Municipal Corporation Tender

Development of Graveyard;Filling with Stone dust in trenches, sides of foundations and basement with initial lead in layers not exceeding 15 cm thick, consolidating each deposited layer by watering and ramming including cost and conveyance of water to work site and all operational, incidental, labour charges, hire charges of T & P etc., complete for finished item of work. (APSS NO.309 & 310)

Development of Graveyard;Providing Plain Cement Concrete (1:4:8) mix using 40mm nominal size HBG crushed stone aggregate and fine aggregate conforming to table 1000-2 of MoRT&H including cost, conveyance of all materials to site and labour charges, centering, machine mixing, laying, Vibrating, curing etc., including all other incidental and operational charges of all T&P etc., complete for finished item of work as per MoRT&H specification 1500, 1700, 2100 (5th Revision) and as directed by the Engineer-in-Charge

Development of Graveyard;Construction of RR Masonary in Cement Mortor ( 1:6 ) Prop using hard granite stone including cost & Conveyance of all materials like Cement, Sand , Water, Granite Stones, including Charges on all Materials, ,labour charges for cutting Stones to required size and shape, mixing of Cement Mortor ,Construction, Scaffolding Charges curing etc., complete for finished item of Work

Development of Graveyard;Plastering with 20mm thick in single coat in CM (1:4) finished smooth including cost and conveyance of all materials to site, charges on all materials, finishing, curing, scaffolding and all operational, incidental, labour charges etc., including cutting grooves where ever necessary etc., complete for finished item of work. (As per SS 903)

Development of Graveyard;Providing High Yield Strength Deformed (HYSD)/ Thermo Mechanically Treated (TMT) Fe 500 grade as per IS 1786-1979) of different diameters for RCC works , including labour charges for straightening, cutting, bending to required sizes and shapes, placing in position with cover blocks of approved materials and size and tying and lap-splicing with binding wire of 18 SWG, forming grills for reinforcement work as per approved designs and drawings, including cost and conveyance of steel bars, including all wastages such as overlaps, couplings, chairs, spacer bars including cost and conveyance of binding wire, cover blocks and all incidental, operational, labour charges such as cutting, bending, placing in position, tying including sales and other taxes on all materials etc., complete for finished item of work in all floors.( APSS No.126)

Development of Graveyard;BLD-CSTN-3-14-(31) - A : S: Supply and placing of the M-20 Design Mix Concrete corresponding to IS 456 using WEIGH BATCHER with 20mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site . sales & other taxes on all materials including all operational, incidental and labour charges such as weigh batching, machine mixing, laying concrete, vibrating, curing, centering and suttering charges etc.,complete but excluding seignorage charges, cost of steel and its fabrication charges for finished item of work (APSS No. 402) with minimum cement content as per IS code for PLINTH, PEDESTALS and FOOTINGS. Note : 1) The cement content is adopted as 280Kg/cum for estimating purpose only.The exact quantities will be as per mix design. 2) As per mix design, if the cement content is found to be less than 280 Kgs/ Cum the defference in cost shall be deducted

Development of Graveyard;Supply and placing of the Ready Mix (RMC) Standard Design Mix Concrete grade as per IS 4926-2003 with minimum cement content as per IS code 456-2000 using 20 mm graded metal, from standard suppliers approved by the department including pumping, laying concrete, vibrating, curing etc. complete but excluding cots of steel and its fabrication charges, centering, shuttering for finished item of work. M20 grade (FOUNDATIONS, PLINTH, PEDESTALS (Below Plinth)

Development of Graveyard;BLD-CSTN-3-15- ( 31 ) -B: Supply and placing of the M-20 Design Mix Concrete corresponding to IS 456 using WEIGH BATCHER with 20mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of alll etc., complete for columns

Development of Graveyard;BLD-CSTN-3-14-(31) - A : S: Supply and placing of the M-20 Design Mix Concrete corresponding to IS 456 using WEIGH BATCHER with 20mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site . sales & other taxes on all materials including all operational, incidental and labour charges such as weigh batching, machine mixing, laying concrete, vibrating, curing, centering and suttering charges etc.,complete but excluding seignorage charges, cost of steel and its fabrication charges for finished item of work (APSS No. 402) with minimum cement content as per IS code for PLINTH, PEDESTALS and FOOTINGS. Note : 1) The cement content is adopted as 280Kg/cum for estimating purpose only.The exact quantities will be as per mix design. 2) As per mix design, if the cement content is found to be less than 280 Kgs/ Cum the defference in cost shall be deducted (A) plinth beams burning plot forms

