Rajcomp Info Services Limited Tender
If you're looking for Rajasthan tenders online and are tired of typing tender ID over and again or going through the cumbersome government websites for it, you are in luck. We have collated every Eproc Rajasthan tender on BidAssist. And for any queries related to an e-tender Rajasthan, like bidding process, registration process, etc., are explained below. Read on.
Costs
EMD
₹ 3,00,000Document Cost
₹ 2,000Tender Fee
₹ 2,000
Description
Scription for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user
Contact
Tender Id
2024_RISL_393537_1Bid Award Id
ViewTender No
F3.3(523)/RISL/Pur/2024/2051 dated 07-06-2024Tender Authority
Rajcomp Info Services Limited ViewPurchaser Address
-Website
http://http://risl.rajasthan.gov.in/
GEM & Bid Advisory Services
Get portal registration, tender bidding, product/service listing or vendor/MSME certification services at a nominal cost
Documents
BOQ Items
Providing and fixing of MS work steel gate, grating, and grills made of angles, tees, square bars, flats,or black pipe with holdfast and fittings complete as per design and drawing including cutting welding and fabrication with priming coat of red oxide. square,rectangular hollow tubelar sections could be used and The rate shall include the cost of primer and enamel paint on all structural steel work.
150
-
-
Repairs to plaster of thickness 12mm to 20mm in patches of area 2.5 sq. metres and under including cutting the patch in proper shape, raking out joints and preparing and plastering the surface of the walls complete including disposal of rubbish to the dumping ground within 50 m lead : With cement mortar 1 :4 ( 1 cement : 4 coarse sand)
120
-
-
Providing and laying Plaster on new surface on walls in cement sand mortar 1:4 including racking of joints etc. complete fine finish : 12 mm thk. (the rate is inclusive of work upto all floor level including scaffolding & double scafloding )
250
-
-
Providing and fixing Chicken mesh jali (22 gauge) at the junction of 2 different surfaces of different material component at the time of plastering to prevent cracking in plaster surface as and where directed at all floors with all leads and lifts etc.complete.
30
-
-
Providing and layiing Wall painting with plastic emulsion paint of approved brand and manufacture to give an even shade including all scaffolding: Two or more coats on new work including prepartion of base with primer, putty, lippy etc complete in all respect.
600
-
-
Providing and laying external paint on walls with Acrylic Smooth exterior paint of required shade including all scaffolding. New work (Two or more coat applied @ 1.67 ltr/10 sqm over and including base coat of water proofing cement paint applied @ 2.20 kg/ 10 sqm).
450
-
-
Providing and laying Painting with synthetic enamel paint of approved brand and
manufacture to give an even shade : One or more coats.
50
-
-
Terrace Water Proofing Supplying and Installing complete in all respects waterproofing as per given standards,and finally installing broken china mosiac tiles as per specification below 1) Waterproofing with 2 component chemical - Cleaning the surface to remove all loose particles and any deleterious matter. Treatment of Cracks/construction joints as per specification – A U shaped groove will be made of 10mm wide and 15-20mm deep which will be filled up with Kasa Sbr 1103 or equivalent cement putty consistency one parts of compound bonding Polymer Mixed with one part of Cement. One primer coat of Kasa Sbr 1103 or equivalent mixed in a ratio of 1:1:1 with cement and water using fiber net on entire area. Making of Gola Side gola 75 X 75mm in the corner of the wall and floor by cement mortar mix with Kasa Sbr 1103 or equivalent. one coat of Kasa Hydrostop 2k or equivalent (An elastomeric waterproof coating) mixed with pre measured high strength elostomeric polymer which forms a flexible reinforced membrane on the entire surface.Final Waterproofing coating-Second Coat of Kasa Hydrostop 2k or equivalent (An elastomeric waterproof coating) mixed with pre measured high strength elostomeric polymer Labour rate including all other tools and transportation complete in all aspects. 2) Providing and laying Mosaic tiles 200mm x 200mm finish with all sides of vata using 20 mm base of cement mortar 1:4 ( 1 cement : 4 Fine sand) with cement slurry @ 2.75 Kg of cement per Sqm, mixing of water proofing material including filling up the joints with grey pigmented cement rounding of edges and corners all complete as per the direction of Engineer in charge. Certificate of Terrace Waterproofing Warranty for a period of 5 Years to be submitted.
50
-
-
Providing and Drilling or Core cutting, horizontal, vertical or inclined holes in reinforced cement concrete and / or hard rock & filling the gape with suitable materials.
-
-
-
Diameters above 32 mm but up to 100 mm for a depth / length upto 450 mm
10
-
-
Diameters above 100 mm upto 200 mm for a depth / length upto 450 mm
10
-
-
Providing and fixing of SS Sheets 300 x 300 to cover the raceway juction boxes at flooring tiles level
5
-
-
Providing and fixing of SS Sheets 200 x 150 to cover the raceway juction boxes at flooring tiles level
10
-
-
Providing & laying flooring with skirtring of not less than 100mm height vitrified tile over a bed mortar of 20 mm thk in CM 1:5 or chemical laying over existing floor as per the instruction of engineer incharge, including slurry, tiles will be laid with 2 mm gap using spacers and gap will be filled with epoxy grouting of matching color complete as per specifications. Necessary protective covering to prevent damage for the finish flooring to be given 300 microns plastic sheet and POP spread over it at no extra cost and to be retained until handover. Tiles size:600*1200, thickness not less than 9mm. Mode of measurement: floor area
300
-
-
Providing and fixing Green / Black Granite stone slab mirror polished and machine edge cut in walls, pillars, steps, Shelves, Sills Counters, Floors etc. laid on 12mm (Av.) thick base of cement mortar 1:3 (1 cement : 3 coarse sand) jointing with white cement mortar 1:2 (1white cement : 2 marble dust) with pigment to match the shade of the marble slab including grinding, rubbing and polishing complete.
Above 3601 Cm2 Slabs
70
-
-
Providing and laying of Cement concrete flooring 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate) finished with a floating coat of neat cement including cement slurry, making of lines or groove etc complete but excluding the cost of nosing of steps etc. complete. 75mm thick with 20mm thick nominal size aggregate.
50
-
-
Dismatling and Demolishing Work
-
-
-
Demolishing Brick work manually / by mechanical means including stacking of serviceable material and disposal of unserviceable material within 5 km lead as per direction of Engineer-in-charge: In cement mortar.
5
-
-
Dismantling doors, windows and clearstory windows steel or wood shutter including chowkhats and holdfasts etc. complete and stacking within 50 meters lead:
-
-
-
Of area 3 square meter and below.
5
-
-
Of area exceeding 3 square meter.
5
-
-
Dismantling tile work in floors and wall laid in cement mortar including stacking of serviceable material and disposal of unserviceable material within 5 km lead:
For thickness of tiles 25mm to 40mm.
250
-
-
Supply and Installation of Vinyl Poster/Graffiti
Poster fixed on the wall/panelling with applying adhesive or self adhesive. Design on posters to be approved by department. Make: 3M or equivalent
100
-
-
Supply and installation of Sign board
Providing and fixing Name plate for individual cabin and rest of the area. Signage's are made up of laser cut Anti-Corrosive high grade AISI 316 Stainless Steel of 2mm thick sheet with laser cut method for impression and with satin finish. Approx. Dimensions: 300 mm X 170 mm X 2 mm.Design and detailing provided by as per engineer in charge
10
-
-
Providing and fixing of Ceramic writing board with 25 X 40 beechwood/ approved beading on 12mm ply - size 2400 x 1200
3
-
-
Providing and fixing of hoardings outside the building as per size give by engineer in chargeApprox. Dimensions:1500mm(W) X 900mm(H) with provision of backlight
1
-
-
Providing and fixing of RCAT Logo in reception made up of laser cut Anti-Corrosive high grade AISI 316 Stainless Steel size 1mtr by 1mtr .details given by engineer in charge.
1
-
-
Providing and fixing of wall poster on wall/paneling of acrylic sheet with UV print in mirror impression on back side of 3 mm thick acrylic sheet with white layer, pasted on wall using 3m Tape. (Size-2'x3')
10
-
-
Supply, Printing and installation of Main Exterior Signage - 3mm ACP Sheet mounted on 1.5"x1.5" MS Square pipe with heave iron angle with "RCAT CENTER BIKANER" & "Logo" in embosed acrylic letters & remaining matter in 3mm thick Black & red acrylic cut letters(Nonlit)
6
-
-
Providing and fixing of 3mm thick black acrylic sheet with golden letters (Inaugral Plage)
1
-
-
Providing & Fixing of PVC Storage Tank ISI Marked (IS : 12701) indicating the BIS license No), of approved make with cover, 25mm dia 1M long G.I. over-flow pipe & 25 Cm. long wash out pipe with plug & socket, including making connection etc., complete of approved design: 500 litres capacity.
1
-
-
Supply and Installation of Water/Door matt Material: Polyvinyl Chloride, Color: Grey
Shape - Rectangular
10
-
-
Supply and Installation of Glass stand
Material: Polyvinyl Chloride,
1
-
-
Providing & Fixing Bevelled edge Mirror of special glass of approved make (Atul, Modi Guard, Saint Gobin or equivalent) complete with 6mm thick asbestos cement sheet ground fixed to wooden screws & washers.
2
-
-
Providing and fixing of Soap dispenser (Heavy Traffic) of approved quality/ make. Makes EURONiCS ES09 or equalant
2
-
-
Providing & fixing 300mmx300mm & 6mm thk. anti skid ceramic tile flooring of approved size set in 12mm thick CM 1:3, with cement slurry, pointing of tiles with Tilemate or equivalent to match the colour of the tiles, Proper slope to be maintiained, curing ,oxalic acid wash etc., complete. no extra charge payable for cutting borders, cutting for drain holes etc.)
