Panchayat Raj Engineering Department Tender

CH Kannala;Flooring with Polished Shabad/Tandur blue Slabas 15 to 18 mm thick (0.457M x 0.457M) set over a base coat of CM (1:8), 12mm thick using Manufactured Sand (Rock sand) and natural river sand (screened sand) in the ratio of 50:50 (joints of stone must be flushed) over C.C. bed already laid or R.C.C. roof slab only after it is properly cured, cleaned, moistered and where necessary treated with neat grey cement slurry of honey like consistency spred at3.3 kgs of cement for 1 sqm. and jointed with neat cement paste to full depth, including cost and conveyance of all materials like cement, sand, water, flooring stones etc. to site, sales and other taxes on all materials, all operational, incidental and labour charges such as dressing of flooring stones to the required sizes, mixing of cement mortar, laying, jointing, curing, lift charges etc., complete but excluding seigniorage charges for finished item of work.(APSS No.703 & 701)

CH Kannala;Plastering 12mm thick in two coats with base coat of 8mm thick in CM (1:5) and top coat of 4mm thick in CM (1:3) with dubara sponge finishing including cost and conveyance of all materials like cement, sand, water etc., to site, including seigniorage charges, sales & other taxes on all materials, and all operational, incidental charges on materials and including cost of all labour charges for mixing mortar, finishing, scaffolding, lift charges, curing, including cutting grooves as directed by Engineer - in - charge etc for finished item of work. (SS 901,903 & 904)

CH Kannala;Plastering with CM 2 coats, 20 mm thick, base coat in CM (1:6), 16mm thick and top coat in CM (1:4), 4mm thick with Dubara sponze finishing including cost and conveyance of all materials like cement, sand, water etc., to site, including seigniorage charges, sales & other taxes on all materials, and all operational, incidental charges on materials and including cost of all labour charges for mixing mortar, finishing, scaffolding, lift charges, curing, including cutting grooves as directed by Engineer-in-charge etc., for finished item of work .(SS 901,903 & 904)

CH Kannala;Masonry work in CM (1:8) prop with Flyash Cement solid blocks of size 290 x 225 x 140 mm for manufacturing of flyash solid blocks using flyash of 80 kgs, cement of 15 kgs. Gypsum of 5 kgs. and stone dust including cost and conveyance of all materials, labour charges, seiniorage charges, scaffolding and curing etc., cpomplete with a compresive strength not lessthan 50 kg/sqm for walls for Superstructure Walls.

CH Kannala;Providing impervious coat to exposed RCC roof slab surface with CM(1:3), 20mm thick with 1kg of water proof compound per bag of cement laid over roof when it is green including cost of all materials, seigniorage charges, excluding conveyance charges of materials and including all operational, incidental and labour charges for mixing mortar, laying, rendering smooth and thread lining, curing, rounding off junctions of wall and slab etc,, complete for finished item of work

CH Kannala;Reinforced cement concrete corresponding M20 Grade as per IS 456 equivalent to (1:1.5:3) mix prop. Nominal mix using 20mm size HBG Metal machine crushed metal from approved quarry including cost and conveyance of all materials like cement, fine aggregate ( Sand ) , coarse aggregate, water etc., to site including seignirage charges, VAT on all materials, all operational charges, incidental, and labour charges such as centering, shuttring, scaffolding, lift charges, machine mixing, laying concrete, vibrating, curing concrete etc., complete but excluding cost of steel and its fabrication charges for finished item of work ( APSS No. 402 & 403)-For Roof Slab of 125 thick

CH Kannala;Reinforced cement concrete corresponding M20 Grade as per IS 456 equivalent to (1:1.5:3) mix prop. Nominal mix using 20mm size HBG Metal machine crushed metal from approved quarry including cost and conveyance of all materials like cement, fine aggregate ( Sand ) , coarse aggregate, water etc., to site including seignirage charges, VAT on all materials, all operational charges, incidental, and labour charges such as centering, shuttring, scaffolding, lift charges, machine mixing, laying concrete, vibrating, curing concrete etc., complete but excluding cost of steel and its fabrication charges for finished item of work ( APSS No. 402 & 403)-For Roof Beam

CH Kannala;Reinforced cement concrete corresponding M20 Grade as per IS 456 equivalent to (1:1.5:3) mix prop. Nominal mix using 20mm size HBG Metal machine crushed metal from approved quarry including cost and conveyance of all materials like cement, fine aggregate ( Sand ) , coarse aggregate, water etc., to site including seignirage charges, VAT on all materials, all operational charges, incidental, and labour charges such as centering, shuttring, scaffolding, lift charges, machine mixing, laying concrete, vibrating, curing concrete etc., complete but excluding cost of steel and its fabrication charges for finished item of work ( APSS No. 402 & 403)-For Sunshades

