Public Works Department Tender
BidAssist is a very user-friendly website that lets us explore new opportunities which further helps in the growth of the business. We can get any information regarding any e-tender the Tripura government has posted on its website in a very hassle-free manner. BidAssist is designed in such a manner so as to provide information on all government tenders at one place without any inconvenience.
Public Works Department - PWD Tender
Eprocure
Opening Date23 Nov 2024
Closing Date13 Dec 2024
Tender Amount₹ 34,45,897
Costs
EMD
₹ 68,918Document Cost
₹ 1,000Tender Fee
Refer Documents
Summary
Special Revamping Renovation Of Tripura Public Service Commission Office At Agartala Including Sanitary Installation And Construction Of Car Parking Area With Truss Excluding Internal Electrification And Mechanical Work During The Year- 2024 25 Phase
Description
Scription for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user
Contact
Tender Id
2024_CEPWD_55165_1Tender No
93/SE-II/PWD(RandB)/2024-25Tender Authority
Public Works Department ViewPurchaser Address
-Website
http://https://pwd.tripura.gov.in/
GEM & Bid Advisory Services
Get portal registration, tender bidding, product/service listing or vendor/MSME certification services at a nominal cost
BOQ Items
Dismantling GS sheet roofing including ridges, hips, valleys, gutters wind ties etc. including dismembering and stacking of serviceable materials and unserviceable materials separately with all lifts and upto a lead of 50 m etc.complete as per
direction of the Engineer- in-charge.
855
92
79344
Dismantling tile work in floors and roofs laid in cement mortar including stacking material within 50 metres lead. i) For thickness of tiles 10 mm to 25 mm
230.64
41
9571.56
Dismantling wood work in frames, trusses, purlins and rafters up to 10 metres span and 5 metres height including stacking the material within 50 metres lead :
i) Of sectional area 40 sq cm and below.
9.2
10
94.76
Dismantling doors, windows and clerestory windows (steel or wood) shutter including chowkhats, architrave, holdfasts etc. complete and stacking within 50 metres lead :
i) Of area 3 sqm and below.
36
211
7621.2
Taking out existing wooden door shutter, repair by cutting, painting etc. and refixing of repaired door shutters to existing door frames, including replacement of hinges with screws, etc. as required, all complete as per the direction of the Engineer-in-charge.
10
259
2597
Earth work in excavation by mechanical means (Hydraulic excavator) / manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan) including dressing of sides and ramming of bottoms, lift upto 1.5 m, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m.
25
231
5790
Supplying and filling in plinth, under floor, foundations etc. with sand (fine) from local quarry with all lifts including spreading in horizontal layers, watering, grading to required slope, ramming, consolidating and compacting each layer by using plate compactor or by any suitable method complete.
13.11
1177
15434.4
Providing and laying in position cement concrete of specified grade excluding the cost of centring and shuttering -
-All work upto plinth level:
i) 1:3:6 ( 1 Cement: 3 fine sand : 6 graded well burnt brick aggregate 40 mm nominal size)
13.11
9295
121866.63
Centering shuttering including struttings, propping etc. and removal of form work for:
ii) Lintels, beams, plinth beams, girders, bressumers and cantilevers with wooden plank
9.6
391
3753.6
First class brick work in foundation and plinth including cost of all materials as required complete:- In cement mortar 1:4 ( 1 cement : 4 fine sand ).
1.48
9845
14570.9
First class brick work in superstructure above plinth level & upto floor-five level including cost of all materials as required complete:- i) In cement mortar 1:4 ( 1 cement : 4 fine sand ).
7.5
11410
85576.43
Half brick masonry work with first class bricks in foundation and plinth including cost of all materials as required complete:-In cement mortar 1:4 ( 1 cement : 4 fine sand ).
42
1311
55095.6
Half brick masonry work with first class bricks in superstructure upto floor five level including cost of all materials as required complete:- In cement mortar 1:4 ( 1 cement : 4 fine sand ).
