Municipal Administration And Water Supply Department Tender

Providing and laying, spreading and compacting graded stone aggregate to Wet mix macadam (WMM) specification including premixing the material with water at OMC in mechanical mix plant carriage to mixed material by tipper to site laying in uniform layers with paver in sub base / base course on well prepared surface and compacting with vibratory roller to achive the desired density complete as per clasue 406 of MORTH specifications.

Providing and laying Prime coat of 7 kgs/10 sqm over the WMM surface treated with primer using 7 kgs of bituminous Emulsion (SS) for 10square meter area including cost of bituminous binder, including labour charges for applying the required quantity of bituminous binder as Prime coat manually etc., complete as per 502 of MORTH Rev-5 Specifications

Providing and laying tack coat of 2.5 kgs/10 sqm over the WMM surface treated with binder using 2.5 kgs of bituminous Emulsion (RS) for 10square meter area including cost of bituminous binder, including labour charges for applying the required quantity of bituminous binder as tack coat manually etc., complete as per 503 of MORTH Rev-5 Specifications

Providing and laying of 50mm compacted bituminous macadam using 0.42m3 of 26.5-11.2mm graded metal and 0.10 m3 of 11.2 to 2.8mm graded metal and 0.18 m3 of 2.8mm and below with 38 kgs of bitumen of grade 80/100 for premixing per 10 m2 including cost and conveyance of all materials to CMP site heating the bitumen and aggregates to required temperature and mixing them in required in central hot mix plant 20-30 tonnes capcity conveying the mix by tipper trucks to power site spreading the mix in required temperature for uniform thickness of 50mm with mechancial paver to the specified grades and cross section and compaction by 80-100 KN power roller to the required density etc., including labour for loading bitumen into bitumen tank and metal to feeder unit, labour for attending to paver site etc., including hire chrages and fuel charges for 20-30 T CMP with two bitumen boiler, tipper trucks, power finisher power rollers and all other tools and plant required including all other incidental charges etc., completed as per specification using cmp clause 504 of MOST specification.

Providing and laying of 25mm compacted thick Semidence Bituminous Concrete using 0.10m3 of 11.2mm IRC metal/ 0.16m3 of 6.7mm IRC metal and 0.11 m3 of 2.8mm and below with 24 kgs of bitumen of grade 60/70 for premixing per 10 m2 including cost and conveyance of all materials to CMP site, heating the bitumen and aggregates to required temperature and mixing them in required temperature in central hot mix plant 20-30 tonnes capacity conveying the mix by tipper trucks to power site spreading the mix in required temperature for uniform thickness of 25mm with mechancial paver to the specified grades and cross section and compaction by 80-100 KN power roller to the required density etc., including labour for loading bitumen into bitumen tank and metal to feeder unit, labour for attending to paver site etc., including hire chrages and fuel charges for 20-30 T CMP with bitumen boiler, tipper trucks, power finisher power rollers and all another tools and plant required including all other incidental charges etc., completed as per specification using cmp clause 511 of MOST specification.

Add :- GST @ 18%