Baba Farid University Of Health Sciences Tender
If you want to inquire about any e-tender the Punjab government has posted, Bidassist gives a one-stop solution i.e. being a registered bidder you will find every eprocurement Punjab tender on BidAssist.There is no need to enter all the details on the website of etender.up.nic.in as BidAssist helps you find the specific Punjab etender you're looking for. Read further to learn how to search and bid for etender Punjab.
Costs
EMD
₹ 22,54,000Document Cost
₹ 5,000Tender Fee
₹ 2,360
Description
Scription for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user
Contact
Tender Id
2020_DMER_42850_1Bid Award Id
ViewTender No
BFUHS/387/2020Tender Authority
Baba Farid University Of Health Sciences ViewPurchaser Address
-Website
http://http://www.bfuhs.ac.in/
GEM & Bid Advisory Services
Get portal registration, tender bidding, product/service listing or vendor/MSME certification services at a nominal cost
Documents
advertisement for tender for construction of child block for MCH block in GGSMCH Faridkot
Price bid for tender for construction of child block for MCH block in GGSMCH Faridkot
tender for construction of child block for MCH block in GGSMCH Faridkot
BOQ Items
Reinforced cement concrete M-25 mechanicaly batch mixed using batch type concrete mixer as per IS:1791 and vibrated by needle vibrator but excluding steel reinforcement centring and shuttering in foundation and plinth.
787.38
-
4845.81
Reinforced cement concrete M-25 mechanicaly batch mixed using batch type concrete mixer as per IS:1791 and vibrated by needle vibrator but excluding steel reinforcement centring and shuttering in supersturcture.Total Ground Floor + First Floor + Second Floor + Third Floor + Fourth Floor
1192.08
-
5251.11
Extra rate for First Floor
287.41
-
40.8
Extra rate for Second Floor
293.68
-
81.6
Extra rate for Third Floor
290.93
-
122.4
Extra rate for Fourth Floor
22.27
-
163.2
Shuttering for faces of concrete foundations and foundation beam & plinth beam (vertical or battering)
1267.02
-
158.31
Centring and shuttering for columns (Square or rectangular or poly gonal in plain)Total Ground Floor + Second Floor + Third Floor
1908.88
-
242.01
Extra rate for First Floor
400.96
-
2.7
Extra rate for Second Floor
400.96
-
5.4
Extra rate for Third Floor
400.96
-
8.1
Centring and shuttering for flat surfaces such as suspended floors, roofs, landings, chajjas, shelves etc.Total Ground Floor + Second Floor + Third Floor + Fourth Floor
5580.03
-
204.01
Extra rate for First Floor
1327.12
-
2.7
Extra rate for Second Floor
1327.68
-
5.4
Extra rate for Third Floor
1374.31
-
8.1
Extra rate for Third Floor
146.93
-
10.8
Centring and shuttering for sides and soffits of beam, beams launchings girders bressumers, lintelsTotal Ground Floor + Second Floor + Third Floor + Fourth Floor
2559.36
-
188.73
Extra rate for First Floor
621.36
-
2.7
Extra rate for Second Floor
671.28
-
5.4
Extra rate for Third Floor
600.08
-
8.1
Extra rate for Fourth Floor
35.68
-
10.8
Centring and shuttering for columns (circular or curved in plain) Total Ground Floor
30
-
262.63
Plastering on underside of ceiling 10 mm thick cement plaster 1:4
3854.3
-
102.76
First class burnt brick work laid in cement sand mortar 1:6 in foundation and plinth.
189.58
-
3519.43
Damp proof course 4 cm thick of cement concrete 1 : 2 : 4 with 2 coats of bitument 20/30 penetration at 1.65 kg per Sqm. laid hot and sanded.
56.39
-
284.66
First class burnt brick work laid in cement sand mortar 1:6 in first storey upto 4 metres above plinth level. Total Ground Floor + Second Floor + Third Floor + Fourth Floor
415.63
-
3800.63
Extra rate for First Floor
92.53
-
84.48
Extra rate for Second Floor
79.59
-
168.97
Extra rate for Third Floor
79.85
-
253.45
Extra rate for Fourth Floor
90.5
-
337.94
First class burnt brick work laid in cement sand mortor 1:4 in first storey upto 4 metres above plinth level. Total Ground Floor + Second Floor + Third Floor + Fourth Floor
411.19
-
4032.15
Extra rate for 4.00 Mtr upto 6.00 Mtr
45.53
-
84.48
Extra rate for 6.00 Mtr upto 8.00 Mtr
45.53
-
168.97
Extra rate for 8.00 Mtr upto 10.00 Mtr
45.53
-
253.45
Extra rate for 10.00 Mtr upto 12.00 Mtr
45.53
-
337.94
Extra rate for 12.00 Mtr upto 14.00 Mtr
45.53
-
422.42
Extra rate for 14.00 Mtr upto 16.00 Mtr
45.53
-
506.91
Extra rate for 16.00 Mtr upto 18.00 Mtr
45.53
-
591.39
Extra rate for 18.00 Mtr upto 20.00 Mtr
6.84
-
675.88
115 mm thick brick wall with every fourth course reinforced with hoop iron laid in 1 :4 cement sand mortar in super structure. Total Ground Floor + First Floor + Second Floor + Third Floor
4399.01
-
552.91
Extra rate for First Floor
1046.89
-
6.08
Extra rate for Second Floor
923.62
-
12.15
Extra rate for Third Floor
1134.9
-
18.23
12.5mm thick cement plaster 1:5.
4497.03
-
105.92
20 mm thick cement plaster 1:5.
4497.03
-
143.43
12.5 mm thick cement plaster 1:4.
2086.56
-
116.29
20mm thick cement plaster 1:4.
2086.56
-
157.72
Khurra on roof as per item No. 13.45 with CI Spouts 100 mm dia fixed in position.
10
-
109.94
Embedding 100mm dia CI rain water non pressure ISI mark pipe in cement mortar during masonry work.
181.73
-
952.89
Providing and fixing cast iron shoe for rain water pipe on wooden plugs fixed on wall face including filling the joints with spun yarn and cement mortar 1:2.
12
-
608.66
Providing & Fixing in position M.S or heavy flat iron clamps made out of M.S flat iron not less than 5 mm of the approved design for fixing C.I. soil waste, vent or antisyhonage pipes to walls complete in all respects including cutting and making good the walls and floors etc. and painting. M.S. Holder bats clamps for 100mm i/d H.C.I. pipes
99
-
164.5
Top khurra 0.6m x 0.6m for rain water pipe in 25mm thick cement concrete 1:2:4 over 50mm thick cement concrete 1:8:16.
12
-
92.85
Providing and fixing in position gratings 150mm x 150mm for gully trap.
PVC grating
12
-
76
Bottom Khurra on ground 1.2m. x 0.6m. consisting of brick on-edge laid in cement mortar 1:3 over 75mm cement concrete 1:8:16 including 12.5m.m. thick cement plaster 1:3.
12
-
550.6
Terracing consisting of tiles 22.86 cm x 11.43 cm x 3.81 cm laid over 25mm mud plaster, 75 mm mud filling on another layer of 25 mm mud plaster including two coats of bitumen laid hot @ 1.65 Kg. per Sqm. on top of R.C.C slab including grouting with cement
1030.65
-
553.41
Cement concrete 1:2:4 gola 10cm x 10cm concave quadrant along junction of roofs with parapet wall finished smooth, where specially specified.
174.41
-
51.63
Earth filling under floors with surplus ordinary soil or soil containing gravel or kankar upto 40% taking outside the premises in 15 cm layers incluidng ramming, watering and consolidated all lead .
1770.22
-
272.16
Base course of floor consisting of 100mm thick cement concrete 1:8:16 with stone aggregate and 100mm sand filling (Using mechanical mixer for mixing of material)
973.03
-
322.31
Extra rate for using 1:3:6 instead off 1:8:16 in basecourse and using vibrator.
98.71
-
894.55
Screed of 50mm thick cement concrete 1:8:16 to be laid below the topping (Using mechanical mixer for mixing of material). Total First Floor + Second Floor + Third Floor + Fourth Floor
2497.13
-
129.98
Extra rate for First Floor
812.57
-
2.6
Extra rate for Second Floor
816.28
-
5.2
Extra rate for Third Floor
848.19
-
7.8
Extra rate for Fourt Floor
20.09
-
10.4
Extra rate for using 1:3:6 instead off 1:8:16 in screed and using vibrator.
126.28
-
894.55
Coloured Granite stone tiles 20mm thick in skirting, risers of steps, dado walls and pillars laid in 12.5mm thick cement mortar 1:3 (1 cement 3 coarse sand) and jointed with neat cement slurry mixed with pigment to match the shade of stone, including rubbing and polishing including labour for fixing dowel pins and cramps. Total Ground Floor + First Floor + Second Floor +Third Floor+ Fourth Floor
1099.67
-
4855.93
Extra rate for First Floor
234.48
-
2.7
Extra rate for Second Floor
244.66
-
5.4
Extra rate for Third Floor
228.55
-
8.1
Extra rate for Fouirth Floor
21.67
-
10.8
Coloured Granite stone tiles 20mm thick in skirting, risers of steps, dado walls and pillars laid in 12.5mm thick cement mortar 1:3 (1 cement 3 coarse sand) and jointed with neat cement slurry mixed with pigment to match the shade of stone, including rubbing and polishing including labour for fixing dowel pins and cramps. Ground Floor
2.48
-
4855.93
Providing etching 25mm wide on Stair Treads of Granite Stone with stone cutting machine/grinder Complete as per specification & desired by Engineer-in-Charge.
444.38
-
196.67
Extra labour for projected nosing of stair case of any shape and design
148.13
-
36.84
Providing and laying vitrified floor tiles of Size 600 x 600 mm in different sizes in light colour shades made using Double Charge technology (thickness to be specified by the manufacturer) with water absorption’s less than 0.08% and conforming to IS : 15622 of approved make in all colours and shades, laid on 20mm thick cement mortar 1:4 (1 cement: 4 fine sand), complete. (Design is homogenous throughout the tile body). Total of Marked (a+b) :-
4255.53
-
1579.58
Extra rate for First Floor
991.18
-
2.7
Extra rate for Second Floor
1166.79
-
5.4
Extra rate for Third Floor
1115.7
-
8.1
Extra Rate for difference in cost of double charged vitrified tile 32" x 32" Used Instead of double charged vitrified tile 24" x 24"
998.35
-
351
Extra Rate for pasting marble chips on backside of vitrified tile to be pasted with aroldite complete as per specifications & as desired by Enginneer-in-Charge.
321.95
-
259
Providing & fixing 16 gauge stainless steel pipe railing of grade 304 duly fixed on steps with the help of bolts grouted on steps with hand rail and newel post of 50mm dia Stainless steel pipe, Balusters of 40mm dia Stainless steel pipe and guard 3 Nos of 15mm dia Stainless Steel pipe complete in all respect
36.57
-
3633.22
Providing & fixing 16 gauge stainless steel pipe of various sizes railing of grade 304 duly fixed on side wall with the help of bolts fixed with hand rail, S.S square bar 25 x 25mm welded to S.S flat 50 x 5mm complete in all respect as per specification and entire satisfaciton of Engineer-in-Charge. (Railing along wall in Stair for upper storey Design as per guidelines issued for persons with disability)
63.4
-
2790
Providing & fixing 16 gauge stainless steel pipe of top of various size railing of grade 304 duly fixed on ramp with the help of bolts grouted on floor with hand rail and newel post of 50mm dia Stainless steel pipe , Balusters of 40mm dia Stainless steel pipe complete in all respect as per specification and entire satisfaciton of Engineer-in-Charge. (Railing on Enterance Ramp Design as per guidelines issued for persons with disability)
11.35
-
3861
Conglomerate floor 50mm thick cement concrete topping 1:2:4 (Using mechanical mixer for mixing of material). Ground Floor
43.9
-
204.21
Providing and Laying Out Door Precast Designer chequered tiles of any size & any shape 25mm thickness having top layer of white cement mixed with pigment, laid on 20mm thick bed of ordinary cement mortar 1:3(1 ordinary cement :3 fine sand), joints grouted with white cement slurry containing pigment to match the shade complete in all respect as per specifications and to the entire satisfaction of engineer- in- charge. Ground Floor
15.75
-
1018.33
Factory manufactured flush door fixed in position iron hinges, etc (excluding the cost of any fittings other than specified above but including labour for fixing the same in position (Code : II Revision IS-2191 Part-I) 1973,
Commercial with elm or gurjan facing on both \ Sides with laminated core and lipped edges:- 35mm Thick
280.08
-
2930.42
Extra Cost for Providing and fixing 1 mm thick laminate/Sunmica (make and shade as approved by Engineer in Charge) on either side of flush doors / cupbard door shutters fixed with glue correct in finishing complete as per architectural drawings and directions of engineer-in-charge.
560.16
-
1378
Cost of Aluminium fittings complete for doors, windows such as tower bolts, handless and screw etc. for these fittings (Excluding sliding bolt)
280.08
-
150.3
Providing and fixing CP sliding door bolts ISI marked anodized (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade with nuts and screws etc. complete :
300mm x 16mm
200
-
126.56
Wrought iron and mild steel ladders, framed grills, grating etc. with ends of bars, riveted or welded or forged, framed window guards, barred iron doors, stair case, iron railing including cost of bolts and nuts or screws or welding rod, complete fixed in position.
145.01
-
8480.73
Extra for providing Polyster Powder Coating 60 to 70 micron any coloured specified to M.S Grills section of various sizes including carriage of material from market to workshop
14501.25
-
19.83
Providing & Fixing of 10 guage welded mesh of 25mm x 25mm size fixed on steel glazing with M S flat 20mm x 6mm beeding complete in all respect including painting two coats with Synthetic Enamel Paint and Priming coat.
112.87
-
611.35
Providing precast cement concrete Jali 1:2:4 (1 cement: 2 coarse sand : 4 graded stone aggregate 6mm nominal size) reinforced with 1.6 mm dia mild steel wire including centring and shuttering, roughening cleaning, fixing and finishing in cement mortar 1:3
50 mm thick
56.44
-
1365.95
Providing and fixing M.S. angle iron 40x40x6mm chowkat including iron hold fasts butt hinges fixed in position, finished with red lead non setting primer complete in all respect
For single rebate.
394.7
-
84.39
Providing and fixing of false ceiling at all heights of 600x600x15mm/600*1200*15mm Mineral Fibre ceiling tiles RH-99 laid in grid system. The frame work comprise of made of GI 120 GSM coating with minimum 0.3mm thickness main runner spaced at 1200mm centre to centre securely fixed to the structural soffit by approved hangers at 1200mm maximum centres. Hangersa (GI wire of 4mm dia) to be fixed by approved roof plug, level adjusters and screw etc. The last hanger at the end of each main runner should not be greater than 450mm from the adjacent wall. Flush fitting 1200mm long cross tees (with double stiching) to be interlocked between main runners at 600mm centres to form 1200x600mm modules. Cut across tees longer than 600mm to be supported independently. 600x600mm modules to be formed by fitting 600mm long flush fitting cross tees centrally between the 1200mm cross tees. Perimeter trim to be wall angle secured to walls at 450mm maximum centres complete in all respects as per specifications.
2228.44
-
1286.09
Providing and Fixing ceiling consisting of 600mmX600mmX12.5mm thick Gypsum Board GI Cradling hanged from the ceiling by means of GI hanger complete as per drawings,specifications and to the entire satisfaction of engineer-in- charge.