25
-
-
Providing and dadoing 300mmx450mm with vitrified tile on a backing plaster of CM 1:4 including slurry,12 mm thick including pointing with matching Cement grout , including acid washing, complete as per specifications and as per the sizes and pattern given by engineers. Rate to include cost of all materials and labour required for the finished job.
60
-
-
Plumbing works for toilets/ pantry inlcuding Providing and fixing of W.C. pan (any type including WC cover,SS jali, health Facuets,cistern 10 liters etc all accessories), Urinals and wash hand basin/ SS sinks for pantry (double bowl with drain board) including pillar cock,angle valve,connection pipe,outlet pipe,ss jali of all sizes with care including all necessary fittings P or S trap. Cost to include if any repair of pipe work or new pipe to be installed in all manners. Toilets to be handed over in working conditions (Two Jobs for Male & Female Toilets)
2
-
-
Providing and laying water proofing treatment in sunken portion of WCs, bathroom etc., by applying cement slurry mixed with water proofing cement compound consisting of applying : a) first layer of slurry of cement @ 0.488 kg/sqm mixed with water proffing cement compound @0.253 kg//sqm .This layer will be allowed to air cure for 4 hours. b) Second layer of slurry of cement @ 0.242 kg/sqm mixed with water proffing cement compound @ 0.126 kg/sqm This layer will be allowed to air cure for 4 hours followed by water curing for 48 hours. The rates includes preparation of surface treatment & sealing of all joints ,corners, junction with polymer mixed slurry.
50
-
-
Clearing grass and removal of the rubbish upto a distance of 5 km
outside the periphery of the area cleared.
1000
-
-
Clearing jungle including uprooting of rank vegetation, grass, brush wood, trees and saplings of girth upto 30 cm measured at a height of 1m above ground level and removal of rubbish upto a distance of 5 km outside the periphery of the area cleared.
1000
-
-
Providing and laying in position cement concrete including curing, compaction etc. complete in specified grade including the cost of centering and shuttering - All work in M10 grade Nominal Mix 1: 3: 6 (1 cement : 3 coarse sand : 6 graded stone aggregate 20mm nominal size) & minimum cement content to be 250 kg per Cu.mt
5
-
-
Providing and laying Random rubble dry stone Kharanja under floor.
5
-
-
Providing and laying flamed finish Granite stone flooring in required design and patterns, in linear as well as curvilinear portions of the building all complete as per the architectural drawings with 18 mm thick stone slab over 20 mm (average) thick base of cement mortar 1:4 (1 cement : 4 coarse sand) laid and jointed with cement slurry and pointing with white cement slurry admixed with pigment of matching shade including rubbing, curing and polishing etc. all complete as specified and as directed by the Engineer-in-Charge : Flamed finish granite stone slab Jet Black, Cherry Red, Elite Brown, Cat Eye or equivalent.
40
-
-
Providing and fixing in position S.S. hand rail in main stair case, landing ,balconies etc. in 2"(50mm) dia S.S. pipe 1.5mm thk. 304 grade resting on1"( 25 mm) S.S. pipe 1.5mm thk. 304 grade size S.S.304 grade square bars 10mm, of clear height 105cms placed at 30 cm c/c including making necessary hold fast fixture (10 mm square bars 22 cm long) embeded in staircase concrete for resting the S.S 304 grade . vertical square bars with holding etc. as per approved design and as required for the work including bending hand rail pipe to proper shape in curves with specials etc. complete ( Approved Makes -Q-rail or equivalent )
10
-
-
Providing and fixing Paver block of M-35,60mm thick to be used in light traffic (Light traffic is defined as a daily traffic up to 150 commercial vehicles exceeding 30 KN laden weight, or an equivalent up to 0.5 million standard axles (MSA) for a design life of 20 years (A standard axle is defined as a single axle load of 81.6 KN) like pedestrian plazas, shopping complexes ramps, car parks, office driveways , housing colonies, office complexes, rural roads with low volume traffic, farm houses , beach sites, tourist resorts, local authority footways, residential roads, etc. Category A Denated units to key into each other on four faces zigzag shape as per IRC SP 63:2004
60
-
-
Supplying and placement of potted plants FRP POTS of Rou Compe S1, S2, S3 (CREDO or similar) including cocopit, manure, plants and complete in all respects
25
-
-
Supplying and planting following PALMS
-
-
-
Arica palm (Height- 3 Feet)
10
-
-
Raphis palm (Height- 3 Feet)
6
-
-
Peace Lily (Height- 3 Feet)
4
-
-
Snake plant (Height- 3 Feet)
5
-
-
Providing and laying POP punning on walls and roof of existing structure and new structure of thickness upto 15mm. All POP in plum level finished to give smooth surface for paint
250
-
-
Finishing walls with textured paint of required shade as per approved colour complete as per manufacturers specifications including primer coat and protecting coat including scaffolding and safety provision Trowel Finish av. thickness 2000 to 2500 microns.
50
-
-
Interior & Furniture Work
-
-
-
SITC of Glass Door :- 12mm thick Frameless tempered clear glass With door spring and locking arrangements and both way handle and patch fittings. Detailed specifications and mode of execution is mentioned in technical Specification of RFP.
15
-
-
SITC of Metallic Door (with OR without Vision Panel)
With door hinges and locking arrangements and both way handle. Prepare with rigid thermo fused film metal panels. Specification: 0.6mm thick Metal panel sheets, the internal cavity filled with adequate quantity of honeycomb. The material of the partition and that of the metal door will remain the same. The material of the partition and that of the metal door will remain the same. The door thickness shall be a minimum 45mm and the frame thickness shall be a minimum of 115mm. Detailed specifications and mode of execution is mentioned in technical Specification of RFP.
5
-
-
Providing and fixing external grade board solid core flush door shutters ISI 2202-67 marked using Phenol formal dehyderesin in glue both sides with approved steel fittings complete including aldrop, mortice lock : 35 mm thick with decorative teak veneer with veneer polish both side. The rate shall include the work of pressed steel door frame confirming to IS 4351 manufactured from commercial mild steel sheet of 1.25 mm thickness including hinges jamb, lock jamb, bead and if required angle threshold of mild steel angle of section. size as per directed by Engineer-in-charge including all hardware
5
-
-
SITC of Designer Metal Baffle Ceiling
Providing & fixing of GMS powder coated baffle ceiling, consisting of panel size 25mm width X 100 mm deep minimum 0.5 mm thick, length up to 3mtr . The system comprises baffles 25mm wide. The baffle height shall be 100mm. Baffle ceiling shall be installed at 125mm C/C distance. The carrier rails run perpendicular to the baffles. Individual baffle lengths between 300 and 2400 mm can be selected. Polylam Baffle ceiling are supplied with the end cap matching the similar finish of baffle. Tolerances according to TAIM, DIN EN 13964 and quality controlled to ISO 9001:2008 approved by TUV. Substructure for Vertical baffle system consisting of U shaped galvanized slotted carriers 1.5mm Thick installed perpendicularly to U profiles at maximum 1200mm centres using cross connectors. The primary profiles must be connected to one another with longitudinal splice connectors. The entire ceiling module shall be suspended with 6mm diameter galvanized steel threaded rods from the true ceiling officially approved anchor fasteners maximum at 1200mm Centres as per the requirements of DIN EN 13964 and the statics of the system. Ensure horizontal and flush alignment during installation. . Baffle will be electrostatically powder coated with minimum 60 micron coating thickness.The system will meet Fire retardant standard of BS 476: Part 6 & Part 7 Mode of Measurements: Measurements shall be wall to wall without any deductions for lights, diffuses, columns etc.
30
-
-
SITC of Designer Acoustic Metal Ceiling of size 600X1200mm
Providing & fixing of false ceiling at all heights with GMS Metal Ceiling Lay in perforated / non perforated Tegular edge global white color tiles of size 600x1200mm,in 0.5mm thick with T grid. The tiles shall be beveled edge, and 20% perforation area with 1.8 mm dia holes The tiles shall have black tissue on back of side having 0.50 NRC value, in true horizontal level suspended on inter locking metal powder coated T Grid of hot dipped galvanized iron section of 0.30 mm .Main T -38x24mm & cross T 38x24mm made of 0.30 mm thick (minimum) sheet, 1200 mm long spaced between main "T" at 600 mm center to center to form a grid of 1200x600 mm and secondary cross "T" of length 600mm and size 38x24 mm made of 0.30 mm thick(minimum) sheet to be interlocked at middle of the1200x600 mm panel to form grids of 600x1200 mm and wall angle of size 22x22x0.3 mm and laying false ceiling tiles of approved texture in the grid including, required cutting/making, opening for services like diffusers, grills, light fittings, fixtures, smoke Detectors etc. Main "T" runners to be suspended from ceiling using GI slotted cleats of size 27 x 37 x 25 x1.6 mm fixed to ceiling with 12.5 mm dia and 50 mm long dash fasteners, 4 mm GI adjustable rods with galvanized butterfly level clips of size 85 x 30 x 0.8 mm spaced at 1200 mm center to center along main T, bottom black grove exposed width 15mm of all T-sections shall be pre-painted with polyester paint, all complete for all heights as per specifications, drawings and as directed by Engineer-in charge. GI Metal Ceiling Lay in perforated Tegular edge global white color tiles of size 595x595 mm and 0.5 mm thick with 8 mm drop; made of GI sheet having galvanizing of 100gms/sqm (both sides inclusive) and 20% perforation area with 1.8 mm dia holes and having NRC (Noise Reduction Coefficient ) of 0.5, electro statically polyester powder coated of thickness 60 microns (minimum), including factory painted after bending and perforation, and backed with a black Glass fiber acoustical fleece.
