Public Works Department Tender
Search from a plethora of business opportunities for Tamil Nadu tenders posted on the eProcurement TamilNadu website and other online and offline sources. Here, on BidAssist, you can find the best tender opportunities to boost your enterprise by finding work in Tamil Nadu government tenders, PSUs, Municipal Corporations and more. Read on to learn about the bidder registration process, DSC and more.
Public Works Department - PWD Tender
Civil And Construction
Building Construction
Eprocure
Opening Date24 Jun 2024
Closing Date27 Jun 2024
Tender Amount₹ 5,63,00,000
Costs
EMD
₹ 2,91,500Document Cost
Refer DocumentsTender Fee
Refer Documents
Description
Scription for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user
Contact
Tender Id
2024_PWD_456718_1Bid Award Id
ViewTender No
TNPWD/01 BCM 01/2024-25Tender Authority
Public Works Department ViewPurchaser Address
-Website
http://tntenders.gov.in
GEM & Bid Advisory Services
Get portal registration, tender bidding, product/service listing or vendor/MSME certification services at a nominal cost
Documents
Price Tender Condition Document
BOQ Items
Supplying and filling in foundation, basement, etc with filling M-sand in layers of not more than 15cm thick well watered, rammed and consolidated etc. complete complying with standard specification and as directed by the departmental officers.
228
-
-
Providing laying spreading and compacting grade stone aggregate to WET mix Macadam specication including premixing the meterial with water at OMC in mechical mix plant carriage of mixed material by tripper to site laying in uniform layers with pavers in sub base/base course on well prepared surface and compacting with vibratory roller to acheive the desired density etc., complete as per clause 406 morth rev - 5 specification
215
-
-
Cement Concrete 1:5:10 (One Cement, Five sand and Ten hard broken stone jelly) using 40 mm gauge hard broken granite stone jelly for foundation including dewatering wherever necessary and laid in layers of not more than 15 cm thick well rammed, consolidated and curing etc. complete complying with standard specification
228
-
-
Supplying and filling of well gravel by lorry in basement filling including conveyance loading and unloading charges and all other incidential charges filling laying watering and consolidation etc., complete complying with standard specifications and as directed by the Departmental Officers
180
-
-
Supplying and filling in basement with Stone dust (Quarry dust) in layers of not more than 15 cm thick, well rammed watered and consolidated etc. complete complying with standard specification and as directed by the departmental officers.
355
-
-
Supplying and erecting steel centering including necessary supports for plane surfaces for Reinforced Cement Concrete works such as column footings, column pedestals, plinth beams, grade beams, staircase steps, etc. which require only nominal strutting using mild steel sheets of size 90cm x 60cm and 10 BG stiffened with welded mild steel angles of size 25mm x 25mm x 3 mm for boarding, laid over silver oak joists of size 10cm x 6.5cm spaced at about 75cm centre to centre or at suitable intervals etc. complete in all floors complying with standard specifcation. (Payment for centering shall be given after the concrete is laid)
700
-
-
Supplying and erecting centering for sides and soffits including necessary supports and strutting upto 3.29 M height for plane surfaces as detailed below in all floors with all cross bracings using Mild Steel sheets of size 90 x 60 cm and 10 BG stiffened with welded Mild Steel angle of size 25mm x 25mm x 3 mm for boarding laid over silver oak joists of size 10cm x 6.50 cm spaced at abote 90 cm centre to centre and supported by casurina props of 10cm to 13 cm dia spaced at not more than 75 cm centre to centre etc. complete complying with the standard specificaiton. (Payment for centering shall be given after the concrete is laid)
-
-
-
For plane surfaces such as RCC floor slab, roof slab, beams, lintels, bed blocks, landing slab, waist slab, portico slabs and beams, etc.
2200
-
-
For plane surfaces such as vertical slab, side slabs of boxing, vertical drops, facia, vertical wall, etc.
245
-
-
For plane surfaces such as rectangular or square RCC columns, sunshades, top and bottom slab of RCC boxing, etc.
1050
-
-
Providing and laying in position, Standardised Concrete Mix M-30 Grade in accordance with IS:456-2000,using 20mm and down graded hard broken granite stone jelly for all RCC items of works with minimum cement content of 400 kglms and maximum water cement ratio of 0.45, including admixture (plasticiser / super plasticiser) in recommended proportions as per IS:9103 to accelerate, retard setting of concrete, improve workability without impairing strength and durability with about (5.0 cu.m.) 7730 kg. of 20mm machine crushed stone jelly and with about (3.3 cu.m.) 5156 kg of 10-12mm machine crushed stone jelly and with about (4.79 cu.m') 7670 kg. of sand, but excluding cost of reinforcement grill and fabricating charges, centering and shuttering and also including laying, vibrating with mechanical vibrators, finishing, curing, etc. and providing fixtures like fan clamps in the RCC floor/ roof slabs wherever necessary without claiming extra, etc., complete complying with standard specification and as directed by the departmental officers. The coarse and fine aggregates to be used should comply with the requirements of IS Standards. (No separate payment will be made by the Department for the excess usage of materials).
-
-
-
Foundation & Basement
302
-
-
In Ground floor
165
-
-
In First Floor
155
-
-
In Second Floor
36
-
-
Providing and laying in position, Standardised Concrete Mix M-20 Grade in accordance with IS:456-2000, using 20mm and down graded hard broken granite stone jelly for all RCC items of works with minimum cement content of 325 kg/mᶾ and maximum water cement ratio of 0.55, including admixture (plasticiser / super plasticiser) in recommended proportions as per IS:9103 to accelerate, retard setting of concrete, improve workability without impairing strength and durability with about (5 cu.m.) 7730 kg. of 20mm machine crushed stone jelly and with about (3.3 cu.m.) 5156 kg. of 10-12mm machine crushed stone jelly and with about (4.79 cu.m.) 7670 kg. of sand, but excluding cost of reinforcement grill and fabricating charges, centering and shuttering and also including laying, vibrating with mechanical vibrators, finishing, curing, etc. and providing fixtures like fan clamps in the RCC floor/ roof slabs wherever necessary without claiming extra, etc., complete complying with standard specification and as directed by the departmental officers. The coarse and fine aggregates to be used should comply with the requirements of IS Standards. (No separate payment will be made by the Department for the excess usage of materials).
-
-
-
Foundation & Basement
180
-
-
In Ground floor
4
-
-
In First Floor
9
-
-
Supplying, fabricating and placing in position Mild Steel / Ribbed Tor Steel grills for all RCC works as per design given including cost of steel and G.I. binding wire in all floors etc. complete complying with standard specification.(Contractor has to make his own arrangements for the supply of steel and binding wire)
995
-
-
Brick work in following Cement Mortar 1:5 (One cement and five sand) Fly Ash Bricks of 230 x 110 x 70mm size conforming to IS: 12894-1989 Class designation not less 50 kg./ sq.cm. average compressive strength in cement mortar 1:5 for load bearing structures for foundation and basement and for superstructure including curing, etc., complete complying with standard specifiction.
