Jawaharlal Institute Of Postgraduate Medical Education And Research Tender
View complete overview of Puducherry JIPMER Tender
Jawaharlal Institute Of Postgraduate Medical Education And Research - JIPMER Tender
Healthcare and Medicine
Eprocure
Opening Date30 Sep 2024
Closing Date28 Oct 2024
Tender AmountRefer Documents
Costs
EMD
₹ 5,000Document Cost
₹ 590Tender Fee
Refer Documents
Summary
Supply Of Consumables And Non-consumables For The Department Of Orthopaedics
Description
Scription for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user
Contact
Tender Id
2024_JIPMP_828447_1Tender No
JIP/Pur.6(1)/OeT/Ortho/2024-26Tender Authority
Jawaharlal Institute Of Postgraduate Medical Education And Research ViewPurchaser Address
-Website
http://https://www.jipmer.edu.in/
GEM & Bid Advisory Services
Get portal registration, tender bidding, product/service listing or vendor/MSME certification services at a nominal cost
Documents
BOQ Items
Half Rings - Dia : 130mm.
200
-
-
Half Rings - Dia : 140mm.
200
-
-
Half Rings - Dia : 150mm.
200
-
-
Half Rings - Dia : 160mm.
60
-
-
5/8 Ring - 160mm
10
-
-
Threaded Rods
-
-
-
Size : 80 mm
80
-
-
Size : 100mm
80
-
-
Size : 120 mm
80
-
-
Size : 150 mm
80
-
-
Size : 200 mm
80
-
-
Size : 250 mm
40
-
-
Size : 300 mm
40
-
-
Threaded rods : Slotted
40
-
-
Size : 60 mm
20
-
-
Graduated Telescopic Rods - Size 150mm
20
-
-
Post- Male/Female
-
-
-
Male Size : 3 Holes
20
-
-
Female Size : 3 Holes
20
-
-
Hinges male Standard
200
-
-
Hinges male Low profile.
100
-
-
Hinges female Standard
200
-
-
Hinges female Low Profile
100
-
-
Hinges-90 degree Standard
100
-
-
Hinges-90 degree Low profile
20
-
-
Long Connection Plates
20
-
-
Size : 8 Holes, 155 mm
6
-
-
Connected Plates with Threaded ends
-
-
-
Size : 7 Holes, Length 175 mm
5
-
-
Short Conn.Plate 2 Holes Length 35mm
20
-
-
Short Conn.Plate 3 Holes Length 45mm
20
-
-
Twisted Plates - Size:3 Holes Length 65mm
10
-
-
Twisted Plates - Size: 2 Holes plates
100
-
-
Bayonet Point-Cortical 1.8mm x 370mm
1000
-
-
Wire Fixation Buckle
10
-
-
Wire fixation Bolt' Cannulated
800
-
-
Wire fixation Bolt Slotted
200
-
-
Bolt, 6" Size : 10 mm
400
-
-
Bolt, 6" Size : 16 mm
1000
-
-
Bolt, 6" Size : 30 mm
200
-
-
Slotted Washers 4.0mm
200
-
-
Spacing Washers 2.0mm
200
-
-
Flat Sided Washers 2.0mm
200
-
-
Flat Sided Washers 4.0mm
200
-
-
Nut 6mm
2000
-
-
Nylon Insert Nut
500
-
-
Square Nut
500
-
-
Threaded Socket,Size : 20 mm
10
-
-
Threaded Socket, Size : 30 mm
10
-
-
Threaded Socket, Size : 40 mm
10
-
-
Blocks for Half Pins
10
-
-
Size : 1 Holes
200
-
-
Size : 2 Holes
100
-
-
Size : 3 Holes
100
-
-
Size : 4 Holes
100
-
-
Sleeves 6mm
4
-
-
Set screws
4
-
-
90 deg. Arch,Large size
10
-
-
120 deg.Arch,Large size
10
-
-
Oblique Support
80
-
-
Olive Wire with stopper made out of single piece
500
-
-
Composite Foot Rings with Carbon Reinforcement Short Arm
2
-
-
Composite Foot Rings with Carbon Reinforcement Long Arm
2
-
-
II - The Rail Fixation System: Adult (The raw material used for implants shoud be SS 316-L conforming to ASTM F 138-97 or ISO-5832-1 Certificate confirming to this from raw material supplier at billet level should be submitted.) (INSTRUMENTS)
-
-
-
Trocar
2
-
-
Drill Bits 3.2x200mm
2
-
-
Drill Bits 4.8x200mm
2
-
-
Templates
2
-
-
Forendclampandcentralclamp
2
-
-
ForSwivel Clamp
2
-
-
Drill Guides 6x3.2x40
2
-
-
Drill Guides 6x3.2x80
2
-
-
Drill Guides 6x5x40
2
-
-
Drill Guides 6x5x80:8 Nos.
2
-
-
Drill Guides 5x2x43mm
2
-
-
Drill Guides 5x2x83mm
2
-
-
Screw Guide 8x6x60mm
2
-
-
Screw Guide 8x6x100mm
2
-
-
AllenKey 6mm
2
-
-
Appliances:
-
-
-
Rail - 240mm long
10
-
-
Rail - 300mm long
10
-
-
Rail - 400mm long
4
-
-
CD Unit
10
-
-
40 mm
4
-
-
80 mm
4
-
-
Implants - Tapered pin 6mm to 5mm
-
-
-
Length 130mm thread length30mm
300
-
-
Length130mmthreadlength40mm
300
-
-
Length130mmthreadlength50mm
200
-
-
Length150mmthreadlength30mm
300
-
-
Length150mmthreadlength40mm
300
-
-
Length150mmthreadlength50mm
200
-
-
Length170mmthreadlength40mm
200
-
-
Length170mmthreadlength50mm
200
-
-
Length170mmthreadlength60mm
200
-
-
Length200mmthreadlength40mm
60
-
-
Length200mmthreadlength50mm
60
-
-
Length200mmthreadlength60mm
60
-
-
Tapered 6mm to 5mm-With Hydroxyapetite Coating for Threads
-
-
-
Length130mmThreadLength30mm
50
-
-
Length130mmThreadLength40mm
50
-
-
Length130mmThreadLength50mm
50
-
-
Length150mmThreadLength30mm
50
-
-
Length150mmThreadLength40mm
50
-
-
Length150mmThreadLength50mm
20
-
-
Length170mmThreadLength40mm
20
-
-
Length170mmThreadLength50mm
20
-
-
Length170mmThreadLength60mm
20
-
-
Length200mmThreadLength40mm
20
-
-
Length200mmThreadLength50mm
20
-
-
Length200mmThreadLength60mm
20
-
-
Container
-
-
-
Container for Rail Fixator System for Appliances
1
-
-
Container for Rail Fixator System for Instruments
1
-
-
Container for Rail Fixator System for Implants
1
-
-
The Rail Fixation System: Pediatric - Appliances
-
-
-
CD Unit-Pediatric
5
-
-
Rail-Pediatric
5
-
-
150mm
5
-
-
200mm
10
-
-
250mm
10
-
-
Central Clamp-Pediatric
10
-
-
End clamp-Pediatric
10
-
-
Swivel clamp-Pediatric
5
-
-
T clamp Pediatric
5
-
-
Implants: Tapered 4.5mm to 3.5mm
-
-
-
Length100mmthreadlength20mm
40
-
-
Length100mmthreadlength30mm
40
-
-
Length120mmthreadlength30mm
40
-
-
Length120mmthreadlength40mm
40
-
-
Tapered4.5mmto3.5mm-WithHydroxyapetiteCoatingforThreads
-
-
-
Length100mmThreadLength20mm
5
-
-
Length100mmThreadLength30mm
5
-
-
Length120mmThreadLength30mm
5
-
-
Length120mmThreadLength40mm
5
-
-
Instruments:
-
-
-
ScrewGuide;8x6x60mm8nos
5
-
-
Drillguide-6x3.2x40mm-8nos
5
-
-
Drillbit3.2x200mm
5
-
-
HalfPinintroducerDtype
5
-
-
AllenKey - 5mm
5
-
-
Templates for pediatric end and central clamp
5
-
-
Template for Pediatric swivel clamp
5
-
-
Container for Pediatric Rail Fixator System appliances
2
-
-
Container for Pediatric Rail Fixator System Instruments
2
-
-
Container for Pediatric Rail Fixator System Implants
2
-
-
III - CONSUMABLES - ARTHROPLASTY
-
-
-
Hip prosthesis-Femoral – Uncemented – Bipolar - fixed (Fenestrated) STERILE PACKING; Sizes : between 35mm and 53mm (Unused sizes will be exchanged for used-up sizes during the course of tender contract period at no further costs)
40
-
-
Hip prosthesis- Femoral – Cemented – Bipolar- Fixed (non-fenestrated) STERILE PACKING; Sizes : between 35mm and 53mm (Unused sizes will be exchanged for used-up sizes during the course of tender contract period at no further costs)
50
-
-
Hip prosthesis- Femoral – Cemented – Bipolar – Modular (Mueller type) Each unit consists one number of variable sizes of
1. Cemented Femoral Stem
2. Bone Cement ( antibiotic cement 40 gms)
3. Bipolar Cup (Shell and UHMWPE insert)
4. Femoral head
(Unused sizes will be exchanged for used up sizes during the course of tender contract period at no further costs)
50
-
-
Hip prosthesis- Femoral – Uncemented – Bipolar – Modular (Mueller type) Each unit consists one number of variable sizes of
1. Uncemented Stem
2. Bipolar Cup ((Shell and UHMWPE insert)
3. Femoral head ( Unused sizes will be exchanged for used up sizes during the course of the year at no further costs)
50
-
-
Hip prosthesis- Femoral – Uncemented – Revision- Modular Femoral stem with separate distal and proximal sizing – consisting of separate coated metaphyseal sleeve of various sizes, Standard and
lateral neck components of varying lengths and offset and uncemented stem of varying length
Each unit consists of one number of variable sizes of
1. Uncemented modular femoral stem
2. Uncemented modular metaphyseal stem
3. Neck component
4. Femoral head
5. Uncemented porous coated cup. 6.Acetabular cup liner UHMWPE
7. Cancellous bone screws 6.5mm ( 2 Nos – 20mm,25mm )(Shelf life of all items prior to expiry date must be at least 3 years )
10
-
-
Hip prosthesis- Total – Cemented Each unit consists one number of variable sizes of
1.Cemented Femoral stem (Triple taper type)
2.Cemented UHMWPE flanged cup.
3. Femoral head – Diameter 28mm/ 32mm/ 36 mm with adjustable neck length
4. Cement restrictor
5. Canal centraliser
6. Antibiotic Bone cement (2 packets of 40g each)
(Shelf life of all items, prior to expiry date must be at least 3-5 years)
30
-
-
Hip prosthesis- Total – Uncemented Each unit consistsof one number of variable sizes of 1.Uncemented Femoral stem- HA coated
2.Uncemented porous coated cup. 3.Acetabular cup liner UHMWPE
4. Femoral head – Diameter 28mm / 32mm/ , 36 mm / with adjustable neck lengths
5.Cancellous bone screws 6.5mm ( 2 Nos – 20mm,25mm )(Shelf life of all items prior to expiry date must be at least 3-5 years )
40
-
-
Knee prosthesis- Total – Cemented Each unit consists one of number of variable sizes of
1. Femoral component (CoCr) Right/left
2. Tibial tray keeled(CoCr)
3. UHMWPE tibial insert
4. UHMWPE patella component fixed
5. 2 Packets of antibiotic cement 20 gms each
(Shelf life of all items prior to expiry date must be at least 3-5 years)
30
-
-
Megaprosthesis Distal femur Each unit consists of one number of variable sizes of
1.Distal femur component Right
2. Proximal tibia component
3. Resection piece
4. Intramedullary stem
5. Antibiotic bone cement 40gm - 02 nos
4
-
-
Megaprosthesis Distal femur Each unit consists of one number of variable sizes of
1.Distal femur component Left
2. Proximal tibia component
3. Resection piece
4. Intramedullary stem
5. Antibiotic bone cement 40gm - 02 nos
4
-
-
Megaprosthesis Proximal femur - Each unit consists of one number of variable sizes of 1.
Modular Bipolar cup
2. Modular head trochanteric component. Right
3. resection piece.
4. Intramedullary stem piece
5. Antibiotic bone cement 40gm - 01nos.
4
-
-
Megaprosthesis Proximal femur - Each unit consists of one number of variable sizes of 1.
Modular Bipolar cup
2. Modular head trochanteric component. Left
3. resection piece.