7.56
1533
11593.26
Providing and laying cement concrete 1:2:4 (1 cement : 2 fine sand : 4 graded well burnt brick aggregate) flooring finished with a floating coat of neat cement including cement slurry, rounding of edges and strips etc. complete. (i)25 mm thick with 12.5 mm well burnt brick aggregate
9.36
465
4353.34
Neat cement punning.
50
56
2840
Providing, mixing and applying SBR polymer (of approved make) modified Cement mortar in proportion of 1:4 (1 cement: 4 fine sand with polymer minimum 2%
by wt. of cement used) as per specifications and as per direction of the Engineer-in-charge.
Note: Measurement and payment: The pre-measurement of thickness shall be done just after the surface
preparation is completed and Payment under this item shall be made only after proper wet curing has been done and surface has been satisfactorily evaluated by
sounding / tapping with a blunt metal instrument and/or the 75mm size cube crushing strength at the end of 28 days to be not less than 30 N/ mm2)
i) 12 mm average thickness.
347.12
260
90459.47
Providing, mixing and applying SBR polymer (of approved make @ minimum 2% by wt. of cement used)
modified plain/reinforced cement concrete for structural members having minimum characteristic compressive strength [with ordinary portland cement, fine sand and graded stone aggregate of 10mm maximum size in proportion as per design criteria] with specified average thickness.
Note: Rates shall be for finished surface area of concrete and shall include the cost of labour, concrete and appropriate approved Super-Plasticiser for rendering concrete as flowable and SBR polymer but shall exclude cost of reinforcement, bond coat, Shear Keys, centering and shuttering, strutting, propping etc (Payment under this item shall be made only after proper wet curing has been done and surface has been satisfactorily evaluated by sounding/tapping with a blunt metal instrument)
i) 50mm thick in Grade M 25 with cement content not less than 418 kg per cum
18.75
754
14139.38
Providing wood work in frames of doors, windows, clerestory windows and other frames, wrought framed and fixed in position :
(i) Local Teak wood
0.34
106388
36172.02
Providing wood work in frames of false ceiling, partitions etc. sawn and put up in position :
(i) Local Teak wood
0.08
98813
7509.82
Providing and fixing panelled / or panelled and glazed shutters for doors, windows and clerestory windows including ISI marked bright finished / black enamelled M.S butt hinges with necessary screws excluding panelling and or glazing, which will be paid for separately but including the wooden beading of 20 × 12 mm for fixing panelling and or glazing as per direction of Engineer-In-Charge.
i) Local Teak wood
a)35 mm thick shutters
9.07
2519
22851.87
Providing and fixing ISI marked flush door shutters conforming to IS: 2202 (Part I) non-decorative type, core of block board construction with frame of 1st
class hard wood and well matched commercial 3 ply veneering with vertical grains or cross bands and
face veeners on both faces of shutters.
(i) 35 mm thick including ISI marked Stainless Steel butt hinges with necessary screws.
12.6
2313
29155.14
Providing and fixing curtain rods of 1.25 mm thick chromium plated brass plate, with two chromium plated brass brackets fixed with C.P. brass screws and wooden plugs, etc., wherever necessary complete : i) 25 mm dia.
19.5
641
12513.15
Providing and fixing M.S. grills of required pattern in frames of windows etc. with M.S. flats, square or round bars etc. all complete. i) Fixed to openings /wooden frames with rawl plugs screws etc.
300
169
50910
Providing and fixing factory made P.V.C. door frame of size 50x47mm with a wall thickness of 5mm, made out of extruded 5mm rigid PVC foam sheet mitred at corners and joined with 2 Nos. of 150mm long brackets of 15x15mm M.S. square tube, the vertical door profiles to be reinforced with 19×19mm MS
square tube of 19 gauge, EPDM rubber gasket weather seal to be provided through out the frame . The door frame to be fixed to the wall usuing MS screws of
65/100 mm size complete as per manufacturers' specification and direction of Engineer-In-Charge.