183.66
-
962.33
Cold twisted deformed (Ribbed/ Tor Steel Bar/TMT) Bars Fe 500 grade as per IS 1786-2008, for R.C.C works, where not including in the complete rate of RCC including bending and placing in position complete Total Ground Floor + First Floor + Second Floor + Third Floor + Fourth Floor
2269.42
-
5993.65
Extra rate for First Floor
346.11
-
12
Extra rate for Second Floor
352.37
-
24
Extra rate for Third Floor
349.78
-
36
Extra rate for Fourth Floor
22.27
-
48
Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/appropriate z sections and other sections conforming to Is: 733 and IS : 1285 of Jindal, Hindalco, Mahavir or equivalent make approved by Engineer in Charge , fixed with rawl plugs and screws or with fixing clips, or with expansion hold fasteners including necessary filling up of gaps at junctions, at top, bottom and sides with required PVC Plug/neoprene felt etc. Aluminium sections shall be smooth, rust free, straight, mitered and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing/paneling, C.P.brass/stainless steel screws, all complete as per architectural drawings and the directions of Engineer-In-Charge. (Glazing and paneling to be paid for separately) : For fixed portion
7618.64
-
339.17
For Openable portion
7129.3
-
351.84
Providing and fixing 5mm thick ACP Sheet, in paneling fixed in aluminium doors and partition frames with PVC Plug/ neoprene gasket etc. . complete as per architectural drawings and directions of engineer-in-charge. (Cost of aluminium snap beading shall be paid in basic item of Aluminium)
191.92
-
2136
Providing and fixing double action hydraulic floor spring of approved brand and manufacture IS : 6315 marked, for doors including cost of cutting floors as required, embedding in floors and cover plates with brass pivot and single piece MS sheet outer box with slide plate and with stainless steel cover plate etc. complete as per the direction of Engineer-in-charge.
156
-
2252.24
Providing and fixing glazing 5.5mm thick toughned glass in aluminium door, window, ventilator shutters and partitions etc. with PVC Plug/ neoprene gasket etc. complete as per the architectural drawings and the directions of engineer-in-charge . (Cost of aluminium snap beading shall be paid in basic item)
616.83
-
1450
Providing an fixing MS of Double action spring hinges with necessary screws etc. complete
150mm
40
-
356.3
Extra for providing Polyster Powder Coating 50 micron any coloured specified to aluminium section of various sizes including carriage of material from market to workshop.
14747.94
-
50.81
Preparation of plastered or concrete surface for painting (including sand papering the surface) using ready mixed cement based wall putty by applying two coats to get required finish
14793.02
-
49.48
Applying priming coat with cement primer in all shade on newly plastered or concrete exterior surface
10619.91
-
20.81
Wall painting with plastic emulsion paint of approved brand and manufacturer to give an even shade (two coats)
10619.91
-
79.34
Finishing walls with Premium Acrylic smooth exterior paint with silicon additives of required shade with two coats applied @ 1.43litre/10 sqm over and including base coat of water proofing Cement Paint applied @ 2.20 Kg/10 sqm
4173.11
-
81.45
Providing and Fixing of Copper Sheet 16 Gauge 350mm wide in "V" or "U" shape on expansion joint including covering with C. Concrete complete in all respect as per specificationsand to the entire satisfaction of engineer- in- charge.
66.44
-
3276.36
Providing and fixing covering 200mm wide Aluminium Sheet 14 Gauge with gatties and screw on vertical expansion joints one side fixed and one side fixed with slotted holes to allow movement complete in all respect as per specifications and to the entire satisfaction of engineer- in- charge.
121.91
-
413.11
Construction of Plinth protection complete as per drawing.
Earth work in exavation in foundations, trenches, etc. in all kinds of soil where pick jumper work is not involved and not exeeding 2.0 Mtr. depth and subsequent filling around masonary in 15 cm layers with compaction including disposal of all surplus soil as directed within a lead of 30 Mtr. complete in all respect as per specifcation, drawing and to the entire satisfication of Engineer-In-Charge.
32.47
-
119.3
Cement Concrete 1:8:16 with 40mm guage stone aggregate using concrete mixing volumetric type
10.82
-
2293.23
First class burnt brick work laid in cement sand mortar 1:5 in foundation and plinth.
33.83
-
3624.68
Base course of floor consisting of 100mm thick cement concrete 1:8:16 with stone aggregate and 100mm sand filling (Using mechanical mixer for mixing of material)
153.98
-
322.31
Conglomerate floor 40mm thick cement concrete topping 1:2:4 (Using mechanical mixer for mixing of material).
189.52
-
167.42
Floating coat of 1.5mm thick neat cement laid in one operation to the topping.
189.52
-
88.22
12.5 mm thick cement plaster 1:5 complete in all respect as per specifcation, drawing and to the entire satisfication of Engineer-In-Charge.
94.76
-
105.92
Construction of Connecting Corridoor (A2)
Earth work in excavation in foundations, trenches etc. in all kinds of soil where pick jumper work is not involved and not exceeding 2.0 metres depth including dressing of bottom and sides of trenches, stacking the excavated soil clear from the edge of excavation and subsequent filling around masonry in 15 cm. layers with compaction including disposal of all surplus soil as directed within a lead of 30 metres.
190.32
-
119.3
Providing and applying Anti Termite Treatment using pre constructional chemical treatment measures as per IS - 6313 - 2001 ( Part 2 ) & using Chemical containing chloropyrifos systemic insecticide diluted to manufacturer's specifications (i) In foundation pits, by treating the bottom & sides up to height of 300mm by uniformly spraying solution @ 5 Litre / sqm (ii) In the refill earth on both sides of all built up walls @ 7.5 Litre / Running meter (width - 300 mm, depth - 450 mm) (iii) Before laying the floor, by uniformly sprinkling the top surface of the consolidated earth within the outer perimeter @ 5 Litre solution per sqm.
123.52
-
336.36
Cement concrete 1:5:10 with 40 mm gauge stone ballast. using concrete mixing volumetric type
16.91
-
2613.94
Reinforced cement concrete M-25 mechanicaly batch mixed using batch type concrete mixer as per IS:1791 and vibrated by needle vibrator but excluding steel reinforcement centring and shuttering in foundation and plinth.
56.86
-
4845.81
Reinforced cement concrete M-25 mechanicaly batch mixed using batch type concrete mixer as per IS:1791 and vibrated by needle vibrator but excluding steel reinforcement centring and shuttering in supersturcture. Total Ground Floor + First Floor + Second Floor + Third Floor + Fourth Floor
276.03
-
5251.11
Extra rate for First Floor
68.8
-
40.8
Extra rate for Second Floor
68.8
-
81.6
Extra rate for Third Floor
69.83
-
122.4
Shuttering for faces of concrete foundations and foundation beam & plinth beam (vertical or battering)
87.89
-
158.31
Centring and shuttering for columns (Square or rectangular or poly gonal in plain) Total Ground Floor + Second Floor + Third Floor
289.12
-
242.01
Extra rate for First Floor
61.04
-
2.7
Extra rate for Second Floor
61.04
-
5.4
Extra rate for Third Floor
61.04
-
8.1
Centring and shuttering for flat surfaces such as suspended floors, roofs, landings, chajjas, shelves etc. Total Ground Floor + Second Floor + Third Floor + Fourth Floor
1008.14
-
204.01
Extra rate for First Floor
248.57
-
2.7
Extra rate for Second Floor
248.57
-
5.4
Extra rate for Third Floor
262.43
-
8.1
Centring and shuttering for sides and soffits of beam, beams launchings girders bressumers, lintels Total Ground Floor + Second Floor + Third Floor + Fourth Floor
624.32
-
188.73
Extra rate for First Floor
156.08
-
2.7
Extra rate for Second Floor
156.08
-
5.4
Extra rate for Third Floor
156.08
-
8.1
Centring and shuttering for faces of walls, partitions, retaining walls and the like (vertical or bartering including attached pillasters buttersses etc Total Ground Floor + Second Floor + Third Floor
712.79
-
269.06
Extra rate for First Floor
149.89
-
2.7
Extra rate for Second Floor
149.89
-
5.4
Extra rate for Third Floor
141.44
-
8.1
Plastering on underside of ceiling 10 mm thick cement plaster 1:4
742.16
-
102.76
First class burnt brick work laid in cement sand mortar 1:6 in foundation and plinth.
28.21
-
3519.43
Damp proof course 4 cm thick of cement concrete 1 : 2 : 4 with 2 coats of bitument 20/30 penetration at 1.65 kg per Sqm. laid hot and sanded.
4.26
-
284.66
First class burnt brick work laid in cement sand mortar 1:6 in first storey upto 4 metres above plinth level.. Total Ground Floor + Second Floor + Third Floor + Fourth Floor
88.64
-
3800.63
Extra rate for First Floor
18.61
-
84.48
Extra rate for Second Floor
18.61
-
168.97
Extra rate for Third Floor
18.61
-
253.45
Extra rate for Fourth Floor
14.2
-
337.94
12.5mm thick cement plaster 1:5.
226.01
-
105.92
20 mm thick cement plaster 1:5 in two coats work.
226.01
-
143.43
12.5 mm thick cement plaster 1:4.
400.13
-
116.29
20mm thick cement plaster 1:4 in two coat work.
400.13
-
157.72
Khurra on roof as per item No. 13.45 with CI Spouts 100 mm dia fixed in position.
4
-
109.94
Embedding 100mm dia CI rain water non pressure ISI mark pipe in cement mortar during masonry work.
80.77
-
952.89
Providing and fixing cast iron shoe for rain water pipe on wooden plugs fixed on wall face including filling the joints with spun yarn and cement mortar 1:2.
5
-
608.66
Providing & Fixing in position M.S or heavy flat iron clamps made out of M.S flat iron not less than 5 mm of the approved design for fixing C.I. soil waste, vent or antisyhonage pipes to walls complete in all respects including cutting and making good the walls and floors etc. and painting. M.S. Holder bats clamps for 100mm i/d H.C.I. pipes
44
-
164.5
Top khurra 0.6m x 0.6m for rain water pipe in 25mm thick cement concrete 1:2:4 over 50mm thick cement concrete 1:8:16.
5
-
92.85
Providing and fixing in position gratings 150mm x 150mm for gully trap.
PVC grating
5
-
76
Bottom Khurra on ground 1.2m. x 0.6m. consisting of brick on-edge laid in cement mortar 1:3 over 75mm cement concrete 1:8:16 including 12.5m.m. thick cement plaster 1:3.
5
-
550.6
Terracing consisting of tiles 22.86 cm x 11.43 cm x 3.81 cm laid over 25mm mud plaster, 75 mm mud filling on another layer of 25 mm mud plaster including two coats of bitumen laid hot @ 1.65 Kg. per Sqm. on top of R.C.C slab including grouting with cement
192.76
-
553.41
Cement concrete 1:2:4 gola 10cm x 10cm concave quadrant along junction of roofs with parapet wall finished smooth, where specially specified.
79.74
-
51.63
Earth filling under floors with surplus ordinary soil or soil containing gravel or kankar upto 40% taking outside the premises in 15 cm layers incluidng ramming, watering and consolidated all lead .
306.17
-
272.16
Base course of floor consisting of 100mm thick cement concrete 1:8:16 with stone aggregate and 100mm sand filling (Using mechanical mixer for mixing of material)
185.54
-
322.31
Extra rate for using 1:3:6 instead off 1:8:16
18.82
-
894.55
Screed of 50mm thick cement concrete 1:8:16 to be laid below the topping (Using mechanical mixer for mixing of material). Total First Floor + Second Floor + Third Floor + Fourth Floor
467.37
-
129.98
Extra rate for First Floor
155.79
-
2.6
Extra rate for Second Floor
155.79
-
5.2
Extra rate for Third Floor
155.79
-
7.8
Extra rate for using 1:3:6 instead off 1:8:16
2.2
-
894.55
Coloured Granite stone tiles 20mm thick in skirting, risers of steps, dado walls and pillars laid in 12.5mm thick cement mortar 1:3 (1 cement 3 coarse sand) and jointed with neat cement slurry mixed with pigment to match the shade of stone, including rubbing and polishing including labour for fixing dowel pins and cramps.Total Ground Floor + First Floor + Second Floor +Third Floor+ Fourth Floor
853.83
-
4855.93
Extra rate for First Floor
206.02
-
2.7
Extra rate for Second Floor
206.02
-
5.4
Extra rate for Third Floor
206.02
-
8.1
Provision for Grooves for Stair Treads in Granite Stone Complete as per specification & desired by Engineer-in-Charge.
592.5
-
300
Extra labour for projected nosing of stair case of any shape and design
197.5
-
36.84
Providing & fixing 16 gauge stainless steel pipe railing of grade 304 duly fixed on steps with the help of bolts grouted on steps with hand rail and newel post of 50mm dia Stainless steel pipe, Balusters of 40mm dia Stainless steel pipe and guard 3 Nos of 15mm dia Stainless Steel pipe complete in all respect
36.57
-
3633.22
Providing & fixing 16 gauge stainless steel pipe of various sizes railing of grade 304 duly fixed on side wall with the help of bolts fixed with hand rail, S.S square bar 25 x 25mm welded to S.S flat 50 x 5mm complete in all respect as per specification and entire satisfaciton of Engineer-in-Charge. (Railing along wall in Stair for upper storey Design as per guidelines issued for persons with disability)
71.85
-
2790
Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/appropriate z sections and other sections conforming to Is: 733 and IS : 1285 of Jindal, Hindalco, Mahavir or equivalent make approved by Engineer in Charge , fixed with rawl plugs and screws or with fixing clips, or with expansion hold fasteners including necessary filling up of gaps at junctions, at top, bottom and sides with required PVC Plug/neoprene felt etc. Aluminium sections shall be smooth, rust free, straight, mitered and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing/paneling, C.P.brass/stainless steel screws, all complete as per architectural drawings and the directions of Engineer-In-Charge. (Glazing and paneling to be paid for separately) : For fixed portion
125.27
-
339.17
For Openable portion
1048.6
-
351.84
Providing and fixing glazing 5.5mm thick toughned glass in aluminium door, window, ventilator shutters and partitions etc. with PVC Plug/ neoprene gasket etc. complete as per the architectural drawings and the directions of engineer-in-charge . (Cost of aluminium snap beading shall be paid in basic item)
104.86
-
1450
Extra for providing Polyster Powder Coating 50 micron any coloured specified to aluminium section of various sizes including carriage of material from market to workshop.
1421.37
-
50.81
Cost of Aluminium fittings complete for doors, windows such as tower bolts, handless and screw etc. for these fittings (Excluding sliding bolt)
104.86
-
150.3
Wrought iron and mild steel ladders, framed grills, grating etc. with ends of bars, riveted or welded or forged, framed window guards, barred iron doors, stair case, iron railing including cost of bolts and nuts or screws or welding rod, complete fixed in position.
2.48
-
8480.73
Providing and fixing glazing 5.5mm thick toughned glass in aluminium door, window, ventilator shutters and partitions etc. with PVC Plug/ neoprene gasket etc. complete as per the architectural drawings and the directions of engineer-in-charge . (Cost of aluminium snap beading shall be paid in basic item)
7.66
-
1450
Cold twisted deformed (Ribbed/ Tor Steel Bar/TMT) Bars Fe 500 grade as per IS 1786-2008, for R.C.C works, where not including in the complete rate of RCC including bending and placing in position complete Total Ground Floor + First Floor + Second Floor + Third Floor + Fourth Floor
420.74
-
5993.65
Extra rate for First Floor
88.11
-
12
Extra rate for Second Floor
88.11
-
24
Extra rate for Third Floor
88.81
-
36
Preparation of plastered or concrete surface for painting (including sand papering the surface) using ready mixed cement based wall putty by applying two coats to get required finish
1994.44
-
49.48
Applying priming coat with cement primer in all shade on newly plastered or concrete exterior surface
1194.18
-
20.81
Wall painting with plastic emulsion paint of approved brand and manufacturer to give an even shade (two coats)
1194.18
-
79.34
Finishing walls with Premium Acrylic smooth exterior paint with silicon additives of required shade with two coats applied @ 1.43litre/10 sqm over and including base coat of water proofing Cement Paint applied @ 2.20 Kg/10 sqm
800.26
-
81.45
Providing and Fixing of Copper Sheet 16 Gauge 350mm wide in "V" or "U" shape on expansion joint including covering with C. Concrete complete in all respect as per specificationsand to the entire satisfaction of engineer- in- charge.
