( Rate: 156.05x0.735x109/107)+1%=118.01)
5199.67
613613
118.01
Finishing walls with Acrylic Smooth exterior paint of required shade :-
New work (Two or more coat applied @ 1.67 ltr/10 sqm over and including base coat of water proofing cement paint applied @ 2.20 kg/10sqm.).
D.S.R. Item No. 13.46.1 (Rate: 160.60x0.735x109/107)+1%=121.45)
1795.39
218050
121.45
Distempering with oil bound washable distemper of approved brand and manufacture to give an even shade :
New work (two or more coats) over and including water thinnable priming coat with cement primer
D.S.R. Item No. 13.41.1 (Rate: 185.65x0.735x109/107)+1%=140.39)
3404.28
477926
140.39
Finishing with Epoxy paint (two or more coats) at all locations prepared and applied as per manufacturer's specifications including appropriate priming coat, preparation of surface, etc. complete. On steel work
D.S.R. Item No. 13.52.1 (Rate: 241.75x0.735x109/107)+1%=182.82)
365.9
66893
182.82
Providing and fixing M.S. Tubular frames for doors, windows, ventilators and cupboard with rectangular/ L-Type sections, made of 1.60 mm thick M.S. Sheet, joints mitred, welded and grinded finish, with profiles of required size, including fixing of necessary butt hinges and screws and applying a priming coat of approved steel primer.
Fixing with 15x3 mm lugs 10 cm long embedded in cement concrete block 15x10x10 cm of C.C. 1:3:6 (1 Cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size)
D.S.R. Item No. 10.15.1 (Rate: 195.20x0.735x109/107)+1%=147.62)
2885.8
426001
147.62
Providing and fixing ISI marked flush door shutters conforming to IS : 2202 (Part I) non-decorative type, core of block board construction with frame of 1st class hard wood and well matched commercial 3 ply veneering with vertical grains or cross bands and face veneers on both faces of shutters:
35 mm thick including ISI marked Stainless Steel butt hinges with necessary screws
D.S.R. Item No. 9.21.1 ( Rate: 2392.65x0.735x109/107)+1%=1809.38)
102.48
185425
1809.38
Extra for Providing and fixing flush doors with decorative veneering instead of non decorative ISI marked flush door shutters conforming to IS: 2202 (Part I)
On one side only
D.S.R. Item No. 9.22.1 (Rate: 478.00x0.735x109/107)+1%=361.48)
102.48
37044
361.48
Painting with synthetic enamel paint of approved brand and manufacture to give an even shade :
Two or more coats on new work
D.S.R. 13.62.1 (Rate: 226.25x0.735x109/107)+1%=171.10)
85.68
14659
171.1
Numbering of shops with letter/ No. writing including painting one coat of ready mixed priming paint and two coat of approved superior quality ready mixed paint including supply of all materials tools & plants etc required for proper completion of the work.
Market Rate (P.S.)
34
1360
40
Supply and fixing of following size of PVC conduit alongwith the accessories in recess including painting in case of surface conduit, or cutting the wall and making good the same in case of recessed conduit as required: 20 mm Dia D.S.R. 1.21.1 (Rate: 128.00x0.789x109/110)+1%=101.07)
152
15362
101.07
Supply and fixing of following size of PVC conduit alongwith the accessories in recess including painting in case of surface conduit, or cutting the wall and making good the same in case of recessed conduit as required: 25 mm Dia
D.S.R. 1.21.2 (Rate: 145.00x0.789x109/110)+1%=114.50)
1500
171750
114.5
Providing and fixing of junction box 200 x 250 mm
PWD SI No 154 elctrical SOR 2018
250
7750
31
Providing and laying Vitrified tiles in floor in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS:15622, of approved brand & manufacturer, in all
colours and shade, laid on 20 mm thick cement mortar 1:4 (1 cement: 4 coarse sand) jointing with grey cement slurry @3.3 kg/sqm including grouting the joints with white cement and matching pigments etc. The tiles must be cut with the zero chipping diamond cutter only . Laying of tiles will be done with the notch trowel, plier, wedge, clips of required thickness, leveling system and rubber mallet for placing the tiles gently and easily.
Double charge vitrified tile polished finish of size
(Make : Simpolo/Johnson)
Size of Tile 600 x 1200 mm
D.S.R. Item No. 11.41A.1.3 (Rate: 1577.15x0.735x109/107)+1%=1192.68)
427.91
510359
1192.68
Antiskid tiles
Providing and laying Vitrified tiles in floor in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08 and conforming to IS:15622, of approved brand & manufacturer, in all colours and shade, laid on 20 mm thick cement mortar 1:4 (1 cement: 4 coarse sand) jointing with grey cement slurry @ 3.3 kg/sqm including grouting the joints with white cement and matching pigments etc. The tiles must be cut with the zero chipping diamond cutter only . Laying of tiles will be done with the notch trowel, plier, wedge, clips of required thickness, leveling system and rubber mallet for placing the tiles gently and easily. Glazed Vitrified tiles Matt/Antiskid finish of size
600 x 600 mm (Make : Simpolo/Johnson)
DSR 11.41A.3.1 (Rate: 1464.85x0.735x109/107)+1%=1107.76)
423.47
469103
1107.76
Extra for grouting the joints of flooring tiles having joints of 3 mm width, using epoxy grout mix of 0.70 kg of organic coated filler of desired shade (0.10 kg of hardener and 0.20 kg of resin per kg), including filling / grouting and finishing complete as per direction of Engineer-in-charge.
Size of Tile 600x600 mm D.S.R. Item No. 11.48.2 (Rate: 309.05x0.735x109/107)+1%=233.71)
851.38
198976
233.71
Kota stone slab flooring over 20 mm (average) thick base laid over and jointed with grey cement slurry mixed with pigment to match the shade of the slab, including rubbing and polishing complete with base of cement mortar 1 : 4 (1 cement : 4 coarse sand) :
25 mm thick.
D.S.R. Item No. 11.26.1 (Rate: 1948.25x0.735x109/107)+1%=1473.32)
828.3
1220350
1473.32
Providing and laying in situ seven course water proofing treatment with APP (Atactic poly-propylene) modified Polymeric memberane over roof consisting of first coat of bitumen primer @ 0.40 litre per sqm, 2nd, 4th & 6th courses of bonding material @ 1.20 Kg/sqm, which shall consist of blown type bitumen of grade 85/25 conforming to IS : 702, 3rd and 5th layers of roofing membrane APP modified Polymeric membrane 1.5 mm thick of 2.25 Kg/sqm weight consisting of five layers prefabricated with centre core as 20 micron HMHDPE film sandwiched on both sides with polymeric mix and the polymeric mix is protected on both side with 20 micron HMHDPE film. 7th, the top most layer shall be finished with brick tiles of class designation 10 grouted with cement mortar 1:3 (1cement : 3 fine sand) mixed with 2% integral water proofing compound by weight of cement over a 12 mm layer of cement mortar 1:3 (1 cement : 3 fine sand) and finished neat (item of laying brick tiles shall be paid for separately).
DSR Item No. 14.86 (Rate: 730.55x0.735x109/107)+1%=552.46)
297.02
164091
552.46
Providing and fixing Glass mossaic tiles on finished plain wall surface of size 20 mm x 20 mm x 4 mm in all colour, design , fixing in customize design as per direction of Engineer-in- Charge. The glass mosaic tiles to be fixed on the wall surface with the help of approved adhesive applied at the rate of 2.5 kg per sqm and grouting of the same. The rate is inclusive of all operation, material and required pattern approved by Engineer-in-Charge: make: Visaza/ Italica
DSR Item No. 11.53 (Rate: 3891.15x0.735x109/107)+1%=2942.59)
178.53
525340
2942.59
Providing and laying flamed finish Granite stone flooring in required design and patterns, in linear as well as curvilinear portions of the building all complete as per the architectural drawings with 18 mm thick stone slab over 20 mm (average) thick base of cement mortar 1:4 (1 cement : 4coarse sand) laid and jointed with cement slurry and pointing with white cement slurry admixed with pigment of matching shade including rubbing, curing and polishing etc. all complete as specified and as directed by the Engineer-in-Charge :
Flamed finish granite stone slab Jet Black, Cherry Red, Elite Brown, Cat Eye or equivalent.
D.S.R. Item No. 11.55.1 (Rate: 3186.70x0.735x109/107)+1%=2409.86)
1323.94
3190510
2409.86
Grouting the joints of flooring tiles having joints of 3 mm width, using epoxy grout mix of 0.70 kg of organic coated filler of desired shade (0.10 kg of hardener and 0.20 kg of resin per kg), including Spacer, filling / grouting and finishing complete as per direction of Engineer-in-charge.
Size of Stone 600x600 mm
D.S.R. 11.48.2 (Rate: 309.05x0.735x109/107)+1%=233.71)
2152.24
503000
233.71
Providing and fixing Ist quality ceramic glazed wall tiles conforming to IS: 15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer-in-Charge, in skirting, risers of steps and dados, over 12 mm thick bed of cement mortar 1:3 (1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm, including pointing in white cement mixed with pigment of matching shade complete. (Make : Simpolo/Johnson)
DSR 8.31 (Rate: 1267.95x0.735x109/107)+1%=958.86)
293.81
281722
958.86
Providing and fixing 18 mm thick gang saw cut, mirror polished, premoulded and prepolished, machine cut for kitchen platforms, vanity counters, window sills, facias and similar locations of required size, approved shade, colour and texture laid over 20 mm thick base cement mortar 1:4 (1 cement : 4 coarse sand), joints treated with white cement, mixed with matching pigment, epoxy touch ups, including rubbing, curing, moulding and polishing to edges to give high gloss finish etc. complete at all levels plain white marble/ udaipiur green marble / zebra balck marble area of slab over 0.50 sqm
D.S.R. Item No. 8.2.2.2 (Rate: 5136.30x0.735x109/107)+1%=3884.20)
1446
5616553
3884.2
Extra for providing opening of required size & shape for wash basin/ kitchen sink in kitchen platform, vanity counter and similar location in marble/ Granite/stone work, including necessary holes for pillar taps etc. including moulding, rubbing and polishing of cut edges etc. complete. D.S.R. Item No . 8.5 (Rate: 978.70x0.735x109/107)+1%=740.12)
40
29604
740.12
Providing edge moulding to 18 mm thick marble stone counters, Vanities etc., including machine polishing to edge to give high gloss finish etc. complete as per design approved by Engineer-in-Charge.
Granite work
D.S.R. Item No. 8.3.2 (Rate: 510.95x0.735x109/107)+1%=386.39)
1950.6
753692
386.39
Stone tile (polished) work for wall lining over 12 mm thick bed of cement
mortar 1:3 (1 cement : 3 coarse sand) and cement slurry @ 3.3 kg/sqm
including pointing in white cement complete.
8mm thick
D.S.R. Item No. 8.9.1.2 (Rate: 3617.55x0.735x109/107)+1%=2735.68)
455.23
1245363
2735.68
Cement concrete flooring 1:2:4 (1 cement : 2 coarse sand : 4 graded
stone aggregate) finished with a floating coat of neat cement, including
cement slurry, but excluding the cost of nosing of steps etc. complete.
40 mm thick with 20 mm nominal size stone aggregate
D.S.R. Item No. 11.3.1 (Rate: 614.20x0.735x109/107)+1%=464.47)
205.6
95495
464.47
Design supply & installation of suspended Spider Glazing system designed to withstand the wind pressure as per IS 875 (Part-III). The Suspended System held with Spider Fittings of SS-316 Grade Steel of approved manufacturer with glass panel having 12 mm thick clear toughened glass held together with SS- 316 Grade Stainless steel Spider & bolt assembly with laminated glass fins 21 mm thick. The Glass fins and glass panel assembly shall be connected to Slab/ beams by means of SS- 316 Grade stainless steel brackets & Anchor bolts and at the bottom using SS channel of 50x25x2mm using fastener & anchor bolts, non staining weather sealants of approved make, Teflon/ nylon bushes and separators to prevent bi-metallic contacts, all complete to perform as per specification and approved drawings. The complete system to be designed to accommodate thermal expansion & seismic movements etc. The joints between glass panels (6 to 8 mm) and gaps at the perimeter & in U channel of the assembly to be filled with non staining weather sealant, so as to make the entire system fully water proof & dust proof. The rate shall include all design, Engineering and shop drawing including approval from structural designer, labour, T&P, scaffolding, other incidental charges including wastage, enabling temporary services all fitting fixers nut bolts, washer, Buffer plates, fastener, anchors, SS channel laminated glass etc. all complete. For the purpose of payment, actual elevation area of Glazing including thickness of joints and the portion of Glass panel inside the SS channel shall be measured.
D.S.R. Item No. 25.8 (Rate: 9502.35x0.735x109/107)+1%=7185.92)
202.72
1456729
7185.92
Providing and fixing bright finished brass 100 mm mortice latch and lock with 6 levers and a pair of lever handles of approved quality with necessary screws etc. complete.
DSR 9.76 (Rate: 854.65x0.735x109/107)+1%=646.31)
34
21974
646.31
Providing and fixing bright finished brass 100 mm mortice latch with one dead bolt and a pair of lever handles of approved quality with necessary screws etc. complete.
DSR 9.77 (Rate: 726.60x0.735x109/107)+1%=549.70)
12
6593
549.47
Providing and laying integral cement based water proofing treatment including preparation of surface as required for treatment of roofs, balconies, terraces etc consisting of following operations: DSR 22.7.1
(a) Applying a slurry coat of neat cement using 2.75 kg/sqm of cement admixed with water proofing compound conforming to IS. 2645 and approved by Engineer-in-charge over the RCC slab including adjoining walls upto 300 mm height including cleaning the surface before treatment.
(b) Laying brick bats with mortar using broken bricks/brick bats 25 mm to 115 mm size with 50% of cement mortar 1:5 (1 cement : 5 coarse sand) admixed with water proofing
compound conforming to IS : 2645 and approved by Engineerin- charge over 20 mm thick layer of cement mortar of mix 1:5 (1 cement :5 coarse sand ) admixed with water proofing compound conforming to IS : 2645 and approved by Engineerin- charge to required slope and treating similarly the adjoining walls upto 300 mm height including rounding of junctions of walls and slabs.
(c) After two days of proper curing applying a second coat of cement slurry using 2.75 kg/ sqm of cement admixed with water proofing compound conforming to IS : 2645 and
approved by Engineer-in-charge.
(d) Finishing the surface with 20 mm thick jointless cement mortar of mix 1:4 (1 cement :4 coarse sand) admixed with water proofing compound conforming to IS : 2645 and approved by Engineer-in-charge including laying glass fibre cloth of approved quality in top layer of plaster and finally finishing the surface with trowel with neat cement slurry and making pattern of 300x300 mm square 3 mm deep.
(e) The whole terrace so finished shall be flooded with water for a minimum period of two weeks for curing and for final test.“All above operations to be done in order and as directed and specified by the Engineer-in-Charge :
With average thickness of 120 mm and minimum thickness at khurra as 65 mm.
