Public Health Engineering Department Tender
... More
If you're looking for Rajasthan tenders online and are tired of typing tender ID over and again or going through the cumbersome government websites for it, you are in luck. We have collated every Eproc Rajasthan tender on BidAssist. And for any queries related to an e-tender Rajasthan, like bidding process, registration process, etc., are explained below. Read on.
Costs
EMD
₹ 53,72,000Document Cost
₹ 25,000Tender Fee
₹ 1,000
Description
Scription for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user
Contact
Tender Id
2021_PHCJO_224821_1Bid Award Id
ViewTender No
NIT NO. 16/2021-22Tender Authority
Public Health Engineering Department ViewPurchaser Address
-Website
http://https://phedwater.rajasthan.gov.in/
GEM & Bid Advisory Services
Get portal registration, tender bidding, product/service listing or vendor/MSME certification services at a nominal cost
Documents
BOQ Items
... More
(2.4.3) Add 15% extra on above item for drilling depth beyond 100 mtr, If depth
of Tube well is more than 100 mtr.
1440
-
994.75
... More
(2.3) Construction of Tube Well from ground level and upto 100 mtr. depth to accommodate housing and assembly pipe in all type of alluvium strata, unconsolidated formation such as pebbles, boulders etc. by percussion/ rotary drilling method as per IS:2800 Part 1: 1991 and IS:2800 Part II: 1979 (both amended upto date) and technical specifications for removal of overburden. The work includes the cost of lowering of casing pipe, but excludes the cost of casing pipe.
-
-
-
... More
(2.4.2) Nominal bore 200 mm dia.
200
-
989
... More
(2.4.3) Add 15% extra on above item for drilling depth beyond 100 mtr, If depth
of Tube well is more than 100 mtr.
160
-
1137.35
... More
(2.8) Testing verticality of tube well by plumbing system and yield test anddraw down test by pumping system as per IS : 2800 (Part - II) - 1979 asamended up to date.
20
-
7056
... More
(2.15) Supply & Installation of 3 phase ISi marked submersible motor pumpset of five star rating by BEE and as per JS: 8034-2011 (pump) and IS9283-2013 (motor) or amended up to date of approved make of followingduty condition with required accessories including making connectionsuitable for tube well/DCB. The job includes lowering of motor pump,
installation of complete fitting & accessories, jointing of electrical cablesup to switch board, testing of submersible pump set and interconnectionup to water mains, complete in all respect.
-
-
-
... More
(2.15.1) Up to 5.5 KW (7.5 HP) & head up to 120 mtr.
62.46
-
6920
... More
(2.22) S&F M.S. Clamps set of 50x6mm flat from iron with nuts and bolts etc. for holding the riser pipe assembly of submersible pump set.
40
-
450
... More
(2.19) Supply & Fixing of ISi marked three core PVC flat submersible cable asper IS 694: 1990 or amended up to date and conductor as per class 5 of IS8 130: 1980 includ ing making connection etc.
-
-
-
... More
(2.19.1) 3 core 4.0 mm2
5000
-
137
... More
(2.2) Providing and Laying of ISI Marked PVC insulated and PVC sheathed cables of 1.1 KV grade with aluminum conductor of IS 1554 category II and approved make of including excavation of 30cmx75cm side trench as per IS 1255, 25cm thick under layer of sand II class brick covering, refilling earth in the remaining portion making necessary connection including testing etc. of required size 4 core (category 1) make as mentioned in specification.
-
-
-
... More
(2.20.2) 16 Sqmm, 4 core
2000
-
191
... More
(2.24) Providing & Lowering in tubewell ISl marked GI Pipe "B" class as perIS: 1239 or amended up to date threaded and double flanged (welded) onboth ends and two number 25x3mm ms flat welded on both ends between pipe & flange, rubber washer & nut bolts etc. complete in all respect.
-
-
-
... More
(2.24.2) 50 mm dia
2400
-
489
... More
(2.11) Supply of ERW M.S. black casing pipe ISi marked (IS: 4270/2001) or
amended up to date of following sizes
-
-
-
... More
(2.11.2) 200 mm dia NB (Thickness of pipe 5.4mm & mass of tube 28.46 Kg/m)
685
-
1841
... More
(2.12) Labour charges for making slots on blank pipes made of ER W MS black pipe ISi marked of following sizes, the slotting should be as per IS:8110-2000 or as amended up to date.
-
-
-
... More
(2.12.2) 200 mm dia nominal bore.
240
-
180
... More
(T-15) Providing & fixing of ISI Marked GI Bend 90 degrees of following sizes including all jointing material “B” class.
-
-
-
... More
(T-15.1) 50 mm dia
60
-
300
... More
(2.32) Supplying & Installing 100 mm diameter sealed diaphragm bourdon typepressure gauge of range 0 to I 0 kg. including all jointing material as per specification with safety cover.
19
-
800
... More
(2.18) Supply and Fixing of electric control feeder panel comprising of suitablerating MCCB , fully automatic star-delta starter, over load relay, amperemeter with CTs, volt meter, phase preventor, suitable starting capacitorsphase indicators, lighting arrangement etc complete suitable for threephase pump set. The panel should have space for energy meter (supplied
by DISCOM). All these equipments shall be housed by panel box madeout from 18 guage M.S. Sheet with powder coating. Panel should be ofminimum size 900 x 600 x 450 mm with Stand ( made of angle iron ofsize 35x35x5mm) duly bolted/screwed with enclosure box having 4 legs,each leg's length 18" and double door including in built locking system.The legs should be embedded in M-15 cement concrete plat form.The size
of CC plateform should be equal or bigger than the base size of panelhaving height of at least 200 mm from ground level. The panel shouldhave opening of suitable size in front of space for energy meter with glassfor meter reading. The operation of panel should be suitable for on 440Volt AC Supply.
-
-
-
... More
(2.18.1) Above 5 HP and up to 10 HP
40
-
18290
... More
(2.3) Providing & Fixing of double flanged, Cl body, ISi marked NR V ofapproved make of following sizes
-
-
-
... More
(2.30.1) 65 mm dia
20
-
2160
... More
(2.23) Supply & Fixing tube well cover of MS sheet 8mm thick at top & Smmthick I OOmm wide shroud around the edge so as to form a cap on the topend of casing pipe with GI Nipple 45cm long & two GI flanges at bothend in 80mm sizes passing through a hole in the centre of MS sheet. A25mm socket with end plug shall also be welded over top plate (as perdrawillg enclosed). A GI nipple having outside thread of size 1/2" (for
installation pressure gauge) shall tie provided & welded with 80mm GInipple near top plate nipple shall be provided with end plug.