-
-
-
For foundation & basement
162
-
-
Brick work in following Cement Mortar 1:6 (One cement and six sand) Fly Ash Bricks of 230 x 110 x 70mm size conforming to IS: 12894-1989 Class designation not less 50 kg./ sq.cm. average compressive strength in cement mortar 1:5 for load bearing structures for foundation and basement and for superstructure including curing, etc., complete complying with standard specifiction.
-
-
-
In Ground floor
175
-
-
In First floor
145
-
-
In Second floor
50
-
-
Brick partition walls of 11cm thickness using Fly Ash Bricks of 230 x 110 x 70mm size in Cement Mortar 1:3 (One Cement and Three Sand) using hoop iron reinforcement if found necessary including curing etc. complete and as directed by the departmental officers. (Hoop iron reinforcement will be measured and paid for separately)
-
-
-
In Ground floor
165
-
-
In First Floor
145
-
-
Weathering course in brick jelly lime concrete using broken brick jelly of size 20mm uniform gauge in pure slaked lime (no sand to be used) to the proportion of brick jelly to lime being 32:12.5 by volume and laid over the RCC roof slab in a single layer of required slope and finished by beating the concrete with wooden beaters of approved pattern, keeping the surface constantly wet by sprinkling lime jaggery water, etc., complete as per standard specification and as directed by the deparmental officers.
75
-
-
Finishing the top of roof with one course of machine pressed tiles of size 230mm x 230mm x 20mm of approved quality set in Cement Mortar 1:3 (One Cement and Three Sand) 12mm thick mixed with water proofing compound conforming to ISS at 2% by weight of cement used and the joints pointed neatly to full depth of tiles with the same cement mortar mixed with red oxide and water proofing compound including curing etc., complete complying with standard specification and as directed by the departmental officers
765
-
-
Providing, mixing, laying polymer based water proofing treatment for the Sunken Toilet / Lift well / OHT Rcc wall by applying cement based, flexible, waterproofing compound confirming to IS:2645, to a thickness of 1mm of the prepared surface of the roof slab / floor slab as per specifications mentioned above providing cement mortar 1:3, waterproofing cover plaster to a thickness of 12mm over the membrane coating with admixture of approved make. Rate quoted is inclusive of preparation of surface, which includes cleaning of surface polymer mortar curing, labour, tools and equipment, etc. Rate inclusive of grouting with cement and sand required for the treatment, the cost and labour charges for fixing 25mm dia pressure pipes 15kg/cSq.m to a length of 45cm for drip pipes, etc. complete.
370
-
-
Brick jelly Lime Concrete of 1:2:5 (One Lime,Two Sand and Five Brick ielly ) with 40 mm hand broken brick ielly for Sunken portions including dewatering wherever necessary and laid in layers of not more than 15cm thick, well rammed, consolidated and curing etc. complete complying with standard specification.
47
-
-
Paving the floor with best approved quality fine polished Kota stone slabs of size 600 x 600 of 18 / 20mm with machine cut edges and matching marble slab not less than 100mm width other than Adanga Marbles as border laid over a cement mortar bed of 20mm thick using cement mortar 1:3 (One cement and three sand) fixing the slabs in true right angles with minimum possible width of joints and pointing the joints with white cement mixed with mathcing colouring pigments and polishing with floor polisher to a high degree of finish etc., The kota stone slabs and other materials to be used shall be got approved by the Executive Engineer concerned before use on work, etc., complete as per standard speicification.
73
-
-
Paving the floor with best approved quality fine polished Granite Stone Slabs of size 1200 x 600 of 18 / 20mm thick of Synthetic Grey, Paradise and similar varieties with machine cut edges laid over a cement mortar bed of 20mm thick using cement mortar 1:3 (One cement and three sand) fixing the slabs with required cement slurry and laid in true right angles with minimum possible width of joints and pointing the joints with white cement mixed with mathcing colouring pigments etc., The granite stone slabs and other materials to be used shall be got approved by the Executive Engineer concerned before use on work, etc., complete as per standard speicification.
425
-
-
Paving the floor with best approved quality Flamed Steel Grey Granite Slab 1200mm x 600mm, 16mm to 18mm Thick laid over a cement mortar bed of 20mm thick using cement mortar 1:3 (One cement and three sand) fixing the slabs with required cement slurry and laid in true right angles with minimum possible width of joints and pointing the joints with white cement mixed with mathcing colouring pigments etc., The granite stone slabs and other materials to be used shall be got approved by the Executive Engineer concerned before use on work, etc., complete as per standard speicification.
82
-
-
Paving the floor with best quality Double Charged Vitrified Tiles 600 x 600 x 8mm of approved colour, shade andquality laid in cement mortar 1:3 (one cement and three sand)20mm thick in all floors and the top pointed with the white cementmixed same colour pigments etc., complete complyinE withstandard specification. (The make and brand ofthe tiles should be Johnson / Kajaria / Somany / Nitco / RAK which has to be gotapproved by Executive Engineer before use on works)
700
-
-
Flooring with Self design Joint free rectified Ceramic Tiles of size 305 x 305 x 8mm laid over 20mm thick cement mortar 1:3 (Onecement and Tree sand) base mortar over the existing slab / floorincluding cutting the tiles to the required size with special cutterwherever necessary, laying in positionand and pointing with whitecement mixed with colouring pigment at the rate of 0.3 kg. / sq.m.etc., complete complying with standard specification. (The makeand brand of the tiles should be Johnson / Kajaria / Somany / Nitco/ RAK or Equivalent which has to be got approved by executiveEngineer before use on works)
180
-
-
Dadooing walls with Joint free rectified Colour designed digital print ceramic tiles, with borders, with size of 300mm x 600mm x 10mm and above setin Cement Mortar 1:2 (One Cement and Two sand) 20mm thick andpointing the joints with white cement mixed with colouring pigmentsat the rate of 0.40 Kg. / sq.m. nbatly in all floors, curing, etc,,complying with standard specification and as directed by thedepartmental officers. (The make and brand of the tiles should belike Johnson / Kajaria / Somany / Nitco / RAK or Equivalent whichhas to be got approved by Executive Engineer before use on works)
725
-
-
Supplying 18 to 20 mm thick white jet blck granite partition slab for urinals of 1200x600 (Avg) mm size fixing to wall using 3Nos.of suitable chromium plated brackets with CP bolt and nets, washers, cutting to required shape polishing to all the expose and surfaces and edge grinding etc;complete as directed by the dept officers.
