Municipal Administration And Water Supply Department Tender

Providing and laying in position Standardised Concrete Mix M-20 Grade in accordance with IS 456 - 2000 using 20mm and down graded hard broken granite stone jelly for all RCC items of works with minimum cement contenet of 325Kg/ cum and maximum water cement ratio of 0.55 including admixture (Plasticiser / super plasticiser) in recommended proportions as per IS 9103 to accelerate, related setting of concrete, improve workability without imparing strength and durability with about (5.0cum), 7730Kg of 20mm machine crushed stone jelly and with about (3.3 cum), 5156kg of 10 - 12mm machine crushed stone jelly and with about (4.79cum) 7670 kg of Crushed Stone Sand (M- Sand), but excluding cost of reinforcement grill and fabricating charges centering and shuttering but including laying, vibrating with mechanical vibrators, finishing, curing, etc and providing fixtures like fan clamps in the RCC floor / roof slabs wherever necessary without claiming extra cost etc., complete complying with standard specification and as directed by the departmental officers

Upto Basement

Supplying and fixing in position C.I.Manhole covers (light or heavy duty) of 60 X 60cm in size in Cement Mortar 1:3 (One part of Cement and Three part of Plastering Sand (P- Sand)), of best approved quality and as per standard specifications etc.,complete.

Manufacturing supplying and fixing of MILD STEEL DOOR made out of 50 x 50 x 6 mm M.S angle for outer frame,35 x 35 x 5mm M.S.Angle for outer frame of shutter. The entire shutter area shall be covered with CRC sheets (18 G) with 5Nos, of stiffners using M.S.Flats of size 25 x 6mm at equal intervals horizontally. The corners of the frames and shutter with CRC sheets shall be welded by adopting flash butt welding or any other suitable method. Provision towards 3Nos, of Hinges incase of single shutters / 6Nos,of Hinges incase of Double shutters of 125 x 31 x 1.25mm size placed at appropriate intervals and provisions shall be made for Tower bolts 2Nos, Aldrop 1No. The frame shall be provided with 6Nos,of Hold fast of 200mm length using 50 x 6mm M.S.Flat. The entire frame and shutter shall be provided with one coat of red oxide primer including cost of hold fasts,hinges, locking arrangements, handles wind appliences etc., complete and as directed by the departemental officers

Fabricating supplying and fixing of roof with Poly carbonate sheet of 6mm thcik with any colour or any other approved design and to be fixed with shelf tapping screws, plastic washer. The washer and screws to be fixed by using minute power machine drilled with out damaging the sheets. The sheet to be fixed with making suitable corrugated, cutting the sheet in to the required ssize and making ornamental designs as per the site condition and as directed by the departmental officers.

Painting two coats for Plastic Emulsion paint approved quality and colour over a priming coat, including thorough scrapping, clean removal of dirt, etc complete and including necessary plaster of paris, putty, wherever required etc, complete as per standard specification.

Painting with Ready Mixed Enamel Paint over the new iron works of approved quality and colour without priming coat including the cost all materials etc.,complete, in all floors.

Wiring with 2 x 1.5 sq.mm. (22 / 0.3) PVC insulated SC unsheathed copper conductor of 1100V grade in suitable PVC rigid pipe on wall and ceiling with PVC accessories and with TW switch box and 5A FT switch with painting of colour for open PVC light point / fan point (for electronic regulator) (5 points per coil) including cost of all material charges and labour charges etc, complete as per standard specification SD 18

Wiring with 2 x 1.5 sq.mm (22 / 0.3) PVC insulated SC unsheathed copper conductor of 1100V grade in suitable PVC rigid pipe on wall and ceiling with PVC accessories with 150 x 100 x 113mm TW switch box for 5A 3 pin non inter locking Wall socket with 5A flush type switch with painting of suitable colour with continuous earth wire connection of 14 SWG TC wire for open PVC plug point including cost of all material charges and labour charges etc, complete as per standard specification SD 36

Wiring with 2 x 4.00 sqmm (56/0.3mm) PVC insulated SC unsheathed Cu.Cable conductor cable of 1100V grade insuitable heavy gauge M.S.conduit pipe on wall and ceiling with M.S.accessories with 150mm x 100mm x 75mm MSswitch box for 15A 3 pin non interlocking CS plug with painting of suitable colour,with continuous earthwire connection by 14 SWG TC wire for open power plug point. SD 39

Supply and fixing of single box type 4' x 40 W fluorescent fitting complete with copper choke and condensor with TW round blocks on wall or ceiling with flu tube with PVC unsheathed copper leads from terminals to the fitting including cost of all material charges and labour charges etc, complete as per standard specification SD 89