-
-
-
... More
(2.23.3) 200 mm dia
20
-
750
... More
(6.1.1.1) Providing, lowering, aligning, fixing in position in pipe line, CI D/F Sluice valves of approved make of following Pressure rating & dia complete, confirming to IS:14846 (amended up to date) and of following specifications: Body, Bonnet, Wedge, Gland, Thrust Plate, Cap & Hand wheel of Grey cast iron of IS:210/ FG200 Stem - SS 304 ,Body Seat ring, Wedge facing ring & Bushes - LTB2/ SS , Face to face dimensions as per IS 14846/2000 (amended up to date), All exposed machined ferrous surfaces shall be painted with one coat of aluminium red oxide primer conforming to IS:5660 and two coats of black Japan paint conforming toType B of IS 341or paint conforming to IS9862 or IS2932( Non-Toxic- suitable for drinking water) applied inside and outside, Flanges Drilled as per IS 1538.Nut-Bolt confirming to IS:1363 and IS: 1367/ CS/ galvanised steel.Insersion rubber of black EPDM 6mm thick . Suitable support structure as per directions of EIC. Sluice valves including all jointing & jointing material, labour, testing and commissioning along with pipe line as per Technical Specifications and as per direction of Engineer-in- charge.
Note: Rates are exclusive of tail piece/ dismantling joints and earth work. Manually Operated CI Sluice valve of Class PN-1.0 80 mm HW
20
-
4695
... More
(6.1.1.2) 100mm HW
4
-
6468
... More
Providing, laying and jointing of Rising main (Rates are based on PHED SOR 2020)
-
-
-
... More
(SOR PIPE LINE 2020) Providing, lowering, laying in trenches, aligning, fixing in positionand jointing Ductile Iron (DI) ISi marked K-7 grade S&S pipesas per 15:8329-2000 (amended upto date), with internal cement
mortar lining suitable for potable water with rubber ring (EPDM)joints as per IS: 5382- 1985 including all taxes (Central and local),transportation and freight charges, inspection charges, loading/unloading charges, including cost of labour and material, specials(Tee, bend etc.) satisfactory hydraulic testing, disinfection etc.complete as per technical specifications and direction of Engineer- incharge. (excluding earth work)Note : Providing and fixing of all requisite specials as per drawing,design and layout are inclusive in RM measurement of the item andshall not be paid separately.
-
-
-
... More
(1.1.1) 80 mm
3710
-
1084
... More
(1.1.2) 100mm
13012
-
1145
... More
(1.1.3) 150 mm
9645
-
1644
... More
(1.4) Providing, lowering, laying and jointing in trenches, standard lengths HDPE ISI marked Pipes as per IS-4984: 1995 (amended upto date) with necessary jointing material like mechanical connectors, i.e. thread/ insert joint/ quick release coupler joint/ compression fitting joint or flanged joint and specials jointing pipe by electro fusion welding method, including all taxes , transportation and freight charges, inspection charges, loading/ unloading charges, stacking of pipes, including cost of labour and material, specials (Tee, bend etc.), satisfactory hydraulic testing, disinfection etc. complete as per technical specifications and direction of Engineer-in-charge of following class and diameter. (excluding earth work) .
Note : Providing and fixing of all requisite specials as per drawing, design and layout are inclusive in RM measurement of the item and shall not be paid separately.
Supply may be in coil or straight length in 6 M/12 M.
-
-
-
... More
(1.4.3) HDPE PE-80 PN-10
-
-
-
... More
(1.4.3.1) 90 mm dia
11150
-
333
... More
(1.4.3.2) 110 mm dia
-
-
-
... More
(1.4.3.3) 125mm dia
3100
-
689
... More
(4.1) Earth work in excavation by mechanical means (Hydraulic Excavator )/ manual means in trenches for water supply pipe lines, shoring and strutting if required as per required gradient and line including safety provisions using site rails and stacking excavated stuff including up to all required lead cleaning the site etc. complete for lifts up to 1.5 depth and strata as specified. The work also includes depositing and refilling of trench with watering & ramming /compacting in layers and disposal of surplus excavated soil as directed for lead up to 50 mtr.
-
-
-
... More
In soft Rock
-
-
-
... More
(4.1.2.2) For dia of pipe up to 150 mm nominal, for HDPE pipe dia above 110
& up to 140 mm.
32326.4
-
253
... More
In Hard Rock ( Blasting prohibited)
-
-
-
... More
(4.1.3.1) For dia of pipe above 150 mm and up to 350 mm nominal.
8290.6
-
757
... More
(11.1) SITC of D/F Full bore type Electromagnetic Flow Meter of approved make of following dia and specifications complete: Media : Water (Raw/ Chlorinated) , Pressure : up to 1.5MPa, Process temp: - 50 deg C, Flow/Meter Tube : SS 304, Electrode : SS AISI 316L / Hastelloy C276/ Tantalum, Lining Material : Hard Rubber/ Neoprene / Poly-urethane (PU)
, Flange : SS / CS, Flange Standard & Rating : ANSI 150, Coil housing : SS AISI 304/ Carbon Steel/ Die Cast Aluminium, with anticorrosive paint & provide completely sealed (leak proof) construction as per requirement of IEC 60529, Accuracy : ± 0.5 % M.V.- velocity 0.3 to 10 m/s, Transmitter/ signal convertor Enclosure : Die Cast Aluminium, Power Supply : 80-240 V AC - 50Hz, Output 1 : 4-20 mA, Output 2: Pulse, Communication Output : RS 485/ Heart, Display Type : LCD/ LED Display, Cable Entry : M20 X 1.5, Provision of RAM/PROM to store calibration and configuration parameters and totalizer value during power failure, Protection category- IP 68 for sensor (flow tube) and IP 67 for transmitter/ convertor, including Surge Arrester, if required, and all materials required for making connection with existing pipeline including cutting the existing pipeline etc. complete in all respect as per technical specification and as per direction of Engineer In-Charge.
Note: Rates are exclusive of tail piece / dismantling joints and earth work.
