Border Security Force Tender

Wiring for circuit/ submain wiring along with earth wire with the following sizes of FRLS PVC insulated copper conductor, single core cable in surface/ recessed medium class PVC conduit as required. i) 2 X 1.5 sq. mm + 1 X 1.5 sq. mm earth wire

Supplying and drawing following sizes of FRLS PVC insulated copper condutor, single core cable in the existing surface/ recessed steel/ PVC Conduit as required. 3 x 1.5 sqmm

3 x 4.0 sqmm

3x6.0 sqmm

Supplying and drawing 4 pair 0.5 mm dia FRLS PVC insulated annealed copper conductor, unarmored telephone cable in the existing surface/ recessed steel/ PVC conduit as required

Supplying and drawing co-axial TV cable RG-6 grade, 0.7 mm solid copper conductor PE insulated, shielded with fine tinned copper braid and protected with PVC sheath in the existing surface/ recessed steel/ PVC conduit as required.

Supplying and fixing of following sizes of medium class PVC conduit along with accessories in surface/recess including cutting the wall and making good the same in case of recessed conduit as required. i) 20 mm

ii) 25 mm

iii) 50 mm

Supplying and fixing following modular switch/ socket on the existing modular plate & switch box including connections but excluding modular plate etc. as required. 5/6 amps switch

ii) 3 pin 5/6 A socket outlet

iii) Telephone socket outlet

iv) T.v. socket outlet

Supplying and fixing suitable size GI box with modular plate and cover in front on surface or in recess, including providing and fixing 3 pin 5/6 A modular socket outlet and 5/6 A modular switch, connections etc. as required

Supplying and fixing suitable size GI box with modular plate and cover in front on surface or in recess, including providng and fixing 2 nos. 3 pin 5/6 A modular socket outlet and 2 nos. 5/6 A modular switch, connections etc. as required. (For light plugs to be used in non residential buildings).

Supplying and fixing suitable size GI box with modular plate and cover in front on surface or in recess, including providing and fixing 6 pin 5/6 & 15/16 A modular socket outlet and 15/16 A modular switch, connections etc. as required

Supplying and fixing of following way single pole and neutral, sheet steel MCB distribution board 240 V on surface / in recess complete with tinned copper bus bar, neutral bus bar, earth bar, dinbar, interconnections powder painted including earthing etc as required (But without/MCB/RCCB/ISOLATOR). I) 8 way double door

Supplying and fixing 5 A to 32 A rating 240/415 volts,"C" curve,miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections testing and commissioning etc as required. i) Single pole

ii) Double pole MCB

Providing and installation, testing and commissioning of MODULAR ceiling fan Regulator Rotary step type and dismantling the existing complete etc. as required. Havells or equivalent make Havells/ Anchor/gold medal

Earthing with G.I. earth pipe 4.5 mtr long x 40 mm dia including accessories and providing masonary enclosure with cover plate having locking arrangement and watering pipe etc. with charcoal or coke and salt complete as required.

Providing and laying earth connection from earth electrode with 6 SWG dia G.I. Wire in 15 mm dia G.I. pipe from earth electrode including connection with G.I. thimble excavation and re-filling as required.

Providing and fixing 6 SWG dia G.I. wire on surface or in recess for loop earthing along with existing surface/ recessed conduit/ submain wiring/ cable as required

Providing and fixing following rating and breaking capacity and pole MCCB in existing cubicle panel board including drilling holes in cubicle panel, making connections, etc. as required.a) 200 Amp, 16 KA, TPMCCB

Laying of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 KV grade of following size direct in ground including excavation and refilling the trench etc as required, but excluding sand cushioning and protective covering. A) Above 95 sq. mm and upto 185 sq. mm

Laying of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 KV grade of following size in the existing RCC/ HUME/ METAL pipe as required. A) Above 95 sq. mm and upto 185 sq. mm

Laying of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 KV grade of following size in the existing masonry open duct as required. A) Above 95 sq. mm and upto 185 sq. mm

Supplying, Installation, testing and commissioning of heavy duty exhaust fan, metalic body 230V,300 mm sweep,single phase including making the hole to suit the size of the above fan, making good the damage i/c P/F louver and shutter complete with frame for exhaust fan of size connections,testing and commissioning etc as required.

Providing, Installation, testing and commissioning of 36-42 watt Ultra modern designed architectural LED luminaire which provides soft-light and glare free symmetrical illumination, suitable for Armstrong/Grid ceiling, directly on ceiling/ wall, including connections with 1.5 sq. mm FRLS PVC insulated, copper conductor, single core cable and earthing etc. as equired. Make- Havells(Plano 2x2 ;Cat no PLANO2X2PLR36WLED865S ) make or equivalent model & specification in Philips/Bajaj/Crompton etc as reqd

Providing and fixing of 10 W LED battern for mirror light new e-Lite LeD triyca batten with options of 3000K , all in one fixture Havella make with wire complete with connection, testing commissioning etc as required and similiar Make of CG/Bajaj /Havells-LHEXBYPNIN1W010/Philips

Providing and fixing of 20 Watt, 6500K LED batten lighting fixture with extruded polycarbonate directly on ceiling/ wall, including connection with connector, testing and dismantling the existing complete etc. as required. Cat no LHEXACP7IN1W020 Havells(E-Lite LED Pride Plus Neo) make or equivalent model & specification in philips/Crompton-LDLSR-20-CDL/Bajaj

Supplying,Installation, testing and commissioning of wall fan 400 mm sweep,connection with 1.5sq. mm FRLS PVC insulated, copper conductor, single corecable etc. as required.Make- Make - Havells (Model - Sameera)/Bajaj/Crompton or as per direction of engg incharge.