6
-
-
Supplying and fixing fine polished cuddapah slab of following thickness for cup-board arrangements including laying to correct alignment with necessary cement mortar and black powder etc, complete complying with standard specification and as direct.
120
-
-
Providing Cup-board Shutter using termite / water proof plywood of 19mm thick over which laminated sheet of 0.8mm thick fixed inside the shutter and 1mm thick fixed in the outside of the shutter using fevicol along with necessary furniture
110
-
-
Providing grooving to granite slab at the intermediate edges of the vertical face with neat finishing etc complete with standard specification and as directed by the departmental officers. The cost including higher charges of machines and labour charges etc complete
300
-
-
Providing semi nosing to granite slab at the edges of the vertical space with neat finishing etc complete with standard specification and as directed by the departmental officers.The cost including higher charges of machines and labour charges etc complete
165
-
-
Providing and Fixing of PVC Trims (Corner beeding) at the outer corner profiles of the tiles including cost of material, labour and handling etc. as directed by departmental engineers at site of work and as per standard specification.
110
-
-
Plastering with Cement Mortar 1:5 (One cement and Five sand), 12mm thick in all floors including curing etc. complete complying with standard specification and as directed by the departmental officers.
3300
-
-
Special ceiling plastering and finishing the exposed surface of all RCC items of work such as slabs, beams, sunshades, facia, canopy slab, staircase waist slab, landing slab etc., with Cement Mortar 1:3 (One Cement and Three Sand) 10mm thick mixed with Bonding agent Cebex112, Zydex -Zycrete 2X or other Equalent compound conforming to BIS at 200ml of One cement bag (50kg) for increased workability and air entrainment used finishing including hacking the surfaces, providing cement mortar nosing, beading for sunshades, staircases, steps, landing slabs and curing, etc., in all floors complying with standard specification and as directed by the departmental officers
1860
-
-
Supplying and applying of two coats of putty of 3mm thick over the exposed RCC surface of ceiling including finishing the joints smoothly with grinding machine and the surface shall be thoroughly cleaned out of dust and scrubbing. The surface shall then be allowed to dry for atleast 48 hours. It shall then be sand papered (waterproof abrasive sheet) to give a smooth and even surface. Any unevenness shall be made good by applying 1st coat of putty mixed with water on the entire surface including filling up the undulations and applying 2nd coat of putty after 6 hours of 1st coat of putty and then sand papering (water proof abrasive sheet) the same after it is dry and finishing the surface smoothly, etc., complete complying with standard specifications and as directed by the Departmental Officers.The rates are inclusive of hire charges for grinding machine with wheel, cost of sand paper (water proof abrasive sheet), cost of putty blade, labour charges for grinding the joints and sand papering, two coats of putty, scrapping the putty area to level the surface smooth, etc.,complete. The putty should be got approved by the Executive Engineer before
3260
-
-
Providing the texture finish to the newly plastered wall with ready made texture putty with patterns at all levels including the cost of coating, labour charges and other incidental charges etc., complete as directed by the departmental officers
1400
-
-
Supplying and applying Putty with two coats of plastered wall surface of first class quality and of approved including thorough scrapping, clean removal of dirt wherever required etc., complete complying with standard specification.
1910
-
-
Painting two coats of newly plastered wall surface with ready mixed plastic emulsion paint of first class quality and of approved colour over a priming coat including thorough scrapping, clean removal of dirt, and including necessary plaster of paris putty, wherever required etc.,complete complying with standard specification.
6580
-
-
Supplying and fixing Teak Wood frames for doors Windows and Ventilators using required MS angles, flats and rods of approved design and as directed by the departmental officers including cost of MS Grills, labour charges and cost of one coat of red oxide primer with labour charges for priming coat etc. complete complying with standard specifiction.
-
-
-
T.W Scantling below 3m & above 2m
0.3
-
-
Supplying, hold fast of M.S flats of over all size of 330x50x6mm suitably folded to the required L shape have two end of lap of 50mm long each and overall length of the horizontal portion as 230mm & including making necessary grooves in two end laps to accomadate screws etc., complete.
10
-
-
Supplying and fixing in position of Teak wood door shutter using spl quality teak wood planks of 40 mm thick panelled doors with required raw materials, Brass hinges, Brass tower bolt, ornamental Brass handles, Door stopper, Door closer,Brass aldrops and bush with suitable locking arrangements etc. The rate should be inclusive of cost of materials, labour charges for wrought and put up the doors with kadasal charges and transporting charges etc complete complying with standard specification and as directed by the Departmental officers.
6.5
-
-
Providing Stainless Steel (Salem Stainless Steel) Door Frame (Box Section using Stainless Steel Plate of 1.6mm thick) of size 100mm x 60mm with a rebate of 30 / 35mm x 15mm on one side of the frame including supplying and fixing dovetail splayed end stainless steel hold fast etc., complete complying with standard specification and as directed by the Departmental officers.
173
-
-
Manufacturing, supplying and fixing of 35mm Solid Core Flush Shutters with teakply on both side with teakwook lipping alround 35mm thick and external lipping by TW around rebate cutting etc as per IS 2002 part I of 1991 including TW lipping of size 35 x 12 mm including labour charges for fixing all furniture fittings and specials. The flushshutters should be ISI specification and got approved by the Departmental officer before fixing with necessary beeding. etc complete as directed.
-
-
-
Single leaf
26
-
-
Double leaf
56
-
-
Polishing the teakwood panelled door with best melamine varnish finishing including labour charges for scrapping the existing T.W panelled throughly on both sides of the door, sand papering without affecting the teakwood plank grooves and natural design with preparation of surface using sand paper and finishing the smooth wooden surface and applying of melamine polishing on the teakwood panelled door/ partition surface using spray machine on uniform layer of smooth surface formed without any air bubbles after finishing the work etc., the rate inclusive of cost of materials ,labour charges ,transportion charges, labour for scrapping charges, etc complete complying with standard specification and as directed by the departmental officer (the materials quality are approved by the EE Before use of work.