-
-
-
... More
(40546) EFM100 mm
20
-
87889
... More
(SOR PIPE LINE 2020) Providing, lowering, laying, aligning, fixing in position and jointing at all level/depth S&S standard special with rubber ring(EPDM) joints as per SI:5282-1985 such as tees, bends, tapers, caps etc. within trenches in DI pipe line complete including all material, labour testing and commissioning along with pipe line as per technical specifications and direction of Engineer-in- charges :
-
-
-
... More
(1.3.1) A/S Tee, Bend, Reducer(All End Socketed)
-
-
-
... More
(1.3.1.1) Upto 300 mm Diameter
4180
-
121
... More
(6.5) Providing, lowering, aligning, fixing in position and Jointing in pipe line, CI single Air Valve Flanged/ Screwed type of approved makes for following pressure rating & dia complete, confirming to IS: 14845-2000 (amended upto date) and of following specifications: Body , Cover and Cowl - Grey Cast Iron as per IS:210- FG 200 ,Float - Stainless Steel AISI 304 / IS: 3444 ,Float Guide- HBT1,Body seat ring - Leaded tin bronze/ SS
, Seal ring and face ring - EPDM/NBR, Ends flanged according to IS:6418 or screwed type shall have external pipe threads conforming to IS:554, Fasteners - CS. All exposed machined ferrous surfaces shall be painted with one coat of aluminium red oxide primer conforming to IS:5660 and two coats of paint conforming to IS:9862 or IS:2932( Non-Toxic- suitable for drinking water) applied inside and outside. Valves including all material, labour, testing and commissioning as per Technical Specifications and as per direction of Engineer in charge.
Note: Rates are exclusive of connecting tee, pipe piece and earth work.Class PN 1.0
-
-
-
... More
(6.5.1.2) 25 mm S-1 Type
33
-
2352
... More
(6.1) Providing, lowering, aligning, fixing in position in pipe line, CI D/F Sluice valves of approved make of following Pressure rating & dia complete, confirming to IS:14846 (amended up to date) and of following specifications: Body, Bonnet, Wedge, Gland, Thrust Plate, Cap & Hand wheel of Grey cast iron of IS:210/ FG200 Stem - SS 304 ,Body Seat ring, Wedge facing ring & Bushes - LTB2/ SS , Face to face dimensions as per IS 14846/2000 (amended up to date), All exposed machined ferrous surfaces shall be painted with one coat of aluminium red oxide primer conforming to IS:5660 and two coats of black Japan paint conforming toType B of IS 341or paint conforming to IS9862 or IS2932( Non-Toxic- suitable for drinking water) applied inside and outside, Flanges Drilled as per IS 1538.Nut-Bolt confirming to IS:1363 and IS: 1367/ CS/ galvanised steel.Insersion rubber of black EPDM 6mm thick . Suitable support structure as per directions of EIC. Sluice valves including all jointing & jointing material, labour, testing and commissioning along with pipe line as per Technical Specifications and as per direction of Engineer-in- charge.
Note: Rates are exclusive of tail piece/ dismantling joints and earth work.Manually Operated CI Sluice valve of Class PN-1.0
-
-
-
... More
(6.1.1.1) 80 mm HW
4
-
4695
... More
(6.1.1.2) 100 mm HW
71
-
6468
... More
(6.1.1.4) 150 mm HW
39
-
10205
... More
(6.1.1.5) 200 mm HW
2
-
16802
... More
(4.4) Providing and laying in position cement concrete 1:4:8 (1 Cement : 4 coarse sand : 8 graded stone aggregate 40 mm nominal size) in base course complete including all material, labour, machinery, lighting, guarding for road restoration work in trenches of pipe line and chamber work. Measurement for CC work to be made as per standard trench width specified in tender document and no extra payment shall be made for trench width more than specified, complete work as per technical specification and scope of work.
324.38
-
3452
... More
(B/3.2.3) Providing and laying in position cement concrete in specified grade over prepared base course complete including finishing, curing, all material, labour, machinery, lighting, guarding for road restoration work in trenches of pipe line and chamber work. Measurement for CC work to be made as per standard trench width specified in tender document and no extra payment shall be made for trench width more than specified, complete work as per technical specification and scope of work.M20 grade Nominal Mix
1: 1.5: 3 (1 cement : 1.5 coarse sand : 3 graded stone aggregate 20mm nominal size).
278.75
-
5138
... More
(B/6.1.5) R/R store masonry in cement sand mortar (1:4) for foundation and plinth above 30 cm thick wall
125
-
2898
... More
(4.5.1) Providing and laying in position cement concrete in specified grade over prepared base course complete including finishing, curing, all material, labour, machinery, lighting, guarding for road restoration work in trenches of pipe line and chamber work. Measurement for CC work to be made as per standard trench width specified in tender document and no extra payment shall be made for trench width more than specified, complete work as per technical specification and scope of work.M20 grade Nominal Mix
1: 1.5: 3 (1 cement : 1.5 coarse sand : 3 graded stone aggregate 20mm nominal size).
45.63
-
5138
... More
(4.2) Dismantling of cement concrete pavement for pipe line and chambers by mechanical means using pneumatic tools, cutting the peripheral edge by CC cutter, breaking to pieces not exceeding 0.02 cum in volume and stock piling at designated locations and disposal of dismantled materials up to a lead of 1000 meters. Measurement for dismantled trench to be made as per standard trench width specified in tender document and no extra payment shall be made for trench width more than specified, re-handling of material/earth to complete the tasks as per technical specification and scope of work.
648.75
-
802
... More
Pumping Machinery (Rates are based on PHED SOR 2020)
-
-
-
... More
(PHED SOR 2020/5.1) Providing, installation, testing and commissioning of Centrifugal Monoblock pump set conforming to IS 9079 operating at sync. speed 2900 RPM with requisite MOC impeller, priming funnel, cock, suitable flanges at suction and delivery side. Pump shall have common shaft for pump and motor. Motor shall be suitable for working on 415 V ± 10%, 3 Ph, 50 Hz
A.C. Supply. Motor shall be TEFC type and Pump set shall be suitable for working at various discharge and head requirements as per scope of work. Pump shall be erected on C.C. foundation / cross channels / RSJ frame block with suitable foundation bolts grouted in C.C. foundation block etc. complete in all respect as per specification, scope of work and direction of Engineer in Charge of following power rating, suitable for prescribed duty conditions of one of the makes approved by Technical Committee.
