Municipal Administration And Water Supply Department Tender

Painting with first quality emulsion paint two coats over a priming coat including through cleaning, scrapping, removal of dust and including necessary plaster of paris putty works wherever required etc., completed.

Plain Cement concrete 1:2:4 (one cement, two sand and four aggregate) using 20mm gauge hand broken granite stone jelly for foundation including dewatering if found necessary and laid in layers of not more than 15 cm thick and compacted,etc., complete as per the direction of the departmental offiers.

BRICK WORK in cement mortar 1:5 (one cement and five sand) using best quality of Table moulded first class (chamber burnt ) bricks of size 9"x 41/2"x 3° for the following including curing etc., complete complying with standard specifications. (Masonry projections wherever necessary for obtaining the required elevation shall be done without extra cost..,

PLASTERING with cement mortar 1:5 mix(one cement and five sand) 12mm thick in all floors complying with standard specifications.

Supply and fixing Cuddapah slab using 25mm thick and Cement mortar 1:3 mix etc.,complete as per the direction of the Departmental officers.

Wiring with 2x1.5 sq.mm (22/0.3) PVC insulated SC unsheathed Cu.Conductor of 1100V grade in suitable PVC rigid pipe concealed in wall and ceiling with PVC accessories with TW switch box with 5A F.T switch inflush with wall, covered with hylum sheet of 3mm thick with painting of suitable colour for open PVC light / fan point (For electronic regulator)SD 21

Wiring with 2x4 sq.mm (56/0.3) PVC insulated SC unsheathed Cu. Cable of 1100V grade in suitable heavy gauge MS conduit pipe on wall and ceiling with MS accessories with 150mm x 100mm x 75mm MS switch box in flush with wall with 3mm thick hylem sheet for 15A 3 pin non interlocking flush type CS plug with painting suitable colour with continuous earth wire connection of 14 SWG TC wire for open Power Plug Point -SD 14

Wiring with 2x1.5 sq.mm (22/0.3) PVC insulated single core unsheathed copper conductor cable of 1100V grade in suitable heavy gauge MS conduit pipe on wall and ceiling with MS accessories with 150mm x 100mm x 75mm MS switch box in flush with wall, with 3mm thick hylem sheet cover for 5A 3 pin non interlocking flush type CS Plug with painting of suitable colour with continuous earth wire connection of 14 SWG TC wire for open plug point —-SD 11

Supply and Fixing of single box type 1200mm length, 18W LED light 3000k square type fitting with Higher Brand (Philips, Crompton, Havels, Wipro) 6500k square type complete etc., complete as per the departmental officers

supply and txing of 1200 mm (48") AC ceiling fan (Orient, Crompton, Javels, Wipro) complete with stepped electronic 300W regulator with l meter down rod on the existing clamp etc., complete as per the departmental officers - SD 106

Supply and fixing of almonard air circulator Wall mounting fan of size 18” fittings Higher Branded on wall surface on the existing clamp and ail accessories having allony one piece blade, double ball bearing, 90° c oscillation, sturdy closemeshguard, beautiful design, powerful heavy duty motor, push button three speed control mounted within easy reach of hand, vertical angle adjustment from 22° to 45° of RPM 1440 speed etc., comelete as eer the deeartmental officers

Supply & Fixing of 50mm Dia Mild Steel angle Grill etc., complete as per the direction of the departmental officers

Removing the Damaged old AC sheet with timber including hinges, locking arrangements and fastenings etc., complete as per the direction of the departmental officers.

Supplying and fixing of ABS (Acrolynitrile Butadiene Styrene) Design pre laminated door using factory made plain FPVC (Foamed Polyvinyl Chloride) door frame of the size 105 x 40mm with a wall thickness of 10mm made out of extruded rigid FPVC profile mitre joined with 10 Nos. of 50mm long screw. The door frame shall be fixed to the wall by using 80mm long screws through the frame with the help of PVC fasteners to be provided for each vertical member, stiffeners of (,U“ Channel of size 29 x 9 x Imm, 150mm long) 3 Nos. at hinge point, frame reinforcement of {,U“ Gi Channel of size 46 x 22 x0.06mm), bottom tie rod of (,,U“ GI Channel size of 15 x 15 x 1mm), the ABS Shutter of 35mm thick factory made plain prelaminated. ABS (Acrolynitrile Butadiene Styrene) door shutter moulded in different designs, consisting of all round Frame made out of water proof solid foam PVC bar of size 20x32mm, reinforced by 32 x 32mm - 2 Nos. for vertical made out of LVL (Laminated Veneer Lumber), core material of 32mm thick high density craft paper honey comb board, sandwiched on both sides with pre-laminated ABS sheet thickness of 1.5mm, PVC edge banding of size 0.45mm on the vertical sides. Hardware made out of ball bearing butterfly hinges - 3 Nos. for each shutter and IS} make SS round lock complete, including cost of Materials, conveyance and all other Incidental charges and labour charges for fixing the Door neatly etc., complate complying in with the standard specification.

