Municipal Administration And Water Supply Department Tender

Brickwork in cement mortar 1:5 (one cement / five sand) mix using 2nd Class Chamber bricks of size 8 ¾ x 4 ¼ x 2 3/4" including all cost and conveyance of all materials as per standard specification.

Collection Supply and filling Red Gravel including coast and conveyance of all materials and all labour charges etc,.,

Centring for sides and soffits and RCC slabs and beams, lintels and other flat surfaces below 3M height including strutting and strutting arrangements as per standard specification and removing the same after the specified period and including cost and conveyance of all materials to site and all labour charges and all other incidental charges etc., complete as per standard specification.

Supplying and fabrication of steel for all RCC works including cost of steel, binding wire and labour charges and fabrication and placing in position etc., complete as per standard specification.

Reinforced cement concrete 1:1.5:3 mix using 20mm size ISS gauge HBG metal for foundation including cost and conveyance of all materials to site and all labour charges for mixing, laying, ramming, curing concrete etc., complete as per standard specification.

Manufacturing,supplying & fixing in position Steel windows of MS sheet 20 gauge thick with openable shutter frame and shutter frame made out of steel section confirming to IS 7452/ 1990.The outer frames of windows made of Z section (F7D) of size 25 x 20 x 3 mm confirming to IS7452/1992 mullions are made of (F4B) of section size 46x25x3mm confirming to IS7452/1990.The shutters are individual and each of them can be operated separately. Sash bars are made of 'T'section (T2) of size 25x22x3m, 2nos of sturdy hinges and one numbers of handle cum slatch of special type are fixed for with openable shutter. Suitable opening is left for its any operation. One number of adjustable stay with locking bracket of sufficient length shall be provided for each shutter 4 nos. of 40x40x3mm anngle hold fast 230mm length are welded to the outer frame at appropriate point.M.S square bars of 12mm size is welded to the inner face of the window at equal intervals not excluding 10cm spacings ,20gauge MS sheet is used for covering the shutter. Grill members are painted with one coat of primer.

Fabricating Supply and fixing and position of MS doors with double leave made out of 18 gauge M.S. sheet, outer frame 35x35x5mm angle, inner frame 25x25x5mm angle, cross stiffner with MS flat 25x5mm, altrop tower bolts 2 Nos. two handles and six holdfasts completed welded and rivetted and one coat of red oxide painting including cost of all materials and labour etc., complete

Plastering with CM 1:3 mix, 10mm thick and including cost and conveyance of all materials to site and all labour charges and all other incidental charges etc., complete as per standard specification.

Plastering with CM 1:4 mix, 20mm thick and including cost and conveyance of all materials to site and all labour charges and all other incidental charges etc., complete as per standard specification.

Plastering with CM 1:5 mix, 12mm thick and including cost and conveyance of all materials to site and all labour charges and all other incidental charges etc., complete as per standard specification.

Plain cement concrete 1:2:4 mix using 20mm size ISS gauge HBG metal for foundation including cost and conveyance of all materials to site and all labour charges for mixing, laying, ramming, curing concrete etc., complete as per standard specification.

White washing two coats with freshly burnt shell lime white in colour in all floors including cost of lime and other materials, brushes scaffolding charges, etc., complete complying with standard specification.

Supplying and Painting New Plastered surface with two coats of ready mixed plastic emulsion paint two coats over one coats of primer 10m2