Hyderabad Metropolitan Development Authority Tender

Refurbishment of Park at Sagar Housing complex Phase I Road No 5 BN Reddy Nagar Division LBNagar;Providing Annual Maintenance for for all equipment and EPDM flooring 2nd Year @ 3% as directed by Engineer in charge

Refurbishment of Park at Sagar Housing complex Phase I Road No 5 BN Reddy Nagar Division LBNagar;Supply and Fixing of 25 MM EPDM: Providing & Laying of EPDM (Ethylene Propylene Diene Monomer) Safety & Sports total 25MM [ 19 MM SBR & 6 MM EPDM ] thick Rubber flooring systems comprising two layers with the top layer of 6mm being high-quality EPDM granules and the bottom layer is 19 mm SBR There are two types of pigments used in our EPDM which are organic and inorganic. Inorganic pigments are used to manufacture Class 1 colors which are more stable. The granules shall be mixed on-site with specially developed binders and trowelled by hand to specified thickness creating a seamless surface. The flooring system shall be hygienic, durable with high elasticity, all-weather, resilient, nonslip, high impact, and easy maintenance EPDM. The performance requirements and test methods for an impact-absorbing playground surfacing shall comply with SS 495:2001 or ASTM Standards as directed by Engineer in charge

Refurbishment of Park at Sagar Housing complex Phase I Road No 5 BN Reddy Nagar Division LBNagar;DOUBLE CROSS WALKER /SKY WALKER (LFI-44) Providing & Fixing Sky Walker made from G.I. pipe. Dimensions:(L×W×H)=1500×700×1800 mm 1) Main Frame- Ø 114 mm OD G.I ("C" class) pipe. 2) Foundation Plate-M.S round plate of Ø 220 mm & 10 mm thickness. 3) Paddle Vertical support- Ø 48 mm OD "B" class G.I Pipe. 4) Remaining Frame- Ø 60 mm and Ø 42 mm OD "B" class G.I Pipe. 5) Handle- Ø 33 mm OD "B" class G.I. Pipe dually bending design. 6) Leg Movement frame-80 mm×40 mm×3.5 mm thick rectangular pipe. 7) Footrest-cast iron 320×155 ×2.5 mm thickness. 8) Bracket-6 mm thick laser profile is use to support leg movement frame. 9) Top closing cap-dome shaped by SS material. 10) Bearing-Deep Grooveé Self Aligning Ball Bearings with permanent lubricated reputed brand. 11) Bearing Bushes-Ø 60 mm OD seamless pipe. Bearing bush closing caps- SS material. Grips- High Quality Rubber Ø 46 mm OD. Coating-Best quality of powder coating 80-100 microns thickness. Hardware-Grade ? 4.6 galvanized. Maximum loading weight-240 kg and only two persons can use at a time. Safety Instructions and Exercise chart - start & finish position stick on product as directed by Engineer in charge

Refurbishment of Park at Sagar Housing complex Phase I Road No 5 BN Reddy Nagar Division LBNagar;LEG EXTENSION(LFI-49) Providing and fixing Leg Extension made from G.I. pipe. Dimensions:(L×W×H)=1000×620×910mm 1) Main Frame-Ø 114 mm OD G.I ?C" class make Jindal pipe. 2) Foundation Plate-M.S round plate of Ø 220 mm & 10 mm thickness. 3) Handle- made up of Ø 42 mm OD "B" class G.I. make Apollo Pipe. 4) Seat frame-Ø 42 mm OD "B" class G.I. make Apollo Pipe. 5) Seat-300×300 mm×2 mm thick with corner fillet for safety. 6) Leg Frame- Ø 42 mm OD "B" class G.I. make Apollo Pipe. 7) Bearing-Deep Grooveé Self Aligning Ball Bearings with permanent lubricated reputed brand. 8) Bearing Bushes-Ø 60 mm OD seamless pipe. Top Closing Caps-SS material. Coating-Best quality of powder coating 80-100 microns thickness. Hardware-Grade ? 4.6 galvanized. Maximum loading weight-120kg and only one person can use at a time. Safety Instructions and Exercise chart - start & finish position stick on product as directed by Engineer in charge