37.38
-
3276.36
Providing and fixing covering 200mm wide Aluminium Sheet 14 Gauge with gatties and screw on vertical expansion joints one side fixed and one side fixed with slotted holes to allow movement complete in all respect as per specifications and to the entire satisfaction of engineer- in- charge.
121.91
-
413.11
Construction of Plinth protection complete as per drawing.
Earth work in exavation in foundations, trenches, etc. in all kinds of soil where pick jumper work is not involved and not exeeding 2.0 Mtr. depth and subsequent filling around masonary in 15 cm layers with compaction including disposal of all surplus soil as directed within a lead of 30 Mtr. complete in all respect as per specifcation, drawing and to the entire satisfication of Engineer-In-Charge.
3.54
-
119.3
Cement Concrete 1:8:16 with 40mm guage stone aggregate using concrete mixing volumetric type
1.42
-
2293.23
115 mm thick brick wall laid in cement mortar 1 :4 without reinforcement in foundation and plinth complete in all respect as per specifcation, drawing and to the entire satisfication of Engineer-In-Charge.
14.86
-
473.38
Base course of floor consisting of 100mm thick cement concrete 1:8:16 with stone aggregate and 100mm sand filling (Using mechanical mixer for mixing of material)
13.94
-
322.31
Conglomerate floor 40mm thick cement concrete topping 1:2:4 (Using mechanical mixer for mixing of material).
16.72
-
167.42
Floating coat of 1.5mm thick neat cement laid in one operation to the topping.
16.74
-
88.22
12.5 mm thick cement plaster 1:5 complete in all respect as per specifcation, drawing and to the entire satisfication of Engineer-In-Charge.
11.15
-
105.92
Construction of Water Tank 50000 ltr (A3)
Reinforced cement concrete M-40 mechanicaly batch mixed using batch type concrete mixer as per IS:1791 and vibrated by needle vibrator but excluding steel reinforcement centring and shuttering in supersturcture.
13.35
-
6061.6
Extra rate for fifth Floor
117.28
-
204
Centring and shuttering for columns (Square or rectangular or poly gonal in plain)
3.2
-
242.01
Centring and shuttering for flat surfaces such as suspended floors, roofs, landings, chajjas, shelves etc.
52.97
-
204.01
Centring and shuttering for sides and soffits of beam, beams launchings girders bressumers, lintels
14.24
-
188.73
Centring and shuttering for faces of walls, partitions, retaining walls and the like (vertical or bartering including attached pillasters buttersses etc
61.75
-
269.06
Cold twisted deformed (Ribbed/ Tor Steel Bar/TMT) Bars Fe 500 grade as per IS 1786-2008, for R.C.C works, where not including in the complete rate of RCC including bending and placing in position complete
16.82
-
5993.65
Providing and fixing 1st quality ceramic glazed wall tiles conforming to IS : 15622 (thickness to be specified by the manufacture of approved make in all colours, shades except burgundy, bottle green, black of size 250 x 330 300 x 300mm mm as approved by Engineer-in-Charge in skirting, risers of steps and dados over 12 mm thick bed of cement Mortar 1:4 (1 cement: 4 coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm including pointing in white cement mixed with pigment of matching shade complete.
63.17
-
735.14
Providing & fixing 560 mm, 500 mm and 450 mm internal diametre circular or 450 mm x 600 mm clear inside opening rectangular RCC manhole cover and frame ISI marked as per IS:12592-2002 including carriage from the stores of the Engineer-in-charge to site of work, loading, unloading including stacking and setting the same to correct lines over manholes including cement concrete copping (M:20) around the frame etc. Dia of steel for lifting hook is 16mm. (for EHD and HD).
560 mm id R.C.C. Manhole cover with frame Medium duty
2
-
1471.49
Providing orange colour safety footrest of minimum 6mm thick plastic encapsulated as per IS:10910 on 12mm dia steel bar confirming to IS: 1786 having minimun cross section as 23mm x 25mm and over all minimum length 263mm and width as 165mm with minimum 112mm space between protruted legs having 2mm tread on top surface by ribbing or chequering besides necessary and adequate anchoring projections on tail length on 138 mm as per standard drawing and suitable to with stand the bend test and chemical resistance test as per specification and having manufacturer's permanent identification mark to be visible even after fixing, including fixing in manholes with 230x150x75cm cement concrete block 1:2:4 (1 cement: 2 sand: 4 stone aggragate) complete as per design.
16
-
144.74
Tactile guiding path, Safety Sinage & Emergency Exit for Person with Disability (A4)
Providing and Laying Tactile Flooring of size 300mm*300mm 10mm thickness in ordinary grey cement with chips and top layer of white cement mixed with pigment laid on 20mm thick bed of cement mortar 1:3 with neat cement slurry between joints with White Cement slurry containing pigment to match the shade complete in all respect.
185.8
-
2433
Providing and Installation of Safety signage as per guidline for person with disability made of retro reflective sheeting as per colour specified and writing matter will be of same material in white fixed / pasted over 4mm thick aluminium composite sheet, including cost of writing matter with braille also firmly fixed on wall with nylone fastner, brass screw and washer complete as per specification and as desired by engineer in charge.
42.6
-
8352
Informatory sign board 800x600mm rectangular with high intensity Microprismatic grade retro reflective Sheeting Type XI as per ASTM D 4956 – 09 fixed over 4mm thick aluminium Composite material (ACM) sheeting having aluminium skin thickness of 0.4 to 0.5 mm on both sided and fixing the same with suitable size aluminium alloy riverts @ 200 mm c/c to back support frame of 25x25x3mm angle iron supported on a mild steel angle iron post 65x65x6mm without cost of definition plate firmly fixed to ground in foundation concrete M-25 of size 0.45x0.45x0.60m for vertical post complete as per specifications.
2
-
6743.36
Providing and laying 50 mm wide contrast colour bands on edge of tread fixed with apoxy based adhesive complete as per specifications, Harmonised guidelines for PwD and as desired by engineer-in-charge.
148.13
-
1000
Providing and installation of Tectile layout plan of building along with braille and audio systems at entrance of the building size 6'-0"x4'-0" complete as per specifications , Harmonised guidelines for PwD and as desired by engineer-in-charge. (Note: Design & Rate provided provisionaly but payment will be made as per actual workdone at site. )
4
-
30000
Providing and installation of Emergency Evacuation plan clearly indicating the designated emergency evacuated root as well as location of refugee area displayed at Public area of the Building size 6'-0"x4'-0" complete as per specifications , Harmonised guidelines for PwD and as desired by engineer-in-charge. (Note: Design & Rate provided provisionaly but payment will be made as per actual workdone at site. )
4
-
30000
Outer infrastructure (B1) Earth filling with good quality earth obtained from out side including compensation of earth, loading, unloading, carriage from outside the peremises to site of work, spreading, laying watering compacting with road roller complete as per specifications.
5103.74
-
272.16
Cement Concrete 1:4:8 with stone ballast of size using mechanical mixer
84.4
-
2841.91
Construction of unreinforced plain cement concrete pavement in M-30 mix design over a prepared sub base with cement contents 350kg per cum and coarse and fine aggregates conforming to IS:383 mixed with concrete mixer using weigh batcher, laid in position over 125 micron thick polythene sheet, compacted with needle vibrator, screed vibrator and plate vibrator, dewatering of free water with vaccum pump, finishing the surface with power floater, including provision of contraction and expansion joints as required, finishing to required lines and grades as per drawings and technical clause 1501 of MORD specifications
112.53
-
5202.76
Sub Work-1 Internal Water Supply, Sewerage, Sanitation
Sub Head-1 Internal Sewerage System
Providing and fixing in position H.C.I. soil waste vent or antisyphonage pipes to I.S.I. specification (IS:1729) of approved make (to the approval of Engineer-in-charge ) including cutting, jointing, wastage, but excluding cost of lead jointing.
100mm i/d H.C.I. pipe lines laid complete
454.13
-
1047
75mm i/d H.C.I. pipe lines laid complete
771.11
-
906.5
Providing and fixing in position H.C.I specials for soil waste vent or anti syphonage pipes to I.S.I specifications (IS:1729) of approved make (to the approval of Engineer-in-charge) including cutting and wastage etc. cutting holes in walls roofs or floors etc. and making good to its original condition but excluding cost of lead joining. For 100mm i/d pipes
Bend Plain
58
-
125
Cowls
15
-
415.5
Collars
81
-
449
junction with door
39
-
825
For 75mm i/d pipes
Bend Plains
15
-
424
Cowls
15
-
310.5
Collars
187
-
294.5
junction with door
125
-
563.5
Providing and fixing H.C.I. Floor traps conforming to I.S.I. Specification (IS:1729) of approved make (to the approval of Engineer-in-charge) of the self cleaning design with C.P. brass hinged grating with frame with or without vent arm and including cement concrete 1:2:4 under and around the floor trap where required upto floor level complete in all respects including cutting and making good the walls and floors,etc. minimum depth of water should be 150mm with a minimum seal 50mm.
With 75mm i/d outlet deep seal at Ground Floor
40
-
902
With 75mm i/d outlet shallow seal at First Floor
117
-
706
Providing lead caulked joints to H.C.I. pipes and specials conforming to I.S.I. Specification (IS:1729) of approved make (to the approval of Engineer-in-charge ) including cost of lead yarn, fuel and tools etc.
100mm i/d (1.36 kg.)
316.07
-
385.5
75mm i/d (1.13 kg.)
549.06
-
315
Providing & Fixing in position M.S or heavy flat iron clamps made out of M.S flat iron not less than 5 mm of the approved design for fixing C.I. soil waste, vent or antisyhonage pipes to walls complete in all respects including cutting and making good the walls and floors etc. and painting. M.S. Holder bats clamps for 110mm i/d SWRUPVC pipes
120
-
164.5
M.S. Holder bats clamps for 90mm i/d SWRUPVC pipes
120
-
147.5
Providing and fixing in position gully traps fixed in cement concrete 1:4:8 complete with Grating 150mm x 150mm, cover and frame clear opening 300mm x 300mm and out of side size 330mm x 330mm and chamber including cost of all bricks work in cement morter 1:5 cement concrete 1:2:4 in coping around cover and frame etc. as per standard design minimum depth of water should be 150 mm with a minimum seal 50mm.
100mm internal Diametre HCI gully trap with H.C.I. grating and cast iron cover weighing approximately 7.26 kg. and frame clear opening 300mm x 300mm and out of side size 330mm x 330mm
29
-
2413.5
Construction of brick masonry inspection chambers size as given below upto 0.60 m average depth in 1:5 cement sand mortar, lime concrete with 40 per cent lime mortar 2:3 in foundation, cement concrete 1:2:4 benching 12.50mm thick cement plaster 1:2 with a floating coat of 1mm thick of neat cement, R.C.C. 1:2:4 slabs 100mm thick cement concrete topping 50mm thick with 455mm x 455mm, 455mm x 610mm inside light duty C.I. inspection chamber cover and frame (Weight as per I.S.I specifications) painted with 3 coats of black bitumastic paint conforming to I.S.I complete as per standard design.
450mm x 600mm inside with 455mm x 610mm cover and frame light duty double seal
26
-
4106.9
Providing ,laying, jointing, fixing and testing ISI Marked G.I. Pipe (as per IS 1239) B-Class Premium make such as (Jindal Hisar) including cost of specials (such as tees, bends, sockets, elbows etc.) ,painting with anti corrosive bitumastic paint, testing, cutting, threading Inside building complete. 50mm i/d for FT to FT etc.
29.26
-
546
Sub Head-2 Internal Water Supply System
Providing ,laying, jointing, fixing and testing ISI Marked G.I. Pipe (as per IS 1239) B-Class Premium make such as (Jindal Hisar) including cost of specials (such as tees, bends, sockets, elbows etc.) ,painting with anti corrosive bitumastic paint, testing, cutting, threading Inside building complete. 15mm i/d
76.2
-
175
20mm i/d
243.83
-
218
25mm i/d
426.7
-
289
32mm i/d
60.96
-
367.5
40mm i/d
60.96
-
415.5
50mm i/d
60.96
-
546
Providing and laying, jointing, fixing, testing ISI Marked G.I. Pipe (as per IS 1239) B- Class,premium make such as (Jindal Hisar) including cost of Specials such as tees, bends, sockets elbow etc., cutting, threading and testing in trenches in the ground complete. 80mm i/d Vertical in Ducts
100
-
658.5
Cutting chase in brick walls in cement or in floor for embedding G.I. or C.I pipes lines and making good the same to its original condition. Size 75mm x 75mm qty same as GI P 15mm i/d to 25 mm
746.73
-
55.5
Cutting holes upto 23cm square through B.B. in cement walls or stone masonary wall in cement for pipes, and making good the same & finishing according to existing finish where required. Through wall 11.43 cm thick
80
-
112.5
Through wall 22.86 cm thick
80
-
160.5
Providing, fixing and jointing G.I Union Couplings(of approved make with the approval EIC) as per IS 1879 in G.I. Pipe lines complete in all respect.15mm i/d G.I. Union
40
-
86.5
20mm i/d G.I. Union
40
-
145.5
25mm i/d G.I. Union
40
-
184.5
32mm i/d G.I. Union
20
-
184.5
40mm i/d G.I. Union
20
-
184.5
50mm i/d G.I. Union
20
-
409
Providing, fixing and jointing Brass Ball valves screwed with SS/BRASS ball & spindle & Teflon seats, on G.I. Pipe lines including all carriages complete.
25mm i/d Brass Ball valves
48
-
528.5
32mm i/d Brass Ball valves
24
-
863.5
40mm i/d Brass Ball valves
24
-
1066.5
50mm i/d Brass Ball valves
24
-
1749.5
Painting G.I. Pipes and Specials with synthetic enamel Paint in all shades as per I.S.I. specification on existing or new work, two coats paints including cleaning rubbing surface, etc.
15mm & 20mm i/d G.I. Pipe
320.03
-
4
25mm & 32mm i/d G.I. Pipe
487.66
-
5.5
40mm & 50mm i/d G.I. Pipe
121.92
-
8.5
Sub Head - 3 Sanitary Installation
Providing and fixing in position Chinaware Indian Orisa water closet size 580mm of approved make (to the approval of the Engineer-in-charge) consisting of 10 ltr. PVC flushing cistern including cost of PVC long bend 32 mm dia complete in all respect and to the entire satisfaction of Engineer-in-charge.
8
-
4183.5
Providing and fixing in position Chinaware European type water closet P trap or S trap of approved make (to the approval of the Engineer in charge ) consisting of 10 ltr. PVC flushing cistern, PVC short bend 32mm dia including cost of seat cover complete in all respect and to the entire satisfaction of Engineer in charge.
44
-
3995.5
Providing and fixing jet spray with 2'-6" long PVC pipe.With PTMT nut
44
-
302
Providing & Fixing in position C.P. Brass Hexa Nipple 15mm of approved make (to the approval of Engineer-in-charge ) complete in all respect.
44
-
74.5
Providing and fixing in position vitreous Chinaware white large flat back or angular lipped front urinal 610 mm high of approved make (to the approval of the Engineer-in-charge) (610 mm x 410 mm x 380mm) consisting of C.P. waste 32 mm dia and C.P. brass spreader, complete.
16
-
5195
Providing and fixing in position vitreous chinaware white lavatory suites of approved make (to the approval of Engineer-in-charge) consisting of C.P. brass waste 32mm dia with one C.P. brass pillar tap complete in all respect. Size 49 cm dia (above counter round)
44
-
4173.5
Size 550 mm x 400 mm
45
-
2900.5
Providing and fixing in position best quality stainless steel sinks with complete fitting. Size 600 mm x 450 mm x 225 mm (Net size excluding flat edge)
4
-
8409.5
Providing and fixing in position vitreous Chinaware white laboratory sinks of approved make (to the approval of Engineer-in-charge) consisting of a pair of brackets, C.P. brass waste 40mm complete in all respect. Size 530 mm x 430 mm x 180 mm
9
-
5285.5
Providing & fixing in position best Indian make PVC flexible tube connection.