4. Intramedullary stem piece
5. Antibiotic bone cement 40gm - 01nos.
4
-
-
Megaprosthesis Proximal Humerus- Each unit consists of one number of variable sizes of
1.Proximal humerus component Right/Left 2.Resection piece.
3. Humeral Intramedullary stem
4. Antibioticcement 20gm - 02nos
6
-
-
Megaprosthesis Proximal Tibia -Each unit consists of one number of variable sizes of
1.Distal femur component Right
2.Proximal tibia component 3.Resection piece
4.Intramedullary stem
5. Antibioticcement 40gm - 02 nos
4
-
-
Megaprosthesis Proximal Tibia -Each unit consists of one number of variable sizes of
1.Distal femur component Left
2.Proximal tibia component 3.Resection piece
4.Intramedullary stem
5. Antibioticcement 40gm - 02 nos
4
-
-
Megaprosthesis Total femur Each unit consists of one number of variable sizes of
1. Proximal femur head component comprising of Modular bipolar cup 2.Modular head, trochanteric component Left/Right/Neutral.
3. Resection coupler
4. Resection piece 5.Distal femur component
6.Proximal tibia component
7. AntibioticCement 40gm 03 nos.
1
-
-
Shoulder prosthesis – Humeral - modularconsisting of cemented humeral stems of various sizes with Humeral head (various options) with the option of combining different humeral stems with humeral head separately Each unit consists of one number of variable sizes of
1. Cemented modular humeral component 2Humeral head
3. One packets of antibiotic cement 20 gms
(Shelf life of all items prior to expiry date must be at least 3 years )
5
-
-
Elbow prosthesis – Total–Cemented- modular Cemented prosthesis with various humeral lengths and sizes with anatomical ulnar stems of varying sizes
Each unit consistsof one number of variable sizes of
1. Cemented modular distal humeral component
2. Cemented ulnar component Right/Left
3. Two packets of antibiotic cement 20 gms each
(Shelf life of all items prior to expiry date must be at least 3-5 years )
2
-
-
Radial head prosthesis – Cemented
(Implant with straight and curved stems, head (of varying head diameter and height)
30
-
-
Dual mobility Uncemented Total Hip Replacement consists of 1. HA Coated Femoral Stem
2. Acetabulat Shell
3. Linear Cup Polyethyelene 4. Co-Cr Head
10
-
-
Revision acetabular Cup - Uncemented
1. Porous Coated - 2 Nos.
2. Cup cage construction - 1 No.
3. Triflange - 1 No.
1
-
-
Antibiotic Bone cement 40g High viscosity
60
-
-
Antibiotic Bone cement 40g Low viscosity, for use in cement gun
60
-
-
Cement mixing system, Each unit consists one number of
1. Cement mixing system (Vacuum based) 2.Femoral break way nozzle
3. Pressuriser. The sample must be compatible with the
(Shelf life of all items prior to expiry date must be at least 3-5 years)
20
-
-
IV - CONSUMABLES - SPINE
-
-
-
Spine BIOPSY KIT
Tissue Bipsy device provided with ergonomic handle.
The needle should be equipped with a cannula made of AISI 304 stainless tempered steel in accordance with international standards The needle should have centimeter markings on the cannula surface, allow to easily determine the depth of insertion into the bone tissue. should have special sharpening at “fish mouth” of the needle tip. the sample architecture.
Needle should improve the penetration capacity establishing a perfect cylindrical cutting that maintains intact
The set shouldinclude: -extraction wire to insert into the cannula tip - Luer-lock cap (on the handle) to avoid the blood loss during the extraction step.
Needle should be equipped with a stylet with trocar pyramidal tip to allow a quick and less invasive penetration into the cortical.
20
-
-
Demineralised bone matrix 2.5cc
5
-
-
Demineralised bone matrix 5 cc
5
-
-
Bone Substitutes This should be an rhBMP-2 (recombinant human bone morphogenetic protein-2) formulation combined with a bovine-derived absorbable collagen sponge (ACS) carrier. Should be FDA & DGCI APPROVED
10
-
-
OLIF/ XLIF cage
10
-
-
Stand alone OLIF '/ DLIF cage assembly - cage plug screws
10
-
-
Expandable cages '/ interbody spacers for use in dorsal and lumbar spine made of Titanium.Should have USFDA & DGCI Approval.
Instrumentation should be provided at the time of surgery. (assorted sizes).
10
-
-
Interbody cages made of Trabecular Metal Material for use in lumbar spine fusion. Instrumentation should be provided at the time of surgery. (assorted sizes).
10
-
-
Lumbar Interbody PEEK cage: Interbody Implant for use in Lumbar interbody fusion. (assorted sizes).
20
-
-
Lumbar Interbody Titanium cage : Interbody Implant for use in Transforaminal lumbar interbody fusion (TLIF) procedures (assorted sizes).
50
-
-
Extended Tandem Connectors for 4.5 rod system
for Paediatric deformity to facilitate intra-operative compression and '/ or distraction maneuvers
20
-
-
Spinal rod to rod connectors compatable with 5.5 mm Titanium rods
20
-
-
Domino Rod to Rod Connector (Open Type) Compatable with 5.5 mm rod
10
-
-
Domino Rod to Rod Connector (Closed Type) Compatable with 5.5 mm rod
10
-
-
Transverse connector assembly '/ cross-links assembly for lumbar spine compatible with 5.5 mm rods (Titanium) US FDA & DGCI APPROVED. Instrumentaion should be provided at the time of surgery.
20
-
-
PAEDIATRIC SPINE HOOKS (Compatible with 4.5mm rods) ASSORTED TYPES( supralaminar, infralaminar, pedicle and transverse process hooks)
20
-
-
ADULT SPINE HOOKS (Compatible with 5.5 mm rods) ASSORTED TYPES( supralaminar, infralaminar, pedicle and transverse process hooks)
50
-
-
Kyphoplasty kit - with 1 baloon and kyphoplasty cement
6
-
-
Titanium mesh cage(Harms type cage) assorted sizes
20
-
-
5.5 mm Rod for MIS Surgery
Rods should Reduces trauma to patient avoiding additional incisions for rod insertion
20
-
-
5.5 mm Rods for spine fixation (Titanium), 400mm
20
-
-
5.5 mm Rods for spine fixation (Cobalt Chrome), 400mm
10
-
-
G4 Reverse Threaded polyaxial pedicle screw compatible with 5.5 mm Rod with instruments on loaner basis - 5.5 x 35 mm screw with set screw
20
-
-
G4 Reverse Threaded polyaxial pedicle screw compatible with 5.5 mm Rod with instruments on loaner basis - 5.5 x 40 mm screw with set screw
20
-
-
G4 Reverse Threaded polyaxial pedicle screw compatible with 5.5 mm Rod with instruments on loaner basis - 6.5 x 35 mm screw with set screw
20
-
-
G4 Reverse Threaded polyaxial pedicle screw compatible with 5.5 mm Rod with instruments on loaner basis - 6.5 x 40 mm screw with set screw
20
-
-
G4 Reverse Threaded polyaxial pedicle screw compatible with 5.5 mm Rod with instruments on loaner basis - 6.5 x 45 mm screw with set screw
20
-
-
Dual Lead titanium pedicle screw with square thread closure mechanism compatible with 5.5 mm Rod with instruments on loaner basis - 5.5 x 35 mm screw with set screw
20
-
-
Dual Lead titanium pedicle screw with square thread closure mechanism compatible with 5.5 mm Rod with instruments on loaner basis - 5.5 x 40 mm screw with set screw
20
-
-
Dual Lead titanium pedicle screw with square thread closure mechanism compatible with 5.5 mm Rod with instruments on loaner basis - 6.5 x 35 mm screw with set screw
20
-
-
Dual Lead titanium pedicle screw with square thread closure mechanism compatible with 5.5 mm Rod with instruments on loaner basis - 6.5 x 40 mm screw with set screw
20
-
-
Dual Lead titanium pedicle screw with square thread closure mechanism compatible with 5.5 mm Rod with instruments on loaner basis - 6.5 x 45 mm screw with set screw
20
-
-
Dual Lead titanium low profile pedice Screw for Paediatric Spine Deformity compatible with 4.5 mm rod - 4 x 20 mm screw with set screw
10
-
-
Dual Lead titanium low profile pedice Screw for Paediatric Spine Deformity compatible with 4.5 mm rod - 4 x 25 mm screw with set screw
10
-
-
Dual Lead titanium low profile pedice Screw for Paediatric Spine Deformity compatible with 4.5 mm rod - 4.5 x 20 mm screw with set screw
10
-
-
Dual Lead titanium low profile pedice Screw for Paediatric Spine Deformity compatible with 4.5 mm rod - 4.5 x 25 mm screw with set screw
10
-
-
Dual Lead titanium low profile pedice Screw for Paediatric Spine Deformity compatible with 4.5 mm rod - 4.5 x 30 mm screw with set screw
10
-
-
Cannulated titanium pedicle screw for MIS compatible with 5.5 mm Rod with instruments on loaner basis - 5.5 x 35 mm screw with set screw
25
-
-
Cannulated titanium pedicle screw for MIS compatible with 5.5 mm Rod with instruments on loaner basis - 5.5 x 40 mm screw with set screw
25
-
-
Cannulated titanium pedicle screw for MIS compatible with 5.5 mm Rod with instruments on loaner basis - 6.5 x 35 mm screw with set screw
25
-
-
Cannulated titanium pedicle screw for MIS compatible with 5.5 mm Rod with instruments on loaner basis - 6.5 x 40 mm screw with set screw
25
-
-
Cannulated titanium pedicle screw for MIS compatible with 5.5 mm Rod with instruments on loaner basis - 6.5 x 45 mm screw with set screw
25
-
-
S2 Alar iliac screws Titanium compatable with 5.5 mm rods. Assorted sizes.
50
-
-
Hydroxy apatite coated pedicle screws compatible with 5.5mm rod with instruments on loaner basis - 5.5 x 40 mm screw with set screw
10
-
-
Hydroxy apatite coated pedicle screws compatible with 5.5mm rod with instruments on loaner basis - 5.5 x 45 mm screw with set screw
10
-
-
Hydroxy apatite coated pedicle screws compatible with 5.5mm rod with instruments on loaner basis - 6.5 x 40 mm screw with set screw
10
-
-
Hydroxy apatite coated pedicle screws compatible with 5.5mm rod with instruments on loaner basis - 6.5 x 45 mm screw with set screw
10
-
-
Hydroxy apatite coated pedicle screws compatible with 5.5mm rod with instruments on loaner basis - 7.0 x 40 mm screw with set screw
10
-
-
Hydroxy apatite coated pedicle screws compatible with 5.5mm rod with instruments on loaner basis - 7.5 x 45 mm screw with set screw
10
-
-
Hydroxy apatite coated pedicle screws compatible with 5.5mm rod with instruments on loaner basis - 7.5 x 45 mm screw with set screw
10
-
-
Titanium pedicle screws - Polyaxial compatible with 5.5 mm rod with instrumets on loaner basis - 4.5 x 25 mm screw with set screw.
30
-
-
Titanium pedicle screws - Polyaxial compatible with 5.5 mm rod with instrumets on loaner basis - 4.5 x 30 mm screw with set screw.
30
-
-
Titanium pedicle screws - Polyaxial compatible with 5.5 mm rod with instrumets on loaner basis - 4.5 x 35 mm screw with set screw.
30
-
-
Titanium pedicle screws - Polyaxial compatible with 5.5 mm rod with instrumets on loaner basis - 5.5 x 30 mm screw with set screw.
30
-
-
Titanium pedicle screws - Polyaxial compatible with 5.5 mm rod with instrumets on loaner basis - 5.5 x 35 mm screw with set screw.
30
-
-
Titanium pedicle screws - Polyaxial compatible with 5.5 mm rod with instrumets on loaner basis - 5.5 x 40 mm screw with set screw.
30
-
-
Titanium pedicle screws - Polyaxial compatible with 5.5 mm rod with instrumets on loaner basis - 6.5 x 35 mm screw with set screw.
30
-
-
Titanium pedicle screws - Polyaxial compatible with 5.5 mm rod with instrumets on loaner basis - 6.5 x 40 mm screw with set screw.
30
-
-
Titanium pedicle screws - Polyaxial compatible with 5.5 mm rod with instrumets on loaner basis - 6.5 x 45 mm screw with set screw.
30
-
-
Titanium pedicle screws - Polyaxial compatible with 5.5 mm rod with instrumets on loaner basis - 6.5 x 50 mm screw with set screw.