125
-
-
SITC of Designer calcium silicate ceiling
Plain Calcium Silicate Acoustic Boards for false ceiling with 08mm Approximately thick, Structure for underside of suspended grid formed of GI perimeter channels. Wood screws and metal expansion raw plugs for fixing with wall. Plastic emulsion paint of approved make and shade for finishing surface of Calcium Silicate Boards. Specification: Calcium Silicate Board is manufactured from a mixture of Portland cement, fine silica, special cellulose fibers and selected fillers to impart durability, toughness, fire and moisture resistance.Detailed specifications and mode of execution is mentioned in technical Specification of RFP.
200
-
-
SITC of Roller blinds
Supply & installation of Manual Roller blinds having Aluminum Roller tube along with fabric pasted on it with glue having control unit for manual operations and bottom bar Aluminum powder coated for weight purpose, including fabric, fitting & accessories of approved make & colour etc. complete.
20
-
-
SITC of Designer Privacy film for glass partitions & glass door
The film to be installed on clear glass to provide the look of sandblasted glass. Detailed specifications and mode of execution is mentioned in technical Specification of RFP.
5
-
-
SITC of Reception Counter 1) The furniture work surface shall be straight in shape to maintain grand aesthetic appeal. It shall be made of minimum 25mm thick MDF finish.
2) The structure shall be made up of powder coated steel / Extruded Aluminum Alloy / MDF / board finish.
3) The working side edge: - Audit certified design (from UL/Intertek) feature on front modular polyurethane (PU) edge. High density polyurethane foam molded on industrial grade aluminum core to form minimum 50mm deep tapered edge to be installed on worktop. The edge shall be mechanically replaceable within 30 minutes in case of damage or wear without opening or removing the top. 4) Accesorires : Flap with provision and SITC of 2 nos 16 Amp modular Switch and 5 nos 6/16 amp modular Socket with 2 nos cat-6 LAN point and wire flow can be made as per requirement of Engineer in charge 5) Design as per engineer in charge approval.
Approximate minimum Dimensions – 1800mm(W) X 750mm(D) X 750mm(H).
Detailed specifications and mode of execution is mentioned in technical Specification of RFP.
1
-
-
SITC of 3-Seater Sofa
The top shall be of Upholstery with PU Finish. The sofas are made of solid wood base, reinforced with supportive addendum in the seat. Engineered wood panels form/support the overall design structure, they synergise with the solid wood to offer unparalleled life to the product. Foam padding of multi-density and varying thicknesses provide cushion for the sofa. PU foam used is made Hennecke foam plants using German Technology capable of producing the high-quality flexible polyurethane foam. It provides unparalleled comfort, ease of use and durability. The foam used is 32 Density for seating areas and 28 Density for backrest. The supersoft foam used is in seating areas in 32-35 Density High-resilience (HR) foam which is unique and rarely used by manufacturers. Webbing: Interwoven high tensile elastic bands for optimum comfort and endurance.
1
-
-
SITC of Desk Workstation Table 1) Linear shape tabletop shall be of 25 mm thick MDF board.
2) The working side edge: - Audit certified design (from UL / Intertek) feature on front modular Polyurethane (PU) Edge. High density Poly Urethane Foam moulded on industrial grade aluminum core to form minimum 50mm deep tapered edge to be installed on worktop. The edge shall be mechanically replaceable within 30 minutes in case of damage or wear without opening or removing the top. The necessary certificate / test report valid on the bid date and to be submitted at the time of drawing approvals.
3) Legs: Ergonomically designed and matching with the open office concept. The leg is made out of metal sheet. 4) The screen shall be made of minimum 12mm thick frosted acrylic or fabric panel.
5) Under structure pipe shall be made up of minimum 1.6mm thick CRCA Laser cut components, powder coated with the matching shade/color/finish.
6) Cable tray: Shall be made up of 1mm thick CRCA sheet, Cable tray is used for running the wires between the desk. Powder coating as per RAL shade incompliance with IS standard (CRCA sheet: IS 513, Powder Coating ISI 01). Provision of switch socket and wire flow can be made as per requirement of Engineer in charge.
7) Accessories: Flap with provision and SITC of 2 nos 16 Amp modular Switch and 3 nos 6/16 amp modular Socket with 2 nos cat-6 LAN point and wire flow can be made as per requirement of Engineer in charge.
8) The table shall be Greenguard gold tested/certified (from UL / Intertek ). The necessary certificate / test report valid on the bid date and to be submitted at the time of drawing approvals.
Approximate minimum Dimensions – 1200mm (W) X 600mm(D) X 750mm(H)
Detailed specifications and mode of execution is mentioned in technical Specification of RFP.
4
-
-
SITC of Free Standing Pedestal storage
Versatile 3-drawer office pedestal system solution shall be made up of 0.8mm ‐ 1mm CRCA sheets with powder coated finish. The drawers are meant to store stationary items like pens, calculators, staplers, files, folders, documents etc. It comes with sliding drawers and single lock operation along with caster wheels for 360‐degree movement. The storage shall be Greenguard gold tested/certified (from UL / Intertek). The necessary certificate / test report valid on the bid date and to be submitted at the time of drawing approvals. Approximate minimum Dimensions – 420mm(W) X 450mm(D) X 550mm(H)
Detailed specifications and mode of execution is mentioned in technical Specification of RFP.
4
-
-
SITC of 4 Door locker (Size 380mm(W) X 457mm(D) X 1830mm(H)
1) Material: Cold rolled closed annealed (CRCA) sheet,
2) Thickness: 0.8 mm,
3) Finish: Epoxy powder coat comply,
4) Fixed Shelves,
5) Construction: Revited joints for easy construction and finish & side panel,
6) slotted profile for shelf adjustment,
7) Hinges: Spring Hinges / Soft closing hinges
8) Foot leveling: M6 Threaded top groove Rod with ABS molded.
9) PVC Handle: PVC Molded handle with groove for finger grip
10) Double Layered door with number combination lock with 1 fix and 1 adjustable shelve in each
compartment.
10
-
-
SITC of Medium Height Storage
Flat Pack made up of minimum 0.6mm CRCA powder coated finish with hinged doors and adjustable shelves for different file heights. The front shutters shall have punched graphics matching to the design on the floor Area. The storage shall be Greenguard gold tested/certified (from UL / Intertek).
Approximate minimum Dimensions – 900 mm (W) X 1200 mm (H) X 450 mm (D).
Detailed specifications and mode of execution is mentioned in technical Specification of RFP.
2
-
-
SITC of Cabin desk
1) The furniture shall consist of main furniture, side storage & back storage (as per layout requirement).
2) The furniture top shall be made up of minimum 25mm thick MDF board with molded Polyurethane (PU) Edge.
3) The under structure and complete structure shall be made up of 18mm thick MDF board / MS Structure. 4) The furniture is equipped with handles for easy opening along with soft closing drawers. The Construction shall be of high quality MDF board. 5) The furniture top shall have Flap with provision and SITC of 2 nos 16 Amp modular Switch and 3 nos 6/16 amp modular Socket with 2 nos cat-6 LAN point and wire flow can be made as per requirement of Engineer in charge.
6) The table shall be Greenguard gold tested/certified (from UL / Intertek). Table – 2100mm(W) X 750mm (D) X 750mm(H)
Side Runner – 900mm(W) X 450mm(D) X 750mm(H)
Back Runner – 2100mm(W) X 450mm(D) X 750mm(H)
Detailed specifications and mode of execution is mentioned in technical Specification of RFP.
1
-
-
SITC of SITC of Cabin Table with side runner 1) The furniture shall consist of main furniture, side storage (as per layout requirement).
2) The furniture top shall be made up of minimum 25mm thick MDF board. 3) The working side edge: - Audit certified design feature (from UL / Intertek / NABL / reputed test laboratory) on front modular Polyurethane (PU) Edge. High density Poly Urethane Foam moulded on industrial grade aluminum core to form minimum 50mm deep tapered edge to be installed on worktop. The edge shall be mechanically replaceable within 30 minutes in case of damage or wear without opening or removing the top. 4) The under structure and complete structure shall be made up of 18mm thick MDF board. 5) The furniture is equipped with handles for easy opening along with soft closing drawers. The Construction shall be of high quality MDF board. 6) The furniture top shall have Flap with provision and SITC of 2 nos 16 Amp modular Switch and 3 nos 6/16 amp modular Socket with 2 nos cat-6 LAN point and wire flow can be made as per requirement of Engineer in charge.
7) The manufacture shall be FSC certified. 8) The table shall be Greenguard gold tested/certified (from UL / Intertek / NABL / reputed test laboratory). Table – 1500mm(W) X 750mm (D) X 750mm(H)
Side Runner – 900mm(W) X 450mm(D) X 750mm(H)
Detailed specifications and mode of execution is mentioned in technical Specification of RFP.
2
-
-
SITC of Student Table
1) Tabletop shall be of 25 mm thick MDF board.
2) The working side edge: - Audit certified design (from UL / Intertek) feature on front modular Polyurethane (PU) Edge. High density Poly Urethane Foam moulded on industrial grade aluminum core to form minimum 50mm deep tapered edge to be installed on worktop. The edge shall be mechanically replaceable within 30 minutes in case of damage or wear without opening or removing the top. The necessary certificate / test report valid on the bid date and to be submitted at the time of drawing approvals.
3) Legs: The leg is made out of metal sheet. 4) Accesorires : Switch Board with provision and SITC of 2 nos 16 Amp modular Switch and 3 nos 6/16 amp modular Socket with cat-6 LAN socket point and wire flow can be made as per requirement of Engineer in charge
5) Under structure pipe shall be made up of minimum 1.6mm thick CRCA Laser cut components, powder coated with the matching shade/color/finish.
Approximate minimum Dimensions – 1050mm (W) X 750mm (D) X 750mm(H)
Detailed specifications and mode of execution is mentioned in technical Specification of RFP.