PVC tube connection of size 15 mm x 375 mm with PTMT nut
182
-
101.5
Providing and fixing PVC waste pipe 32mm complete in all respect.
102
-
121
Providing and fixing in position towel rails / ring of approved make (to the approval of Engineer-in-charge ) fixed in with rawl plugs embedded in walls with brass screws complete in all respect. C.P. brass towel Rails size 15mm dia 600mm long
32
-
1363.5
C.P brass towel ring
78
-
807.5
Providing and fixing in position C.P. brass soap dish of approved make (to the approval of Engineer-in-charge ) fixed into wall with rawl plugs and C.P brass screws complete in all respect.
82
-
743
Providing & Fixing in postion 15 mm i/d bib cock of approved make (to the approval of Engineer-in-charge )complete in all respect. C.P. brass Bib cock long nose/ long body without flange
55
-
1043
C.P Brass bib cock without flange
51
-
819
Providing & fixing 15 mm C.P brass laboratory cock swan neck of approved make (to the approval of Engineer-in-charge ) complete in all respect. Laboratory cock swan neck One Way
9
-
1173.5
Providing & Fixing in postion stop cock / Angle valve (as approved by the Engineer-in-charge). C.P.brass 15mm Angle valve
173
-
796
C.P.brass 15mm Concealed stop cock with flange
72
-
1185.5
Providing & Fixing in position C.P. Brass flange of approved make (to the approval of Engineer-in-charge ) under various fixtures complete in all respect.
351
-
52
Providing & Fixing in position C.P. Brass extension piece 25mm long to 50mm long of approved make (to the approval of Engineer-in-charge )with various fixtures complete in all respect.
351
-
89.5
Providing & Fixing in position 5mm thick bevelled edge mirror of superior glass (of approved make) complete with 4mm thick hard board backing fixed in with rawl plugs 50mm, C.P. brass screws and washers and S/S Studs on top complete in all respect (as required by the Engineer-in- Charge)
89
-
844
Providing and fixing in position C.P. brass overhead shower 1 flow with shower arm with 15mm i/d inlet of approved make (to the approval of Engineer-in-charge) complete in all respect.
28
-
1192
Providing and fixing in position C.P. brass overhead shower 1 flow with shower arm with 15mm i/d inlet of approved make (to the approval of Engineer-in-charge) complete in all respect.
15
-
2778.5
Providing and fixing in position paper holders of approved make (to the approval of Engineer-in-charge ) fixed in to wall with C.P brass screws complete in all respect. C.P. brass toilet paper holder
44
-
967.5
Providing & Fixing in position C.P./Aluminium Khunti of approved make (to the approval of Engineer-in-charge ) fixed into wall with C.P. brass screws and rawl plugs etc. complete in all respect.
C.P. Brass khunti with 3 pegs
113
-
518
Providing and fixing in postion storage type automatic electric water heater pressure / non pressure type thermostatically controlled, single phase, vertical wall mounted of approved make (to the approval of Engineer-in-charge) with thermostats, inner container of stainless steel complete with 1 Mtr. three core flexible cord with plug, non return valve and pressure release valve complete including fixing and testing complete in all respect.
25 litre capacity water heater
8
-
8551
Sub Head-4 Flooring and Wall Tile
Base course of floor consisting of 100mm thick cement concrete 1:8:16 and 100mm sand filling
Ground Floor
101.94
-
322.31
Supplying and filling cinder on roof (1st Storey) including light ramming. Total Ground Floor + First Floor + Second Floor
109.71
-
714.35
Extra rate for First Floor
34.8
-
2.5
Extra rate for Second Floor
43.48
-
5
Extra rate for Third Floor
31.43
-
7.5
Screed of 50mm thick cement concrete 1:8:16 to be laid below the topping. Total Ground Floor + First Floor + Second Floor
360.11
-
129.98
Extra rate for First Floor
114.23
-
2.6
Extra rate for Second Floor
142.71
-
5.2
Extra rate for Third Floor
103.17
-
7.8
Cement Concrete 40mm thick cement concrete topping 1:2:4 (Using mechanical mixer for mixing of material). (Under floor tiles) Total Ground Floor + First Floor + Second Floor
462.05
-
167.42
Extra rate for First Floor
114.23
-
2.6
Extra rate for Second Floor
142.71
-
5.2
Extra rate for Third Floor
103.17
-
7.8
Providing and laying water proofing treatment in sunken portion of WCs, bathroom etc., by applying cement slurry mixed with water proofing cement compound consisting of applying : a) First layer of slurry of cement @ 0.488 kg /sqm mixed with water proofing cement compound @ 0.253 kg/sqm. This layer will be allowed to air cure for 4 hours. b) Second layer of slurry of cement @ 0.242 kg/ sqm mixed with water proofing cement compound @ 0.126 kg/ sqm. This layer will be allowed to air cure for 4 hours followed with water curing for 48 hours. The rate includes preparation of surface, treatment and sealing of all joints, corners, junctions of pipes and masonry with polymer mixed slurry.
360.11
-
259.65
Providing and fixing 1st quality ceramic glazed wall tiles conforming to IS : 15622 (thickness to be specified by the manufacture of approved make in all colours, shades except burgundy, bottle green, black of size 250 x 330 300 x 300mm mm as approved by Engineer-in-Charge in skirting, risers of steps and dados over 12 mm thick bed of cement Mortar 1:4 (1 cement: 4 coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm including pointing in white cement mixed with pigment of matching shade complete. Total Ground Floor + First Floor + Second Floor + Third Floor
1556.57
-
733.1
Extra Rate for First Floor
403.16
-
2.66
Extra rate for Second Floor
439.68
-
5.32
Extra rate for Third Floor
354.79
-
7.98
Coloured Granite stone tiles 20mm thick in skirting, risers of steps, dado walls and pillars laid in 12.5mm thick cement mortar 1:3 (1 cement 3 coarse sand) and jointed with neat cement slurry mixed with pigment to match the shade of stone, including rubbing and polishing including labour for fixing dowel pins and cramps. Total Ground Floor + First Floor + Second Floor + Third Floor
511.12
-
4855.93
Extra Rate for First Floor
128.99
-
2.66
Extra rate for Second Floor
157.98
-
5.32
Extra rate for Third Floor
112.53
-
7.98
Sub Head -5 Water Coller Supply & installation of self contained drinking water cooler with (Non CFC Refrigerant) energy efficient compressor of make USHA, Model No. SRA 60 120 G, cooling capacity Ltrs/hr. 60, storage type capacity 120 Ltrs. Including installation etc. Complete in all respect as approved and desired by the Engineer-in-charge at site. Make...USHA/ Voltas – or its equivalent.
4
-
39476
Supply & installation of self contained drinking water cooler with (Non CFC Refrigerant) energy efficient compressor of make USHA, Model No. SRA 40 80 G, cooling capacity Ltrs/hr. 40, storage type capacity 80 Ltrs. including installation etc. Complete in all respect as approved and desired by the Engineer-in-charge at site. Make...USHA / Blue Star / Bajaj – or its equivalent.
2
-
31254
Supply & Erection of automatic voltage stabilizer for storage type water cooler, Wall mounted, Heavy duty, copper wounded with volt meter etc. along with 3 core cord of suitable length and 3 pin power shoe including erection, connection & testing etc. complete in all respect as approved and desired by the Engineer-in-charge at site. Make... V – Guard or its equivalent.
6
-
3007
Supply & installation of RO Ultra Violet Filter and Censor system, capacity 120 ltr. Per hour, 100% chemical free, including installation etc. Complete in all respect as approved and desired by the Engineer-in-charge at site. Make... Aquasure – or its equivalent.
6
-
10408
Sub Head-2
Estate Water Supply Excavation by mechanical means(JCB or Hydraulic excavator) in trenches for pipe lines with straight or open cutting in streets or open area including trimming and dressing sides levelling of beds of trenches to correct grade, cutting joint holes, refilling consolidation,watering , including the cost of dewatering of rain water, diversion for traffic, night signals. providing & fixing caution boards, crossing over trenches for access to the houses, watching, fencing, etc. and removal of surplus soil out side/inside the town involving lead upto 15 meter complete in all respect.Earth work upto 1.5 m. Depth All classes of soil except rocky For 80mm pipe line
125.88
-
57.5
Providing, Stringing out, cutting, Jointing and testing of ISI Marked D.I. Pipe (S&S) as per IS 8329 and laying the same in trenches to correct alignment and gradients, jointed with rubber tyton joints fitted complete including all cartage.
D.I. Pipe as per IS 8329 DI-K9 80mm i/d pipe lines laid complete
190.72
-
889.5
Supplying and laying D.I. specials/fittings as per IS:9523-2000 (ISI marked with the prior approval of Engineer-in-Charge), class K-12 suitable for tyton joint with external bitumen coating and inside cement mortar lining, scaffolding, tools and plants, ropes, guys, etc. Complete in all respects. D.I. specials upto 300mm i/d
174
-
97.5
Providing & fixing C.I/D.I Flanged end, stem of SS (AIS 1410) and Bronze(gunmetal) working parts Sluice Valves ISI marked 14846-2000, including jointing , testing & cost of Nut ,Bolt & insertion sheet, all carriage complete (with the approval of Engineer in-charge).
Class PN-1 as per ISI 80mm i/d Sluice Valves flanged
6
-
4178.5
Construction of masonary Sluice Valve Chamber excluding Sluice valve cover as per standard design & drawings of public health department. Size 0.6 m. x 0.6 m.
6
-
4818
Providing & fixing C.I indicating plates of size 100mm x 100mm for SV/FH including synthetic enammel paint & letters in white enamel paint , fixing in the ground with angle iron of size 25x25x5mm, 230mm height from ground including concrete block complete in all respect as directed by Enginner-in-Charge.
6
-
191
Providing, fixing and jointing Cast Iron surface box for Sluice valve, Air valve, Fire hydrant etc. including all carriages complete.
18
-
67
Sub Work-3
Sub Head-1
Estate Sewerage Providing, lowering, cutting & jointing salt glazed stone ware pipes and specials ISI marked as per IS: 651-2007 class Sp-1 into trenches for all depths and laying out the same to correct alignment, gradients, levels etc., cutting of concrete beds and joints holes, supporting the pipes and specials, in correct position in a suitable rigid manner while the same are being jointed and until the surrounding benching, haunching and envelopes are completed including jointing of pipes and specials in trenches, using cement sand mortar 1:1 and best spun Jute yarn as per IS:1887, finishing and trowelling of each joint at an angle of 45 degree with the longitudinal axes of pipe, watering, keeping the joint covered and wetted till the same are cured, testing the sewerage line for leakage and making all leakages and defects good as laid in the contract specification, chipping and finishing the cut surface to uniform finish to the entire satisfaction of engineer-in-charge Including all cartage etc complete in all respects.100 mm i/d pipes
174
-
185.9
150 mm i/d pipes
156
-
300.3
200mm i/d pipe
210.77
-
370.9
Excavation manually in trenches with straight or open cutting in a built up street/ lanes having wall to wall width upto 3 metre for sewers and manholes to full depths as shown in drawings, including shoring, dressing to correct sections and dewatering of rain water, provision for diversion for traffic, protection of existing services i.e. telephone cables ,electric lines, water supply lines and gas lines etc. night signals, profiles, pegs, sight rails, boning rods, fixing and maintenance of caution boards, fencing, refilling trenches, watering, dressing and restoration of surface to original level and removal of surplus spoils from the site of works upto 15 metre, for all works other than connections to complete in all respects.For depths not exceeding 2.0 metre B.G.L.
For all classes of soil except rocky For Sewer Line 150 mm dia as per Detail attached
497.31
-
111.67
Cement concrete 1:6:12 with brick ballast 40mm gauge using concrete mixer.
56.81
-
2470.11
Constructing brick masonry manhole in cement mortar 1:5 ( 1 cement : 5 coarse sand ) R.C.C. top slab 20cm thick using M-20 mix by using mixer and vibrator, TMT Fe500 @ 63.464 kg/per cum, foundation concrete 1:4:8 mix (1 cement: 4 coarse sand : 8 graded stone aggregate 40mm nominal size) inside plastering 12mm thick with cement mortar 1:3 (1 cement: 3 coarse sand) finished with floating coat of neat cement and making 40mm thick benching in cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20mm nominal size) finished with a floating coat of neat cement, Orange coloured PVC steps including RCC cover with frame complete as per standard design complete in all respects. Inside size75x120cm and 120 cm deep
19
-
12175.4
Extra for making connections of all sizes newly laid sewers within benching of fully charged sewers including pluging of sewer, dewatering & desilting of manholes etc. complete in all respects.
1
-
1028.4
Sub Work-5
Fire Fighting Arrangements Providing, laying, fixing, testing and commissioning of 'C' Class heavy duty MS Pipe conforming to Indian Standard IS : 1239/3589 including fittings like tees, bends, sockets, elbows, flanges, tapers, nuts bolts, gaskets etc. in ground with anti corrosive treatment with wrapping coating tape (4mm pypkote tape) as per IS : 10221 including cost of primer etc. excluding cost of excavation and refilling complete in all resepcts. 100mm internal diameter
100
-
1504
150mm internal diameter
150
-
2186
200mm internal diameter
50
-
3145
SITC of MS Pipe
Providing, laying, fixing, testing and commissioning of 'C' Class heavy duty MS Pipe conforming to Indian Standard IS : 1239/3589 including fittings like tees, bends, sockets, elbows, flanges, tapers, nuts bolts, gaskets etc. fixing the pipe on the wall / ceiling with suitable clamps and painting with two or more coats of synthetic enamel paint of required shade complete in all respects. 25mm internal diameter
750
-
272.5
40mm internal diameter
125
-
407.5
50mm internal diameter
50
-
601
65mm internal diameter
125
-
749
80mm internal diameter
150
-
909.5
100mm internal diameter
100
-
1325.5
150mm internal diameter
300
-
1928
200mm internal diameter
75
-
2825.5
SITC of Butterfly valve
Supplying, Laying, Testing and Commissioning of ISI marked BUTTERFLY VALVE PN 1.6, with Gun metal seal duly ISI marked complete with rubber insertion, nuts, bolts and washers, matching flanges of required thickness, etc. complete as per specifications. 100 mm i/d
20
-
6585.5
Providing and fixing fire brigade inlet connection of cast iron body with Gun metal 63mm dia instantaneous type male coupling with built in check valves and 150mm dia flanged outlet complete with bolts, nuts and rubber insertions as per IS:904. (to be connected to static tank). Two Way inlet connection
2
-
6157
Providing and fixing in position automatic brass ball valves in tanks.
25mm i/d Brass ball valve with plastic ball with G.I. socket
2
-
883.5
55mm i/d Brass ball valve with plastic ball with G.I. socket
2
-
2808
Supplying, Installation, Testing and Commissioning of RRL FIRE hose Type A, IS:636, 63mm dia x 15m long with gunmetal male & female couplings (ISI marked) bound & riveted to hose pipes with copper rivets and copper wire as required.
6
-
4453.5
Supplying, Installation, Testing and Commissioning of First Aid-fire Hose reel with MS construction spray painted in post office red, confirming to IS 884 with upto date amendments, complete with rubber hose pipe (IS:444/1987) 20mm dia 30 meter long type-2, hose reel Drum with bracket as per IS:884, 20mm dia GM nozzle and 20mm dia GM gate valve as required complete with G.I pipe connention with main pipe complete in all respect.
6
-
8846
Supplying, Installation, Testing and Commissioning of weather proof cabinet for hose fabricated out of 1.6mm thickness M.S. sheet with front glass door having locking arrangement, suitable to accommodate all the necessary pipes, accessories, fittings etc including painting the metal portion with one coat of ready mixed primer paint and two coats of synthetic enamel paint of approved shade and quality, sign writing etc. 900 mm wide x 600 mm high x 500 mm deep Size (for Yard Hydrant)
3
-
5135
600 mm wide x 600 mm high x 300 mm deep Size - (for RRL Reel)
3
-
4011.5
Providing & fixing C.I/D.I Flanged end, stem of SS (AIS 1410) and Bronze(gunmetal) working parts Sluice Valves ISI marked 14846-2000, including jointing , testing & cost of Nut ,Bolt & insertion sheet, all carriage complete (with the approval of Engineer in-charge).
