Roads And Buildings Department Tender

Providing Road Safety Interventions;Providing & Fixing Junction boards of 1500x1200mm Rectaangular (Type XI) Providing and fixing junction boards of size 1500x1200mm made out of Type-XI of ASTMD 4956-09 wide angle cube cornered micro Prismatic Retro Retro reflective sheeting prismatic Retro reflective sheeting and conforming to IRC 67:2012 for full background of Green colour and white letters and fixed over 4MM alluminium composite material sheet having minimum 0.5mm thick alumium skin on both sides with back side painted grey colour and fixed over back support frame of M.S. angle 25x25x3mm all round and fixing with 35x35x4mm and mounted on a MS angle post of size 75x75x6mm with clear height of not less than 2.1m from the ground level to the bottom of the board. The signpost should be painted with one coat of red oxide paint and 2 coats of synthetic enamel paint Black and white colour with bands of 30cm of height. The signpost shall be firmly fixed with MS base angle 35x36x4mm in to the ground by M-15 concrete foundation of size 450x450x600mm including cost and conveyance of all materials, equipments, machinery and labour with all leads and lift, loading charges necessary for satisfactory completion of the work as directed by Engineer-in-Charge.

Providing Road Safety Interventions;Supply and installation of Hazard Markers/Delinators using M.S. angle of size 55x55x6mm and 120cm high above ground level painted with two coats of black and white stripes of 15cm wide with first quality synthetic enamel paint over one coat of appropriate primer of approved brand, colour, with 30cmx90cm Type-XI of ASTMD 4956-09 wide angle cube cornered micro prismatic Retro reflective sheeting of Yellow colour and confirming to IRC 67:2012 fixed over 3MM alluminium composite material having minimum 0.30mm thick aluminium skin on both sides with standard supports consisting of alternately black and Yellow with black stripes in screen printing sloping downward at an angle of 45 degrees topwards the side of the obstruction on which the traffic is to pass and buried in to the ground in a trench of size 30cmx30cm and 50cm depth filled with CC M-20 including cost and conveyance of all materials, equipment, machinery and labour with all leads and lfts, loading and un loading charges necessary for successful completion of the work on any road in division as directed by Engineer-in-Charge and conforming to IRC 67-2012 & MoRT&H SpecificationNo.805 and approved drawings etc., complete for finished item of work.

Providing Road Safety Interventions;Providing and fixing Cautionary/Warning sign boards size 900 mm equilateral triangle made out of Type-XI of ASTMD 4956-09 wide angle cube cornered micro prismatic retro reflective sheeting and confirming to IRC 67:2012 for full background of White colour and letters/logos done by screen printing in Black colour, boarders by screen printing in Red colour and fixed over 4MM aluminium composite material sheet having minimum 0.50mm thick aluminium skin on both sides with back side painted grey colour and fixed over back support frame of M.S angle 25x25x3mm all round and fixing with 35x35x4mm and mounted on a MS angle post of size 75x75x6mm with clear height of not less than 2.1m from the ground level to the bottomn of the board. The signpost should be painted with one coat of red oxide paint and 2 coats of synthetic enamel paint Black and white colour with bands of 30cm of height. The signpost shall be firmly fixed with MS base angle 35x35x4mm in to the ground by M-15 concrete foundation of size 450x450x600mm including cost and conveyane of all materials, equipment, machinery and labour with all leads and lift, loading charges necessary for satisfactory completion of the work as directed by Engineer-in-Charge.