46
-
-
SITC of Chair (Type 1)
High Back with Mesh Backrest, Synchronized Mechanism, Adjustable Armrest, Gaslift for Seat height adjustment, Standard 5-prong Nylon Base. Seat: Fabric, Backrest – mesh, Detailed specifications and mode of execution is mentioned in technical Specification of RFP.
3
-
-
SITC of Chair (Type 2)
Medium Back, Mesh Back, Silver Epoxy Backbone, Synchronized Mechanism,Adjustable Armrest, Gaslift for Seat height adjustment, Standard 5-prong nylon Base, Seat - Fabric and mesh backrest, Detailed specifications and mode of execution is mentioned in technical Specification of RFP.
7
-
-
SITC of Chair (Type 3)
Low back visitor model ABS for seat, Mesh back with extra lumber Support with fine tuning for depth adjustment, with fixed armrest, silver epoxy cantilever base Upholstery: Black Fabric Seat & mesh backrest.Detailed specifications and mode of execution is mentioned in technical Specification of RFP.
51
-
-
SITC of Dustbins/Recycling Units
Recycling Unit shall be made with hinged doors and two holes for collection of different waste.
Shall be made of 0.6-0.8 mm thick Steel. All edges shall be Double leafed.
Dimension: 1000 mm (W) X 1170 mm (H) X 450 mm (D)
2
-
-
Providing and fixing sofa type casual sitting made in solid wood/ ms frame with high back support and ply ledge arm support finished with 1mm laminate and edge lipping of similar shade. Sofa to be made with soft cushion sitting and back finished with fabric as/selection by Engineer incharge. Please refer 3d view attached in rft
2
-
-
Electrical Work
-
-
-
Supply, Installation, Testing & Commissioning of modular type Variable Refrigerant Flow/Variable Refrigerant Volume air cooled Outdoor units suitable for cooling and heating , having 100% hermetically sealed inverter type Scroll Compressor(s) with and minimum two compressors along with two Condensing fan microprocessor based Controller, Side / top discharge type condensing unit(s), with R-410 A Refrigerant, vibration isolators, with suitable foundation etc. complete as required. The unit shall deliver the rated capacity at AHRI Conditions and work even at 50°C ambient temperature without tripping. The unit shall be suitable to work on 400V +/- 10%, 3 Phase, 50Hz AC power supply. The unit shall be filled with first charge of the refrigerant and ready for use as required. The EER at 100% load with AHRI conditions shall not be less than 3.5 and Including OEM supplied Piping connection Kit etc. as required. All as per pre approved by Engineer in charge.
-
-
-
HEAT PUMP 12 HP CAPACITY (TOP -DISCHARGE , Suitable for cooling and Heating)
1
-
-
HEAT PUMP 14 HP CAPACITY (TOP -DISCHARGE , Suitable for cooling and Heating)
1
-
-
Supply, installation, testing and commissioning of following minimum capacity 4-way flow VRV/VRF Cassette Type Indoor ceiling mounted unit equipped with synthetic washable media pre-filter, fan section with low noise fan/dynamically balanced blower, multispeed motor, coil section with DX Copper coil, electronic expansion valve, outer cabinet, drain pump, grill, necessary supports, vibration isolation, Corded remote control etc., suitable for operation on single phase 230 V ± 10%, 50Hz AC supply, complete, as required. The unit shall have automatic force shut down valve in case of fire on receiving signal from BMS System. The cooling capacity of indoor unit will be at air inlet conditions of 27 Degree C DB and 19 Degree C WB temperature. (Make will be same as of Outdoor). All as per pre approved by Engineer in charge.
-
-
-
ROUND FLOW CASSETTE TYPE UNIT
-
-
-
3.98 TR CASSETTE WITH REFNET & WIREL LESS REMOTE
4
-
-
2.56 TR CASSETTE WITH REFNET & WIREL LESS REMOTE
1
-
-
Supply, installation, testing and commissioning of following minimum capacity VRV/VRF High wall type Indoor unit equipped with and comfort washable synthetic media pre-filter, fan section with low noise fan/dynamically balanced blower, multispeed motor, coil section with DX copper coil, electronic expansion valve, outer cabinet, cord less remote control, drain pan, necessary accessories etc., suitable for operation on 230 V ± 10%, 50 Hz, single phase AC supply, complete as required. The unit shall have automatic force shut down valve in case of fire on receiving signal from BMS System. The cooling capacity of indoor unit will be at air inlet conditions of 27 Degree C DB and 19 Degree C WB temperature. (Make will be same as of Outdoor) All as per pre approved by Engineer in charge.
-
-
-
HI-WALL TYPE UNIT
-
-
-
1.28 TR HI-WALL WITH REFNET & WIREL LESS REMOTE
6
-
-
0.80 TR HI-WALL WITH REFNET & WIREL LESS REMOTE
1
-
-
Communication Cable
-
-
-
Supplying and drawing flexible / stranded bare copper conductor, PVC / XLPE insulated, overall aluminium mylar tape shielded ATC drain wire and outer PVC sheathed industrial Instrumentation (shielded)cables voltage grade 300/500 V as per BS /EN 50288-7 in existing surface or recessed PVC/ MS conduit/casing capping / Cable tray / Open Duct making connections, testing etc. as required. OEM Must have its own in house NABL lab setup for all testing facilities for cables. All as per pre approved by Engineer in charge. For additional technical parameters of products/ work , refer Annexure "A" attached with Rajasthan PWD Electrical BSR 2022 . .
-
-
-
Armoured
-
-
-
2 core x 1.0 Sq.mm
150
-
-
Refrigerant Piping
-
-
-
Supply, installation , testing and commissioning of Interconnecting refrigerant copper pipe work suitable for R-410A refrigerant with closed cell elastomeric nitrile rubber tubular insulation between each set of indoor & outdoor units as per specifications, all piping inside the room.All piping shall be running on cable tray with properly supported with MS,GI HANGERS .All piping shall be pressure tested for 1.5 times the working pressure. . The refregerant pipes running in vertical shaft shall be supported on MS angle and wooden saddle at every 1200 mm distance and the pipes which are running horizontally above the false ceiling should be supported on MS angle/slotted angle at every 1200 mm distance.
-
-
-
Liquid Line including 13 mm closed cell nitrile rubber tubular insulation
75
-
-
Suction Line including 19 mm closed cell nitrile rubber tubular insulation.
75
-
-
Drain Piping
-
-
-
Providing & Fixing of IS : 4985 - 2000 Class -4 (10 Kgf / Sqcm) UPVC drain water piping with fittings (IS:7834 & 10Kgf/sqcm) like elbow, socket, Tee, solvent cement jointing, support with MS hanger on ceiling or recessed in wall with chasing & plastering with 6 mm thick closed cell elastomeric nitrile rubber insulation including leakage testing etc. as required of following Nominal sizes. All as per pre approved by Engineer in charge. For additional technical parameters of products/ work , refer Annexure "A" attached with Rajasthan PWD Electrical BSR 2022 . .
-
-
-
25 MM
40
-
-
32 mm
20
-
-
Supply, installation, testing & commissioning of Group controller for monitoring the status and working condition of all indoor and outdoor units, The controller shall act as an advanced air conditioning management system to given complete control of VRV/VRF air conditioning equipment with Starting/stopping of air-conditioning as a zone or group of individual units. Temperature setting for each Indoor units of zone, Switching between temperature control modes, switching of the fan speed and direction of airflow, enabling/disabling of individual remote controller operation, Alarm code display in case of any problem. It shall be able to control up to 64 (max. 512 if required) number of Indoor units. All as per pre approved by Engineer in charge. For additional technical parameters of products/ work , refer Annexure "A" attached with Rajasthan PWD Electrical BSR 2022 . .
1
-
-
Supply, installation, testing and commissioning of Cabinet type 2000 CFM capacity Rectangular Inline fresh air fans with motor complete motor complete with TEFC Sq. Cage Induction motor suitable for 415 volts ± 10%, 50Hz ± 3 %, Three phase A.C supply of class "F" insulation with , mountings accessories in all respect with wiring upto power supply point.
1
-
-
Supplying, installing, testing and balancing of extruded Aluminium Powder coated supply/return Grilles with fixed bars at front having 0 / 15 / 30 / 45 degrees deflection as required. with Flange size 20 mm with rounded edges including fixing with steel screws etc. complete in all respect. All as per pre approved by Engineer in charge. For additional technical parameters of products/ work , refer Annexure "A" attached with Rajasthan PWD Electrical BSR 2022 . .
0.2
-
-
Supplying, installing and balancing of extruded Aluminium powder coated fresh air inlet louvers with bird screen & volume control damper fixing with steel screws etc. complete in all respect. All as per pre approved by Engineer in charge. For additional technical parameters of products/ work , refer Annexure "A" attached with Rajasthan PWD Electrical BSR 2022 . .
0.2
-
-
Supply , installation, testing & balancing of 20 Gauge G I Damper with brass bushes and 6" pitch multiblade box type galvanised sheet steel construction volume control damper for Ducting and air washers to be provided with suitable links and quadrants for control of volume of air as per specifications complete as required. All as per pre approved by Engineer in charge. For additional technical parameters of products/ work , refer Annexure "A" attached with Rajasthan PWD Electrical BSR 2022 . .
0.3
-
-
P & F of Fire retardent flexible canvass connection made of fibreglass weave having silver grey silicon rubber coating, of height 200 mm with sufficient fold to avoid transmission of vibration with GI frame ,Gasket Nut Bolts for air cooling Plants/AHU/FCU etc as required. All as per pre approved by Engineer in charge. For additional technical parameters of products/ work , refer Annexure "A" attached with Rajasthan PWD Electrical BSR 2022 . .