30
-
-
Spine Pedical screws (Titanium) - Polyaxial Reduction screws compatible with 5.5 mm Titanium rods, 5.5 x 40 mm with set screw
30
-
-
Spine Pedical screws (Titanium) - Polyaxial Reduction screws compatible with 5.5 mm Titanium rods, 5.5 x 45 mm with set screw
30
-
-
Spine Pedical screws (Titanium) - Polyaxial Reduction screws compatible with 5.5 mm Titanium rods, 6.5 x 40 mm with set screw
30
-
-
Spine Pedical screws (Titanium) - Polyaxial Reduction screws compatible with 5.5 mm Titanium rods, 6.5 x 45 mm with set screw
30
-
-
Titanium pedicle screws - Fixed (Monoaxial) compatible with 5.5 mm rod with instrumets on loaner basis - 4.5 x 25 mm screw with set screw.
30
-
-
Titanium pedicle screws - Fixed (Monoaxial) compatible with 5.5 mm rod with instrumets on loaner basis - 4.5 x 30 mm screw with set screw.
30
-
-
Titanium pedicle screws - Fixed (Monoaxial) compatible with 5.5 mm rod with instrumets on loaner basis - 4.5 x 35 mm screw with set screw.
30
-
-
Titanium pedicle screws - Fixed (Monoaxial) compatible with 5.5 mm rod with instrumets on loaner basis - 5.5 x 30 mm screw with set screw.
30
-
-
Titanium pedicle screws - Fixed (Monoaxial) compatible with 5.5 mm rod with instrumets on loaner basis - 5.5 x 35 mm screw with set screw.
30
-
-
Titanium pedicle screws - Fixed (Monoaxial) compatible with 5.5 mm rod with instrumets on loaner basis - 5.5 x 40 mm screw with set screw.
30
-
-
Titanium pedicle screws - Fixed (Monoaxial) compatible with 5.5 mm rod with instrumets on loaner basis - 6.5 x 35 mm screw with set screw.
30
-
-
Titanium pedicle screws - Fixed (Monoaxial) compatible with 5.5 mm rod with instrumets on loaner basis - 6.5 x 40 mm screw with set screw.
30
-
-
Titanium pedicle screws - Fixed (Monoaxial) compatible with 5.5 mm rod with instrumets on loaner basis - 6.5 x 45 mm screw with set screw.
30
-
-
Titanium pedicle screws - Fixed (Monoaxial) compatible with 5.5 mm rod with instrumets on loaner basis - 6.5 x 50 mm screw with set screw.
30
-
-
Titanium pedical Screws - Uniplanar Compatable with 5.5 mm rod with instrumets on loaner basis - 4.5 x 25 mm screw with set screw.
20
-
-
Titanium pedical Screws - Uniplanar Compatable with 5.5 mm rod with instrumets on loaner basis - 4.5 x 30 mm screw with set screw.
20
-
-
Titanium pedical Screws - Uniplanar Compatable with 5.5 mm rod with instrumets on loaner basis - 4.5 x 35 mm screw with set screw.
20
-
-
Titanium pedical Screws - Uniplanar Compatable with 5.5 mm rod with instrumets on loaner basis - 5.5 x 25 mm screw with set screw.
20
-
-
Titanium pedical Screws - Uniplanar Compatable with 5.5 mm rod with instrumets on loaner basis - 5.5 x 30 mm screw with set screw.
20
-
-
Titanium pedical Screws - Uniplanar Compatable with 5.5 mm rod with instrumets on loaner basis - 5.5 x 35 mm screw with set screw.
20
-
-
Fenestrated Spine Pedicle screw compatible with 5.5 mm rod with instrumets on loaner basis - 5.5 x 35 mm screw with set screw and cement introducer assemby
10
-
-
Fenestrated Spine Pedicle screw compatible with 5.5 mm rod with instrumets on loaner basis - 5.5 x 40 mm screw with set screw and cement introducer assemby
10
-
-
Fenestrated Spine Pedicle screw compatible with 5.5 mm rod with instrumets on loaner basis - 6.5 x 35 mm screw with set screw and cement introducer assemby
10
-
-
Fenestrated Spine Pedicle screw compatible with 5.5 mm rod with instrumets on loaner basis - 6.5 x 40 mm screw with set screw and cement introducer assemby
10
-
-
Fenestrated Spine Pedicle screw compatible with 5.5 mm rod with instrumets on loaner basis - 6.5 x 45 mm screw with set screw and cement introducer assemby
10
-
-
Vertebral Body Augmentation KIT
KIT Should contain vertebral body augmentation Cement
This should allows for an 8-10 minute working time at 68F'/20C, and enable a controlled introduction of cement.
KIT Should Consists of a needle and a stylet for bone access. The needle also acts as a cannula through which the cement is introduced into the vertebra
KIT Should Consist of 15 gauge biopsy needle consists of a needle and stylet intended for use through an 11 gauge or 13 gauge introducer needle.
10
-
-
Low viscosity vertebropasty cement 20g
20
-
-
Pre-bent sub-laminar wire
50
-
-
V - CONSUMABLES - Arthroscopy
-
-
-
Disposable arthroscopic diathermy cable with tip compatible with stryker diathermy console 90 degree
15
-
-
Titanium suture disc
10
-
-
ADJUSTABLE LOOP 4MM X 12MM
40
-
-
Biocomposite Interference Screws of various lenght sizes from 23mm to 35mm with dia from 7mm to 11mm. Two sets of instrumentation should be provided on loaner basis.
200
-
-
Knotless Ligament Anchor (2.6/3.5mm) [PEEK]
20
-
-
Fibre loop Size 2 -0 with Straight needle
20
-
-
Titanium interference screw sizes from 7 to 10mm of various lengths from 23 to 35mm with screw drivers. One set of instrumentation should be provided on loaner basis.
40
-
-
PEER interference screw of various lenght sizes from 23mm to 35mm with dia from 6mm to 7mm. One set of instrumentation should be provided on loaner basis.
20
-
-
FIBRE WIRE 2-0 Size with Needle (Curved)
50
-
-
Titanium anchors with high tension suture material 2.8mm'/3mm
40
-
-
5mm suture anchor Titanium
10
-
-
All Suture Anchors (1.5/1.8mm)
10
-
-
A Sterile, disposable at least 20cm length flexible needles in pairs looped together with 2-0 Ultra high molecular weight polyethylene suture for inside out repair of meniscus
10
-
-
A sterile disposable all inside menisus repair kit with preloaded 2-0 UHMW Polyethylene Suture (Strainght)
10
-
-
A sterile disposable all inside menisus repair kit with preloaded 2-0 UHMW Polyethylene Suture (Right Curved)
10
-
-
A sterile disposable all inside menisus repair kit with preloaded 2-0 UHMW Polyethylene Suture (Left Curved)
10
-
-
A sterile disposable all inside menisus repair kit with preloaded 2-0 UHMW Polyethylene Suture (Reverse Curved)
10
-
-
Fixation Button with loop for Acromio Clavicular Joint Stabilization
10
-
-
VI - CONSUMABLES - PAEDIATRIC IMPLANTS
-
-
-
PEDIATRIC DHS with lag screw and cortical screw assembly - 135 DEGREE(SHORT & LONG BARREL) with 3.5 mm screws, 3 TO 7
HOLES
20
-
-
Titanium / stainless steel telescopic Intramedullary nail consists of male & female; size : 2 - 6mm diameter, length : 20 - 40mm
20
-
-
Cannulated Paediatric Osteotomy blade plate - Child Hip plate 3.5mm, angulation 90° with blade length 26, 32, 38mm and displacement 4mm, 8mm
12
-
-
Cannulated Paediatric Osteotomy blade plate - Child Hip plate 4.5mm, angulation 80°, 90°, 100° with blade length 35, 45mm and displacement
4 & 8mm
12
-
-
Cannulated Paediatric Osteotomy blade plate - Infant Hip plate 3.5mm, angulation 90° with blade length 25, 32mm and displacement 7mm
6
-
-
Cannulated Paediatric Osteotomy blade plate - Adolescent hip plate 4.5mm, angulation 90°, 95°, condylar plate - 5, 7, 9 holes with blade
length 40, 50, 60, 70mm.
24
-
-
Medial high tibia plate compatible with Proximal tibia osteotomy system
5
-
-
Proximal tibia osteotomy system; one each of - osteotomy chisels, bone spreader, gap measuring device
1
-
-
3.5mm epiphyseal 8 shaped plate
40
-
-
LCP PEDIATRIC HIP PLATES with screws (size-20-110mm) assembly 3.5 & 5mm, 3 to 9 HOLED, angles 90 to 130 degrees. provision for exchange of used implants should be made.
20
-
-
Proximal femoral paediatric lcp plate system with screws
10
-
-
Adolescent nailing system with nails and bolts for the paediatric shaft of femur fracture size 8-10mm diameter and length (240-400mm)
15
-
-
Distal femoral osteotomy system with medial osteotomy tomo fix plates
15
-
-
Enders nailing system with nails for femoral and tibial shaft fracture size 2- 5mm in diameter and length 240mm- 400mm
15
-
-
2.4 distal radius variable angle styloid plate 4-8holes titanium 1 unit consists of 1 plate and locking screws for available holes
10
-
-
VII - CONSUMABLES - TRAUMA
ANATOMICAL LOCKING PLATES (TITANIUM): Costing has
to be given per unit i.e. Plate plus screws. For example, in a 4 holed plate includes 2 cancellous screws and 4 diaphyseal screws.
Screws to be provided at the time of surgery. Screw sizes will be determined during surgery. Instrumentation to be provided on loaner basis
-
-
-
3.5 distal radial locking plate right and left 4 to 12 holes (TITANIUM) 1 unit consists of 1 plate and locking screws for all the available holes.
10
-
-
3.5 lateral distal humerous locking plate right and left ( 4,6,8,10,12holes) (TITANIUM) 1 unit consists of 1 plate and locking screws for all the available holes.
10
-
-
3.5 medial distal humerous locking plate right and left (4,6,8,10,12holes) (TITANIUM) 1 unit consists of 1 plate and locking screws for all the available holes.
10
-
-
3.5mm LATERAL DISTAL TIBIAL LOCKING PLATE Right & left (
6, 8, 10, 12,14,16,18 holes)
(TITANIUM) 1 unit consists of 1 plate and locking screws for all the available holes.
20
-
-
3.5mm MEDIAL DISTAL TIBIAL LOCKING PLATE Right & Left (
6, 8, 10, 12 ,14,16,18 holes) (TITANIUM) 1 unit consists of 1 plate and locking screws for all the available holes.
20
-
-
Calcaneal locking plate Right & Left ( ANATOMICAL) 3.5 mm (TITANIUM) 1 unit consists of 1 plate and 8 locking screws.
10
-
-
DISTAL FEMORAL LOCKING PLATE AND SCREWS
(TITANIUM) - RIGHT & LEFT (4 Holes to 12 holes)
1 UNIT CONSISTS OF i) PLATE-1 No.,(left or right) ii) 6.5'/7 MM LOCKING SCREWS - At least 5 Nos. FOR PLATE HEAD, iii) 4.5'/5 MM LOCKING CORTICAL SCREWS - at least 5 NOS. FOR PLATE SHAFT iv) PLATE HEAD SHOULD HAVE ATLEAST FIVE LOCKING SCREW HOLES AND v) SHAFT SHOULD HAVE
COMBI HOLES . Aiming block should be provided along with appropriate instrumentation
20
-
-
LCP- Posterior medial proximal Tibial Plates 3.5 (Rt and Lt) , Titanium
, 2,4,6,Holes(quote for entire Assembly with screws)
20
-
-
LCP Proximal Lateral Tibia Plates 4.5/5 (Rt and Lt), 5,7,9,11,13 Holes(quote for entireAssembly with screws) (TITANIUM) 1 unit consists of 1 plate and locking screws for all the available holes.
20
-
-
MEDIAL DISTAL FEMUR LOCKING PLATES 3 to 9
holed.(TITANIUM) 1 unit consists of 1 plate and locking screws for all the available holes.