Special quality Sluice Valve (PN 1.0/PN 1.6) of premium range such as make kirlosker as approved by Engineer-in-Charge. 150mm i/d Sluice Valves flanged
2
-
25253
200mm i/d Sluice Valves flanged
2
-
44064
Supplying, Installation, Testing and Commissioning of G.M Single headed hydrant valve with instantaneous Gun metal peet coupling of 63 mm dia with cast iron wheel ISI marked conforming to IS 5290 (TypeA) with blank Gunmetal Cap and chain including orifice plate made of 6mm th Stainless steel to keep the pressure not more than 3.5 per sqcm at any point complete in all respects.
6
-
6394
Supplying, Installation, Testing and Commissioning 63 mm dia gun-metal Branch Pipe (ISI marked) with 20mm (nominal internal dia) size Gun metal nozzle confirming to IS 903, suitable for instantaneous connection to interconnect hose pipe coupling as required.
6
-
1929.5
Construction of masonary Sluice Valve Chamber excluding Sluice valve cover as per standard design & drawings of public health department. Size 0.9 m. x 0.9 m.
2
-
6716
Providing, fixing and jointing Cast Iron surface box for Sluice valve, Air valve, Fire hydrant etc. including all carriages complete.
30
-
67
Supplying an Fixing Pendant / Upright type sprinkler with quartzoid bulb, operating temperature 68 / 79 degree centigrade of 15 mm dia orifice sprinler head to approved by UL/SN
175
-
217
Supplying and Fixing Sidewall Sprinkler rated at 68 / 79degree centigrade, quartzoid bulb type, 15 mm dia orifice sprinler head to approved by UL/SN complete in all respect.
175
-
252
Providing and fixing of FIRE EXTINGUISHER CO2 type as per IS:15683 complete with all accessories as per manufactures sepcification. ISI Mark Complete in all respect.
4.5kg capacity
10
-
6735.5
Providing and fixing of FIRE EXTINGUISHER ABC powder type (Stored pressure) as per IS:15683 complete with all accessories as per manufactures sepcification. ISI Mark Complete in all respect.
6kg Capacity
10
-
2742
Supplying & fixing air vessel made out of 250mm. Dia, 8 mm thick MS sheet, 1200mm height with air release valves on top and flanged connection to risers, drain arrangements with 25 mm dia gunmetal wheel valves, with required accessories, pressure gauge and painting with synthetic enamel paint of approved shade as required
1
-
15712.5
Providing and fixing of Pressure switch of approved make in MS pipe line suitable for line presure up 15kg/cm2 & including connection with main panel etc. as required complete in all restect
2
-
3376
Providing & Installation Testing and Commissioning of 25mm dia 1200mm long flexible pipe having UL Approval for 25kg/Cm2 complete with socket reducer etc. as required.
20
-
1550
Supplying and Installation control valve C/W water motor gong complete with alarm Valve, constant trim, water motor bell, 2No. Pressure Gauge. All parts UL listed. Make Newage complete in all respect. 100 mm control valve
2
-
27700.5
Sub Work-6
Roof Top Rain water Harvesting
Providing, Laying , fixing & jointing of P.V.C. Pipes as per ISI-4985 (ISI marked with the prior approval of Engineer-in-Charge) along the Trenches and laying the same in Trenches to correct alignment and gradients, cutting, jointing and testing complete as per specifications.
200mm o/d pipe of 4 Kgf. / sqcm
428.17
-
640
160mm o/d pipe of 4 Kgf. / sqcm
642
-
399.5
Excavation in trenches with straight or open cutting in streets, lanes or in open area with 3D/JCB or excavator including manually dressing bed, trimming sides and side slopes for sewers and manholes to full depths as shown in drawings,including, dressing to correct sections and dewatering, provision for diversion for traffic, protection of existing services i.e. telephone cables, electric lines, water supply lines and gas lines etc. night signals, profiles, pegs, sight rails, boning rods, watching, etc., fixing and maintenance of caution boards, fencing, refilling trenches, watering, ramming and restoration of surface to original level and removal of surplus spoil from the site of works, upto one chain (15m) complete in all respects. For depths not exceeding 2.0 metre B.G.L.
For all classes of soil except rocky
1248.24
-
65.55
Construction of Haudi internal size 0.90mtr x 0.90mtr & 0.90mtr depth in Brick masonary 1:5, bed 40mm thick cement concrete 1:2:4, 150mm thick base lean concrete 1:8:16, RCC Slab cover 75mm thick inside plaster, cement rendering & RCC man hole cover 450x600 mm clear inside opening rectangular RCC Manhole cover with frame Light Duty complete as per Drawing attached & as desired by the Engineer-in-charge Haudi Inside size 90x 90 cm and90 cm deep
43
-
7333
Construction of Haudi internal size 0.45mtr x 0.45mtr & 0.45mtr depth in Brick masonary 1:5, bed 40mm thick cement concrete 1:2:4, 150mm thick base lean concrete 1:8:16, RCC Slab cover 75mm thick inside plaster, cement rendering & RCC man hole cover 450x450 mm clear inside opening rectangular RCC Manhole cover with frame Light Duty complete as per Drawing attached & as desired by the Engineer-in-charge No. of Haudi @ 5mtr. C/c Distance of Rain water Pipe line
107
-
2820
Construction of Rain water recharge well 3.00mtr dia with working depth 3.50mtr dia consisting of drilling bore 300mm dia 100mtr, supplying and lowering pvc perforated housing pipe 200 mm dia 10kgf/sqcm 50mtr sorrunded with filtermedia , galvanised stainer CI pipe Class LA 150mm i/d 4mtr duly plugged from top with bail plug, fixing MS clamp, MS socket, Well size 3.00 mtr internal dia, 5.10 mtr deep constructed with BB in 1:5 cement sand mortar,plastered from inside, RCC slab, filtered media in 3 Layers, 2Nos RCC Man hole cover conneted with collecting chamber size 1mtr x 1mtr x 1.20 mtr deep providing and fixing MS grating and all other relevent material required as per site complete in all respect as per drawing attached and entire satisfaction of the Engineer-in-charge . (Note :- Payment will be made as per CSR Based Rates Plus/Minus Quoted rates).
1
-
330637
Construction of Rain water recharge well 3.00mtr dia with working depth 3.50mtr dia consisting of drilling bore 300mm dia 100mtr, supplying and lowering pvc perforated housing pipe 200 mm dia 10kgf/sqcm 50mtr sorrunded with filtermedia , galvanised stainer CI pipe Class LA 150mm i/d 4mtr duly plugged from top with bail plug, fixing MS clamp, MS socket, Well size 3.00 mtr internal dia, 8.1 mtr deep constructed with BB in 1:5 cement sand mortar,plastered from inside, RCC slab, filtered media in 3 Layers, 2Nos RCC Man hole cover conneted with collecting chamber size 1mtr x 1mtr x 1.20 mtr deep providing and fixing MS grating and all other relevent material required as per site complete in all respect as per drawing attached and entire satisfaction of the Engineer-in-charge . (Note :- Payment will be made as per CSR Based Rates Plus/Minus Quoted rates).
1
-
385616
Providing Internal Electrical Installations RECESSED PVC CONDUIT PIPE WIRING SYSTEM WITH MODULAR SWITCHES:
Wiring in PVC insulated copper conductor single core FR cable (ISI marked), 1100volts grade to be laid in heavy gauge, PVC, fire retardant conduit pipe 20mm/25mm dia. ISI Marked, recessed in wall etc., complete with powder coated/anodized concealed metal boxes required for suitable number of modules, for having electronic fan regulators, bell push, electronic buzzer, 3pin 6Amp., 3pin 16/20Amp. Sockets and 6Amp./16/20Amp. Switches (Screw Type Modular Accessories) etc., and covered with Frame Plate etc., & including the cost of required number of modular switches/sockets, step type electronic fan regulator 100watts, PVC connector (For Fan Box and Electronic Buzzer), Steel Hooks, Circular Inspection Box (Recessed Type and Deep Type) PVC conduit pipe & copper wire and other petty material etc. including the cost of cutting and filling up of chases:-
Make :- PVC conduit pipe:-AKG / Diplast / Canon / PolyInida / PolyCab PVC Insulated copper wire:-Finolex/ Havells/ RR Kable
Accessories:-Northwest/Legrand (Myrus Series)/ SSK (NV Series) / Havells (Crab tree) / Hager (Insysta)
Wiring fan point with sheet metal fan box (shape hexagonal) in PVC insulated copper conductor single core FR cable (ISI marked) overall 1.5 sq. mm, 1100volts grade with step type electronic fan regulator 100watts.
304
-
982.59
Wiring light point in PVC insulated copper conductor single core FR cable (ISI marked) overall 1.5 sq. mm, 1100volts grade.
725
-
508.92
Wiring call-bell point in PVC insulated copper conductor single core FR cable (ISI marked) overall 1.5 sq. mm, 1100volts grade with bell push and electronic buzzer 230 volts AC (including the cost of bell push, electronic buzzer & powder coated concealed metal box for electronic buzzer).
36
-
590.61
Wiring 3 pin 6 Amp. wall socket (Shuttered) point in PVC insulated copper conductor single core FR cable (ISI marked) overall 1.5 sq. mm, 1100volts grade complete with bonding to existing earth with PVC insulated copper conductor single core FR cable (ISI marked) overall 1 sq. mm, 1100volts grade.
75
-
501.66
Wiring 3 Pin 6 Amp. Plug control comprising wall socket (shuttered) and switch including bonding to existing earth with PVC insulated copper conductor single core FR cable (ISI marked) overall 1 sq. mm, 1100volts grade complete.
261
-
340.28
Wiring 3 pin 16/20 amp. power plug control (shuttered) and switch.
225
-
399.97
Wiring light point in PVC insulated copper conductor single core FR cable (ISI marked) overall 1.5 sq. mm, 1100volts grade complete with double control switches.
8
-
788.25
Wiring TV sockets and Telephone socket points in powder coated/anodized concealed metal boxes recessed in wall required for suitable number of modules, for having TV sockets, Telephone sockets RJ11 & RJ45 (one module) etc., and covered with Frame Plate etc., & including the cost of required number of modular TV sockets, Telephone sockets RJ11 & RJ45 (one module) and other petty material etc. including the cost of cutting and filling up of chases:- Wiring Telephone socket point RJ11 (one module)
35
-
231.75
PVC, HDPE PIPES & PVC FLEXIBLE PIPES:
Supply & erection of PVC pipes & HDPE pipes (fire retardant) for wiring purposes including bends, inspection boxes etc., where necessary including other petty material as per PWD General Specifications 2010:-
Make:- Diplast/ Canon/ AKG/ Poly India/ Polycab/ Ravindra Heavy gauge PVC conduit pipe 20mm dia. (ISI marked) Flushed
2750
-
33.9
Heavy gauge PVC conduit pipe 25mm dia. (ISI marked) Flushed
700
-
40.9
Heavy gauge PVC conduit pipe 40mm dia. (ISI marked) Flushed
200
-
77.47
Heavy gauge PVC conduit pipe 50mm dia. (ISI marked) Flushed
200
-
103.49
PVC flexible pipe 40mm dia.
100
-
75.13
HEAVY GUAGE WELDED CONDUIT PIPES: Supply and erection of 20mm dia. heavy gauge welded conduit pipe (1.60mm thick) suspension rod for ceiling fan complete in all respect as desired by the Engineer-in-charge.
304
-
85.03
PVC INSULATED SINGLE CORE FRCOPPER CONDUCTOR CABLE: Supply and erection of PVC insulated single core FRcopper conductor cable ISI marked left bare in pipe or casing of suitable size excluding the cost of supply and erection of pipe or casing. Make:-Finolex,, / RR Kabel/ Havell's PVC insulated copper conductor single core FRcable (ISI marked) overall 1.5 sq.mm, 1100volts grade
3850
-
15.11
PVC insulated copper conductor single core FRcable (ISI marked) overall 2.5 sq.mm, 1100volts grade
6500
-
21.61
PVC insulated copper conductor single core FRcable (ISI marked) overall 4 sq.mm, 1100volts grade
1200
-
29.97
PVC insulated copper conductor single core FRcable (ISI marked) overall 10 sq.mm, 1100volts grade
1200
-
73.27
PVC insulated copper conductor single core FRcable (ISI marked) overall 25 sq.mm, 1100volts grade
1200
-
181.08
COPPER EARTHING:
Earthing of Sheet metal/ iron clad switches and metallic cases etc., with 20 mm x 3 mm thick electrolytic copper tape rivetted (with 10 nos. copper rivets) to 30 cm x 120 cm x 3 mm thick tinned copper plate (made cylindrical) burried 10 metre below ground level in the hole of excavation having bore dia. 125mm and surrounded by salt & charcoal dust mixture (20 kg.) including fixing the copper tape on wall and in floor etc., up to 13 metre in length (including bore length). G.I. pipe 20mm dia. (A-class) should be laid in the hole of excavation from bore surface level to 1 feet below ground level and having wire mesh funnel fixed on the top level of the pipe. 300mm x 300mm x 300mm deep haudi of bricks finished with 1:4 cement plaster and haudi covered with cast iron lid having size 300mm x 300mm around the hole of excavation.
10
-
14481.34
COPPER EARTHING:
Earthing of Sheet metal/ iron clad switches and metallic cases etc., with 40 mm x 5 mm thick electrolytic copper tape rivetted (with 10 nos. copper rivets) to 30 cm x 120 cm x 3 mm thick tinned copper plate (made cylindrical) burried 10 metre below ground level in the hole of excavation having bore dia. 125mm and surrounded by salt & charcoal dust mixture (20 kg.) including fixing the copper tape on wall and in floor etc., up to 13 metre in length (including bore length). G.I. pipe 20mm dia. (A-class) should be laid in the hole of excavation from bore surface level to 1 feet below ground level and having wire mesh funnel fixed on the top level of the pipe. 300mm x 300mm x 300mm deep haudi of bricks finished with 1:4 cement plaster and haudi covered with cast iron lid having size 300mm x 300mm around the hole of excavation.
5
-
22235.56
COPPER EARTHING:
Supply and Erection of 20mm x 3mm thick copper tape (As additional length).
110
-
343.54
COPPER EARTHING:
Supply and Erection of 40mm x 5mm thick copper tape (As additional length).
