Panchayat Raj Engineering Department Tender

Building;Supply and fixing of Country wood Door Single shutter fully panelled door of size 1.20 X 2.10 mt with frame made of well seasoned country Wood scantlings of size 100 x 75mm and shutter made of side rails 100mm X 32mm, top rail 100 mmX32 mm, bottom rail 100mmX 32 mm and intermediate rails of 100mm x 32 mm and planks s - 5 no's of 25mm thick as per approved design with fixtures of 6 nos of 9" ' z" holdfasts, 300 mm long MS Iron coted aldrop-1 no, 125mm long MS iron butt hinges 6 No's, Door stoppers-2 no, 150mm long MS coated Tower bolts 3- no's MS iron coated fancy handles 150 mm -2nos with necessary screws complete including cost and conveyance of all materials and labour charges etc. complete as per specifications (APSS NO.1001 & 1002)

Building;VRCC M20 Design mix : Supply and placing of the VRCC M20 Design mix Concrete for Columns, Lintels, Water tanks, RCC Walls in buildings corresponding to Table 9 of IS 456 using Concrete Mixer with 20mm size graded machine crushed HG metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site including cost and conveyance of all materials, including all operational, incidental and labour charges such as , machine mixing, laying concrete, curing, including contractor profit and over head charges etc.,complete but excluding cost of steel and its fabrication charges for finished item of work with minimum cement content as per IS code from standard suppliers approved by the department including pumping, centering, shuttering, laying concrete, vibrating, curing etc. complete but excluding GST and seignorage charges for finished item of work - each floor height upto 3.66 mts ie., 12 feet - centering & scaffolding for Unsupported Height up to 3.66 M (i.e, 12 feet of floor height) - Steel scaffolding pipes, jack Props, Wallers, Foot plates, brackets, steel Centering Plates, etc.i) for Lintels VRCC M20 - Design mix GF

Building;Brick Masonry in CM (1:8) with Bricks with traditional size 23 x 11 x 7 cms 2nd class Brick Masonry in superstructure with CM (1:8) prop: using second class bricks from approved source having minimum crushing strength of 40 Kg/Sqcm. including cost and conveyance of all materials like cement, sand, bricks, water etc., to site, including sales & other taxes on all materials, all operational, incidental and labour charges such as mixing cement mortar, constructing masonry, scaffolding charges, lift charges, curing, etc., complete but excluding seigniorage charges for finished item of work. (APSS No. 501 & 504). HIRE CHARGES FOR ACCESS SCAFFOLDING - up to 3.66 M using Casuarinas Ballies,Bamboos, Wooden Reapers, Runners, Wood Posts, Wall Plates etc., for BRICK MASONRY/ STONE MASONRY - 1 sqm (Wall Area)

Building;Providing impervious coat to exposed RCC roof slab surface with CM(1:3), 20mm thick with 1kg of water proof compound per bag of cement laid over roof when it is green including cost of all materials, seigniorage charges, excluding conveyance charges of materials and including all operational, incidental and labour charges for mixing mortar, laying, rendering smooth and thread lining, curing, rounding off junctions of wall and slab etc,, complete for finished item of work

Building;VRCC M20 Design mix : Supply and placing of the VRCC M20 Design mix Concrete for RCC SLABS, BEAMS, sunshades corresponding to Table 9 of IS 456 using Concrete Mixer with 20mm size graded machine crushed HG metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site including cost and conveyance of all materials, including all operational, incidental and labour charges such as , machine mixing, laying concrete, curing, including contractor profit and over head charges etc.,complete but excluding cost of steel and its fabrication charges for finished item of work with minimum cement content as per IS code from standard suppliers approved by the department including pumping, centering, shuttering, laying concrete, vibrating, curing etc. complete but excluding GST and seignorage charges for finished item of work each floor height upto 3.66 mts ie., 12 feet - centering & scaffolding for Unsupported Height up to 3.66 M (i.e, 12 feet of floor height) - Steel scaffolding pipes, jack Props, Wallers, Foot plates, brackets, steel Centering Plates, etc.,ii) for Slab 125 mm thick VRCC M20 - Design mix FF

Building;VRCC M20 Design mix : Supply and placing of the VRCC M20 Design mix Concrete for RCC SLABS, BEAMS, sunshades corresponding to Table 9 of IS 456 using Concrete Mixer with 20mm size graded machine crushed HG metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site including cost and conveyance of all materials, including all operational, incidental and labour charges such as , machine mixing, laying concrete, curing, including contractor profit and over head charges etc.,complete but excluding cost of steel and its fabrication charges for finished item of work with minimum cement content as per IS code from standard suppliers approved by the department including pumping, centering, shuttering, laying concrete, vibrating, curing etc. complete but excluding GST and seignorage charges for finished item of work each floor height upto 3.66 mts ie., 12 feet - centering & scaffolding for Unsupported Height up to 3.66 M (i.e, 12 feet of floor height) - Steel scaffolding pipes, jack Props, Wallers, Foot plates, brackets, steel Centering Plates, etc.,i) for Roof Beams VRCC M20 - Design mix GF @ 3.60 LVL