10
-
-
PROXIMAL FEMORAL LOCKING PLATE AND SCREWS (TITANIUM) - RIGHT & LEFT (4 Holes to 12 holes) 1 UNIT CONSISTS OF
I) PLATE-1 No., (left or right)
ii) 6.5'/7 MM & 4.5'/5 MM LOCKING SCREWS - 5 Nos. FOR PLATE HEAD,
iii) 4.5'/5 MM LOCKING CORTICAL SCREWS - at least 5 NOS. FOR PLATE SHAFT
iv) PLATE HEAD SHOULD HAVE ATLEAST FIVE LOCKING SCREW HOLES AND
v) SHAFT SHOULD HAVE COMBI HOLES. Aiming block should be provided along with appropriate instrumentation
20
-
-
PROXIMAL HUMEROUS LOCKING PLATE (TITANIUM) Right &
Left from 4 holes to 10 holes 1 UNIT CONSISTS OF
I) PLATE-1 No.,
II) 3.5/4 MM LOCKING SCREWS- 6 Nos. FOR PLATE HEAD,
III) 3.5/4 MM CORTICAL/Locking SCREWS - 4 NOS. FOR PLATE SHAFT
IV) PLATE HEAD SHOULD HAVE AT LEAST SIX LOCKING SCREW HOLES AND
V) SHAFT SHOULD HAVE COMBI HOLES. Aiming block should be provided along with appropriate instrumentation
20
-
-
PROXIMAL MEDIAL LOCKING TIBIAL PLATE (TITANIUM) right & left ( 4,6,8,10 Holes) 1 UNIT CONSISTS OF
i) PLATE-1 No.,
ii) 3.5/4 MM LOCKING SCREWS- 3 Nos. FOR PLATE HEAD,
iii) 3.5/4 MM CORTICAL/Locking SCREWS - 4 NOS. FOR PLATE SHAFT
iv) PLATE HEAD SHOULD HAVE AT LEAST THREE LOCKING SCREW HOLES AND
v) SHAFT SHOULD HAVE COMBI HOLES .
10
-
-
VIII - CONSUMABLES - SCREWS
-
-
-
6.5/7 mm partially threaded/fully threaded cannulated cancellous Screws
i) Should be made of surgical grade titanium
ii) Screws should be supplied with equal number of compatible washers.
iii) The complete set of necessary instruments required for screw
insertion (including compatible threaded guide wires (10 no’s) should be supplied on loaner basis
iv) Sizes required in increments of 5 mm:
75 mm to 95 mm - 10 each (50), 100 mm to 120 mm - 15 each (75),
125mm to 135 mm - 5 each (15)
140
-
-
SCREWS, 7MM CANNULATED CANCELLOUS, 16MM
THREADED, sizes 40mm to 85mm
150
-
-
SCREWS, 7MM CANNULATED CANCELLOUS, 16MM
THREADED, sizes 110 mm to 140mm
15
-
-
SCREWS, 7MM CANNULATED CANCELLOUS, 32 MM
THREADED, sizes 60mm to 75mm
20
-
-
SCREWS, 7MM CANNULATED CANCELLOUS, FULLY
THREADED, sizes 30mm to 120mm
50
-
-
SCREWS CORTICAL SELF TAPING , 1.5 mm , sizes 10mm to
20mm
40
-
-
SCREWS CORTICAL SELF TAPING , 2mm , sizes 10mm to 20mm
45
-
-
SCREWS, 3.5mm CORTICAL SELF TAPING sizes 12mm to 120mm
500
-
-
SCREWS, 2.4 MM HEADLESS COMPRESSION, sizes 12mm to 30mm (TITANIUM) INSTRUMENTATION SHOULD BE PROVIDED ON LOANER BASIS
25
-
-
washer for cannulated cancellous screws for 6.5mm and 4mm
50
-
-
herbert screws 4.5- 5.5mm sizes (30-70mm)
15
-
-
IX - CONSUMABLES - PLATES
-
-
-
LCP DHS PLATE TITANIUM The implants should be available with long barrel (38mm) and short barrel length of (25mm).
The DHS barrel plate should be available in the following CCD angles: 130°, 135°, 140° 145°and 150°
The DHS barrel plate should be available in 4-6 holes
12.5 MM DHS blade/screw is required in 65-120 mm increments
1 UNIT CONSISTS OF i) DHS blade/screw - 1 nos ii) DHS PLATE - 1 nos iii) 5.0 mm locking screw- 2 nos, 4.5 mm cortex screw- 2 nos
10
-
-
2.7/3.5 MM DISTAL ANTEROMEDIAL TIBIA LCP (TITANIUM ) 4-
10 HOLES. Plate head should have at laest 8 locking holes. 1 unit consists of 1 plate and locking screws for all the available holes.
10
-
-
Variable angle LCP condylar plate for distal femur (plate with screw) (all sizes both sides) TITANIUM 6- 18holes, LCP combi-holes in the shaft. 1 UNIT CONSISTS OF i) plate - 1, ii) 5.0 mm variable angle cannulated locking screws -.5 nos, 5.0 mm variable angle locking screws -.4 nos, The VA Periprosthetic Locking Screws 5.0 mm-3 nos,4.5 cortex screw-4 nos.
The system should have Aiming Arm for Variable angle-LCP Condylar Plate 4.5/5.0 for MIPO technique.
Conical THREADED DRILL SLEEVE to angulate the drill bits in 15- 30 degrees, Torque limiting SCREW DRIVER, AIMING DEVICE for MIPO SHOULD BE PROVIDED ON LOANER BASIS
10
-
-
Variable angle LCP Tibial plate for proximal Tibia (plate with screw) (all sizes both sides) TITANIUM 4 - 14 holes LCP combi-holes in the shaft. 1 UNIT CONSISTS OF i) plate -1, ii) 3.5 mm variable angle locking screws -.7 nos,3.5 cortex screw-3 nos. The system should have Aiming Arm for Variable angle-LCP proximal lateral tibial Plate 3.5 mm for MIPO technique.
Conical THREADED DRILL SLEEVE to angulate the drill bits in 15 degrees, Torque limiting SCREW DRIVER, AIMING DEVICE for MIPO SHOULD BE PROVIDED ON LOANER BASIS
10
-
-
DHS TROCHANTERIC STABILISATION PLATE Used to stabilize
the greater trochanter and lateral wall and it is used as a modular extension of the Dynamic hip screw system. SHOULD BE COMPATIBLE WITH ALL STANDARD DHS
10
-
-
2.4 MM DISTAL RADIUS VARIABLE ANGLE VOLAR LOCKING PLATE TITANIUM UNIT: 1 UNIT CONSISTS OF PLATE-1 No., 2.4 MM VARIABLE ANGLE LOCKING SCREWS-4 Nos. FOR PLATE HEAD, 2.4 MM LOCKING CORTICAL SCREWS
- 3 NOS. FOR PLATE SHAFT
ii) PLATE HEAD SHOULD HAVE ATLEAST EIGHT LOCKING SCREW HOLES AND SHAFT SHOULD HAVE COMBI HOLES (3Holes-12holes)
20
-
-
2.4'/2.7'/3.5 MM PROXIMAL ULNA LOCKING PLATE TITANIUM
i) UNIT: 1 UNIT CONSISTS OF PLATE-1 No., 2.4'/2.7 MM LOCKING SCREWS-4 Nos. FOR PLATE HEAD, 3.5 MM LOCKING CORTICAL SCREWS - 3 NOS. FOR PLATE SHAFT
ii) PLATE HEAD SHOULD HAVE ATLEAST FOUR LOCKING SCREW HOLES AND SHAFT SHOULD HAVE COMBI HOLES. REQUIRED SIZES (3H-5NO, 4H-5NO, 5H-2 NO)
10
-
-
2.4'/3.5 MM LATERAL END CLAVICLE LOCKING PLATE (TITANIUM) Right and left UNIT: 1 UNIT CONSISTS OF PLATE- 1 No., 2.4 MM LOCKING SCREWS-4 Nos. FOR PLATE HEAD, 3.5 MM LOCKING CORTICAL SCREWS - 3 NOS. FOR PLATE SHAFT
ii) PLATE HEAD SHOULD HAVE ATLEAST FIVE LOCKING SCREW HOLES AND SHAFT SHOULD HAVE COMBI HOLES
10
-
-
2.7MM CALCANEAL LOCKING PLATE (TITANIUM) - Right and
left 1 unit consists of 1 plate , 8 locking screws
20
-
-
3.5 MM LATERAL PROXIMAL TIBIAL LOCKING LCP TITANIUM i) UNIT: 1 UNIT CONSISTS OF PLATE-1 No., 3.5'/4 MM LOCKING SCREWS - 5 Nos. FOR PLATE HEAD, 3.5'/4 MM LOCKING CORTICAL SCREWS - 4 NOS. FOR PLATE SHAFT iii)
PLATE HEAD SHOULD HAVE ATLEAST FIVE LOCKING SCREW HOLES AND SHAFT SHOULD HAVE COMBI HOLES
iii) SUPPLIER SHOULD SUPPLY THE COMPLETE SET OF INSTRUMENTS INCLUDING DRILL BIT, TAP, DEPTH GAUGE, THREADED DRILL SLEEVE, SCREW DRIVER, AIMING DEVICE'/GUIDING BLOCK ON LOANER BASIS TILL STOCKS LAST iv)
INVENTORY WITH ALL SCREW SIZES SHOULD BE MAINTAINED IN JIPMER
v) SUPPLIER SHOULD BE READY TO EXCHANGE UNUSED PLATES FOR REQUIRED SIZES
LEFT: 3H-8no, 4H-10no, 6H-12no, 8H-5no,10H-5no RIGHT: 3H-8no, 4H-10no, 6H-12no, 8H-5no, 10H-5no
20
-
-
3.5 mm precontoured acetabular reconstruction plate 6 to 20 holes (right and left) with screws
10
-
-
3.5 T BUTTRESS PLATE 3 to 4 holes
20
-
-
3.5 T oblique plate right & left 3 to 10 holes
50
-
-
DISTAL HUMERUS EXTRA ARTICULAR ANATOMICAL
LOCKING PLATE & screw assembly TITANIUM (i) UNIT: 1 UNIT CONSISTS OF PLATE-1 No., 3.5 MM LOCKING SCREWS-4 Nos. FOR PLATE HEAD, 3.5 MM LOCKING CORTICAL SCREWS - 3 NOS. FOR PLATE SHAFT
(ii) PLATE HEAD SHOULD BE ANATOMICAL TO POSTERIOR CONTOUR OF LATERAL CONDYLE, ATLEAST FIVE LOCKING SCREW HOLES AND SHAFT SHOULD HAVE COMBI HOLES
(iii) SUPPLIER SHOULD SUPPLY THE COMPLETE SET OF INSTRUMENTS INCLUDING DRILL BIT, TAP, DEPTH GAUGE, THREADED DRILL SLEEVE, SCREW DRIVER, AIMING DEVICE'/GUIDING BLOCK ON LOANER BASIS TILL STOCKS LAST
(iv) DISTAL HUMERUS EXTRA ARTICULAR ANATOMICAL LOCKING PLATE LEFT: (4H - 5NO, 5H - 5NO, 6H- 5NO, RIGHT: 4H - 5NO, 5H - 5NO, 6H- 5NO)
20
-
-
Locking Plate with screw construct for fixation of high tibial osteotomy (TITANIUM) - Head should have at least 3 holes (all sizes) 1 unit consists of 1 plate and locking screws for all the available holes.
10
-
-
Mini fragment plates 3 to 5 holes with screws, with screw driver , drill bit
10
-
-
Plate, 3.5MM Pubic symphysis 4 to 6 holes with screws
10
-
-
PLATE, 4.5 DCP, 6 TO 12 HOLES
20
-
-
Plate, low profile reconstruction straight plate 3.5mm for acetabulum 6 to 20 holes with screws
20
-
-
3.5mm quadrilateral plate system for acetabular fracture
10
-
-
3.5mm intrapelvic acetabular system with plate and screws
10
-
-
Proximal radius locking plate with screw construct for radical head (2.4mm)
10
-
-
Proximal radius locking plate with screw construct for radical neck (2.4/2.7mm) TITANIUM 1 unit consists of 1 plate and locking screws for all the available holes.
20
-
-
Spring plates 3.5mm 3 to 4 holes with screws
5
-
-
PFN WITH HELICAL BLADE (TITANIUM)
1. RANGE : Proximal Femoral nails from 9 mm dia to 12 mm dia length 170 mm to 340 mm 2. UNITS: Each Proximal Femoral nail unit consist of (i)
Proximal Femoral nail - 1 No ( 9 mm dia to 12mm dia length 170 mm to 340 mm) (ii) PFN BLADE - 1
No.( 75mm - 120mm )
(iii) 4.9 mm locking bolt x 2
30
-
-
Titanium mount block for wire '/ cable. should be compatible with 4.5mm locking plates. should have 5mm threads
10
-
-
Fumeral Neck System - 1 Unit consisting of Bolt (10mm), Anti-rotation Screw (6.4mm), Locking Screw (5mm), 130 degree one holed plate with instrumentation on lonar basis
10
-
-
Perimeter Calcaneal locking plate Right & Left ( ANATOMICAL) 3.5 mm or 2.7 mm (TITANIUM) 1 unit consists of 1 plate and 8 locking screws.