20
-
1076.26
SHEET METAL DOUBLE DOOR DISTRIBUTION BOARD FOR MCB/ RCBO/ RCCB's:
Supply and erection of sheet metal double door distribution boards of suitable size and of required no. of ways for mounting miniature circuit breakers/ RCBO's/ RCCB's in the existing MCB distribution board as per PWD General Specifications 2010 including connections with suitable size of thimbles and bonding to existing earth etc.GROUP-A: (Siemens (Beta Guard/Minigard), Legrand (Ekinoxe) & Schneider (Neo Break), L&T (EXORA), HAGER Sheet metal double door T.P. & N. distribution board (dust protected) provided with bus bar, neutral link and din bar, suitable for incorporating FP/ TPN MCB's/ isolators for incoming and DP/ SP & N/ Single Pole MCB's/ RCBO/ RCCB's for outgoing 4 way each
13
-
2529.26
Sheet metal double door T.P. & N. distribution board (dust protected) provided with bus bar, neutral link and din bar, suitable for incorporating FP/ TPN MCB's/ isolators for incoming and DP/ SP & N/ Single Pole MCB's/ RCBO/ RCCB's for outgoing 6 way each
13
-
3065.35
Sheet metal double door T.P. & N. distribution board (dust protected) provided with bus bar, neutral link and din bar, suitable for incorporating FP/ TPN MCB's/ isolators for incoming and DP/ SP & N/ Single Pole MCB's/ RCBO/ RCCB's for outgoing 8 way each
12
-
3667.9
MINIATURE CIRCUIT BREAKERS/ RCBO's/ RCCB's:
Supply and erection of Miniature Circuit Breakers/ RCBO's/ RCCB's in the existing MCB distribution board as per PWD General Specifications 2010 including connections with suitable size of thimbles/lugs. GROUP-A: (Siemens (Beta Guard), Legrand (Lexic) & Schneider (Neo Break), L&T (Exora) ,Hager
Miniature circuit breaker single pole 6 to 32amp. (Breaking capacity 10kA, Curve-C) suitable for 240/ 415 volts 50cycles AC supply
660
-
173.26
Miniature circuit breaker four pole 40amp. (Breaking capacity 10kA, Curve-C) suitable for 240/ 415 volts 50cycles AC supply
12
-
1468.88
Miniature circuit breaker four pole 50/63amp. (Breaking capacity 10kA, Curve-C) suitable for 240/ 415 volts 50cycles AC supply
30
-
1624.33
DOUBLE WALLED CORRUGATED (DWC) HDPE PIPES:
Supply and erection of double walled corrugated (DWC) HDPE pipe to be laid 1mtr. below ground level including excavation (making necessary trench), placing the pipe in position and back filling with excavated soil etc. of the required size.
Make :-Duraline/ EMtel / REX Double walled corrugated (DWC) HDPE pipe 160/136 mm (outer/ inner dia.)
90
-
234.13
XLPE/ PVC INSULATED ARMOURED CABLES (UNDERGROUND):
Supply & laying of aluminium conductor XLPE/ P.V.C. insulated PVC sheathed armoured and served cable to be laid 1 m below ground level including excavation, sand cushioning, covering with sand & bricks and back filling the trench etc., of the required size as per PWD General Specifications (Electrical Works):-
Make :- Finolex, Havells, RR Kable Aluminium conductor XLPE/ PVC insulated PVC sheathed armoured and served cable working voltage 1100volts grade 35sq.mm (3 ½ Core)
50
-
316.71
Aluminium conductor XLPE/ PVC insulated PVC sheathed armoured and served cable working voltage 1100volts grade 50sq.mm (3 ½ Core)
50
-
384.79
Aluminium conductor XLPE/ PVC insulated PVC sheathed armoured and served cable working voltage 1100volts grade 185sq.mm (3 ½ Core)
266
-
954.27
Aluminium conductor XLPE/ PVC insulated PVC sheathed armoured and served cable working voltage 1100volts grade 300sq.mm (3 ½ Core)
325
-
1417
CABLE TRAY: Supply and erection of MS perforated cable tray with DA gray paint on the existing surface with the help of MS angle iron support (to be painted with approved paint) of size 50mm x 50mm x 6mm thick to be fixed with fastners/ nut & bolts etc. complete in all respect as desired by the Engineer-in-charge as per PWD General Specifications (Electrical Works). MS perforated cable tray size 150mm x 50mm x 50mm (2mm thick)
100
-
595.47
SUPPLY AND ERECTION OF WIRING ACCESSORIES:Supply and erection of switches, sockets, power switch and sockets and other accessories (flush piano type/ modular accessories) in the existing bakelite/ modular cover frame including connections and petty material etc.Bakelite batten holder large size
13
-
27.86
Supply and erection of High quality aluminium extruded with decorative end caps glazed LED batten of Make Jaquar Item Code LGLZ01x020XC or Its equilant Make and Cat. of Philips / Crompton including erection of the same with connections, testing etc.complete in all respects as approved and desired by the Engineer in-charge at site.
321
-
539
Supply and erection of Glazed LED Batten Hgh Qualty Aluminum Extruded wth decorative end caps of Make Jaquar Item Code LGLZ01x040XC or Its equilant Make and Cat. of Philips / Crompton including erection of the same with connections, testing etc.complete in all respects as approved and desired by the Engineer in-charge at site.
6
-
2007
S/E of Energy Saving Fan Ceiling Fans 1200mm sweep ( 48" ) having two ball bearing but without regulator including flexible wire & petty material etc. for connections complete with erection, connections and testing etc. complete in all respect as approved and desired by the Engineer-in-charge at site. Make :- Crompton Entrust 50-5Star or its equillant make Havell's ES-50 Premium 5Star /Orient.
304
-
1848
Supply and erection of 12" Heavy Duty Exhaust fan (HDEF) (300mm-900RPM) Single Phase of make Crompton Model EXHD 300-6-1 or Its equialant Make Havell's Turbo Force SP / GE ISI marked heavy duty motor with die cast Aluminium rotor mounted on two ball bearing including erection, connections and testing etc. complete with flexible wire and petty material reqd. for connections and louver shutter complete in all respects as appd. and desired by the Engineer in-charge at site
65
-
3039
Supply and erection of Plastic Ventialtion Fan Ventilus 10" (250mm-900RPM) Single Phase of make Crompton , White Colour / Havell's Ventil Air-DX White /Orient including erection, connections and testing etc. complete with flexible wire and petty material reqd. for connections and louver shutter complete in all respects as appd. and desired by the Engineer in-charge at site
14
-
1496
Supply and erection of Wall fan of 400mm sweep (16") High Speed. Make Crompton Wind flo Hi-Speed or Its equilant make Havell's / Orient ISI marked heavy duty motor with die cast Aluminium rotor mounted on two ball bearing including erection, connections and testing etc. complete with flexible wire and petty material reqd. for connections and Aluminium louver shutter complete in all respects as appd. and desired by the Engineer in-charge at site.
6
-
2401
Supply and Erection of Recess mounted white powder coated CRCA housing wth full window acrylic diffuser LED Panel 2'x2' 36w of Make Jaquar Item Code LULTO IS 036XC or its equilant make Phillips / Crompton including cutting of ceiling , erection, connections and testing etc. of the same with petty material as required at site complete in all respects as approved and desired by the Engineer in charge at site.
229
-
2725
Supply and Erection of Neve Plus (Square) LED recess mounte square pannel with aluminium die cast housing of make Jaquar item code LNEPO1SO12XC or its equilivalent make and cat of Philips / Crompton with cut out dimensions of 154mm x 154mm incuding cutting of ceiling, erection, connections and testing etc of the same on wall with petty material as required at site complete in all respects as approved & desired by the Engineer-in-Charge.
30
-
838
Supply and Erection of Neve Plus (Square) LED recess mounte square pannel with aluminium die cast housing of make Jaquar item code LNEPO1SO6XC or its equilivalent make and cat of Philips / Crompton with cut out dimensions of 107mm x 107mm incuding cutting of ceiling, erection, connections and testing etc of the same on wall with petty material as required at site complete in all respects as approved & desired by the Engineer-in-Charge.
30
-
632
Supply and Erection of Neve Plus (Square) LED recess mounte square pannel with aluminium die cast housing of make Jaquar item code LNEPO1SO24XC or its equilivalent make and cat of Philips / Crompton with cut out dimensions of 206mm x 206mm incuding cutting of ceiling, erection, connections and testing etc of the same on wall with petty material as required at site complete in all respects as approved & desired by the Engineer-in-Charge.
52
-
1568
Supply and Erection of Neve Surface (Round) LED surface mounted Round pannel with aluminium die cast housing of make Jaquar item code LNVE02R018SC or its equilivalent make and cat of Philips / Crompton with cut out dimensions of dia 220mm x Height 54mm incuding cutting of ceiling, erection, connections and testing etc of the same on wall with petty material as required at site complete in all respects as approved & desired by the Engineer-in-Charge.
20
-
1379
Supply and Erection of Neve Plus (Square) LED recess mounte square pannel with aluminium die cast housing of make Jaquar item code LNEPO1RO24XC or its equilivalent make and cat of Philips / Crompton with cut out dimensions of 275mm height 20mm incuding cutting of ceiling, erection, connections and testing etc of the same on wall with petty material as required at site complete in all respects as approved & desired by the Engineer-in-Charge.
52
-
1568
Supply and erection of LED flood light 30w with high pressure die cast housing (IP 65 Protected) of Make Jaquar item code LFLD02SO 30XC or its equivallent make & Cat Phillips / Crompton. The fitting will be mounting with the help of necessary arrangement for installation in Shooting Hall including connections, testing & commissioning etc. complete in all respects as per satisfaction and desired by the Engineer-in-charge at site.
35
-
3144
Supply and Erection of AC Terminal (Modular Series) Including 1 No. 6 Pin 25A Shuttered Socket and 1 No. Single Phase motor startor 25A. In concealed metal box of guage 18swg of size 79mm x 135mm x52mm deep with mounting cover frame 4 modules steel plate 5"x3" (As per CAT No. 35311WH) including connections and complete in all respects as desired by the Engineer in Charge at site. Make Anchor Roma / North- West/ Legrand/Hager (Insysta)/ Hager
49
-
901
Supply, Erection, Testing & commissioning of indoor floor LT panel (Modular construction bolted type) of suitable size having minimum depth 300mm / wide 300mm for busbar at the front of the panel. Panel shell be made from 14 / 16SWG CRCA sheet, conforming to IS 8623/1977-82 IEC 60439. The Panel shall be suitable for operation at 415+6% Volts, 50HZ, 3 phase wire & earth system, the panel will be free standing floor mounting type having provision for cable entry from bottom/top with cable glands etc. The panel will be fabricated using CRCA sheet structure with totally enclosed enclosure (Each compartment of switch is totally enclosed from each side). The sheet metal is sprayed with corrosion resistant etch Primer. The finishing treatment shall be applicable with air drying paint (8 tank prosess Powder coated) after necessary putty work the panel will be provided with doors having hinges and half turn locks only. The panel shall be provided with TPN Busbar of suitable size according to the size of MCCB's. Busbar shall be of high conductivity AluminiumAll Busbar will be air insulated with codified in Red, Yellow, Blue & Black as per standard for cable termination with the help of extended busbar only (electric grade with Tin coating). The panel shall complete with also have digital metering unit with selector switch (volt meter & ammeter) epoxy insulator, gasket, PVC sleeves, CT's & led type indicator, cable termination & cable glands, nuts & bolts & other patty material etc. Detail of material to be installed in the cubical panel with the following switch gears. Manufacturer of Panel should be CPRI Approved(Approval not older then 5 years) & ISO certified (Manufacturer workshop as per ISO standerd) The Concerened contactor shall be approved the detailed drawing of panel with complete specification from the Engineer in charge at site of size (2000mm (w) x 1225mm (H) x 300mm (D)) as per site requirement Panel Manufacturer Make:- ETE Electrogears /Kalyani Switch Gear / CMKL
Incomers:-
■100Amp.415volts ≥25 FP MCCB Unit with Fixed Type Thermal and Magnetic Protection =1Nos.
■40-80Amp.415volts ≥50 FP MCCB Unit with Fixed Type Thermal and Magnetic Protection =1Nos.
MCCB Fixed type Make :- L&T Du/DH), ABB (T-MAX),( Schneider CVS), Hager Outgoing :- MCB 50/63amp 4P for Power Load = 5 Nos MCB 40amp 4P for Light Load = 5 Nos ■ All Incomers & Out going With Extendable Rotary Handle with adjustabledepth
4
-
99309
Supply, Erection, Testing & commissioning of indoor Main LT cubical panel (Modular construction bolted type) of suitable size having minimum depth 400mm / wide 300mm for busbar at the front of the panel. Panel shell be made from 14 / 16SWG CRCA sheet, conforming to IS 8623/1977-82 IEC 60439. The Panel shall be suitable for operation at 415+6% Volts, 50HZ, 3 phase wire & earth system, the panel will be free standing floor mounting type having provision for cable entry from bottom/top with cable glands etc. The panel will be fabricated using CRCA sheet structure with totally enclosed enclosure (Each compartment of switch is totally enclosed from each side). The sheet metal is sprayed with corrosion resistant etch Primer. The finishing treatment shall be applicable with air drying paint (8 tank prosess Powder coated) after necessary putty work the panel will be provided with doors having hinges and half turn locks only. The panel shall be provided with TPN Busbar of suitable size according to the size of MCCB's. Busbar shall be of high conductivity AluminiumAll Busbar will be air insulated with codified in Red, Yellow, Blue & Black as per standard for cable termination with the help of extended busbar only (electric grade with Tin coating). The panel shall complete with also have digital metering unit with selector switch (volt meter & ammeter) epoxy insulator, gasket, PVC sleeves, CT's & led type indicator, cable termination & cable glands, nuts & bolts & other patty material etc. Detail of material to be installed in the cubical panel with the following switch gears. Manufacturer of Panel should be CPRI Approved(Approval not older then 5 years) & ISO certified (Manufacturer workshop as per ISO standerd) The Concerened contactor shall be approved the detailed drawing of panel with complete specification from the Engineer in charge at site.(L3150XH1675XD400.Aprrox)Panel Manufacturer Make:-ETE Electrogears./Kalyani Switch Gear / CMKL
Incomers:-
■630Amp.415volts ≥50 FP MCCB Unit with electronic trip units (microprocessor based) = 3Nos.
(MCCB (Microprocessor Based Adjustable Thermal and Magnetic Protection Make: L&T (DSINE), ABB (T-MAX), Schneider (NSX), Seimens(3VL),Hager):
■ (Make: L&T-U Power, ABB-E Max, Seimens-3WL, Schneider-MVS,Hager )
Outgoings:-
■ On load change over switch 4P 400amp 415v = 1 Nos for Power Load
■ On load change over switch 4P 250amp 415v = 1 Nos for Light Load
■250Amp.415volts ≥50 FP MCCB Unit with electronic trip units (microprocessor based) = 1Nos for capacitor panel.
(MCCB (Microprocessor Based Adjustable Thermal and Magnetic Protection Make: L&T (DSINE), ABB (T-MAX), Schneider (NSX), Seimens(3VL),Hager):
■100Amp.415volts ≥35 FP MCCB Unit with electronic trip units (microprocessor based) =4Nos.. for power load
■40-80Amp.415volts ≥35 FP MCCB Unit with electronic trip units (microprocessor based) =9Nos.. ■ (MCCB Microprocessor Based Make: L&T (DSINE),, Schneider (NSX), Seimens(3VL))Hager: ■ All Incomers & Out going With Extendable Rotary Handle with adjustabledepth complete as per schematic diagram attached / analysis & Satisfaction of the Engineer in charge at site:
1
-
372516
Lightining Conductor :-
Supply and erection of 25mm dia. 0.91meter long tapered in to a point at the top (G.I. rod).
8
-
500
Lightining Conductor :-
Supply and erection of G.I. 7/10S.W.G. (10mm dia) stranded flexible lighting conductor wire including supply of suitable iron clamps.
600
-
40
Lightining Conductor :-
Providing Stranded watering tank (30cm x 30cm x 30cm) complete with 3mm thick galvanised iron plate cover provided with chain & locking arrangment .
8
-
500
Lightining Conductor :-
Supply and erection of earth electrode of 20mm dia., 2.75metre long G.I. pipe from ground level, connecting the 50mm dia., 1.37 metre long perforated G.I. pipe.
8
-
700
Providing Campus Lighting and Security Lighting
Campus Lighting 3-STEPPED STEEL TUBULAR POLE:
Supply and erection of 3-Stepped steel tubular swaged and welded pole of suitable length conforming to I.S. 2713-1969 (Part I to III) / 1980 and I.S. 1161-1979 (UTS 42 kgf/mm sq.) to fixed up to a required planting depth below ground level in a hole of excavation about 45 cm dia. and suitable depth to filled in up to 15 cm below G/L with 1:2:4 cement concrete mixture and having 1:2:4 cement concrete muff of dia. 450mm, 80cm long above ground level sufficient to completely flush a MCB distribution board SPN 4way (double door) with hinged water tight cover with locking arrangement having one single pole MCB of required capacity fixed on din bar. The outer surface of the plinth to be finished with pure cement including painting of pole with two coats of approved aluminium paint as required:-Overall length 7 metre, with planting depth 1.25 metre, length of sections 4 metre,1.5 metre and 1.5 metre (Bottom, Middle and Top respectively), Outer dia and thickness of sections 114.3mm x 4.50mm, 88.9mm x 4.05mm and 76.1mm x 3.25mm (Bottom, Middle and Top respectively) with approximate weight 73 kg.
