Hyderabad Metropolitan Development Authority Tender

Item;Providing and laying bituminous concrete with 100-120 TPH batch type hot mix plant producing an average output of 75 tonnes per hour using crushed aggregates of specified grading II (13 mm nominal size), premixed with bituminous binder VG 30 @ 5.4 per cent of mix and filler, transporting the hot mix to work site, laying with a hydrostatic big paver finisher with sensor control to the required grade, level and alignment, rolling with smooth wheeled, vibratory and tandem rollers to achieve the desired compaction as per MORTH specification clause No. 509 complete in all respects with all leads (MORTH 5.8)including Contractors profit and overhead charges but excluding Seigniorage Charges complete for fiished item of work and as directed by the Engineer-in-charge

Item;Providing and laying of Dense Graded Bituminous Macadam with 100 - 120 TPH batch type hot mix plant producing an average output of 75 tones per hour using hard blasted granite crushed aggregates of Grading - II as per table 500-10 of MoRT&H Specification 507 (5th revision) premixed with bituminous binder of VG-30 grade @ 4.5% of weight of total mixture and , transporting to site, laid over a previously prepared surface with a hydrostatic paver finisher with sensor control to the required grade, level and alignment and rolled as per Clauses 501.6 and 501.7 with smooth wheeled, vibratory and tandem rollers to achieve the desired compaction including hire and operational charges all T&P and all other contingent charges necessary including cost of (excluding seigniorage) charges of all materials etc.including contractors profit and overheads complete for finished item of work and as directed by engineer in charge.

Item;Providing and applying tack coat with Bitumen emulsion (RS-1) (Rapid Setting) using emulsion pressure distributor at the rate of 0.20 kg per sqm on the prepared bituminous surface cleaned with Hydraulic broom including conveyance of bitumen emulsion round the trip as per Technical Specification Clause 503 MORD, including Contractors profit and overhead charges but excluding Seigniorage Charges complete for fiished item of work and as directed by the Engineer-in-charge

Item;Providing and applying primer coat with bitumen emulsion (SS-1) on prepared surface of granular base including cleaning of road surface and spraying primer at the rate of 0.60-1.0 kg/sqm using mechanical means as per Technical Specification Clause 502 MORD (for use on Wet mix macadam & WBM) etc. complete for finished item of work and as directed by Engineers-in-charge.

Item;Providing, laying, spreading and compacting graded stone aggregate to wet mix macadam specification including premixing the material with water at OMC in mechanical mixer (Pug Mill), carriage of mixed material by tipper to site, laying in uniform layers in sub-base/base course on a well prepared sub-base and compacting with smooth wheel roller of 80 to 100kN / Vibratory Roller 80-100 kN weight to achieve the desired density including lighting, barricading and maintenance of diversion, etc as per Tables 400.11 & 400.12 and Technical Specification Clause 406 MORD / MORTH. with 5.00 Km lead for Pug Mill but excluding seignorage charges. Complete for finished item of work and as directed by the Engineer-in-charge.

Item;Construction of granular sub-base by providing well graded / Close Graded material Grading III with minimum CBR of 20, mixing in a mechanical mix plant at OMC, carriage of mixed material to work site upto lead of 1000 m spreading in uniform layers with motor grader on prepared surface and compacting with vIBRATORY wheel roller 80-100 kN to achieve the desired density, complete as per Technical Specification Clause 401 (MORTH 4.1),including Contarctor's profit and overhead charges but excluding seignorage charges, complete for finished item of work and as directed by the Engineer-in-charge

Item;Dismantling of existing structure of cement concrete pavement including T&P and scaffolding wherever necessary, sorting the dismantled material, disposal of unserviceable material and stacking the serviceable material with all lift charges and lead of 1000 metres. including contractor profit and overhead charges, but excluding Seigniorage Charges etc., complete for finished item of work and as directed by Engineer in charge.

Item;Providing, fabricating and placing in position reinforcement steel for RCC,below 36 dia rods overlaps and wastages wherever required, tying with 1.25 mm diameter soft annealed steel wire, including cost of all materials, machinery, labour etc., complete with initial lead upto 1 km and all lift charges.including contractor profit and overhead charges, but excluding Seigniorage Charges and taxes on all materials etc., complete for finished item of work and as directed by Engineer in charge

Item;Supply and placing of the Ready Mix (RMC) Standard Design Mix Concrete M20 grade as per IS4926-2003 with cement content of 350kg/cum as per IScode 456-2000 using 20mm graded metal, Admixtures from standard suppliers approved by the department including pumping, laying concrete, vibrating, curing etc complete but excluding cots of steel and its fabrication charges, centering, shuttering for finished item of work. including contractor profit and overhead charges, but excluding Seigniorage Charges etc complete for finished item of work and as directed by Engineer in charge for top slab of 200mm thick & Manholes