-
-
-
... More
(5.1.1) Centrifugal Monoblock Pump set (Single Stage)
-
-
-
... More
(5.1.1.2) 5.0 HP
2
-
32943
... More
(5.1.1.3) 7.5 HP
6
-
40926
... More
(5.1.2) Centrifugal Monoblock Pump set (Double Stage)
-
-
-
... More
(5.1.2.1) 5.00 HP
4
-
37082
... More
(5.1.2.2) 7.5 HP
18
-
47086
... More
(5.1.2.3) 10 HP
4
-
56061
... More
(5.1.2.5) 15 HP
2
-
68805
... More
(7.2) SITC STAR DELTA Starter type LT Panel of following rating: all switchgears are of PHED approved makes, CRCA sheet of Panel enclosure is of TATA/ Essar 1.6mm/ 2.0mm thick duly Electrostatic Powder Coated with angle frame including other ancillaries ( Insulators, Acrylic Sheet , Baklight Sheet, Hardware, Wire, Name Plates, Lugs, Pvc Channel , Mcb Chanel
, Lock, Hing , Bidding , Connectors, Netural Links , Sprial , Saddle & Packing Material ) etc. and 100A/ 125A ,TPN, Aluminum Bus Bar with Colour coated heat shrinkage sleeves complete as per Technical Specifications and as per direction of Engineer-In-Charge.
-
-
-
... More
(7.1.2) DOL STARTER 5 HP - (1W+ 1S): I/C - MCB 32A ,FP,
10 KA, C Curve (1) , Analog Voltmeter 96*96mm ( 0-500V ) (1), Volt Selector Switch (1) , Analog Ammeter 96*96mm ( 0-60A ) (1), Amp. Selector Switch (1), C. T. 30/5A CL 1.0 5VA (3) , Indicating Lights ( Red- 1, Yellow -1) (2), Indicating Lights ( Blue - 1 ) (1), Control MCB 6A SP 10 KA C Curve (3) and
O/G- MCB 25A ,TP, 10 KA, C Curve (2), Power Cont 12A TP AC3
Duty(2), 2 NO+2 NC Aux. Block(2), Thermal Overload Relay (7-10A )(2), Control MCB 6A SP 10 KA C Curve (2), Single Phase Priventer (2), Indicating Lights (Red- 1, Green - 1, Amber-1)(6), Push Button 22.5 ( Red
- 1, Green - 1 )(4), Selector Switch 1 Pole, 2 Way (2), Capacitor 440VAC Heavy Duty MPP Type 2 Kvar (2)
3
-
45954
... More
(7.1.3) DOL STARTER 7.5HP - (1W+ 1S) :
I/C - MCB 40A ,FP, 10 KA, C Curve (1) , Analog Voltmeter 96*96mm ( 0-500V ) (1), Volt Selector Switch (1) , Analog Ammeter 96*96mm ( 0-60A
) (1), Amp. Selector Switch (1), C. T. 30/5A CL 1.0 5VA (3) , Indicating Lights ( Red-1, Yellow -1) (2), Indicating Lights ( Blue - 1 ) (1), Control MCB 6A SP 10 KA C Curve (3)
and O/G- MCB 25A
,TP, 10 KA, C Curve (2), Power Cont 12A TP AC3 Duty(2), 2 NO+2 NC
Aux. Block(2), Thermal Overload Relay (7-10A )(2), Control MCB 6A SP 10 KA C Curve (2), Single Phase Priventer (2), Indicating Lights (Red- 1,
Green - 1, Amber-1)(6), Push Button 22.5 ( Red - 1, Green - 1 )(4), Selector Switch 1 Pole, 2 Way (2), Capacitor 440VAC Heavy Duty MPP Type 2 Kvar (2)
12
-
47125
... More
(7.2.3) STAR DELTA STARTER 10.0 HP - (1W+ 1S): I/C - MCB 63A ,FP, 10 KA,
C Curve (1) , Analog Voltmeter 96*96mm ( 0-500V ) (1), Volt Selector Switch (1)
, Analog Ammeter 96*96mm ( 0-60A ) (1), Amp. Selector Switch (1), C. T. 60/5A CL 1.0 5VA (3) , Indicating Lights ( Red-1, Yellow -1) (2), Indicating Lights ( Blue - 1 ) (1), Control MCB 6A SP 10 KA C Curve (3) and
O/G- MCB 32A ,TP, 10 KA, C Curve (2), Power Cont 18A TP AC3 Duty(2), 2
NO+2 NC Aux. Block(2), Thermal Overload Relay (7-10A )(2), Control MCB 6A SP 10 KA C Curve (2), Single Phase Priventer (2), Indicating Lights (Red- 1, Green - 1, Amber-1)(6), Push Button 22.5 ( Red - 1, Green - 1 )(4), Selector Switch 1 Pole, 2 Way (2), Capacitor 440VAC Heavy Duty MPP Type 5Kvar (2), S/D Timer(2)
2
-
57390
... More
(7.2.3) STAR DELTA STARTER 15.0 HP - (1W+ 1S): I/C - MCB 63A ,FP, 10
KA, C Curve (1) , Analog Voltmeter 96*96mm ( 0-500V ) (1), Volt Selector Switch (1) , Analog Ammeter 96*96mm ( 0-60A ) (1), Amp. Selector Switch (1), C. T. 60/5A CL 1.0 5VA (3) , Indicating Lights ( Red- 1, Yellow -1) (2), Indicating Lights ( Blue - 1 ) (1), Control MCB 6A SP 10 KA C Curve (3) and
O/G- MCB 40A ,TP, 10 KA, C Curve (2), Power Cont 25A TP AC3
Duty(2), 2 NO+2 NC Aux. Block(2), Thermal Overload Relay (9-13A )(2), Control MCB 6A SP 10 KA C Curve (2), Single Phase Priventer (2), Indicating Lights (Red- 1, Green - 1, Amber-1)(6), Push Button 22.5 ( Red
- 1, Green - 1 )(4), Selector Switch 1 Pole, 2 Way (2), Capacitor 440VAC Heavy Duty MPP Type 7.5Kvar (2), S/D Timer(2)
1
-
62327
... More
Providing, lowering, aligning, fixing in position and jointing CI dismantling joint (Suitable for Sluice valves etc.) as per IS specifications complete of the following sizes including all jointing material, cost of all labour, testing and commissioning and as per technical specifications and direction of Engineer In-Charge. Class PN 1.0/1.6
-
-
-
... More
(6.17.2) 100 mm dia.
40
-
2688
... More
(6.17.4) 150 mm dia.
22
-
4219
... More
(2.15) Supply & Installation of 3 phase ISi marked submersible motor pumpset of five star rating by BEE and as per JS: 8034-2011 (pump) and IS9283-2013 (motor) or amended up to date of approved make of followingduty condition with required accessories including making connectionsuitable for tube well/DCB. The job includes lowering of motor pump,
installation of complete fitting & accessories, jointing of electrical cablesup to switch board, testing of submersible pump set and interconnectionup to water mains, complete in all respect.