Supplying, Delivery and fixing of Solid wooden Rectangular door Frame best quality designing including cost of Materials, conveyance and all other incidental labour charges for fixing etc., complete complying with the standard specification

Supply of PVC Pipes and Specials materials

110mm of PVC pipes and Specials materials

LONG BODY TAPE

SHORT BODY TAP

ANGLE VALVE

50 mm UPVC Pipe

50 mm UPVC Coupler

25 mm UPVC Pipe

25 mm UPVC Coupler

S/D of 0.SHP Monoblock motor

20 mm tap screw type

S/F of HDPE water tank

Supplying and fixing of position of Indian make Colour glazed earthwere Wash Basin 550mm x400mm with all accessories such as cost iron brakets, 32mm dia CP waste coupling, Rubber plug and chain, 32mm dia G.I whate pipe, 15mm C.P. pillar tap etc.,

Earth work excavation in all kinds of soil including sand, silt, wet sand under water, black cotton, stiff black cotton, clay, hard stiff clay, hard red earth, murram, stoney earth, gravel and shale’s etc. excepting all kinds of rock and boulders exceeding 0.014 cum. in volume including rough dressing and dumping the excavated materials away from work site manually within 50m Initial lead and 2m initial lift as per the direction of Engineer-in-charge for bullding.

Plain Cement Concrete 1:4:8 (one cement, four sand and eight aggregate) using 40mm hard broken granite stone jelly for foundation including dewatering If found necessary and laid in layers of not more than 15 cm thick and compacted etc., complete complying with Standard specification.

Plastering the exposed surface of RCC works in cement mortar 1:3 (one cement theree msand) mix 10mm thickness as per directed by departmental officer etc., complete.

Supplying and fixing UPVC (Un-Plasticized Polyvinyl Chloride) Windows of casement type (open) from the profile the size of outer frame 60mm x 58mm and shutter profile are inforcement with GI/1mm 125GSM and 100% corrosion free, the profiles are multi chambered sections with

Supply and Fixing of single box type 30Watts LED Street light square type fitting with Higher Brand (Philips, Crompton, Havels, Wipro) 6500k square type etc., complete as per the departmental officers

Supply and Fixing Roofing with Galvolume PPLG sheet of 47mm thickness including bolt, nuts and bitumen washe etc., complete as per the departmental officers

Flooring finishing with first quality Antiskid Ceramic tiles of all colours of size 305cm X 305cm X 6mm laid in cement mortar 1:3 mix to 20mm thick and painting with white cement using 0.30 kg/1im2 including finishing the jointing and painting flush with tiles surface etc., complete - 10 m2

Daddoing the walls with first quality approved colour glazed tiles with printed design of 150X150X6 mm laid in cement mortar 1:2 mix to 10mm thick and painting with white cement using 0.40 kg/1m2 including finishing the jointing and painting flush with tiles surface etc., complete - 10 m2

Conveyance of Surplus earth from work site to City outer with average lead of 15 km including loading unloading , Transportation charges etc., complete as per the departmental officers

Supplying, fabricating and placing in position CTD / TMT rods for all RCC works including cost of steel and binding wire also in all floors, complete complying with standard specification 86,86,VI(S3) (S6)VII

Supplying and erecting CENTERING for sides and soffits including supports and strutting up to 3.29 m high for plane surfaces such as RCC SLABS, RECTANGULAR BEAMS, TEE or ELL BEAMS, LINTELS, BED BLOCKS. STAIRCASE WAIST, LANDING SLAB, LANDING BEAM and CANOPY etc., in all floors with all cross bracings using mild steel sheets of size 90cm X 60cm and BG 10 stiffened with welded mild steel angles of size 25mm * 25mm * 3mm for boarding laid over country wood joists of size 10cm X 6.50cm spaced at about 90cm centre to centre and supported by Casuarinas props of 10cm to 13cm dia spaced at 75cm centre to centre etc., complete and as directed.

Supply and erecting shuttering including necessary supports for plane surfaces such as RCC column, footing, plinth beam, stair case etc., in all floors using mild steel sheets of 90cm X 60cm and 10 gauge stiffened with welded mild steel angle for boarding supported by casurina props at suitable intervals etc., completed complying with standard specification and as directed. SI.No.122

Reinforced Cement concrete 1:1.5:3 (one cement, one and a half sand and three aggregate) using 20mm gauge hard broken granite stone jelly for All RCC items of work excluding centering, shuttering, and cost of reinforcement grill but including curing finishing etc., complete and also including fixing fan clamps and fixtures in RCC works wherever necessary as directed by departmental officer etc., complete.

Providing and laying well gravel including cost and conveyance of all materials from approved quarries as noted in lead chart to the road side including loading, unloading and stacking the well gravel at road side to departmental gauge for pre-measurement including labour charges for laying spreading leveling to camper etc., complete as per specifications.

Dismantling the Weathering Course & Pressed Tiles etc. complete as per the directions of departmental officer.

Weathering course in concrete broken stone brick jelly 20mm size ; pure slacked lime over RCC slab. The Proporation being 32:12:5 fo requuired slope and the thickness of roof as required and well beaten with wooden beaters etc., completed - 10 m3

Flooring with Ellis pattern using 6mm chips (No sand to be used) requuired slope and the thickness of roof as required and well beaten with wooden beaters etc., completed - 10 m2

Painting over old iron work for doors, windows, grills, weldmesh, screen etc., two coats etc., complete. as per the departmental officers

Supply and fixing of Mild Steel Door using allround L angle 25x25x6mm thick cross bracing 20x6mm MS flat with necessary locking arrangements including cost and arrangemnets

Supply and fixing of Solid PVC Door with Solid PVC Door Shutters using 19Gauge 19mm MSsquare tubes for styles and outer frames. 15mm MSsquare tubes for top, lock and bottom rails. The steeltubes shall be covered with mm thick solid PVC Sheets. Shutter using 5mm thick solid PVC Sheets for panelling shall rigidly fixed in position including necessary furniture and fittings. The over all size of styles shall be SOmm x 30mm. The over all size of top rail, lock rail and bottom rail shall be 75mm x 30mm. The over all size of frames shall be SOmm x 45mm with suitable rabate for housing the shutter arrangemnets

GST 12 %