Directorate General Of Lighthouses And Lightships Tender

15 mm cement plaster on rough side of single or half brick wall finished with a floating coat of neat cement of mix :1:3 (1 cement: 3 fine sand) on circular work not exceeding 6 m in radius in one coat, Extra for plastering exterior walls of height more than 10 m from ground level for every additional height of 3 m or part thereof.

Up to 10.00m height

From 10.00 m to 13.00m

From 14.00 m to 16.00m

From 17.00 m to 19.00 m

From 20.00 m to 22.00 m

From 23.00 m to 25.00 m

From 26.00 m to 28.00 m

From 29.00 m to 31.00 m

From 32.00 m to 34.00 m

From 35.00 m to 37.00 m

From 36.00 m to 40.00 m

From 41.00 m to 43.00 m

From 41.00 m to 45.00 m

Painting to lighthouse tower to the exterior approved first quality and colour of approved brand of ( Apex Ultima) in alternate band after applying of one coat of primer in Lighthouse tower at all height Finishing walls Premium acrylic emulsion paint ( having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Apex Ultima Company Depot Tinted) with silicon additives. New work (Two or more coats applied @ 1.43 litre/ 10sqm. Over and including priming coat of exterior primer applied @ 0.90 litre/10 sqm. including marking of bands of Required Size etc complete., including supply of all materials, labours, tools, rope,Craddles, ladders etc. complete.

Painting to Lighthouse tower to the interior on existing painted surface with 2 coats of Synthetic enamel paint of approved first quality and colour of approved brand of Asian/Berger after applying of one coat of primer wherever required in Lighthouse tower at all height, after scrapping and cleaning the worn out paint as and wherever directed, including supply of all materials, labours, tools, rope, Craddles, ladders etc. complete.

Painting with synthetic enamel paint of approved brand and manufacture to give an even shade :Two or more coats on new work under a coat of With ready mixed red oxide zinc chromate primer of approved brand and manufacture on steel galvanised iron/ steel works( For LH tower )

Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade :One or more coats on old work for Doors and Windows. ( For LH tower )

Melamine polishing on wood work (one or more coat).( for tower main Door)

Patch plasterings 15 mm cement plaster finished with a cement : 1:4 (1 cement : 4 fine sand) in buidings and compound wall etc complete.,

Replacement of damaged netlon mesh of windows, ventilatiors, meat safe, shutters etc and as wherever directed including removing the damaged netlon mesh and refixng with new ones with teak wood being, including disposal of unserviceable materials etc, supply of all labours, tools, materials, etc. complete

Supply and Fixing of 4mm glass panes with wooden fillets. including the cost of supply of all labours, materials, tools & plants, scaffolding and all other charges etc., complete .

Painting two coats or more coat Exterior wheather paint (APEX ULTIMA) over a coat of cement primer with First quality of approved manufactures on undecorated wall surface, Ceiling surface to give an even shade including thoroughly brooming the surface to remove all dirt, dust, mortar draps and other foreign matter etc., applying one coat of cement primer including the cost of supply of all labours, materials, tools & plants, scaffolding and ladder,brushes, puttywhere ever required and all other charges etc., complete .

Painting two coats interior plastic emulsion paint with first quality of aproved manufactures on undecorated wall surface, Ceiling surface to give an even shade after thoroughly brooming the surface to remove all dirt, dust mortar, draps and other foreign matter etc., where ever required applying one coat of cement primer etc . including the cost of supply of all labours, materials, tools & plants, scaffolding and ladder,brushes, and all other charges etc., complete. Brand Asian/Berger

Painting with synthetic enamel paint for door & windows of approved brand and manufacture of required colour to give an even shade :One or more coats on old work:

Painting with synthetic enamel paint of approved brand and manufacture to give an even shade :Two or more coats on old work under a coat of With ready mixed red oxide zinc chromate primer of approved brand and manufacture on steel galvanised iron/ steel works.

Providing and laying factory made chamfered edge Cement Concrete paver blocks in footpath, parks, lawns, drive ways or light traffic parking etc, of required strength, thickness & size/ shape, made by table vibratory method using PU mould, laid in required colour & pattern over 50 mm thick compacted bed of sand, compacting and proper embedding/laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with sand and cutting of paver blocks as per required size and pattern, finishing and sweeping extra sand. complete all as per direction of Engineer-in-Charge, 60 mm thick cement concrete paver block of M-35 grade with approved colour, design & pattern.

Providing and laying Cement Providing and laying in position cement concrete of specified grade- 1:3:6 (1 Cement, 3 M-Sand and, 6 hard granite stone aggregate of 20 mm down gauge of approved quality) including mixing, laying,ramming,curing, etc., Supply of all labours, materials, tools & plants etc., Complete.

Providing and laying cement concrete 1:2:4(1 cement: 2 sand/ M-sand: 4 stone aggregate 20mm down guage) for CC Road with finishing etc as directed, including, mixing, laying, compaction including cost of supply of all labours, materials, tools & plants,curing and all other charges etc. complete.