20
495
9910
Providing and fixing 28 mm thick door shutter made of solid PVC foam profile with homogenous fine cellular structure having smooth outer integral skin having 71mm width & 28mm thick as vertical & horizontal styles. Joints are made using solvent adhesive and GI ‘C sections (39mm x 19mm x 0.6mm thick) or M S pipe (40mm x 20mm ) stiffener frame insert & telescopic polymeric ‘L’ corners .The panel shall be filled with 3mm thick high - pressure compact laminate as per manufacturer’s specifications and directions of the Engineer-incharge, cover moulding shall be provided for covering fixing screws and elegant look.( for W.C.
bathroom door shutter).
5.88
3658
21510.22
Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS : 1285, fixing with dash fasteners of required dia and size, including necessary filling up of gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, aluminium snap beading for glazing / paneling, C.P. brass / stainless steel screws, all complete as per architectural drawing and the direction of Engineerincharge. (Glazing and paneling and dash fasteners to be paid for separately) :
i) For fixed portion of approved quantity
a) Anodised aluminium (anodised transparent or dyed to required shade according to IS: 1868, Minimum anodic coating of grade AC 15).
150
474
71115
For shutters of doors, windows & ventilators including providing and fixing hinges / pivots and making provision for fixing fittings wherever required including the cost of EPDM rubber / neoprene gasket required ( Fittings shall be paid for separately ):
i) Anodised aluminium (anodised transparent or dyed to required shade according to IS: 1868, Minimum anodic coating of grade AC 15).
150
555
83250
Providing and fixing glazing of approved quality in aluminium doors, windows, ventilator, shutters and partition etc. with EPDM rubber / neoprene gasket etc. complete as per architectural drawing and the direction of Engineer-in-charge (Cost of snap beading shall be paid in basic item) :
i) With glass/ float glass panes of 4.0 m thickness ( weight not less than 10.0 kg / sqm )
27.22
1161
31626.92
Providing 40 × 5 mm flat iron hold fast 40 cm long including fixing to frame with 10 mm diameter bolts, nuts and wooden plugs and embedding in cement concrete block 30 × 10 × 15 cm 1:3:6 mix (1 cement:3 fine sand:6 graded stone aggregate 20mm nominal size)
100
190
19010
Providing and fixing aluminium sliding door bolts ISI marked anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade with nuts and screws etc. complete :
i) 300x16 mm
10
287
2870
Providing and fixing aluminium tower bolts ISI marked anodised (anodic coating not less than grade
AC 10 as per IS : 1868 ) transparent or dyed to required colour or shade with necessary screws etc. complete i)300x10 mm
20
135
2704
ii ) 150 x 10 mm
30
87
2619
Providing and fixing aluminium handles ISI marked anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade with necessary screws etc. complete :
i) 125 mm
15
68
1032
Providing and fixing IS : 3564 marked Aluminium die cast body tubular type universal hydraulic door closer with necessary accessories and screws etc.
complete.
10
1243
12434
Providing and fixing aluminium hanging floor door stopper ISI marked anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour and shade with necessary screws etc. complete.
i) Twin rubber stopper
10
74
743
Providing and fixing hard drawn steel wire fabric 75 x 25 mm mesh of weight not less than 7.75 Kg per sqm to window frames etc. including 62 x 19 mm beading of Gamair wood.
27.22
1403
38195.1
Supply & installation of pre-painted Galvalume sheets for roofing/cladding (size, shape and pitch of corrugation as approved by Engineer-in-charge) in 550mpa steel grade, made out of Cold Rolled Steel
coated with Zinc-Aluminium alloy coating of 43.5% Zn, 55% Al and 1.5% Silicon confirming to ASTM
A792/A792M and AS1397, Alloy coating AZ150/AZ70, colour coated with high quality Polyester coating, top coated of modified polyester of 20 micron, back side coat of 5 micron, having epoxy primer coat of 5 micron on both side. Sheet should have protective guard film of 25 microns minimum to avoid scratches while transportation and should be supplied in single length upto 12 metre or as desired by Engineer-incharge.
