Military Engineer Services Tender

Taking up or down 15mm bore galvanised steel water tubing including connections, fixed in walls, ceiling or laid under floor or laid in trenches etc complete all as specified and directed by Engineer-in-charge. Note :-Excavation and earthwork shall be measured and paid for separately.

All as per Srl item No 4 above but 20 mm dia bore.

All as per Srl item No 4 above but 25 mm dia bore.

All as per Srl item No 4 above but 40 mm dia bore.

All as per Srl item No 4 above but 50 mm dia bore.

All as per Srl item No 4 above but 80 mm dia bore.

All as per Srl item No 4 above but 100 mm dia bore.

All as per Srl item No 4 above but 150 mm dia bore.

S&F 15mm bore galvanized steel water tubing medium grade with & including all fittings and fixed complete to walls and ceilings or laid in floors / trenches complete all as specified and directed by Engineer-in-charge.

All as per Srl item No 12 above but 20 mm dia bore.

All as per Srl item No 12 above but 25 mm dia bore.

All as per Srl item No 12 above but 40 mm dia bore.

S&F 50mm bore galvanized steel water tubing medium grade with & including all fittings, laid in trenches complete all as specified and directed by Engineer-in-charge.

All as per Srl item No 16 above but 80 mm dia bore.

Supplying, laying, jointing, commissioning and testing 100mm bore centrifugally cast (Spun) ductile iron pressure pipe with spigot and socketed ends class K-7, confirming to IS : 8329/2000 blast furnace slag cement with portland cement properties suitable for rubber gasket jointing / tyton joints with inside cement mortar lining and black bitumen external coating, duly (ISI marked) laid in trenches complete all as specified and directed by Engineer-in-Charge. Note :- (i) DI fittings shall be measured and paid separately under respective items (ii) Pipes shall be laid in trenches already excavated for taking out old GI pipe line. Extra excavation / earthwork shall not be paid.

All as per Srl item No 18 above but 150 mm dia bore.

S&F in replacement gun metal globe or gate valve 20mm bore with iron wheel head, screwed both ends for iron pipes complete all as specified and directed by Engineer-in-charge.

All as per Srl item No 20 above but 25 mm dia bore.

All as per Srl item No 20 above but 40 mm dia bore.

All as per Srl item No 20 above but 50 mm dia bore.

Supply & fixing cast iron body sluice valve heavy duty class ‘PN-1.6’ of 80 mm bore, ISI marked with IS 14846 : 2000, both flanged ends and drilled, high tensile stainless steel spindle, CI gate with brass ring, non rising type, cast iron wheel handle, cast iron cap, with 3mm thick neoprene rubber gasket joint and nuts, bolts (high tensile), washers etc, and testing, including dismantling & taking out old unserviceable sluice valve of 80 mm bore, complete, all as specified & directed.

All as per Srl item No 24 above but 100 mm dia bore.

All as per Srl item No 24 above but 150 mm dia bore.

S&F Cast iron non return valve / reflux valve with rubber seat flanged type with by pass arrangement suitable for 80mm bore pipe, ISI marked, conforming to IS- 5312/2004 with stainless steel spindle, CI gate with brass nuts, bolts, washers and jointing with necessary ruber gasket etc including dismantling & taking out old unserviceable sluice valve of 80 mm bore, complete, all as specified & directed.

All as per Srl item No 27 above but 100 mm dia bore.

Supply and fix Foot Valve conforming to IS 4038, 80 mm (4”) dia complete all as specified and directed by Engineer-in-charge.

All as per Srl item No 29 above but 100 mm dia bore.

Supplying & fixing DI fittings confirming to IS-9523-2000 suitable for spigot & socketed pipes such as bends (any type, radius and angle), tapers any type (straight, bend, increasing, decreasing or double socket etc),tee pieces, single branch, 'Y' junction, double branch, cross collar, caps and plugs etc. suitable for spigot and socketed pipes upto 150 mm bore, complete, all as specified and directed by Engineer-in-charge.