Building;VRCC M20 Design mix : Supply and placing of the VRCC M20 Design mix Concrete for Foundation - Footings, pedestals, plinth beams corresponding to Table 9 of IS 456 using Concrete Mixer with 20mm size graded machine crushed HG metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site including cost and conveyance of all materials, including all operational, incidental and labour charges such as , machine mixing, laying concrete, curing, including contractor profit and over head charges etc.,complete but excluding cost of steel and its fabrication charges for finished item of work with minimum cement content as per IS code from standard suppliers approved by the department including pumping, centering, shuttering, laying concrete, vibrating, curing etc. complete but excluding GST and seignorage charges for finished item of workc) for plinth beams VRCC M20 - Design mix

Building;Gravel Filling in trenches, sides of foundations and basement with initial lead in layers not exceeding 15 cm thick, consolidating each deposited layer by watering and ramming including cost and conveyance of water to work site and all operational, incidental, labour charges, hire charges of T & P etc., complete for finished item of work. (APSS NO. 309 & 310) & Amendment of SoR 2021-22 PROC.NO.ENC(B)/DEE-II/AEE-10/Bldgs/SoR-2021-22 DT:31.05.2021

Building;Random Rubble stone masonry, in CM (1:8) prop: (Cement: Sand) using Hard blasted Granite stones from approved quarry including cost and conveyance of all materials like Granite stones, cement, sand, water, etc., to site sales & other taxes on all materials, all operational, incidental, and labour charges such as cutting stones to required size and shape, mixing of cement mortar, constructing masonry, curing etc., complete but excluding seigniorage charges for finished item of work for foundation and basement (APSS No. 601 & 615)

Building;VRCC M20 Design mix : Supply and placing of the VRCC M20 Design mix Concrete for Columns, Lintels, Water tanks, RCC Walls in buildings corresponding to Table 9 of IS 456 using Concrete Mixer with 20mm size graded machine crushed HG metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site including cost and conveyance of all materials, including all operational, incidental and labour charges such as , machine mixing, laying concrete, curing, including contractor profit and over head charges etc.,complete but excluding cost of steel and its fabrication charges for finished item of work with minimum cement content as per IS code from standard suppliers approved by the department including pumping, centering, shuttering, laying concrete, vibrating, curing etc. complete but excluding GST and seignorage charges for finished item of work - each floor height upto 3.66 mts ie., 12 feet - centering & scaffolding for Unsupported Height up to 3.66 M (i.e, 12 feet of floor height) - Steel scaffolding pipes, jack Props, Wallers, Foot plates, brackets, steel Centering Plates, etc.i) for columns VRCC M20 - Design mix GF

Building;VRCC M20 Design mix : Supply and placing of the VRCC M20 Design mix Concrete for Foundation - Footings, pedestals, plinth beams corresponding to Table 9 of IS 456 using Concrete Mixer with 20mm size graded machine crushed HG metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site including cost and conveyance of all materials, including all operational, incidental and labour charges such as , machine mixing, laying concrete, curing, including contractor profit and over head charges etc.,complete but excluding cost of steel and its fabrication charges for finished item of work with minimum cement content as per IS code from standard suppliers approved by the department including pumping, centering, shuttering, laying concrete, vibrating, curing etc. complete but excluding GST and seignorage charges for finished item of workb) for pedestals VRCC M20 - Design mix

Building;VRCC M20 Design mix : Supply and placing of the VRCC M20 Design mix Concrete for Foundation - Footings, pedestals, plinth beams corresponding to Table 9 of IS 456 using Concrete Mixer with 20mm size graded machine crushed HG metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site including cost and conveyance of all materials, including all operational, incidental and labour charges such as , machine mixing, laying concrete, curing, including contractor profit and over head charges etc.,complete but excluding cost of steel and its fabrication charges for finished item of work with minimum cement content as per IS code from standard suppliers approved by the department including pumping, centering, shuttering, laying concrete, vibrating, curing etc. complete but excluding GST and seignorage charges for finished item of worka) for column footings VRCC M20 - Design mix

Building;PCC (1:4:8) using 40 mm metal with concrete mixer upto plinth level (cement: (50% Natural sand +50% Robo sand): Coarse aggregate) using 40mm size HBG (SS5) metal from approved quarry including cost and conveyance of all materials like cement, sand, coarse aggregate, water etc. to site, including seigniorage charges, Countryes & other taxes on all materials, all operational, incidental, and labor charges such as mixing, laying and ramming concrete in layers in position not exceeding 15cm, finishing top surface, curing concrete, etc., complete for finished item of work.

Building;Earth work excavation for foundations in Ordinary soils-Manual Means-Upto 3 m depth and depositing on bank for all lifts and with an initial lead of 10m including all operational, incidental, labour charges such as shoring ,sheeting, planking, strutting, etc. complete for finished item of work including seigniorage excluding dewatering charges and GST etc as per SS - 20 B (APSS 308).