D.S.R. 22.7.1 (Rate:1684.60x0.735x109/107)+1%=1273.94)
2096.36
2670636
1273.94
Providing gola 75x75 mm in cement concrete 1:2:4 (1 cement : 2 coarsesand : 4 stone aggregate 10 mm and down gauge), including finishing with cement mortar 1:3 (1 cement : 3 fine sand) as per standard design :In 75x75 mm deep chase D.S.R 2021No 12.21.1 (Rate: 305.15x0.735x109/107)+1%=230.76)
275
63459
230.76
Making khurras 45x45 cm with average minimum thickness of 5 cm cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate of 20 mm nominal size) over P.V.C. sheet 1 m x1 m x 400 micron, finished with 12 mm cement plaster 1:3 (1 cement : 3 coarse sand) and a coat of neat cement, rounding the edges and making and finishing the outlet complete. D.S.R. No.12.22.1 (Rate: 298.25x0.735x109/107)+1%=225.54)
24
5412
225.54
Providing and fixing false ceiling at all height including providing and fixing of frame work made of special sections, power pressed from M.S. sheets and galvanized with zinc coating of 120 gms/sqm (both side inclusive) as per IS : 277 and consisting of angle cleats of size 25 mm wide x 1.6 mm thick with flanges of 27 mm and 37mm, at1200 mm centre to centre, one flange fixed to the ceiling with dash fastener 12.5 mm dia x 50mm long with 6mm dia bolts, other flange of cleat fixed to the angle hangers of 25x10x0.50 mm of required length with nuts & bolts of required size and other end of angle hanger fixed with intermediate G.I. channels 45x15x0.9 mm running at the spacing of 1200 mm centre to centre, to which the ceiling section 0.5 mm thick bottom wedge of 80 mm with tapered flanges of 26 mm each having lips of 10.5 mm, at 450 mm centre to centre, shall be fixed in a direction perpendicular to G.I.intermediate channel with connecting clips made out of 2.64 mm dia x 230 mm long G.I. wire at every junction, including fixing perimeter channels 0.5 mm thick 27 mm high having flanges of 20 mm and 30 mm long, the perimeter of ceiling fixed to wall/partition with the help of rawl plugs at 450 mm centre, with 25mm long dry wall screws @ 230 mm interval, including fixing of gypsum board to ceiling section and perimeter channel with the help of dry wall screws of size 3.5 x 25 mm at 230 mm c/c, including jointing and finishing to a flush finishof tapered and square edges of the board with recommended jointing compound , jointing tapes , finishing with jointing compound in 3 layers covering upto 150 mm on both sides of joint and two coats of primer suitable for board, all as per manufacturer's specification and also including the cost of making openings for light fittings, grills, diffusers, cutouts made with frame of perimeter channels suitably fixed, all complete as per drawings, specification and direction of the Engineer in Charge but excluding the cost of painting with : 12.5 mm thick tapered edge gypsum moisture resistant board Ground Floor
D.S.R. ITEM No. 12.45.3 (Rate: 1529.10x0.735x109/107)+1%=1156.34)
1356.35
1568401
1156.34
Providing 10 mm thick plaster of Paris (gypsum anhydrous) ceiling up to a height of 5 m above floor level. The thickness of POP ceiling shall be maximum 12mm & will include all the curves, coves, etc as per architectural design. The frame work shall be treated with one coat of primer of zinc coating of grade 350 as per IS 277 and shall be true to planers or slopes as specified.
The joints in the expanded metal shall be provided only under the main steel frame work. The plaster of Paris shall be of calcium sulphate semi-hydrate variety, its fineness shall be such that when sieved through a sleeve of IS sieve designations 0.05mm for 5 min after drying the residue left on it shall not be more than 1% by weight. It shall not be too quick setting. Initial setting time shall not be less than 13 min. The average compressive strength of material determined by testing 5 cm cubes after removal from mould. After 24 hours and drying in an over at 40 c till weight of the cubes is constant, Shall not be less than 84 Kg/sq.m.
The material will be mixed with water to a workable consistency; plaster of Paris shall be applied to the underside of expanded metal in suitably sized panels and finished to a smooth surface by steel trowels. The finished surface shall be smooth and true to planed slopes or curved as required. only frame work.
D.S.R. 12.31.1 (Rate: 1718.95x0.735x109/107)+1%=1299.91)
400
519964
1299.91
Providing and fixing false ceiling at all height including providing and fixing of frame work made of special sections, power pressed from M.S. sheets and galvanized with zinc coating of 120 gms/sqm (both side inclusive) as per IS : 277 and consisting of angle cleats of size 25 mm wide x 1.6 mm thick with flanges of 27 mm and 37mm, at 1200 mm centre to centre, one flange fixed to the ceiling with dash fastener 12.5 mm dia x 50mm long with 6mm dia bolts, other flange of cleat fixed to the angle hangers of 25x10x0.50 mm of required length with nuts & bolts of required size and other end of angle hanger fixed with intermediate G.I. channels 45x15x0.9 mm running at the spacing of 1200 mm centre to centre, to which the ceiling section 0.5 mm thick bottom wedge of 80 mm with tapered
flanges of 26 mm each having lips of 10.5 mm, at 450 mm centre to centre, shall be fixed in a direction perpendicular to G.I. intermediate channel with connecting clips made out of 2.64 mm dia x 230 mm long G.I. wire at every junction, including
fixing perimeter channels 0.5 mm thick 27 mm high having flanges of 20 mm and 30 mm long, the perimeter of ceiling fixed to wall/partition with the help of rawl plugs at 450 mm centre, with 25mm long dry wall screws @ 230 mm interval, including fixing of gypsum board to ceiling section and perimeter channel with the help of dry wall screws of size 3.5 x 25 mm at 230 mm c/c, including jointing and finishing to a flush finish of tapered and square edges of the board with recommended jointing compound , jointing tapes , finishing with jointing compound in 3 layers covering upto 150 mm on both sides of joint and two coats of primer suitable for board, all as per manufacturer's specification and also including the cost of making openings for light fittings, grills, diffusers,
cutouts made with frame of perimeter channels suitably fixed, all complete as per drawings, specification and direction of the Engineer in Charge but excluding the cost of painting with : For False ceiling with POP.
Analysis
400
345052
862.63
Design of overall Tensile structure for Umbrella including membrane (fabric) & Steel. Supply of fabricated steel as per design, Erection, Painting of Steel structure & Installation & tensioning of Membrane (Fabric). Wind load of 44 m/s. 1.38 Kn/Sqm. Designing, Supply, Fabrication & Erection of Structural steel works with necessary Gusset Plates, Stiffener plates, Brackets, Bolts, Cleats etc., including painting. Structural frame shall be of Factory fabricated from structural steel using standard make IS 1239 pipes. YST240 the steel design shall be as per IS code 800. All segments of the assembly will be welded properly By mig weld & all sharp edges and corners are grinded. The steel shall be enamel painted with two coats at site (with brush) over zinc chromate primer for good finish.APPROVED MAKE: JINDAL/ APPOLLO/ SURYA/
NEUZONE,Designing, Supply Fabrication & Installation of PVDF fabric to be used is Serge Ferrari, France Flexilight 902S2(950 gsm) of tensile
strength 420/400 daN/5cm and 832S2(850 gsm) of tensile strength 420/420daN/5cm. Steel cables, endplates, Tensioning hardware and all accessories . The fabric used for the tensile structure to be analyzed for its strength requirement and behaviour in tensile engineering software Ixcube and to be chosen after deriving through analysis. Fabric pattering is done on Ixcube software considering fabric prestress, structure form, welding joints and fabric elongation properties. All fabric patterns are plotted on fabric rolls by plotter and welded on high frequency welding machine in dust proof conditions. Fabric warranty period will be - 10 years. Colour of fabric are white and Grey Approved Make: Serge Ferrari, France Flexilight 902S2(white color) & 832S2(grey colour) both sides PVDF coated PVC fabric.All Structural wire rope shall be of 10 mm dia steel core galvanized 6/19, conforming to IS Steel Cable Manual requirement. End plate should be hot dip galvanized. All Cables and end fitting shall be delivered clean & dry. Swaged end fittings, Tensioning hardware (Viz. fork terminal, turn Etc) are galvanized & inted.Approved Makes: USHA MARTIN/DP WIRES complete as per drawing for finished item of work and as directed by the Engineer-in-Charge Market Rate
195
848250
4350
Parking & Pathway Area
Earth work in excavation by mechanical means (Hydraulic excavator) / manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan), including dressing of sides and ramming of bottoms, lift upto 1.5 m, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m.
All kinds of soil.
D.S.R. Item No. 2.8.1 ( Rate: 260.30x0.735x109/107)+1%=196.85)
35.74
7035
196.85
Providing & laying cement concrete 1:4:8 (1 Cement : 4 coarse sand (zone-III) derived from natural sources : 8 graded stone aggregate 40 mm nominal size derived from natural sources)
D.S.R. Item No. 4.1.8 ( Rate: 6812.00x0.735x109/107)+1%=5151.41)
10.21
52595
5151.41
Brick work in foundation 1st class b/work in 1:4cement and couarse sand mortar in fdn and plinth incl. supply of all materials , labour and t& P required for proper completion of the work
D.S.R. Item No. 6.2.1 (Rate: 6504.90x0.735x109/107)+1%=4919.17)
10.07
49536
4919.17
Construction of granular sub base (G.S.B.) by providing close graded material, spreading in uniform layers with motor grader on prepared surface, mixing by mix in place method with rotavator at OMC, and compacting with vibratory roller to achieve the desired density, compete at per clause 401. (Analysis Rate)
170.27
602926
3541
Providing and laying factory made chamfered edge Cement Concrete paver blocks in footpath, parks, lawns, drive ways or light traffic parking etc, of required strength, thickness & size/ shape, made by table vibratory method using PU mould, laid in required colour & pattern over 50mm thick compacted bed of sand, compacting and proper embedding/laying of inter locking paver blocks into the sand
bedding layer through vibratory compaction by using plate vibrator,filling the joints with sand and cutting of paver blocks as per required size and pattern, finishing and sweeping extra sand. complete all as per direction of Engineer-in-Charge.
80 mm thick C.C. paver block of M-30 grade with approved
color design and pattern.
D.S.R. Item No. 16.91.2 ( Rate: 1091.50x0.735x109/107)+1%=825.42)
1135.16
936983
825.42
Providing and laying at or near ground level factory made kerb stone of M-25 grade cement concrete in position to the required line, level and curvature, jointed with cement mortar 1:3 (1 cement: 3 coarse sand), including making joints with or without grooves (thickness of joints except at sharp curve shall not to more than 5mm), including making drainage opening wherever required complete etc. as per direction of Engineer-in-charge (length of finished kerb edging shall be measured for payment). (Precast C.C. kerb stone shall be approved
by Engineer-in-charge).
D.S.R. Item No. 16.69 ( Rate:10117.60x0.735x109/107)+1%=7651.19)
11.12
85081
7651.19
Boundary Wall Earth work in excavation by mechanical means (Hydraulic excavator) / manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan), including dressing of sides and ramming of bottoms, lift upto 1.5 m, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m.
All kinds of soil.
D.S.R. Item No. 2.8.1 ( Rate: 260.30x0.735x109/107)+1%=196.85)
361.13
71088
196.85
Providing & laying cement concrete 1:4:8 (1 Cement : 4 coarse sand (zone-III) derived from natural sources : 8 graded stone aggregate 40 mm nominal size derived from natural sources)
D.S.R. Item No. 4.1.8 ( Rate: 6812.00x0.735x109/107)+1%=5151.41)
29.25
150678
5151.41
Providing and laying in position ready mixed or site batched design mix cement concrete for reinforced cement concrete work; using coarse aggregate and fine aggregate derived from natural sources, Portland Pozzolana / Ordinary Portland /Portland Slag cement, admixtures in recommended proportions as per IS: 9103 to accelerate / retard setting of concrete, to improve durability and workability without impairing strength; including pumping of concrete to site of laying, curing, carriagefor all leads; but excluding the cost of centering, shuttering, finishing and reinforcement as per direction of the engineer-in-charge; for the following grades of concrete. Note: Extra cement up to 10% of the minimum specified cement content in design mix shall be payable separately. In case the cement content in design mix is more than 110% of the specified minimum cement content, the contractor shall have discretion to either re-design the mix or bear the cost of extra cement.
Concrete of M25 grade with minimum cement content of 350 kg /cum All works upto plinth level RCC as in fdns and footings of colums and plinth beam and bases of column. D.S.R. Item No. 5.33.1.1 ( Rate: 9504.75x0.735x109/107)+1%=7187.74)
78.12
561506
7187.74
Providing and laying in position ready mixed or site batched design mix cement concrete for reinforced cement concrete work; using coarse aggregate and fine aggregate derived from natural sources, Portland Pozzolana / Ordinary Portland /Portland Slag cement, admixtures in recommended proportions as per IS: 9103 to accelerate / retard setting of concrete, to improve durability and workability without impairing strength; including pumping of concrete to site of laying, curing, carriage for all leads; but excluding the cost of centering, shuttering, finishing and reinforcement as per direction of the engineer-in-charge; for the following grades of concrete.
Note: Extra cement up to 10% of the minimum specified cement content in design mix shall be payable separately. In case the cement content in design mix is more than 110% of the specified minimum cement content, the contractor shall have discretion to either re-design the mix or bear the cost of extra cement.
All works above plinth level upto floor V level Concrete of M25 grade with minimum cement content of 330 kg /cum (level 1 to lvl-5) D.S.R. Item No. 5.33.2.1 ( Rate: 9860.40x0.735x109/107)+1%=7456.69)
33.63
250768
7456.69
Mild steel or iron in plain work such as reinforced concrete or reinforced brick work (when not included in an overall rates) wrought to required shape as necessary including bending for proper completion of the work and including supply of steel its wastage and over lapping and hooks and authorised overlapping shall be measured . D.S.R. Item No. 5.22.1 ( Rate: 107.10x0.735x109/107)+1%=80.99)
121.74
9859
80.99
Centering and shuttering including strutting, propping etc. and removal of form for footings/PB, rough finished surface of conc. D.S.R. Item No. 5.9.1 ( Rate: 392.15x0.735x109/107)+1%=296.55)
160.5
47596
296.55
Brick work in foundation 1st class b/work in 1:4cement and couarse sand mortar in fdn and plinth incl. supply of all materials , labour and t& P required for proper completion of the work
D.S.R. Item No. 6.2.1 ( Rate: 6504.90x0.735x109/107)+1%=4919.17)
44.62
219493
4919.17
Brick work in SUPER STRUCTURE in 23 cm thk wall with 1:4 cement and coarse sand incl. all materials labour annd t&p etc. for proper completion of work.
D.S.R. Item No. 6.4.1 ( Rate: 9344.35x0.735x109/107)+1%=7066.44)
135.91
960399
7066.44
12 mm thk plaster (1:4) with cement & Coarse Sand (Fair Face)
D.S.R. Item No. 13.4.1 ( Rate: 357.35x0.735x109/107)+1%=270.24)
661.5
178763
270.24
Providing and applying white cement based putty of average thickness 2 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete. DSR 13.80 ( Rate: 156.05x0.735x109/107)+1%=118.01)
661.5
78063
118.01
Finishing walls with Acrylic Smooth exterior paint of required shade :-
New work (Two or more coat applied @ 1.67 ltr/10 sqm over and including base coat of water proofing cement paint applied @ 2.20 kg/10sqm.).
D.S.R. Item No. 13.46.1 (Rate: 160.60x0.735x109/107)+1%=121.45)
661.5
80339
121.45
Steel work in built up tubular (round, square or rectangular hollow tubes etc.) trusses etc., including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete. D.S.R. Item No. 10.16.1 ( Rate: 194.40x0.735x109/107)+1%=147.01)
1560
229335
147.01
Kids Play Area
Providing & Fixing Straight Bench ( L- 5Feet) as per catlog code no. SB-02, Page No. 3
(P.S.)
20
375000
18750
Poviding & Fixing Designer dust bin (Monkey) as per Catlog code no -DB -03, Page No. 4
(P.S.)
20
275000
13750
Providing & Fixing See-Saw 2 Seater as per Catlog Code No. SS-01, Page No.8
(P.S.)
8
150000
18750
Providing & Fixing Horse (dumi) as per Catlog code no- PDH-01 Page no. 10
(P.S.)
4
406250
101562.5
Providing & Fixing Merry-Go-Round (Mickey Mouse) as per Catlog Code No. RJ-01, Page no. 11
(P.S.)
4
281250
70312.5
Providing & Fixing Swing ( Double Seater) as per Catlog Code No. SW-02, Page No. 14
(P.S.)
4
131250
32812.5
Providing & Fixing two way Slider make by modcon, austin.
(P.S.)
2
590000
295000
Landscaping
Trenching in ordinary soil up to a depth of 60 cm including removal and stacking of serviceable materials and then disposing of surplus soil, by spreading and neatly levelling within a lead of 50 m and making up the trenched area to proper levels by filling with earth or earth mixed with sludge or / and manure before and after flooding trench with water (excluding cost of imported earth, sludge or manure).
2.1 (dsr hort. 2020) ( Rate: 78.10x0.90x109/110)+1%=70.35)
792
55717
70.35
Supplying and stacking of good earth at site including royalty and carriage upto 5 km lead complete (earth measured in stacks will be reduced by 20% for payment).
2.2 (dsr hort. 2020) ( Rate: 515.60x0.90x109/110)+1%=464.42)
528
245213
464.42
Supplying and stacking sludge at site including royalty and carriage upto 5 km lead complete (sludge measured in stacks will be reduced by 8% for
payment).