CH Kannala;Reinforced cement concrete corresponding M20 Grade as per IS 456 equivalent to (1:1.5:3) mix prop. Nominal mix using 20mm size HBG Metal machine crushed metal from approved quarry including cost and conveyance of all materials like cement, fine aggregate ( Sand ) , coarse aggregate, water etc., to site including seignirage charges, VAT on all materials, all operational charges, incidental, and labour charges such as centering, shuttring, scaffolding, lift charges, machine mixing, laying concrete, vibrating, curing concrete etc., complete but excluding cost of steel and its fabrication charges for finished item of work ( APSS No. 402 & 403)-For Lintels

CH Kannala;Reinforced cement concrete corresponding M20 Grade as per IS 456 equivalent to (1:1.5:3) mix prop. Nominal mix using 20mm size HBG Metal machine crushed metal from approved quarry including cost and conveyance of all materials like cement, fine aggregate ( Sand ) , coarse aggregate, water etc., to site including seignirage charges, VAT on all materials, all operational charges, incidental, and labour charges such as centering, shuttring, scaffolding, lift charges, machine mixing, laying concrete, vibrating, curing concrete etc., complete but excluding cost of steel and its fabrication charges for finished item of work ( APSS No. 402 & 403)-For Plinth Beam

CH Kannala;Reinforced cement concrete corresponding M20 Grade as per IS 456 equivalent to (1:1.5:3) mix prop. Nominal mix using 20mm size HBG Metal machine crushed metal from approved quarry including cost and conveyance of all materials like cement, fine aggregate ( Sand ) , coarse aggregate, water etc., to site including seignirage charges, VAT on all materials, all operational charges, incidental, and labour charges such as centering, shuttring, scaffolding, lift charges, machine mixing, laying concrete, vibrating, curing concrete etc., complete but excluding cost of steel and its fabrication charges for finished item of work ( APSS No. 402 & 403)-For Columns

CH Kannala;Reinforced cement concrete corresponding M20 Grade as per IS 456 equivalent to (1:1.5:3) mix prop. Nominal mix using 20mm size HBG Metal machine crushed metal from approved quarry including cost and conveyance of all materials like cement, fine aggregate ( Sand ) , coarse aggregate, water etc., to site including seignirage charges, VAT on all materials, all operational charges, incidental, and labour charges such as centering, shuttring, scaffolding, lift charges, machine mixing, laying concrete, vibrating, curing concrete etc., complete but excluding cost of steel and its fabrication charges for finished item of work ( APSS No. 402 & 403)-For Pedastal

CH Kannala;Reinforced cement concrete corresponding M20 Grade as per IS 456 equivalent to (1:1.5:3) mix prop. Nominal mix using 20mm size HBG Metal machine crushed metal from approved quarry including cost and conveyance of all materials like cement, fine aggregate ( Sand ) , coarse aggregate, water etc., to site including seignirage charges, VAT on all materials, all operational charges, incidental, and labour charges such as centering, shuttring, scaffolding, lift charges, machine mixing, laying concrete, vibrating, curing concrete etc., complete but excluding cost of steel and its fabrication charges for finished item of work ( APSS No. 402 & 403)-For Footings

CH Kannala;CR stone masonry, in CM (1:6) prop: (Cement: Sand) using hard granite stones 2nd sort from approved quarry including cost and conveyance of all materials like Granite stones, cement, sand, water, etc., to site including seigniorage charges, sales & other taxes on all materials, all operational, incidental, and labour charges such as cutting stones to required size and shape, mixing of cement mortar, constructing masonry, curing etc., complete for finished item of work for foundation basement (APSS No. 601 )

CH Kannala;Random Rubble stone masonry, in CM (1:6) prop: (Cement: Sand) using hard granite stones from approved quarry including cost and conveyance of all materials like Granite stones, cement, sand, water, etc., to site including seigniorage charges, sales & other taxes on all materials, all operational, incidental, and labour charges such as cutting stones to required size and shape, mixing of cement mortar, constructing masonry, curing etc., complete for finished item of work for foundation and basement (APSS No. 601 )

CH Kannala;Filling with carted gravel in trenches, sides of foundations and basement with initial lead in layers not exceeding 15cm thick,watering and ramming including cost and conveyance of water to work site and all peraitonal,incidental,loabour charges,hire charges of T&P etc., complete for fnished item of work(APSS NO.309&310) ( BLD-CSTN-2-8)

CH Kannala;Plain Cement Concrete (1:5:10) (cement: fine aggregate: Coarse aggregate) for foundations and under flooring bed using coarse aggregate 40mm size hard , machine crushed granite from approved quarry including cost and conveyance of all materials like cement, sand, coarse aggregate, water etc. to site, including seigniorage charges, sales & other taxes on all materials and including all charges for machine mixing, laying concrete in foundations and under flooring bed, ramming in 15 cm layers finishing top surface to the required level curing etc.,and Overheads & Contractors profit complete for finished item of work. (APSS No. 402)

CH Kannala;Earth work excavation for foundations and depositing on bank for all lifts and with an initial lead of 10m including all operational, incidental, labour charges such as shoring ,sheeting, planking, strutting, etc. complete for finished item of work including seigniorage excluding dewatering charges etc as per SS - 20 B (APSS 308).