Supply and fixing of WT bulk head fitting with guard suitable for 11W CFL lamp including cost of all material charges and labour charges etc, complete as per standard specifications SD 83

Supply and fixing of 1200mm (48") AC Ceiling fan complete with stepped electronic 300W regulator with 1 meter down rod on the existing clamp including cost of all material charges and labour charges etc, complete as per standard specification SD 107

Supply and fixing of 4' x 40W twin street light fluorescent fitting complete with copper choke and condensor with 32mm dia GI pipe (Class 'B') with 1 No. 32mm GI bend complete on the existing post wall with 16A aerial fuse unit on MS plate with PVC unsheathed copper leads MS clamps and aluminium painting with fluorescent tubes SD 95

Supply and fixing of 4 way Single Phase DB of 16 A /way with 16 Amps. DP Switch with metal clad of 500 V (Side Handle) with F & N on suitable angle iron frame work with trunking box, MS cable entry box with PWD earthing including cost of all material charges and labour charges etc, complete as per standard specification SD 145

Supply and run of 2 of 4 sq.mm. (56 / 0.3) PVC insulated SC unsheathed copper conductor of 1100V on 7 / 20 GI bearer wire for service connection mains including cost of all material charges and labour charges etc, complete as per standard specification SD 65

Supply,Delivery and fixing of 20mm dia GI Service Pipe including cost of all material charges and labour charges etc., complete as per Specifications (L.R)

Supplying laying and jointing of 25 mm dia P.V.C pipe (6Kg/SqCm) of approved quality and best variety conforming to I.S.S & with I.S.I mark, of the following sizes including cutting , Fixing to PVC specials using Adhesive but excluding cost of such specials and fixing to wall with necessary teak - Wood Plugs,PVC Clamps and screws,making holes on the wall or drilling holes in roof and making good the dismantled portions to original condition with necessary brick work and plastering wherever necessary with necessary scaffolding charges.

32mm dia PVC pipe

25 mm dia PVC pipe

Supplying and fixing in position P.V.C. specials such as plain bend, door bend, plain tee, door tee, offsets,Y-junction, plain or with door of various sizes best quality confirming to I.S.S and providing leakproof joints including fixing to wall and giving connection to the P.V.C, soil stacks, dismadling the brick masonry or R.C.C. floor or Roof slab and redoing the dismandled portion to original condition etc., complete complying with standard specifications.

25 mm dia PVC Elbow

25 mm dia PVC Tee

110mm dia PVC Elbow

110mm dia PVC Tee

20 mm Dia PVC Screw Down Tap Heavy Type

Supplying and fixing in position best quality P.V.C soil/ waste pipes (6KSC) of various sizes having ISI mark and providing leakproof joints including fixing to the wall with P.V.C/ M.S clamps etc., and making connection to all sanitary fittings, dismandling masonry/R.C.C. works wherever necessary and making good the dismandled portion to the original condition, complying with standard specifications.

110mm dia PVC 6KSC Pipe

Supplying and fixing in position first quality and approved variety of 25mm dia Gun Metal Gate Valve (Heavy type ) with I.S.I. mark of the following sizes including cost of Shellac , thread etc, .including labour for cutting and threading of G.I.Pipes etc. ,complete complying with standard specifications for both internal and external water Supply arrangements.

Supplying laying and jointing 25mm dia G.I. Pipes of approved quality and best varity of B Class pipe of the following sizes including fixing G.I specials but excluding cost of such specials cutting threading of pipes and fixing to wall with necessary teak wood plugs, clamps and screws masking holes on the wall or drilling holes in roof and making good the dismandled portions to original conditions with necessary brick work and concrete and plastering where ever necessary with necessary scafolding charges. The pipes are to be painted with two coats of good variety and best approved quality of synthetic enamel paint over a priming coat of red-oxide primer etc., complete.

Supply, Delivery and fixing of Industrial type Ceiling Exhaust Fan including cost of all materials and labour charges etc, complete (L.R)

Supply and Delivery of Fly Catcher Machine - The Machine must be made in accordance with modern technology to eliminate flies.It must be capable of attracting flies by providing UVa 365mm vave length blue light and the attractes flies must stuck in the consumable glue board kept inside the unit.The specially coated glue board must not only attract trapped flies it must elimnate flies without any noise and smell.The rate includes fixing the machine in position with all cost of material and labour charges etc, complete (L.R)

Supply, Delivery and fixing of 200 Kg capacity bench type Electronic Weighing scale including cost of all materials and labour charges etc, complete (L.R)

Supply, Delivery of Manual Sewer with MS Angle Frame fitted with suitable GI mesh including cost of all materials and labour charges etc, complete (L.R)

Supply, Delivery of Wheel Barrow including cost of all materials and labour charges etc, complete (L.R)

GST 18%