2.3 (dsr hort. 2020) (Rate: 294.00x0.90x109/110)+1%=264.82)
264
69912
264.82
Supplying and stacking at site dump manure from approved source, including carriage upto 5 km lead complete (manure measured in stacks will be reduced by 8% for payment) : Screened through sieve of I.S. designation 20 mm
2.4.1 (dsr hort. 2020) (Rate: 254.15x0.90x109/110)+1%=228.92)
264
60434
228.92
Supply & plantation of Trees upto 8ft to 10ft height well settled, all indigenous varieties (local) as per listed below, location and quantities shall be as per drawing
Mangifera Indica (Mango), Bacopa Monnieri (Brahmi), Terminalia Tomentosa (Asna), Azadirachta Indica (Neem) & Bambusa Bambos (Baans)
Terminalia Arjuna (Arjun), Tectoria Grandis (Sagaun), Shorea Robusta (Saal), Stereospermum Tetragonum (Padal), Anogeissus Latifolia (Bakli), Madhuca Longifolia (Mahua) & Diospyros Malabarica (Gaub) Saraca asoca (ashok), Ficus religiosa (peepal), Ficus benghalensis (bargad), Aegle marmelos (bel) & Phyllanthus emblica (aonla) Pterocarpus Santalinus (rakta chandan), Butea monosperma (dhaak), Artocarpus altilis (kathal) & Santalum album (chandan) Saraca Asoka (Sita Ashok), True Cinnamon (Nag Kesar), Mangolia Champaca (Champa) & Mimusops Elengi (Maulsari) Saussurea Ggossypiphora (Mratyusanjeevani), Azadirachta Indiac (Neem) & Adiantum Venustum (Hansraj)
Market Rate (P.S.)
350
185500
530
Anti termite treatment of lawn area through premise 30.50% I P. one liter premise diluted in
499 liters water and applying solution @ 1.00 litre solution per sqm lawn or bed area. (two application) i/c cost of chemical) and as per direction of officer-in-charge.and as per direction
of officer-in-charge.
2.56 (dsr hort. 2020) (Rate: 7.55x0.90x109/110)+1%=6.80)
1760
11968
6.8
Providing and laying Neelgiri/Mexican grass turf with earth 50mm to 60mm thickness of existing ground prepared with proper level and ramming with tools wooden (Dhurmos) and than rolling the surface with light roller make the surface smoothen and light waterning with sprinkler and maintenance for 30 days or more till the grass establish properly, as per direction of officer-in-charge.
2.33 (dsr hort. 2020) (Rate: 214.40x0.90x109/110)+1%=193.12)
1760
339891
193.12
Preparation of beds for hedging and shrubbery by excavating 60 cm deep and trenching the excavated base to a further depth of 30 cm, refilling the excavated earth after breaking clods and mixing with sludge or manure in the ratio of 8:1 (8 parts of stacked volume of earth after reduction by 20%: one part of stacked volume of sludge or manure after reduction by 8%), flooding with water, filling with earth if necessary, watering and finally fine dressing, leveling etc. including stacking and disposal of materials declared unserviceable and surplus earth by spreading and leveling as directed, within a lead of 50 m, lift up to 1.5 m complete (cost of sludge, manure or extra earth to be paid for separately) 2.13 (dsr hort. 2020) (Rate: 222.85x0.90x109/110)+1%=200.73)
352
70656
200.73
Supplying and stacking of well decayed cattle manure at site including royalty and carriage upto 5 k.m.lead complete (Cattle manure measured in stacks will reduced by 8% for Payment).
2.25 (dsr hort. 2020) (Rate: 247.50x0.90x109/110)+1%=222.93)
176
39235
222.93
Providing and stacking of plant Mogra of height 25 to 30 cm., 2 to 3 branch in earthen pots of size 20 cm Earthen Pot/Plastic Pot and as per direction of the officer-in-charge. 4.88 (dsr hort. 2020) (Rate: 46.15x0.90x109/110)+1%=41.57)
180
7482
41.57
Providing and Displaying Budded Rose (H.T. variety) 3 to 4 healthy branch 30 cm and above ht. well developed with one and above flower plant in 20 cm Earthen Pot, as per direction of the officer-in-charge. 4.91 (dsr hort. 2020) (Rate: 32.80x0.90x109/110)+1%=29.54)
150
4431
29.54
Providing and Displaying Cycus cirsnallis well developed with fresh & healthy 35 to 40 lush green leaves in 40 cm Cement Pot as per direction of the officer-in-charge. 5.13 (dsr hort. 2020) (Rate: 1947.50x0.90x109/110)+1%=1754.18)
10
17541
1754.18
Providing and Displaying Cyprus golden well shaped developed with good colored foliage fresh & healthy 60 to 75 cm ht in 30 cm Earthen Pot as per direction of the officer-in-charge. 5.17 (dsr hort. 2020)
60
23266
387.77
Providing and Displaying Ficus Starlight with fresh, healthy and attractive foliage 45 to 60 cm spread 75 to 90 cm ht., specimen bushy ,in 35 cm Cement Pot as per direction of the officer-in-charge. 5.28 (dsr hort. 2020)
120
93063
775.53
Providing and stacking of Alpinia Variegated (three in one) having ht. 30 cm and above, with fresh and healthy variegated foliage in 25 cm size of Earthen Pot/Plastic Pot & as per direction of the officer-in-charge. 6.1 (dsr hort. 2020)
60
6539
108.99
Providing and stacking of Asparagus marrie, well developed 15 to 20 leaves, full of branches and foliage in 25 cm size of Earthen Pot/Plastic Pot & as per direction of the officer-in-charge. 6.3 (dsr hort. 2020)
90
4458
49.54
Providing and stacking of Cuphea chinensis of ht. 20-30 cm full of branches and healthy foliage in 15 cm size of Earthen Pot/Plastic Pot & as per direction of the officer-in-charge. 6.10 (dsr hort. 2020)
75
1350
18.01
Providing and stacking of Euphorbia milli hybrid variety, having ht. 30 cm to 45 cm with multi branch, full bloom, fresh and healthy leaves in 30 cm size of Earthen Pot/Plastic Pot & as per direction of the officer-in-charge.
6.14 (dsr hort. 2020)
60
5674
94.58
Providing and stacking of Ophiopogon jaburan (variegated) ,full of variegated leaves in Earthen Pot/Plastic Pot of size 20 cm. as per direction of the officer-in-charge. 6.21 (dsr hort. 2020)
60
1621
27.02
Providing and stacking of Alstonia scholaris of height 150-165 cm. in bagof size 25 cm as per direction of the officer-in-charge. 7.4 (dsr hort. 2020)
45
2634
58.55
Providing and stacking of Butea frondosa (Flame of Forest) of height 60-75 cm. in big poly bags of size 25 cm as per direction of the officer-in-charge.
7.13 (dsr hort. 2020)
45
2229
49.54
Providing and stacking of Cassia siamea of height 150-165 cm. in big poly bags of size 25 cm as per direction of the officer-in-charge. 7.17 (dsr hort. 2020)
45
2634
58.55
Providing and stacking of lotus flower of height 150-165 cm. in bag of size 25 cm as per direction of the officer-in-charge. Mr
30
20266
675.55
Providing and stacking of Bauhinia tomentosa (yellow) of height 60-75 cm. in earthen pots of size 20 cm as per direction of the officer-in-charge. 8.2 (dsr hort. 2020)
120
4863
40.53
Providing and stacking of Calliandra hybrida of height 105-120 cm., well branched, bushy in big size HDPE bag as per direction of the officer-in-charge.
8.7 (dsr hort. 2020)
90
7296
81.07
Providing and stacking of Cassia laevigata of height 45-60 cm. in earthenpots of size 20 cm as per direction of the officer-in-charge. 8.11 (dsr hort. 2020)
90
2837
31.53
Providing and stacking of Chandni dwarf of height 15-20 cm., well branched in earthen pots of size 20 cm as per direction of the officer-in-charge. 8.14 (dsr hort. 2020)
120
3783
31.53
Providing and stacking of Nyctanthes arbor-tristis (Hasingar) of ht. 90-105 cm in Earthen pots of size 20 cm as per direction of the officer-in-charge. 8.54 (dsr hort. 2020)
65
2341
36.03
Providing and stacking of Allamanda violacea of height 30 cm to 45 cm. in poly bag of size 20 cm as per direction of the officer-in-charge. 9.2 (dsr hort. 2020)
75
3039
40.53
Providing and stacking of Clerodendrum thomsoniae of height 30 cm.to 45 cm in 20 cm size of poly bag & as per direction of the officer-in-charge.
9.6 (dsr hort. 2020)
65
2634
40.53
Providing and stacking of Vernonia elaegnifolia (curtain creeper) plant of height 30 cm to 45 cm. in 20 cm size of Earthen pots / Plastic pots & as per direction of the officer-in-charge. 9.14 (dsr hort. 2020)
25
563
22.52
Providing and Stacking of Aprajita Blue well developed in poly bag of size 20 cm as per direction of the officer-in-charge.
11.17 (dsr hort. 2020)
30
810
27.02
Providing and Stacking of Aprajita White well developed in poly bag of size 20 cm as per direction of the officer-in-charge.
11.18 (dsr hort. 2020)
40
1080
27.02
IRRIGATION SYSTEM
DRIP IRRIGATION SYSTEM FOR PLANTATION - A
SYSTEM HEAD UNIT SNAD FILTER + BACKWASH ASSLY 2.5"
P.S.
1
44010
44010
SCREEN FILTER 2.5"
P.S.
1
7223
7223
ASSLY FOR FILTER 2.5"
P.S.
1
6683
6683
PRESSURE GAUGE + STOP COCK
P.S.
4
2756
689
PRV P.S.
1
26325
26325
NRV
P.S.
1
16875
16875
NETWORK - FINOLEX HDPE & PVC PIPES
HDPE PIPE 75 MM PN4 (TANK TO PLOT)
P.S.
180
47700
265
PVC PIPE 75 MM 4KG/CM2
P.S.
220
41360
188
PVC PIPE 63 MM 4KG/CM2
P.S.
180
24120
134
EMITTING SYSTEM
FINOGOL PLAIN LATERAL 16 MM
P.S.
350
5950
17
DRIPPER 8 LPH
P.S.
220
1100
5
START TO END SET FOR DRIP LINE 16 MM
P.S.
120
3360
28
BARBED COUPLER 16 MM
P.S.
40
480
12
TEE 16 MM
P.S.
30
570
19
ELBOW 16 MM
P.S..
30
570
19
ELBOW 16 MM
P.S..
35
665
19
BALL VALVE 63 MM
P.S.
10
9720
972
FLUSH VALVE 63 MM
P.S.
10
1350
135
VALVE BOX 12"
P.S.
10
20930
2093
Pump: Crompton Greaves 10.00 Hp pump with necessary accessories.(Market Rate) P.S.
1
99000
99000
Providing and fixing H.D.P. container Syntex or alike one piece moulded water tank made out of low density polythyler and built corrugation including of delivery upto destinatin hoisting and fixing of accessories such as inlet,outlet over flow of all tanks capacity above 1000 to 20,000 litres
D.S.R. 18.48
25000
208000
8.32
Water tank platform & Shed
Excavation for roadway in earth, soil of all sorts, sand, gravel or soft murum including dressing section to the required grade, camber and side slopes and conveying the excavated materials with all lifts upto a lead of 50m. and spreading for embankment or stacking as directed. By Manual Means. (with prior permission of S.E.)
D.S.R. Item No. 2.2.1)
35
10462
298.94
Providing & laying cement concrete 1:4:8 (1 Cement : 4 coarse sand (zone-III) derived from natural sources : 8 graded stone aggregate 40 mm nominal size derived from natural sources)
D.S.R. Item No. 4.1.8
4.85
24984
5151.41
Providing and laying Cast in situ/Ready Mix cement concrete in M15 of trap/ granite/quartzite/gneiss metal for bed blocks, foundation blocks and such other items including bailing out water, Steel centering, formwork, laying/ pumping, compacting, roughening them if special finish is to be provided, finishing uneven and honeycombed surface and curing etc. complete. The Cement Mortar 1:3 plaster is considered for rendering uneven and honeycombed surface only. Newly laid concrete shall be covered by gunny bag, plastic, tarpaulin etc. (Wooden centering will not be allowed.), with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etc. complete. With fine aggregate (Crushed sand VSI Grade)
D.S.R. 4.20.1.2
10
67955
6795.56
Providing and laying in situ /Ready Mix cement concrete M-20 of trap / granite /quartzite/ gneiss metal for R.C.C. work in foundations like raft, strip foundations, grillage and footings of R.C.C. columns and steel stanchions etc. including bailing out water, Steel centering formwork, laying/pumping cover blocks, compaction and curing roughening the surface if special finish is to be provided (Excluding reinforcement and structural steel) etc. complete, with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etc. complete. With fine aggregate (Crushed sand VSI Grade)
D.S.R. 4.20.1.3
8
55734
6966.8
Providing and fixing in position TMT - FE - 500 bar reinforcement of various diameters for R.C.C. pile caps, footings, foundations, slabs, beams columns, canopies, staircase, newels, chajjas, lintels pardis, copings, fins, arches etc. as per detailed designs, drawings and schedules. including cutting, bending, hooking the bars, binding with wires or tack welding and supporting as required complete.
D.S.R. Item No. 5.22.1
1900
153881
80.99
Random rubble masonry with hard stone in foundation and plinth including levelling up with cement concrete 1:6:12 (1 cement : 6 coarse sand : 12 graded stone aggregate 20 mm nominal size) upto plinth level with :
Cement mortar 1:6 (1 cement : 6 coarse sand)
D.S.R. 7.1.1
16
88463
5528.96
Random rubble masonry with hard stone in superstructure above plinth level and upto floor five level, including leveling up with cement concrete 1:6:12 (1 cement : 6 coarse sand : 12 graded stone aggregate 20 mm nominal size) at window sills, ceiling level and the like. Cement mortar 1:6 (1 cement : 6 coarse sand)
D.S.R. 7.2.1
11.5
80664
7014.33
Pointing on stone work with cement mortar 1:3 (1 cement : 3 fine sand) :
13.33.1 Flush/ Ruled pointing sqm
36
10492
291.45
Providing and fabricating structural steel work in rolled sections like joists, channels, angles, tees etc. as per detailed design and drawings or as directed including cutting, fabricating, hoisting, erecting, fixing in position making riveted / bolted /welded connections without connecting plates, braces etc. and including one coat of anticorrosive paint and over it two coats of oil painting of approved quality and shade etc. complete.
SHS 60x60x3 Column (5.34Kg/mtr)
ISA 40X40X3 (1.83 Kg/mtr)
Cleat ( 35X35X3)
Base Plate ( 200x200x6) (7850 Kg/Cum)
Top Plate ( 200x200x6)
D.S.R. 10.20
860
86954
101.11
Providing corrugated G.S. sheet roofing including vertical / curved surface fixed with polymer coated J or L hooks, bolts and nuts 8 mm diameter with bitumen and G.I. limpet washers or with G.I. limpet washers filled with white lead, including a coat of approved steel primer and two coats of approved paint on overlapping of sheets complete (up to any pitch in horizontal/ vertical or curved surfaces),
D.S.R. Item No. 12.1.1
115
126721
1101.93
Borewell
Boring/Drilling bore well for required dia for Casing strainer pipe
as per DSR No 23.1.1.1 ( depth upto 90 mtr)
90
48169
535.22
Boring/Drilling of bore well of required dia for casing strainer
pipe as per DSR No 23.2.1.1( beyond 90 mt upto 150 mtr deep
33
20605
624.42
Supplying, Assembling , lowering and fixing in Vertical position in bore well unplasticized PVC medium well casing ( CM ) pipe of
required dia as per DSR No 23.3.2 ( 150 mm dia )
93
55788
599.88
Supplying, Assembling , lowering and fixing in vertical position in bore well unplasticized PVC medium well screen as per DSR No
23.4.2 ( 150 mm dia )
30
18318
610.61
Providing and fixing bail plug/Bottom pug as per DSR No 23.15.2
( 150 mm dia )
1
243
243.5
Providing and fixing M.S clamp of required dia to the top of
Casing pipe as per DSR No 23.14.2 ( 150 mm dia )
1
1526
1526.86
Providing and fixing of suitable sixe threaded mild steel cap as
per DSR No 23.11.2 ( 150 mm dia )
1
1589
1589.78
EXTERNAL ELECTRICAL WORKS
SCHEDULE ITEMS (AS PER P.W.D. SOR Item No. 2022 SCHE. 2018)
NON - SCHEDULED ITEMS (AS PER MARKET RATES )
SUB-HEAD-I (SUBSTATION EQUIPMENTS)
TRANSFORMER
100KVA 11KV/433V Dyn11 Copper Wound Oil Type Transformer with OCTC +5% to -10% in steps of 2.5% , Class of Insulation: A, Temperature rise limits of 40 deg.C over ambient of 50 degrees. Losses (As per IS tolerances) No load losses -2.7kW, Full load losses - 7.7kW and all accessories and confirming to As per IS 1180 Level 2 & Testing paramtr as per IS 2026 complete with all fittings and accessories as per specifications attached etc as required at site.
