Panchayati Raj Department Tender

Labour charge for making slot in blank pipe made. of ERW M.S. black pipe ISI mark of following sizes at the site of work including required size of slotting as per IS:8110-1985.200 dia 200mm

providing & lowering in tubewell ISI marked GI pipe "B" class Steel tube as per IS 1239 or amended up to date and zinc cozrinh as per IS 4736 threaded and double flanged (Welded) on bouth ends two number 25x30mm MS flat welded on bouth etc. Complete in all respect 2.24

Supply and installation of 3 phase submersible pumping motor pump sels Is!marked IS:8034-2011) of 5 star rating energy saving (like kirloskar.lecho,texmo induding screwing and welding of flanges on gi riser pipes and transportaion etc. complate 2.15.12 Uplo 15 kw (20HP) & head above 120 mir

Supply & fixing of ISI marked three core pvc flat submersible cable as per IS 694:1990 including connection 10sqmm 3core flat/raund

Supply and Fixing of electric control feeder panel comprising of suitable rating MCCB, fully automatic star-delta starter, over load relay, ampere meter with CTs, volt meter, phase preventer, suitable starting capacitors, phase indicators, lighting arrangement etc. complete suitable for three phase pump set. The panel should have space for energy meter (supplied by DISCOM). All these equipments shall be housed by panel box made out from 18 gauge M.S. Sheet with powder coating. Panel should be of minimum size 900 x 600 x 450 mm with Stand (made of angle iron of size 35x35x5mm) duly bolted/screwed with enclosure box having 4 legs, each leg's length 18" and double door including in built locking system. The legs should be embedded in M-15 cement concrete plat form. The size of CC platform should be equal or bigger than the base size of panel having height of at least 200 mm from ground level. The panel should have opening of suitable size in front of space for energy meter with glass for meter reading. The operation of panel should be suitable for on 440 Volt AC Supply. Above 15 hp & upto 20 hp

Adding for fixing of Tripod lowering UnLowering Charges

providing.lowring laying and jointing marked ples of following grade and nominal dia meter as per IS-4984, 1995 with In trenches tandared lengths HDPE ISI messosary jointing material like mechanical connectors e.c. thread/Insert joint/quick realease coupler joint/compession flitting jointe or flanged joint and j joining pipes in

providing.lowring laying in tube well ISI marked GI Pipe Medium duty ("B" class) steel tube as per IS 1239 or ameded up to date and zinc coating as per IS 4736 theraded and double flangend on bouth ends and two number 25x3 mm ms flat welded on bouth ends between pipe & finger rubber awser