0.4
-
-
Supply , Installation, Testing and Comissioning of site fabricated ducting made from GI sheet metal conforming to IS:277 with a zinc coating grade not less than 120 GSM
(both side inclusive) & fabricated as per IS:655 and as per approved drawings & designs including the cost of hangers, supports, angle, expansion fasteners , closed cell neoprene gasket T&P etc. as required of following thickness. Test Certificate for Galavanizing with lot no. to be submitted. All as per pre approved by Engineer in charge. For additional technical parameters of products/ work , refer Annexure "A" attached with Rajasthan PWD Electrical BSR 2022.
-
-
-
0.60 mm (24G)
30
-
-
0.80 mm (22G)
20
-
-
Water Cooler and RO
-
-
-
Supply , Installation, Testing and Comissioning of IS:1475 marked self contained drinking water cooler with hermetically sealed compressor,non CFC refrigerent suitable for operation on 230V/1pH/50Hz AC supply,Full stainless steel (SS304)body (0.8 mm thick) and tank (0.5 mm thick) , stainless steel water tray,minimum two nos Brass Chrome plated faucets and suitable drainage system complete in all respect with required height MS fabricated and Painted Angle iron frame ( Cost of frame to be paid Extra )complete in all respect of the following capacity. All as per pre approved by Engineer in charge. For additional technical parameters of products/ work , refer Annexure "A" attached with Rajasthan PWD Electrical BSR .
-
-
-
cooling capacity 40 Ltr./Hr. and storage capacity 80 Ltrs
1
-
-
Supply , Installation, Testing and Comissioning of RO water system with Filtration stage = Particilate filter-Membrane life enhancer filter - sediment filter - Pre carbon filter -RO Membrane filter - Post carbon filter, Input power Rating - 230 V AC, 50 HZ, Percentage of Rejection TDS - 90% or better having following features (a)Double purification by RO with ESS or latest technology with TDS indicator.(b)Spin welded RO Membrane Housing to prevent tempering.(c) Push fit components for leak proof performance (d) Fully automatic operation with auto start and auto off.( e )SS/ ABS construction for corrosion free lifespan.(f)Equally suitable for water from all bore wells, overhead storage tanks, water tankers and even municipal taps.(g)RO Membrane Flushing - Auto Flush@ Every Start, Every Stop and every One Hour of working for one minute. complete in all respect with following capacity Purification capacity- 25 LPH
1
-
-
WIRING
-
-
-
Wiring of light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq. mm nominal size FR PVC insulated unsheathed flexible copper conductor 1.1 kV grade and 1.5 sq. mm nominal size FR PVC insulated unsheathed flexible copper earth conductor 1.1 kV grade (IS:694) in recessed ISI marked MMS ( IS:9537 P - III ) virgin material PVC conduit & it's ISI marked (IS:3419-1988) accessories, round tiles, 1.2 mm thick Hot Dipped Galvanized Modular Box with earth terminal, 10A Modular switch,Modular face plate with grid plate, 3 pin ceiling rose / Holder /3 way connector, screws, making connections, testing etc. as required. For specification of copper Conductor, Phenolic Laminated sheet's & Electrical/ Wiring accessories refer Chapter E - 04, E - 05 & E - 07 For additional technical parameters of product / work refer Annexure 'A' attached with Rajasthan PWD Electrical BSR 2022 .
-
-
-
Short point (up to 3 mtr.)
7
-
-
Medium point (up to 6 mtr.)
15
-
-
Long point (up to 10 mtr.)
10
-
-
Wiring of 3 pin 6 amp. Light plug point with 1.5 sq. mm nominal size FR PVC insulated unsheathed flexible copper conductor 1.1 kV grade and 1.5 sq. mm nominal size FR PVC insulated unsheathed flexible copper earth conductor 1.1 kV grade(IS:694) of approved make in surface / recessed ISI marked MMS ( IS:9537 P - III ) PVC conduit & it's accessories, 18 SWG 175 mm x 100 mm x 60 mm M.S. box with earth terminal, 6 A switch, 6 A socket, 3.0 mm thick ISI marked phenolic laminated sheet, zinc plated / brass screws, cup washers, making connections, testing etc. as required.
-
-
-
On board
7
-
-
Wiring of Power plug point with 2.5 sq. mm nominal size FR PVC insulated unsheathed flexible copper conductor 1.1 kV grade and 2.5 sq. mm nominal size FR PVC insulated unsheathed flexible copper earth conductor 1.1 kV grade(IS:694) of approved make in surface / recessed ISI marked MMS ( IS:9537 P - III ) PVC conduit & it's accessories, 18 SWG 175 mm x 100 mm x 60 mm M.S. box with earth terminal, 16 A switch, 16 A socket, 3.0 mm thick ISI marked phenolic laminated sheet, zinc plated / brass screws, cup washers, making connections, testing etc. as required.
-
-
-
On board
8
-
-
Supplying and fixing of power plug point with Modular accessories as per specification for electrical Works, on hot dipped galvanized modular box of 18 SWG with earthing terminal/connector on surface or in recessed with suitable size of modular face place with grid plate and cover plate including cost of ISI marked modular 16 amp. Switch (IS :3854) and 3/5 pin 16 amp. socket outlet (IS:1293) , making connection , testing , etc. as required. All as per pre approved by Engineer in charge. For additional technical parameters of products/ work as per recommended makes of RFP.
9
-
-
S&F following sizes (dia.) of ISI marked virgin material MMS ( IS:9537 P - III ) PVC conduit along with ISI marked (IS:3419-1988) accessories as required in recess including cutting the wall, covering conduit and making good the same as required. For additional technical parameters of product / work refer Annexure 'A' attached with Rajasthan PWD Electrical BSR 2022 .
-
-
-
20 mm
69
-
-
25 mm
1300
-
-
32 mm
50
-
-
40 mm
30
-
-
Supply and fixing following size of Hot dipped Galvanized (275 GSM) floor raceways / Under floor trunking with/ without partion, including with base and cover, junction boxes , extension pieces, couplers, end plates, earthing including mechanically cutting chases in floor/ wall etc & making the same good with fixing alluminium profile cover . The race way shall be surface / Concealed type to brick wall / flooring with necessary fixing accessories .All as per pre approved by Engineer in charge. For additional technical parameters of products/ work , refer Annexure "A" attached with Rajasthan PWD Electrical BSR 2022 . .
-
-
-
GI Raceways
-
-
-
75 mm x 38 mm x 1.5 mm
40
-
-
Supply and fixing following Hot dipped Galvanized (275 GSM) accessories for floor raceways / Under floor trunking etc. as required.All as per pre approved by Engineer in charge. For additional technical parameters of products/ work , refer Annexure "A" attached with Rajasthan PWD Electrical BSR 2022 . .
-
-
-
Access Outlet 200 mm x 200 mm x 40-75 mm with Galvanized Lid
2
-
-
Supplying and drawing FR PVC insulated & unsheathed flexible copper conductor as per specification for electrical Works with ISI marked (IS:694) and as per IS 8130 : 2013 of 1.1 kV grade . Wire should be made from 99.99% purity copper, class 5 stranding in acc. to IEC 60228 for lower watt loss , oxygen free ( 10 ppm) for less chances of oxidization and higher silver content for gives better conductivity , insulation PVC type A ,flame retardant as per IS 10810-53, better amperage rating as per VDE 0298 part 4, , in existing surface or recessed PVC/ MS conduit/casing capping including all as per pre approved by Engineer in charge,making connections, etc. as required. as per recommended makes of RFP.
-
-
-
3x 1.5 sq.mm
102
-
-
2 x 2.5 sq. mm. + 1x1.5sqmm
510
-
-
2 x 4.0 sq. mm. + 1 x 2.5 sq. mm.
260
-
-
4 x 10.0 sq. mm. + 1 x 6.0 sq. mm. (DB and AC supply)
75
-
-
4 x 16.0 sq. mm. + 1 x 6.0 sq. mm. (VTPN supply)
30
-
-
DISTRIBUTION BOARDS
-
-
-
Providing & Fixing of 240/415 V AC MCB with positive isolation of 10 kA breaking capacity (B/ C/D tripping characteristic as per type of load and site requirement) 4 KV impulse withstand voltage, ISI marked IS 8828(1996) / conforming to IEC 60898-1 2002, IEC 60947-2, low watt losses, trip free mechanisum , energy limiting of class 3 as per IEC, minimum phase termination capacity of 35sq.mm. , conductor line load reversibility , IP 20 contact protection and fitted in existing distribution board/sheets, minimum electrical operation 20,000 upto 20 A rating and 10,000 upto 63 A, 5000 for 80 A & above rating including making connections, testing etc. as required. OEM shall have submit NABL / CPRI / ERDA accrediated lab type test reports & All as per pre approved by Engineer in charge. For additional technical parameters of product / work refer Annexure 'A' attached with Rajasthan PWD Electrical BSR 2022 .
-
-
-
Single pole MCB
-
-
-
6 A to 32 A rating
60
-
-
Double pole MCB
-
-
-
6 A to 32 A rating
3
-
-
Triple pole MCB
-
-
-
40 A 63 A rating
6
-
-
Four pole MCB
-
-
-
40 A rating
1
-
-
50-63 A rating
3
-
-
Providing & Fixing of 240/415 V Residual current circuit breaker (RCCB) conforming to (IS:12640-1)/ IEC 61008 -1 , rated 4 KV impulse withstand voltage truly current operated and shall operate on CBCT mechanisum, provision for pad lock, min. operation 10,000 upto 63 A rating and 5000 for 100 A rating and minimum phase termination capacity of 35 sq.mm. rigid wire , IP 20 contact protection with existing distribution board / sheet including making connections, testing etc. as required. OEM shall have submit NABL / CPRI / ERDA accrediated lab type test reports & All as per pre approved by Engineer in charge. For additional technical parameters of product / work refer Annexure 'A' attached with Rajasthan PWD Electrical BSR 2022 .