N.S. (P.S.)
1
456399
456399
H.T. VCB (11KV) Design, manufacturing, testing at works, supply of HT Panel as per specification and comprising of the following :-
a. INCOMER
630 A Vacuum circuit breaker of 26.3 KA ruputuring capacity at 11 KV rated, totally enclosed,air insulated metal clad housing, floor mounting, vertical isolation,vermin proof,fully interlocked horizontal drawout type having double isolation. Manually and motor operated, spring charged( release closing mechanism) trip free type,triple pole truck mounted draw out, vacuum circuit breaker, incorporating mechanical as well as electrical ON/OFF indication. Spring charge/discharge mechanical indicator. 630 amp air insulated but encapsulated,PVC insulated Copper bus bars.C.T. chamber with C.T.'s 40/5. 15 VA burden for protection (class 5P 10). Following protection shall be provided:
1 Nos IDMT relay with instantaneous 2 nos. over currrent (50, 50 N) element and 1 no. instantaneous earth fault element(50-50N).(O/C setting 50%-200% and E/F setting 20%-80%) All wiring necessary for the above including inter-connections. The size of the conductor should not be less than 2.5 sq. mm. Copper wire where required. Test terminal block, fuses/2A SPMCB , circuit labels,set of phase, indication lamps etc. as per standard practise as under. Red - Breaker close (ON) Green - Breaker open (OFF) Amber - auto trip Clear - trip circuit healthy white - 3 nos. one per phase Control :- T-N-C (Trip, Neutral. Close) breaker control switch with indication arrangement. Blue spring charged Terminal boxes with single gland trifucating cable box suitable for 11 KV Aluminium XLPE (E) cable of size 3C x 150 Sq. mm. for incoming/outgoing breaker. HT Danger Plate.(as per IS specification) 2 Runs of 40 X 5 mm earth bus shall be provided for the full length of the panel. Power Pack, Battery power pack shall be rated for minimum five (5) trippings. For DC power one no. source selector switch to be incorporated i.e. one source from power pack and other from outside. Necessary D.C. supply healthy indication lamp (White Colour), switch with alarm. Surge supressor as required.
DC Voltmtr, 0-30 Volt, Digital type. HT Panel switchboard complete with all interconnections, labels, wiring etc, complete as described above in item nos.A and B and as per specifications. N.S. (P.S.)
1
495374
495374
SUB-HEAD-II (HT CABLES )
Supply and making indoor cable end jointing with cast resin compound, including lugs and other jointing materials, for 3 core 300 Sq.mm. XLPE aluminium conductor cable of 11 kV grage as required.
D.S.R. 2018 Electrical Item No. 10.1.4
2
5699
2849.83
Supply and making outdoor cable end jointing with cast resin compound, including lugs and other jointing materials, for 3 core 300 Sq.mm. XLPE aluminium conductor cable of 11 kV grage as required.
D.S.R. 2018 Electrical Item No. 10.2.4
2
9338
4669.24
SUBHEAD III-EARTHING AND LOOP EARTHING
Supply and burying of 40mm dia x 4.5 mtrs long G.I. Pipe vertically for earthing having 12mm dia. Holes spaced 75mm apart drilled up to 2 mtr from the bottom complete with earthing lead of No. 6 to 8 SWG GI wire in G.I. Pipe up to appron (and from appron to switch board the cost of G.I. wire and pipe will be extra) upto switch board, 30cm square C.I. box with hinged cover masonary enclosure, funnel at top, alternate layers of charcoal/coke and salt at least 150mm thick alround etc. as per directions of Engineer-in-charge complete in all respects as per drawing.
P.W.D. SOR Electrical 2018 ITEM No. 701
2
8152
4076
Supply and burying of 600mm x 600 mmx6mm G.I. plate, vertically for earthing with its top atleast 3 mts. below ground level complete with 20mm G.I.pipe and funnel for watering and two earthing leads of No.8to10SWG G.I.wire in 15mm diaG.I. pipe upto switch board (from apron to switch board the cost of G.I. pipe and G.I. wire will be extra) 30cm. square C.I. frame with hinged cover, masonary housing, alternate layers/of charcoal/ coke and salt at least 150mm thick alround etc. complete in all respects.
P.W.D. SOR Electrical 2018 ITEM No. 703
12
64560
5380
Supply and burying of 600mm X 600mm X 3 mm copper Plate vertically for earthing with its top at least 3 mtrs below ground level complete with 20mm dia G.I pipe and funnel for watering and one earthing lead of one no. 8 SWG copper wire in 15 mm dia G.I pipe up to switch board ( from appron to switch board the cost of G.I pipe and copper wire will be extra) 30 cm square C.I frame with hinged cover masonry housing alternate layers of charcoal / coke and salt atleast 150mm thick alround etc. as per directions of Engineer in charge complete in all respects.
P.W.D. SOR Electrical 2018 ITEM No. 705
2
20900
10450
Supply and laying of 32mm x 6mm G.I. strip from earth electrode directly in the ground as required complete in all respects.
P.W.D. SOR Electrical 2018 ITEM No. 717
120
18000
150
Supply and Laying of 32mm X 6 mm Copper strip from earth electrode directly in the ground as required complete in all respects.
P.W.D.SOR Electrical 2018 ITEM No. 718
90
99900
1110
Supply and laying of 25mm x 3mm G.I. strip from earth electrode directly in the ground as required complete in all respects.
P.W.D. SOR Electrical 2018 ITEM No. 716
185
16650
90
Supply and fixing of one number 8 SWG G.I wire in 15mm dia. G.I pipe for earthing laid in ground or in wall duly concealed including the cost of cement, sand, labour, T&P other material required for proper completion of the work as directed at site.
P.W.D. SOR Electrical 2018 ITEM No. 721
325
65000
200
Supply and fixing of LED street light fitting having die cast aluminium body and diffuser with driver set suitable for 45 watt to 50 watt. Confirming to IP 66 and above protection complete in all respect.
P.W.D. SOR Electrical 2018 ITEM No. 1421
15
74100
4940
Supply and fixing of 6 Amp to 32 Amp DP MCB (10KA) (C curve) for poles
P.W.D.SOR Electrical 2018 ITEM No. 1009
16
11840
740
Supply and fixing following capacity of automatic street light cubicle control panel painted with anti corrosive alkali and acid proof paint consisting of time switch TSO 100 series with contractors, HRC fuses, isolating switch mtring instrument & instrument box with CTs etc. in case of TPN complete in all respect.
25 Amp SPN P.W.D. SOR Electrical 2018 ITEM No. 807 (b)
4
71200
17800
Supply and fixing of Bakelite sheet 3 mm thick of suitable size & connector
N.S (P.S.)
10
1000
100
Wiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in surface / recessed medium class PVC conduit, with modular type switch, modular plate, suitable size G.I. box and earthing the point with 1.5 sq.mm. FRLS PVC insulated copper conductor single core cable etc as required.
Group C
make:Schneider/RR Kabel/Northwest D.S.R. Item No. 1.10.3 (Electrical 2022)
450
521284
1158.41
Wiring for circuit/sub-main wiring along with earth wire with the following size of FR PVC insulated copper conductor, single core cable in surface/ recessed medium class PVC conduit as required.
make:Schneider/RR Kabel/Northwest 2X1.5 sqmm + 1x1.5 sqmm earth wire
D.S.R. Item No. 1.14.1 (Electrical 2022)
1865
343141
183.99
2X2.5 sqmm + 1x 2.5 sqmm earth wire
make:Schneider/RR Kabel/Northwest D.S.R. Item No. 1.14.2 (Electrical 2022)
1150
249722
217.15
2X4.0 sqmm + 1x 4.0 sqmm earth wire
make:Schneider/RR Kabel/Northwest D.S.R. Item No. 1.14.3 (Electrical 2022)
785
207035
263.74
2X6.0 sqmm + 1x 6.0 sqmm earth wire
make:Schneider/RR Kabel/Northwest D.S.R. Item No. 1.14.4 (Electrical 2022)
250
86662
346.65
Supplying and drawing co-axial TV cable RG-6 graded, 0.7 mm solid copper conductor PE insulated,shielded with fine tinned copper braid and protected with PVC sheath in the existing surface/ recessed steel/ PVC conduit as required. make:Schneider/RR Kabel/Northwest D.S.R. Item No. 1.19 (Electrical 2022)
250
9277
37.11
Supply and fixing of following size of PVC conduit alongwith the accessories in recess including painting in case of surface conduit, or cutting the wall and making good the same in case of recessed conduit as required: 20mm
make:Schneider/RR Kabel/Northwest D.S.R. Item No. 1.21.1 (Electrical 2022)
1565
158174
101.07
Supplying and fixing following modular switch/ socket on the existing modular plate & switch box including connections but excluding modular plate etc as required.
TV antenna socket outlet
make:Schneider/RR Kabel/Northwest D.S.R. Item No. 1.24.7 (Electrical 2022)
450
52591
116.87
Supply and fixing of stepped type electronic fan regulator on the existing modular plate switch box including connections but excluding modular plate etc. as required. make:Schneider/RR Kabel/Northwest D.S.R. Item No. 1.25 (Electrical 2022)
110
32051
291.38
Supplying and fixing modular blanking plate on the existing modular plate & switch box excluding modular plate as required.
make:Schneider/RR Kabel/Northwest D.S.R. Item No. 1.26 (Electrical 2022)
110
3474
31.59
Supplying and fixing following size/modules, GI box along with modular base & cover plate for modular switches in recess etc as required. 1 or 2 module(75mm X 75 mm )
make:Schneider/RR Kabel/Northwest D.S.R. Item No. 1.27 (Electrical 2022)
110
25884
235.31
Supplying and fixing suitable size GI box with modular plate and cover in front on surface or in recess including providing and fixing 3 pin 5/6 A modular socket outlet and 5/6 A modular switch,connection etc. as required.
make:Schneider/RR Kabel/Northwest D.S.R. Item No. 1.31 (Electrical 2022)
110
41432
376.66
Supplying and fixing suitable size GI box with modular plate and cover in front on surface or in recess including providing and fixing 6 pin 5/6 & 15/16 A modular socket outlet and 15/16 A modular switch,connection etc. as required.
make:Schneider/RR Kabel/Northwest D.S.R. Item No. 1.32 (Electrical 2022)
110
50900
462.73
Supplying and fixing 3 pin 5 A ceiling rose on the existing junction box/woodedn block including connectionetc. as required. make:Schneider/RR Kabel/Northwest D.S.R. Item No. 1.33 (Electrical 2022)
110
7557
68.7
Supplying and fixing brass batten/angle holder including connectionetc. as required.
make:Schneider/RR Kabel/Northwest D.S.R. Item No. 1.34 (Electrical 2022)
110
11378
103.44
Instalation,testing & commissioning of wall bracket /ceiling fittings of all sizes and shapes containing upto two GLSCFL/LED lamps per fitting, complete with all accessories including connection etc. as required.
make:Schneider/RR Kabel/Northwest/Bajaj D.S.R. Item No. 1.35 (Electrical 2022)
12
1127
93.97
Installation, testing and commissioning of prewired, flourescent fitting / compact fluorescent fitting of all types, complete with all accessories and tubes etc. directly on ceiling / wall, including connection with 1.5 sq. mm. PVC insulated, copper conductor, single core cable etc. as required. make:Schneider/RR Kabel/Northwest/Bajaj D.S.R. Item No. 1.41 (Electrical 2022)
120
19520
162.67
Installation, testing and commissioning of ceiling fan, including wiring the down rods of standard length (upto 30 cm) with 1.5 sq. mm FRLS PVC insulated, copper conductor, single core cable etc. Including providing and fixing phenolic laminated sheet cover on the fan box etc. as required.
make:Schneider/RR Kabel/Northwest/Bajaj D.S.R. Item No. 1.45 (Electrical 2022)
110
29445
267.69
Numbering of ceiling fan/ exhaust fan/ fluorescent fittings as required.
D.S.R. Item No. 1.49 (Electrical 2022)
190
8551
45.01
Installation of exhaust fan in the existing opening, including making good the damage, connections, testing, commissioning etc. as required. upto 450 mm sweep.
D.S.R. Item No. 1.50 (Electrical 2022)
80
28427
355.34
Extra for fixing the louvers / shutters complete with frame fro exhaust fans of all sizes. D.S.R. Item No. 1.51 (Electrical 2022)
80
13076
163.46
Supply and fixing suitable size GI box with modular plate and cover in front on surface or in recess, including providing and fixing 25 A modular socket outlet and 25 A modular SP MCB, `C` curve including connections, painting etc. as required.
D.S.R. Item No. 1.57 (Electrical 2022)
80
45925
574.07
Supply, Installation, Testing and Commissioning of 1200 mm sweep, BEE 5 star rated, ceiling fan with Brush Less Disect Current(BLDC) motor, class of insulation: B, 3 nos. blades, 30 cm long down rod, 2 nos. canopies, shackle kit, safety rope, copper winding, Power Factor not less than 0.9, Service Value(CM/M/W) minimum 6, Air delivery minimum 210 Cum/Min, 350 RPM(tolerance as per IS: 374-2019), THD less than 10% remote or electronic regulator unit for speed control and all remaining accessories including safety pin, nut bolts, washers, temperature rise= 75 degree C(max.), insulation resistance more than 2 mega ohm, suitable for 230 V, 50 Hz, single phase AC Supply, earthing etc. complete as required.
make: Bajaj/Havells/Crompton
D.S.R. Item No. 19.1 (Electrical 2022)
110
237130
2155.73
Supplying and fixing following way, single pole and neutral sheet steel, MCB distribution board, 240 V on surface /recess complete with , tinned copper busbar, neutral busbar, earth bar, din bar, interconnections, powder painted including earthing etc. as required (But without MCB / RCCB / Isolators). make:Schneider/RR Kabel/Northwest
12 way, Double door
D.S.R. Item No. 2.3.3 (Electrical 2022)
36
65809
1828.03
Supplying and fixing 5 amps. to 32 amps. rating, 240 volts `C' series, miniature circuit breaker (MCB) suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required.
Make:Schneider/RR Kabel/Northwest
Single Pole
D.S.R. Item No. 2.10.1 (Electrical 2022)
6
1212
202.15
Double Pole
D.S.R. Item No. 2.10.3 (Electrical 2022)
4
2072
518.01
12 Way SPN. Make: Schneider/MDS UPPWD-2018 1025 (A)
6
13500
2250
6 Way TPN Make: Schneider/MDS UPPWD-2018 1027 (A)
4
17480
4370
Supplying and fixing single pole, blanking plate in the existing MCB DB complete etc. as required.
Make:Schneider/RR Kabel/Northwest
D.S.R. Item No. 2.11 (Electrical 2022)
20
205
10.27
Earthing with GI earth pipe, 600 mm X 600 mm X 6 mm thick including accessories and providing masonary enclosure with cover plate having locking arrangement and watering pipe of 2.7 metre long etc, with charcoal/cock and salt as required. Make: As approved in U.P.P.W.D & C.P.R.I.
D.S.R. Item No. 5.4 (Electrical 2022)
3
17700
5900.23
Supplying and Laying of 25 mm X 3 mm G.I strip at 0.50 metre below ground as strip earth electrode, including connection / terminating with nut, bolt, spring, washer etc. as required.( jointing shall be done by overlapping and with 2 sets of G.I. nut bolt & spring washer spaced at 50mm)
Make: As approved in U.P.P.W.D & C.P.R.I.
D.S.R. Item No. 5.9 (Electrical 2022)
45
5116
113.71
Supplying and Laying of 6 SWG G.I wire at 0.50 metre below ground level for conductor earth electrode, including connection / terminating with G.I. thimble etc. as required.
Make: As approved in U.P.P.W.D & C.P.R.I.