Raking out joints in lime / cement mortar and preparing the surface for repointing. Flush pointing With cement mortor 1:3 mixed with 2% integral water proofing compound by weight of cement for flat brick tile on top of roof, Supply of all labours, materials, tools & plants etc., Complete.

Earth work in excavation by mechanical means (Hydraulic excavator)/manual means over areas (exceeding 30 cm in depth, 1.5 m in width as well as 10 sqm on plan) including getting out and disposal of excavated earth lead upto 50 m and lift upto 1.5 m, as directed by Engineer-in-charge. All kinds of soil.

Brick work with common burnt clay F.P.S. (non modular) bricks of class Cement mortar 1:4 (1 cement : 4 coarse sand) designation 7.5 in foundation and plinth in:Cement mortar 1:4 (1 cement : 4 coarse sand).

20 mm cement plaster of mix 1:4 (1 cement: 4 coarse sand) cement plaster over roof slab after cleaning the surface well removing the loose material and dust particles etc complete.

Providing and laying Ceramic anti skid floor tiles of size 300 mm x300 mm (thickness to be specified by the manufacturer), of first quality conforming to IS : 15622, of approved make, in all colours, shades, except White, Ivory, Grey, Fume Red Brown, laid on 20 mm thick bed of cement mortar 1:4 (1 Cement : 4 Coarse sand), jointing with grey cement slurry @ 3.3 kg/ sq.m including pointing the joints with white cement and matching pigments etc., complete.

Providing and fixing water supply pipe in various dia of CPVC of approved first quality pipes ( FINOLEX/ PRINCE/ ASHIRVAD/ORIPLAST/SUPREME) including all CPVC fittings like Elbow,Tee etc., fixing in walls, ceiling with necessary G.I Clamps, Screws and laying of pipes in trenches of dia varying from 20 mm to 75 mm dia as and directed.including cost of supply of all materials,labours,tools and plants and all other charges etc., complete.

20mm dia CPVC pipe

25mm dia CPVC pipe

32mm dia CPVC pipe

Providing and fixing on wall face unplasticised 110 mm diameter Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion.

Providing and fixing follwing PVC heavy duty accessories like Elbow, Tee, Bend, Reducers etc., of dia in 100 mm and 150 mm of Ory plast ,Hariplast,Truebore, Finolex, Nandi, Diamond make with all required fixtures including Supply of all materials,labours, tools and plants and all incidental charges etc., complete.

Coupler

110 mm dia PVC "TEE"

110 mm dia PVC Bend / offset

Providing and fixing ball angle valve CPVC of approved quality, High or low pressure, complete.

20 mm

25 mm

Providing and fixing water supply /sanitary fittings and specials of approved quality and brand of Metro, Waterman, Plumber, Parryware make as per the following items including cost of supply of all labours, materials, tools and plants and all other charges etc complete and specials should be of ISI make and approved quality.

CP Brass 15 mm dia tap ( Long body)

CP Brass 15 mm two Way Tap with Health Faucet Set

15mm CP angular valve

CP waste coupling with 32 mm dia pipes

Providing and fixing PTMT grating 125 mm nominal dia. of approved quality and colour.

Providing and fixing PTMT gully trap

Providing and fixing White Vitreous China Surgeon type wash basin of required size with single hole for pillar tap of Parryware, Hindware, Neycer make of approved with C.I. Brackets painted white included cutting holes and making the same good and fixing waste pipe with C.P. Brass coupling of size 40mm, C.P. Brass chain 50cm long and rubber plug of steel quality including cost of supply of all labours, materials, tools and plants, curing and all other charges etc complete.

Size 450x 300 mm with single hole 15mm C.P. brass pillar tap ( approved colour )

Providing and fixing PVC connection pipe 45 cm length with brass union 15mm nominal bore

Providing and fixing White Vitreous China pedestal type water closet ( EWC )with seat and lid 10 ltrs low level white vitreous china flusing cisten. including fixing of P/S traps, PVC outlet pipe with PVC door bend 100mm dia etc., supply of all labours, materials,curing, tools and plants and all other charges etc., complete.

EWC Pan with ISI marked seat and lid

Cleaning of over head Tank/ under Ground tank by scrapping, cleaning with bleaching powder etc as directed as per the condition. Cost including man and materials, tools & plants etc complete.

Over head Tank (2nos)

Under Ground Tank

Making soak pit 2.5 m diameter 3.0 metre deep with 45 cm x 45 cm dry brick honey comb shaft with bricks and S.W. drain pipe 100 mm diameter, 1.8 m long complete as per standard design. With common burnt clay F.P.S. (non modular) bricks of class designation 7.5.