-
-
-
... More
(2.15.1) Up to 5.5 KW (7.5 HP) & head up to 120 mtr.
182.77
-
6920
... More
(2.18) Supply and Fixing of electric control feeder panel comprising of suitablerating MCCB , fully automatic star-delta starter, over load relay, amperemeter with CTs, volt meter, phase preventor, suitable starting capacitorsphase indicators, lighting arrangement etc complete suitable for threephase pump set. The panel should have space for energy meter (supplied
by DISCOM). All these equipments shall be housed by panel box madeout from 18 guage M.S. Sheet with powder coating. Panel should be ofminimum size 900 x 600 x 450 mm with Stand ( made of angle iron ofsize 35x35x5mm) duly bolted/screwed with enclosure box having 4 legs,each leg's length 18" and double door including in built locking system.The legs should be embedded in M-15 cement concrete plat form.The size
of CC plateform should be equal or bigger than the base size of panelhaving height of at least 200 mm from ground level. The panel shouldhave opening of suitable size in front of space for energy meter with glassfor meter reading. The operation of panel should be suitable for on 440Volt AC Supply.
-
-
-
... More
(2.18.1) Above 5 HP and up to 10 HP
29
-
18290
... More
(1.21) providing,lowering,laying,aligning,fixing,in positionlevel/depthCI class B special as per IS :1538amendment up to date in trences complete including all material,labour,testing and commissioning along with pipeline appuratences as per Technical specification and as per direction of Engineer. Note: E/W to be measured and paid separately.
-
-
-
... More
(1.21.2) Double Flanged CI pipe fittings.
-
-
-
... More
(1.21.2.1) Up to 300 mm dia
9000
-
92
... More
(2.2) Supply & Fixing XLPE insulated / P.V.C. sheathed cable of 1.1 KV grade with aluminium conductor Armoured of IS:7098-I/1554-1 approved make in ground as per IS:1255 including excavation of 30cmx75cm size trench, 25 cm thick under layer of sand, second Class bricks covering, refilling earth, compaction of earth, making necessary connection, testing etc. as required of size.
-
-
-
... More
(2.20.1) 10.0 Sq.mm, 4 core
-
-
-
... More
(2.20.2) 16.0 Sq.mm, 4 core
1500
-
191
... More
(2.19) Supply & Fixing of ISI marked three core PVC flat submersible cable as per IS 694:1990 or amended up to date and conductor as per class 5 of IS 8130:1980 including making connection etc.
-
-
-
... More
(2.19.1) 3 core 4.0 Sq.mm
900
-
137
... More
(2.19.2) 3 core 6.0 Sq.mm
-
-
-
... More
(2.21) Plate Earthing as per IS:3043 with G.I. Earth plate of size 600mm x 600mm x 6.0mm by embodying 3 to 4 mtr. below the ground level with 20 mm dia. G.I. 'B' class watering Pipe including all accessories like nut, bolts, reducer ,nipple, wire meshed funnel, and C.C. finished chamber covered with hinged type with locking arrangement C.I. Cover, C.I. Frame of size 300mm x 300mm complete with alternate layers of salt and coke/charcoal, testing of earth resistance as required.
36
-
2800
... More
(2.32) Supplying & Installing 100 mm diameter sealed diaphragm bourdon type pressure gauge of range 0 to 10 kg. including all jointing material as per
specification with safety cover.
36
-
800
... More
(6.1) Providing, lowering, aligning, fixing in position in pipe line, CI D/F Sluice valves of approved make of following Pressure rating & dia complete, confirming to IS:14846 (amended up to date) and of following specifications: Body, Bonnet, Wedge, Gland, Thrust Plate, Cap & Hand wheel of Grey cast iron of IS:210/ FG200 Stem - SS 304 ,Body Seat ring, Wedge facing ring & Bushes - LTB2/ SS , Face to face dimensions as per IS 14846/2000 (amended up to date), All exposed machined ferrous surfaces shall be painted with one coat of aluminium red oxide primer conforming to IS:5660 and two coats of black Japan paint conforming toType B of IS 341or paint conforming to IS9862 or IS2932( Non-Toxic- suitable for drinking water) applied inside and outside, Flanges Drilled as per IS 1538.Nut-Bolt confirming to IS:1363 and IS: 1367/ CS/ galvanised steel.Insersion rubber of black EPDM 6mm thick . Suitable support structure as per directions of EIC. Sluice valves including all jointing & jointing material, labour, testing and commissioning along with pipe line as per Technical Specifications and as per direction of Engineer-in- charge.
Note: Rates are exclusive of tail piece/ dismantling joints and earth work.
-
-
-
... More
(6.1.1) Manually Operated CI Sluice valve of Class PN-1.0
-
-
-
... More
(6.1.1.2) 100 mm HW
68
-
6468
... More
(6.4) Providing, lowering, aligning, fixing in position in pipe line, CI double flanged Dual plate check valve of approved make of following Pressure rating & dia complete, as per API: 594/ API: 598 and of following specifications: Body & Cover of Grey cast iron of IS:210/ FG200 , Disc / plates - Cast steel ,Disc seal ring of EPDM/ NBR (food grade quality), Body seat of SS ,Face to face dimensions as per API: 594, Flanges Drilled as per IS:1538. All exposed machined ferrous surfaces shall be painted with one coat of aluminium red oxide primer conforming to IS:5660 and two coats of black Japan conforming toType B of IS:341or paint conforming to IS:9862 or IS:2932( Non-Toxic- suitable for drinking water) applied inside and outside. Shaft/Stop Pin of SS- AISI- 304/410 , Hinge SS AISI 316/304 / CS ,Spring SS AISI 316/304 , Bonnet Gasket EPDM, Bush- Brass with EPDM/NBR "O "ring seal.Nut-Bolt confirming to IS:1363 and IS: 1367 (galvanised steel) ,Insersion rubber of black EPDM 6mm thick . Suitable support structure as per directions of EIC including jointing & jointing material, labour, testing and commissioning along with pipeline as per Technical Specification & as per direction of Engineer-in-charge.
Note: Rates are exclusive of tail piece/ dismantling joints and earth work.