D.S.R. Item No. 5.7 (Electrical 2022)
30
1208
40.27
Laying of one number PVC insulated and PVC sheathed/XLPE power cable of 1.1 KV grade of following size direct in ground including excavation, sand cushioning, protective covering and refilling the trench etc. as required. Upto 35 sq. mm
Make: Finolex/R.R. Kabel
D.S.R. Item No. 7.1 (Electrical 2022)
45
13751
305.59
Supplying & making end termination with brass compression gland and aluminium lugs for the following size of PVC sheathed / XLPE aluminium conductor cable of 1.1 KV grade as required.
Make: Finolex/RR Kabel 2 X 10 sqmm. (19mm)
D.S.R. Item No. 9.2 (Electrical 2022)
3
570
190.3
Providing, laying and fixing following dia G.I. pipe (medium class) in ground complete with G.I. fittings including trenching (75 cm deep) and refilling etc as required.
Make Finolex 50 mm Dia
D.S.R. Item No. 14.13.1 (Electrical 2022)
75
38744
516.59
Supply of following size of 1.1 KV grade multicore aluminium conductor PVC sheathed armoured cable as per IS 1554.
16 sq. mm 4 core PWD SOR 501(i)
Make - Finolex/RR Kabel
75
25725
343
Supply & fixing of Supplying Installation, testing and commissioning of Consealed LED light (Market Rate)
BPSLR 9W LED WH RD SD
Make : Philips/Bajaj
180
108000
600
Supply and fixing of LED Tube Light with batten suitable for up to 1X20 watt LED tube light complete including tube etc. on surface complete in all respect.
BCLAB 20W LED P
Make : Philips/Bajaj
80
76000
950
S/f of 340 mm wide x 101.6 mm deep(3.0") Concealed Box PWD SOR Item No. 1151c
180
19800
110
Supply and fixing of LED Sqaure Ceiling light 24Watt.
BPSLR Surface 24W LED WH SQ SD
Make : Philips/Bajaj
80
136000
1700
Supply of 300mm dia sweep PVC body, 900±10% RPM Exhaust fan with guard and mounting arrangement. (As per MR-G11) (Rate=979/1.18
300mm sweep. Make : Philips/Bajaj
40
33186
829.66
SUBHEAD V-MAIN L. T. PANELS
PANEL (for type-Admin Building)
Supply, installation, testing and commissioning of electrical panel, modular type, front accessible only, free floor standing confirming to Minimum IP:43 degree of protection. The panel sheet structure shall undergo seven tank pre-treatment process before painting. The sheet steel shall be all of 2.0mm thick CRCA sheet. All the openable compartments of the panel shall be completely shrouded and provided with padlocking arrangement on all compartments including bus bar and cable alley chambers. The panel height shall not exceed 2200mm and the maximum operating height for any switchgear shall not be more than 1700mm. The panel shall be provided with minimum 75mm base channel frame fabricated from ISMC sections. All bus bar links in the panel shall be solid bus bars with coloured PVC shrinkable sleeves, no wires will be acceptable. Continuous earth bus shall run alround the panel with earthing studs provided at minimum 2 places. The control wiring shall be carried out with minimum 1.5/2.5 sqmm copper wires and adequate number of NO/NC, potential free contacts incorporated for remote operation of the starters. Proper sized cable termination gland plates shall be provided on cable alleys and knockouts for same shall be provided during fabrication stage itself. The panel shall be provided with a thermostatically controlled heating arrangement (200 W) to take care of high humidity conditions. A 5A socket service outlet (single phase) shall be provided in one of the compartments as ervice outlet in the panel. Panel shall be so designed at to have minimum 20% spare feeders/space. Panel shall undergo epoxy powder coated paint, colour as per IS:5 requirement. All cable terminations shall be from top. The complete panel shall be fuse less type, for control circuits 2A/6A MCB's to be used.All bus bars shall be of aluminium, electrolytic grade only. Maximum design density shall not exceed 1 Amps/Sqmm. All bus bars shall be insulated with coloured heat shrinkable PVC sleeved. All bus bar supports shall be non hygroscopic DMC/SMC supports.The panel shall be manufactured in conformance to requirements of local electrical inspector and it shall be contractors responsibility to get initial approval of drawings and also final approval of complete electrical works related to this section. make:Schneider/RR Kabel/Northwest The minimum clearances between bus bars shall be as follows :
Phase to phase - minimum 20mm Phase to neutral-minimum 15mm mtr PANEL Incoming : One (1) No 100 Amp. 4P MCCB of 25KA Breaking capacity mtring :
One (1) No. Sets Multifunction mtr nos incoming One (1) No. of Phase Indication Lamp nos incoming Bus Bar : One (1) No. 150 Amp.TPN aluminimum bus bar of suitable length. Outgoing : Phase indication lamps on nos outgoing to be provided. 01 No.63 Amp 4P MCB. (10 KA) 19 No.63 Amp DP MCB. (10 KA) 02 No.40 Amp DP MCB. (10 KA)
Panel described as above. N.S
1
151250
151250
SUBHEAD V-MAIN L. T. PANELS
PANEL (for Residence Building)
Supply, installation, testing and commissioning of electrical panel, modular type, front accessible only, free floor standing confirming to Minimum IP:43 degree of protection. The panel sheet structure shall undergo seven tank pre-treatment process before painting. The sheet steel shall be all of 2.0mm thick CRCA sheet. All the openable compartments of the panel shall be completely shrouded and provided with padlocking arrangement on all compartments including bus bar and cable alley chambers. The panel height shall not exceed 2200mm and the maximum operating height for any switchgear shall not be more than 1700mm. The panel shall be provided with minimum 75mm base channel frame fabricated from ISMC sections. All bus bar links in the panel shall be solid bus bars with coloured PVC shrinkable sleeves, no wires will be acceptable. Continuous earth bus shall run alround the panel with earthing studs provided at minimum 2 places. The control wiring shall be carried out with minimum 1.5/2.5 sqmm copper wires and adequate number of NO/NC, potential free contacts incorporated for remote operation of the starters. Proper sized cable termination gland plates shall be provided on cable alleys and knockouts for same shall be provided during fabrication stage itself. The panel shall be provided with a thermostatically controlled heating arrangement (200 W) to take care of high humidity conditions. A 5A socket service outlet (single phase) shall be provided in one of the compartments as ervice outlet in the panel. Panel shall be so designed at to have minimum 20% spare feeders/space. Panel shall undergo epoxy powder coated paint, colour as per IS:5 requirement. All cable terminations shall be from top. The complete panel shall be fuse less type, for control circuits 2A/6A MCB's to be used.All bus bars shall be of aluminium, electrolytic grade only. Maximum design density shall not exceed 1 Amps/Sqmm. All bus bars shall be insulated with coloured heat shrinkable PVC sleeved. All bus bar supports shall be non hygroscopic DMC/SMC supports.The panel shall be manufactured in conformance to requirements of local electrical inspector and it shall be contractors responsibility to get initial approval of drawings and also final approval of complete electrical works related to this section. make:Schneider/RR Kabel/Northwest The minimum clearances between bus bars shall be as follows :
Phase to phase - minimum 20mm, Phase to neutral-minimum 15mm, mtr PANEL. Incoming : One (1) No 100 Amp. 4P MCCB of 25KA Breaking capacity . mtring : One (1) No. Sets Multifunction mtr nos incoming , One (1) No. of Phase Indication Lamp nos incoming Bus Bar : One (1) No. 150 Amp.TPN aluminimum bus bar of suitable length. Outgoing : Phase indication lamps on nos outgoing to be provided. Phase indication lamps on nos outgoing to be provided. 01 No.63 Amp 4P MCB. (10 KA) 07 No.63 Amp DP MCB. (10 KA) 02 No.40 Amp DP MCB. (10 KA) Panel described as above. N.S
1
85650
85650
FAN & LIGHTS P/F EDGAR 3.5m DA POLE WITH RUBUS 27W - M.R.
Make: Bajaj. Market Rate
20
1687093
84354.66
P/F TULIP 25W DA MARCUS 3M POLE
Make: Bajaj. Market Rate
20
1712898
85644.9
P/F SPIKE LIGHT 9W Make: Bajaj. Market Rate
60
232254
3870.9
P/F TETRIS - BGBOS 605 9W LED BOLLARD Make: Bajaj.
ANNEXURE-E-15 Market Rate
60
365700
6095
P/F 45W decorative Antique LED post Top Light
Anitiqua in 45W
Make Bajaj Market Rate
10
116550
11655
Plumbing & Sanitary Works
Providing and fixing floor mounted, white vitreous china single piece, double traps syphonic water closet of approved brand/make, shape, size and pattern including integrated white vitreous china cistern of capacity 10 litres with dual flushing system, including all fittings and fixtures with seat cover, cistern fittings, nuts, bolts and gasket etc including making connection with the existing P/S trap, complete in all respect as per directions of Engineer-in-Charge
Make : Jaquar
D.S.R. 17.81
8
110184
13773.06
Providing and fixing white vitreous china flat back half stall urinal of size 580x380x350 mm with white PVC automatic flushing cistern, with fittings, standard size C.P. brass flush pipe, spreaders with unions and clamps (all in C.P. brass) with waste fitting as per IS : 2556, C.I. trap with outlet grating and other couplings in C.P. brass, including painting of fittings and cutting and making good the walls and floors wherever required :
Single half stall urinal with 5 litre P.V.C. automatic flushing cistern.
Make : Jaquar
D.S.R. 17.5.1
2
18257
9128.97
Range of four half stall urinals with 10 litre P.V.C. automatic flushing cistern.
Make : Jaquar
D.S.R. 17.5.4
2
39277
19638.77
Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass pillar taps, 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever require, White Vitreous China Wash basin size 630x450 mm with a single 15 mm C.P. brass pillar tap
Make : Jaquar
D.S.R. 17.7.1
10
20031
2003.13
Providing and fixing 8 mm dia C.P. / S.S. Jet with flexible tube upto 1 metre long with S.S. triangular plate to Eureopean type W.C. of quality and make as approved by Engineer - in - charge.
Make : Jaquar
D.S.R. 17.16A
8
2112
264.04
Providing and fixing P.V.C. waste pipe for sink or wash basin including P.V.C. waste fittings complete.
Semi rigid pipe 40 mm dia Make : Jaquar
D.S.R. 17.28.1.2
12
1059
88.25
Providing and fixing 100 mm sand cast Iron grating for gully trap.
Make : Jaquar
D.S.R. 17.29
14
563
40.27
Providing and fixing 600x450 mm beveled edge mirror of superior glass (of approved quality) complete with 6 mm thick hard board ground fixed to wooden cleats with C.P. brass screws and washers complete.
Make : Jaquar
D.S.R. 17.31
10
12159
1215.97
Providing and fixing toilet paper holder :
C.P. brass
Make : Jaquar
D.S.R. 17.34.1
8
4862
607.78
Providing and fixing trap of self cleansing design with screwed down or hinged grating with or without vent arm complete, including cost of cutting and making good the walls and floors :
100 mm inlet and 100 mm outlet
Sand cast iron S&S as per IS - 3989
Make : PRINCE/ASTRAL
D.S.R. 17.60.1.1
10
12130
1213.06
Cutting chases in brick masonry walls for following diameter sand cast iron/centrifugally cast (spun) iron pipes and making good the same with cement concrete 1:3:6 ( 1 cement : 3 coarse sand :6 graded stone aggregate 12.5 mm nominal size), including necessary plaster and pointing in cement mortar 1:4 (1 cement : 4 coarse sand) :
50 mm dia
D.S.R. 17.61.3
15
3811
254.09
C.P.V.C. PIPES
Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer in Charge
Concealed work, including cutting chases and making good the walls etc. 20 mm nominal outer dia Pipes D.S.R. Item no. 18.9.2
265
54968
207.43
Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings This includes jointing of pipes & fittings with one step CPVC solvent cement, trenching, refilling & testing of joints complete as per direction of Engineer in Charge
25 mm nominal outer dia Pipes, Make: Astral/Finolex
D.S.R. Item no. 18.9.3
95
25532
268.76
32 mm nominal outer dia Pipes, Make: Astral/Finolex
D.S.R. Item no. 18.9.4
120
39801
331.68
40 mm nominal outer dia Pipes, Make: Astral/Finolex
D.S.R. Item no. 18.9.5
90
38321
425.79
50 mm nominal outer dia Pipes, Make: Astral/Finolex
D.S.R. Item no. 18.9.6
60
35681
594.69
Providing and fixing uplasticised PVC connection pipe with brass unions :
30 cm length 15 mm nominal bore, Make Astral/Finolx
D.S.R. 18.21.1.1
12
771
64.28
45 cm length 15 mm nominal bore, Make Astral/Finolex
D.S.R. 18.21.2.1
12
887
73.92
C.P. BRASS FITTINGS
Providing and fixing C.P. brass bib cock of approved quality conforming to IS:8931 :
15 mm nominal bore, Make Jaquar
D.S.R. 18.49.1
10
3832
383.26
Providing and fixing C.P. brass long nose bib cock of approved quality conforming to IS standards and weighing not less than 810 gms.
15 mm nominal bore, Make Jaquar
D.S.R. 18.50.1
10
6206
620.63
Providing and fixing C.P. brass stop cock (concealed) of standard design and of approved make conforming to IS:8931.
15 mm nominal bore, Make Jaquar
D.S.R. 18.52.1
10
5070
507.01
Providing and fixing C.P. brass angle valve for basin mixer and geyser points of approved quality conforming to IS:8931
15 mm nominal bore, Make Jaquar
D.S.R. 18.53.1
20
8686
434.3
Providing and fixing C.P. Brass extension nipple (size 15mmx50mm) of approved make and quality as per direction of Engineer-in-charge.
15 mm nominal bore, Make Jaquar
D.S.R. 18.53A
20
1131
56.57
Providing and fixing PTMT liquid soap container 109 mm wide, 125 mm high and 112 mm distance from wall of standard shape with bracket of the same materials with snap fittings of approved quality and colour, weighing not less than 105 gms Make: Jaquar
D.S.R 2021 Item No. 17.71
10
1273
127.31
Providing and fixing toilet paper holder. Make: Jaquar
C.P. brass
D.S.R 2021 Item No. 17.34.1
8
4862
607.78
Providing and fixing stainless steel kitchen sink as per I.S.13983 with C.I brackets and stainless steel plug 40mm including painting of fittings and brackets, cutting and making good the walls wherever required complete in all respect Kitchen sink with drain board 510 x 1040 bowl depth 200 mm. Make : Jaquar
D.S.R 2021 Item No. 17.10.1.3
32
173242
5413.82
Providing and fixing P.V.C. waste pipe for sink or wash basin including P.V.C. waste fittings complete.
32 mm dia
P.W.D. SOR 2022 Item No. 17.28.1.1
32
2514
78.57
Cutting holes up to 30x30 cm in walls including making good the same:
With common burnt clay F.P.S. (non modular) bricks
D.S.R. 18.76.1
5
1575
315.19
Cutting holes up to 15x15 cm in R.C.C. floors and roofs for passing drain pipe etc. and repairing the hole after insertion of drain pipe etc. with cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size), including finishing complete so as to make it leak proof.
D.S.R. 18.77
5
1709
341.81
Making chases up to 7.5x7.5 cm in walls including making good and finishing with matching surface after housing G.I. pipe etc.
D.S.R. 18.78
5
767
153.44
DRAINAGE (For External Drainage Works)
Constructing masonry Chamber 60x60x75 cm inside, in brick work in cement mortar 1:4 (1 cement : 4 coarse sand) for sluice valve, with C.I. surface box 100mm top diameter, 160 mm bottom diameter and 180 mm deep ( inside) with chained lid and RCC top slab 1:2:4 mix (1 cement : 2 coarse sand : 4 graded stone aggregate 20mm nominal size ) , i/c necessary excavation, foundation concrete 1:5:10 (1 cement : 5 fine sand : 10 graded stone aggregate 40 mm nominal size) and inside plastering with cement mortar 1:3 (1 cement : 3 coarse sand) 12 mm thick, finished with a floating coat of neat cement complete as per standard design :
With common burnt clay F.P.S.(non modular) bricks of class designation 7.5.