Supply & Fixing of Prefabricated Portable EWC toilet block of approved make for single user shall be suitable for mounting on plain ground. The Superstructure and base shall be manufactured by using roto-moulded process. The overall dimension of toilet shall be 910 mm (w) x 1075 mm (D) x 2060 mm (H) 1.FLOOR / BASE: The floor/ base shall be double wall constructed readymade base made out with Plastics material by roto-moulded process. The PUF shall be filled in cavity between two walls for extra load bearing. The base shall be single piece moulded with required outlets. Special handle shall be provided on two side of toilet block for easily shifting, loading and un-loading the whole block. 2.Wall / Roof (Superstructure): The superstructure of toilet shall be One piece moulded Plastics walls and roof with single wall construction by Roto molded process. The superstructure shall be fixed on Base with suitable fasteners. The air ventilator shall be provided in three side walls for cross air circulation. A special top cap shall also be fixed on top of toilet for natural light and air vent. The superstructure shall have sufficient number of embossed ribs for better strength. 3.DOOR SHUTTER: 20mm thick and 600mm width Single leaf shutter shall be made out with extruded PVC Section. The door shutter shall be provided with 1 No. aldrops at outside & 1 No. tower bolt in side for locking, and 100mm long handles shall also provide on both the sides 4.SANITATION, PLUMBING & ELECTRICAL WORK: 1 No. Ceramic EWC pot (ISI marked) with solid plastic seat cover and PVC good quality flush tank, 1 No. Drain hole with C.P grater,1 no. Tap connection with PVC Pipe & CP Tap, 1 no of CP health faucet, 1 No of LED Bulb with switch shall be provided inside the toilet. Note : Civil works for base platform not included. The Bio toilet shall be ready to use in all respects and all works including materials, labour, transportation, loading, unloading, installation etc., shall be firms scope. Any item not specifically mentioned, but required for bio toilet installation/ functioning at site as directed by engineer-in-charge shall be provided and no additional claim shall be made on this account. The firm shall ensure the inspection of bio toilets for approval as per the specification at manufactures place, to avoid rejection of item after delivery at site.

Supply & Fixing of Bio septic tank 2000 Litre Specification: Capacity 2000 Ltr, Length 1200 MM, diameter 1200 MM, No of Man Hole : 2,Man hole 450 MM.

Supplying and fixing of Prefabricated shelter shall be suitable for mounting on readymade concrete floor / pillars. The components shall be fabricated at factory for easy to assembly at site. (designed for differently abled person)SPECIFICATION FOR PUF INSULATED PREFABRICATED CABIN. Size : 6*6*8 Ft M.S. Structure: The supported M.S. Structure like column, truss / portal truss, purlin, tie member etc. shall be made out with suitable size rolled / tube / folded sections. The structure shall be painted with One coat of red oxide as primer. Wall: The insulated walls shall be made of Sandwich panels. The sandwich panels shall be made out of 0.35mm thick Pre coated steel sheet on both side of PUF ( Polyurethane foam ). The total thickness of panel shall be 30mm. The panels are join together by tongue and groove method. (RAL 9002- WHITE COLOUR) Roof: The insulated Roof cladding shall be done with sandwich type panels. The panels shall be made out with 0.35 mm thick Pre coated Profile steel sheets at outer side and 0.35 mm thick Pre coated plain sheet at inner side of PUF ( Polyurethane foam ). Total thickness of roof panel shall be 30 mm. Suitable ridge shall be made out from Pre coated steel sheets. The roof shall have minimum projection of 0.3m from the eaves wall and 0.15m from the gable walls. (RAL9002 -WHITE COLOUR) Door : The door frame shall be made out with MS Folded section. The shutter shall be made out with Pre coated steel sheets both side of PUF. The door shutter shall be fixed with the door frame with hinges. The door shutter shall be provided with 1 No. aldrops at out side, 1 no. Tower bolts at the center inside and handles shall be provided on both the sides. The width of Door shall be 1mt . Ventilator: 3 side suitable ventilator shall be provided. SANITATION, PLUMBING & ELECTRICAL WORK: 1 No. Ceramic EWC pot (ISI marked) with solid plastic seat cover and PVC good quality flush tank, 1 No. Drain hole with C.P grater,1 no. Tap connection with PVC Pipe & CP Tap, 1 no of CP health faucet, 1 no of side handle / CP towel rail, 1 No of LED Bulb with switch shall be provided inside the toilet. Notes : Civil works for base platform not included. The Bio toilet shall be ready to use in all respects and all works including materials, labour, transportation, loading, unloading, installation etc., shall be firms scope. Any item not specifically mentioned, but required for bio toilet installation/ functioning at site as directed by engineer-in-charge shall be provided and no additional claim shall be made on this account.Provision for 300 litres Loft tank: Shall be provided on top of the toilet Roof. The firm shall ensure the inspection of bio toilets for approval as per the specification at manufactures place, to avoid rejection of item after delivery at site.

Providing and fixing stainless steel ( Grade 304) railing made of Hollow tubes, channels, plates etc., including welding, grinding, buffing, polishing and making curvature (wherever required) and fitting the same with necessary stainless steel nuts and bolts complete, i/c fixing the railing with necessary accessories & stainless steel dash fasteners, stainless steel bolts etc., of required size, on the top of the floor or the side of waist slab with suitable arrangement as per approval of Engineer-in-charge, (for payment purpose only weight of stainless steel members shall be considered excluding fixing accessories such as nuts, bolts, fasteners etc.).Schl 38

Providing and placing on terrace (at all floor levels) polyethylene water storage tank, IS : 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank.