Municipal Administration And Water Supply Department Tender

Supplying and erecting centering for vertical plain/ RCC concrete walls of supply channel, retaining wall etc upto 90Cm height with necessary supports,all cross bracing with mild steel size of 90cm x60 cm and gauge BG 10 stiffened with welded mild steel sheet angles of size 25 mm x25 mm x3mm for bearing laid silver Oak/ Country wood joist of size 7.50 cm x5.0 cm spaced @ about 90 cm C/C and supported by Casurina props of 10 cm to 13 cm spaced @ 75 cm C/C etc,, complete complaying with standered specfications and as directed by the departmental officers. - Plinth Beam

Supply cutting Bending tying and fixing in position of MS (or) RTS grills for RCC work including cost of steel and binding wire etc.,

Supply and Delivery of M20 x 650mm Length "J" type foundation bolts (EN8 Grade) - 4 sets. With necessary nuts & Wahers including Template arrangements.

Providing and laying in position Standardised Concrete Mix M-20 Grade in accordance with IS 456 - 2000 using 20mm and down graded hard broken granite stone jelly for all RCC items of works with minimum cement contenet of 325Kg/ cum and maximum water cement ratio of 0.55 including admixture (Plasticiser / super plasticiser) in recommended proportions as per IS 9103 to accelerate, related setting of concrete, improve workability without imparing strength and durability with about (5.0cum), 7730Kg of 20mm machine crushed stone jelly and with about (3.3 cum), 5156kg of 10 - 12mm machine crushed stone jelly and with about (4.79cum) 7670 kg of Crushed Stone Sand (M- Sand), but excluding cost of reinforcement grill and fabricating charges centering and shuttering but including laying, vibrating with mechanical vibrators, finishing, curing, etc and providing fixtures like fan clamps in the RCC floor / roof slabs wherever necessary without claiming extra cost etc., complete complying with standard specification and as directed by the departmental officers -

Supply and Erection of 8 M Height Octagonal street light pole: Supply, Erection of 8m Free Standing Single Arm Bracket 8 sided Octagonally continously tapered structured pole with base plate of size 300 x 300 x 12mm as per IS-875 with following specification. Bottom Pole Dia - 130mm Top Pole Dia - 70mm Thickness of Pole - 3 mm. The pole should be hot dip galvanized confirming to BESN ISO -1461 with thickness of 65 Micron etc., complete. as per standard specification.

Supply and Delivery of 120W LED Street light fitting made up of pressure die cast aluminium housing with heat resistant toughened glass cover confirming to IP66. Separate compartment for LEDs & electronic driver with CCT of 5000K, PF 0.9. System efficacy 80. Operating voltage range of 120V to 270V with surge arrestor of 5.0 KV. Driver current not than 700mA. Approx. weight of 5.2Kgs. THD 10%. Optics is of TYPE III Distribution. Lumens package not less 120 lm/W for LED Source. Test certificate from NABL accredited lab for LM79 report. In house Testing facility to be available for the same etc complete as per standard specification.

Labour charges for Erection of 8M Octogonal Poles,Heritage type Bracket and 120W LED Hertiage type fitting With Complete set with all labour charges, Crane Charges / Hydraulic ladder Charges etc; complete as per Standard Specification.as directed by the departmental officers.

Supply and laying of 3 core 1.5sqmm power cable including labour charges complete as per standard specification

Supply and laying of. U.G. cable: Supply and laying of 4 core x 16 sqmm PVC armoured (Aluminium) L.T.U.G. cable in a trench to be excavated at a depth of 0.7mtr putting 0.15 mtr layer of sand and covering the cable completly with bricks and sand and refilling the earth to make good.

Supply and providing of cable termination of 4 core x 16 sqmm PVC LT UG (Aluminium) armoured cable with necessary aluminium socket by crimping with electrical connection etc. complete

Supply and Laying of 50mm/38mm dia HDPE pipe on ground with necessary clamping arrangements etc completeAs directed by the departmental officers.

Supply and delivery of MS Kiosk of size 0.75m x 0.45m x 0.75m made up of MS angle of size 50mm x 50mmx 4mm alround covered with 16 gauge MS sheet and kiosk door made up of MS plates of size 25 mm x 3 mm including cutting, welding, grinding, locking arrangements and labour charges etc.,

Add GST 18%