D.S.R. 18.33.1
1
8214
8214.43
Providing and fixing square-mouth S.W. gully trap class SP-1 complete with C.I. grating brick masonry chamber with water tight C.I. cover with frame of 300 x300 mm size (inside) the weight of cover to be not less than 4.50 kg and frame to be not less than 2.70 kg as per standard design:
180x150 mm size P type With common burnt clay F.P.S. (non modular) bricks of class designation 7.5
D.S.R. 19.4.3.1
4
8476
2119.06
Constructing brick masonry manhole in cement mortar 1:4 ( 1 cement : 4 coarse sand ) with R.C.C. top slab with 1:1.5:3 mix (1 cement : 1.5 coarse sand (zone- III) : 3 graded stone aggregate 20 mm nominal size), foundation concrete 1:4:8 mix (1 cement : 4 coarse sand (zone- III) : 8 graded stone aggregate 40 mm nominal size), inside plastering 12 mm thick with cement mortar 1:3 (1 cement : 3 coarse sand) finished with floating coat of neat cement and making channels in cement concrete 1:2:4 (1 cement : 2 coarse sand : 4
graded stone aggregate 20 mm nominal size) finished with a floating
coat of neat cement complete as per standard design :
Inside size 90x80 cm and 45 cm deep including C.I. cover with frame (light duty) 455x610 mm internal dimensions, total weight of cover and frame to be not less than 38 kg (weight of cover 23 kg and weight of frame 15 kg) :
With common burnt clay F.P.S. (non modular) bricks of class designation 7.5
D.S.R. 19.7.1.1
8
77259
9657.42
Inside size 120x90 cm and 90 cm deep including C.I. cover with frame (heavy duty) 560 mm internal diameter, total weight of cover and frame to be not less than 208 kg (weight of cover 108 kg and weight of frame 100 kg) : With common burnt clay F.P.S. (non modular)
bricks of class designation 7.5 D.S.R. 19.7.3.1
2
49695
24847.95
Extra for depth for manholes :
Size 90x80 cm With common burnt clay F.P.S. (non modular) bricks of class designation 7.5
D.S.R. 19.8.1.1
1.5
10010
6673.99
With common burnt clay F.P.S. (non modular) bricks of class designation 7.5
Size 120x90 cm
D.S.R. 19.8.2.1
1.5
12007
8005.03
Providing M.S. foot rests including fixing in manholes with 20x20x10 cm cement concrete blocks 1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size) as per standard design :
With 20x20 mm square bar
D.S.R. 19.15.1
20
8238
411.92
Supplying and fixing C.I. cover 300x300 mm without frame for gully trap (standard pattern) the weight of cover to be not less than 4.5 kg
D.S.R. 19.20
2
1190
595.15
Making connection of drain or sewer line with existing manhole including breaking into and making good the walls, floors with cement concrete 1:2:4 mix (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) cement plastered on both sides with cement mortar 1:3 (1 cement : 3 coarse sand), finished with a floating coat of neat cement and making necessary channels for the drain etc. complete :
For pipes 100 to 250 mm diameter
D.S.R. Item No. 19.21.1
2
1225
612.88
Providing and placing on terrace (at all floor levels) polyethylene water storage tank. IS:12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank.
Make : Finolex/Astral
D.S.R. 18.48
4000
33280
8.32
Excavating trenches in all kind of soil of required width for pipes, cables etc. including excavation for sockets and dressing of sides, ramming of bottoms, depth upto 1.5 m. including getting out the excavated soil & then returning the soil as required, in layers not exceeding 20cm in depth including consolidating each deposited layer by ramming, watering, etc & disposig of surplus excavated soil as directed within a lead of 50m.
Pipes, cables etc. exceeding 80mm dia. But not exceeding 300 mm dia.
D.S.R. Item No. 2.10.1.2 (2023)
465
123829
266.3
Providing & laying PVC Pipe 100mm diameter
Make : Finolex/Astral
PWD SOR Item No. 730 B
250
77500
310
Providing & laying PVC Pipe 150mm diameter
Make : Finolex/Astral
PWD SOR Item No. 730 C
90
65250
725
Supply, Instalation, Testing & Commissioning of Self Priming pumps with plastic body, in built strainer basket, Impeller in PPO, Motor shaft in stainless steel AISI-420, Mechanical seal in SIC/graphite and steatite, Motor housing in aluminium, with motor -2800rpm, F class insulation, protection IP-55. (3W+1S) Capacity 32700 ltrs/hr
Head 16 mtr
Hp 5.5, Three Phase
Model: GSP-3020-5.5 (P.S.)
1
122780
122780
Swimming Pool U.V. Sterlizer
Supply, Instalation, Testing & Commissioning of U.V. Sterlizer with S.S. Housing outside, U.V. Lamp, glass tube and all other accessories with cleaning arrangement, supports, inlet outlet connection with bypass arrangement including S.S. Cabinet with glass door of suitable size to house the U.V. Sterlizer complete with required accessories.
Flow rate = 40000 Ltr/Hr
working Pressure = 2.5 Kg/Sqm
UV Lamp Wattage = 240 W
Model: UV-3010240W (P.S.)
1
142911
142911
Dosing Pump
Supply, Instalation, Testing & Commissioning of Chemical dosing Pump
for Chlorination with 200 Ltrs. Sintex tank and Accessories
Capacity 0-20 litres/hr.
Head 35 M
Model: DP-301004 (P.S.)
1
48000
48000
Stainless Steel Drain
Supply, Instalation, Testing & Commissioning of Stainless steel drain grating plate made out of 316 quality S S plates with suitable supporting frame and of following sizes and having holes of required size for drainout
chamber.
Size 400X400 MM
Model: DG-SS-316-03 (P.S.)
1
25245
25245
Inlet Nozzle
Supply, Instalation, Testing & Commissioning of Flow adjastable ABS
inlet nozzles UV treated with S.S. screws to fit in the 2" PVC pipes
Model: IN-301201 (P.S.)
8
5712
714
Suction Inlets (Vacuum points) Supply, Instalation, Testing & Commissioning of ABS white plastic suction port / Vacuum nozzle with 2 inch solvent cement connection
Model: VC-301301 (P.S.)
8
3880
485
Underwater LED Lights
Supply, Instalation, Testing & Commissioning of 12V, 54 W under water stainless steel 316L LED light fixture ( IP 68) including all required assessories & making connection as required. with 2 Mtr power cord.
Model: UWL-301611 (P.S.)
4
100000
25000
Power Supply
Supply, Instalation, Testing & Commissioning of Transformer for LED Lights 12V DC, 30 amp
Model: PS-301605 (P.S.)
4
60000
15000
Deck Box Supply, Instalation, Testing & Commissioning of ABS white plastic deck.
Model: JB-301101 (P.S.)
5
5355
1071
Cleaning Accessories
Extensive telescopic Handle, (2.4 - 4.8) metres long &1.1mm thick for
cleaning attachment in anodized almunium.
Model: GD-TP224A (P.S.)
1
3648
3648
Transparent Blue Polyethylene hose 40mm(1-1/2") dia 15 m length.
Model: GD-H3815PE (P.S.)
1
5801
5801
Surface net skimmer made in polypropylne
Model: GD-LS301 (P.S.)
1
884
884
Deep bag net Skimmer made in polypropylne
Model: GD-LS201 (P.S.)
1
702
702
Curved polybristle wall brush 450 mm
Model: GD-BR401 (P.S.)
1
642
642
Test kit for PH and chlorine.
Model: GD-TK907 (P.S.)
1
618
618
Hi-grade Stainless Steel Algae Brush - 10"
Model: GD-BR404 (P.S.)
1
1067
1067
Deluxe large Vacuum head with 4 wheels, alu-body, plastic handle, 1 1/2" connection size 445x130 mm Model: GD-VH012 (P.S.)
1
6102
6102
Polybristle wall brush 10" (26cm)
Model: GD-BR402 (P.S.)
1
375
375
Chemical TCCA 90 (50 kg.)
Model: GD-301921 (P.S.)
1
18000
18000
PLUMBING & ELECTRICAL PART
uPVC pipes
Providing and fixing uPVC pressure Pipes (10kg/cm2) with plain socket suitable for solvent cement jointing conforming to IS:4985/2000 & fittings conforming to IS 7834/87. Cut to required lengths including all necessary fittings and specials such as bends, tees, unions, reducers, flanges and plugs etc. The pipes & fittings shall be tested to a pressure of 10
Kg/Sq.cm. 32 mm dia (P.S.)
10
2300
230
63 mm dia (P.S.)
30
11700
390
75 mm dia (P.S.)
30
15450
515
90 mm dia (P.S.)
15
14730
982
110 mm dia (P.S.)
15
14475
965
160 mm dia (P.S.)
15
28890
1926
Ball Valve
Providing and fixing Pvc lever operated ball valve of full flow with setting and gland of superior quality having minimum working pressure of 10
kg/cm2 with union, flanges where as required.
32mm dia (P.S.)
1
900
900
63mm dia (P.S.)
1
2084
2084
75mm dia (P.S.)
1
5503
5503
90mm dia (P.S.)
1
8047
8047
Butterfly Valve
Providing and fixing uPVC butterfly valves. Tested to a pressure not less
than 10 Kg/Sq.cm. Including rubber gasket, flanges, nuts, bolts, washers complete as required.
110 mm dia (P.S.)
1
11168
11168
160 mm dia (P.S.)
1
17617
17617
Providing and fixing of uPVC Wafer Check Valve non-return valves (PN 10) complete with matching flanges, rubber insertion, nuts, bolts and
washer etc. of following sizes.
90 mm dia (P.S.)
1
5168
5168
110 mm dia (P.S.)
1
6009
6009
160 mm dia (P.S.)
1
11034
11034
Puddles Sleeve
Supply & fixing of following sizes of heavy duty PVC puddle flanges (uPVC pipe(10 kg/cm2) fixed with flanges, length 400 to 600 mm length) on the wall of plantroom, balancing tank and the water body walls & Slab (As required). To be laid in between the steel reinforcement before RCC.
Does not include any civil work.
63 mm dia (P.S.)
1
675
675
110 mm dia (P.S.)
1
1530
1530
160 mm dia (P.S.)
1
3150
3150
Supply, laying, testing and commissioning of following size PVC insulated sheathed copper conductor 1100 V grade unarmoured cable with
required size of sleeves complete as required.
4 x 2.5 sq.mm (P.S.)
10
1300
130
2 x 6 sq.mm (P.S.)
10
1570
157
2 x 2.5 sq.mm (P.S.)
10
1100
110
2 x 1.5 sq.mm (P.S.)
10
900
90
Supply, laying, testing and commissioning of following size PVC insulated sheathed copper conductor flexible multistand wire complete as required.
25 m (P.S.)
15
975
65
G.I. earthing wire 8 gauge from all motor and M.C.C panel to be connected in as approved manner to the general earthing system
complete. 8 Gauge GI Wire (P.S.)
15
2700
180
Providing and fixing M.S. slotted cable tray supported from ceiling at intervals of 60 cms on both ends including cable clips with nuts and bolts welding of support rods with ceiling inserts or through dash fasteners
cutting and making good complete.
300mm wide (P.S.)
15
9750
650
150mm wide (P.S.)
30
13500
450
ELECTRICAL CONTROL PANEL
Supply, installation, testing and commissioning of following swimming pool panel 415 V, 1 / 3 Phase and 50 Hz power distribution system. The panel shall be free standing floor mounting sheet metal enclosed dust and vermin proof confirming to IP-54, compartmentalized design fabricated out of 16 SWG sheet Steel, painting earthing numbering, danger plate as per specifications and drawings. Flush front with aluminium busbars, seperate earth bus bars to be provided throughout the length of the panel the incoming and outgoing feeder breakers, fuses, indicating lamps etc shall be accomadated in a modular multilier arrangement. The panel shall be powder coated through 9 tank process. Adequate size cable alley shall be provided forcable termination.The outgoing feeders inside shall be connected through bus bars/ flexible cable links. Bus bars shall be provided with heat shrinkable sleeves and shall be
colour coded. The panels shall be suitable for cable entry from top to bottom. The panels shall be fabricated after the approval of drawings. Starter shall be provided with MCB/MCCB. Suitable for the specified Kw of motor (as per SLD) AC 3 power contractors. Single phasing preventer, on-off indication Lamps, start stop push buttons. Auto manual selector switch, ammeter with suitable auxillary contact remote control, interlocking etc starter shall be Type 2 coordinated. "c" curve MCB's 10 KA shall be used wherever required.
Incoming: One (1) Nos 200A TP 25 KA MCCB with thermomagnetic based overload and short circuit release. Digital flush mounted 0-200A ammeter with 3 way and OFF selection switch with 3 Nos 200/5 Amp CT. 1 set (3 Nos ) of phase indication lamps 200A 25 KA TPN Aluminium bus bar. It shall be insulated with heat shrinkable sleeves and shall be color coded. Outgoing: Recirculation pump Four (4) Nos DOL starter complete with separate single phasing protection feature. ON/OFF indicating lamps, relay, contractors, start/stop push button, auto/manual selector switch, sufficient nos of potential free spare contacts, etc for suitable HP 3 Nos 6AMP DP MCB of suitable rating with correct thermal range suitable for chemical dosing 3 Nos Toggle switch for LED Pool Lights 4 Nos 6AMP DP MCB of suitable rating with correct thermal range suitable for UV 4 Nos Toggle switch for LED Pool Lights 1 Nos16AMP DP MCB of suitable rating with correct thermal range suitable for Underwater Lights 1 Nos Toggle switch for LED Pool Lights 2 Nos MCCB 63 A TP for Heat Pump - 97 KW
1
345000
345000
Supplying and fixing of semi circle foam fountain with all necessary equipments(including Nozzle, Light, SMPS, Submersible pump, RGB controller, GI Ring, 1mm four core) all as per direction of Engineer in charge ( Analysed rate)
2
662055
331027.5
Supplying and fixing Lily Jet Fountain, With lighting, controlling system with all necessary equipments
Market Rate
4
260000
65000
FIRE HYDRANT SYSTEM
Supplying, installation, testing and commissioning of electric driven terrace pump suitable for automatic operation and consisting of following, complete in all respects, as required: (Terrace Pump)
(a)Horizontal type, multistage, centrifugal, split casing pump of cast iron body & bronze impeller with stainless steel shaft, mechanical confirming to IS : 1520
b) Suitable HP squirell cage induction motor TEFC type suitable for operation on 415 volts, 3 phase, 50 Hz, AC supply with IP55 class of protection for enclosure, horiziontal foot mounted type with Class-'F' insulation, conforming to IS-325.
(c) M.S.fabricated common base plate, coupling, coupling guard, foundation bolts etc.as required.
(d) Suitable cement concrete foundation duly plastered and with anti vibration pads.
900 lpm at 35 m Head (DSR/AOR 2019 4.1)
2
180260
90130.36
Providing and fixing in position the industrial type pressure gauges with gun metal / brass valves complete as required DSR(E&M)DSR 16.8)
2
2135
1067.86
Air Release Valve, Gunmetal, having rubber ball with 1” (25mm) BSP Male threaded inlet (Market Rate) P.S.
