Panchayati Raj Department Tender

DPC with RCC 1:1.5:3 mix

Brick work in super structure using bricks of class designation-75 in CM 1:6

Reinforced cement concrete work including curing compaction, finishing with rendering in cement sand mortar 1:3 and making good and joints excluding cost of centering, shuttering and reinforcement in 1:1.5:3 (1cement: 1.5course sand: 3-graded stone aggregate 20mm nominal size)

Providing and fabricating reinforcement for RCC work including straightening, cutting, bending, placing in position and binding (including cost of binding wire) in foundation and super structure up to 4.5m height above plinth level hot rolled deformed (IS: 1139) cold twisted (IS: 1786) bars

Centering and shuttering with plywood or steel sheets including strutting, propping, bracing both ways with wooden members and removal of from work

P & L CC on roof

S & F Mosaic tiles on roof

Providing & fixing 12 mm thick tegular edge Glass Fibre Reinforced Gypsum False ceiling tiles of size 595 x 595 mm in true horizontal level suspended on inter locking metal grid of hot dipped galvanised steel sections ( galvanized @ 170 gsm/sqm.) consisting of main “T” runner with suitably spaced joints to get required length and of size 24x38mm made from 0.30mm thick (minimum) sheet spaced at 1200mm center to center and cross “T” of size 24x25mm made of 0.30mm thick (minimum) sheet, 1200mm long spaced between main “T” at 600mm center to center to form a grid of 1200x600 mm and secondary cross “T” of length 600mm and size 24x25mm made of 0.30 mm thick (minimum) sheet to be interlocked at middle of the 1200x600mm panel to form grids of 600x600mm and wall angle of size 21x21x0.30 mm and laying false ceiling tiles of approved texture in the grid including, wherever, required, cutting/making, opening for services like diffusers, grills, light fittings, fixtures, smoke detectors etc. Main “T” runners to be suspended from ceiling using GI slotted cleats fixed to ceiling with 6 mm dia and 50mm long dash fasteners, 4mm GI adjustable rods with galvanised level clips spaced at 1200mm center to center along main T, bottom exposed width of 24mm of all T- sections shall be pre-painted with polyester paint, all complete at all heights as per

20mm thick plaster on new work including curing and racking of joints in CM 1:6

Providing and applying white cement based putty over plastered surface to prepare the surface even and smooth complete (PWD-2022)

Finishing walls with Acrylic Smooth exterior paint of required shade including all scaffolding.New work ( Two or more coat incuding base coat of water proofing cement paint) -PWD BSR -2022

Wall painting with plastic emulsion paint of required shade including all scaffolding.New work ( Two or more coat incuding base coat of water proofing cement paint) -PWD BSR-2022

S & F Aluminium door

S & F Aluminiu window

S & F Iron grill on Aluminium window

S & F Channal door

Earth work in filling with ordinary soil

Carriage of earth-lead Two KM

Cement concrete in floor with brick ballast size 40mm including curing and compaction etc in 1:6:12 mix

S & F Polished Kota stone flooring

Furniture + Books +Almira + Electric fittings + Water fittings + Sanitory fittings etc