120
939
112704
Supply & installation of pre-painted Galvalume sheets roofing accessories in 550mpa steel steel grade, made out of Cold rolled steel coated with Zinc-Aluminium alloy coating of 43.5% Zn, 55% Al and 1.5% Silicon confirming to AASTM A792/A792M and AS1397, Alloy
coating AZ150/AZ70, colour coated with high quality polyester coating, top coated of modified polyester of 20 micron, back side coat of 5 micron, having epoxy primer coat of 5 micron on both side. Sheet should have protective guard film of 25 microns minimum to avoid scratches while transportation. Sheet should have protective guard film of 25 microns minimum to avoid scratches while transportation. The sheet
shall be fixed using self drilling /self tapping screws with EPDM washers complete for Ridges/Valley/Gutter/Flashing of width 610mm:
i) 0.50mm thickness
50
517
25895
Providing ridges or hips of width 60 cm overall width plain G.S. sheet fixed with polymer coated J or L hooks, bolts and nuts 8 mm dia G.I. limpet and bitumen washers complete.
i) 0.63mm thick with zinc coating not less than 275gm/m2
30
730
21924
Aluminium Composite Panels of 4mm total thickness with Top coil – 0.50mm AA3003 / AA3105 / AA5005 Grade manufactured as per IS-737 1986, FR Grade Class B1 with 3mm Mineral Core with minimum 70-72% Inorganic content (Aluminium Hydroxide and Magnesium Hydroxide) 28-30% Organic content (LDPE) conforming to ASTM E-119-16,18 and EN 13501-1, class B1,and Bottom coil – 0.50mm AA3003 / AA3105 / AA5005 Grade, manufactured as per IS-737 1986 with minimum 25 microns lead free PVDF Coating conforming to AAMA2605 on top coil and Service coating on Back Coil (4 - 6 microns) having minimum panel weight of 7.5 Kg/m2
15
5072
76093.5
Prelaminated particle board of approved quality with decorative lamination on both side.
35
1131
39606
Providing and fixing glazing of approved quality in aluminium doors, windows, ventilator, shutters and partition etc. with EPDM rubber / neoprene gasket etc. complete as per architectural drawing and the direction of Engineer-in-charge (Cost of snap beading shall be paid in basic item) :- With float glass panes of 4.0 mm thickness ( weight not less than 10.0 kg / sqm )
12.6
1161
14639.94
Providing and fixing false ceiling at all height including providing and fixing of frame work made of special sections, power pressed from M.S. sheets and galvanized with zinc coating of 120 gms/sqm (both side inclusive) as per IS : 277 and consisting of angle cleats of size 25 mm wide x 1.6 mm thick with flanges of 27 mm and 37mm, at 1200 mm centre to centre, one flange fixed to the ceiling with dash fastener 12.5 mm dia x 50mm long with 6mm dia bolts, other flange of cleat fixed to the
angle hangers of 25x10x0.50 mm of required length with nuts & bolts of required size and other end of angle hanger fixed with intermediate G.I. channels 45x15x0.9 mm running at the spacing of 1200 mm centre to centre, to which the ceiling section 0.5 mm thick bottom wedge of 80 mm with tapered flanges of 26 mm each having lips of 10.5 mm, at 450 mm centre to centre, shall be fixed in a direction perpendicular to G.I. intermediate channel with connecting clips made out of 2.64 mm dia x 230 mm long G.I. wire at every junction, including fixing perimeter channels 0.5 mm thick 27 mm high having flanges of 20 mm and 30 mm long, the perimeter of ceiling fixed to wall/partition with the help of rawl plugs at 450 mm centre, with 25mm long dry wall screws @ 230 mm interval, including fixing of gypsum board to ceiling section and perimeter channel with the help of dry wall screws of size 3.5 x 25 mm at 230 mm c/c, including jointing and finishing to a flush finish of tapered and square edges of the board with recommended jointing compound of joint and two coats of primer su,i tjoabinletinfogr tbapoaersd ,, all as per manufacturer's specification and also including the cost of making openings for light fittings, grills,
diffusers, cutouts made with frame of perimeter channels suitably fixed, all complete as per drawings, specification and direction of the Engineer in Charge but excluding the cost of painting with : 12.5 mm thick tapered edge gypsum board conforming to IS: 2095- Part I.