235
-
-
Providing factory made pre-laminated FPVC (Formed Polyvinyl Chloride) Door Frame of the size 105x40mm with a wall thickness of 10mm made out of extruded rigid FPVC profile mitre joined with 6Nos. of 5mm long screw. The door frame shall be fixed to the wall by using 80mm long screws through the frame with the help of PVC fasteners of 3Nos. to be provided for each vertical member, GI stiffeners of ('U'channel of size 29x9,1mm, 150mmlong) -3Nos. at hinge point, frame reinforcement of ('U'GI channel of size 46x22x0.6mm), bottom tie rod of('U'GI channel size of 15x15x1mm),etc., complete complying with the standard specification. The door frame should be got approved from the Executive Engineer before use on work
146
-
-
Providing of 35mm thick factory made pre-laminated ABS (Acrolynitrile Butadiene Styrene) Door Shutter moulded in different designs, consisting of all round frame made out of water proof solid foam PVC bar of size 20 x 32mm, reinforced by 32 x 32mm -2 Nos., for vertical made out of LVL (Laminated Veneer Lumber), core material of 32mm thick high density craft paper honey comb board, sandwiched on both sides with pre-laminated ABS sheet thickness of 1.5mm.PVC edge banding of size 0.45mm on the vertical sides. Hardware made out of steel coated butterfly hinges -3 Nos., for each shutter and ISI make SS round lock complete for finished item of work, complete complying with the standard specification. The door shutter and frame should be got approved from the Executive Engineer before use on work
55
-
-
Supplying,fabricating and fixing in position of aluminium anodized natural colour matt finish door fully PLB Board 12 mm thick Sliding door using rectangular aluminium box section of sizes of frame section 101.60 x 44.45 x 3.18 mm @ 2.399 Kg./M Shutter Sections Top and Middle Section 50 x 44.45 x 2.50 mm @ 1.292 Kg./M, Bottom Section 100 x 44.45 x 2.50 mm @ 1.974 Kg./M, Vertical Style 50 x 44.45 x 2.50 mm @ 1.292 Kg./M with necessary accessories such as aluminium clips, handles,lock and sliding channel with wheel set including all materials, labour and power consumption charges required for fabrication if necessary clipping, dismantling materials necessary holes in RCC column beams or masonry wherever necessary with power drill to the extent required and made good to the original conditions after fixing etc. complete. The aluminium surface is to be anodized with matt finish under electrically controlled condition in accordance with ISI specification 1868/1962 of anodic film thickness of not less than 15 microns (Fifteen) for all sections. All the materials should be got approved by the Executive Engineer before fixing in position as directed
3
-
-
Providing, supplying & fixing of glazed 3 Track- 2 Panel Sliding Window With Mesh made out of multi chambered UPVC sections with TPV gaskets having isolated drainage and reinforced with Galvanized Iron of 120 GSM profiles through out the window. The sliding outer frame having a overall size of 108 x 45 mm with reinforcement of 1 mm thickness, super sash with overall size of 39 x 75 mm with reinforcement of 1.5 mm thickness, mesh sash of overall size 39 x 75 mm reinforced with 1.5 mm of GI.Glazing bead for fixing of glass shall be of size 20 x 18mm and coextruded with gasket. Composition of profile shall consists a minimum of 6 PHR of TiO₂ for every 100 parts of PVC resin. Fiber Glass mesh shall be provided in mesh shutter. Window/Door shall be provided with 6 mm plain float glass, standard hardware & single point locking system of Flush lock. Wall thickness of frame & sash shall be 2 - 2.2 mm.
72
-
-
Supplying and fixing UPVC (Un-Plasticized Polyvinyl Chloride) Louvered Ventilators of from the profile the size of outer frame 60mmx58mm and shutter profile size of 60 x 78mm both profiles are reinforced with GI/1mm 125GSM and 100% corrosion free, the profile are multi chambered sections with wall thick of 2mm. The EPDM rubber (black colour) covered with all over the edges of frame and shutter. The corners and joints should be welded and cleaned. Radiations pin headed glass 4mm thick should be provided in the louvers. The window should be fixed to the wall with 100% packing with screws and silicon packing all round the frames.The ventilator should be got approved from the Executive Engineer before use on work
15
-
-
Manufacturing, supplying and fixing of Steel Door with following specification.MS angle of size 40 x 40 x 6mm at 3.5 kg. / m used for outer frame and MS Angle of size 35 x 35 x 5mm at 2.6 kg. / m for the shutter frame. Stiffeners with 32 x 6mm at 1.5 kg. / m MS Flat is provided as the lock rail of the door and welded intact on both ends to the shutter frame. 18G CR Sheets of best quality is laid as panel in the shutter frames. 18 x 5mm at 0.70 kg. / m MS Flat is welded over the 32 x 6mm at 1.50 Kg. / m MS Flat on the rear side of the door, sandwitching the CR Sheet for rigidity. Additional stiffeners with 18 x 5mm at 0.7 Kg. / m MS Flats are provided diagonally on the rear side of the shutter. 300mm length of hinges 2 Nos. for shtter is provided. 6 Nos. of 200mm length hold fasts specified at the ends are welded to the outer frame of the door.Tower bolt 2 Nos. at the top provided. 250 x 16mm size of two aldrops are provided in single leaf door at lock rail section in the door for inner and outer provided and one rotating locking arrangements for the inner side of the door and additional provision for locking arrangements for lock is provided on the rear sideof the door at an appropriate place and 1 No. of MS handle of heavy duty. A tie bar is provided at the bottom of the outer frame to prevent twisting of the frame during transportation and fixing. All members are given one coat of red oxide primer as directed by the departmental officers. The rate includes cost of all materials, labour charges, transportation, taxes and all other incidental charges, etc., complete, complying with standard specifications. (Single Leaf)
2.5
-
-
Supplying and fixing of M.S. grill of approved design for open courtyard, grill, grill work to doors and window openings etc., using necessary mild steel flats for inner and outer members which should be fixed on edges including cutting the members, welding, grinding, one coat of priming coat using best approved quality red oxide primer, dismantling of walls / concrete if necessary, fixing and finishing the dismantled portion to original condition etc., complete complying with standard specification.
6620
-
-
Painting new iron works such as steel doors, windows, ventilators, window bars, balustrades etc., with two coats of best approved first quality and colour of synthetic enamel paint over the existing red oxide priming coat in all floors excluding cost of priming coat etc., complete complying with standard specification. (The make, quality and colour of paint should be got approved by the Executive Engineer before use on works.)
205
-
-
Manufacturing, Supplying and Fixing of Stainless Steel Hand rails for staircase using 50mm dia 304L Grade Stainless Steel pipe of 1.60mm thick at required locations to a height of 900mm from finished floor level welded to 38mm dia Stainless Steel pipe post of 1.00mm thick as vertical at 900mm centre with 2 Nos. of 25mm dia intermediate horizontal stainless steel pipe of 1.60mm thick in between.The vertical pipe has to be welded to the 100 X 100 X 6mm MS base plate encased in the base concrete. The rate is inclusive of the charges for cutting, bending, welding, grinding, polishing, conveyance, electrical charges, etc.complete
50
-
-
Manufacturing, Supplying and Fixing of Stainless Steel Hand rails for staircase near wet riser using 50mm dia 304L Grade Stainless Steel pipe of 1.60mm thick will be provided with tubular supports made of 304L Grade Stainless Steel pipe of 25mm dia of 1.60mm thick welded to the railing. The supports will be grouted into the wall and provided with 93.00mm thick Stainless Steel circular base plate of 304 Grade. The rate shall included for grouting into concrete with necessary supporting arrangements the hand rail in floor polishing buffing, bonding, cutting, grinding, conveyance, welding charges, electrical charges, etc. complete
30
-
-
Manufacturing,supplying and fixing of stainless steel of U shaped movable grab bar with hinges for accessible toilet using 50 mm dia pipe of 304 grade stainless steel pipe of 1.60 mm thick in required size of 750mm x 110mm.The rate is inclusive of the charges for cutting ,bending ,welding, grinding, polishing, conveyance, electrical charges, etc., complete.
