Municipal Administration And Water Supply Department Tender

Centering for soffits of RCC slabs of plane surface like lintels, beams ,etc.,including strutting 3m high using mild steel sheets of size 90cm X 60cm X and B.G 10 stiffened with M.S angles of size 25mm X 25mm X 3mm laid over silver Oak (C.W) joists of size 10cm X 6.5cm (spaced at about 90cm c/c )and supported dy casurina props of 10cm to 13cm dia (spaced of 75cm C/C) complying with standard specification and directed - 10 m 2 (P & D)Data 38

Plain Surfaces

Suppling and fabricating and placing in position MS (or) R.T.S. bar for reinforcement to all RCC works as per the design given including cost of steel and binding wire also in all floors.

Providing and laying in position Standardised Concrete Mix M-20 Grade in accordance with IS 456 - 2000 using 20mm and down graded hard broken granite stone jelly for all RCC items of works with minimum cement contenet of 325Kg/ cum and maximum water cement ratio of 0.55 including admixture (Plasticiser / super plasticiser) in recommended proportions as per IS 9103 to accelerate, related setting of concrete, improve workability without imparing strength and durability with about (5.0cum), 7730Kg of 20mm machine crushed stone jelly and with about (3.3 cum), 5156kg of 10 - 12mm machine crushed stone jelly and with about (4.79cum) 7670 kg of sand, but excluding cost of reinforcement grill and fabricating charges centering and shuttering but including laying, vibrating with mechanical vibrators, finishing, curing, etc and providing fixtures like fan clamps in the RCC floor / roof slabs wherever necessary without claiming extra cost etc., complete complying with standard specification and as directed by the departmental officers - The Coarse and Fine aggregates to be used should comply with the requiremnents of IS staandards. (No separate payment will be made by the Department for the excess usage of materials)

Foundation and Basement

Supply, Delivery and fixing of RCC Manhole Cover of size of 0.60m x 0.60 m including cost of all materials, fixing etc., Complete (S.No.229 TWAD 2022-23)

Labour for cutting open road for laying water mains or sewer. (Cement Concrete Road) including all cost of material and Labour charges etc., complete as per standard specification (S.No.2 (b)- MISCELLANEOUS WORKS- TWAD 2022-23)

Earthwork excavation in narrow trenches and depositing on bank with an initial lead of 10m & lift of 2 m in sand silt or loose soil, wet sand or silt not under water light black cotton soil, sandy loans and ordinary soil for laying pipes and specials as per standard specification(For Pipeline works) SS 20 B TWAD (IV)C 2022-23

Supply and delivery of 63 mm 6 kg per Sq.cm PVC PIPE ISI make in good quality including cost of all material charges and all labour charges etc., complete as per standard specifications. (S.No.1.0 (II)-(2) TWAD 2022-23 )

Supply and delivery of 40 mm 10 kg per Sq.cm PVC PIPE ISI make in good quality including cost of all material charges and all labour charges etc., complete as per standard specifications. (S.No.394 (e) PWD SoR 2022-23 )

Supply delivery and fixing of follolwing PVC specials including cost of all material charges and labour charges etc., complete

63 mm PVC Bend

110 mm PVC Tee

100 mm GI Flange set

100 mm x 63 mm PVC Reducer

50 mm NRV

Solvent Cement

Laying and jointing of 63 to 160 mm PVC pipe with specials including cost of all labour charges and testing with water refilling charges etc., complete as per standard specifications

Supply and fixing of 100 mm CI D/F SLUICE VALVE WITH CAP/ WHEEL AS PER IS 14846/2000 PN 1.0 WITH ISI MARKING Scour Valve ISI make in good quality including cost of all material charges and all labour charges etc., complete as per standard specifications. (S.No.12.0 (4) TWAD 2022-23 )

Supply and fixing of 50 mm CI D/F SLUICE VALVE WITH CAP/ WHEEL AS PER IS 14846/2000 PN 1.0 WITH ISI MARKING Scour Valve ISI make in good quality including cost of all material charges and all labour charges etc., complete as per standard specifications. (S.No.12.0 (1) TWAD 2022-23 )

Refilling with excavated sand complying with standard specification in the narrow trenches in layers of 15cm thick after the pipe are laid jointed and tested and successfully as directed by the Department Officers

Supply and delivery of Open well Submersible pump set (600 Lpm x 50 m )conforming to IS 14220 /2002 and as amended thereafter and BEE 3 Star Rated capable of discharging the following duties due to all causes. The pump shall be with stainless steel shaft and dynamically balanced bronze mixed type impeller, CI FG 200 grade casing and brass screws and rotor shall be of copper rod as per IS 613/1984 with ISI mark. The pump suitable for installation in sump with 1.1KV grade 3 core suitable copper flat submersible cable to a length of 15m with necessary cable joints. The non-return valve located at the top of the pump in the discharge outlet connection is to be designed with minimum friction. The pump should be directly coupled to 2880 RPM, three phase, 50 Hz (±5), 415V+6% & 415V-15% squirrel cage induction motor suitable for DOL upto 5 HP , Fully Automatic Air break Star Delta up to 20 HP and AutoTransformer starter for above 20 HP starting and for continuous operation. (S.No.4.0 (79) TWAD 2022-23 )

Construction of Pedastal Tank using Brick work in CM 1:5 mix, Necessary earth work 0.45m depth, PCC 1:5:10 for base and plastering in cm 1:5 mix for surface and standard height 1.20m (1.20x1.20x1.20) etc., as per standard specification

Brickwork in Cement Mortar 1:5 Mix (One Cement, five Sand)using Country bricks of size (8 ¾ x “4 ¼“ x2 ¾ ) including cost and conveyance from approved Quarry to site and labour Charges etc., Complete as per standard specifications.

Supply and delivery of MS Kiosk of size 0.75m x 0.45m x 0.75m made up of MS angle of size 50mm x 50mm x 4mm alround covered with 16 gauge MS sheet and kiosk door made up of MS plates of size 25mm x 3 mm including cuting, welding, grinding, locking arrangements and labour charges etc., complete

Erection of 2 HP Openwell Submersible motor pumpset in single phase as per IS 8034 without panel board for 20 LPm x 100m Head including all material charges and labour charges etc., complete as per TWAD specifications.

Supply and delivery and fixing of 1000 Litres capacity HDPE tank as per IS 12701 / 1996 including loading,unloading, transportation and labour charges for fixing of the GI pipes and specials for pipe connection works including cutting, threading and fixing charges etc., complete as per standard specifications.

Supply and fixing of 2.00 HP single phase Panel Board for ISI make in good quality including cost of all material charges and labour charges etc., complete as per specifications.

Supply and delivery of 4.00 sq.mm PVC insulated and sheathed 3 Core Flat type Copper Cable conforming to IS 694/1990 including all cost of material and labour charges etc., complete as per standard specifications

Supply,Delivery and fixing of 56/0.3 (4sqmm) GI service wire including cost of all material charges and labour charges etc., complete as per specifications.

Supply,Delivery and fixing of 20mm dia GI service pipe including cost of all material charges and labour charges etc., complete as per Specifications.

GST 18%