10
-
9070.4
Supply & Erection of LED Street Light 45w in aluminium pressure Die Cast housing with touched glass cover (IP 66 protection ) of Make Jaquar Item Code LSR T 0IS0 45xC or its equilant make and Cat Philips / Crompton including erection of the same with the existing bracket fixed with pole, connections and testing etc. complete in all respects as aproved by the Engineer in charge at site.
12
-
3805
XLPE/ PVC INSULATED ARMOURED CABLES (LOOSE):
Supply & laying of aluminium conductor XLPE/ P.V.C. insulated armoured and served cable to be laid loose in the existing trench or pipe as per PWD General Specifications (Electrical Works):-
Make :-Havell's/ RRKable/ Finolex Aluminium conductor XLPE/ PVC insulated PVC sheathed armoured and served cable working voltage 1100volts grade 16sq.mm (Twin Core)
350
-
110.86
DOUBLE WALLED CORRUGATED (DWC) HDPE PIPES: Supply and erection of double walled corrugated (DWC) HDPE pipe to be laid 1mtr. below ground level including excavation (making necessary trench), placing the pipe in position and back filling with excavated soil etc. of the required size. Make :- REX/ Duraline / Amtel
Double walled corrugated (DWC) HDPE pipe50/38mm (outer/ inner dia.)
325
-
86.01
COPPER EARTHING:
Earthing of Sheet metal/ iron clad switches and metallic cases etc., with 8 SWG (4mm dia.) electrolytic copper wire thimbled (with 1 nos. copper thimble) to 30 cm x 60 cm x 3 mm thick tinned copper plate (made cylindrical) burried 10 metre below ground level in the hole of excavation having bore dia. 125mm and surrounded by salt & charcoal dust mixture (20 kg.) including fixing the copper wire run through 20mm dia. G.I. pipe (A-Class) on wall and in floor etc., up to 13 metre in length (including bore length). G.I. pipe 20mm dia. (A-class) should be laid in the hole of excavation from bore surface level to 1 feet below ground level and having wire mesh funnel fixed on the top level of the pipe. 300mm x 300mm x 300mm deep haudi of bricks finished with 1:4 cement plaster and haudi covered with cast iron lid having size 300mm x 300mm around the hole of excavation.
1
-
7665.04
Supply and Erection of 8 SWG 4mm dia copper wire run through 20mm dia. GI pipe (A-Class) (As additional length).
10
-
201.96
Supply and Erection of earth rod 20 mm dia for providing earth connections upto line earth with G.I. Wire No. 8SWG. The rod shall be tapered at one end and flatted on other end. The hole size 10mm dia shall be drilled on the flatened side for facilitating connection with G.I. wire and thimble etc. The road shall be grouted upto complete length vertically.GI Earth rod 20 mm dia. 3 mtr. Long
10
-
664.02
PVC INSULATED SINGLE CORE FRCOPPER CONDUCTOR CABLE: Make:- Finolex / / RRkable Havell'sSupply and erection of PVC insulated single core FRcopper conductor cable ISI marked left bare in pipe or casing of suitable size excluding the cost of supply and erection of pipe or casing. PVC insulated copper conductor single core FRcable (ISI marked) overall 1.5 sq.mm, 1100volts grade
200
-
15.11
SHEET METAL CUBICAL PEDESTAL, TOWER STRUCTURES, HT & LT MISCELLANEOUS ITEMS:
S/E of SMCpedestal made from 50mmx50mmx6mm thick MS angle iron frame with 5 sides welded & covered with MS sheet 2mm thick & front side hinged with 4" hinges & locking system with heavy duty 12" sliding door.Placed on MS strip of size 12.5mmx2.5mm thick welded with MS sheet with 4no. legs of 50mmx50mmx6mm thick MS angle iron each of 600mm long with MS sheet 100mmx100mmx6mm thick at the bottom end of the legs.Front door welded x-actionally with MS flat 25mmx5mm.The front side with MS sheet each 75mm wide & a bend of 75mm width outwards & inwards on all sides with tappered top 200mm high.And pedestial with 4 Nos supporting members each of MS flat 50mmx6mm thick acc. to cubical size duly welded & complete pedestal to be painted with 1 coat of red oxide & 2 coats of paint &bonding to the existing earth to be erected in the 1:2:4 CC, the platform of 150mm high from ground level & 450mm thick & 150mm from the top of the CCplatform as per Drawing attached.Cubical Size 900mm high, 600mm wide and 350mm deep
1
-
6948.49
GI PIPE POLES & BRACKETS:
GI PIPE BRACKETS FOR 3 STEPPED STEEL TUBULAR POLES: Supply and erection of G.I. pipe 50mm dia. (medium) Single arm bracket 1.5 metre long each arm welded with MS canopy 80mm inner dia., outer dia 89.5mm (medium), 450mm long suitable for 3 stepped steel tubular swaged and welded pole with top outer section dia. 76.1mm. The MS canopy should have 3no. holes for fixing the bracket at the top end of the pole with the help of 3nos. ½"x1½" size nut bolt of full thread. The bracket should have MS round sheet 3mm thick 90mm dia. welded with MS ring of 90mm dia and 50mm long, 1.62mm thick for covering the top end of the canopy. The MS canopy and GI bracket should be welded at tentative angel 105º (105 degree) inclination with MS sheet 5mm thick triangular in shape having dimensions 225mm x 150mm x 5mm thick with two coats of an approved aluminium paint as desired by Engineer-in-charge at site.
8
-
1096.07
Supply and erection of G.I. pipe 50mm dia. (medium) Double arm bracket 1.5 metre long each arm welded with MS canopy 80mm inner dia., outer dia 89.5mm (medium), 450mm long suitable for 3 stepped steel tubular swaged and welded pole with top outer section dia. 76.1mm. The MS canopy should have 3no. holes for fixing the bracket at the top end of the pole with the help of 3nos. ½"x1½" size nut bolt of full thread. The bracket should have MS round sheet 3mm thick 90mm dia. welded with MS ring of 90mm dia and 50mm long, 1.62mm thick for covering the top end of the canopy. The MS canopy and GI bracket should be welded at tentative angel 105º (105 degree) inclination with MS sheet 5mm thick triangular in shape having dimensions 225mm x 150mm x 5mm thick with two coats of an approved aluminium paint as desired by Engineer-in-charge at site.
2
-
1844.13
SHEET METAL IRON CLAD SWITCHES:
Supply and erection of sheet metal iron clad switch on existing surface with G.I. bolts & nuts/ rag bolts and nuts etc., according to the size of holes in the body of the enclosure including connections with suitable size of thimbles and bonding to the existing earth as Per PWD General Specifications (Electrical Works).Sheet metal iron clad double pole switch 32amp. 415 volts
1
-
1129.24
Providing security Light
Supply and erection of LED flood light 120w with high pressure die cast housing (IP 65 Protected) of Make Jaquar item code LFLD02SO 120XC or its equivallent make & Cat Phillips / Crompton . The fitting will be mounting with the help of necessary arrangement for installation with the parapet of the building including connections, testing & commissioning etc. complete in all respects as per satisfaction and desired by the Engineer-in-charge at site.
10
-
10461
XLPE/ PVC INSULATED UN-ARMOURED CABLES (ON SURFACE):
Supply and laying of XLPE/ P.V.C. insulated P.V.C. sheathed aluminium conductor un-armoured cable working voltage upto and including 1100 volts grade (on surface ) as per PWD General Specifications (Electrical Works):-
Make :- Finolex, Havells, RR Kable, XLPE/ PVC insulated PVC sheathed aluminium conductor unarmoured cable working voltage 1100volts grade 10sq.mm (3 Core)
200
-
120.36
PVC INSULATED SINGLE CORE FRCOPPER CONDUCTOR CABLE: Make:-Finolex,, /RR Kabel/ Havell's Supply and erection of PVC insulated single core FRcopper conductor cable ISI marked left bare in pipe or casing of suitable size excluding the cost of supply and erection of pipe or casing.PVC insulated copper conductor single core FRcable (ISI marked) overall 1.5 sq.mm, 1100volts grade
25
-
15.11
SHEET METAL IRON CLAD SWITCHES:
Supply and erection of sheet metal iron clad switch on existing surface with G.I. bolts & nuts/ rag bolts and nuts etc., according to the size of holes in the body of the enclosure including connections with suitable size of thimbles and bonding to the existing earth as Per PWD General Specifications (Electrical Works). Sheet metal iron clad double pole switch 32amp. 415 volts
1
-
1129.24
EPABX SYSTEM (D3)
Supply & Erection of Digital Hybrid IP-PBX System Configured for 04 Trunk, 04 Digital Extn Ports, 00 GSM Trunk Ports Trunk Ports, 00 PRI & 48 Normal Extensions Expendable to 240 TDM Ports & 999 IP Extension. Make: Matrix Eternity GENX
Make& Model: Matrix Eternity GENX
Digital IP-PBX System 100% Non Blocking.
12 No. Universal Slots.
Universal SMPS.
Auto Attendant, CLI, GSM Trunk, Digital Extension IP Connectivity.
U C S
Voice Mail, PRI Connectivity including all features listed in Product Boucher
complete in all respects as per satisfaction of the Engineer-in-Charge Make : Matrix / Panasonic / NEC
1
-
141863
Supply & Erection of Operator-cum-maintenance console with Large Backlit Display, 12 Direct Dialing Keys, HD sound quality, Duplex Speaker Phone, Touch sense keys including all features listed in Product Boucher. Make: Matrix complete in all respects as per satisfaction of the Engineer-in-Charge Make : Matrix / Panasonic / NEC
1
-
16403
Supply & Erection of 100 Pairs MDF + 100 Pair IDF with Krone Modules & Lockable Box complete in all respect. Make Krone complete in all respects as per satisfaction of the Engineer-in-Charge
1
-
25621
Supply & Erection of 10 Pairs DB with Krone Modules & Lockable Box complete in all respect. Make Krone complete in all respects as per satisfaction of the Engineer-in-Charge
4
-
3048
Supply & Erection of 20 Pairs DB with Krone Modules & Lockable Box complete in all respect. Make Krone complete in all respects as per satisfaction of the Engineer-in-Charge
4
-
3727
Supply & Erection of Basic Wired Telephone with Display, Redial, CLIP & Mute Compatible with EPABX System. Make: Beetel Model: M51/C51 complete in all respects as per satisfaction of the Engineer-in-Charge Make : Beetal / Panasonic
40
-
879
Supply & Erection of 2KVA On-Line sine wave UPS/ Power Plant with inbuilt 36V SMF batteries having 90 minutes backup time. Make-UTL/Aqua power/BPE complete in all respects as per satisfaction of the Engineer-in-Charge Make : APC / Luminous
1
-
32310
Supply & Erection of 02 Pair 0.5mm PVC Dual sheathed Telephone Cable as per ITD Specification with Up to amendments. complete in all respects as per satisfaction of the Engineer-in-Charge
2500
-
28
Supply & Erection of 10 Pair 0.5mm PIJF UN- Armored Telephone Cable manufactured as per ITD Specification with Up to amendments. complete in all respects as per satisfaction of the Engineer-in-Charge
200
-
181
Supply & Erection of 20 Pair 0.5mm PIJF Armoured Telephone Cable manufactured as per ITD Specification with Up to amendments. complete in all respects as per satisfaction of the Engineer-in-Charge
200
-
489
Supply & Erection of RJ-11 Telephone Socket With 3” x 3” size Polycarbonate face plate complete in all respect. Make: D-Link/Legrand/Roma/Anchor. complete in all respects as per satisfaction of the Engineer-in-Charge
40
-
252
Supply & erection of 25 mm ISI marked PVC channel on wall surface. Make AKG/ L&T/ Sanico/LK/MK complete in all respects as approved and desired by the Engineer in charge at site.
100
-
50
COPPER EARTHING:
Earthing of Sheet metal/ iron clad switches and metallic cases etc., with 8 SWG (4mm dia.) electrolytic copper wire thimbled (with 1 nos. copper thimble) to 30 cm x 60 cm x 3 mm thick tinned copper plate (made cylindrical) burried 10 metre below ground level in the hole of excavation having bore dia. 125mm and surrounded by salt & charcoal dust mixture (20 kg.) including fixing the copper wire run through 20mm dia. G.I. pipe (A-Class) on wall and in floor etc., up to 13 metre in length (including bore length). G.I. pipe 20mm dia. (A-class) should be laid in the hole of excavation from bore surface level to 1 feet below ground level and having wire mesh funnel fixed on the top level of the pipe. 300mm x 300mm x 300mm deep haudi of bricks finished with 1:4 cement plaster and haudi covered with cast iron lid having size 300mm x 300mm around the hole of excavation.
1
-
8048.29
PVC, HDPE PIPES & PVC FLEXIBLE PIPES:
Supply & erection of PVC pipes & HDPE pipes (fire retardant) for wiring purposes including bends, inspection boxes etc., where necessary including other petty material as per PWD General Specifications (Electrical Works):- Heavy gauge PVC conduit pipe 25mm dia. (ISI marked) Flushed
1200
-
40.9
Providing Integrated Fire Alarm, Voice Evacuation & Telephone Talk back system. (D4)
Fire Panel & Annunciators
Supply, installation, testing and Commissioning Microprocessor based Multi-loop, True Peer-to-Peer Networkable Addressable Fire Alarm Control Panel with minimum 600 characters LCD display, 4000 event plus 1000 alarm log history events, QWERTY keypad for programming. The panel should be equipped with sufficient numbers of loops considering 20% spare capacity in each loop. Each loop shall have a capacity of minimum 300 analog addressable devices. The panel shall work in degrade mode in case of CPU failure, Products not having this feature may offer Redundant CPU. Four access levels, flash EPROM, 240 volts AC power supply, automatic battery charger, 24 volts sealed lead acid batteries sufficient for 24 hours normal working and 30 mins in alarm condition. The panel shall be complete with Integrated 8 channel Digital Voice Evacuation System Controller capable of broadcasting Evacuation Messages on same peer-to-peer Network and 2 ways Communication Fire Fighters System capable of supervising all the speaker circuits with adequate zone control and accessories. Failure of Fire Panel CPU shall not result in failure of DVC operation. The Fire Fighters Telephone System shall be capable of having minimum 30 Telephones in conference in multiple FFT Risers. Designed to meet UL864, 10th Edition. Make: Notifier/ XLS3000/ JCI IFC
4-loop - With Digital Voice Command Center
Complete in all respects as approved & desired by the Engineer-in-Charge at site.
1
-
675750
Supply, installation, testing and Commissioning Network Repeater Panel with minimum 10" Color Touch Screen display with QWERTY Keypad, mapping minimum 2,00,000 points on network. The NRP shall act as an independent node communicating on the peer to peer network and shall not be dependant on the Fire Panel CPU for operation. Failure of Fire Panel CPU shall not result in failure of NRP operation. Make: Notifier/ XLS3000/ JCI IFC Complete in all respects as approved & desired by the Engineer-in-Charge at site.
1
-
204807.5
Detectors
Supply, installation, testing and Commissioning Addressable Multi-criteria Photo-Thermal Detector with sensitivity range of 0.5 to 4.0% obs/ft.The intelligent multi criteria detection device shall include the ability to combine the signal of the thermal sensor with the signal of the photoelectric signal in an effort to react hastily in the event of a fire situation. It shall also include the inherent ability to distinguish between a fire condition and a false alarm condition by examining the characteristics of the thermal and smoke sensing chambers and comparing them to a database of actual fire and deceptive phenomena. The detector shall have twin bi-colour LED for 360 deg viewing. Addressing shall be with user friendly rotary decimal switches. Designed to meet UL268, 7th Edition Make: Notifier/ XLS3000/ JCI IFC Complete in all respects as approved & desired by the Engineer-in-Charge at site.