160
1024
163888
Providing and fixing precast chequered cement concrete tiles 22 mm thick, laid in footpath & courtyard, on 20 mm thick bed of cement mortar 1 : 4 ( 1 cement : 4 fine sand ) jointed with neat cement slurry mixed with pigment to match the shade of tiles including rubbing and polishing complete.
1. In dark shade using ordinary cement
1
834
834
Providing and fixing 1st class quality ceramic glazed wall tiles conforming to IS : 15622 - 2017 (thickness to be specified by the manufacturer) of approved make in all colours, shades of any size as approved by Engineer-incharge
in skirting, risers of steps and dados, laid over 12mm thick bed of cement mortar 1 : 3 (1 cement : 3 fine
sand) jointed with ordinary cement slurry including pointing with white cement mixed with pigment of matching shade etc. all complete as per direction of the Engineer in-charge.
i) 450 mm X 300 mm in all shades and design
37.8
927
35074.62
ii) 600 mm X 300 mm in all shades and design
25.2
1110
27979.56
iii) 600 mm X 250 mm in all shades and design
30.24
1077
32574.53
Providing and laying 1st class quality ceramic floor tiles in different sizes (thickness to be specified by the manufacturer) of 1st quality conforming to IS : 15622 -2017 of approved make in colours such as White, Ivory, Grey, Fume Red Brown, laid over 20 mm thick cement mortar 1:4 (1 cement : 4 fine sand), Jointing with grey cement slurry @ 3.3 kg/sqm including pointing the joints with white cement and matching pigment etc. all complete as per direction of the Engineer in-charge.
i) Mat Finish Tiles/ Anti-skid Tiles/ Glossy Tiles
a) 600 mm x 600 mm in all shades and designs 1st class quality ceramic floor Porcelain tiles
15.2
1177
17891.92
Providing and laying vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS: 15622 - 2017, of approved make, in all colours and shades, laid over 20mm thick cement mortar 1:4 (1 cement : 4 fine sand), jointing with grey cement slurry @ 3.3 kg/ sqm including grouting the joints with white cement and matching pigments etc., complete.
i) Double charged Stainfree vitrified tiles (Glossy)
a)Size of tile 600 mm x 600 mm
111.42
1169
130339.12
ii) Glazed Vitrified Tiles - Full Body (Glossy / Mat Finish/Anti-Skid)
a) Size of tile 600 mm x 600 mm
117.52
1387
163070.75
Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade [Payment shall be made after submission of Test Certificate issued by the Manufacturer]: i) Two or more coats on new work over an under coat of suitable shade with ordinary paint (primer) of approved brand and manufacture.
25.5
154
3937.2
Removing dry or oil bound distemper, water proofing cement paint and the like by scrapping, sand papering and preparing the surface smooth including necessary repairs to scratches etc. complete.
25.5
17
443.7
Providing and applying plaster of paris putty of 2 mm thickness over plastered surface to prepare the surface even and smooth complete.
644.43
156
100788.85
Distempering with 1st quality acrylic distemper (ready mixed) having VOC content less than 50 grams/ litre, of approved brand and manufacture to give an even shade
[Payment shall be made after submission of Test Certificate issued by the Manufacturer] :
New work ( two or more coats) over and including water thinnable priming coat with cement primer.
267.95
120
32368.36
Distempering with 1st quality washable acrylic distemper of approved brand and manufacture and of required shade on old work ( one or more coats ), to give an even shade as required complete as per
direction of the Engineer in charge.
252
46
11642.4
Finishing walls with Superior quality exterior paint of required shade of approved brand and manufacture for VIP quarters.