-
-
-
Two pole 100/300mA sensitivity
-
-
-
40 A rating
9
-
-
Four pole 100/300 mA sensitivity
-
-
-
40 A rating
1
-
-
63 A rating
2
-
-
Providing & Fixing of Recessed/surface mounting heavy duty horizontal type Double Door ( Metal / Glazed )Distribution board with Metal end box made out from Galvanized steel / CRCA sheet not less then 1.2 mm thick conforming to IS-8623-1 & 3 / IEC 61439- 1 & 3, powder painted complete with reversible door (for double door DB only )100 amp. insulated copper bus bar/shorting link , copper neutral link, copper earth link , color coded interconnecting wire set of suitable rating and din bar,masking sheet, making internal DB terminations with copper lugs, Ferrules, detachable gland plate, including making connections, testing etc. as required. OEM shall have submit NABL / CPRI / ERDA accrediated lab type test reports & All as per pre approved by Engineer in charge. For additional technical parameters of product / work refer Annexure 'A' attached with Rajasthan PWD Electrical BSR 2022 .
-
-
-
Metal Double door (single phase) IK-09 and IP-43 with Metal end box
-
-
-
12 Way (12+2)
1
-
-
Metal Double door (Three phase) Per phase isolation, Horizontal IK-09 and IP-43 with Metal end box
-
-
-
6Way(Incomer 8,Sub Incomer2+2+2)
1
-
-
8Way(Incomer 8,Sub Incomer2+2+2)
1
-
-
12 Way(Incomer 8,Sub Incomer2+2+2)
1
-
-
P&F recessed/ surface mounting heavy duty Vertical type 16 SWG sheet steel Distribution board with provision of incomer suitable for MCCB and SP / TP MCB as outgoing , phophatised ,powder painted complete with insulated suitable rating copper bus bar , neutral link, earth link and din bar, masking sheet & conforming to IS13032 & IS8623 including making internal DB terminations with copper lugs , testing etc. as required.
-
-
-
Double door IP-43 & IK-09 with Provision of Incomer MCCB 100/ 125 A Rating with Metal end box
-
-
-
6 Way
2
-
-
100 Amp, FP, 25 KA, MCCB, having Thermal Magnetic trip unit with adjustable overload , short circuit & earth fault protection
2
-
-
Electrical Panel
-
-
-
Supply, installation, testing & commissioning of cubicle type totally enclosed free standing dust & vermin proof L T metering panel made out of 2.0 mm thick and partition made out of 1.6 mm MS sheet steel, suitable for 3 phase , 4 wire , 415 V , 50 Hz , AC supply complete with incoming MCCB & outgoing MCB/ MCCB, All the MCCB should be with Rotary handle, Dual source electronic energy meter, Electrolytic grade Al busbar of required capacity, indication lamp etc complete as per drawing & enclosed specifications recommended makes. INCOMER : 200 Amp, FP,25 KA, MCCB having Thermal Magnetic release with short circuit and adjustable overload (0.7 to 1In ) protection - 1 no
3P+N Type2 SPD with inbuilt health indicator, response time 25 ns, Imax (8/20 µs) 8 KA, Voltage Protection Level 1.2 KV, shall be used at the incomer side of the panel with 32 Amp FP C curve MCB. - 1 no
BUSBAR: 300 Amp, FP, Electrolytic grade Al busbar for main MCB outing & feeders distribution, The Bus Bar section should be covered with withdrawable Acrylic sheet for protection.
OUTGOING : 125 Amp, FP, 25 KA, MCCB with neutral link, having Thermal Magnetic release with adjustable overload , & short circuit protection. ON/OFF TRIP, indication lamp - 1 nos 100 Amp, TP, 25 KA, MCCB with neutral link, having Thermal Magnetic release with adjustable overload , & short circuit protection. ON/OFF TRIP, indication lamp - 1 nos 100 Amp, FP, 25 KA, MCCB with neutral link, having Thermal Magnetic release with adjustable overload , & short circuit protection. ON/OFF TRIP, indication lamp - 1 nos
40 Amp, FP, 10KA, MCB, - 1 no
63 Amp, FP, 10KA, MCB, - 3 no
FOR SPARE
63 Amp, FP, 10KA, MCB, - 1 no
40 Amp, FP, 10KA, MCB, - 1 no
METERING SECTION DIGITAL LED Energy meter (32 samples/cycle) of rating with 3 nos 200/5A class 1 as per IEC 62053-21, CTs as per SLD, The Digital meter shall measure V /I /F /PF /KW / KVA /KVAR / KWH / KVAH / KVARH / MD / %THD parameters. The energy meter should have communication modbus RS 485 port & required hardware & software for communication, duly protected by 2A MCB - 1 nos
LED type RYB indication lamp duly protected by 2A MCB– 3 Nos.
1
-
-
Providing & Fixing of following modular accessories as per specification for electrical Works, made out of unbreakable and fire retardant vergin poly carbonate with brass terminals and captive screws & silver alloy contact tip with IP-20 rating , minimum width of 1 module switch toggle( PUSH PART ) should not less then 20mm, including all as per pre approved by Engineer in charge,making connections, testing etc. as required. All as per pre approved by Engineer in charge. as per recommended makes of RFP.
-
-
-
Blanking plate
10
-
-
Providing & Fixing of ISO certified company made vergin material PVC trunking system as per specification for electrical Works, with double lock feature for cable management including finishing accessories like corners, tee, adjustable angles, junction etc. as required . The trunking system shall have adaptable system for modular type RJ 45 data socket/ wiring accessories/ power sockets and shall be covered with peal off plastic cover. All as per pre approved by Engineer in charge. For additional technical parameters of products/ work as per recommended makes of RFP.
-
-
-
100/105mm x 50mm
10
-
-
32mm x 20 mm
10
-
-
Lighting
-
-
-
SITC of master LED tube light integrates a LED light source into a traditional fluorescent form factor.
Lumen Output - 2000 – 3000
Colour Temperature (K)- 3000 K to 6500K
LED’s life 25,000 hrs @ L70 CRI 70
Input Voltage Range (V) 150 - 270
LED Efficacy (lm/W) 150
Power Consumption (W) 20W to 32W.
6
-
-
Providing & Fixing of IP20, 2'x2' LED Surface/ Recessed mounting Mid power SMD type LED Light fixture not less than 50mm housing depth made from CRCA sheet steel housing, high purity / transmisivity UV stabilized Non -yellowish diffuser for uniform light distribution. High efficiency with 4 KV internal/external surge protection BIS certified isolated driver having efficiency 85% , with Short & Open circuit protection (Integral with light fixture). System lumen efficacy of ≥ 120 lm/Watt ,THD 10 % , p.f.≥0.95,CRI 80 , life time of minimum 50000 Burning Hours with , 70% of intial Lumen maintaned till life ends , CCT 3000°K / 4000°K / 5700°K /6000°K/6500°K (As per ANSI Bin) , maximum power consumption should not more than the specified rating and Fixture shall be of BIS standard and trade mark certificate ( T.C.). Manufactures Word Mark/ Name Engraved/ Embossing/ Screen printing on housing.
-
-
-
OEM must have its own in house NABL lab setup for all testing facilities for LED fixtures. (LM79 & LM80) certificate / Report from OEM shall be submitted. All as per pre approved by Engineer in charge. All as per pre approved by Engineer in charge. For additional technical parameters of products/ work , refer Annexure "A" attached with Rajasthan PWD Electrical BSR 2022 . .
-
-
-
Recessed Mounting
-
-
-
Minimum lumen output 3600 lm
3
-
-
Providing & Fixing of IP-20 LED Recessed / Surface Mounted, Round / Sqaure SMD Mid Power LED Downlight with power coated die-cast aluminum housing with UV Stabilized non yellowish Diffuser with BIS complience 2.5 KV surge protected Isolated driver, with Short & Open circuit protection, having efficiency 85% . System Lumen efficacy of ≥ 110 lm / watt, THD 10 % , Pf.≥0.95, CRI 80, life time of minimum 50000 Burning Hours with , 70% of intial Lumen maintaned till life ends , CCT 6500°K (As per ANSI Bin) , maximum power consumption should not more than the specified rating and Fixture shall be of BIS standard and trade mark certificate ( T.C.). Manufactures Word Mark/ Name Engraved/ Embossing/ Screen printing on housing. As per approved make of RFP
-
-
-
Recessed Mounting
-
-
-
Minimum lumen output 1950 lm
74
-
-
EARTHINGS
-
-
-
Plate Earthing as per PWD specification for electrical Works
as per IS:3043 with Hot dipped G.I. Earth plate of size 600mm x 600mm x 6.0mm by embodying 3 to 4 mtr. below the ground level with 20 mm dia. G.I. 'B' class watering Pipe ,including all accessories like nut, bolts, reducer, nipple, wire meshed funnel, and Heavy duty weather proof poly-propylene earth pit chamber with lockable Jam free lid suitable for safe working load 5000 Kg or more of size Top Dia. 225 to 260 mm, Bottom Dia 300 to 350 mm. and Height 250 to 300 mm. and embodying the pipe complete with alternate layers salt and coke/ charcoal, testing of earth resistance for value of 5 ohms or less as required & must record by engineer in charge during site visit and ensure to enter in measurment book. All as per pre approved by Engineer in charge. For additional technical parameters of products/ work , refer Annexure "A" Rajasthan PWD BSR.
