Municipal Administration And Water Supply Department Tender

Painting the Old Iron works one coat with synthetic Enamel paint of approved quality and colour including ordinary scraping using brushed and neat finishing etc., complete complying with standard specification and as directed by the Depadrtmental Officedr (the colour and quality should be got approved by the Executive Engineer before use)

Paving the floor with Double charged Vitrified tiles of approved quality and colour of size 600x600x8mm thick of approved make, quality and colour in all floors over a base layer of cement mortar 1:3 (One part of Cement and Three part of Plastering Sand (P- Sand)), 20mm thick and laid straight alignment and pointed neatly with colour cement at the rate of 0.40kg/m2 laid without any air gap in the tiles neatly and fixing in position as per standard specifications and as directed by the departmental officer. The colour & quality of tiles should be got approved by Municipal Engineer before use on work

Supply and installation of Air-Conditioner with copper coil 2.0 TR Split Type AC Unit - 5 star Rated including cost and conveyance of all materials, labour charges and all other incidential charges etc., complete as per standard specifications and as directed by the departmental officers. (M-1985)

Supply and installation of 5 KVA capacity Automatic Voltage Stabilizer with time delay relay including cost and conveyance of all materials, labour charges and all other incidential charges etc., complete as per standard specifications and as directed by the departmental officers. (M-1989)

Supply and fixing of MS stand for fixing outdoor unit including cost and conveyance of all materials, labour charges and all other incidential charges etc., complete as per standard specifications and as directed by the departmental officers. (M1991)

Supply and fixing of 1000W automatic electric water heater of 25 litres capacity suitable for 230V 50 c/s AC supply on suitable MS clamps with 3 core flex wire,but without plumbing work (SD 103)

Supplying and fixing in position White / Colour Glazed Model Floor Mounted European Water Closet of best quality and approved make with 100mm “P” or “S” trap connecting with CI pipe of 100mm dia / PVC pipe of 110mm dia, double flapped rigid PVC black seat and seat cover with CP brass hinges including cost of white cement, cement for packing, spun yarn, teak wood plugs, brass screws, etc., including supplying and fixing 10 liters capacity PVC / 12.5 liters capacity porcelain low level flushing tank with a pair of CI brackets, etc., complete with all fittings, such as, 15mm brass ball valve with polythene float with brass handle, union coupling connected by means of 40mm white PVC flush hand using Indian adopter joint including all internal fittings, such as, 15mm bras connections, 15mm GM wheel valve, 15mm brass nipple (2 Nos.), 15mm nylon connection, TW plugs, screws and also giving necessary connection to the PVC pipe and painting the CI brackets with 2 coats of approved paint over one coat of red oxide primer, dismantling the masonry and re-doing the dismantled masonry to original condition, etc., complete complying with standard specifications. (The EWC and flushing tank with all accessories should be got approved by the Executive Engineer before use on works) Floor Fitting

Supply, Delivery and fixing of ISI make 1.0HP Mono block pump including cost of material, labour charges and all other incidential charges etc., complete as per standard specification and as directed by the departmental officer. (M-1063)

GST 18%