2
3036
1518.01
Supplying and fixing air vessel made of 250 mm dia, 8 mm thick MS sheet, 1200 mm in height with air release valve on top and flanged connection to riser, drain arrangement with 25 mm dia gun metal wheel valve with required accessories, pressure gauge and paintingwith synthetic enamel paint of approved shade as required. (DSR/AOR No. 20)
2
32158
16079.46
Providing, laying, of 'C' class heavy duty MS pipe conforming to IS 3589/IS 1239 including Welding, fittings like elbows, tees, flanges, tapers, nuts bolts, gaskets etc. and fixing the pipe on the wall/ceiling with suitable clamp/support frame and painting with two or more coats of synthetic enamel paint of required shade complete as required : (25 mm dia) (DSR/AOR 7.1)
250
105135
420.54
32 mm dia (DSR/AOR 7.2)
120
56464
470.54
40 mm dia (DSR/AOR 7.3)
60
34875
581.25
50 mm dia (DSR/AOR 7.4)
75
52701
702.68
65 mm dia (DSR/AOR 7.5)
80
71714
896.43
80 mm dia (DSR/AOR 7.6)
90
90161
1001.79
100 mm dia (DSR/AOR 7.7)
150
200758
1338.39
Providing, fixing, testing & commissioning of 15mm dia quartzoid bulb type sprinklers of rating 68 degree centigrade with required accessories : (Pendent Sprinkler) (DSR/AOR 21.1)
360
155570
432.14
Providing, fixing, testing & commissioning of 15mm dia quartzoid bulb type sprinklers of rating 68 degree centigrade with required accessories :
Horizontal side wall sprinkler
D.S.R. Item No. 21.3
90
46526
516.96
Supplying, fixing, testing and commissioning of butterfly valve of PN 1.6 rating with bronze/gunmetal seat duly ISI marked complete with nuts, bolts, washers, gaskets conforming to IS 13095 of following sizes as required : 150 mm dia (DSR/AOR 11.6)
4
31067
7766.96
Providing, installation, testing and commissioning of non-return valve of following sizes confirming to IS: 5312 complete with rubber gasket, GI bolts, nuts, washers etc.as required : (150mm dia) (DSR /AOR 14.7)
4
62775
15693.75
Supplying and fixing orifice plate made out of 6 mm thick stainless steel (Grade 304) with orifice of required size to be fitted between flange & landing valve of external and internal hydrants to reduce pressure at the outlet to the level of 3.5 kg/cm2 complete as required. (DSR/AOR 13)
4
4610
1152.68
Supplying and fixing single headed internal hydrant valve with instantaneous Gunmetal/Stainless Steel coupling of 63 mm dia with cast iron wheel ISI marked conforming to IS 5290 (Type -A) with blank Gunmetal/Stainless Steel cap and chain as required : Single headed Gunmetal (DSR/ AOR 9.1)
4
26764
6691.07
Supplying and fixing 63 mm dia, 15 m long RRL hose pipe with 63 mm dia male and female couplings duly bound with GI wire, rivets etc. conforming to IS 636 (type-A) as required : Gun Metal (DSR/AOR 16.1)
4
18528
4632.14
Supplying and fixing first-aid Hose Reel with MS construction spray painted in post office red, conforming to IS 884 complete with the following as required. 20 mm nominal internal dia water hose thermoplastic (Textile reinforced) type -2 as per IS: 12585 20 mm nominal internal dia gun metal globe valve & nozzle.Drum and brackets for fixing the equipmets on wall. Connections from riser with 25 mm dia stop gun metal valve & M.S. Pipe and socket 30 m (DSR/AOR 17.1)
4
30046
7511.61
Supplying & fixing 63 mm dia gun metal short branch pipe with 20 mm nominal internal diameter size nozzle conforming to IS 903 suitable for instantaneous connection to interconnect hose pipe coupling as required : Gun metal (DSR/AOR 18.1)
4
8578
2144.64
Fireman Axe-made of carbon steel with rubber insulated handle tested to 20,000 Volts as per IS:926 Make: NEWAGE (Market Rate)
P.S.
4
4825
1206.43
Fire shaft door fabricated out of M.S. sheet and frame, door size of 1200 (W) x 2100 (h) with 4 mm thick glass, suitable Rubber beading and Locking arrangement and complete door shall be powder coated with red color powder coating P.S.
(Market Rate)
4
59707
14926.84
Supplying and fixing of fire brigade connection of cast iron body with gun metal male instantaneous inlet couplings complete with cap and chain as reqd. for suitable dia MS pipe connection conforming to IS 904 as required : (2 way-100 mm dia M.S. Pipe) (DSR/AOR 19.1)
4
23535
5883.93
Co2 type Fire Extinguisher 4.5 Kgs. Capacity, made from brand new seamless cylinder, as per IS: 7285 and CCE approval, fitted with Discharge hose and horn and wheel type valve with initial Charge as per IS: 15683:2018 specification, bearing ISI Mark & EIL approved. Make: SAFEX PWD SOR Electrical 2018 Item No. 1132
12
143760
11980
Co2 type Fire Extinguisher 6.5Kgs. Capacity, made from brand new seamless steel cylinder, as per IS: 7285 and CCE approval fitted with discharge, hose and horn with wheel type valve mounted on trolley wheels with initial charge as per IS: 16018 : 2012 specification, bearing ISI Mark & EIL approved. Make: PWD SOR Electrical 2018 Item No. 1132(A)
8
159200
19900
Providing and fixing Fire related signages printed on photoluminescent U1000 aluminium sheet of 1.0 mm (+-10%) containing Lumigen II as base chemical, covered under UV stablized coating and of appropriate size including fixing on wall, door, ceiling etc. with proper clamps, hangers, cleats, anchor fasteners etc. complete in all respects as directed by Engineer-in-charge. (Market Rate) P.S.
12
8165
680.49
SUB-HEAD-IV FIRE ALARM SYSTEM Supplying, installation, testing & commissioning of main control and indicating panel made out of 16 SWG MS sheet to accommodate the following items duly powder coated in approved colour with louvers for ventilation, locking arrangement, audio and visual indication for fire alarm and public address system, monitoring system including connections, interconnections etc complete as required. 6 zone panel for fire alarm system 100 watt amplifier racks suitable for operation on 230V AC/24V DC supply conforming to IEC-268-3 complete with all DELHI SCHEDULE OF RATES (E&M) 2018 65 accessories as required- 2 Nos.(one to act as standby) Item No. Description Unit Rate Talk back master station with LED PTT (press to talk) push button for operation on 230V AC/24 V DC supply conforming to IEC-268 for simplex mode of operation/communication suitable for 20 Nos.talk back unit -1 set. Annoucement control desk suitable for selection of different zones selectively and ON ALL CALL switch with visual indication etc., complete as required- 1 set. Amplifier change over switch for inter changing amplifier- 1 No. Monitor panel for loudspeaker complete output selector ON/OFF switch, fuse visual indications etc. complete as required- 1 No. Gooseneck microphone with stand and ON/OFF switch -1 No. Mains ON/OFF switch, fuse indication lamps, DC and AC voltmeters & ammeters terminal blocks etc. complete as required -1 set. Battery charger trickle cum boost to take complete load of fire alarm & PA system complete with all accessories including providing & fixing of 2 nos. 12 volt,30 AH each sealed maintenance free batteries -1 set.
6 Loop Panel.
D.S.R. Electrical 2022 Item No. 17.1.11
2
76939
38469.95
Supplying, installation, testing & commissioning of manual call boxes of MS construction in surface/recess with stainless steel chain & hammer assembly complete with glass and push button etc. as required.
DSR E&M 2022_17.1.3
4
1497
374.29
Supplying, installation, testing & commissioning fire alarm ounder with facility to make announcement, mounted in A.B.S. box with hinged cover plate & suitable for operation with amplifier i/c line matching transformer etc. complete as required.
DSR E&M 2022_17.1.7
4
1550
387.72
Supplying & laying of 2x1.5 sqmm fire alarm armoured cable, 600/1000V rated with annealed copper conductor having glass mica fire barrier tape covered by an extruded layer of cross linkable Ethylene Propylene Runner (EPR) inshulation and LSZH inner bedding, steel wire armouring & FRLS outer sheath complete as required.
DSR E&M 2022_17.5.1
250
70870
283.48
SUB-HEAD-XVI: IT/ NETWORKING, & CCTV SYSTEM-ACTIVE & PASSIVE COMPONENT
PASSIVE COMPONENT( STRUCTURED CABLING SYSTEM PASSIVE) Supply , Installation , Testing and commissioning of CAT 6 UTP cable 23 AWG solid copper conductors for Connectivity of Hub room to End Point. Approved Makes: Belden/Siemon/Panduit/Derwiser/ Rit (Rate as per Office Building BOQ)
1650
76213
46.19
Supply, Installation, Testing & Commissioning of CAT6 information outlet (I/O) for Data, Voice, Wifi and Camera at user end.
Approved Makes: Belden/Siemon/Panduit/Derwiser/ Rit (Rate as per BDA Office Building BOQ)
40
10271
256.78
Supply, Installation, Testing & Commissioning of loaded 24 port CAT6 jack panel for CAT6 cable termination at rack end. (Rate as per BDA Office Building BOQ)
4
33039
8259.75
Supply, Installation, Testing & Commissioning of CAT6 patch cord 3 feet for rack side switch to jack panel connectivity. (Rate as per BDA Office Building BOQ)
25
6419
256.78
Supply, Installation, Testing & Commissioning of CAT6 patch cord 7 feet for information outlet (I/O) to end user device connectivity. (Rate as per BDA Office Building BOQ)
25
6955
278.22
Supply, Installation, Testing & Commissioning of 1, 2 and 4 port face plate white for I/O fixing at user side. (Rate as per BDA Office Building BOQ)
25
3209
128.39
Supply, Installation, Testing & Commissioning of 42 U (600W/1000D) floor mount rack with fans , 2 cable managers , satationary shelf , 2 Nos. of hardware pkts. (Rate as per BDA Office Building BOQ)
1
52062
52062.12
Supply, Installation, Testing & Commissioning of 15U wall mount rack with fans , 2 cable managers , satationary shelf , 2 Nos. of hardware pkts.
(Rate as per BDA Office Building BOQ)
1
10699
10699.15
Supply, Installation, Testing & Commissioning of of Access Switch 24 Port POE+ Access Switches with switching capacity of 128 Gbps, forwarding performance 95 Mpps, having 24 x 10/100/1000BASE-T PoE-plus(RJ45) with minimum PoE budget of 370W and 4 x 10G SFP+ uplink ports, should have support for 9 switch Stacking with bandwidth of minimum 120 Gbps. Should support min 2GB internal DRAM, 2GB internal Flash memory, 32K MAC address, 4k Multicast Routes, Should have static Routing from day 1 and upgradable to support OSPF and VRRP with 1 year support. (Rate as per BDA Office Building BOQ)
1
194724
194724.58
SUB-HEAD-XVII: IP CCTV SYSTEM
Supply, installation, testing and commissioning of 5 MP Dome camera , ONVIF profile S , G& T ,UL , CE , FCC Certified ,1/2.8” Progressive Scan CMOS ,2.7 mm to 12 mm motorized varifocal lens , Quad stream with each stream support H.265+ compression simultaneously ,min illumination : 0.01 Lux @ (F1.2,AGC ON), 0 Lux with IR , Shutter speed : 1 / 5s ~ 1 / 100,000 s ,120 dB WDR , Compression : H.265+ ,H.265 ,H.264+ H.264 .SD card support upto 128GB , Alarm trigger - 1 input / 1 output , frame rate : Main stream should support 25 fps@5MP ,Edge analytics : line crossing , perimeter intrusion ,Face detection(deep learning) , pedestrian detection ,cross counting , stationary object , In built IR LED , IR Distance upto 40 meters , IP 67 , IK10 ,POE.
(Rate as per BDA Office Building BOQ)
18
362059
20114.41
Supply, installation, testing and commissioning of 5 MP Bullet camera , ONVIF profile S ,G & T . UL , CE , FCC Certified ,1/2.8” Progressive Scan CMOS ,2.7 mm to 12 mm motorized varifocal lens , Quad stream with each stream support H.265+ compression simultaneously ,min illumination : 0.01 Lux @ (F1.2,AGC ON), 0 Lux with IR , Shutter speed : 1 / 5s ~ 1 / 100,000 s ,120 dB WDR , Compression : H.265+ ,H.265 ,H.264+ H.264 .SD card support , Alarm trigger - 1 input / 1 output , frame rate : Main stream should support 25 fps@5MP , Edge analytics : line crossing , perimeter intrusion ,Face detection (deep learning) , pedestrian detection ,cross counting , stationary object , In built IR LED , IR Distance upto 50 meters , IP 67 , IK 10 housing , POE.
(Rate as per BDA Office Building BOQ)
24
503288
20970.34
Supply, installation, testing and commissioning of 64 channel NVR , ONVIF compliant , recording bandwidth 640 Mbps , output interface 1 HDMI (up to 4K), 1 VGA , Alarm in/out :16ch in / 4ch out , 1 X RJ45 ethernet , iOS smartphone support , 8 HDD support , each HDD slot support upto 8 TB HDD , RAID support , 1x3.0 USB for backup /upgrade , 2x 2.0 USB for mouse .Edge analytics of poposed cameras must be integrated with NVR . Artificial Intelligence Support having face recognition with compatible deep learning supported cameras, AI-Face registered quantity upto 10,000 ,A.I maximum captured quantity 200,000. . UL,CE,FCC certified.
(Rate as per BDA Office Building BOQ)
1
276173
276173.39
Supply, Installation, Testing & Commissioning of 8TB Surviellance Hard Disk. (Rate as per BDA Office Building BOQ)
4
97576
24394.07
Supply, Installation, Testing and Commissioning of Full HD 55" LED Professional Display Panel. (Rate as per BDA Office Building BOQ)
1
73182
73182.2
Supply, Installation, Testing and Commissioning of 24 port L2 Managed switch having port density 24 Nos. of 10M/100M/1G RJ45 Port POE/POE+ ports , 4 Nos. of 1G/10G SFP+ Port , 1X console port , Available POE power 370 W , 128 Gbps switching bandwidth , 32K MAC address support , Support L2 feature STP, RSTP ,MSTP . Support 802.1Q VLAN , port based VLAN , 4K VLAN entries , MAC based VLAN , IP subnet based VLAN . Support IEEE 802.3ad LACP . L3 features - static routing , DHCP server , Device Management system - topology view , floor view , map view , dashboard , traffic monitoring , cable diagnostics.CE,FCC certified
(Rate as per BDA Office Building BOQ)
1
194724
194724.58
Supply, Installation, Testing and Commissioning of Workstation PC: Intel(R) Core(TM) i7-3770 Processor (8M Cache, up to 3.90 GHz); RAM: 8GB (1x8GB) Non-ECC DDR3 1600MHz ; Keyboard: 12 function keys; Chassis: Tower/Workstation; DVD: 8X Slimline DVD+/-RW, Data Only; Dual Graphics Card; Network interface card: Integrated Intel(R) 82579LM Gigabit1 Ethernet LAN 10/100/1000; Hard disk: 250GB, 7200 RPM 3.5" SATA 6Gb/s Hard Drive; Operating system: Windows 7 Professional 64 Bit or latest
(Rate as per BDA Office Building BOQ)
1
96720
96720.34
Supplying and fixing of following sizes of medium class PVC conduit along with accessories in surface/recess including cutting the wall and making good the same in case of recessed conduit as required. 25mm dia
D.S.R. Item No. 1.21.2
250
28340
113.36
Supplying and fixing of following sizes of medium class PVC conduit along with accessories in surface/recess including cutting the wall and making good the same in case of recessed conduit as required. 32mm dia
D.S.R. Item No. 1.21.3
150
21579
143.86
HVAC SYSTEM
Variable refrigerant Volume/Flow System Outdoor Unit
Supply, Installation, Testing & Commissioning of modular type Variable Refrigerant Flow / Variable Refrigerant Volume air cooled outdoor units suitable for cooling and heating, having all hermitecally sealed inverter type scroll compressor(s), minimum two compressor for above 14 HP modules, microprosessor based controller, top discharge type condensing unit(s), with R 410 A Refrigerant, vibration isolators, with suitable foundation etc. complete as required, The unit shall deliver the rated capacity at AHRI conditions and work even at 500C ambient temperature without tripping. The unit shall be suitable to wok on 400V +/- 10%, 3 Phase, 50Hz AC power supply. The unit shall be filled with first charge of the refrigerant and ready for use as required. The COP at AHRI conditions shall not be less than 3.1 and IEER not less than 6.5.
8HP(As per DSR_VRF/VRV _2019_1.1) (Rate=20618.15X8)
(As per Cost Index 2019: 289 , Cost Index 2024: 363, Rate 16415x363/289)=
1
164945
164945.2
12 HP(As per DSR_VRF/VRV _2019_1.1) (Rate=20682.90X12)
(As per Cost Index 2019: 289 , Cost Index 2024: 363, Rate 16415x363/289)=20682.90
1
247417
247417.79
Indoor Unit Cassette Type
Supply, Installation, Testing & Commissioning of following minimum capacity 4-way flow VRF/VRF Cassette type indoor ceiling mounted unit equipped with synthetic washable media pre filter, fan section with low noise fan/dynamically balanced blower, multispeed motor, coil section with DX Copper coil, electronic expansion valve, outer cabinet, drain pump, grill, necessary supports, vibration isolator, cordess remote control etc., suitable for operation on single phase 230V + 10%, 50Hz AC supply, complete, as required. The unit shall have automatic force shut down provision in case of fire on receiving signal from BMS system or fire panel of the building. The cooling capacity of indoor unit will be at air inlet conditions of 27 Degree C DB and 19 Degree C WB temperature.