-
-
-
... More
(6.4.1) Class PN 1.0
-
-
-
... More
(6.4.1.2) 100 mm dia
36
-
5790
... More
Construction & Commissioning of Reservoir (Rates are based on PHED SOR 2020)
-
-
-
... More
(1) Construction of RCC INTZE type over Head Service Reservoir fo Following Capacity and Staging consisting of excavation in all types of strata, RCC Work, cement plaster with water proofing compound to inner face of the container including refilling disposing off the surplus stuff, plinth protection, all labour and material charges including provinding and fixing of accessories such as ladder,manhole frame and covers, water level indicatore (float type), ventilator with SS scren, lightening arrestor, float valves, provinding and applying three coats of cement paint to the external surface and giving satisfactory hydraulic test and water tightnees test as per I.S. code, etc. complete in all respect as per desing data, critera, obligatory requirements and detailed specifications, scope of work and GA drawing. The job includes painting the name of the schemes and other details on the reservoir, provindg alluminium portable ladder suitable to reach at height of 4.5 Mtr and any other work related to structure as per the directions of Engineer-in- Charge, Technical Specification and scope of work. 250 KL
-
-
-
... More
The rate indicated below are excluding th cost of pipes, specials and valve required for inlet, washout, overflow and bypass arrangement
-
-
-
... More
(2.1) 100 KL capacity
700000
-
20.84
... More
(2.2) For foundation on SBC 7 MT/sqm applicable for SBC more than or equal to 7MT/sqm and less than 10 MT/sqm, add 5%
700000
-
1.04
... More
(3.2.2.1) Rate for RCC OHSR, SBC 10T/Sqm, seismic zone II and Staging 18 Mtr.150 KL /18 MT CAPACITY
1050000
-
18.08
... More
(3.2.1.2) For foundation on SBC 7 MT/sqm applicable for SBC more than or equal to 7 MT/sqm and less than 10 MT/sqm, add 5%
1050000
-
0.9
... More
(3.2.2.1) Rate for RCC OHSR, SBC 10T/Sqm, seismic zone II and Staging 18 Mtr.250 KL /18 MT CAPACITY
250000
-
16.23
... More
(3.2.1.2) For foundation on SBC 7 MT/sqm applicable for SBC more than or equal to 7 MT/sqm and less than 10 MT/sqm, add 5%
250000
-
0.81
... More
(3.2.2.1) Rate for RCC OHSR, SBC 10T/Sqm, seismic zone II and Staging 18 Mtr.200 KL /18 MT CAPACITY
200000
-
17.08
... More
(3.2.1.2) For foundation on SBC 7 MT/sqm applicable for SBC more than or equal to 7 MT/sqm and less than 10 MT/sqm, add 5%
200000
-
0.85
... More
(3.4) Providing and fixing double flanged ISI marked DI class K-9 pipes as per IS:8329-2000 (amended upto date) as vertical pipes for RCC reservoirs including specials required such as duck foot bend,bend, tee etc. providing clamps at every 3 mtr, jointing material such as nuts,bolts,rubber packing hydraulic testing etc. complete in all respect up to and from valve chamber as per direction of EIC, technical specification and scope of work.
-
-
-
... More
(3.4.1) 100 mm
320
-
1782
... More
(3.4.2) 150 mm
900
-
2583
... More
(3.3) 200 mm
60
-
3349
... More
(P-11) Providing, lowering, aligning, fixing in position in pipe line, CI D/F Sluice valves of approved make of following Pressure rating & dia complete, confirming to IS:14846 (amended up to date) and of following specifications: Body, Bonnet, Wedge, Gland, Thrust Plate, Cap & Hand wheel of Grey cast iron of IS:210/ FG200 Stem - SS 304 ,Body Seat ring, Wedge facing ring & Bushes - LTB2/ SS , Face to face dimensions as per IS 14846/2000 (amended up to date), All exposed machined ferrous surfaces shall be painted with one coat of aluminium red oxide primer conforming to IS:5660 and two coats of black Japan paint conforming toType B of IS 341or paint conforming to IS9862 or IS2932( Non-Toxic- suitable for drinking water) applied inside and outside, Flanges Drilled as per IS 1538.Nut-Bolt confirming to IS:1363 and IS: 1367/ CS/ galvanised steel.Insersion rubber of black EPDM 6mm thick . Suitable support structure as per directions of EIC. Sluice valves including all jointing & jointing material, labour, testing and commissioning along with pipe line as per Technical Specifications and as per direction of Engineer-in- charge.
Note: Rates are exclusive of tail piece/ dismantling joints and earth work.Manually Operated CI Sluice valve of Class PN-1.0
-
-
-
... More
(P 11.4) 100 mm HW
29
-
6468
... More
(P 11.6) 150 mm HW
29
-
10205
... More
(1) Construction of RCC Clear Water Reservoirs of required capacity including excavation in all types of strata, foundation concrete, container walls, bottom slab, top roof slab and food grade epoxy paint to inner face of the container and slab, including refilling and disposing of surplus stuff , all labour and material charges, providing and fixing accessories such as M.S./Alluminium ladder/RCC Stairs inside and outside, manhole frame and cover, puddle collar, ventilators, satisfactory hydraulic test and water tightness test as per IS code and providing three coats of cement paints on all exposed surface of structure etc. complete in all respect as per design data, criteria, obligatory requirements and detailed specifications, scope of work and GA drawing. The job include painting the name of the scheme and other details on the reservoir and any other work related to structure as per the directions of Engineer-in- Charge, Technical Specification and Scope of Work.The rate indicated below are excluding the cost of pipes, specials and valve required for inlet, outlet, washout, overflow piping arrangement, but inclusive of DI puddle collar for inlet, outlet, overflow and washout pipe of appropriate sizes to be embedded in concrete. For 50KL
-
-
-
... More
Rates for RCC Circular Flat Slab CWR, SBC 10T/sqm, seismic zone II .
-
-
-
... More
(1.1) up to100 KL capacity
775000
-
6.41
... More
For foundation on SBC 7 MT/sqm applicable for SBC more than or equal to 7 MT/sqm and less than 10 MT/sqm, add 5%
775000
-
0.32
... More
(2) Construction of RCC Circular Ground Service Reservoirs on Hillock of required capacity including excavation in all types of strata, foundation concrete, container walls, bottom slab, top roof slab/dome, 20 mm thick cement plaster with water proofing compound in CM 1:3 proportion and food grade epoxy paint to inner face of the container and dome/slab, including refilling and disposing of surplus stuff , all labour and material charges, providing and fixing accessories such as M.S./Alluminium ladder/RCC Stairs inside and outside, manhole frame and cover, puddle collar, ventilators, satisfactory hydraulic test and water tightness test as per IS code and providing three coats of cement paints to all exposed surface of structure etc. complete in all respect as per design data, criteria, obligatory requirements and detailed specifications, scope of work and GA drawing. The job include painting the name of the scheme and other details on the reservoir and any other work related to structure as per the directions of Engineer-in- Charge, Technical Specification and Scope of Work.The rate indicated below are excluding the cost of pipes, specials and valve required for inlet, outlet, washout, overflow piping arrangement, but inclusive of DI puddle collar for inlet, outlet, overflow and washout pipe of appropriate sizes to
be embedded in concrete. Capacity 100KL
-
-
-
... More
(3.4.2) For capacity up to 500 KL.
