Directorate Of Town Panchayats Tender

Supply and delivery of Mechanised Beach Cleaning using Barber Equipment (400HD) it should hold minimum 2 cubic metre of debris, minimum cleaning width should be 7 feet, Dump height should be not less than 9 feet, it should clean not less than 6 acres per hour both in dry & Wet beach sand, Cleaning depth is Adjustable to not less than 6", Conveyor of bar flight type, covered with continuous 6' wide belt with stainless steel spring tines, mounted on it or rotary wheel along with stainless steel spring tines mounted on it, Hydraulic drive Completely sealed and protected by the full flow fitter, large capacity spline mounted pump hydraulic motor flow control and built in overflow protection, Suitable diamensions H x L x W and weight of the machine, Suitable size spare tyres to be provided, it should be removed to Broken glass plastic bottles syringes cigratte butts pop tops straws cans, tar, balls, stones 3/8" to 6" (13MM TO 150mm) in diameter sea grass seaweed fish small pieces of wook and garbage etc., operating speed should be able to clean up to speed not less than 15Km/hr, working area Should work equally wel in wet sand and in Dry Sand, opertator should have excellent visibility from the tractor of the area to be cleaned and also the area immediately in front of the Beach Cleaning Machine, it should be able to continuously clean the beach even while turning, versatility should have a stable wide wheelbase and low center of gravity, Should be capable in areas other than the beach to pick stone, remove thatch and remove garbage from grass or paved areas it Should have a towing tractor, which can be quickly detached and used for other purposes, Entire Frame of Beach Cleaning Machine should be full hot dip galvanized. (Entire Frame includes Bucket, moidboard, lift arms, Stainless Steel tines and hardware) Tines Should be Stainless Steel, painting with Polyurethane enamel or equivalent (Corrostion resistant), should be constructed with ease of maintenance as a primary consideration, it should have lubrication option, finishing Should grade the beach while cleaning. It should knock down the high spots and fills in the holes, The warranty of the Beach Cleaning Machine should be for minimum Two (2) full years from the date the customer puts it into operation. Everything including the chains, sprockets, tines etc., should be covered under this warranty, Necessary basic tool kit and firest aid boc with kit should be provided at free of cost