M&L for Construction of brick masonry valve pit, in repair, of internal size 60cm x 60cm x 60cm including necessary excavation and earth work in soft/loose soil, brick work, plastering, white wash, PCC coping, MS frame made out of angle iron of size 40mmx40mmx6 mm, MS sheet cover of 3 mm thick fixed to angle iron frame by means of hinges welded to frame and painting with 2 coats of synthetic enamel paint over a coat of red oxide primer on steel surfaces and grouting the frame in PCC 1:2:4 type B-1 including handle and locking arrangement with one number 50 mm dia brass pad lock , complete all as specified and directed by Engineer - in - Charge Note :- (i) Brick wall shall be 23 cm thick built in cement mortar (1:4) (ii) Internal plaster shall be 15 mm thick in cement mortar (1:4) and external plaster upto 450mm from top shall be 20mm thick in CM (1:6) and remaining external surface shall be flush pointing in CM (1:6) as the work proceeds. (iii) PCC in foundation shall be 15 cm thick in cement concrete (1:4:8) type D2 using 40 mm graded stone aggregate extended 15 cm all around from the external face of the walls. (iv) PCC coping shall be 15 cm thick in cement concrete ( 1:2:4) type B1 using 20 mm graded stone aggregate including grouting of angle iron frame in PCC. (v) Three coats of white wash to internal surfaces of valve pit. (vi) Depth of valve pit shall be reckoned from the top of PCC in foundation.

All as per Srl item No 32 above but internal size 90cm x 90cm x 90cm

All as per Srl item No 32 above but internal size 150cm x 150cm x 90cm

M&L for 'D' Joint suitable for DI /CI/GI pipe sizes 50 mm dia bore including excavation work and other fittings as required including testing at site complete all as specified and directed by the Engineer-in-Charge.

All as per Srl item No 35 above but 80 mm dia bore.

All as per Srl item No 35 above but 100 mm dia bore.

All as per Srl item No 35 above but 150 mm dia bore.

S & F in repair 15mm bore ball valves high pressure of PTMT with epoxy coated Aluminium rod & highdensity plastic ball screwed for iron pipe and fixed all as specified and directed.

All as per Srl item No 7 above but 20 mm dia bore.

All as per Srl item No 7 above but 25 mm dia bore.

(A) M&L for replacing of existing filter media consisting of gravel and sand in filter bed having filter capacity 40000 Gallon per hr, cleaning of filter bed ,refilling of filter bed with existing grooves after carrying out necessary cleaning as per details given below all as directed by Engr-in-charge. (B) Removing the existing filter media consiting of ground and sand ,spreading and leveling out side for refilling ,cleaning the surface,walls,bed sand Nozzles with wire brushes and cleaning the walls with bleaching powder solution,washing with fresh water and finally washing the complete filter bed twice with Antibecterial spray and ultra voilet radiation treatment etc complete all respect, anti becterial spray and ultra voilet radiation treatment ,vacuum cleaning etc complete. (C) Refilling the filter media in the filter bed ,gravels(pebbles) removed from the existing filter media after the washing pebbles with 5% concentrated solution of hydrochloric acid (HCL) And treatment with 10% concentrated solution of NAOH (sodium hydro Oxide ) and laying and stacking in diffrent layers into filter beds as per details given as under:-(D)1. Filter gravels (pebbles) 1/8'" to 1/4" - (0.4 Cum.) 2. Filter gravels (pebbles) 1/4" to 3/8"-( 0.4 Cum ) 3. Filter gravels (pebbles) 1/2'" to 3/4" - (0.4 Cum).

M&L for repairing of PLC based pump automation and protection panel for water supply repair /replacement of indicator lamp 230 volt , audio signal generator complete at CPH.

M&L in repair for over hauling / lubrication emtork actuator valves model No.: M1/030/A and M0/030/E including replacement of unserviceable spare parts at CPH area make marsh , three phase , TEFC type motor , DOI starting complete entire satisfaction of Engr-in-charge. Note : Spare part will be measured and paid separetly under supply only items.

Supply only actutaor stroke ( stainless steel spindle 2.4 mtr long ) Make - as per sample .

Supply only coupling piece , make as per sample.

Supply only spur gear Box ,make as per sample.

Supply only torque switches, make as per sample

Supply only travel switches make as per sample .

Supply only torque switch operating can make as per sample.