2
-
-
Manufacturing,supplying and fixing of stainless steel grab bar for accessible toilet using 50 mm dia of 304 grade stainless steel pipe of 1.60 mm thick in required size of 600mm long .The rate is inclusive of the charges for cutting ,bending ,welding, grinding, polishing, conveyance, electrical charges,etc.,complete.
1
-
-
Manufacturing,supplying and fixing of stainless steel L shaped grab bar for accessible toilet using 50 mm dia of 304 grade stainless steel pipe of 1.60 mm thick in required size of 500mm and 700mm long .The rate is inclusive of the charges for cutting ,bending ,welding, grinding, polishing, conveyance, electrical charges,etc.,complete.
1
-
-
Supplying and fixing in position best approved of BIS quality PVC rain water down fall pipes having a pressure of 4 kg/sq.cm including cost of necessry PVC shoe, PVC bend, cast iron gratings of required diameter and special clamps, brass screws, nails, etc., and fixing of cast iron gratings at junction of parapet and the RCC roof slab including finishing neatly etc., complete. The rate shall be inclusive of cast of removable cast iron grating. The PVC pipe shall be fixed in wall with special type of "U" clamp at the centre of the pipe line in addition to those for more than 3 metre pipe length, etc., complete complying with standard specification.
-
-
-
160 mm dia
80
-
-
110 mm dia
8
-
-
Providing Anti-termite treatment to soil adjecent and under building foundation, plinth periphery of the building by application of chemicals of IS 6313 Part I to IV in stages to suit the progress of work consist as per the detailed specification as below. (Measurements taken for the plinth area for the purpose of payment) including breaking of termite mounds, making holes with crow bar, closing the holes after the treatment and including cost of chemicals, labour charges, transport and storing, etc,complete and as directed by the departmental officers. (The chemical should be got approved by Executive Engineer before use on work).
690
-
-
Stage-1: Spraying anti-termite chemical solution for the foundation before laying concrete, in bottom and sides of foundation.Stage-2:Spraying anti-termite chemical solution to the grade beam level, spraying has to done for the grade beam, brick masonry contact with the back fill earth. Stage-3: Spraying anti-termite chemical solution on the sand for the flooring before laying the flooring concrete. This treatment has to be carried out on the sand filling by making holes with crow bar to a depth of 60cms and at 60cms intervals on both direction and at junction of wall and flooring thoroughout.Stage-4: Spraying anti-termite chemical solution alround building outside by making holes through bar before laying plinth protection and the holes to be closed after the treatment
-
-
-
Supplying and Laying Rubber Moulded paverblock of 60-63mm thick with new one using cement concrete 1:2:4 for manufacturing, finishing, Curing and conveyence to site and laying etc., complete complying with standard specification and as directed by the deparmental officers.
320
-
-
Supply and fixing of stored pressure ABC (Mono Ammonium Phospate) Powder Type Fire Extinguisher of 6 kg. capacity as per IS:15683 with pressure gauge, discharge hose & control nozzle, wall mounting bracket, safety clip etc., including conveyance, all incidental charges, neccessary scaffolding and re-doing the dismantled portions to its original condition wherever found neccessary etc, complete as per standard specification and as directed by the Departmental Officers. Make: EXCELLENT / SAFETY FIRST / EQUIVALENT
20
-
-
Drilling of bore wells 150 mm dia any where in Chennai city including transportation from the place with in the above district in alluvial soil sedimentary strata of clay and sand stone shale pebbles boulders etc by first taking pilot of 140mm/ 150mm/200mm dia and the enlarging to required dia by direct or revise rotary mud circulation method using contractor's rig fuel labour drilling betonies mud and water required for the drilling at the site shown by the departmental officers including construction of mud pit (Water available with in a lead of 1.5 Km) Drilling of 140/150/ 200mm pilot bore.
40
-
-
Reaming from 140 / 200mm dia pilot bore to 300mm dia bore as directed by the departmental officers upto 6M depth ending below Ground level
40
-
-
Supplying of 160 mm Dia Slotted PVC pipes of 6kg/cSq.m (With slot or without slot) in the drilled hole including welding the joints etc., complete supplying and packing the annular space with pebbles size and quality as approved by the EE
22
-
-
Supplying of 160 mm Dia Plain PVC pipes of 6kg/cSq.m (With slot or without slot) in the drilled hole including welding the joints etc., complete supplying and packing the annular space with pebbles size and quality as approved by the EE
22
-
-
Labour charges for inserting 165 /168 mm dia PVC casing pipes assemble (with slots or without slots) in the drilled hole including jointing the pipes with PVC coupler and with cement paste etc. complete and supplying and packing the annular space with pebbles of size and qualityas approved by the departmental officers. The conveyance charges to work site to be borne by the contractor.
32
-
-
Charges for developing the bore well for entire depth with suitable air compressor of 300RPM capacity (minimum 8 hrs) including transportation labour and fuel charges for compressor and directed by the departmental officers and conducting yield test by "V" notch methods, excluding the cost of bore charges and conveyance charges of handle boring.
16
-
-
Supplying laying and jointing HDPE pipes of 10kg/cSq.m for borewell motor purpose of approved quality etc., complete and as directed by the departmental officers.
-
-
-
40mm Dia
44
-
-
25mm Dia
44
-
-
Supplying and fixing of 3 HP of approved brand Submersible Pump with accessories of starter, Main switch, panel board etc. complete to suit the need (The pump set should be got approved by the Executive Engineer before supply)
2
-
-
Supplying and fixing of 5.00 HP of approved brand monoblock with accessories of starter, Main switch, panel board etc. complete to suit the need (The pump set should be got approved by the Executive Engineer before supply)
2
-
-
Supplying and fixing and connecting of 4 core 16 sq.mm Flat Sub mersible cable wire for the sub-mersible motor from panel board to sub-mersible pump.
120
-
-
Supplying and fixing and connecting of 3 phase DOL 1 HP Starter with Panel board etc., complete.
4
-
-
Supplying and fixing of 20mm dia Nylon rope for submersible motor of approved quality in etc,complete complying with standard specifications.