2
-
-
Plate Earthing as per IS:3043 with copper Earth plate of purity 95% of size 600mm x 600mm x 3.0mm by embodying 3 mtr. below the ground level with 20 mm dia. G.I. 'B' class watering Pipe ,including all accessories like nut, bolts, reducer, nipple, wire meshed funnel, and Heavy duty weather proof poly-propylene earth pit chamber with lockable Jam free lid suitable for safe working load 5000 Kg or more of size Top Dia. 225 to 260 mm, Bottom Dia 300 to 350 mm. and Height 250 to 300 mm. and embodying the pipe complete with alternate layers salt and coke/ charcoal, testing of earth resistance for value of 5 ohms or less as required & must record by engineer in charge during site visit and ensure to enter in measurment book. All as per pre approved by Engineer in charge. For additional technical parameters of products/ work , refer Annexure "A" attached with Rajasthan PWD Electrical BSR 2022 . .
2
-
-
S & Laying following size earth wire/strip in horizontal or vertical run in ground/surface/recess on SMC insulator including riveting, soldering, saddles, making connection etc. as required.
-
-
-
8 SWG Cu wire
60
-
-
32mm x 6mm copper strip duly PVC sleeved
20
-
-
CABLING WORK
-
-
-
P/Laying P.V.C. insulated & P.V.C. sheathed armoured cable of 1.1 KV grade with aluminium conductor of IS:1554 P-I on cable tray, including cable termination, cable luges, cable gland, making connection, testing etc. as per specification, drawing & recommended make.
-
-
-
4 core 16 sqmm
30
-
-
3.5 core 50 sqmm
30
-
-
3.5 core 95 sqmm
30
-
-
Supply, Fabricating & installing following sizes of Hot dipped Galvanized iron cable tray ( Galvanized thickness not less then 50 microns) with rungs at span of 250mm including horizontal and vertical bends, reducers tees,cross members and other accessories as required and duly suspended from the ceiling/wall with M.S. suspenders etc. as required.All as per pre approved by Engineer in charge. For additional technical parameters of products/ work , refer Annexure "A" attached with Rajasthan PWD Electrical BSR 2022 . .
-
-
-
150mm x 50mm x 1.6mm
40
-
-
300mm x 50mm x 2mm
15
-
-
Supply, Installation, testing and commissioning of 20 KVA UPS with 3 phase input and 3 phase output with isolation transformer and as per the Technical specifications. Quoted rate shall be inclusive of required batteries of 30 minutes back up at full load, battery shall be with connecting cables, Battery rack, also include copper cable of required size for input supply from main panel and output supply to panel /VTPN DB and all complete as per drawings, technical specifications as per attached in RFP, SLD, relevant standards, and direction of Engineer in charge.
1
-
-
LAN Services:
-
-
-
DATA ,CCTV & TELEPHON WORK
-
-
-
SITC of 5 MP IR Fixed Dome Network Camera -1/2.7 inch Progressive Scan CMOS, 2592 × 1944 at 25fps, 2.8 mm Fixed lens, 0.003 Lux at F1.4, 0 Lux with IR on, ICR, ONVIF (PROFILE S, PROFILE G, PROFILE T), support H.265, H.264, MJPEG, 120db WDR, 3D Digital Noise Reduction, BLC, HLC, Three individually configurable stream, 12 VDC & PoE, IR range: 40m, Support on-board storage up to 256 GB (SD card not included), IP67, IK10, Edge Analytics- Line crossing detection, Intrusion detection, Motion detection, Region entrance detection, Region exiting detection, Scene change detection, Face capture, Video tampering, audio exception detection, False alarm reduction through human and vehicle target classification based on deep learning UL, CE, FCC For additional technical parameters of products/ work as per recommended makes of RFP. For additional technical parameters of products/ work as per recommended makes of RFP.
9
-
-
SITC of 32 Ch Smart Network Video Recorder : Connect Up to 32 IP Cameras, Dual OS, Up to 12 Megapixels Resolution, 2 HDMI at least 1 HDMI 4K, 2 VGA atleast 1 VGA 2MP Output , Support H.265, MJPEG, Incoming Bandwidth 320Mbps, Including 6 SATA Hard Disks of 6TB Capacity, ANR Technology, 8 SATA interfaces for 8 HDDs and capacity of each HDD upto 6TB, 3 × USB 2.0 at least 1 USB with 3.0, Alarm I/O 16/4, RS-485, RS-232, 2 RJ-45 10 /100/1000 Mbps self-adaptive Ethernet interface, Multiple network monitoring: Web viewer, CE, FCC, UL certified.
1
-
-
Supply & Installation of IP-20 & IK-08 , UL Listed Wall mounted Double Section Communication enclosure (Rack) made from powder coated (60 to 80 Micron) CRCA sheet, front sturdy sheet steel frame folded from one piece and welded with minimum 5mm toughened glass door,Vertical Mounting Rail 1.6 MM with 'U'Marking , with All round protective channel on the door aperture, lock integrated on front door, top and bottom cover with cable entry provision with gland plates, integrated side walls, 2 pair of 19" angles with wall mounting provision on wall. Accessories like: 1 No of 19" 1U Horizontal Cable manager, 1 No of 90 cfm 230V AC Fan with 1 mts long cable, mounting hardware , 1 No of 19" 1U, mountable socket strips with 5 nos of 16A universal sockets with 2 mts long power chord for supplying power to switches, fans etc along with earth continuity kit, indicator, moulded power supply cable. fixing on wall with Suitable Anchor fastner etc as required.All as per pre approved by Engineer in charge. For additional technical parameters of products/ work , refer Annexure "A" attached with Rajasthan PWD Electrical BSR 2022 . .
-
-
-
12 U Rack with Width 600 mm & Depth 400 mm + 100 mm
2
-
-
Supply & Installation of IP-20 & IK-08 , UL Listed Communication enclosure (Rack) made from powder coated (60 to 80 Micron) CRCA sheet,Vertical Mounting Rail 1.6 MM with 'U'Marking, front sturdy sheet steel frame folded from one piece and welded with 5mm toughened glass door, with All round protective channel on the door aperture, lock integrated on front door, top and bottom cover with cable entry provision with gland plates, integrated side walls, Set of 75 mm height 4 castors, 2 of which have brakes, Accessories like: 5 Nos of 19" 1U Horizontal Cable manager, 2 Nos of vertical cable managers, 1 no. Keyboard Tray, 4 Nos of 90 cfm 230V AC Fan with 1 mts long cable, mounting hardware , 2 No of 19" 1U, mountable socket strips with 8 nos of 16A universal sockets with 2 mts long power chord for supplying power to switches, fans etc along with earth continuity kit, indicator, moulded power supply cable complete in all respect. All as per pre approved by Engineer in charge. For additional technical parameters of products/ work , refer Annexure "A" attached with Rajasthan PWD Electrical BSR 2022 . .
-
-
-
17 U Rack with Width 600 mm & Depth 800 mm
1
-
-
Supply, Installation, & Testing of 19" 1U Rack Mounted/ surface mounted aluminum/ CRCA 1.2mm powder coated, multimode glass Fiber Optic Cable Patch panel/LIU loaded with flangless/screwable adapters for ST/E-2000/SC/LC/MT-RJ/PC type, It should have easy removable Top plate with push buttons, there should be a splice tray installed in the Patch panel/LIU which can handle the fiber cores, splice tray should be PC+ABS material, it should include accessories like mounting hardware, gormetts, heat shrink tubes/sleevs, screws, nuts to install the panel for rack/wallmount applications as per requirement complete in all respect. All as per pre approved by Engineer in charge. For additional technical parameters of products/ work , refer Annexure "A" attached with Rajasthan PWD Electrical BSR 2022 . .
-
-
-
Multi Mode LIU 6 Ports
2
-
-
Supply, Installation, & Testing of Indoor duplex Singlemode/Multimode patch cord (50/125 µm made of glass fiber optic with LSZH jacket, F8 2.0x4.1 mm, Multimode G652.D Mounted on both sides with ST/E-2000/SC/LC/MT-RJ/PC type Duplex connectors in acc. with IEC 61754-20. Zirconia (ceramic) ferrule with a PC polished endface geometry, connectors should be tuned in accordance with IEC 61755-3-1 and qualified in acc. with IEC 61753-1 for category U (uncontrolled environment, duplex clip and white plastic dust cover, should comply to delta IL 0.2 dB after 500 mating cycles, there should be an optional Visual coding, mechanical coding and lock protection on the patch cords which can be added on later stage. patch cords's performance should be acc. to IEC 61753-1 (Table A.12) as per latest ammendments of TIA/EIA 569B.3, as per requirements.All as per pre approved by Engineer in charge. For additional technical parameters of products/ work , refer Annexure "A" attached with Rajasthan PWD Electrical BSR 2022 . .
-
-
-
SITC of LC to LC, Bend-Insensitive, Single Mode Fiber Patch Cord, 1.6 mm Duplex, LSZH Sheath as per IEC 60332-3, 3 Mtr length
2
-
-
SITC of LC to LC, Bend-Insensitive, Multi Mode(OM4) Fiber Patch Cord, 1.6 mm Duplex, LSZH Sheath as per IEC 60332-3, 2 mtr length
6
-
-
Supply, Installation, OTDR Testing & Fusion Splicing of Fiber Multimode Pigtail (50/125 µm) made of glass fiber optic, should be fitted at one end with any one type of single ST/E-2000/SC/LC/MT-RJ/PC type connector in acc. with IEC 61754-20, as per latest ammendments of TIA/EIA 569 Standard Specification as per requirments complete in all respect. All as per pre approved by Engineer in charge. For additional technical parameters of products/ work as per recommended makes of RFP.