200000
-
5.5
... More
Civil Works (Rates are based on PHED SOR 2020)
-
-
-
... More
(8.1) Construction of Pump house of required size suitable for installation of maximum 4 no. monoblock pump sets as per approved GA drawing, scope of work and technical specification complete work in all respect.
360
-
16225
... More
(8.2) Construction of boundary wall of Brick/ stone masonary as per enclosed GA drawing, scope of work and technical specifications complete work in all respect.
1780
-
4719
... More
(8.3) Providing and fixing steel, gate, grating and grills made of angles, tees, square bars, flats or black pipe with hold fast and fitting complete as per design and drawing including cutting welding and fabrication with priming coat of red oxide and two coat of enamal paints.
3930
-
87
... More
Procurement, Laying and jointing & testing of Distribution Pipeline (Rates are based on PHED SOR 2020)
-
-
-
... More
(SOR PIPE LINE 2020) Providing, lowering, laying in trenches, aligning, fixing in positionand jointing Ductile Iron (DI) ISi marked K-7 grade S&S pipesas per 15:8329-2000 (amended upto date), with internal cement
mortar lining suitable for potable water with rubber ring (EPDM)joints as per IS: 5382- 1985 including all taxes (Central and local),transportation and freight charges, inspection charges, loading/unloading charges, including cost of labour and material, specials(Tee, bend etc.) satisfactory hydraulic testing, disinfection etc.complete as per technical specifications and direction of Engineer- incharge. (excluding earth work)Note : Providing and fixing of all requisite specials as per drawing,design and layout are inclusive in RM measurement of the item andshall not be paid separately.
-
-
-
... More
(1.1.1) 80MM DIA
2174
-
1084
... More
(1.1.1) 100MM DIA
14131
-
1145
... More
(1.1.2) 150MM DIA
9567
-
1644
... More
(1.1.3) 200MM DIA
630
-
1986
... More
(1.4) HDPE PIPES
Providing, lowering, laying and jointing in trenches. standard lengths HDPE ISi marked Pipes as per IS-4984: l 995 (amendedupto date) with necessary jointing material like mechanicalconnectors, i.e. thread/ insert joint/ quick release coupler joint/compression fitting joint or flanged joint and specials jointing pipeby butt fusion/ electro fusion welding method, including all taxes ,transportation and freight charges, inspection charges, loading/unloading charges, stacking of pipes, including cost of labour andmaterial, specials (Tee, bend etc.), satisfactory hydraulic testing,disinfection etc. complete as per technical specifications and di rection of Engineer-in-charge of following class and diameter.(excluding earth work)Note : Providing and fixing of all requisite specials as per drawing,design and layout are inclusive in RM measurement of the item andshall not be paid. separately.Supply upto 110 mm dia. in coil & above 110 mm dia straight lengthin6M.
300
-
1084
... More
(1.4.1.1) HDPE PE-80 PN-6 75mm dia.
17016
-
162
... More
(1.4.1.2) HDPE PE-80 PN-6 90 mm dia.
37376
-
236
... More
(1.4.1.3) HDPE PE-80 PN-6 110 mm dia.
7169
-
360
... More
(1.4.1.2) HDPE PE-80 PN-6 125 mm dia.
1718
-
493
... More
(4.1) Earth work in excavation by mechanical means (Hydraulic Excavator )/ manual means in trenches for water supply pipe lines, shoring and strutting if required as per required gradient and line including safety provisions using site rails and stacking excavated stuff including up to all required lead cleaning the site etc. complete for lifts up to 1.5 depth and strata as specified. The work also includes depositing and refilling of trench with watering & ramming /compacting in layers and disposal of surplus excavated soil as directed for lead up to 50 mtr.
-
-
-
... More
(4.1.1) In all type of soil
4555.1
-
82
... More
(4.1.1.1) For HDPE pipe line dia up to 110 mm
39452.7
-
82
... More
(4.1.1.2) For dia of pipe up to 150 mm nominal, for HDPE pipe dia above 110
& up to 140 mm.
15480.4
-
128
... More
(4.1.2) In soft Rock
631.5
-
177
... More
(4.1.2.1) For HDPE pipe line dia up to 110 mm
16851.7
-
177
... More
(4.1.2.2) For dia of pipe up to 150 mm nominal, for HDPE pipe dia above 110
& up to 140 mm.
8156.8
-
253
... More
(4.1.3) In Hard Rock ( Blasting prohibited)
-
-
-
... More
(4.1.3.1) For dia of pipe above 150 mm and up to 350 mm nominal.
4923.74
-
757
... More
(11.3) SITC of Bulk Flow Meter with removable mechanism class "B" confirming to ISO:4064:2005/ IS: 2373 of approved make of following dia sized pipelines and specifications complete: Media : Water (Clear ), Temp. 50 deg., Pr. rating: PN16, Protection type: IP- 68, Body Material : IS-210 Gr. FG-200, Accuracy Class :Class B (±2 % @ Nominal flow rate), Magnetic Drive, Dry Dial, Epoxy powder coated, Pulse out put option, Anti-magnetic protection including all materials and making connection with existing pipeline required for Bulk Flow Meter including cutting the existing pipeline etc. complete in all respect as per technical specification and as per direction of Engineer In-Charge.
Note: Rates are exclusive of tail piece / dismantling joints and earth work.