60
-
-
Supplying and fixing in position first quality and approved variety of Gun metal Gate Valve / Wheel Valve with BIS make of the following dia including cost of shellac, thread balls, etc., complete complying with standard specifications (for both internal and external water supply arrangements). The valves to be used on work shall be got approved by the Executive Engineer before use on work.
-
-
-
25 mm dia G.M. Gate Valve
27
-
-
32mm dia G.M. Gate Valve
7
-
-
40 mm dia G.M. Gate Valve
6
-
-
50 mm dia G.M. Gate Valve
3
-
-
Supplying and fixing in position 15mm dia following taps (heavy duty) of approved make conforming to BIS specifications and quality including cost of shellac, thread, etc., complete complying with standard specification and including cutting and threading wherever necessary.(Taps should be got approved by the Executive Engineer before use on the works)
-
-
-
Long body tap
22
-
-
Stop Cock
22
-
-
Swan Neck Tap
6
-
-
Supplying and fixing in position 15mm dia twoway bibcock (heavy duty) with Health faucet of approved make conforming to BIS specifications and quality including cost of shellac, thread, etc., complete complying with standard specification and including cutting and threading wherever necessary. (Taps should be got approved by the Executive Engineer before use on the works)
10
-
-
Supplying and fixing in position CP shower rose with CP stop cock arrangement of size 15mm dia inlet and 100mm outlet to the pipe line with necessary cutting, threading and jointing using shellac etc., complete complying with standard specification and as directed by the departmental officers (The CP shower rose should be got approved by the Executive Engineer before use on works).
10
-
-
Supplying and fixing in position Indian make bevelled edge mirror of approved quality and brand PVC / Fibre Glass framed 600 x 450 x 5.5mm thick mirror, shelf type with hard board backing of approved colour fixed with brass screws, rawl plug, etc., complete complying with standard specification. (The mirror should be got approved by the Executive Engineer before use on woks)
12
-
-
Supplying and fixing approved best quality brass CP towel rail 600mm long and 20mm dia with brackets of same materials including cost of teak wood plugs and CP screws, etc., complete complying with standard specifications. (The tower rail should be got approved by Executive Engineer before use on works).
22
-
-
Supplying and fixing best approved best quality brass CP soap tray of size 150 x 150mm including cost of teak wood plugs, brass screws, etc., complete complying with standard specifications. (The soap tray should be got approved by Executive Engineer before use on works).
22
-
-
Supplying and fixing CP Bottle Trap including cost of all materials, labour etc., complete as directed by the departmental officers.
24
-
-
Supplying and fixing in position best quality and approved make Indian made white glazed earthernware wash hand basin of size 550 x 400mm (without pedestal) with a pair of cast iron brackets, including cost 15mm dia brass CP pillar tap, 32mm dia "B" class GI waste pipe with rubber plug and chain, 15mm dia GM wheel valve, 15mm brass nipple, 15mm dia nylone connection, 32mm dia CP brass waste coupling including fixing of wash basin using CI brackets on to the wall in position with TW plugs and screws, rubber washers, white lead and giving necessary water supply connection and painting the brackets with two coat of painting over a priming coat of anti-corrosive paint including testing for leakages etc., complete complying with standard specification and as directed by the departmental officers. (The wash hand basin and specials should be got approved by the Executive Engineer before use on works).
15
-
-
Supply and fixing in position of best Indian make white glazed earthernware lipped mouth flat back urinal of best quality and approved make of size 430mm x 260mm x 350mm with GI pipe, 32mm dia bell mouth PVC connection and waste pipe, 15mm dia GI pipe of required length, 15mm dia GM wheel valve, 15mm dia brass nipple 2 Nos., and fixing the urinals in position with necessary TW plugs, clamps, screws, etc., including dismantling masnory and re-doing the same to the original condition, etc., including painting the pipe with two coats of best quality approved synthetic enamel paint over one coat of red oxide primer and checked without any leakage etc. complete complying with standard specifications and as directed by the departmental officers. (The urinal should be got approved by the Executive Engineer before use on works.)
4
-
-
Supplying and fixing in positon Indian Water Closet (Oriya type) of size 580 x 440mm white glazed earthern ware with Twin type PVC flush tank of approved quality and brand with "P" or "S" trap conforming to BIS with sand cushion and forming flooring alround the closet using 40mm broken brick jelly in lime concrete 1:2:5 (One lime, Two sand and Five brick jelly) 100mm thick and finishing the top to the required slope and including giving necessary connection to PVC pipes (including the cost of 110mm dia PVC pipe for a length of 600mm) by dismantling brick masonry wall / reinforced cement concrete roof / floor slab and making good the dismantled portion to the original condition with leakages etc., complete complying with standard specifications and as directed by the departmental officers. (The water closet should be got approved by the Executive Engineer before use on works).
5
-
-
Supplying and fixing in position White / Colour Glazed Model Floor Mounted European Water Closet of best quality and approved make with 100mm “P” or “S” trap connecting with CI pipe of 100mm dia / PVC pipe of 110mm dia, double flapped rigid PVC black seat and seat cover with CP brass hinges including cost of white cement, cement for packing, spun yarn, teak wood plugs, brass screws, etc., including supplying and fixing 10 litres capacity PVC / 12.5 litres capacity porcelin low level flushing tank with a pair of CI brackets, etc., complete with all fittings, such as, 15mm brass ball valve with polythene float with brass handle, union coupling connected by means of 40mm white PVC flush hand using indian adopter joint including all internal fittings, such as, 15mm bras connections, 15mm GM wheel valve, 15mm brass nipple (2 Nos.), 15mm nylon connection, TW plugs, screws and also giving necessary connection to the PVC pipe and painting the CI brackets with 2 coats of approved paint over one coat of red oxide primer, dismantling the masonry and re-doing the dismantled masonry to original condition, etc., complete complying with standard specifications. (The EWC and flushing tank with all accessories should be got approved by the Executive Engineer before use on works) Floor Fitting
10
-
-
Supplying and fixing position CI Nahani Trap / Floor Trap of the following sizes with best stainless steel gratings of approved brand and quality, fixed over a bed of brick jelly lime concrete 1:2:5 (One part of lime, two part of sand and five part of 40mm gauge brick jelly) and finished with Cement Mortar 1:3 (One Cement, Three sand) including dismantling masonry works wherever found necessary and making good the dismantled portions to the original condition and giving connection to the CI / PVC pipes, etc., complete complying with standard specification. (The Nahani Trap should be got approved by the Executive Engineer before use on works)
-
-
-
Nahani Trap of size 100 x 75mm
50
-
-
Supplying and fixing in position 150 x 100mm "P" or "S" stoneware gully trap 'A' grade with CI double gratings of size 150 x 150mm and 230 x 230mm at bottom and top respectively with necessary earth work excavation laid over a bed of brick jelly cement concrete 1:3:6 (One cement, Three sand and Six broken brick jelly) 150mm thick using 40mm size broken brick jelly including necessary brick work and plastering including dismantling masonry wherever necessary and re-doing the damaged portions to the original conditions using cement concrete 1:3:6 using 20mm stone jelly for fixing the gully trap and giving connections to stoneware sewer line etc., complete complying with standard specifications. [Earth work excavation, brick work, plastering shall be measured and paid separately]. The stoneware gully trap should be got approved by the Executive Engineer before use on works.