New work ( two or more coats applied @ 1.67 litre/10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/10 sqm)
89.25
218
19466.32
Providing and fixing water closet squatting pan (Indian type W.C. pan ) with 100mm sand cast Iron P or S trap, 10 litre low level white P.V.C. flushing cistern with manually controlled device (handle lever) conforming to IS : 7231, with all fittings and fixtures complete including cutting and making good the walls and floors wherever required :
i) White Vitreous china Orrisa pattern W.C. pan of size 580x440 mm with integral type foot rests.
2
5680
11360.2
Providing and fixing white vitreous china pedestal type water closet (European type W.C. pan) with seat and lid, 10 litre low level white P.V.C. flushing cistern with manually controlled device (handle lever), conforming to IS : 7231, with all fittings and fixtures complete including cutting and making good the walls and floors wherever required :
i) W.C. pan with ISI marked white solid plastic seat and lid.
2
5373
10747.6
Providing and fixing P.V.C. low level flushing cistern with manually controlled device (handle lever) conforming to IS : 7231, with all fittings and fixtures complete.
i) 10 litre capacity-White
4
1145
4581.2
Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass pillar taps,32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever require :
i) White Vitreous China Wash basin size 630x450 mm with a pair of 15 mm C.P. brass pillar taps
2
4077
8154.4
Providing and fixing white vitreous china pedestal for wash basin completely recessed at the back for the reception of pipes and fittings.
3
1834
5502
Providing and fixing PTMT towel rail complete with brackets fixed to wooden cleats with CP brass screws with concealed fitting arrangement of approved quality and colour.
i) 600mm long towel rail with total length of 645mm, width 78mm and effective height of 88mm, weighing not less than 190gms.
3
521
1563.9
Providing and fixing toilet paper holder :
i) C.P. brass
3
636
1909.5
Providing and fixing P.V.C. waste pipe for sink or wash basin including P.V.C. waste fittings complete. Flexible pipe
i) 40 mm dia
25
126
3150
Providing and fixing 600x450 mm bevelled edge mirror of superior glass (of approved quality) complete with 6 mm thick hard board ground fixed to wooden cleats with C.P. brass screws and washers complete.
3
1042
3126
Providing and fixing 600x120x5mm glass shelf with edges round of supported on anodised aluminium angle frame with C.P. brass brackets and guard rail complete fixed with 40 mm long screws, rawl plugs etc., complete.
3
850
2550.9
Providing and fixing ball valve (brass) of approved quality High or low pressure, with plastic floats complete :
i) 15 mm nominal bore
5
365
1828
ii) 20 mm nominal bore
5
408
2042.5
iii) 25 mm nominal bore
5
390
1953.5
Providing and fixing C.P. brass bib cock of approved quality conforming to IS:8931
i) 15 mm nominal bore
2
518
1036
Providing and fixing C.P. Brass extension nipple (size 15mmx50mm) of approved make and quality as per direction of Engineer-in-charge.
6
66
399.6
Providing and placing on terrace (at all floor levels) polyethylene water storage tank ISI : 12701 marked with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank.
1000
12
12100
Labour charges for washing GI pipe internal for removing iron deposited iron etc. in/c replacement of the pipe from original position as per direction of the Engineer-in-charge
240
49
11964
Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of
pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer in Charge.
Internal work - Exposed on wall
i) 15 mm nominal outer dia .Pipes.
300
245
73770
ii) 20 mm nominal outer dia .Pipes.
25
333
8327.5
iii) 25 mm nominal outer dia .Pipes.
30
442
13266
iv) 40 mm nominal outer dia .Pipes.
35
737
25819.5
Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings This includes jointing of pipes & fittings with one step CPVC solvent cement, trenching ,refilling & testing of joints complete as per direction of Engineer in Charge. External work i) 15 mm nominal outer dia .Pipes.
35
213
7469
ii) 20 mm nominal outer dia .Pipes.
50
284
14240
iii) 25 mm nominal outer dia .Pipes.
