Local Self Government Department Tender

The wall relief will be made up of artificilal view of the the village them showing the real look of the village men using bullock cart. The two cows shall be made of height five feet from the ground with embossed four to six feet from the wall. The men shall be seating between both the cows using the bullock cart.the wodden look round shape yoke and both the cows shall be attach with the yoke. The men seating on the box seat shall be embossed two feet from the wall or more than that if needed at certain places and the man shall look like hold the rope and using on the cows the make them move ahed the wall shall be made in such a shape showing the traces, shaft the all the parts used in the bullock cart till the last wheels embossed from the main back wall. The wall part shall be made in complete village look with the childens playing embossed tress houses of village look ladies using mut been going towards their houses With the complete look of the village in embossed look. The wall shall be made up of fiber glass material . The whole wall shall be of different colours as original of village, size and shape. This will be carried out under the supervision engineer. The entire wall will be made from a single piece of composite fiberglass material. The core or die of the wall will also be produced from the same composite material, based on the provided and approved design model. After the die has been completed, the entire wall will be fabricated using more than three layers of fiberglass mat, cobalt, and other specific chemical treatments to ensure strength and durability.The process must be executed carefully and precisely to reflect the intricate details of the design. No joints should be visible, ensuring a seamless surface. Each of these elements will be applied as part of the overall containers wall structure, including all the color in different shades, variations and decorations seen in the containers Once completed, the entire wall will be encased within an MS (mild steel) frame box, which will provide structural support and protection from all sides. The frame will also allow for easy installation and transportation.The entire MS frame and support system will be waterproofed and treated with a specialized protective coating to ensure it can withstand weathering. Once installed, the wall will be thoroughly inspected by contractors as per the engineer's requirements to guarantee it is securely and accurately placed.

The wall pannels will be made up of artificilal view of the the village shall be made in such a look of the childrens playing and drinking water from the hand pump the hand pump shall be made of of height four to five feet with a children drinking water from it and other childrens seating and standing a side playing and some waiting in the to drink water and one children pulling the handle part the hand pump and childrens shall be embossed three feet from the wall. The wall shall be made in such a look that so many ladies sall be coming from the back road with mut been on their head and the complete wall shall be covered with the tree houses and village them parts. The wall shall be made up of fiber glass material with the containers attach on the of all the different shape and size and shape full design as per the enclosed images. The whole wall shall be of different colours as original of village, size and shape. This will be carried out under the supervision engineer.The entire wall will be made from a single piece of composite fiberglass material. The core or die of the wall will also be produced from the same composite material, based on the provided and approved design model. After the die has been completed, the entire wall will be fabricated using more than three layers of fiberglass mat, cobalt, and other specific chemical treatments to ensure strength and durability.The process must be executed carefully and precisely to reflect the intricate details of the design. No joints should be visible, ensuring a seamless surface. Each of these elements will be applied as part of the overall containers wall structure,including all the color in different shades, variations and decorations seen in the containers Once completed, the entire wall will be encased within an MS (mild steel) frame box, which will provide structural support and protection from all sides. The frame will also allow for easy installation and transportation.The entire MS frame and support system will be waterproofed and treated with a specialized protective coating to ensure it can withstand weathering. Once installed, the wall will be thoroughly inspected by contractors as per the engineer's requirements to guarantee it is securely and

The wall relief will be made up of artificilal view of the the village shall be made in such a look of the cow staring from the wall side front with embossed five feet from the wall and height of the cow should be five feet from the found with a men seating and getting out milk from the cow the men shall be of height three feet height in seating position with wearing traditional dress and carrying the bucket for the milk. The wall shall be made in plane look of village with rope attach from the wall to the ne cog cow and rest of wall shall be plane and windows. The whole wall shall be of different colours as original of village, size and shape. This will be carried out under the supervision engineer.The entire wall will be made from a single piece of composite fiberglass material. The core or die of the wall will also be produced from the same composite material, based on the provided and approved design model. After the die has been completed, the entire wall will be fabricated using more than three layers of fiberglass mat, cobalt, and other specific chemical treatments to ensure strength and durability.The process must be executed carefully and precisely to reflect the intricate details of the design. No joints should be visible, ensuring a seamless surface. Each of these elements will be applied as part of the overall containers wall structure,including all the color in different shades, variations and decorations seen in the containers Once completed, the entire wall will be encased within an MS (mild steel) frame box, which will provide structural support and protection from all sides. The frame will also allow for easy installation and transportation.The entire MS frame and support system will be waterproofed and treated with a specialized protective coating to ensure it can withstand weathering. Once installed, the wall will be thoroughly inspected by contractors as per the engineer's requirements to guarantee it is securely and accurately placed