Refurbishment of Park at Sagar Housing complex Phase I Road No 5 BN Reddy Nagar Division LBNagar;LEG PRESS DOUBLE (LFI-48) Providing and fixing Leg Press Double made from G.I. pipe. Dimensions:(L×W×H)=1900×400×1600mm 1) Main Frame-Ø 114 mm OD G.I ?C" class pipe. 2) Foundation Plate-M.S round plate of Ø 220 mm & 10 mm thickness. 3) Seat frame-Ø 42 mm OD "B" class G.I. Pipe. 4) Seat-300×300 mm×2 mm thick G.I seat with corner fillet for safety. 5) INTERNAL LIMITORS is used for this equipment because at this stage maximum level reaches, if this is operated beyond the maximum level which causes to physical damage that?s y Limiters are used to resist an equipment. 6) Bearing-Deep Grooveé Self Aligning Ball Bearings with permanent lubricated Reputed brand. 7) Bearing Bushes-Ø 60 mm OD seamless pipe. 8) Bearing bush closing cap- SS material. Top Closing Caps-SS material. Coating-Best quality of powder coating 80-100 microns thickness. Hardware-Grade ? 4.6 galvanized. Maximum loading weight-240kg and only two persons can use at a time. Safety Instructions and Exercise chart - start & finish position stick on product as directed by Engineer in charge

Refurbishment of Park at Sagar Housing complex Phase I Road No 5 BN Reddy Nagar Division LBNagar;ELLIPTICAL MACHINE (LFI-51) Providing and fixing Elliptical Machine as follows. Dimensions:(L×W×H)=1400×700×1750mm, MOC : Fabricated with pipes & Tubes. Bearings : Deep groove/ self aligning ball bearings, Handle Bars: High Quality Grip Rubber Painting : Powder coating, Hardware: Grade ? 4.6 galvanized 1. Maximum loading weight : 120 kg 2. Grip diameter : 33 Ø 3. No. of users 2 4. Foundation Pipe : 550 mm 5. Main post pipe : 114 Ø 6. Thickness : 4 mm 7. Supporting structure : 42 Ø Top Closing Caps-SS material. Coating-Best quality of powder coating 80-100 microns thickness. Hardware-Grade ? 4.6 galvanized. Maximum loading weight-240kg and only two persons can use at a time. Safety Instructions and Exercise chart - start & finish position stick on product as directed by Engineer in charge

Refurbishment of Park at Sagar Housing complex Phase I Road No 5 BN Reddy Nagar Division LBNagar;AB Bourd Duos : Technical Specification: double equipment main 1) Dimensions (LxWxH): 1500 x 1500 x 900 mm 2) Fabricated with main post of NB 100mm (G.I.) ?C? Class Pipe of approved make. 3) Main frame of NB 50mm (G.I.) ?C? Class Pipe. 4) Support frame of NB 32mm & NB 25mm (G.I.) ?C? Class Pipe. (?NB? stands for Nominal Bore Size i.e., Internal Diameter of pipe in millimeters). 5) All Pipes are powder coated with 80-120 micron thick AkzoNobel or equivalent Paints. 6) All joints of pipe are robotic welded with joints scalloped as necessary and dressed off removing sharp edges and burrs. 7) Zinc primer paint is applied at all the welding points prior to finishing. 8) Maintenance free bearings of SKF or equivalent make duly oil sealed and self-lubricated are used in the equipment manufactured. 9) Seats made up from round MS Sheet Metal. 10) Once the concrete is set, the equipment is fixed on to it. 11) High tensile steel with galvanized nut bolts are used for assembly. 12) Equipment made to EN16630 & DIN 79000 International standard for outdoor fitness equipment. 13) Self-Explanatory stainless steel label fixed on equipment for ease of use. 14) Base plate cover and all open end pipes covered by SS / LLDPE Caps as directed by Engineer in charge