352
-
4363.05
Addressable Rate of Rise Heat Detector rated at 8.3 deg C/min. The detector shall have twin bi-colour LED for 360 deg viewing. Addressing shall be with user friendly rotary decimal switches. Make: Notifier/ XLS3000/ JCI IFC Complete in all respects as approved & desired by the Engineer-in-Charge at site.
4
-
3861.55
Modules
Supply, installation, testing and Commissioning Addressable Manual Call Point (Pull down / Break Glass Type). The device shall have an LED which shall blink in normal state & get steady on activation to monitor the heath status of the device. Make: Notifier/ XLS3000/ JCI IFC Complete in all respects as approved & desired by the Engineer-in-Charge at site.
12
-
3961.85
Supply, installation, testing and Commissioning Addressable Control Module for Sounders / Strobes / Sounder cum Strobes. The control module shall provide supervised NAC output rated at 24v DC, 2A. The device shall have an LED which shall blink in normal state & get steady on activation to monitor the heath status of the device. Addressing shall be with user friendly rotary decimal switches. Module shall be supplied with mounting plate from OEM for ease of installation & maintenance. Make: Notifier/ XLS3000/ JCI IFC Complete in all respects as approved & desired by the Engineer-in-Charge at site.
21
-
3861.55
Supply, installation, testing and Commissioning Addressable Relay Module for AHU, Access Control, Lifts, Staircase Pressurization, Fire Suppression & other Third Party Outputs. The relay module shall provide contact rated at 24v DC, 2A. The device shall have an LED which shall blink in normal state & get steady on activation to monitor the heath status of the device. Addressing shall be with user friendly rotary decimal switches. Module shall be supplied with mounting plate from OEM for ease of installation & maintenance. Make: Notifier/ XLS3000/ JCI IFC Complete in all respects as approved & desired by the Engineer-in-Charge at site.
4
-
3861.55
Supply, installation, testing and Commissioning Addressable Monitor Module for Sprinklers, Panic Bars & other Third Party Inputs. The monitor module shall monitor potential free contacts. The device shall have an LED which shall blink in normal state & get steady on activation to monitor the heath status of the device. Addressing shall be with user friendly rotary decimal switches. Module shall be supplied with mounting plate from OEM for ease of installation & maintenance. Make: Notifier/ XLS3000/ JCI IFC Complete in all respects as approved & desired by the Engineer-in-Charge at site.
4
-
3761.25
Supply, installation, testing and Commissioning Isolator Module for Isolating short / dewired / loose circuits with automatic resetting arrangement. Isolator Base can also be proposed, however in that case needs to be considered with each detector & module. The device shall have an LED which shall blink in normal state & get steady on activation to monitor the heath status of the device. Module shall be supplied with mounting plate from OEM for ease of installation & maintenance.Make: Notifier/ XLS3000/ JCI IFC Complete in all respects as approved & desired by the Engineer-in-Charge at site.
20
-
3660.95
Notification Devices
Supply, installation, testing and Commissioning Sounder cum Strobe rated at 80 dBA @ 3m for Audible annunciation and 115cd flashing at 1 Hz for visual indication. UL Listed Make: Notifier/ XLS3000/ JCI IFC Complete in all respects as approved & desired by the Engineer-in-Charge at site.
9
-
7862.5
Supply, installation, testing and Commissioning Directional Sounders with 20 hz to 20 khz operating frequency with minimum 8 distinct sound patterns to indicate corridors, Exit doors, Move upward, move downward etc. to direct Occupants for fast & safe Evacuation. Make: Notifier/ XLS3000/ JCI IFC Complete in all respects as approved & desired by the Engineer-in-Charge at site.
9
-
22567.5
Telephone Talkback
Supply, installation, testing and Commissioning Addressable Fire Fighter's Telephone Jack with suitable supervised module for two way communication between Remote Fire Fighter & Fire Command Center. UL Listed Make: Notifier/ XLS3000/ JCI IFC Complete in all respects as approved & desired by the Engineer-in-Charge at site.
9
-
2932.5
Supply, installation, testing and Commissioning Fire Fighter's Telephone Handset for two way communication between Remote Fire Fighter & Fire Command Center Make: Notifier/ XLS3000/ JCI IFC Complete in all respects as approved & desired by the Engineer-in-Charge at site.
2
-
9227.6
Cables & Accessories
Supply, installation, testing and commissioning of 2C x 1.5 Sqmm, Fire Survival Armored Cable, Glass Mica Tape Over Conductor, XLPE Insulation, LSZH Black Color, Galvanized Steel Round Wire. Galvanized Steel Round Wire (H4 Grade), Outer Color RED. Tested at 950 ℃ for three hour. with all required accessories for surface mounting of wire Approved Makes :Delton/ beldon/Mountxross/ havells Complete in all respects as approved & desired by the Engineer-in-Charge at site.
950
-
191.25
Supply, installation, testing and Commissioning of metal back boxes Complete in all respects as approved & desired by the Engineer-in-Charge at site.
150
-
69.7
Supply, installation, testing and Commissioning of 24 2A power supplies Complete in all respects as approved & desired by the Engineer-in-Charge at site.
10
-
1790.95
Supply, installation, testing and Commissioning of 24V 5A power supplies Complete in all respects as approved & desired by the Engineer-in-Charge at site.
10
-
2898.5
Public Address System
P.A. Amplifier
Supply, installation, testing and Commissioning Digital Audio Amplifier shall be dual channel capable of processing Two of 8 audio channels and total of 100 W at 70.7 VRMS output along with necessary enclosures. The Digital Audio Amplifier shall be fully monitored for fault and alarm reporting. The proposed Digital Audio Amplifiers shall (be Wall/Panel Mounted) not be rail mounted / dependant on Fire Panel CPU for operation. Failure of Fire Panel CPU shall not result in failure of Amplifier operation. Make: Notifier/ XLS3000/ JCI IFC Complete in all respects as approved & desired by the Engineer-in-Charge at site.
2
-
185555
Notification Devices Supply, installation, testing and Commissioning 2W Multi-Tap (0.25W; 0.5W; 1W; 2W), Wall Mount Speakers. The speakers shall be of same make as that of the Control Panel & Amplifiers. They shall be compatible with supplied Amplifiers and shall work on 70.7Vrms. UL Listed Make: Notifier/ XLS3000/ JCI IFC Complete in all respects as approved & desired by the Engineer-in-Charge at site.
103
-
3638
Supply, installation, testing and Commissioning of 2W Multi-Tap (0.25W; 0.5W; 1W; 2W), Ceiling Mount Speakers. The speakers shall be of same make as that of the Control Panel & Amplifiers. They shall be compatible with supplied Amplifiers and shall work on 70.7Vrms. UL Listed & FM Approved . Approved Makes Notifier / Essar /MountXross IFC/Nohmi Bosai Japan/Bosch Complete in all respects as approved & desired by the Engineer-in-Charge at site.
133
-
2762.5
Cables & Accessories
Supply, installation, testing and commissioning of 2C x 1.5 Sqmm, Fire Survival Armored Cable, Glass Mica Tape Over Conductor, XLPE Insulation, LSZH Black Color, Galvanized Steel Round Wire. Galvanized Steel Round Wire (H4 Grade), Outer Color RED. Tested at 950 ℃ for three hour. with all required accessories for surface mounting of wire Approved Makes :Delton/ beldon/Mountxross/ havells Complete in all respects as approved & desired by the Engineer-in-Charge at site.
400
-
191.25
Providing IP CCTV System along with allied accessories (D5)
Supply, erection Testing and Commissioning OF IP DOME CAMERA 3MP Full HD1080 output IP technology True day / night DNR, Smart IR DNR, Smart IR Up to 20-30m IR distance IP66 weatherproof, PoE support, SD Card Storage, 6mm Fixed lens complete in all respect as desired by the engineer in charge at site. Make- MATRIX/CBC/AXIS/HIKVISION/DAHUA complete in all respects as approved and desired by the Engineer in charge at site.
14
-
19300
Supply, erection Testing and Commissioning OF IP BULLET CAMERA 3MP Full HD1080 output IP technology True day / night DNR, Smart IR DNR, Smart IR Up to 20-30m IR distance IP66 weatherproof, PoE support, SD Card Storage, 6mm Fixed lens complete in all respect as desired by the engineer in charge at site. Make- MATRIX/CBC/AXISHIKVISION/DAHUA complete in all respects as approved and desired by the Engineer in charge at site.
14
-
20379
Supply, erection Testing and Commissioning OF 24 Channel IP INPUT NVR with H.265 & Four-stream video compression Support HD-IP cameras with adaptive access Full channel ,@,1080P resolution real-time recording, 2 HDMI and VGA output at up to 1920×1080P resolution, ONVIF, 2 Gigabit Ports, Playback at 1080P resolution up to 4-ch synchronous complete in all respect as desired by the engineer in charge at site. Make MATRIX/CBC/AXISHIKVISION/DAHUA complete in all respects as approved and desired by the Engineer in charge at site.
2
-
80479
Supply, erection Testing and Commissioning of CAT6 UTP Networking Cable of 10/100/1000Mbps DCC in existing PVC conduit complete in all respect as desired by the engineer in charge at site. Make D-Link/Digi-Link/AMP complete in all respects as approved and desired by the Engineer in charge at site.
3000
-
49
Supply, erection Testing and Commissioning of 2000GB Audio Video HDD for NVR recording and playback complete in all respect as desired by the engineer in charge at site. Make- Toshiba/ Seagate complete in all respects as approved and desired by the Engineer in charge at site.
4
-
12568
Supply, erection Testing and Commissioning of 24 port PoE managed Gigabit 10/100/1000Mbps Networking Switch complete in all respect as desired by the engineer in charge at site. Make D-Link/Net-gear/Digi-sol complete in all respects as approved and desired by the Engineer in charge at site.
2
-
39161
Supply, erection Testing and Commissioning of 40” COMMERCIAL LED PANNEL with 2 HDMI Port, VGA Input, in built speaker, min. 50000 hours panel life, computer input,TV INPUT complete in all respect as desired by the engineer in charge at site. Make-Panasonic/LG complete in all respects as approved and desired by the Engineer in charge at site.
2
-
66994
Supply & erection of 2 meter long superior quality HDMI Cable complete in all respect as desired by the engineer in charge at site. Make Standard complete in all respects as approved and desired by the Engineer in charge at site.
2
-
2281
Supply & erection of RJ-45 Male connector complete in all respect as desired by the engineer in charge at site. Make D-Link/Digi-Link/AMP complete in all respects as approved and desired by the Engineer in charge at site.
30
-
29
Supply & erection of 25 mm ISI marked PVC channel on wall surface. Make AKG/ L&T/ Sanico/LK/MK complete in all respects as approved and desired by the Engineer in charge at site.
100
-
48
Supply & erection of 45mm x 45 mm Cable Management Tray slotted Gray Colour ISI marked PVC on wall surface. Make AKG/L&T/LK/MK/ Sanico complete in all respects as approved and desired by the Engineer in charge at site.
10
-
319
Supply & erection of 9U Wall mount 19’’ Rack with glass door, lock & key facility 450mm-550mm depth. with CPD, Cable Manager & Fan. Make: D-Link/Comrack/Netrack complete in all respects as per satisfaction of the Engineer-in-Charge
2
-
13399
PVC, HDPE PIPES & PVC FLEXIBLE PIPES:
Supply & erection of PVC pipes & HDPE pipes (fire retardant) for wiring purposes including bends, inspection boxes etc., where necessary including other petty material as per PWD General Specifications (Electrical Works):- Heavy gauge PVC conduit pipe 25mm dia. (ISI marked) Flushed
1500
-
40.9
26 Persons cum Bed Elevator (D6)
26 Persons cum Bed Elevator ( Make :- KONE, OTIS, THYSSEN KRUPP or SCHNEIDER) Technical Specifications-1
Quantity 1 ( One ) unit
Model TEC-MRL
Type of Elevator Passenger Cum Bed Elevator
Capacity 26 persons, 1768kg
Speed 1.00 m/s
Stops & Openings 4Stops, 4 Openings
Floor designations G,1,2,3
Machine type & Location Gearless -MRL
Control Simplex Collective Selective Control
Drive ACVVVF
Power supply 415 volts, 3 phase, 50Hz, AC
Hoist way dimensions 2450 mm wide x 3300mm deep
Car travel 12000 mm
Overhead 4800 mm
Pit depth 1800mm
Car dimensions 1600 mm wide x 2400mm deep x 2200mm high
Door opening 1100mm wide x 2000mm high
Car door 2 panel automatic centre openingwith ACVF drive in Honeycomb finish
Landing door 2 panel automatic centre opening with ACVF drive in SS Hairline finish
Car design All car walls in Honeycombfinish
Car suspended ceiling S.S Hairline finish with Square LED for car lighting
Car flooring 20mm recess granite marble
Handrail One side Handrail on rear panel
Car operating panel Full length
Landing operating panel Individual landing operating panel for each elevator
Technical Specifications-1
Features included:
1. Alarm button in car operating panel with battery back-up
2. Automatic operation for car fan
3. Adjustable door open time
4. Blower fan in car for ventilation
5. Braille on push buttons
6. Car call cancellation by double pressing floor button in car operation panel
7. Door open and door close buttons in car operating panel
8. Emergency light
9. Full load by-pass
10. Home landing
11. Infra-red screen for car door
12. Intercom
13. Jammed landing operating panel call button by-pass
14. Motor overheat protection
15. Overload function with audio-visual indication in car operating panel
16. Phase failure and phase reversal protection
17. Red dot matrix scrolling display in landing operating panel on All Floors
18. Automatic rescue device in case of power failure
19. Red dot matrix scrolling display in car operating panel
20. Fireman Service
21. Fireman Alarm
1
-
3275000
XLPE/ PVC INSULATED ARMOURED CABLES (LOOSE):
Supply & laying of aluminium conductor XLPE/ P.V.C. insulated armoured and served cable to be laid loose in the existing trench or pipe as per PWD General Specidications 2010:- Make :- Finolex,, Polycab, Havells, V-Guard Aluminium conductor XLPE/ PVC insulated PVC sheathed armoured and served cable working voltage 1100volts grade 25sq.mm (3.5 Core)
75
-
187.6
COPPER EARTHING:
Earthing of Sheet metal/ iron clad switches and metallic cases etc., with 8 SWG (4mm dia.) electrolytic copper wire thimbled (with 1 nos. copper thimble) to 30 cm x 60 cm x 3 mm thick tinned copper plate (made cylindrical) burried 10 metre below ground level in the hole of excavation having bore dia. 125mm and surrounded by salt & charcoal dust mixture (20 kg.) including fixing the copper wire run through 20mm dia. G.I. pipe (A-Class) on wall and in floor etc., up to 13 metre in length (including bore length). G.I. pipe 20mm dia. (A-class) should be laid in the hole of excavation from bore surface level to 1 feet below ground level and having wire mesh funnel fixed on the top level of the pipe. 300mm x 300mm x 300mm deep haudi of bricks finished with 1:4 cement plaster and haudi covered with cast iron lid having size 300mm x 300mm around the hole of excavation.
2
-
8048.29
Supply and Erection of 8 SWG 4mm dia copper wire run through 20mm dia. GI pipe (A-Class) (As additional length).
20
-
201.96
DOUBLE WALLED CORRUGATED (DWC) HDPE PIPES: Supply and erection of double walled corrugated (DWC) HDPE pipe to be laid 1mtr. below ground level including excavation (making necessary trench), placing the pipe in position and back filling with excavated soil etc. of the required size. Make:- AMTEL / Duraline Double walled corrugated (DWC) HDPE pipe 63/51 mm (outer/ inner dia.)
70
-
104.04
Evaluation Notes How It Works ?
Potential Partner
Select Your Requirements