-
-
-
... More
(40604) BFM 100 mm
9
-
16372
... More
(40606) BFM 150 mm
15
-
24160
... More
(40607) BFM 200 mm
3
-
29425
... More
(SOR PIPE LINE 2020) Providing, lowering, laying, aligning, fixing in position and jointing at all level/depth S&S standard special with rubber ring(EPDM) joints as per SI:5282-1985 such as tees, bends, tapers, caps etc. within trenches in DI pipe line complete including all material, labour testing and commissioning along with pipe line as per technical specifications and direction of Engineer-in- charges :
-
-
-
... More
(1.3.1) A/S Tee, Bend, Reducer(All End Socketed)
-
-
-
... More
(1.3.1.1) Upto 300 mm Diameter
6070
-
121
... More
(6.1) Providing, lowering, aligning, fixing in position in pipe line, CI D/F Sluice valves of approved make of following Pressure rating & dia complete, confirming to IS:14846 (amended up to date) and of following specifications: Body, Bonnet, Wedge, Gland, Thrust Plate, Cap & Hand wheel of Grey cast iron of IS:210/ FG200 Stem - SS 304 ,Body Seat ring, Wedge facing ring & Bushes - LTB2/ SS , Face to face dimensions as per IS 14846/2000 (amended up to date), All exposed machined ferrous surfaces shall be painted with one coat of aluminium red oxide primer conforming to IS:5660 and two coats of black Japan paint conforming toType B of IS 341or paint conforming to IS9862 or IS2932( Non-Toxic- suitable for drinking water) applied inside and outside, Flanges Drilled as per IS 1538.Nut-Bolt confirming to IS:1363 and IS: 1367/ CS/ galvanised steel.Insersion rubber of black EPDM 6mm thick . Suitable support structure as per directions of EIC. Sluice valves including all jointing & jointing material, labour, testing and commissioning along with pipe line as per Technical Specifications and as per direction of Engineer-in- charge.
Note: Rates are exclusive of tail piece/ dismantling joints and earth work.
-
-
-
... More
Manually Operated CI Sluice valve of Class PN-1.0
-
-
-
... More
(6.1.1.1) 80 mm HW
116
-
4695
... More
(6.1.1.2) 100 mm HW
106
-
6468
... More
(6.1.1.4) 150 mm HW
57
-
10205
... More
(6.1.1.5) 200 mm HW
13
-
16802
... More
(4.4) Providing and laying in position cement concrete 1:4:8 (1 Cement : 4 coarse sand : 8 graded stone aggregate 40 mm nominal size) in base course complete including all material, labour, machinery, lighting, guarding for road restoration work in trenches of pipe line and chamber work. Measurement for CC work to be made as per standard trench width specified in tender document and no extra payment shall be made for trench width more than specified, complete work as per technical specification and scope of work.
2929.5
-
3452
... More
(4.5.1) Providing and laying in position cement concrete in specified grade over prepared base course complete including finishing, curing, all material, labour, machinery, lighting, guarding for road restoration work in trenches of pipe line and chamber work. Measurement for CC work to be made as per standard trench width specified in tender document and no extra payment shall be made for trench width more than specified, complete work as per technical specification and scope of work.M20 grade Nominal Mix
1: 1.5: 3 (1 cement : 1.5 coarse sand : 3 graded stone aggregate 20mm nominal size).
2929.5
-
5138
... More
(4.2) Dismantling of cement concrete pavement for pipe line and chambers by mechanical means using pneumatic tools, cutting the peripheral edge by CC cutter, breaking to pieces not exceeding 0.02 cum in volume and stock piling at designated locations and disposal of dismantled materials up to a lead of 1000 meters. Measurement for dismantled trench to be made as per standard trench width specified in tender document and no extra payment shall be made for trench width more than specified, re-handling of material/earth to complete the tasks as per technical specification and scope of work.
5859
-
802
... More
(4.5) Removing & Re-fixing of Precast concrete interlocking blocks by manual, stacking of severciable & un serviceable material separately. disposal of dismantled material lead up to 50 mtr. The C.C. interlocking paving blocks be laid on average 25 mm thick bed of coarse sand and the joints to be filled with fine sand. Laying procedure on compacted sub base as defined. Complete job is to be executed as per the directions of Engineer in charge. The rates to be inclusive of fixing of minimum 70 percent reusable precast concrete interlocking block and cost of required new precast concrete interlocking block, all lead and lift as per general specifications. (Interlocking block manufactured by fully computerized automatic stationery hydraulic vibro pressed machine & full computerized automatic batching plant of class A-1 as per BS:6717-2001. Tensile splitting strength and breaking load as per BS: 6717-2001 Colour: Grey cement natural colour. Variation in Dimension : Less than 1.6 mm Variation in thickness: Less than 3.2 mm)
-
-
-
... More
(4.5.2) b) 80 mm thick.
8797
-
268
... More
House Hold connection (Rates are based on PHED SOR 2020)
-
-
-
... More
(1.19) Providing service connection as per technical specification and standard drawing as per relevant IS code (amended up to date) from all kind of water mains up to consumer meter/premises (Complete job).This job includes digging out suitable size of pits and trench for laying service line in all kinds of soil including demolishing of cement concrete,WBM, Black top etc. of all thickness; cutting of CC road/jhiri by using a concrete cutter machine; depositing and refilling of pit & jhiri with watering & ramming /compacting in layers and disposal of surplus excavated soil as directed with in a lead of 50 meter ; providing & fixing of all fitting duly approved in accordance with ISO/DTR 9080 as per specification for potable water including approved make of MS/PVC clamp with saddle piece, gunmetal ferrule 4.0 mm (ISI make) , valve (IS: 778) and specials with MDPE pipe PE 80 PN 12.5 as per ISO 4427 below ground level and GI 15 mm class B (ISI mark) above ground level ( max. length 3.0 mtr), P&F a Bib Cock (IS : 8931 Mark), Superior quality Brass 400 gm,15 mm nominal bore including accessories with flushing, cleaning, disinfecting and testing of pipe line complete required for making of service connection complete in all respect including labour charges . In addition to the ferrule, an orifice of 4.0 mm dia should also be provided in the service line at the entry point of the consumer's property in such a way that it should be accessible for inspection to VWSC, PHED and any other authority which would like to inspect as and when required. The service line should be laid at least 45 cm below ground level, except in case of concrete/bituminous roads where minimum depth shall be 20 cm.
For detailed specifications of MDPE pipes please refer section
"Technical Specifications" of bid document. General specifications of MDPE pipes shall be as under:
• The raw material shall be virgin PE 80 Blue compound and comply with the requirements of ISO/Directive of testing material : 9080 with minimum required strength of 8 Kg/sq.cm.
• The raw material shall be Food grade quality Pressure rating shall be 12.5 Bar.
• The pipes shall bear ISO marking.
-
-
-
... More
(1.19.1) Average length up to 05 mtr 20 mm dia MDPE pipe/ 15 mm GI class B pipe
10133
-
2249
... More
(9.3) Data entry of existing FHTCs in rural area under JJM on website ejalshakti.gov.in; work includes visiting the village for collecting basic data consumers like i.e. Aadhar no./ration card/voter ID/BPL card/ PAN card/driving licence/passport/Antyodaya card/mobile no. etc. and entering the details on the above website. The cost also includes computer and operator.
10020
-
30
Evaluation Notes How It Works ?
Potential Partner
Select Your Requirements