Refurbishment of Park at Sagar Housing complex Phase I Road No 5 BN Reddy Nagar Division LBNagar;Shoulder Back Twist or Arm wheel: Technical Specification: Arm wheel in a pair with below specifications: 1) Dimensions (LxWxH): 850 x 800 x 1800 mm 2) Fabricated with main post of NB 100mm (G.I.) ?C? Class Pipe of approved make. 3) Wheel frame of NB 32mm with connecting spokes of NB 25mm, Pipe connecting main pilar with wheel frame of NB 50mm. All pipes must be (G.I.) ?C? Class Pipes. (?NB? stands for Nominal Bore Size i.e., Internal Diameter of pipe in millimeters). 4) All Pipes are powder coated with 80-120 micron thick AkzoNobel or equivalent Paints. 5) All joints of pipe are robotic welded with joints scalloped as necessary and dressed off removing sharp edges and burrs. 6) Zinc primer paint is applied at all the welding points prior to finishing. 7) Base plate cover made of virgin LLDPE plastic by rotational molding with 4.00mm thickness, UV resistant and colored. 8) Maintenance free bearings of SKF or equivalent make duly oil sealed and self-lubricated are used in the equipment manufactured. 9) Once the concrete is set, the equipment is fixed on to it and nuts and bolts are covered with base plate cover. 10) High tensile steel with galvanized nut bolts are used for assembly. 11) Equipment made to EN16630 & DIN 79000 International standard for outdoor fitness equipment. 12) Self-Explanatory stainless steel label fixed on equipment for ease of use as directed by Engineer in charge

Refurbishment of Park at Sagar Housing complex Phase I Road No 5 BN Reddy Nagar Division LBNagar;Vertical Shoulder Pull or Pull chair: Technical Specification Pull chair in a pair with the below specifications: 1) Dimensions (LxWxH): 2400 x 800 x 2000 mm 2) Fabricated with the main post of NB 100mm (G.I.) ?C? Class Pipe of approved make. 3) Seat main frame of NB 50mm (G.I.) ?C? Class Pipe, Pipe connecting main post with handle frame of NB 65mm (G.I.) ?C? Class Pipe. 4) Handle frame of NB 32mm (G.I.) ?C? Class Pipe. (?NB? stands for Nominal Bore i.e., Internal Diameter of pipe in millimeters) 5) All Pipes are powder coated with 80-120 micron thick AkzoNobel or equivalent Paints. 6) All joints of pipe are robotically welded with joints scalloped as necessary and dressed off removing sharp edges and burrs. 7) Zinc primer paint is applied at all the welding points before finishing. 8) Handlebars are provided with high-end quality rubber grips. 9) Base plate cover made of virgin LLDPE plastic by rotational molding with 4.00mm thickness, UV resistant, and colored. 10) Seat to be made up from virgin LLDPE manufactured by rotational molding with 4.00 mm thickness, colored, UV resistant, and environmentally friendly. 11) Maintenance-free bearings of SKF or equivalent make duly oil sealed and self-lubricated are used in the equipment manufactured. 12) The equipment is fitted with inbuilt limiters to prevent unwanted movements. 13) Once the concrete is set, the equipment is fixed onto it, and nuts and bolts are covered with a base plate cover. 14) High tensile steel with galvanized nut bolts is used for assembly. 15) Equipment made to EN16630 & DIN 79000 International standard for outdoor fitness equipment. 16) Self-Explanatory stainless steel label fixed on equipment for ease of use as directed by Engineer in charge

Refurbishment of Park at Sagar Housing complex Phase I Road No 5 BN Reddy Nagar Division LBNagar;Twister 3 in 1: Technical Specification: Triple twister with below dimensions: 1) Dimensions (LxWxH): 1300 x 1300 x 1650 mm 2) Fabricated with the main post of NB 100mm (G.I.) ?C? Class Pipe of approved make. 3) Handle the Main frame of NB 32mm (G.I.) ?C? Class Pipe. 4) Handle frame spokes of NB 25mm (G.I.) ?C? Class Pipe. (?NB? stands for Nominal Bore Size i.e., Internal Diameter of pipe in millimeters). 5) Foothold plate of made of MS Sheet Metal of 3mm thickness. 6) All Pipes are powder coated with 80-120 micron thick AkzoNobel or equivalent Paints. 7) All joints of pipe are robotically welded with joints scalloped as necessary and dressed off removing sharp edges and burrs. 8) Zinc primer paint is applied at all the welding points before finishing. 9) Maintenance-free bearings of SKF or equivalent make duly oil sealed and self-lubricated are used in the equipment manufactured. 10) Once the concrete is set, the equipment is fixed onto it. 11) High tensile steel with galvanized nut bolts is used for assembly. 12) Equipment made to EN16630 & DIN 79000 International standard for outdoor fitness equipment. 13) Self-Explanatory stainless steel label fixed on equipment for ease of use as directed by Engineer in charge