25
400
10000
iv) 32 mm nominal outer dia .Pipes.
25
479
11995
Providing and fixing G.I. Union in G.I. pipe including cutting and threading the pipe and making long
screws etc. complete as per CPWD specification and direction of the Engineer - in - charge.(New work)
i) 15 mm nominal bore
25
214
5360
(ii) 20 mm nominal bore
25
232
5800
(iii) 25 mm nominal bore
25
300
7522.5
Providing and fixing brass stop cock of approved
quality :
i) 20 mm nominal bore
2
429
858.4
Providing and fixing PTMT soap Dish Holder having length of 138mm, breadth 102mm, height of 75mm with concealed fitting arrangements weighing not less than 106 gms.
2
99
198.4
Providing and fixing uplasticised PVC connection pipe with brass unions :
i) 45 cm length
a) 20 mm nominal bore
3
112
338.4
Providing and fixing on wall face unplasticised Rigid PVC rain water pipes (working pressure 4 kg/cm2) conforming to IS : 13592 Type A including jointing with seal ring conforming to IS : 5382 leaving 10 mm gap for thermal expansion:
i) Single socketed pipe - 75 mm OD
5
197
985
(ii) Single socketed pipe - 110 mm OD
27
314
8494.2
Providing and fixing unplasticised -PVC pipe clips of approved design to unplasticised - PVC rain water pipes by means of 50x50x50mm hard wood plugs, screwed with M.S. screws of required length including cutting brick work and fixing with cement mortar 1 : 4 (1cement : 4 fine sand) making good the wall etc. complete.
(a) 75mm
3
243
730.5
(b) 110 mm
17
242
4114
Providing and fixing on wall face unplasticised - PVC moulded fittings/ accessories for unplasticised Rigid PVC rain water, soil, waste & vent pipes pipes
conforming to IS : 13592 Type A including jointing with seal ring conforming to IS : 5382 leaving 10 mm gap for thermal expansion:
(A)Coupler
(i) 75mm
7
81
567.7
(ii) 110 mm
7
135
947.8
(B) Single equal tee with door
(i) 75x75x75 mm
7
168
1182.3
(ii) 110x110x110 mm
7
240
1684.9
(C) Bend 87.5°
(i) 75mm
7
101
707.7
(ii) 110 mm
7
151
1061.9
Labour charge for cleaning inspection chamber with night soil & refusal water as per direction of Engineer-in-Charge.
1
500
500
Renewing glass panes with putty and nails wherever necessary, including racking out the old putty:
1. Float Glass panes of 4 mm .
32.77
1017
33340.2
Providing and fixing fly proof galvanised M.S. wire gauge to windows and clerestory windows using galvanised M.S. wire gauge with average width of aperture 1.4 mm in both directions with wire of dia. 0.63 mm.
i) With Gamair wood beading 62 × 19 mm.
32.77
1026
33651.51
Steel work in built up tubular (round, square or rectangular hollow tubes etc.) trusses etc., including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete.
i) Hot finished welded type tubes
5500
146
804100
Steel work welded in built up section/framed work including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using steel etc. complete as required:-
i) (i)In grating, frames, guard bar, railing, brackets, gates and similar works, all complete.
400
142
56920
Providing and fixing 1mm thick M.S. sheet door with frame of 40x40x6mm angle iron and 3mm M.S. gusset
plates at the junctions and corners, & with cleats with bolts & nuts, rivets, locking arrangement, handles, hooks & eyes, pinlets including embedding in cement concrete of required grade for fixing in position, all necessary fittings, including applying a priming coat of approved steel primer etc. complete as required:-
i) Using M.S. angels 40x40x6 mm for diagonal braces.
2.73
4711
12862.94
Cleaning of rubbish, sludge, broken glas, bottle grass etc. and other necessary things collected from the drain as per direction of Eng-in-charge.
90
31
2841.3
Shifting of existing office almirahs (in/c packed official documents, files etc) or other official materials from one place to another place for mtc. Of a room & placing the same in the same position after mtc. Properly without any demage as per direction of the Engineer-in-charge.
