Municipal Administration And Water Supply Department Tender

Providing and laying Prime coat of 7 kgs/10 sqm over the WMM surface treated with primer using 7 kgs of bituminous Emulsion for 10 square meter area including cost of bituminous binder, including labour charges for applying the required quantity of bituminous binder as tack coat manually etc., complete.

Providing and laying tack coat of 2.5 kgs/10 sqm over the WMM surface treated with primer using 2.5 kgs of bituminous Emulsion for 10 square meter area including cost of bituminous binder, including labour charges for applying the required quantity of bituminous binder as tack coat manually etc., complete.

Providing and laying 50mm consolidated thick Dense Bituminous Macadam using 0.24cum of 26.50-13.20mm, 0.25 cum of 13.20-2.36mm and 0.23 cum of 2.36mm & below and with 53.20Kgs of VG30/VG40 bitumen for premixing per 10sqm including cost and conveyance of all materials to CMP site, heating the bitumen and aggregate to required temperature and mixing the min. required temperature in central hot mix plant 20-30 ton capacity, conveying the mix by tipper trucks to worksite, spreading the mix to uniform thickness of 50mm with paver to the specified grades and cross sections and compacted by Vibratory / Pneumatic Roller to the required density etc., including labour for attending to paver at site etc., including hire charges and fuel charges for 20- 30t CMP with bitumen boiler, tipper trucks, Paver Finisher /9m paver finisher, Vibratory / Pneumatic rollers and all other tools and plant required, including fuel and all other incidental charges etc., complete as per specification using CMP as per clause 505 MORTH Rev-5

Providing and laying Bituminous concrete to 30mm thick using 0.13 cum of 19.00-9.50 mm graded metal and 0.17 cum of 9.50-2.36 mm graded metal and 0.26 cum of 2.36 mm & below metal by adding theshredded plastic 10% of Bitumen quantity 5.03Kg (50.30x10%=5.03kg) shredded plastic waste over the aggregate heated to 170 degree celcious in the central hot mix plant, mixed well with 45.27 kgs of hot bitumen VG30 Bitumen (160 degree celcious) 60/70 grade for premixing per 10 sqm to lay 30mm complacted thick of bituminious concrete including the cost of materials and conveyance of all materials to CMP site, heating the bitumen and agregates to the required temperature and mixing the minimum required Temperature in central hot mix plant 20-30 tonnes capacity conveying the mix by tipper trucks to paver site, spreading the mix in required temperature for uniform thickness of 30mm with mechanical paver ( Hydrostatic Paver finisher with sensor control ) to the specified grades and cross sections and consolidated by 80-100 KN Vibratory Roller / Pneumatic roller to there required density etc., inclduing labour for loading bitumen in to bitumen tank and metal to feeder unit, labour for attending to paver site etc., including hire charges and fuel charges for 20-30 t CMP with bitumen boiler, tipper trucks paver finisher /9m paver finisher, Vibratory / Pneumatic rollers and all other tools and plants required, including all other incidental charges etc., complete as per specification using CMP clause 507 of MORTH REV -5 specifications. and IRC SP 098 for palstic waste usage