20
-
-
X - CONSUMABLES - NAILS
-
-
-
TITANIUM ELASTIC NAIL, 2.5 x 44
50
-
-
TITANIUM ELASTIC NAIL, 3 x 44
50
-
-
TITANIUM ELASTIC NAIL, 3.5 x 44
50
-
-
TITANIUM ELASTIC NAIL, 4 x 44
50
-
-
TITANIUM ELASTIC NAIL, 4.5 x 44
50
-
-
Reconstruction femoral nail
1. Should be made of surgical grade stainless steel or titanium
2. Nail should be compatible with antegrade piriform fossa entry
3. Proximal nail should have options for recon bolts, descending trochanteric bolts and lateral to medial standard interlocking bolt (2 each)
4. Distal nail should atleast two locking holes
5. The complete set of instrumentation required for nail and locking bolt insertion should be supplied on loaner basis
6. One nail along with all the requisite bolts will be considered as one unit
7. Sizes required: 9mm x 38, 40, 42 - 4 units each 10mm x 38,40,42
- 8 units each 11mm x 38,40,42 - 8 units each
20
-
-
RETROGRADE FEMORAL NAIL (Left and right) TITANIUM . Each
unit consists of
1 nail (both short/long), spiral blade/ screw-1 nos,
5.0 mm locking screw-3 nos
10
-
-
INTRAMEDULARY NAIL, INTER LOCKING FEMUR (TITANIUM)
1. RANGE : FEMUR interlocking nails from 9 mm dia to 13 mm dia length 32 to 42 mm
2. UNITS: Each linterlocking nail unit consist of
(i) interlocking nail - 1 No
(ii) interlock bolts x 4
80
-
-
Tibial nail for Metaphysial with Diphysial fractures. (TITANIUM
)Proximal part of nail should have 5 locking options, 3 oblique and 2 medio- lateral. Distal part of nail should have 4 locking option in multiple directions (assorted sizes) 1 unit includes 1 nail with 3 proximal screws and 2 distal screws
30
-
-
PFN NAIL LONG - (TITANIUM)
1. RANGE : Proximal Femoral nails from 9 mm dia to 11 mm dia length 300 mm to 440 mm
2. UNITS: Each Proximal Femoral nail unit consist of
(i) Proximal Femoral nail - 1 No ( 9 mm dia to 11 mm dia length 300 mm to 440 mm)
(ii) 8 mm cannulated locking bolt ( 65-110) x 1 6 mm cannulated locking bolt ( 65-110) x 1
4.9 mm locking bolt x 2
60
-
-
INTRAMEDULARY NAIL, INTER LOCKING TIBIA (TITANIUM)
1. RANGE : Tibial interlocking nails from 7 mm dia to 10 mm dia length 28 mm to 34 mm
2. UNITS: Each tibial interlocking nail unit consist of
(i) Tibial interlocking nail - 1 No
(ii) 3.9 '/ 4.9 interlock bolts x 4
80
-
-
TIBIO CALCANEAL (HINDFOOT) FUSION NAIL: TITANIUM
1.RANGE : Nails from 9 mm dia to 13 mm dia length 20 mm to 34 mm
2. UNITS: Each unit consist of
(i) TIBIOCALCANEAL nail - 1 No (9 mm dia to 13 mm dia length 20 mm to 34 mm)
(ii) 5 mm and 6mm locking screws x 5Nos along with ONE 12.5mm Spiral blade (45-100mm)corresponding to the case
5
-
-
Enders nail system with nails 2-5mm in diameter and length 240-400mm
30
-
-
Adolescent nailing system with nails and bolts 8-10mm in diameter and length 240-400mm
10
-
-
Straight Titanium Proximal Humeral Nail - 1 Unit consisting of Nail 1 No., 4.5mm blunt locking screw with suture hole - 3 Nos., 3.5mm Locking Screw - 2 Nos., 4mm Locking Screw - 2 Nos. with instrumentation on lonar basis
5
-
-
XI - CONSUMABLES - MISCELLEANOUS
-
-
-
BONE BIOPSY NEEDLE SET
20
-
-
Saw blades 5mm to 14 mm compatible with CONMED
42
-
-
Burr, Round fluted 6 mm to 12mm
45
-
-
DISPOSABLE DIATHERMY CABLES -MONOPOLAR ADULT
400
-
-
Cement nozzles with Gun on lonar basis
100
-
-
ARTHROSCOPY DRAPE SET (Sterile) (with Foot Cover, sterile drape for camera cable and cling drape).
100
-
-
laminectomy Drapes
200
-
-
Sterile Disposable drapes for 2D C-arm (three pieces) with poly strapes
- long size
500
-
-
THR DRAPE disposable made of material 68-77 gsm spun lace fabric water repellent, length 200cm, width 160cm, consists of headsheet (1x1.5m), adhesive strip (4cmx1.5m), two packets (12x35cm), two tube & cable holder workpad (30x50cm), U-sheet(1.75x1.5m). U-
cut(70x15cm), straight 24 cm round, two absorbent workpad (50x10cms) & Polysheet lining (1x1.25m)
50
-
-
Transparent Drapes with Adhesive edges (size - 65x40cms) betadine coated
300
-
-
WOUND DRESSING STERILE incision size 15x7.5cm
200
-
-
WOUND DRESSING STERILE incision size 20x10cm
200
-
-
WOUND DRESSING STERILE incision size 30x10cm
200
-
-
WOUND DRESSING STERILE IMPERVIOUS SILVER
IMPREGNATED incision size 20X 10 CM
200
-
-
WOUND DRESSING STERILE IMPERVIOUS SILVER
IMPREGNATED STERILE incision size 30X10 CM
200
-
-
Soft Roll Cotton Pad - 7.5 cms
500
-
-
Soft Roll Cotton Pad - 10 cms
500
-
-
Soft Roll Cotton Pad - 15 cms
200
-
-
Corkscrew electrode set spiral needle 0.6 mm with tip cable 1.5 m with
1.5 mm touchproof male connector DIN42802 sterile sets with each 6 electrodes red, green, yellow, blue, black and white, ETO sterilised, packed individually, single use
20
-
-
SDN electrode Trigon GN 20'/1500, stainless steel
1.5 mm touchproof connector,
1 electrode green (Ground), needle length 20 mm, diameter 0.45 mm, cable length 1500 mm,
single use, ETO sterilised
60
-
-
SDN electrodes Trigon 15'/2000, stainless steel
1.5 mm touchproof connector, pair of electrodes red'/black, red'/white, blue'/black, blue'/white, yellow'/black, yellow'/white, violet'/black, violet'/white, grey'/black, grey'/white, needle length 15 mm, diameter
0.45 mm, cable length 2000 mm, single use, ETO sterilised
100
-
-
SDN electrodes Trigon 20'/2000, stainless steel
1.5 mm touchproof connector, pair of electrodes red'/black, red'/white, blue'/black, blue'/white, yellow'/black, yellow'/white, violet'/black, violet'/white, grey'/black, grey'/white, needle length 20 mm, diameter
0.45 mm, cable length 2000 mm, single use, ETO sterilised
100
-
-
Surface adhesive electrode with push-button,
with gel, dimensions: 48 x 38 mm, delivered non-sterile, single use only
100
-
-
Fully Synthetic Beta-tricalcium Phosphate Fully Resorbable granules of average Particle size 2mm - 5cc
10
-
-
Artificial dural graft Non-biological '/ synthetic, biocompatible, implantable . Sewable to normal dura. Should be impervious to fluid. For permanent implant. Should lead to minimal adhesion formation And tissue reaction. Expanded polytetrafluoroethylene (ePTFE) preferred.
25
-
-
10% POVIDINE IODINE 100ML BOTTLES
500
-
-
PULSE LAVAGE
250
-
-
TPS OIL LUBRICANT
20
-
-
Injectable Fully Resorbable Synthetic Bone Graft Substitute Setting Paste of Beta-tricalcium Phosphate and Calcium sulphate in 50:50 ratio and with ZPC in a kit - 5cc
10
-
-
Injectable Fully Resorbable Synthetic Bone Graft Substitute Setting Paste of Beta-tricalcium Phosphate and Calcium sulphate in 50:50 ratio and with ZPC in a dual syrige mixing system - 2.5cc
10
-
-
NEUROSURGERY PATTIES
200
-
-
Synthetic High Purity Implant Grade Calcium Sulphate Pre-formed Pellets of size 3mm and 4.8mm - 5cc
10
-
-
Synthetic Recrystallised Hemihydrate Calcium Sulphate Kit to Prepare Antibiotic Impregnated Resorbable Pellets for delivery of antibiotics locally - 5cc
10
-
-
FIBER GLASS SYNTHETIC PLASTER CAST KIT CONSISTING
OF Soft cotton roll, gloves and fibrecast 7.5mm to 12.5 mm
180
-
-
DISPOSABLE DIATHERMY PATIENT PLATE PAED
50
-
-
DISPOSABLE DIATHERMY PATIENT PLATE ADULT
100
-
-
Stimulation probe 85mm monopolar, straight, ball tip
1.5 mm touchproof connector, straight shaft, ball diameter 2.3mm, working length 85mm, with neutral SDN electrode black, cable length 3000mm, single use, ETO sterilised
10
-
-
Fully Resorbable Synthetic Bone Graft Substitute Mouldable Putty of Beta-tricalcium Phosphate and Calcium sulphate in 50:50 ratio with ZPC - 10cc
10
-
-
RUST REMOVER
50
-
-
GIGLY SAW
50
-
-
DISPOSABLE SUCTION TUBES WITH SUCTION TIP
500
-
-
Nitinol k wire size 1, 1.5, 1.8 & 2mm
20
-
-
Radiofrequency ablator single and multiple prongs- 15 in each (compatible with serfas)
10
-
-
Fibrin Sealant'/Glue for use in ortho-surgery to prevent CSF leak based on fibrin coagulum formed on mixing fibrinogen and thrombin components in easy to apply chamber and nozzle system. Dual tip syringe system and vials with sterile water for reconstitution should be part of the package. Total quantity should be at least 1 ml after generation of fibrin. Warming and stirring device should be made available in OT or on demand within 24 hours. Components, if derived from pooled or single donor human blood should be free from all known pathogens. (Any agitating device required to mix the glue should
be provided during use and kept in Ortho OT)
100
-
-
Stapler remover - Stainless Steel - Reusable
25
-
-
Acepto syringe
10
-
-
Hemostatic Dressing for external application , 4 ply non-woven gauze, Size 4x4 inches, impregnated with a natural inorganic mineral with X- ray detectable strip.
100
-
-
Soft roll for CTEV clinic 6inches
500
-
-
Patient pre-operative skin preparation Solution 10.5 ml in sterile applicator container for single use with 2% CHG and 70% IPA.
100
-
-
STERILE SURGICAL TOURNIQUET ( All in one exsanguination sterile tourniquet) - sizes 14 - 85cms (small, medium, large, extra large)
3
-
-
XII - NON CONSUMABLE - GENERAL INSTRUMENTS
-
-
-
Lead apron normal - consists of frontal overlap, velcro panels, adjustable elastic belt for reduced back & shoulder stress & side slits.
10
-
-
Lead apron zero lead - consists of frontal overlap, velcro panels, adjustable elastic belt for reduced back & shoulder stress & side slits.