Providing and laying of 3.5 C x 35 sqmm one number PVC insulated and PVC sheathed / armoured XLPE power cable of 1.1 KV grade of following size direct in ground including excavation and refilling the trench etc as required, but excluding sand cushioning and protective covering. Make- Havells/Polycab/KEI

Providing and laying of 3.5 x 35 sqmm one number PVC insulated and PVC sheathed / armoured XLPE power cable of 1.1 KV grade of following size in the existing RCC/ HUME/ METAL pipe as required. Make- Havells/KEI/Polycab

Providing and laying of 3.5 C x 35 sqmm one number PVC insulated and PVC sheathed / armoured XLPE power cable of 1.1 KV grade of following size in the existing masonry open duct/open laying as required. Make- Polycab/Havells/KEI

Providing and laying of 2 C x 10 sqmm one number PVC insulated and PVC sheathed / armoured XLPE power cable of 1.1 KV grade of following size direct in ground including excavation and refilling the trench etc as required, but excluding sand cushioning and protective covering. Make- Havells/Polycab/KEI

Providing and laying of 2 x 10 sqmm one number PVC insulated and PVC sheathed / armoured XLPE power cable of 1.1 KV grade of following size in the existing RCC/ HUME/ METAL pipe as required. Make- Havells/KEI/Polycab

Providing and laying of 2 C x 10 sqmm one number PVC insulated and PVC sheathed / armoured XLPE power cable of 1.1 KV grade of following size in the existing masonry open duct/open laying as required. Make- Polycab/Havells/KEI

Supplying and fixing 25 watt new generation, post-top lantern, energy savihg, environmental friendly, long life aesthetically designed with symmetrical light distribution, spun aluminium landscape luminaire with high power LEDs as light source complete with all accessaries directly on existing GI pole i/c connection with 1.5 sqmm FRLS insulated copper conductor, singel core cable and earthing etc. as required.Make - Phillips/Havells/C&G/Wipro/Bajaj.

Provinding and fixing of hot pressed moulded FR SMC (Sheet moulding compound) looping box hinged type for post top lantern having size dia 300mm x 260mmx120mm having suitable hole at the bottom including connections of MCBs mounted on din rail , connectors and suitable for holding the clamp to be fixed on the pole with the help of suitable sizes of GI clamp including making incoming and out going connections with suitable size of thimble etc as required. Make - Sintex or as per direction of Engg in charge.

Providing and fixing of 50 mm dia GI Pole (medium class) having 03 mtr length for mounting of post top lantern with single coat of red oxcide paint & two coat paint aluminium paint on pole before installation with nut, bolts and washers including i/c electrical connection with 1.5 sqmm FRLS copper wire from post top lamp to Loop box and excavation, refilling as required upto 1 mtr depth with Cement concrete 1:3:6 (1 cement: 3 coarse sand : 6 graded stone aggregate 40 mm nominal size) for installation & making of collar of 50 mm GI Pole and testing commissioning etc as required (Final approval issued by Engineer in Charge)

SITC of various sizes water protected outdoor (Water proof) hut type compartmentalized type double door cubical panel both side opening having depth up to 600 mm suitable for 415 Volt, 3 phases, 50 Hz made out of 2mm thick CRCA sheet with required hardware duly painted with powder coated .Panel having separate detachable gland plate, end terminaion as per cable of size,angle iron base frame made out of 50mmx50mmx5mm angle iron of suitable size of the feeder pillar (minimum height 60cm), hinged door, both side opening with locking arrangement, earth bar/stud, led pilot light for phase indicator (R,Y,B) on top, 400A/415V 4 strip aluminum bus bar duly PVC sleeved, connection inter–connection with 25% extra current carrying capacity busbars to MCCBs spreader links and with solid copper conductor cable 10 sqmm/ solid aluminium rod for connection to MCBs and heavy duty connectors of required current carrying capacity to be fixed back side including incoming/Outgoing cables connection for three and single phase MCBs where as required, testing on load and marking of location for incoming and out going distribution i/c grouting the legs in existing floor with 1:3:6 cement concrete foundation and dsimantling the existing panel, incoming/outgoing cable connections etc complete as required i/c dismentling the existing feeder pillar and UG cable. (Panel should be as per design & drawing approved by Engg in charge).LED light min 5 watt with on/off switch to be provided in the panel.

Providing And Fixing Of 100 Amp MCCB three pole Breaking Capacity 10 ka with spreader links for AC Three phase, 415 v Ics=100% Icu, EZC Fixed thermal Magnetic trip unit (TMD) as per details specification in the LT panel and making inter connections with busbar as per the detail specifications mentioned in above new panel item etc as required.

Providing And Fixing Of 63 Amp MCCB three pole Breaking Capacity 10 ka with spreader links for AC Three phase, 415 v Ics=100% Icu, EZC Fixed thermal Magnetic trip unit (TMD) as per details specification in the LT panel and making inter connections with busbar as per the detail specifications mentioned in above new panel item etc as required.