8
-
-
Supplying and fixing in position best quality PVC soil / waste pipes of various dia having 6 kg / sq.cm. pressure BIS mark and providing leak proof joints using PVC adhesives including fixing to the wall with special PVC / MS clamp, teak wood plugs, brass screws, etc., and making connection to all sanitary fittings, dismantling masonry / RCC works wherever found necessary and making the good dismantled portion to the original condition, including testing for any leakages, etc., complete complying with standard specifications.(The PVC pipes should be got approved by the Executive Engineer before use on works).
-
-
-
75mm dia
100
-
-
110mm dia
60
-
-
160mm dia
110
-
-
Supplying and fixing in position PVC specials of the following dia and types of approved quality confirming to BIS and providing leak proof joints including fixing to the walls and giving connection to the PVC soil stacks, dismantling the masonry or RCC works and re-doing the dismantled portion to original condition etc., complete complying with standard specifications. (The PVC specials should be got approved by the Executive Engineer before use on works).
-
-
-
PVC Elbow
-
-
-
110mm dia
30
-
-
75mm dia
50
-
-
PVC Elbow with Door
-
-
-
110mm dia
20
-
-
75mm dia
30
-
-
PVC Tee
-
-
-
110mm dia
20
-
-
75mm dia
30
-
-
PVC Tee with Single Door
-
-
-
110mm dia
20
-
-
75mm dia
30
-
-
PVC Y
-
-
-
110mm dia
20
-
-
75mm dia
30
-
-
PVC "Y" with Single Door
-
-
-
110mm dia
20
-
-
75mm dia
30
-
-
PVC bend
-
-
-
110mm dia
20
-
-
75mm dia
30
-
-
Supplying and fixing in position PVC cowls of following dia of best approved quality conforming to BIS, etc., complete complying with standard specifications.(The PVC cowl should be got approved by the Executive Engineer before use on works)
-
-
-
110 mm dia
8
-
-
75 mm dia
10
-
-
Supplying, laying and jointing UPVC pipes of approved quality and best variety conforming to BIS of the following dia including cutting, threading and fixing UPVC specials using UPVC adhesives (but excluding cost of such specials) and fixing into wall with teak wood plugs, SS clamps and screws making holes on the wall (or) drilling holes in the roof and making good the dismantled portion to original condition with necessary brick work / cement concrete and plastering neatly wherever necessary with necessary scaffolding charges upto 4 metre height above ground level, etc., complete complying with standard specifications. The UPVC pipes shall be got approved by Executive Engineer before use on works.
-
-
-
15 mm dia
66
-
-
20 mm dia
260
-
-
25 mm dia
300
-
-
32 mm dia
68
-
-
40 mm dia
130
-
-
50 mm dia
100
-
-
Supplying UPVC Specials in water supply arrangements (both in internal and external water supply arrangements
-
-
-
UPVC Elbow
-
-
-
50 mm dia
20
-
-
40 mm dia
20
-
-
32mm dia
40
-
-
25 mm dia
50
-
-
20 mm dia
80
-
-
UPVC Tee
-
-
-
50 mm dia
20
-
-
40 mm dia
20
-
-
32mm dia
40
-
-
25 mm dia
50
-
-
20 mm dia
80
-
-
UPVC Reducer
-
-
-
50x40mm dia
20
-
-
40x32mm dia
20
-
-
32x25mm dia
40
-
-
25 x 20 mm dia
50
-
-
20 x 15 mm dia
80
-
-
UPVC Reducer Elbow
-
-
-
50x40mm dia
20
-
-
40x32mm dia
20
-
-
32x25mm dia
40
-
-
25 x 20 mm dia
50
-
-
20 x 15 mm dia
80
-
-
UPVC Reducer Tee
-
-
-
50x40mm dia
20
-
-
40x32mm dia
10
-
-
32x25mm dia
20
-
-
25 x 20 mm dia
40
-
-
20 x 15 mm dia
30
-
-
UPVC Hex Nipple
-
-
-
50 mm dia
20
-
-
40 mm dia
10
-
-
32mm dia
20
-
-
25 mm dia
30
-
-
UPVC Union
-
-
-
50 mm dia
20
-
-
40 mm dia
10
-
-
32mm dia
20
-
-
25 mm dia
30
-
-
UPVC Coupler
-
-
-
50 mm dia
20
-
-
40 mm dia
10
-
-
32mm dia
20
-
-
25 mm dia
30
-
-
Supplying, laying and jointing CPVC pipes (having working pressure 10 kg. / sq.cm) of approved quality and best variety conforming to BIS of the following dia including cutting, threading and fixing UPVC specials using CPVC adhesives (but excluding cost of such specials) and fixing into wall with teak wood plugs, CPVC clamps and screws making holes on the wall (or) drilling holes in the roof and making good the dismantled portion to original condition with necessary brick work / cement concrete and plastering neatly wherever necessary with necessary scaffolding charges, etc., complete complying with standard specifications. The CPVC pipes shall be got approved by Executive Engineer before use on works.
-
-
-
20 mm dia
65
-
-
Supplying CPVC Specials in water supply arrangements (both in internal and external water supply arrangements
-
-
-
CPVC Elbow
-
-
-
20 mm dia
20
-
-
CPVC Tee
-
-
-
20 mm dia
20
-
-
UPVC Coupling
-
-
-
20 mm dia
20
-
-
Construction of Inspection chamber or manhole of the following size including necessary earth work excavation in all soils to full depth as may be directed with sand filling at bottom of the chamber for 10cm thick, concreting CC 1:5:10 using 40 mm guage HBGs jelly 10 cm thick and sode walls 9" thick brick work in cement mortar 1:5 using Fly Ash Bricks of 230 x 110 x 70mm filling the size of foundation with excavated earth, plastering with cm 1:3 20m thick for inside and bottom and making necessary benching with brick jelly cement concrete to the required slope and finishing neatly etc., complete.