Refurbishment of Park at Sagar Housing complex Phase I Road No 5 BN Reddy Nagar Division LBNagar;Chest Push: Technical Specification: Seated chest press in a pair with the below specifications: 1) Dimensions (LxWxH): 1800 x 700 x 2000 mm 2) Fabricated with the main post of NB 100mm (G.I.) ?C? Class Pipe of approved make. 3) Seat Main frame of NB 50mm (G.I.) ?C? Class Pipe. 4) Handle frame of NB 32mm and NB 25mm (G.I.) ?C? Class Pipe. (?NB? stands for Nominal Bore Size i.e., Internal Diameter of pipe in millimeters). 5) All Pipes are powder coated with 80-120 micron thick AkzoNobel or equivalent Paints. 6) All joints of pipe are robotically welded with joints scalloped as necessary and dressed off removing sharp edges and burrs. 7) Zinc primer paint is applied at all the welding points before finishing. 8) Handlebars are provided with high-end quality rubber grips. 9) Base plate cover made of virgin LLDPE plastic by rotational molding with 4.00mm thickness, UV resistant, and colored. 10) Seat to be made up from virgin LLDPE manufactured by rotational molding with 4.00 mm thickness, colored, UV resistant, and environmentally friendly. 11) Maintenance-free bearings of SKF or equivalent make duly oil sealed and self-lubricated are used in the equipment manufactured. 12) The equipment is fitted with inbuilt limiters to prevent unwanted movements. 13) Once the concrete is set, the equipment is fixed onto it, and nuts and bolts are covered with a base plate cover. 14) High tensile steel with galvanized nut bolts is used for assembly. 15) Equipment made to EN16630 & DIN 79000 International standard for outdoor fitness equipment. 16) Self-Explanatory stainless steel label fixed on equipment for ease of use as directed by Engineer in charge

Refurbishment of Park at Sagar Housing complex Phase I Road No 5 BN Reddy Nagar Division LBNagar;Leg Stretch Straight or Air walker: Technical Specification: double equipment 1) Dimensions (LxWxH): 1100 x 450 x 1300mm. 2) Fabricated with the main post of NB 100mm (G.I.) ?C? Class Pipe of approved make. 3) ?U? shaped the main frame of NB 80mm (G.I.) ?C? Class Pipe, Leg Support frame of NB 50mm (G.I.) ?C? Class Pipe. 4) Handle frame pipes of NB 32mm (G.I.) ?C? Class. (?NB? stands for Nominal Bore i.e., Internal Diameter of pipe in millimeters) 5) All Pipes are powder coated with 80-120 micron thick AkzoNobel or equivalent Paints. 6) All joints of pipe are robotically welded with joints scalloped as necessary and dressed off removing sharp edges and burrs. 7) Zinc primer paint is applied at all the welding points prior to finishing. 8) Base plate cover made of virgin LLDPE plastic by rotational molding with a minimum 4.00mm thickness, UV resistant, and colored. 9) Foothold made of Co-Polymer Plastic with rounded edges to prevent impact and injury. 10) Maintenance-free bearings of SKF or equivalent make duly oil sealed and self-lubricated are used in the equipment manufactured. 11) The equipment is fitted with inbuilt limiters to prevent unwanted movements. 12) Once the concrete is set, the equipment is fixed onto it and nuts and bolts are covered with a base plate cover. 13) High tensile steel with galvanized nut bolts is used for assembly. 14) Equipment made to EN16630 & DIN 79000 International standard for outdoor fitness equipment. 15) Self-Explanatory stainless steel label fixed on equipment for ease of use as directed by Engineer in charge as directed by Engineer in charge

