Centre For Cellular And Molecular Biology Tender

Supply, installation testing and commissioning of 3 phase 415V, 50 Hz, 1500 RPM, 320kVA salient type (having acoustic enclosure canopy approved by CPCB as per specifications attached)DG sets. The DG set have :(a) The engine: shall have water/coolant cooled multi cylinder diesel engine capable of delivering minimum 390.00 BHP complete with fuel filter, air filter, by pass filter starter, Dynamo flywheel, coupling guard, governor, battery charger alternator, fuel/feed pump. Electric hour meter either on the instrument panel or on the control panel etc. complete as per specifications and required( Engine Make and model shall be scheduled as per Annexure attached). (b) The alternator: shall be of Three phase, 4 wire, 50 Hz,0.8 PF at 415 volts, 1500 RPM. Capable of delivering 320 kVA coupled to diesel engine mentioned in (a) above (Alternator make and model shall be selected out of list as per Annexure attached). The DG set shall include all accessories items, protections, safety parameters, control Panel, base frame with anti- vibration mount pad, fuel tank with indicator, fuel pipe with pump, residential type exhaust silencer, 2X12 volt 180 amp- hour battery complete with copper conductor battery leads of required length and socket/clamps including M.S stands for battery with wooden base, adaptor box etc complete as required for a 320 kVA DG Set as per the manufacturer recommendations or as per direction of the engineer in charge at site. (Note: 1.The agency provides CPCB approval, manufacture test report of all major items, before delivery of material at site.) 2.The rate are included with minor civil works, synthetic insulating mat suitable for 11kv required for DG set as per site available. `

Supply, installation testing and commissioning of floor mounted totally enclosed sheet 16SWG steel AMF panel suitable for operation of 320KVA DG set comprising of ACB‟s for alternator and main supply and shall include all accessories such as bus bar fitting, instruments protection, control unit, MCB, Dial plates, control cables for connecting DG set and AMF panel complete etc. As per specification requirement. Note: 1. The rate are included with civil works and synthetic insulating mat suitable for 11kv required for AMF panel as per site available ` 2. The agency shall get approval and inspected from the concerned engineer in-charge for drawings before the start of fabrication and dispatch)

Supplying,testing, commissioning of 3.5 X 240 sq mm,1100 volt grade aluminum armored XLPE insulated and sheathed aluminum conductor cable including cost of providing with proper clamps, identification tags/route marker etc. as per site requirement. ( DG-set foundation distance from PCC-AC breaker is about 15 Rmt)