Corporation Of Chennai Tender

Plastering with cement mortar 1:4 (1 cement and 4 Crushed Stone Sand (Commercially called M-Sand))12mm thick including curing, etc., complete.

Painting the new plastered walls with two coats of Exterior emulsion paint (weather proof ) first class quality and of approved colour over a priming coat including thorough scrapping clean removal of dirt etc. complete and including necessary plaster paris putty etc. wherever required.as per (ISI STD) (It must provide excellent resistance against the growth of algae and fungi on the walls. And it must offer excellent protection against alkali and UV degradation and the durability period should be 5 years.

Providing and laying in position ,Standardised Concrete Mix M- 20 Grade in accordance with IS :456-2000,using 20mm and down graded hard broken granite stone jelly for all RCC items of works with minimum cement content of 325 kg/m3 and m,aximum water cement ration of 0.55, including admixture (Plasticiser/Superplasticier) in recommended proportions as per IS:9103 to accelerate ,retard setting of concrete,improve workability without impairing strength and durability with about (5.0 cum) 7730 kg of 20 mm machine crushed stone jelly and with about (3.3 cum) 5156 kg of 10-12mm machine crushed stone jelly and with about (4.79 cum) 7670 kg of sand, nut excluding cost of reinforcement grill and fabricating charges,centering and shuttering and also including laying,vibrating with mechanical vibrators,finishing,curing,etc and providing complying with standard specification and as directed by the departmental officers. The coarse and fine aggregates to be used should comply with the requirements of IS Standrands.(No separate payment will be made by the Department for the excess usage of materials)

Supplying and fabricating STEEL including cutting, bending hooks, cranking, fabricating, assembling and laying in exact position,typing with soft steel wire 18 gauge ,etc., complete conforming to BIS std.

Supplying and erecting centering for sides and soffits including supports and strutting upto 3m high for plane surface such as RCCslab rectangular beams TEESupplying and erecting centering for sides and soffits including supports and strutting upto 3m high for plane surface such as RCCslab rectangular beams TEE or L beams lintels bedblocks staircase waists and landing slabs landing beams canopy etc. with all cross bracings using mild steel sheets of a size 90x60cm and 10 gauge stiffended with welded mild steel angles of size 25x25x3mm for boarding laid over silver Oak(Country wood) joists of size 10x6.5cm spaced at about 90cm centre to centre and supported by casuarina props of 10 to 13cm dia spaced at 75cm centre to centre etc. complete.

Supplying and erecting shuttering including necessary supports for plane surface in foundation and basement for RCC column footings pintol blocks plinth beam staircase steps critical steps critical piers etc. using mild steel sheets of size 90x60cm and 10 gauge stiffened with welded mild steel angles of size25x25x3mm for boarding laid over silver Oak (country wood) joistsof size 10x6.5cm spaced at about 90cm centre to centre and supported by casuarina props of 10 to 13cm dia spaced at 75cmcentre to centre etc. complete.

Supplying and erecting centering for sides and soffits including supports and structting upto 3m high for plane surfaces such as RCC coloumns top and bottom slabs of boxing. sill labs sunshades etc. with necessary facia using mild steel sheets ofsize 90x60cm and 10 gauge stiffened with welded mild steelangles of size 25x25x3mm for boarding laid over silverOak(country wood) joists of size 10x6.5cm spaced at about 90cm centre to centre and supported by casuarina props of 10 to 13cm dia spaced at 75cm centre to centre etc. complete.

Supplying and erecting centering for sides and soffits including supports and shuttering upto 3m high for plane surface such asRCC circular coloumn using mild steel sheets of size 90x60cm 10gauge stiffened with welded mild steel angles of size 25x25x3mmfor boarding laid over silver Oak(country wood) joists of size10x6.5cm spaced at about 90cm centre to centre and supported bycasuarina props of 10 to 13cm dia spaced at 75cm centre to centreetc. complete

Brick work with fly ash bricks of size 230mm x110mm x70mm inC.M.1:6 (1 cement and 6 Crushed Stone Sand (Commercially called M-Sand)) including curing,etc.,complete for 23cm thick walls upto basement.(upto 1m high aboveG.L.)

Granolithic flooring 40mm thick with cement concrete 1:2:4 (1cement and 2 Crushed Stone Sand (Commercially called M- Sand) and 4 blue granite broken stone jelly 3to 10mm gauge) and top rendered smooth with cement at 10kg per10sq.m. including thread lining,curing,providing 25mm diaG.I.pipe of necessary length for water outlet etc.,complete asdirected during execution.

Supplying and erecting in position LIGHT DUTY STEEL TRUSSES as per the drawing. The materials and design of the trusses should confirm to the relevant Indian Standard specification. The trusses shall be procured only from reputed manufactures of trusses with prior approval of the Buildings Engineer and a certificate to the effect from the reputed manufacturers shall also be furnished with design. The rate quoted shall include the cost of trusses. Base-plate with holding down bolts and nuts to RCC or Masonry works, roof purlins, rafters, purlin sleeves, the members fixing accessories etc., painting one coat of red- oxide paint and erecting in position etc., complete as directed during execution. The contractor shall also arrange to provide grouting for holding down bolts embeding the end purlins, to the gable wall wherever necessary etc., The roof sheeting shall project 0.762m from the eves purlins. For structures like CYCLE STAND, PARKING GARAGE, TEMPORARY ENCLOSERS

Roofing with galvanised corrugated iron sheets (thickness of sheet 0.8mm) including J bolts and nuts with bitumen washers etc. complete (ISI STD).

Painting new iron work two coats with ready mixed paint with relevent ISI STD of superior quality and approved colour..

A)Boxing ring 24’ x 24’ is made by six tables 12’ x 8’ having the following details 1. Size 24ft x 24 ft from corner poles i.e. total area 2. Size 20ft x 20 ft from rope to rope i.e. playing area. 3. Height of ring is 1 mt. from ground level 4. Four ropes 3.5” thick covered with synthetic in white, blue and red color or P.V.C. white pipe 5. Corner poles made of 4” pipe in white, blue and red color. 6. Laminated waterproof wooden planks of 8’ x 3’ and 8’ x 4’ are used on the top of six tables. These planks make level of the floor equal & nice. 7. Total wooden floor is covered with 3/4 “ (E.P.) Expended polythene foam. Then this foam is covered with waterproof canvas cover. 8. Four protection corner padding are used to cover corner poles to protect injury to player 9 . All four corner poles are attached with cross link tensioned wires with coupling tighter with each other diagonally.

Boxing Punching Bag – Filled Bag – with Steel Chain – 3ft

Boxing Punching Bag – Filled Bag – with Steel Chain – 5ft

Boxing Punching Bag – Filled Bag – with Steel Chain – 4ft

Boxing Gloves - 10 oz (USI or Equivalent)

Boxing Gloves -16 oz (USI or Equivalent)

Boxing Punching Gloves (RXN or Equivalent)

Boxing Punching Pad

Skipping Rope

Swiss Ball – NIVIA Anti Burst Ball - 75 CM (Nivia or Equivalent Brand)

Mouth Guard

Swiss Ball – NIVIA Anti Burst Ball - 85 CM (Nivia or Equivalent Brand)

Medicine Balls – 3kg (Nivia or Equivalent Brand)

Medicine Balls – 5kg

Tara band

Yoga Mat of Standard Size

Missing Ball with Chain (USI Or equivalent Brand)

Crepe Bandage (USI or equivalent Brand)

Boxing Punching Dummy