5
-
-
A reusable suture cutter open ended with 4.2mm shaft diameter left opening and total length of 13cm for arthroscopic suture cutting
1
-
-
A Knot pusher closed end with modified blue handle in order provide ergonomic feel and distal edges should be smooth to avoid suture cutting in rotator cuff repair
1
-
-
A metal reusable instrument with 3.4 mm shaft diameter straight shaft and approximately 16cm in length for arthroscopic suture retrieval
1
-
-
Arthroscopic Hook scissors 20 -30 degree left
1
-
-
Arthroscopic Hook scissors 20- 30 degree right
1
-
-
Arthroscopic Hook scissors straight
1
-
-
Arthroscopic Knee Curettes with handle:
-
-
-
Curette, small, oval, curved 10 degree upwards, working length more than 12cm
1
-
-
Curette, medium, oval, curved 10 degree upwards, working length more than 12cm
1
-
-
Curette, large, oval, curved 10 degree upwards, working length more than 12cm
1
-
-
Bending tool
1
-
-
Cannula to access posterior horn
1
-
-
Double lumen cannula curved left
1
-
-
Double lumen cannula curved right
1
-
-
Double lumen cannula curved up left
1
-
-
Double lumen cannula curved up right
1
-
-
Double lumen cannula straight
1
-
-
Metal mallet with plastic head , length 22.5cm
1
-
-
Notch chisel with handle curved 15 degrees downwards , working length more than 12 cm , round tip, with markings for depth measurement
2
-
-
Osteotome. Thin, flat tip, 10mm width for harvesting bone patella tendon graft
2
-
-
Osteotome. Thin, flat tip, 8mm width for harvesting bone patella tendon graft
1
-
-
Rasp , narrow, curved, working length more than 12 cm
1
-
-
Rasp , narrow, straight, working length more than12 cm
1
-
-
Reusable inside out meniscal repair set
2
-
-
PLATE BENDER
10
-
-
Ilizarov wire cutter
2
-
-
KWIRE CUTTERS
2
-
-
ROD CUTTERS
2
-
-
WIRE CUTTER CUM BENDER
5
-
-
METAL BONE BIOPSY NEEDLE SET - OUTER SLEEVE CANNULATED 5 MM
2
-
-
CEMENT MIXING BOWL WITH SPATULA
2
-
-
Centrifuge for PRP and BMA concentrate, table top automated with brushless induction motor 6000 RPM, weight 5 kg with 24 tubes of 15 ml
1
-
-
HOKE CHISEL
2
-
-
Debakey bull dog clamps vascular size - 25, 30, 45mm
6
-
-
DIETHRICH DEBAKEY CROSS ACTION BULLDOG CLAMP ANGLED 50°, JAW 10MM AND 52MM TOTAL LENGTH WITH STANDARD PRESSURE OF 80 GRAMS
6
-
-
DIETHRICH DEBAKEY CROSS ACTION BULLDOG CLAMP ANGLED 50°, JAW 14MM AND 54MM TOTAL LENGTH WITH STANDARD PRESSURE OF 80 GRAMS
6
-
-
DIETHRICH DEBAKEY CROSS ACTION BULLDOG CLAMP STRAIGHT, JAW 12MM AND 53MM TOTAL LENGTH WITH STANDARD PRESSURE OF 80 GRAMS
6
-
-
DIETHRICH DEBAKEY CROSS ACTION BULLDOG CLAMP STRAIGHT, JAW 15MM AND 56MM TOTAL LENGTH WITH STANDARD PRESSURE OF 80 GRAMS
6
-
-
Multifunctional A3 copier'/printer, duplex, LAN, RADF, Scan to folder, 20CPM
1
-
-
Cuff arm for tourniquet compatible with VBM m/c size - adult
2
-
-
Cuff thigh for tourniquet compatible with VBM m/c size - adult
4
-
-
Cuff tourniquet compatible with VBM m/c size - paed
2
-
-
VOLKMAN CURETTE 220 MM (SIZE 3 MM) OVAL CUP - SHARP EDGED
6
-
-
Volkmans curettee backward angled 2" to 4"
4
-
-
Volkmans curettee forward angled 2" to 4"
4
-
-
SUPERFINE VESSEL DILATOR 13,5CM, STRAIGHT FLAT HANDLE 9MM, TIPS 4X0,3MM. MUST HAVE A HIGHLY POLISHED AREA IN THE WORKING SURFACE TO AVOID INTERLUMINAL INJURY IN THE VESSEL
2
-
-
ELEVATOR DISECTOR DOUBLE ENDED
6
-
-
FINE DISECTOR REINFIELD
6
-
-
FREER DOUBLE ENDED DISSECTOR, WITH SHARP AND BLUNT ENDS 190MM
6
-
-
KILLIAN DOUBLE ENDED DISSECTOR WITH SHARP AND BLUNT ENDS 180MM
4
-
-
McDONALD DOUBLE ENDED DISSECTOR, 190MM
6
-
-
MICRO DISSECTOR FLAT''/CURVED
6
-
-
Penfield Dura Dissector, Double Ended, curved, 290mm
6
-
-
Penfield Dura Dissector, Double Ended, One side Wax Packer and one side Dissector curved, 190mm
6
-
-
Tungsten Carbide Metzenbaum-Aquila-Fino Dissect.Sc curved, bl''/ round, TC, SC, golden scres 18cm
2
-
-
Tungsten Carbide Metzenbaum-Delicate Dissect.Scis.18cm curved, bl''/bl, black
2
-
-
Tungsten Carbide Metzenbaum-Delicate Dissect.Scis.20cm curved, bl''/bl, black
2
-
-
Tungsten Carbide Metzenbaum-Delicate Dissect.Scis.25cm curved, bl''/bl, black
2
-
-
Tungsten Carbide Metzenbaum-Delicate Dissect.Scis.28cm curved, bl''/bl, black
2
-
-
Tungsten Carbide Metzenbaum-Dissec.18cm,cvd., black coated
2
-
-
Tungsten Carbide Metzenbaum-Dissec.20cm,cvd., black coated
2
-
-
Tungsten Carbide Metzenbaum-Dissec.23cm,cvd., black coated
2
-
-
Tungsten Carbide Metzenbaum-Dissect.Scis.20cm,cvd. Titan Nitrite coated-copper
2
-
-
Tungsten Carbide Metzenbaum-Dissect.Scis.23cm,cvd. Titan Nitrite coated-copper
2
-
-
Tungsten Carbide Metzenbaum-Dissect.Scis.23cm,str. black coated, golden rings
2
-
-
Tungsten Carbide Metzenbaum-Dissect.Scis.26cm,cvd. black coated
2
-
-
Tungsten Carbide Metzenbaum-Dissect.Scis.26cm,str. black coated
2
-
-
Tungsten Carbide Metzenbaum-Dissect.Scis.30cm,cvd. Titan Nitrite coated-copper
2
-
-
Tungsten Carbide Metzenbaum-Dissect.Scis.30cm,str. black coated
2
-
-
Tungsten Carbide Metzenbaum-Dissecting.Scissors
2
-
-
WATSON-CHEYNE DOUBLE END DISSECTOR, 13CM
2
-
-
Hinterman K-wire distractor / retractor - small, large
4
-
-
Hand held doppler machine portable with pointed 8mhz prob for bedside evaluation of blood flow status
2
-
-
Battery operated Power drill (with batteries - 2 Nos + Charger-1 No)
2
-
-
HAND DRILL JACOB CHUCK WITH KEY
5
-
-
LONG CANNULATED SCREW DRIVER
10
-
-
SCREW DRIVERS 3.5 MM : LENGTH 200 MM NON CANNULATED
2
-
-
SCREW DRIVERS 3.5 MM : LENGTH 250 MM NON CANNULATED
2
-
-
SCREW DRIVERS 4.5 MM : LENGTH 250 MM NON CANNULATED
2
-
-
Cobbs spinal elevator straight & angled
4
-
-
PERIOSTEAL ELEVATOR
5
-
-
Bone file s/s compatible with power reamer attachment
2
-
-
FIBRE OPTIC CABLE WITH ADOPTER LENGTH 8.5 FEET OR 260cm(COMPATIBLE WITH KARL STORZ LIGHT SOURCE)
2
-
-
8" FERRIS SMITH FORCEPS
2
-
-
ALLIES TISSUE FORCEPS 150MM
2
-
-
DEBAKEY DISSECTING FORCEPS WITH TUNGSTEN CARBIDE TIP, ROUND HANDLE, MUST BE USEFUL FOR NEEDLE PULLING OF 5 '0' AND 6 '0' SUTURE NEEDLES. 15CM LENGTH AND 2MM JAW.
2
-
-
DISSECTING FORCEPS TOOTHED CROSS SERRATED BOSS 2X3 TEETH 5"
10
-
-
DISSECTING FORCEPS TOOTHED CROSS SERRATED BOSS 2X3 TEETH 7"
10
-
-
DISSECTING FORCEPS TOOTHED CROSS SERRATED BOSS 2X3 TEETH 8"
10
-
-
Forceps MOSQUITO CURVED ARTERIES CURVED SERRATED JAW 5"
10
-
-
Forceps SPENCERWELL CD ARTERIES
2
-
-
HUDSON NONTOOTHED forceps
2
-
-
HUDSON TOOTHED FORCEPS 170MM
20
-
-
LEKSELL Rongeur
2
-
-
MICRO-NECRO FORCEPS WITH DEBAKEY AUTRAMATIC JAW, ROUND HANDLE, 15CM TOTAL LANGTH AND 1.2MM JAW.
2
-
-
RHOTON MICRO-FORCEPS 15CM/Ø8MM HANDLE, WITH TYING PLATFORM 6X0.7MM, STRAIGHT JAW WITH DIAMOND DUST
2
-
-
RHOTON MICRO-FORCEPS 15CM/Ø8MM HANDLE, DIAMAND COATED RING JAWS 2X1MM,WITH GUIDE PIN
2
-
-
RHOTON MICRO-FORCEPS 15CM/Ø8MM HANDLE, DIAMAND DUST RING JAWS 1X.5MM,WITH GUIDE PIN
2
-
-
Ruskin-Liston Bone Cutting Forceps, Length 18cm, Straight, Ceramic Black Coated - Bite size 3, 4, 5 ,6 mm
4
-
-
Ruskin-Liston Bone Cutting Forceps, Length 18cm, Curved, Ceramic Black Coated - Bite size 3, 4, 5 ,6 mm
4
-
-
SILVER NON-STICK bipolar forceps with European Style Flat Pin Width of tips sizes from 0.3mm to 2.0mm, length 150mm to 220mm
4
-
-
SILVER NON-STICK bipolar forceps with European Style Flat Pin with Round Handle with Golf Ball Finish Width of tips from 0.3mm to 2.0mm, length 150mm to 220mm
4
-
-
Standard Dissection forceps - Plain tip, 2mm tip - 110 to 130 mm long
2
-
-
Standard Dissection forceps - Plain tip, 3mm tip - 140 to 160 mm long
2
-
-
Standard Dissection forceps - Plain tip, 4mm tip - 180 mm long
2
-
-
Standard Dissection forceps - Plain tip, 4mm tip - 230 mm long
2
-
-
Standard Dissection forceps - Plain tip, 4mm tip - 305 mm long
2
-
-
Standard Dissection forceps - toothed tip, 3 mm tip - 230 mm long
2
-
-
Standard Dissection forceps - toothed tip, 4mm tip - 305 mm long
2
-
-
Standard Dissection forceps - toothed tip, 2.5 mm tip - 140 to 160 mm long
2
-
-
Standard Dissection forceps - toothed tip, 2mm tip - 110 to 130 mm long
2
-
-
Standard Dissection forceps - toothed tip, 3 mm tip - 205 mm long
2
-
-
TILLY'S FORCEPS
2
-
-
DEPTH GAUGE Big 3.5 MM , LENGTH 250
2
-
-
DEPTH GAUGE Medium 3.5 MM , LENGTH 200
2
-
-
DEPTH GAUGE Medium 4.5 MM , LENGTH 200
2
-
-
DEPTH GAUGE Small 3.5 MM , LENGTH 150
2
-
-
DEPTH GAUGE Small 4.5 MM , LENGTH 150
2
-
-
BONE GRAFT PUNCHES LARGE 254 MM, HEAD DIA 12X18MM STRAIGHT & ANGLED
10
-
-
BONE GRAFT PUNCHES SMALL 254 MM, HEAD DIA 9X15MM STRAIGHT & ANGLED
10
-
-
Guide wire aiming and repositioning device 1.should allow 5 degree angulation and 5 mm offset insertion
2. Should accommodate guide wires upto 3.2 mm
2
-
-
SPRING HANDLE MICRO SCISSOR CURVED JAW, TOTAL LENGTH 14,5CM,ROUND HANDLE
2
-
-
SPRING HANDLE MICRO SCISSOR STRAIGHT JAW, TOTAL LENGTH 14,5CM,ROUND HANDLE
2
-
-
T handle for shanz pin insertion with Jacob chuck 140 mm, chuck key
2
-
-
CURVED NEEDLE HOLDER LARGE
2
-
-
DeBakey Needle Holder - Tungsten cardbide tip - with straight jaws for suture size 5-0 Ring handle, - with ratchet 240-250 mm long
2
-
-
DeBakey Needle Holder - Tungsten cardbide tip - with straight jaws for suture size 2-0, 3-0 & 4-0 Ring handle, - with ratchet 150-180 mm long
2
-
-
DeBakey Needle Holder Tungsten cardbide Tip - with straight jaws for suture size 2-0, 3-0 & 4-0 Ring handle, - with ratchet 200-220 mm long
2
-
-
Hegar vascular needle holder - with Tungsten cardbide edges - 1 mm wide Ring handle, - with ratchet (Size 1: 140 mm long)
2
-
-
Hegar vascular needle holder - with Tungsten cardbide edges - 1 mm wide Ring handle, - with ratchet (Size 2: 185 mm long)
2
-
-
Hegar vascular needle holder - with Tungsten cardbide edges - 1 mm wide Ring handle, - with ratchet (Size 3: 205 mm long)
2
-
-
Hegar vascular needle holder - with Tungsten cardbide edges - 1 mm wide Ring handle, - with ratchet (Size 4: 230 mm long)
2
-
-
MAYO NEEDLE HOLDER STRAIGHT WIDE CROSS SERRATED JAWS 7"
2
-
-
MICRO-NEEDLE HOLDER ROUND HANDLE, WITH RATCHET, TOTAL LENGTH 15CM, HANDLE Ø8MM, STRAIGHT JAW , JAWS 11X1.5MM, DIAMOND DUST JAWS, STREAMLINED. SHOULD ACCOMMODATE 6'0' SUTURE NEEDLE.