25
207
5182.25
Providing and fixing PVC Bib cock of best quality
15 mm nominal bore
3
115
345.45
Providing & fixing 2-in-1 CP pillar cock (fome) of JAQUAR/PARRYWARE/ROYAL/HINDWARE as selected & approved at VVIP qtr as per direction of the Engineer-In-Charge.
2
896
1792
Providing & fixing 2-in-1 CP bib cock of JAQUAR/PARRYWARE/ROYAL/HINDWARE as selected & approved at VVIP qtr as per direction of the Engineer-In-Charge.
1
1640
1640
Providing & fixing white vitreous china european type low level WC pan of JAQUAR/PARRYWARE/HINDWARE with seat & lid in/c white vitreous china flushing cistern (as selected & approved) with manually controlled device with all fittings & fixtures complete in/c cutting & making good the walls & floors wherever required as per direction of the Eng-In-Charge.
1
32152
32152.86
Providing & fixing white vitreous china wash basin of HINDWARE/PARRYWARE/JAQUAR (as selected & approved) with long pedestal,C.I.brackets,32mm CP brass waste of standard pattern in/c painting of fittings & brackets, cutting &making good the walls & floors wherever required as per direction of the Eng-In-Charge.
White Vitreous China wash basin size.
1
7319
7319.32
Providing & fixing Cardiff health foucet of JAQUAR/PARRYWARE/ROYAL/HINDWARE as selected & approved with connecting hose as per direction of the Eng-In-Charge.
3
1026
3079.74
Providing and fixing GODREJ SILVER STEEL hydraulic door closer with double speed adjustment with necessary accessories and screws etc. complete.as selected & approved as per direction of the E-In-C
10
2100
21008.3
Repairing of 2 HP capacity 1 1/2" x 1 1/2 swatting & delivery BE water pump in/c. dismantling cleaning replace ball bearing key gland nut shaft impellor welding leath cutting & assembling with laying asbestos roof and fitting leveling with motor etc. complete.
1
1650
1650
Providing & fixing false ceiling with SPUF142-D-01 (different design 10mm thick 150mm width & necessary length) of approved colour concealed type carrier T section (DWUF:406:40*63.5mm) & L section (DWUF:405:40*48) with necessary screw, holdfast PVC beading & MS black pipe structure 48mm dia at 1200mm centre to centre in/c cutting holes & making good the walls complete as per direction of the Eng-In-Charge.
39.09
1941
75873.69
Providing and fixing superior quality Soap dish holder of approved design and colour. .(Jaquar make- code-AKP-35731P).
2
1229
2458
Providing and fixing superior quality towel rail complete with brackets fixed to wooden cleats with C.P. brass screws with all fittings complete as per direction of the Engineer-in-charge.
A. Towel rail 600 mm long .(Jaquar make- code-AKP-35711PS).
3
2810
8430
Providing and fixing superior quality angular stop cock of approved brand with wall flange. (Jaquar make- code-FON-40053)
2
1213
2426
Providing and fixing superior quality Bib cock of approved brand with wall flange. (Jaquar make- code-FON-40037)
3
1741
5223
Providing and fixing superior quality glass shelf 600 mm long complete with brackets fixed to wooden cleats with C.P. brass screws with all fittings complete as per direction of the Engineer-in-charge.
A. Glass shelf 600 mm long .(Jaquar make- code-AKP-35771P).
3
1815
5445
Evaluation Notes How It Works ?
Potential Partner
Select Your Requirements
Past BiddersThis list is curated from the bidders of the similar tenders in the past
- Bidder NameThis Information is for unsubscribed user This Information is for unsubscribed user
- Awarded Ratexx%
- Bidder NameThis Information is for unsubscribed user This Information is for unsubscribed user
- Awarded Ratexx%
- Bidder NameThis Information is for unsubscribed user This Information is for unsubscribed user
- Awarded Ratexx%