24
-
-
Supply, Drawing and Testing, of stranded Multi mode (50/125 µm) glass optic fiber cable, as per latest ammendments of TIA/EIA 568/ISO/IEC 11801:2011/ IEC 60794-1-2 E1, E3,E11, F1/ EN 50173-1/ EN 187 000/ IEC 60974-2, 2-20, 2-21/ ITU G.652D, construction of LSZH outer sheath cable, cable should be used for LAN and WAN back bones, . With its LSZH sheathing these cables should be ideal for indoor/outdoor installations in existing MS/PVC /HDPE Conduits/ slotted channels with ferruling at both ends for identification complete in all respect. All as per pre approved by Engineer in charge. as per recommended makes of RFP. (10 -G Cable)
-
-
-
6 core 10G glass optic fiber Cable)
50
-
-
Supply , Installation, Testing and Comissioning of Hot pluggable Small Form Factor Pluggable (SFP Module), 1000BASE-SX, 1.25/2.125G Fiber Channel, LC Type Duplex Connector, 850nm laser transmitter, Should support distance upto 500m on 50/125um of data rate upto 2.125 Gb/s on bi-directional data links. Should also support industrial temperature, should have metal enclosure for lower EMI. The transceiver should be ROHS Compliant. (For Each MM Fiber) all switches & related Fiber modules should be of same make & category for seamless integration with each other of Enterprise class, complete in all respect.All as per pre approved by Engineer in charge. For additional technical parameters of products/ work , refer Annexure "A" attached with Rajasthan PWD Electrical BSR 2022 . .
4
-
-
Supply , Installation, Testing and Comissioning of Hot pluggable Small Form Factor Pluggable (SFP Module), 1000BASE-SX, 1.25/2.125G Fiber Channel, LC Type Duplex Connector, 850nm laser transmitter, Should support distance upto 500m on 50/125um of data rate upto 2.125 Gb/s on bi-directional data links. Should also support industrial temperature, should have metal enclosure for lower EMI. The transceiver should be ROHS Compliant. (For Each SM Fiber) all switches & related Fiber modules should be of same make & category for seamless integration with each other of Enterprise class, complete in all respect.All as per pre approved by Engineer in charge. For additional technical parameters of products/ work , refer Annexure "A" attached with Rajasthan PWD Electrical BSR 2022 .
2
-
-
Supply , Installation and Testing of 4 pair, 100 Ohm impedance, Cat 6/6A patch cords should be constructed of minimum 23/24 AWG, stranded bare Copper cable with FRPVC/LSZH Jacket, with an enhanced performance by factory moulded RJ45 connectors as per ANSI/TIA/EIA 568 suitable for Cat 6/6A application complying to latest ammendments Category 6/6A Standards, According. to TIA568, minimum requirement for 1G BASE-T/ 10G BASE-T performance. Patch cords shall be straight thru cable compatible with both T568-A and T568-B wiring schemes, Minimum 750 to 1000 mating cycles in plug contacts for long durability complete in all respect. All as per pre approved by Engineer in charge. as per recommended makes of RFP.
-
-
-
Cat 6, UTP (Un-sheilded Twisted Pair) Patch Cord
-
-
-
1 Mtr
180
-
-
2 Mtr
4
-
-
Supply, Installation, Testing and Comissioning of Rack mounted 19" 1U, Cat6 24 Port loaded, 1.5-1.6 MM CRS chasis, powder coated, sheet steel, made of plastic (ABS), Modular Patch Panels with Rear Cable management system and mounting hardware to mount the patch panel. Should have port identification numbers printed/engraved on front of the panel. Etc. as required.All as per pre approved by Engineer in charge. For additional technical parameters of products/ work , refer Annexure "A" attached with Rajasthan PWD Electrical BSR 2022 . .
-
-
-
Modular Patch Panel Loaded with Cat -6 I/O
5
-
-
Supply , Installation, Testing and Comissioning of Managed Layer-2 Intelligent 10/100 Ethernet Switch providing 24 x 10/100/1000 MBPS Giga Ethernet ports / with min 2 SFP Giga Ports (provision for Fiber Giga connectivity) with related LAN Base Software including making connections etc as required.All as per pre approved by Engineer in charge. For additional technical parameters of products/ work , refer Annexure "A" attached with Rajasthan PWD Electrical BSR 2022 . .
3
-
-
SITC of Intelligent Ethernet POE Switches providing 24 x 10/100/1000 Fast Ethernet POE ports- 370W or better and 4 dual purpose uplink (provision for Copper / Fiber Giga connectivity) with provision of minimum Stacking of 06 Switches with related LAN Base Software . For additional technical parameters of products/ work as per recommended makes of RFP.
1
-
-
Supply, Drawing and Testing of 4 pair, 23 AWG Solid Bare Copper wire insulated with PVC, UTP (Unshielded Twisted Pair), Category 6, Class E, 100 Ohm Impedance, Indoor Cable as per latest ammendments of ANSI/TIA/EIA-568 , The copper conductors should be balanced twisted in pairs, seperated by a cross-member fluted pair divider & protected by PVC Jacket. Certified performance in a 4-connector configuration upto 100 Mtrs channel requirements & transmission frequencies up to 250 Mhz. in existing MS/PVC Conduits/casing capping including making connections to Information outlets and Patch Panels with jack & ferruling at both ends for identification with necessary tools for punching, stripping, crimping and testing etc as required complete in all respect. All as per pre approved by Engineer in charge. For additional technical parameters of products/ work as per recommended makes of RFP.
2000
-
-
Supply and Installation of unsheilded/ sheilded Information outlets made of high impact plastic body with ABS, FR Grade with provision for protection against dust in jack/ FP, suitable for Cat 6/6A application complying to latest ammendments, According. to Cat. 6/6A channel, It should support channel as well as components requirements of Cat.6/6A standards at frequencies of up to 250 to 500 Mhz. Cat 6/6A unshielded/shielded Jack should be suitable to terminate 4 pair, 23/24 AWG solid/stranded wire diameters, using 100 Ohm unshielded/shielded balance twisted pair cable, the jack should have tooless/impact punch termination on reliable copper tin plated Insulation displacement contact, It complied with ANSI/TIA/EIA 568 standard. In existing modular/MS Boxes along with necessory connections as required complete in all respect. All as per pre approved by Engineer in charge. For additional technical parameters of products/ work as per recommended makes of RFP.
-
-
-
Cat 6, Un-sheilded Information Outlet
5
-
-
Supply, Installation, Testing & Commissioning- 86" Professional touch Display with 350 nits or more brightness, Brightness: 350nits Multi Touch Point: 20 Points (Max.) Interface: HDMI (3), RGB (1), Audio In (1), RS-232C In (1), RJ45 (1), USB 3.0 Type A (3), USB 2.0 Type A (3), Audio Out / Optical Output, Touch USB (2), USB Block Mode , Panel Technology IPS , Back Light Type Direct Aspect Ratio 16:9 , Native Resolution 3840x2160 (UHD) Refresh Rate 60Hz ,Brightness 350nits Contrast Ratio 1,200:1 , Color Gamut NTSC 68% Viewing Angle(H x V) 178 x 178 , Life - time 30,000 Hrs. Color Depth 10bit, 1.07Billion colors Surface Treatment (Haze) Anti-Glare, 7H(Mohs) , Operation Hours (Hours/Day) 16/7 Orientation: Landscape , Air GAP 1mm Screen protection 7 Mohs , Input - Video / Audio HDMI (3), RGB / Audio In Input - External Control RS232C In, RJ45 Output - Video / Audio Audio Out / Optical Output , Internal Memory (32GB), SoC ( Dual core A73+Dual core A53), DDR(3GB), Wi-Fi(Built-in, Slot type), Power Indicator, Local Key Operation(1, Power button) Android 8 upgradable to android 11, CERTIFICATION :Safety CB / NRTL EMC FCC Class "A" / CE ErP / Energy Star- Yes, BIS.
Item
2
-
-
Supply, Installation, Testing & Commissioning- 50-inch Ultra HD screen with 400 nits’ brightness, Auto Signal Switching (Fail Over) 24x7 Running capacity, Life - time 30,000 Hrs. Horizontal and Vertical orientation, Remote Management with each display with the help of content management software, Display Sharing (Miracast), PIP, PBP, Group Manager, lifetime signage software Inbuilt Media Player with SOC, Quadcore processor with 8GB Internal memory Interface: HDMI / DVI / RS232C / RJ45 / Pixel Sensor / SD Card / USB.
1
-
-
Supply & Fixing of Dry Powder Agent (as per IS 4308:2019), ABC type Fire Extinguisher (Stored Pressure type) conforming to IS:15683:2018 , Powder coated Internal & External Surface Deep drawn cylinder body of Mild Steel CR2 grade conforming to IS: 513, Squeeze grip Forged brass release valve with Inbuilt safety release device, Diaphragm Type, 0 to 28 bar range pressure gauge, 450 mm long EPDM discharge tube, QR code for Product Traceability including Fixing on wall with suitable Anchor Fasteners as required of following capacity. Test Certificates of all the Parameters along with Hydro test & Burst test (For Cylinder Body) Certificate from OEM / External NABL Accrediated Lab is to be submitted. All as per pre approved by Engineer in charge. For additional technical parameters of products/ work , refer Annexure "A" attached with Rajasthan PWD Electrical BSR 2022 . .
-
-
-
6 kg
6
-
-
All in All maintence of the items including UPS system, VRV and Fresh air, Electrical Panels, DB , DB accessories, Earthing system , active and passive networking items and CCTV system etc. as per the manufacturer guidelines and as installed at site including consumables and spare parts.
-
-
-
1st Year after completion of 1 year Warranty period from date of completion of project
4
-
-
2nd Year after completion of 1 year Warranty period from date of completion of project
4
-
-
3rd Year after completion of 1 year Warranty period from date of completion of project
4
-
-
4th Year after completion of 1 year Warranty period from date of completion of project
4
-
-
Providing Electrician ITI with 2 Yr Exp. for operational and maintenance activities of building.
60
-
-
Evaluation Notes How It Works ?
Potential Partner
Select Your Requirements