2
-
-
MICRO-NEEDLE HOLDER ROUND HANDLE, WITH RATCHET, TOTAL LENGTH 15CM, HANDLE Ø8MM, STRAIGHT JAW , JAWS 11X2MM, DIAMOND DUST JAWS, STREAMLINED. SHOULD ACCOMMODATE 5'0' SUTURE NEEDLE.
2
-
-
STRAIGHT NEEDLE HOLDER SMALL, MED, LARGE
2
-
-
Tungsten Carbide Crile-Wood Needle Holder 15cm
2
-
-
Tungsten Carbide Crile-Wood Needle Holder 15cm black coated
2
-
-
Tungsten Carbide Crile-Wood Needle Holder 18cm
2
-
-
Tungsten Carbide Crile-Wood Needle Holder 20cm
2
-
-
Tungsten Carbide Crile-Wood Needle Holder 22cm
2
-
-
Tungsten Carbide Crile-Wood Needle Holder 23cm
2
-
-
Tungsten Carbide Mayo-Hegar Needle Holder 14cm
2
-
-
Tungsten Carbide Mayo-Hegar Needle Holder 16cm
2
-
-
Tungsten Carbide Mayo-Hegar Needle Holder 18cm
2
-
-
Tungsten Carbide Mayo-Hegar Needle Holder 18cm black coated
2
-
-
Tungsten Carbide Mayo-Hegar Needle Holder 20cm
2
-
-
Tungsten Carbide Mayo-Hegar Needle Holder 24cm
2
-
-
Tungsten Carbide Mayo-Hegar Needle Holder 26cm
2
-
-
Tungsten Carbide Micro-Vascular Needle Holder 14cm
2
-
-
Tungsten Carbide Micro-Vascular Needle Holder 18cm
2
-
-
Tungsten Carbide Micro-Vascular Needle Holder 20cm
2
-
-
Tungsten Carbide Micro-Vascular Needle Holder 23cm
2
-
-
Tungsten Carbide Micro-Vascular Needle Holder 26cm
2
-
-
BONE HOOK small, med, big
2
-
-
Love Nerve hook ball tip
2
-
-
Love nerve hook blunt
2
-
-
FEMORAL HEAD IMPACTOR nylon faced
2
-
-
Graft Impactor offset foot 30 degree 4 x 12 mm
2
-
-
Beyers bone Nibbler 7" long
2
-
-
Ruskin mini curved bone nibbler 6" long
2
-
-
Nitinol wire
50
-
-
Detachable handle compatible for Fine osteotome thin slender stem.
2
-
-
CURVED OSTEOTOME FOR ACETABULUM
2
-
-
HIBBS OSTEOTOMES THIN SOLID FORGED 203 MM - 10 MM WIDE STR & CVD
10
-
-
HIBBS OSTEOTOMES THIN SOLID FORGED 203 MM - 15 MM WIDE STR & CVD
10
-
-
HIBBS OSTEOTOMES THIN SOLID FORGED 203 MM - 20 MM WIDE STR & CVD
10
-
-
HIBBS OSTEOTOMES THIN SOLID FORGED 203 MM - 5 MM WIDE STR & CVD
10
-
-
L Osteotomes for spinal osteotomies
5
-
-
Femoral head template 42-58mm (Increment of 2 mm)
9
-
-
Radiolucent pelvic retractor, medium - length 268 mm & large - length 323 mm
1
-
-
WIRE PASSER
2
-
-
Beath pin drill tip
5
-
-
Beath pin spade tip
5
-
-
PLIER FLAT NOSE
2
-
-
PLIERS HEAVY DUTY
2
-
-
PLIERS WITH SIDE CUTTERS FOR WIRE UPTO 2.5 MM CHROMIUM PLATED
5
-
-
Ball tipped Love nerve root probe 1.5 x 4mm tip , 200 mm length
5
-
-
Ball tipped Love nerve root probe 1.5 x 3mm tip , 200 mm length
5
-
-
Foraminotomy Punch, down curved shaft, small handle, 20cm, 2mm bite
2
-
-
Foraminotomy Punch, down curved shaft, small handle, 20cm, 3mm bite
2
-
-
Foraminotomy Punch, up curved shaft, small handle, 20cm, 2mm bite
2
-
-
Foraminotomy Punch, up curved shaft, small handle, 20cm, 3mm bite
2
-
-
Kerrison punch down cutting 2 to 3 mm 45 deg
4
-
-
Kerrison punch down cutting 2 to 3 mm 90 deg
4
-
-
Kerrison punch up cutting 1mm to 4mm
10
-
-
Handle for Rotatable Kerrison Bone punch (Billy or similar) assembly (SS matte finish)
3
-
-
Handle for Rotatable Kerrison Bone punch (Billy or similar) assembly (Black coated)
2
-
-
2 MM - Cutting Tip for Rotatable Kerrison Bone punch (Billy or similar) assembly (SS matte finish), Tube -Shaft 20cm, 130 degree with ejector
2
-
-
3 MM - Cutting Tip for Rotatable Kerrison Bone punch (Billy or similar) assembly (SS matte finish), Tube -Shaft 20cm, 130 degree with ejector
2
-
-
4 MM - Cutting Tip for Rotatable Kerrison Bone punch (Billy or similar) assembly (SS matte finish), Tube -Shaft 20cm, 130 degree with ejector
2
-
-
5 MM - Cutting Tip for Rotatable Kerrison Bone punch (Billy or similar) assembly (SS matte finish), Tube -Shaft 20cm, 130 degree with ejector
2
-
-
2 MM - Cutting Tip for Rotatable Kerrison Bone punch (Billy or similar) assembly Black coated) Tube -Shaft 20cm, 130 degree with ejector
2
-
-
3 MM - Cutting Tip for Rotatable Kerrison Bone punch (Billy or similar) assembly Black coated) Tube -Shaft 20cm, 130 degree with ejector
2
-
-
4 MM - Cutting Tip for Rotatable Kerrison Bone punch (Billy or similar) assembly Black coated) Tube -Shaft 20cm, 130 degree with ejector
2
-
-
5 MM - Cutting Tip for Rotatable Kerrison Bone punch (Billy or similar) assembly Black coated) Tube -Shaft 20cm, 130 degree with ejector
2
-
-
DEPTH GAUGE Big 4.5 MM , LENGTH 250
2
-
-
BOX WRENCH FOR BOLT
10
-
-
BOX WRENCH FOR NUT
10
-
-
4 PRONG RETRACTORS
2
-
-
ACROMIAL RETRACTOR MEDIUM
2
-
-
ACROMIAL RETRACTOR SMALL
2
-
-
ANTERIOR CAPSULAR RETRACTOR
2
-
-
ANTERIOR GLENOID NECK RETRACTOR
2
-
-
BLUNT POINT GELPI RETRACTOR
2
-
-
CHARNLEY INITIAL INCISION RETRACTOR : 308 MM WITH BALL, HOOK AND CHAIN
2
-
-
DELTOID RETRACTOR
2
-
-
DELTOID RETRACTOR LARGE
2
-
-
DELTOID RETRACTORS SMALL
2
-
-
FINE SUCTION NOZZLES FRAZIER RETRACTOR
10
-
-
FINE SUCTION NOZZLES MCGUCKINS RETRACTOR
10
-
-
Gelpi-De Bakey Retractor 15cm
4
-
-
Gelpi-Loktite Retractor 18cm
4
-
-
Gelpi-Seletz Retractor 15cm
4
-
-
Gerdar subacromian retractor
2
-
-
HAND HELD DELTOID RETRACTOR
2
-
-
HIGS RETRACTOR
2
-
-
HINGED GELPI RETRACTOR
2
-
-
HOHMANN RETRACTOR 10 MM WIDTH, SMALL, SHORT NARROW TIP 220 MM LENGTH
4
-
-
HOHMANN RETRACTOR 6 MM WIDTH, SMALL, SHORT NARROW TIP 160 MM LENGTH
4
-
-
HOHMANN RETRACTOR 8 MM WIDTH, SMALL, SHORT NARROW TIP 160 MM LENGTH
4
-
-
HUMERAL HEAD RETRACTORS
2
-
-
Jackson-Burrows Retractor 18cm,blunt
2
-
-
Kolbel self retaining glenoid retractor with cutter blade set
2
-
-
LANGENBECK RETRACTOR LARGE STRAIGHT
2
-
-
LANGENBECK RETRACTOR MEDIUM
2
-
-
MITCHELL RUGINE RETRACTOR FAN SHAPED STRAIGHT SHARP EDGE 210 MM
2
-
-
MODIFIED FUKUDA RETRACTOR LARGE
2
-
-
MODIFIED FUKUDA RETRACTOR SMALL
2
-
-
NERVE ROOT RETRACTOR
2
-
-
PECTORAL RETRACTOR LARGE
2
-
-
PECTORAL RETRACTOR SMALL
2
-
-
Rang retractors - set of 2 for sciatic notch
1
-
-
RICHARDSON'S RETRACTOR
2
-
-
SCOFIELD RETRACTOR
2
-
-
SELF RETAINING RETRACTOR FRAME (SHOULDER)
2
-
-
WEITLANDER RETRACTOR
2
-
-
Bone Nibbler''/Rongeur docuble action fine straight & angled length 190 mm
5
-
-
Bone Nibbler''/Rongeur docuble action fine straight & angled length 250 mm
5
-
-
Bone Nibbler''/Rongeur docuble action forward angled length 250 mm
5
-
-
Bone Nibbler''/Rongeur docuble action straight & angled length 190 mm
5
-
-
Bone Nibbler''/Rongeur docuble action straight & angled length 250 mm
5
-
-
Disc Rongeurs (Pitutary disc forceps) angled sizes 1mm to 4mm
10
-
-
Disc Rongeurs (Pitutary disc forceps) straight sizes 1mm to 4mm
10
-
-
Echlin Bone Rongeur Forcep 23cm''/2mm to 4mm,straight
2
-
-
Gruenwald (Cushing) Rongeur 18cm''/2, 3, 4 x10mm, curved down, detachable
2
-
-
Gruenwald (Cushing) Rongeur 18cm''/2, 3, 4 x10mm, curved up, detachable
2
-
-
Gruenwald (Cushing) Rongeur 18cm''/2, 3, 4 x10mm, straight, detachable
2
-
-
Ruskin Bone Rongeur Forcep, Double Action 18cm Length''/Bite Size 4mm to 5mm, Straight,Ceramic Black Coated
2
-
-
Battery operated Power saw (with batteries - 2 Nos + Charger-1 No)
2
-
-
MEASURING SCALE - 15 cm
5
-
-
MEASURING SCALE - 30 cm
5
-
-
KILNER SCISSORS 5" STRAIGHT & CURVED
8
-
-
Mayo Scissors - with tungsten carbide edges - Curved, Large 230 mm long
2
-
-
Mayo Scissors - with tungsten carbide edges - Curved, Medium 170 mm long
2
-
-
Mayo Scissors - with tungsten carbide edges - Curved, Small 145mm long
2
-
-
Mayo Scissors - with tungsten carbide edges - Straight, Large 230 mm long
2
-
-
Mayo Scissors - with tungsten carbide edges - Straight, Medium 170 mm long
2
-
-
Mayo Scissors - with tungsten carbide edges - Straight, Small 145mm long
2
-
-
Metzenbaum Scissors - with tungsten carbide edges - Lazy S Curved, 205 mm long
2
-
-
Metzenbaum Scissors - with tungsten carbide edges - Lazy S Curved, 230 mm long
2
-
-
Metzenbaum Scissors - with tungsten carbide edges - Curved, 115mm long
6
-
-
Metzenbaum Scissors - with tungsten carbide edges - Curved, 145 mm long
6
-
-
Metzenbaum Scissors - with tungsten carbide edges - Curved, 180 mm long
6
-
-
Metzenbaum Scissors - with tungsten carbide edges - Curved, 205 mm long
6
-
-
Metzenbaum Scissors - with tungsten carbide edges - Curved, 230 mm long
2
-
-
Metzenbaum Scissors - with tungsten carbide edges - Curved, 260 mm long
2
-
-
Metzenbaum Scissors - with tungsten carbide edges - Curved, 285 mm long
2
-
-
Metzenbaum Scissors - with tungsten carbide edges - Curved, 300 mm long
2
-
-
Metzenbaum Scissors - with tungsten carbide edges - Lazy S Curved, 180 mm long
2
-
-
Metzenbaum Scissors - with tungsten carbide edges - Straight, 300 mm long
2
-
-
Metzenbaum Scissors - with tungsten carbide edges - Straight, 115mm long
2
-
-
Metzenbaum Scissors - with tungsten carbide edges - Straight, 145 mm long
2
-
-
Metzenbaum Scissors - with tungsten carbide edges - Straight, 180 mm long