Development of Graveyard;Roof beams burning plot form

Development of Graveyard;BLD-CSTN-3-16-(31)-C : Supply and placing of the M-20 Design Mix Concrete corresponding to IS 456 using WEIGH BATCHER / MIXER with 20mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all charges etc., complete

Development of Graveyard;Plain Cement concrete M15 (1:2.5:5) using ,20,10 mm metal with concrete mixture

Development of Graveyard;BLD-CSTN-5-17-(55): Brick Masonry work in CM (1:6) prop with Flyash Cement solid blocks of size 290 x 225 x 140 mm for manufacturing of flyash solid blocks using flyash of 80 kgs, cement of 15 kgs. Gypsum of 5 kgs. and stone dust including cost and convey

Development of Graveyard;Supplying, laying, jointing and testing 152.4 mm SWG SP- 1pipes of ISI make conforming to ISI 651 & 4127 with airtight cement joints in CM 1.5:1 prop. including excavation of trenches and socket pits in any soil (except rock requiring blasting) up to 1524 mm(5'0") depth and refilling with watering and tamping. etc. and laying the pipes true to alignment and gradient and testing of joints including cost & conveyance of material and labour charges etc., complete as per special specification and as directed by the Engineer-in-charge for finished item of work (a) 150 mm dia swg pipe

Development of Graveyard;Constructing 914.4 mm x 457.2 mm (3'0"x1'6") brick in CM 1:6 prop. Masonry Inspection chamber up to 914.4 mm (3'0") and fitted with light weight 914.4 mm x 457.2 mm (3'0"x1'6") C.I frame and cover of 40 Kg upto a depth of 914.40mm including excavation in all types of soils laying 100mm thick plain CC (1:5:10) prop. bed making channel in plain CC (1:2:4) prop. 12mm thick plastering in CM (1:4) prop. to inside & outside walls & fitted with light weight 40kgs of 914.40mmx457.20mm CI frame and cover including cost , of all materials , conveyance complete as per special specification and as directed by Engineer-in-charge for finished item of work.

Development of Graveyard;Supplying & fixing CI floor traps 1st quality ISI marked conforming to IS:1729-1979 with C.P. Grating fixing with white cement as per site requirements with standard practice for nominal dia 75 mm (3") and grating size 165 mm dia of weight not less than 5.5 Kgs

Development of Graveyard;Supplying & Fixing Indian make Flat Back Wash HandBasin 1st quality conforming to IS:2556-Part-4:1972 withwaste fittings like rubber plug, chain, 32 mm nominal sizeC.P. Fitting with parallel pipe thread conforming toIS:2963-1979 and fitted with 15 mm nominal boreChromium Plated Pillar Tap of 1st quality Indian make400 grams complete with standard CI brackets includingwooden block: 660 x 460 mm - Single C.P. Pillar cock, including cutting and making grooves in the walls/floors wherever required including cost & conveyance of all materials to work site, all labour charges for all operations etc., complete. as per special specification and as directed by the engineer-in-chief for finished item of work. (a) wash basin

Development of Graveyard;Supplying & Fixing of Orissa Pan white glazed W.C 1st quality ISI marked conforming to IS:2556-Part-3-2004 with "P" or "S" trap 580mm x 440mm including 10 lit. low level porcelain of approved make flushing cistern confirming to IS 7231 with all internal fittings, CI brackets, 31.50mm CP flush pipe, 15mm dia 450mm long PVC connector, 15mm dia CP brass stop cock 300 grams of ISI make, cutting and making grooves the walls and floors wherever required including cost and conveyance, of all material to work site, all labour charges for fixing etc., complete as directed bny Engineer-in- charge for finished item of work.(Neycer/Parryware or Hindustan)

Development of Graveyard;Supply, laying, jointing & testing of the following sizes 3 M double Socket PVC/SWR pipe - 4 Kg/sq.cm - rince/Sudhakar/Kisan/Supreme or any ISI Brand and including cost and conveyance, of all materials , conveyance of all materisls etc., complete as per s.s. for finished item of work. Pipe 75mm dia