-
-
-
0.60 x 0.60 x 0.60m
6
-
-
0.60 x 0.60 x 0.90m
6
-
-
0.75 x 0.75 x 1.20m
4
-
-
0.75 x 0.75 x 1.50m
4
-
-
Supplying and fixing in position of Steel fibre reinforced cement concrete (SFRC)manhole / inspection chamber cover slab with following frame sizes including necessary labour charges for fixing the frame in position over the cement mortar base and finishing the joints etc. complete as directed.
-
-
-
600x600mm cover slab
16
-
-
750x750mm cover slab
8
-
-
Providing rain water harvesting pit of 1.50m dia and 1.50m depth with necessary earth work excavation,erecting the five nos of Rcc collar of 1.50m dia,sand filling of 0.60m depth, filling of 40mm HBS Jelly of 0.60m depth and covering with Rcc cover slab of 50mm thick and also connecting 110mm dia PVC pipe of 10m legth including transporting charges, fixing,etc complete.
8
-
-
Supplying and fixing of PVC mould CI Steps of approved quality including dismantling masonry wherever necessary and redoing the da maged portion to original condition
44
-
-
Supplying and fixing eight person dinning table with tilton stool of size 94"36"30", stool height 18" S.S top of 16 gauge sheet 304 grade with leg in 1 ½” S.S. pipe with adjustable nylon bullet leg, cross bracing in 1” S.S. pipe, stool leg in 1 ½” S.S. pipe and stool top in 22 SWG S.S. sheet etc complete., and as directed by the departmental officers.
4
-
-
Supply and fixing Two in one gas Range size 48"x24"x24" The unit’s top fabricated out of 16 SWG 304 grade S.S. sheet, 3 side covering in 20 SWG 304 grade S.S. sheet and front panel in 18 SWG 304 grade S.S. sheet. The unit mounted on 1 ½” X 16 SWG 304 grade S.S. pipe with adjustable nylon bullet leg. The unit 1 no. T-35 burner with complete accessories etc., and as directed by the departmental officers.
1
-
-
Supply and fixing Single gas Range size 24"x24"x24" The unit’s top fabricated out of 16 SWG 304 grade S.S. sheet, 3 side covering in 20 SWG 304 grade S.S. sheet and front panel in 18 SWG 304 grade S.S. sheet. The unit mounted on 1 ½” X 16 SWG 304 grade S.S. pipe with adjustable nylon bullet leg. The unit 1 no. T-35 burner with complete accessories etc., and as directed by the departmental officers.
2
-
-
Providing and fixing TATA MS Gas 12mm pipe line with required T & L joint, Installation consist of Cylinder Manifold,5Numbers NRV(Non Return Valve, 5Numbers 90cm Black hose, 5Numbers TVL Adapter, 1 Number Valve, 2 Numbers Main line Valve, 4 Numbers NCL (Needle Control Valve) 4 Numbers Black hose 120cm each & 1 Number 2’ CPT Copper etc complete., and as directed by the departmental officers.
20
-
-
Supply and fixing Two Number HOOD Size 72"x36"x21" and 48’’36”21” 520mm Diameter, Blade16 Numbers, LL Series, Centerfucial Blower unit with 2hp 1440RPM 3Phase Crompton motor, Hood Made out of 20 SWG 202 grade SS sheet with Baffle Filter,1 lot GI Ducting made out of 22 SWG GI sheet 30 feet Length and starter etc., and as directed by the departmental officers.
1
-
-
Supply and fixing Commercial Fridge Frost free two Door Fridge 500 liters Capacity made out of SS 202 grade with four adjustable Shelves,The unit will be supported with Emerson Popeland Compressor with Adjustable temperature controller with lowest 3 degree celcius etc., and as directed by the departmental officers.
1
-
-
Supply and fixing Two in one sink with splash back of Size 48” X 24” X 34” + 6” The unit’s top and sink fabricated out of 16 SWG 304 grade SS sheet. The unit mounted on 304 grade SS pipe with adjustable nylon bullet leg. The size of the sink is 18” X 18” X 12”. etc., and as directed by the departmental officers.
3
-
-
Supply and fixing Working table with 2 U/S size 32” X 24” X 34” TThe unit’s top fabricated out of 16 SWG 304 grade SS sheet and 2 under shelf in 18 SWG 304 grade SS sheet. The unit mounted on heavy duty SS pipe with adjustable nylon bullet leg etc., and as directed by the departmental officers.
2
-
-
Providing luggage trolley of size 3'x2'x3'10" of 28kg weight made of heavy duty stainless tube, carpeted deck, full wrap around bumber, four wheels etc., The rate is including the cost of fittings, Cost of screws, nails , conveyance charges etc.,complete as directed by the departmental officers.complete complying with standard specification.
2
-
-
Supply and fixing S.S.Wet Grinder Box type 7 litres capacity etc.,complete and as directed by the departmental officers.
1
-
-
Supply and fixing Mixie ISI make etc.,complete and as directed by the departmental officers.
1
-
-
Supply and fixing Dosa plate of Size 4’ X 2 ’ X 34” + 6” The frame work of the unit is fabricated out heavy duty M.S. angle. The top of the unit is provided with 18mm thick M.S. plate. Necessary fall ceiling provided for keeping 2 nos. “V” burner with all accessories. Three sided 6” splash back fabricated out of 16 SWG 304 grade S.S. sheet. Front paneling in 18 SWG 304 grade S.S. sheet provided with quality glass wool insulation to avoid heat radiation. The unit mounted on 1 ½” X 16 SWG 304 grade S.S. pipe with adjustable nylon bullet leg etc., and as directed by the departmental officers.
1
-
-
Supply of Rice Cooker of 15kg capacity etc.,complete and as directed by the departmental officers.
1
-
-
Supply of Milk Cooker of 30 Litre capacity etc.,complete and as directed by the departmental officers.
1
-
-
Supply of Idly Cooker of 100 Idlys capacity etc.,complete and as directed by the departmental officers.
1
-
-
Supply of S.S.meals plate ISI make etc.,complete and as directed by the departmental officers.
75
-
-
Supply of S.S.Tiffen plate ISI make etc.,complete and as directed by the departmental officers.
75
-
-
Supply of S.S.Spoon ISI make etc.,complete and as directed by the departmental officers.
75
-
-
Supply of S.S.Tumbler ISI make etc.,complete and as directed by the departmental officers.
75
-
-
Supply of Cup & saucer etc.,complete and as directed by the departmental officers.
75
-
-
Supply of Service tray etc.,complete and as directed by the departmental officers.
15
-
-
Supply of Water jug etc.,complete and as directed by the departmental officers.
10
-
-
Supply of Aluminium vessels etc., complete and as directed by the departmental officers.
1
-
-
Supply of S.S vessels & iron kadai/ pan etc., complete and as directed by the departmental officers.
1
-
-
GST at 18%
1
-
-
Evaluation Notes How It Works ?
Potential Partner
Select Your Requirements