3.2 TR 4 Way VRV/VRF Cassette Unit(As per DSR_VRF/VRV _2019_2.8)
(As per Cost Index 2019: 289 , Cost Index 2024: 363, Rate 32787x363/289)=41182.29
4
164729
41182.29
2.8 TR 4 Way VRV/VRF Cassette Unit(As per DSR_VRF/VRV _2019_2.5)
(As per Cost Index 2019: 289 , Cost Index 2024: 363, Rate 32015 x 363/289)=40212.61
4
160850
40212.61
Indoor Unit High Wall Type
Supply, installation, testing and commissioning of following minimum capacity VRV/VRF High wall type Indoor unit equipped with washable synthetic media pre-filter, fan section with low noise fan/dynamically balanced blower, multi speed motor, coil section with DX copper coil, electronic expansion valve, outer cabinet, drain pump, cordless remote control, drain pan, necessary accessories etc., suitable for operation on 230V±10%, 50Hz, single phase AC supply, complete as required. The unit shall have automatic force shut down provision in case of fire on receiving signal from BMS System. The cooling capacity of indoor unit will be at air inlet conditions of 27 Degree C DB and 19 Degree C WB temperature.
1.65TR(As per DSR_VRF/VRV _2019_3.6)
(As per Cost Index 2019: 289 , Cost Index 2024: 363, Rate 21746.00 x 363/289)=27314.18
1
27314
27314.18
Indoor Unit Ductable Type
Supply, Installation, Testing & Commissioning of following minimum capacity and external static pressure VRF/VRV ceiling mounted ductable type indoor unit equipped with washable synthetic media pre-filter, fan section with low noise fan/dynamically balanced blower, multispeed motor, coil section with DX copper coil, electronic expansion valve, corded remote control, outer cabinet, vibration isolators, drain pan, other necessary supports etc., suitable for operation on single phase AC supply 230 V + 10%, 50Hz, complete as required. The unit shall have automatic force shut down provision in case of fire on receiving signal from BMS system or fire panel of the building. The cooling capacity of indoor unit will be at air inlet conditions of 27 Degree C DB and 19 Degree C WB temperature.
Mid Static Ductable Units (Minimum 45 Pascal External Static Pressure)
3.40TR(As per DSR_VRF/VRV _2019_4.15)
(As per Cost Index 2019: 289 , Cost Index 2024: 363, Rate 47651 x 363/289)=59825.29
1
59852
59852.29
Supply Installation, testing & commissioning of Y-joints for various size of Refrigerant pipe including insulation. (As per MR-1) (Rate=4123/1.18)
10
34940
3494.07
Centralized controller
Supply Installation, testing & commissioning of Main Intelligent touch screen central controller system including all the accessories suitable to operate, monitor, on/off, temperature setting of all the indoor units individually complete as required and as specified. (As per MR-2) (Rate=80703/1.18)
1
68392
68392.37
Copper Refrigerant Piping
Supply, Installation, Testing & Commissioning including vaccumiazation and Nitrogen testing of following nominal sizes of soft/hard drawn copper refrigerant piping for VRV/VRF system, complete with fittings, with suitable adjustable ring type hanger supports, jointing/brazing including accessories, insulated with with Class-O closed cell elastometric nitrile rubber insulation of specified thickness as given below for Suction and Liquid lines, exposed piping shall be protected with UV & water protective coating, all accessories as per specifications etc. as required:
6.4 mm dia (OD) (Soft drawn) with tube thickness 1.2 mm with 19 mm thick insulation (As per DSR_VRF/VRV _2019_5.1)
(As per Cost Index 2019: 289 , Cost Index 2024: 363, Rate 245.00x363/289)=307.73
30
9231
307.73
9.5 mm dia (OD) (Soft drawn) with tube thickness 1.2 mm with 19 mm thick insulation(As per DSR_VRF/VRV _2019_5.2)
(As per Cost Index 2019: 289 , Cost Index 2024: 363, Rate 331.00x363/289)=415.75
60
24945
415.75
12.7 mm dia (OD) (Soft drawn) with tube thickness 1.2 mm with 19 mm thick insulation(As per DSR_VRF/VRV _2019_5.3)
(As per Cost Index 2019: 289 , Cost Index 2024: 363, Rate 466.00x363/289)=585.32
45
26339
585.32
15.86 mm dia (OD) (Soft drawn) with tube thickness 1.2 mm with 19 mm thick insulation(As per DSR_VRF/VRV _2019_5.4)
(As per Cost Index 2019: 289 , Cost Index 2024: 363, Rate 588x363/289)=738.56
45
33235
738.56
19 mm dia (OD) (Hard drawn) with tube thickness 1.2 mm with 19 mm thick insulation(As per DSR_VRF/VRV _2019_5.5)
(As per Cost Index 2019: 289 , Cost Index 2024: 363, Rate :707.00x363/289)=888.03
30
26640
888.03
22.2 mm dia (OD) (Hard drawn) with tube thickness 1.2 mm with 19 mm thick insulation(As per DSR_VRF/VRV _2019_5.6)
(As per Cost Index 2019: 289 , Cost Index 2024: 363, Rate :865.00x363/289)=1086.49
30
32594
1086.49
28.58 mm dia (OD) (Hard drawn) with tube thickness 1.2 mm with 19 mm thick insulation(As per DSR_VRF/VRV _2019_5.8) (As per Cost Index 2019: 289 , Cost Index 2024: 363, Rate 1108.00x363/289)=1391.71
15
20875
1391.71
34.9 mm dia (OD) (Hard drawn) with tube thickness 1.62 mm with 19 mm thick insulation(As per DSR_VRF/VRV _2019_5.10)
(As per Cost Index 2019: 289 , Cost Index 2024: 363, Rate x363/289)
10
15449
1544.95
41.27 mm dia (OD) (Hard drawn) with tube thickness 1.62 mm with 19 mm thick insulation(As per DSR_VRF/VRV _2019_5.12)
(As per Cost Index 2019: 289 , Cost Index 2024: 363, Rate x363/289)
15
24662
1644.18
Drain Piping
Supplying & fixing of UPVC drain piping with all fitting such as bends, tees etc. necessary clamps, adequate support duly insulate with 9 mm nitrile rubber insulation complete as per technical specifications, requirement, standardard and drawings complete as required.
50 mm dia(As per MR-3) (Rate=298/1.18)
15
3788
252.54
40 mm dia(As per MR-3) (Rate=204/1.18)
10
1728
172.88
32 mm dia(As per MR-3) (Rate=157/1.18)
30
3991
133.05
25 mm dia (As per MR-3) (Rate=121/1.18)
15
1538
102.54
Inline Fans
Supply, Installation, testing and commissioning circular direct driven / cabinet inline fans of G.I. construction complete with centrifugal fan with motor, accoustically lined, canvass connection at inlet and outlet complete with electric panel with MCB and relays, with 5 Rm cabling and earthing complete as per standards, requirement and drawings.
350 cfm 15 mmwg S.P(As per MR-4) (Rate=15743/1.18)
1
13341
13341.53
300 cfm 15 mmwg S.P(As per MR-4) (Rate=14056/1.18)
1
11911
11911.86
250 cfm 15 mmwg S.P(As per MR-4) (Rate=13102/1.18)
1
11103
11103.39
200 cfm 15 mmwg S.P(As per MR-4) (Rate=13102/1.18)
1
11103
11103.39
150 cfm 15 mmwg S.P(As per MR-4) (Rate=12662/1.18)
1
10730
10730.51
100 cfm 15 mmwg S.P(As per MR-4) (Rate=12662/1.18)
1
10730
10730.51
Propeller Type Fan
Supply, installation, testing and commissoning of propeller type fan for exhaust air complete with in and out gravity louvers, 3 pin socket with 5RM cabling complete as per specifications, requirement, standard and drawings.
200 mm dia, 5 mmwg S.P. (As per MR-5) (Rate=13039/1.18)
1
11050
11050
Exposed Copper Pipe Coating
Supplying and fixing of UV/fire/water, thermal protective coating, with canvas/glass fibre cloth, coating on copper pipe insulation by wrapping canvas/glass fibre cloth dipped in star bond/poly bond 30-36 complete as per specifications and drawings.(The price should be quoted considering minimum 3 coats of 30-36 chemical). (As per MR-6) (Rate=587/1.18)
30
14923
497.46
Packaged Type Airwasher
Supply, installation, testing and commissioning of floor mounted CELLULOSE FILL AIR-WASHER complete with double skin construction fabricated out of extruded aluminium sections with 0.8 mm thick pre-plasticised GI sheet on out side and 0.8 mm thick plane GI sheet inside with 25 mm thick insulation, 40 Kg / m3 density PUF insulation in between. The unit shall comprise of supply fan sections with DIDW backward curve fans (efficiency not less than 75%) suitable for static pressure as required, belt drive package with TEFC drive motor of efficiency class IE3 suitable for 415 ± 10% V, 50Hz, 3 Phase AC supply, giving 95% adiabatic saturation efficiency at 500 FPM air velocity across pads, factory assembled and complete with 16 gauge GI casing for Air washer section, 18G SS-304 water tank, Cellulose fill, water distribution header, PVC piping, butterfly valves, for quick fill, isolation of tank, pumps and brass strainers, Y strainers, fire rated flexible duct connections & aluminium volume control damper at blower discharge and necessary fittings, belt drive package, necessary vibration isolation arrangement etc. complete as per specification and of following capacities. The fan and motor shall be mounted on aluminium extruded section.The unit shall also include provision of GSS partitions duly reinforced at intake side of air washer and GSS louvers with bird-screen synthetic washable filters and four bend PVC drift eliminators and horizontal monoblock pumps of suitable rating, factory mounted on mild steel channel base with electric motor for circulation of water. Pumps shall be aligned and suitable for 415±10% volts, 50 cycles 3 phase power supply. One No. 3 phase isolator switch in weather proof enclosure shall be provided near motor complete as required confirming to specification.
3,000 CFM, 50 mmwg Static Pressure (As per MR-7) (Rate=205427/1.18)
1
174090
174090.68
Exhaust Scrubber
Supply, installation, testing & commissioning of double skin exhaust scrubber of 0.6 mm inner and outer skin construction fabricated from precoated sheet blower housing with DIDW backward curved centrifugal blower with fan motor and belt drive arrangement with totally enclosed fan cooled class F insulation, with IP 55 protection, TEFC high efficiency motor type IE-3 suitable for 415+-10% volts, 50 HZ, 3 Phase A.C. supply, all accessories like common base frame, fan, motor pulley, belts, fire proof canvass connection, vibration isolator, prefilters, wet scrubber section, spray, nozzels, filters, M.S. frame for supports etc.complete as per specifications, requirement, standardard and drawings.
4,000 CFM, 65 mmwg Static Pressure (As per MR-8) (Rate=220100/1.18)
1
186525
186525.42
Ducting
Supply, installation, balancing and commissioning of factory fabricated GSS sheet metal rectangular ducting complete with neoprene rubber gaskets, elbows, splitter dampers, vanes, hangers, supports etc. as per approved drawings and specifications of following sheet thickness complete as required.
G.I. Sheet Metal Ducting (Rectangular)
Thickness 0.63 mm sheet (As per DSR_E&M _2022_16.12.1.1) (Rate=1080/1.12)
120
115714
964.29
Thickness 0.80 mm sheet (As per DSR_E&M _2022_16.12.1.2) (Rate=1263/1.12)
80
90214
1127.68
Thickness 1.0 mm sheet (As per DSR_E&M _2022_16.12.1.3) (Rate=1381/1.12)
30
36991
1233.04
Thickness 1.25 mm sheet (As per DSR_E&M _2022_16.12.1.4) (Rate=1836/1.12)
45
73768
1639.29
Grilles / Diffuser
Supply, installation, testing and commissioning of Aluminium extruted powder coated supply and return air grilles/ diffusers as per specifications and drawings (Approval of colour shall be taken from Architects/Consultants).
Supplying & fixing of powder coated extruded aluminium Supply Air Grills with aluminium volume control dampers as per specifications.(As per DSR_E&M _2022_16.15)
(Rate=9105/1.12)
15
121941
8129.46
Supplying & fixing of powder coated extruded aluminium Return Air Grills with louvers but without volume control dampers complete as required.(As per DSR_E&M
_2022_16.16) (Rate=5910/1.12)
15
79151
5276.79
Supply, fixing, testing & commissioning of Return air diffussers of powder coated aluminium without volume control dampers with anti smudge ring & removable core.(As per
DSR_E&M _2022_16.18) (Rate=8121/1.12)
15
108763
7250.89
Louvers
Supply and fixing of Fresh / Exhaust air Aluminium extruded with bird screen, damper adjustable louvers as per specifications and drawings.(As per MR-9) (Rate=12986/1.18)
15
165076
11005.08
Volume Control Damper
Supply, installation, testing and commissioning of GI volume control duct damper complete with neoprene rubber gaskets, nuts, bolts, screws linkages, flanges etc, as per specifications. (As per DSR_E&M _2022_16.13) (Rate=7046/1.12)
15
94366
6291.07
Flexible Duct
Supply of 25 mm glass wool insulated double lamination of metalize polister film parmantely bounded to a coated spring wire, helix and resistant construction of tear and pincture branch and collor where ever suitable of following sizes. Connected at both ends with necessary jublie clamps
150 MM Dia(As per MR-10) (Rate=404/1.18)
8
2738
342.37
Isolator
Supplying & installation of weather proof isolator with suitable rating near each outdoor unit and complete as required. 63 Amps(As per MR-11) (Rate=5136/1.18)
2
8705
4352.54
40 Amps(As per MR-11) (Rate=5136/1.18)
2
8705
4352.54
Control & Transmission Wiring
Supplying & fixing control cum transmission wiring of copper in heavy duty conduits PVC conduits between indoor and out door unit. (As per MR-12) (Rate=113/1.18)
180
17236
95.76
Power Cabling
Supply & fixing of PVC sheathed Aluminium / Copper cables for various equipments through walls/ceiling with appropriate clamps & fixing arrangement as per specifications and drawings.
3C - 4 sqmm (Aluminium) for Airwasher & Scrubber(As per MR-14) (Rate=126/1.18)
30
3203
106.78
3C - 2.5 sqmm (Aluminium) for Airwasher & Scrubber pump(As per MR-14) (Rate=117/1.18)
30
2974
99.15
4C - 16 sqmm (Copper) (As per MR-14) (Rate=1102/1.18)
20
18678
933.9
4C - 10 sqmm (Copper) (As per MR-14) (Rate=753/1.18)
20
12762
638.14
Cable Tray
Supplying and installation of following size of perforated painted with powder coating M.S. cable trays with perforation not more than 17.5%, in convenient sections, joined with connectors, suspended from the ceiling with M.S. suspenders including bolts & nuts, painting suspenders etc. as required.
150 mm width X 50 mm depth X 1.6 mm thickness(As per DSR_E&M _2022_4.1.2) (Rate=604/1.12)
30
16178
539.29
300 mm width X 50 mm depth X 1.6 mm thickness(As per DSR_E&M _2022_4.1.4) (Rate=777/1.12)
30
20812
693.75
450 mm width X 50 mm depth X 1.6 mm thickness(As per DSR_E&M _2022_4.1.6) (Rate=1137/1.12)
30
30455
1015.18
Earthing
Providing and fixing 25 mm X 5 mm G.I. strip on surface or in recess for connections etc. as required. (As per DSR_E&M _2022_5.15) (Rate=244/1.12)
30
6535
217.86
Providing and fixing 6 SWG dia G.I. wire on surface or in recess for loop earthing as required.(As per DSR_E&M _2022_5.16) (Rate=70/1.12)
30
1875
62.5
Ductable Split Unit
Supplying,installation,testing & commissioning of ductable type split unit air-conditioners with evaporator with coil, fan and fan motor, aircooled condenser with hermatically sealed scroll compressor, condenser coil, propeller fans controls, mounting stand for ODU, control panel, corded remote, canvass connection as per standards, requirement and drawings.
3.0 Tons(1 Working & 1 Standby) for Server Room(As per MR-15) (Rate=88040/1.18)
8
596881
74610.17
Refrigerant Piping (For Split)
Supplying & installation copper soft/hard refrigerant piping along (Circuit length) with control cabling and earthing should be insulated with 9 mm thick pipe section of nitrile rubber complete in all respect.
3.0 Tons Ductable Split Unit(As per MR-16) (Rate=1981/1.18)
30
50364
1678.81
Evaluation Notes How It Works ?
Potential Partner
Select Your Requirements