Development of Graveyard;rain water pipe 160 mm dia

Development of Graveyard;Supplying and fixing of C.I. Double Socket soil pipes ISI marked conforming to IS:1729-1979 of reputed make with cement caulked joints and fixing as per site requirements including painting black with Japan paint and fixing with necessary wooden blocks fixed in the masonry walls in cement mortar (1½:1) and including fixing of M.S. clamps if necessary with required no. of Bombay nails including cost and conveyance, of all materials , conveyance of all materials and labour charges for fixing of pipes in position as directed by Engineer-in-charge for finished item of work.etc., complete (a) 75 mm dia

Development of Graveyard;Supplying & fixing CI Plain bends Ist quality ISI marked conforming to IS:1729-1979 with cement caulked joints and fixing as per site requirements with standard practice including painting black with Japan paint and fixing with necessary wooden blocks fixed in the masonry walls in cement mortar (1½:1) and including fixing of M.S. clamps if necessary with required no. of Bombay nails including cost and conveyance, of all materials , conveyance of all materials and labour charges for fixing of pipes in position as directed by Engineer- in-charge for finished item of work.etc., complete (a) 75 mm dia

Development of Graveyard;Supplying & fixing of CI soil single junction with plug of Ist quality ISI marked conforming to IS:1729-1979 with cement caulked joints and fixing as per site requirements with standard practice including painting black with Japan paint and fixing with necessary wooden blocks fixed in the masonry walls in cement mortar (1½:1) and including fixing of M.S. clamps if necessary with required no. of Bombay nails including cost and conveyance, of all materials , conveyance of all materials and labour charges for fixing of pipes in position as directed by Engineer-in-charge for finished item of work.etc., complete (a) 75 mm dia

Development of Graveyard;Supplyand fixing of UPVC Pipe including cost and conveyance of all materials etc complete (a) 15 mm dia UPVC PIPE

Development of Graveyard;32 MM DIA

Development of Graveyard;S&F of 15 mm brass body CP finish bib tap of not less than 300 grams weight screw type (full turn) with internal / external threaded connection conforming to IS 8931 as per special specification and as directed by the Engineer-in-charge for finished item of work at all levels including cost & conveyance, of all materials, labour charges for finished item of work as per special specification and as directed by the Engineer-in-charge for finished item of work. (a) 15mmd ia

Development of Graveyard;SHOWERS

Development of Graveyard;Providing & Placing on Terrace (at all floor levels) polyethylene water storage tank with Double layer approved brand & manufacture with cover and suitable locking arrangement & making necessary holes for inlet & outlets and over flow pipes but without fittings & base support for tanks (a) PVC Water tank

Development of Graveyard;supply and fixing of Burning stands cast iron including cost and conveyance of all materials etc complete

Development of Graveyard;Providing skirting/Dadooing to internal walls with Supply of glazed red or white full body ceramicwall tiles of size 300 x 450 mm / 320 mm x 400 mm and thickness 6 mm 1st quality conforming to IS:13711, IS:13712, IS:13630 (Parts 1 to 15) of any colour and finish in all shades and designs of any colour and finish in all shades and design set over base coat of CM (1:3) 12 mm thick with cement slurry of honey like consistency spread at the rate of 3.30 kgs per sqm and jointed with white cement paste mixed with pigment of matching shade to full depth, including cost of all materials like tiles, cement, sand and water etc., complete including etc., complete for finished item of work

Development of Graveyard;Construction of Gravel base including cost, and conveyance of all materials to work site and spreading in uniform layers by approved means, on prepared surface and compacting with three wheel 80-100 kN static roller / Vibratory Roller 80-100 kN to achieve the desired density at OMC etc., complete for finished item of work as per MoRT&H Specification 401& 408 (5th revision) and as directed by the Engineer-in- charge.

Development of Graveyard;Providing, laying, spreading and compacting graded stone aggregate to wet mix macadam specification including premixing the material with water at OMC in mechanical mixer (Pug Mill), carriage of mixed material by tipper to site, laying in uniform layers in sub-base/base course on a well prepared sub-base and compacting with smooth wheel roller of 80 to 100kN / Vibratory Roller 80-100 kN weight to achieve the desired density including lighting, barricading and maintenance of diversion, etc as per Tables 400.11 & 400.12 and Technical Specification Clause 406 MORD / MORTH.