Item;Supply and placing of the Ready Mix (RMC) Standard Design Mix Concrete M20 gradewith a cement content of 350kg/cum as per IS4926-2003 with minimum cement content as per IScode 456-2000 using 20mm graded metal, Admixtures from standard suppliers approved by the department including pumping, laying concrete, vibrating, curing etc complete but excluding cots of steel and its fabrication charges, centering, shuttering for finished item of work. including contractor profit and overhead charges, but excluding Seigniorage Charges etc complete for finished item of work and as directed by Engineer in charge for 350mm thick wall & Manholes

Item;Supply and placing of the Ready Mix (RMC) Standard Design Mix Concrete M20 grade as per IS4926-2003 with minimum cement content of 350 kg/cum as per IScode 456-2000 using 20mm graded metal, Admixtures from standard suppliers approved by the department including pumping, laying concrete, vibrating, curing etc complete but excluding cots of steel and its fabrication charges, centering, shuttering for finished item of work. including contractor profit and overhead charges, but excluding Seigniorage Charges etc complete for finished item of work and as directed by Engineer in charge for base slab & Manholes

Item;Manufacture, Supply and Delivery of R.C.C. Spun / Vibrated Cast (Reinforced) Socket and Spigot pipes of 1600mm dia NP4 internal dia conforming to B.I.S. 458/2003 at exfactory (rate per meter of effective length) including laying and jointing, conveyance to site and testing, including all lead and lift charges, contractor profit and overhead charges, but excluding Seigniorage Charges etc., complete for finished item of work and as directed by Engineer in charge for 1600 mm dia NP4

Item;Manufacture, Supply and Delivery of R.C.C. Spun / Vibrated Cast (Reinforced) Socket and Spigot pipes of 1400mm dia NP4 internal dia conforming to B.I.S. 458/2003 at exfactory (rate per meter of effective length) including laying and jointing, conveyance to site and testing, including all lead and lift charges, contractor profit and overhead charges, but excluding Seigniorage Charges etc., complete for finished item of work and as directed by Engineer in charge for 1400 mm dia NP4

Item;Refilling with usefull available excavated earth / soils in trenches ,sides of foundations & basement and the pipeline trenches after laid, jointed, executed, tested with intial lead in layors not exceeding 15 cm thick , consolidating each deposited layer by watering consolidting each layer by watering and ramming including cost and conveyonce of water to work site and all operational ,incidental,labour charges,hire charges of T&P .,complete for finished item of work (APSS No.309&310)

Item;Carting away unuseful excavated rock at site and pipe line trench earth including transportation of 2 km(in addition to initial 1Km) away from the work spot, including loading and unloading, Contractor's profit and overhead charges complete for finished item and as directed by the Engineer-in-charge.

Item;Carting of surplus excavated Earth from the site to a distance of 5 km excluding initial lead, loading, unloading charges, cost & conveyance, dumping, labour charges, all leads & lift charges and other incidental and operational charges including contractor profit and overhead charges, but excluding Seigniorage Charges etc., complete for finished item of work and as directed by Engineer in charge.

Item;Providing PCC 1:2:4 Nominal mix using 20mm size graded machine crushed HBG metal from approved quarry with a cement content of 320kg/cum including cost and conveyance of all materials like cement, sand, coarse aggregate, water etc., to site and including , sales & other taxes on all materials including all operational, incidental and labour charges such as machine mixing, Centering Charges ,laying concrete, curing etc., excluding seigniorag Charges complete for finished item of work and directed by Engineer in charge

Item;Earth work excavation in Hard rock (blasting prohibited)-Upto 3 m depth for pipeline trench and depositing on bank for all lifts and with an initial lead of 10m including all operational, incidental, labour charges such as shoring ,sheeting, planking, strutting, etc. complete for finished item of work excluding seigniorag Charges and dewatering charges etc as per SS - 20 B (APSS 308).

Item;Excavation for trenches in soil with hydraulic excavator of 0.9 cum bucket capacity including cutting and loading in tippers, trimming bottom and side slopes, in accordance with requirements of lines, grades and cross-sections, and transporting to the embankment location with all lift charges and lead upto 1000 m as per Technical Specification Clause 302.3 MORD / 301 MORTH for Pipe Line Trenches, including provision for narrow trenches in restricted areas, all labour charges,operational charges, contractor profit and overhead charges, but excluding Seigniorage Charges etc complete for finished item of work and as directed by Engineer in charge