Refurbishment of Park at Sagar Housing complex Phase I Road No 5 BN Reddy Nagar Division LBNagar;Supply & application of one coat of based cement primer of exterior grade II and two coats of acrylic emulsion paint exterior grade with silicon additives having VOC (Volatile Organic Compound) content less than 50 grams/litre for exterior walls including cost and conveyance of all materials to site, all incidental, operational and all labour charges etc., and overheads & contractors profit complete for finished item of work to new walls as directed by Engineer in charge

Refurbishment of Park at Sagar Housing complex Phase I Road No 5 BN Reddy Nagar Division LBNagar;Plastering 20mm thick in two coats using screened sand (with 50% river sand and 50% Manufactured sand) with a base coat of 16mm thick in CM (1:6) and top coat of 4mm thick in CM (1:4) with dubara sponge finishing including cost and conveyance of all materials like cement, sand, water etc., to the site, including all operational, incidental and labour charges for mixing mortar, finishing, curing, including cutting grooves as directed by Engineer - in - charge etc., and overheads & contractors profit complete for finished item of work. ( External walls ) as directed by Engineer in charge

Refurbishment of Park at Sagar Housing complex Phase I Road No 5 BN Reddy Nagar Division LBNagar;Brick Masonry in CM (1:6) with 2nd class Bricks traditional size 23 x 11 x 7 cms including cost and conveyance of all materials like cement, fine aggregate (with 50% river sand & 50% manufactured sand), bricks, water etc., to the site, including all Operational, Incidental and labour charges, like mixing cement mortar, constructing masonry, curing, including overheads and contractors profit etc., complete for finished item of work as directed by Engineer in charge

Refurbishment of Park at Sagar Housing complex Phase I Road No 5 BN Reddy Nagar Division LBNagar;Supply and fixing of MS Angles of required sizes including cost and conveyance of all materials to the site, including all Operational, Incidental and Labour Charges for fabrication and fixing etc., Overheads and contractor's Profit complete for the finished item of the work as directed by Engineer in charge

Refurbishment of Park at Sagar Housing complex Phase I Road No 5 BN Reddy Nagar Division LBNagar;Supply and fixing of MS Pipes of required sizes including cost and conveyance of all materials to the site, including all Operational, Incidental and Labour Charges for fabrication and fixing etc., Overheads and contractor's Profit complete for the finished item of the work as directed by Engineer in charge

Refurbishment of Park at Sagar Housing complex Phase I Road No 5 BN Reddy Nagar Division LBNagar;Plain Cement Concrete (1:3:6) (cement: fine aggregate: Coarse aggregate) with hand mixing under foundations and under flooring bed using coarse aggregate 40mm size hard, machine crushed granite from approved quarry including cost and conveyance of all materials like cement, fine aggregate (with 50% river sand & 50% manufactured sand), coarse aggregate, water etc. to site, including all Operational, Incidental and Labour charges for mixing, laying, Curing of concrete, overheads & contractors profit complete for finished item of work as directed by Engineer in charge

Refurbishment of Park at Sagar Housing complex Phase I Road No 5 BN Reddy Nagar Division LBNagar;Plain Cement Concrete (1:4:8) (cement: fine aggregate: Coarse aggregate) with hand mixing under foundations and under flooring bed using coarse aggregate 40mm size hard, machine crushed granite from approved quarry including cost and conveyance of all materials like cement, fine aggregate (with 50% river sand & 50% manufactured sand), coarse aggregate, water etc. to site, including all Operational, Incidental and Labour charges for mixing, laying, Curing of concrete, overheads & contractors profit complete for finished item of work as directed by Engineer in charge

Refurbishment of Park at Sagar Housing complex Phase I Road No 5 BN Reddy Nagar Division LBNagar;Earth work excavation for BUILDING foundations and depositing on bank for all lifts and with an initial lead of 10m including all operational, incidental, labour charges such as shoring ,sheeting, planking, strutting, etc. and overheads and contractor profit complete for finished item of work excluding dewatering charges as per SS 20B (APSS 308) in Ordinary Soil-Manual Means as directed by Engineer in charge