Municipal Administration And Water Supply Department Tender

Reinforced Cement concrete 1:1.5:3 (one cement, one and a half sand and three aggregate) using 20mm hart broken granite stone jelly for all RCC items of work excluding centering, shuttering and cost of reinforcement grill but including curing finishing, vibrator charges etc., complete and also including fixi fan clamps and fixtures in RCC works wherever necessary as directed by departmental officer etc., complete

Supplying fabricating and placing in position TMT/CTD rods for all RCC works including cost of steel and binding wire also in all floors complete complying with standard specification

Flyash brickwork in cement mortar 1:5 mix (one cement five sand) using for the following including curing etc completed

Supply and filling of well gravel from approved quarry complete direction as per the departmental officers

Supply and laying of rubber mould hydraulic pressed paver blocks complete direction as per the departmental officers

Supplying and fixing of MS steel gate complete direction as per the departmental officers

Plastering with cement mortar (1:5) 12mm thick in all floors including cost and conveyance of all materilas to site and labour charges etc,complete as per standard specifications (S.1.306)

Painting two coats with ready mixed Plastic Emulsion Paint approved quality and colour over a priming coat, including thorough scrapping, clean removal of dirt, etc complete and including necessary plaster of paris, putty, wherever required etc, complete as per standard specification. - 10 sq.m

Painting two coats of Enamel Paint approved quality and colour over a priming coat, including thorough scrapping, clean removal of dirt, etc complete and including necessary plaster of paris, putty, wherever required etc, complete as per standard specification. - 10 sq.m

Supplying and fixing UPVC (Un-Plasticized Polyvinyl Chioride) Windows of casement type (open) from the profile the size of outer frame GOmm x 58mm and shutter profile are reinforcement with Gl/1mm 125GSM and 100% corrosion free, the profiles are multi chambered sections with wall thick of 2mm. The EPDM rubber (black colour) covered with over all the edges of frame and shutter the shutter will be provided with Espag multi power point locks and also it operates as handie. The corners and joints should be welded and cleaned. Radiations free pin headed plain or brown colour glass 4mm thick should be provided to the shutter and it should not allow leakage of water even at most ranging storms and should have key lockable action, security protective hinges, strong locking systems and as per size for arresting noise and energy loss. The connecting mechanism between sash and outer frame that enables opening of the window. The window should be fixed to the wall with 100% packing with screws and silicon packing all round the frames. The window should be got approved from the Executive Engineer before use on work

Providing UPVC (Un-Plasticized Polyvinyl Chloride)Door: Providing and fixing casement doors fabricated from un-plasticized polyvinyl chloride (uPVC sections.Profiles: The profiles should be three chambe system which provides high insulation properties with outer frame 60mm x 55mm with an outer wall thicknes - of 2.4mm. The window unit should be designed with all corner joints mitred and fusion welded. Windows should be steel reinforced with 25 x 24 x 25mm steelreinforcement with a thickness of 1mm to have dimensional stability. The sash should be of 60 x 102mm. The mullion should be of 60 x 74mm. The profiles should have co-extruded seals. Hardware: All the hardware like friction stays, handles should be screwed with self tapping screws. The handles, locks should be designed so that they cannot be released from outside. Glazing: The window system should be glazed with 5mm plain float glass /6mm bison lam Installation: The profiles should be cut to length and welded 45 degrees. The window should be designed such that the water drainage does not pass through the reinforcement chamber. The window system should be fixed directly to the plastered brick wall using self expanding nylon plug and driving m selectroplated screws into plug.

Wiring with 2 x 1.5 sq.mm. (22 / 0.3) PVC insulated single core unsheathed copper conductor of 1100V grade in suitable PVC rigid pipe concealed in wall and ceiling with PVC accessoires in flush with wall with 3mm thick hylum sheet cover with TW switch box and SA FT switch and making good of the concealed portion with suitable colour for PVC concealed light (6 points per coil) (for rooms like bath, toilet & pumproom, etc.)(SD 26)

Supplying and fixing of AC 48'' ceiling fan complete direction as per the departmental officers

Supply and fixing of 40W LED light fitting complete direction as per the departmental office

Supply and fixing of 40W street light fitting complete direction as per the departmental officers

Supply and fixing of stainless steel sink complete direction as per the departmental officers