2
-
-
Metzenbaum Scissors - with tungsten carbide edges - Straight, 205 mm long
2
-
-
Metzenbaum Scissors - with tungsten carbide edges - Straight, 230 mm long
2
-
-
Metzenbaum Scissors - with tungsten carbide edges - Straight, 260 mm long
2
-
-
Metzenbaum Scissors - with tungsten carbide edges - Straight, 285 mm long
2
-
-
PLASTER CUTTING SCISSORS
2
-
-
SCISSORS FOR CUTTING POLY PROPLENE SUTURE MATERIAL AND 1'0' SUTUREMATERIAL - ONE SIDE OF THE BLADE WITH SERRATION AND ANOTHER SIDE WITH TUNGESTEN CARBIDE TIP - AVAILABLE LENGTHS: 6", 7", 8"
6
-
-
SCISSORS METZENBAUM 5" STRAIGHT & CURVED
8
-
-
SCISSORS METZENBAUM 7" STRAIGHT & CURVED
8
-
-
Tungsten Carbide Mayo Scissor 17cm, straight, black coated, golden handles
2
-
-
Tungsten Carbide Mayo-Stille Scissor 17cm,curved Titan Nitrite coated-copper
2
-
-
Charnley scoop long small & medium
4
-
-
SCOOP DOUBLE ENDED FINE
6
-
-
Continuous Band sealer machine for packing Instruments and Implants for Plasma sterilization
1
-
-
HOEN DURA SEPARATOR 15CM/45°
2
-
-
HOEN DURA SEPARATOR 15CM/90°
2
-
-
Subscapuler's spreader
2
-
-
Tendon stripper with rotating blade for iliotibial tract
4
-
-
Suction appratus mobile with disposable/bio-degradable consumable sealed containers
1
-
-
YANKAUER SUCTION NOZZLE
10
-
-
WIRE TENSIONER (TBW)
2
-
-
WIRE TENSIONER DIRECT MEASURE
2
-
-
Fukushima Suction Tube conical WL 115mm''/ Fr.6 to 8, flexible
3
-
-
GUIDE WIRE 2MMX40
30
-
-
GUIDEWIRE 2.5MMX40
30
-
-
SS WIRE CUTTERS
4
-
-
COMBINATION WRENCH 10,11
25
-
-
Triangle support knee positioning large & standard
3
-
-
XIII - Special quantity items - PAEDIATRIC IMPLANTS
-
-
-
Micrometric swivelling clamp, OF-Garches, T-clamp, Multiplanar clamp compatible with Paediatric limb reconstruction system (LRS)
5
-
-
Mini-rail lengthener with articulation for short(upto 32.5mm), standard(upto 57.5mm) & long(upto 135.5mm)
5
-
-
Mini-rail lengthener without articulation for short(upto 32.5mm), standard(upto 57.5mm) & long(upto 135.5mm)
5
-
-
Bone screw - with taper thread design, self tapping design - length 150 - 260mm; thread length 30 - 90mm; 6mm shaft diameter
5
-
-
XIV - NON-CONSUMABLES
-
-
-
BITE SIZES : 2 TO 5 (upcutting and down cutting detachable tips, 40degrees and 90 degrees)
2
-
-
Fine osteotome thin slender stem, sizes - 2 to 10mm compatible with detachable handle
2
-
-
Chisel Blades with handle
width 10 mm, short, width 10 mm, long, width 16 mm, short, width 16 mm, long, width 25 mm, short, width 25 mm, long, width 5 mm, short, width 5 mm, long
1
-
-
Curved Chisel Blades with handle
width 10 mm, width 16 mm, width 25 mm
1
-
-
Pelvic osteotomes - Straight, angled, short angled bayonet shaped, flag shaped (15 & 20mm width)
1
-
-
Pelvic osteotomy chisel, curved length 304/134 mm, width 15 & 20mm
1
-
-
Pelvic osteotomy chisel, curved length 309 mm, width 15 & 20mm
1
-
-
Radiolucent hohman retractors
width 8 mm, length 220 mm, width 22 mm, length 250 mm, width
35 mm, length 275 mm, width 18 mm, length 240 mm, width 24 mm, length 267 mm
1
-
-
Radiolucent pelvic retractor (260 mm & 320mm length)
1
-
-
CANNULATED REAMERS SET WITH T-HANDLE sizes : 6mm to
13mm
2
-
-
Army - Navy retractor - set of 2 Right angled , 8 1/2 inch
1
-
-
Shoulder positioning (Traction) assembly for shoulder surgery (Lateral decubitus & Beach Chair position)
1
-
-
Arthroscopic Probe
2
-
-
Arthroscopic resector cutters 3.5mm compatible with stryker shaver instrumentation
2
-
-
Arthroscopic resector cutters 5mm compatible with stryker shaver instrumentation
2
-
-
Arthroscopic aggressive plus cutters 3.5 mm compatible with stryker shaver instrumentation
2
-
-
Arthroscopic aggressive plus cutters 5 mm compatible with stryker shaver instrumentation
2
-
-
Arthroscopic tomcat cutters 3.5mm compatible with stryker shaver instrumentation
2
-
-
Arthroscopic tomcat cutters 5 mm compatible with stryker shaver instrumentation
2
-
-
Arthroscopic standard 12 flute Round Burr compatible with stryker shaver system
2
-
-
Arthroscopic standard 6 flute Round Burr compatible with stryker shaver system
2
-
-
Homann retractor - assorted sizes
30
-
-
Osteotomes (Unibody design) - straight and curved - assorted sizes
30
-
-
Biodegradable Calcium sufate granules (Powder and liquid) for antibiotic delivery - 5 cc
10
-
-
Biodegradable Calcium sufate granules (Powder and liquid) for antibiotic delivery - 10 cc
10
-
-
Stockinette - Cotton - 100mm (10 Meters roll)
10
-
-
Stockinette - Cotton - 200mm (10 Meters roll)
10
-
-
Continuous Band Sealing Machine
2
-
-
XV - MISCELLANEOUS - PLATES, FOOT & ANKLE IMPLANTS
-
-
-
2.4/2.7 mm linear small metatarsal LCP 4- 8 holed
10
-
-
2.4/2.7 mm metatarsal L oblique LCP 2-6 holed right and left
10
-
-
2.4/2.7 mm rhomboid shaped cuboid LCP right and left
10
-
-
2.4/2.7 mm curvilinear talus LCP 6 holed
10
-
-
2.4/2.7 mm curvilinear LCP with multiple central flanges for naviculum 7 holed
10
-
-
2.4/2.7 mm Y shaped Metatarsal LCP 3-7 holed
10
-
-
hindfoot ankle arthrodesis Straight nail with 3 distal locking for calcaneum (3.9/4.9 mm 2 lateral to medial and 1 posterior to anterior) and 3 proximal locking options ( with one dynamic locking )
10
-
-
3.5 mm Rhomboid plate for lisfranc arthrodesis /TN arthrodesis
10
-
-
3.5 mm calcaneal perimeter plate with locking scew holes along the perimeter of calcaneum and two connecting bars between superior and inferior perimeters
10
-
-
2, 2.5mm T Plate, L Plate and Straight Plates for talus neck fixation
10
-
-
2.4/2.7mm Radial Styloid Plate
6
-
-
2.4/2.7mm Distal Radius Column specific plates , rinm plates , pi plates
6
-
-
2.4/2.7mm Olecranon locking plate
6
-
-
3.5mm Mattaplate with 4 -14 hole, & Quadri lateral Plate Extension . The intrapelvic acetabular plate schould have pelvic brim plate with medial flange for quadrilatreral plate fixation . It should be insertable through aip approach
10
-
-
2.7 /2.4mm Distal Ulna Locking Plate
6
-
-
3.5mm proximal tibia Posteromedial Plate from 4 h to 10 holes
6
-
-
4.5mm Double angle blade plate. the angle blade plate should have multiple angles, 125-135 and multiple blade lengths 50-100. distal holes 4 TO 12 HOLES .case to case basis the supplier should be able to provide sizes which is needed
6
-
-
2.7mm Distal Fibula Locking Plate
10
-
-
3.5mm Medial distal Tibia low profile Locking Plate from 6 holes to 14 holes
10
-
-
3.5mm Posterior Malleolus Anatonical Plate
10
-
-
Patella Plates/Basket Plates
6
-
-
3.5mm anterolateral distal tibia plates of various lengths from 4 holes to 14 holes
6
-
-
2.4mm/2.7mm 4 Corner Fusion Plate for wrist
6
-
-
3.5mm proximal lateral tibia plates of various lengths from 4 holes to 14 holes
10
-
-
3.5mm pubic symphysis plate with 3 holes on eiither side
15
-
-
4.5mm PROXIMAL TIBIA low profile low bend hockey stick PLATE 4 TO 16 HOLES
10
-
-
95 degree angle blade plate 4 to 14 holes
10
-
-
125/13/135 degree single angle blade plate 50 to 100mm blade length .. Plate length 4 tio 12 holes
10
-
-
3.5mm recon plates 4 holes to 14 holes
10
-
-
locking recon 3.5mm 4 holes to 15 holes
5
-
-
lcp 4 hole to 14 holes 3.5mm straight
5
-
-
semitubular plate 3.5mm locking 4 to 14 hole
5
-
-
semitubular plate 3.5mm plain 4 to 14 hole
5
-
-
dhs of angles 125 /130 /135 degrees from 4 to 8 holes
5
-
-
knee arthrodesis nail of lenth 65 to 90 mm
5
-
-
3.5mm philos plate 2 hole to 10 hole
10
-
-
3.5mm proximal tibia medial T Plate from 4 h to 10 holes
10
-
-
3.5mm posterolateral extraarticular humerus anatomical locking j shaped hiockey stick plate
10
-
-
2.7mm/3.5mm distal humerus anatomical plates posterolateral(90/90), medial , lateral (parallel configuration )
10
-
-
2.7/3.5mm scapular lateral border anatomical plates
5
-
-
3.5mm olecranon hook plates
5
-
-
2.7mm clavicle anatomical plate
10
-
-
3.5mm Washer for screws
100
-
-
7mm Washer for screws
100
-
-
Steinmann Pin 3.5mm - Length 150mm
100
-
-
Steinmann Pin 3.5mm - Length 200mm
100
-
-
Steinmann Pin 4 mm - Length 150mm
100
-
-
Steinmann Pin 4 mm - Length 200mm
100
-
-
Steinmann Pin 5 mm - Length 250mm
100
-
-
3.5mm SS LCP - 6,7,8 holes
10
-
-
3.5mm SS Re-construction LCP - 6,7,8 holes
10
-
-
4.5mm Narrow LCP - 8,9,10,11 holes
5
-
-
4.5mm Broad LCP - 9,10,11 holes
5
-
-
3.5mm Non-Locking DCP - 7 Holes
10
-
-
3.5mm Non-Locking LCDCP - 7 Holes
10
-
-
Adult Conical Schanz Pin 4mm - 30, 40, 50, 60 Threaded
300
-
-
Adult Conical Schanz Pin 5mm - 30, 40, 50, 60 Threaded
300
-
-
Adult Conical Schanz Pin 6mm - 30, 40, 50, 60 Threaded
300
-
-
1.2mm K-Wire Non threaded
200
-
-
2mm K-Wire Non threaded
200
-
-
2.2mm K-Wire Non threaded
200
-
-
Evaluation Notes How It Works ?
Potential Partner
Select Your Requirements